Faxafdruk op volledige pagina - Connector World Trade · Blade HLL 4x0,5mm, length 1meter, bendable in any desired shape. -The HSGM STYROCUT 140 is a powerful thermal cutter for professionals

The HSG-OE is a thermal groove-cutter for the

professional and the DIYer.

It cuts profile grooves in Styrofoam, EPS, Tempex, Polystyrene &

Rigid Polyurethane foam boards in a very simple manner,

intented for cables, pipes, hoses etc.

HSGM HSG-OE

Heat up time 6-8 sec

Intermittent

operation:

12sec on/48sec off

Supply Voltage:

230V-50Hz

Power input: 90Watt

Supply cord 6mtr

with EU-plug

Easy replacement

of blades

Eliminates

styrofoam dust

No electrostatic

charging

Weight 1300 gram

(excl. blade)

Blade not included!

The HSG-OE comes

incl.

Suspension hook

Manual

The following blades are sold separately and fit the

HSGM HSG-OE

see specifications below

HSGM HSG-OE Item No. nr: 25.1.100

Item. No: 25.2.133

Item. No: 25.2.121

Item. No: 25.2.122

Blade N-1 14, curved shaped for Ø14mm grooves,

with depth guide (adjustable)





2

HSGM Heat-cutters for Styrofoam - Polystyrene - EPS - Tempex - Styropor


with depth guide (adjustable) Item. No: 25.2.120


HSGM HSG-OE


Item. No: 25.2.132

Item. No: 25.2.150

Item. No: 25.2.151

Blade N-2 B-30, angular shaped, for 30mm width

grooves, with depth guide (adjustable)

Item. No: 25.2.131 Blade N-2 B-25, angular shaped, for 25mm width




Item. No: 25.2.152

Blade A, for bossed grooves with depth guide.

See picture for measurements in mm.

Blade B, for bossed grooves with depth guide.


Blade C, for bossed grooves with depth guide.


3




Item. No: 25.2.123 Blase N-1 34, curved shaped for Ø34mm grooves,


The ENGEL-CUTTER is a robust universal thermal cutter for the

professional & the DIYer.

The ENGEL-CUTTER easily cuts through Styrofoam,

EPS, Tempex, Polystyrene & Rigid Polyurethane foam boards

up to 100mm thickness.

It can also power an assortment of special shaped blades

to cut out profile-grooves.

ENGEL-CUTTER

Heat up time 10sec

Intermittent

operation:

12sec on/48sec off

Supply Voltage:

230V-50Hz

Power input:

100Watt

Blade temperature:

max. 500ºC (930ºF)

Supply cord 3mtr

with EU-plug

Easy replacement

of blades

Eliminates

styrofoam dust

No electrostatic

charging

Weight 1025 gram

(incl. blade)

The ENGEL-CUTTER

comes incl.

1 x C-70 blade for

boards up to 70mm

thickness

1 Suspension hook

Manual

The following blades & adapters are sold separately and fit the

HSGM ENGEL-CUTTER


HSGM ENGEL-CUTTER Item. No: 25.1.010

Item. No: 25.2.010

Item. No: 25.2.020

Item. No: 25.2.050

Item. No: 25.2.060

Item. No: 25.2.070

Item. No: 25.2.090

Item. No: 25.2.080

Item. No: 25.2.100

Blade C-70, for board thicknesses up to 70mm


Blade CN-14, curved for 14mm grooves



Blade CR-20, curved for 20mm grooves,

with depth guide

Blade CS-20, angular shaped for 20mm grooves,

with depth guide

Blade CV-20, V-shaped for 20mm grooves,

with depth guide

4


Item. No: 25.2.295

H-A-CUTTER, this adapter cut grooves in all

shapes with the utmost precision up to 80mm

width.

Width guide included.

(ENGEL-CUTTER not included)

(blade not included)

Item. No: 25.2.301 Blade HLL 5x1,0mm, length 1meter,

bendable in any desired shape.

Item. No: 25.2.303

Blade is sharpened on both sides

5


Blade HLL 4x0,5mm, length 1meter,

bendable in any desired shape.

The HSGM STYROCUT 140 is a powerful thermal cutter for professionals.

The STYROCUT 140 cuts easily through Styrofoam,


up to 160 millimeter thickness.

It can also power an assortment of special shaped blades

to cut out profile-grooves.

STYROCUT 140

Heat up time 10sec

Intermittent

operation:

12sec on/48sec off

Supply Voltage:

230V-50Hz

Power input:

110Watt

Blade temperature:

max. 500ºC (930ºF)

Supply cord 3mtr

with EU-plug

Easy replacement

of blades

Eliminates

styrofoam dust

No electrostatic

charging

Weight 1025 gram

De STYROCUT 140

comes incl.

1 x C-140 blade for

boards up to 140mm

thickness

1 Suspension hook

Manual


STYROCUT 140.


Item. No: 25.2.030

Item. No: 25.2.020

Item. No: 25.2.050

Item. No: 25.2.060

Item. No: 25.2.070

Item. No: 25.2.090

Blade C-140,for board thicknesses up to 140mm






with depth guide


Item. No: 25.2.080

Item. No: 25.2.031

Blade CS-20, angular shaped for 20mm

grooves, with depth guide

6


STYROCUT 140 Item. No: 25.1.040


STYROCUT 140.


Item No: 25.2.049

Blade D68-61, this blade makes it possible to

cut a hole with a diameter of 68mm & a depth

of 61mm (adjustable), so you can install a

cavity wall mounting box.

On request, we can manufacture this blade in

various sizes!

7


The STYROCUT 180 Electronic is a comfortable, very light thermal cutter

for professionals, the craftsman and the DIYer.

The STYROCUT 180 Electronic cuts easily through Styrofoam,


boards up to 200 millimeter thickness,

and it is also very suitable for cutting special profile-grooves

in a very simple manner.

STYROCUT 180

Electronic

Heat up time 6sec

Intermittent

operation:

12sec on/48sec off

Supply Voltage:

230V-50Hz

Power input:

200Watt

Blade temperature:

max. 500ºC (930ºF)

Supply cord 3mtr

with EU-plug

Easy replacement

of blades

Eliminates

styrofoam dust

No electrostatic

charging

Weight 450 gram

(incl. blade),

very light !!!

The STYROCUT 180

Electronic

comes incl.

1 x C-180 blade for

boards up to 180mm

thickness

1 Suspension hook

Manual

1 Plastic tool case


STYROCUT 180 Electronic


HSGM STYROCUT 180 electronic Item. No: 25.1.060

Item. No: 25.2.020

Item. No: 25.2.030

Item. No: 25.2.031

Item. No: 25.2.040

Item. No: 25.2.110

Item. No: 25.2.050

Item. No: 25.2.060







Blade CN-20, curved voor 20mm grooves

8



STYROCUT 180 Electronic


Item. No: 25.2.070

Item. No: 25.2.090

Item. No: 25.2.080



with depth guide


with depth guide

Item. No: 25.2.049






various sizes!

9


The STYROCUT 230 is a comfortable, very light thermal cutter with

electronic powercontrol for an optimal adjustment of the

blade temperature.

For professionals, construction workers, the industry, craftsmen and

designers.

The STYROCUT 230 cuts easily through Styrofoam,


up to 230 millimeter thickness,

and it is also very suitable for cutting special profile grooves in a

very simple manner.

STYROCUT 230

Heat up time 10sec

Intermittent

operation:

12sec on/48sec off

Supply Voltage:

230V-50Hz

Power input:

230Watt

Blade temperature:

max. 500ºC (930ºF)

Supply cord 3mtr

with EU-plug

Easy replacement

of blades

Eliminates

styrofoam dust

No electrostatic

charging

Weight 600 gram

(incl. blade)

De STYROCUT 230

comes incl.

1 x DSS-220 blade

for boards up to

200mm thickness

1 x DSS-250 blade

for boards up to

230mm thickness

1 Brass brush

1 Screwdriver

Manual

1 Plastic tool case


STYROCUT 230

See specifications below

STYROCUT 230 Item No: 25.1.070

Item No: 25.2.118

Item No: 25.2.119

Item No: 25.2.149

Item No: 25.2.020

Item No: 25.2.030

Item No: 25.2.031

Blade DSS-200, for board thicknesses up to

180mm


200mm


230mm




10

Item No: 25.2.040 Blade C-180, for board thicknesses up to 180mm



STYROCUT 230


Item No: 25.2.070

Item No: 25.2.090

Item No: 25.2.080



with depth guide


with depth guide

Item No: 25.2.060 Blade CN-20, curved for 20mm grooves

Item No: 25.2.049






various sizes!


Item No: 25.2.110 Blade C-200, for board thicknesses up to

200mm

Item No: 25.2.117 Blade C-230, for board thicknesses up to

230mm

11

Item No: 25.2.150

Item No: 25.2.151

Item No: 25.2.152

Blade A for Bossed grooves, with depth guide.


Blade B for Bossed grooves, with depth guide.


Blade C for Bossed grooves, with depth guide.



Profile Section-adapter, suitable to cut individual grooves

into styrofoam.

As an accessory to the device type HSGM STYRO-CUT 230 (* Heat cutter type HSGM STYRO-CUT 230 not included)

Cuts grooves from 20 up to 150mm (adjustable)

Item No: 25.2.300

Profile Section-adapter, cuts grooves from

20 up to 150mm (adjustable)

(*the heat cutter and blade are not included!)

Item No: 25.2.301 Blade HLL 5x1,0mm - length 1 meter, bendable in

any desired shape.

12



any desired shape.

The HSGM STYROCUT G1-VW is a powerful professional thermal cutter

for “continuous operation” with electronic powercontrol for an

optimal adjustment of the blade temperature.

Developed for Professionals, The Construction Industry, Craftsmen etc.

The HSGM STYROCUT G1-VW cuts easily through Styrofoam,


up to 230 millimeter thickness.

It is also very suitable for cutting special profile-grooves in a

very simple manner.

HSGM STYROCUT G1-VW

Heat up time 8sec

Continous operation

(100%)

Blade temperature:

max. 600ºC(1112ºF)

Power input:

400Watt

Supply Voltage:

230V-50Hz

Highly flexible cable,

lenght 2mtr

(option 3mtr. max)

Easy replacement

of blades

Eliminates

styrofoam dust

Weight 6900 gram

(incl. bladeholder M)

The HGSM

STYROCUT

G1-VW

comes incl.

Bladeholder M incl.

cable (2 or 3m)

1 x C-180 blade for

boards up to 180mm

thickness

Manual


HSGM STYROCUT G1-VW

See specifications below

HGSM STYROCUT G1-VW Item No: 25.1.020 (incl. 2m cable)

HSGM STYROCUT G1-VW Item No: 25.1.030 (incl. 3m cable)

Item No: 25.2.010

Item No: 25.2.020

Item No: 25.2.030

Item No: 25.2.031

Item No: 25.2.040

Item No: 25.2.110

Item No: 25.2.117








13


Item No: 25.2.070

Item No: 25.2.090

Item No: 25.2.080

Item No: 25.2.100



with depth guide


with depth guide

Blade CV-20, V-shaped for 20mm grooves,

with depth guide



14

HSGM Thermische Styrofoam - Styropor - Polystyreen - Piepschuim Snijders

Item. No: 25.2.133

Item. No: 25.2.121

Item. No: 25.2.122








with depth guide (adjustable) Item. No: 25.2.120

Item. No: 25.2.123 Blase N-1 34, curved shaped for Ø34mm grooves,


15



HSGM STYROCUT G1-VW


Item. No: 25.2.132

Item. No: 25.2.150

Item. No: 25.2.151

Blade N-2 B-30, angular shaped, for 30mm width






Item. No: 25.2.152

Blade A, for bossed grooves with depth guide.


Blade B, for bossed grooves with depth guide.


Blade C, for bossed grooves with depth guide.




Item No: 25.2.300 Profile Section-adapter, cuts grooves from

20 up to 150mm wideness (adjustable).

(*the blade is not included!)


any desired shape






various sizes!

Item No: 25.2.049

16

Blade D124x20-50, this blade makes it possible to


of ca. 50mm (adjustable)

For PVC pipes etc.

(Custom-made product, deliverytime on request)

Item No: 25.2.048



any desired shape


HSGM STYROCUT G1-VW


HSGM

Important information concerning thermic Styrofoam cutters

The Styrofoam cutters are exclusively for the cutting of polystyrene and hard foam,

low flammable according to DIN 4102-1.

Fumes which may develop during the cutting process must be removed by working

in a room with an extraction fan.

PVC and PVC-layered materials should not be cut with this unit as the resultant fumes

are hazardous to one’s health.

Do not touch the blade while cutting or after the switch has been depressed to avoid

burnings.

Do not lean the manually operated tools against anything if the blades are not

completely cooled.

Always unplug the unit when not in use.

The Machines and tools shown in this catalog are just a small variety of our production.

We mainly manufacture special purpose machines but also supply components and

single parts to modify existing or newly purchased machines.

On request we manufacture specially constructed machinery, units and blades:

We also produce:

Rope & Sail Cutters

Textile Cutters

Rope and belt cutting machines

Machines cutting fabric in width

Machines cutting fabric in length

Thermal shape-cutting installations

Specialized units, devices and machines

Custom-made blades

HSGM Thermic Styrofoam Cutters

Worldwide Distributor of

HSGM & ENGEL

A. Hofmanweg 55

2031 BH Haarlem The Netherlands

Phone: +31(0)233030124

WhatsApp: +31(0)624558408

[email protected]

Visit our website

www.connectorworldtrade.com

www.hsgm.org

Documents

Faxafdruk op volledige pagina - Connector World Trade · Blade HLL 4x0,5mm, length 1meter, bendable in any desired shape. -The HSGM STYROCUT 140 is a powerful thermal cutter for professionals