1
Faster cuts, smoother handling, longer life. With the introduction of FORCE4 Cross-LINK, ICS continues to lead the industry with its next generation of concrete cutting chain. Using a system level design approach, each component is specifically engineered to improve chain stability and efficiency in the cut. The result is a chain that delivers our highest level of productivity and reduces operator fatigue. Leveraging more than 25 years of concrete cutting chain development, ICS has created an all-new highly engineered chain that delivers straighter, faster cuts with less time spent tensioning. FORCE4 Cross-LINK is your next advantage on the jobsite, helping your crews to get more done. Available for gas, hydraulic and pneumatic power cutters. Drive Links, Tie Straps and Segments work in concert to prevent reverse articulation and increase stability in the cut, providing a smoother cutting experience with less operator effort Full-house configuration allows for optimized diamond segments, improved cutting speed and increased diamond life Diamond segment laser welded to the drive link, giving you the strength and durability you depend on. The diamond segment is supported by 4 separate and adjacent tie straps during cutting, reducing chain stretch and guidebar wear with P/N Description MSRP 599881 ICS FORCE4 Cross-LINK chain 10 in (25cm) $ 950.00 599882 ICS FORCE4 Cross-LINK chain 15 in (38cm) $1,100.00 599883 ICS FORCE4 Cross-LINK chain 20 in (50cm) $1,290.00 599884 ICS FORCE4 Cross-LINK chain 25 in (63cm) $1,510.00 Effective January 1, 2019 | Copyright 2019 ICS | Blount Inc. Pricing and specifications subject to change without notice. All rights reserved. ICS, WallWalker, SpeedHook, SealPRO, FORCE4 and PowerGrit are registered trademarks of ICS. The best way to cut concrete, DCT, TSS, ProFORCE, and FORCE3 are trademarks of ICS. Rev: 1118. ICS, BLOUNT INC. HEADQUARTERS | 4909 SE International Way | Portland, OR 97222-4679 USA ICSDIAMONDTOOLS.COM | 800.321.1240

Faster cuts, smoother handling, longer life. - ICS Diamond Tools · 2020. 5. 11. · 599883 ICS FORCE4 Cross-LINK chain 20 in (50cm) $1,290.00 599884 ICS FORCE4 Cross-LINK chain 25

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

  • Faster cuts, smoother handling, longer life. With the introduction of FORCE4 Cross-LINK, ICS continues to lead the industry with its next generation of concrete cutting chain. Using a system level design approach, each component is specifically engineered to improve chain stability and efficiency in the cut. The result is a chain that delivers our highest level of productivity and reduces operator fatigue.

    Leveraging more than 25 years of concrete cutting chain development, ICS has created an all-new highly engineered chain that delivers straighter, faster cuts with less time spent tensioning. FORCE4 Cross-LINK is your next advantage on the jobsite, helping your crews to get more done. Available for gas, hydraulic and pneumatic power cutters.

    For P

    aten

    t Inf

    orm

    atio

    n vi

    sit

    icsd

    iam

    ondt

    ools

    .com

    /pat

    ents

    © 2

    018

    ICS

    | Blo

    unt I

    nc.

    Seal

    PRO

    is a

    regi

    ster

    ed

    trad

    emar

    k of

    ICS.

    Al

    l Rig

    ht R

    eser

    ved

    WAR

    NIN

    GTh

    is p

    rodu

    ct c

    an e

    xpos

    eyo

    u to

    che

    mic

    als

    incl

    udin

    gco

    balt

    whi

    ch is

    kno

    wn

    toth

    e St

    ate

    of C

    alifo

    rnia

    toca

    use

    canc

    er a

    nd1,

    3- b

    utad

    iene

    whi

    ch is

    know

    n to

    the

    Stat

    e of

    Calif

    orni

    a to

    cau

    se c

    ance

    ran

    d bi

    rth

    defe

    cts

    orot

    her r

    epro

    duct

    ive

    harm

    .Fo

    r mor

    e in

    form

    atio

    n go

    to w

    ww.

    P65W

    arni

    ngs.

    ca.g

    ov.

    ICS

    | Blo

    unt,

    Inc

    4909

    SE

    Inte

    rnat

    iona

    l Way

    Port

    land

    OR

    9722

    2 • U

    SA

    icsd

    iam

    ondt

    ools

    .com

    Drive Links, Tie Straps and Segments work in concert to prevent reverse articulation and

    increase stability in the cut, providing a smoother cutting experience with less operator effort

    Full-house configuration allows for optimized diamond segments, improved cutting

    speed and increased diamond life

    Diamond segment laser welded to the drive link, giving you the strength and durability

    you depend on.

    The diamond segment is supported by 4 separate and

    adjacent tie straps during cutting, reducing chain

    stretch and guidebar wear

    with

    P/N Description MSRP

    599881 ICS FORCE4 Cross-LINK chain 10 in (25cm) $ 950.00

    599882 ICS FORCE4 Cross-LINK chain 15 in (38cm) $1,100.00

    599883 ICS FORCE4 Cross-LINK chain 20 in (50cm) $1,290.00

    599884 ICS FORCE4 Cross-LINK chain 25 in (63cm) $1,510.00

    Effective January 1, 2019 | Copyright 2019 ICS | Blount Inc. Pricing and specifications subject to change without notice. All rights reserved. ICS, WallWalker, SpeedHook, SealPRO, FORCE4 and PowerGrit are registered trademarks of ICS. The best way to cut concrete, DCT, TSS, ProFORCE, and FORCE3 are trademarks of ICS. Rev: 1118.ICS, BLOUNT INC. HEADQUARTERS | 4909 SE International Way | Portland, OR 97222-4679 USA

    icsdiamondtools.com | 800.321.1240