Fan Coil Units - Heinen & Hopman...siGMa fan coil units • Fan coil unit with casing • Heating and cooling applications • Capacity: 0.6 kW - 11.7 kW SIGMA fan coils units can

>

Ventilation Air Conditioning RefrigerationHeating

PROVIDED BYHEINEN & HOPMAN

Inside22ºC

OUTSIDE35°C45°C

HUMIDITY90%40%

productsFan coil units

Our mission:To ensure you the

perfect climate indoors, regardless of theweather outside.

“ “

Fan COil uniTs

Heinen & Hopman fan coils units are designed to operate in the marine industry where high standards are required.

Types - SIGMA: Fan coil unit with casing. Capacity: 0,6 kW - 11.72 kW - PRISMA: Fan coil unit with casing. Capacity: 0.6 kW - 3.90 kW - LOW BODY: Fan coil unit with or without casing, designed for instal-lation in small niches. Capacity: 0.6 kW - 3.90 kW. - CONCEALED: Fan coil unit without casing. Capacity: 0.6 kW - 11.72 kW.- ATL: Fan coil unit designed for Yacht sector.- Custom made: Fan coil unit designed on customer request.

Green technology

Energy-saving technology is applied to our fan coil units to obtain extremely low electrical absorption and a continuous modulation of the air flow, related to the energy needs in the room.Energy-saving technology is composed by a brushless motor combined with an inverter, managed by specific regulators.Compared to units with asynchronous 3-speed motors, the fan coil units with brushless motors will reduce the power consumption up to 70%.

EST

W80%

70%

60%

50%

40%

30%

20%

10%

0%

W80%

70%

60%

50%

40%

30%

20%

10%

0%

EST (Energy Saving Technology) is applied to the EURAPO fan coil units and cassette units. It permits to

obtain extremely low electrical absorption and a continuous modulation of the air flow, constantly related to the

concrete need of energy in the room.

EST technology is composed by a brushless motor combined to a dedicated electronic device (inverter),

managed by specific regulators developed by EURAPO.

In comparison to the traditional units equipped with asynchronous three-speed-motors, the fan coil and cassette

units with brushless motors can obtain a considerable energy saving, by reducing the power consumption up to 70%.

Thanks to the step-less modulation of the fan speeds it is possible to accurately regulate the air volume in a very

precise way, in strict relation to the real need of air conditioning in the room. Oscillations in the temperature and

relative humidity are reduced at lowest level: a guarantee for the highest comfort in the room.

The possibility to reach very low air volumes makes the units extremely quiet at the lowest motor revolutions.

EST technology is designed in particular for offices, hospitals, nursing homes and hotels.

It is available for the EURAPO range of fan coil units, cassette units and ducted units.

The EST technology consists of a brushless motor combined to a dedicated electronic device (inverter),

managed by specific regulators. The controller uses a modulating signal with 0-10Vdc tension in order to regulate

the fan speed.

The brushless electric motor is composed by a rotor having permanent magnets, whose magnetic fields

interact with the ones produced by the stator winding.

The transfer of current is no longer by mechanical commutation (sliding contacts) but by an electronic commutation

system: an electronic controller (inverter) powers the motor’s stator and generates rotating magnetic fields, that

determine the rotor’s speed.

speed 6

Energy saving with EST fancoil

speed 5 speed 4 speed 3 speed 2 speed 1

m3/h m3/h

speed 6

Asynchronous fan coil absorption (W)

EST fancoil absorption (W)

speed 5

speed 4

speed 3

speed 2

speed 1

EST

siGMa fan coil units

• Fan coil unit with casing• Heating and cooling applications• Capacity: 0.6 kW - 11.7 kW

SIGMA fan coils units can be used in all environments and for different applications. The fan coil units are highly reliable in performance.The fan coil units can be installed on the floor or on the ceiling in both configurations.

Casing

The casing, with upper air outlet, is made of sheet steel and painted with oven-dried epoxy powders, available in all RAL colors.The access doors and grilles are made of white heat-resistant ABS and can be turned into all four directions.The filter is fully retractable and easily accessible.

Models Dimensions and weight Model: SV - SV/AF - SH - SH/AF

Alternatives available on request.Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

110 112 114 216 218 220 222 224 226 228

A 648 773 898 1023 1148 1273 1273 1523 1523 1773

B 538 538 538 538 538 614 614 614 614 614

SV-- --SH

C 224 224 224 224 224 254 254 254 254 254

kg 18 20 23 28 31 41 44 52 52 58

SV/AF-- --SH/AF

C 233 233 233 233 233 263 263 263 263 263

kg 19 21 24 30 32 43 46 54 54 61

B

A C

Dimensions (mm) and weight for SV - SV/AF - SH - SH/AF

110 112 114 216 218 220 222 224 226 228 A 648 773 898 1023 1148 1273 1273 1523 1523 1773 B 538 538 538 538 538 614 614 614 614 614 SV - SH C 224 224 224 224 224 254 254 254 254 254 Kg 18 20 23 28 31 41 44 52 52 58 SV/AF - SH/AF C 233 233 233 233 233 263 263 263 263 263 Kg 19 21 24 30 32 43 46 54 54 61 HYDRAULIC CONNECTION 1/2” G F

Dimensions (mm) and weight for PV - PV/AF - PH - PH/AF

110 112 114 216 218 A 648 773 898 1023 1148 B 560 560 560 560 560 PV - PH C 226 226 226 226 226 Kg 17 20 23 27 31 PV/AF - PH/AF C 235 235 235 235 235 Kg 18 21 24 28 32 HYDRAULIC CONNECTION 1/2” G F

SIGMA PRISMA

FAN

CO

IL U

NIT

mod. SH mod. PHmod. SH/AF mod. PH/AF

mod. SV

mod. SV mod. PV

mod. SH/AF mod. PH/AF

mod. PVmod. SV/AF mod. PV/AF


PRisMa fan coil units

• Fan coil unit with casing• Heating and cooling applications (PV and PV/AF only)• Capacity: 0.6 kW - 3.9 kW

The PRISMA fan coil units have an original shape. The casing is a piece of furniture, made of painted metal sheet with side flaps and grilles made of ABS.The fan coil units can be installed on the floor or on the ceiling. The air intake can be located on the bottom or on the front in both configurations.

Casing

The casing, with upper air outlet, is made of sheet steel and painted with oven-dried epoxy powders, available in all RAL colors.The access doors and grilles are made of white heat-resistant ABS and can be turned into all four directions. The filter is fully retractable and easily accessible.

Models Dimensions and weight

Model: PV - PV/AF - PH - PH/AF

110 112 114 216 218

A 648 773 898 1023 1148

B 560 560 560 560 560

PV-- --PH

C 226 226 226 226 226

kg 17 20 23 27 31

PV/AF-- --PH/AF

C 235 235 235 235 235

kg 18 21 24 28 32

B

A C

Dimensions (mm) and weight for SV - SV/AF - SH - SH/AF

110 112 114 216 218 220 222 224 226 228 A 648 773 898 1023 1148 1273 1273 1523 1523 1773 B 538 538 538 538 538 614 614 614 614 614 SV - SH C 224 224 224 224 224 254 254 254 254 254 Kg 18 20 23 28 31 41 44 52 52 58 SV/AF - SH/AF C 233 233 233 233 233 263 263 263 263 263 Kg 19 21 24 30 32 43 46 54 54 61 HYDRAULIC CONNECTION 1/2” G F

Dimensions (mm) and weight for PV - PV/AF - PH - PH/AF

110 112 114 216 218 A 648 773 898 1023 1148 B 560 560 560 560 560 PV - PH C 226 226 226 226 226 Kg 17 20 23 27 31 PV/AF - PH/AF C 235 235 235 235 235 Kg 18 21 24 28 32 HYDRAULIC CONNECTION 1/2” G F

SIGMA PRISMA

FAN

CO

IL U

NIT

mod. SH mod. PHmod. SH/AF mod. PH/AF

mod. SV

mod. SV mod. PV

mod. SH/AF mod. PH/AF

mod. PVmod. SV/AF mod. PV/AF


lOW BODY fan coil units

• Fan coil unit with casing• Heating and cooling applications• Capacity: 0.48 kW - 3.7 kW

The LOW BODY fan coils units have a reduced height (427 mm) and can be installed in small niches.The low-body units have an upper air outlet and a front air intake. The fan coil units can be installed either on the floor or on the wall, or concealed.

Casing

The inner frame is made of galvanized steel. The casing is made of sheet steel and painted with oven-dried epoxy powders, available in all RAL colors.The access doors and grilles are made of white heat-resistant ABS and can be turned into all four directions.


Model: CVR

Model: SVR

110 112 114 216 218

A 555 680 805 930 1055

B 395 395 395 395 395

C 230 230 230 230 230

kg 9 11 14 16 19

110 112 114 216 218

A 648 773 898 1023 1148

B 430 430 430 430 430

C 254 254 254 254 254

kg 15 17 22 23 26

Dimensions (mm) and weight for CV - CV/AF - CH - CH/AF

110 112 114 216 218 220 222 224 226 228 CV - CH A 555 680 805 930 1055 1180 1180 1430 1430 1680 CV/AF -CH/AF A 574 699 824 949 1074 1199 1199 1449 1449 1699 CV - CV/AF - CH - CH/AF B 505 505 505 505 505 581 581 581 581 581 C 215 215 215 215 215 245 245 245 245 245 Kg 10 13 16 19 22 29 31 38 38 42HYDRAULIC CONNECTION 1/2” G F

CONCEALED

Dimensions (mm) and weight CVR

110 112 114 216 218 A 555 680 805 930 1055 B 395 395 395 395 395 C 230 230 230 230 230Kg 9 11 14 16 19HYDRAULIC CONNECTION 1/2” G F

Dimensions (mm) and weight SVR


LOW BODY

mod. CH mod. CH/AFmod. SVR

mod. CH

mod. CV/AFmod. CVR

mod. SVR

mod. CV mod. CV/AF

mod. CVR


COnCEalED fan coil units

• Fan coil unit without casing• Heating and cooling applications• Capacity: 0.6 kW - 11.72 kW

The CONCEALED fan coils units can be used for ductwork installations. The fan coil units are highly reliable in performance, silent and can be equipped with a wide range of accessories.The fan coil units can be installed vertically, on the wall (with bottom air intake) or on the floor (with front air intake), and horizontally, on the ceiling (with bottom or rear air intake).The fan coil units are the ideal solution for the needs of small spaces and limited sizes that influence the choice of furniture in homes or offices.

Casing

Available in ten sizes, the concealed model has an electric box with terminal board and auxiliary drain pan. The frame is made of galvanized steel. The inner sides are completely lined with an insulating self-extinguishing material.


Model: CV - CV/AF - CH - CH/AF

110 112 114 216 218 220 222 224 226 228

CV-- --CH

A 555 680 805 930 1055 1180 1180 1430 1430 1680

CV / AF-- --CH / AF

A 574 699 824 949 1074 1199 1199 1449 1449 1699

CV-- --CV / AF --CH-------- --CH / AF

B 505 505 505 505 505 581 581 581 581 581

C 215 215 215 215 215 245 245 245 245 245

kg 10 13 16 19 22 29 31 38 38 42

Dimensions (mm) and weight for CV - CV/AF - CH - CH/AF

110 112 114 216 218 220 222 224 226 228 CV - CH A 555 680 805 930 1055 1180 1180 1430 1430 1680 CV/AF -CH/AF A 574 699 824 949 1074 1199 1199 1449 1449 1699 CV - CV/AF - CH - CH/AF B 505 505 505 505 505 581 581 581 581 581 C 215 215 215 215 215 245 245 245 245 245 Kg 10 13 16 19 22 29 31 38 38 42HYDRAULIC CONNECTION 1/2” G F

CONCEALED

Dimensions (mm) and weight CVR


Dimensions (mm) and weight SVR


LOW BODY

mod. CH mod. CH/AFmod. SVR

mod. CH

mod. CV/AFmod. CVR

mod. SVR

mod. CV mod. CV/AF

mod. CVR

(1) Sound pressure level in a 100 m3 room, at a 1.5m distance and with a reverberating time of 0.3 s.(2) Electrical supply: 230-1-50 [V-ph-Hz].* Minimum value measurable in laboratory, indicated by Eurovent.

Cooling

Air

tem

pera

ture

: 2

7 0

C d

.b.,

19

0C

w

.b.

Wat

er t

empe

ratu

re:

7 /

12

0C Total cooling capacity (kW)

Sensible cooling capacity (kW)

Water flow (l/h)

Pressure drop (kPa)

Heatin

g

Air

tem

pera

ture

: 2

0 0

C

Wat

er in

let

tem

pera

-tu

re:

50

0C

Heating capacity (kW)

Water flow (l/h)

Pressure drop (kW)

Heatin

g

Air

tem

pera

ture

: 2

0 0

C

Wat

er in

let

tem

pera

ture

: 7

0 /

60

0C


Water flow (l/h)

Pressure drop (kPa)

Further d

ata

Air volume (m3/h)

Sound power level (dB[A])

Sound pressure level (dB[A]) (1)

Power input (W) (2)

Absorbed current (A) (2)

Water content (l)

112 114 216 220 222 224 228

9V 1.91 2.90 3.60 5.01 6.06 8.11 10.50

6V 1.35 2.15 2.55 3.75 4.50 5.71 7.30

3V 0.63 1.02 1.18 1.98 2.03 3.21 4.30

9V 1.57 2.39 2.84 4.04 4.97 6.49 7.90

6V 1.08 1.70 1.92 2.91 3.55 4.57 5.40

3V 0.49 0.49 0.91 1.50 1.61 2.45 3.00

9V 328 498 618 860 1120 1392 1802

6V 232 369 438 643 793 980 1253

3V 108 175 202 340 408 551 738

9V 8.90 8.40 13.20 28.30 17.10 24.10 42.30

6V 4.80 4.70 7.30 17.40 8.40 12.90 25.00

3V 1.40 1.60 1.80 5.60 7.70 4.30 10.20

9V 2.64 4.08 5.16 6.35 8.01 9.92 10.80

6V 1.90 2.71 3.77 4.72 5.49 6.71 8.20

3V 0.98 1.27 2.07 2.42 2.76 4.22 5.30

Value as Cooling accordingly to the Eurovent Standards and UNI ENV 1397 Norm

9V 3.70 7.30 12.90 23.30 26.00 22.80 39.80

6V 2.60 3.50 7.10 17.60 7.20 10.70 23.00

3V 2.10 1.50 1.80 4.40 6.30 3.50 8.70

9V 4.56 7.04 8.85 10.76 13.84 16.73 17.84

6V 3.27 4.61 6.52 7.97 10.13 11.24 13.68

3V 1.69 2.17 3.57 4.06 5.24 7.11 8.91

9V 400 619 777 945 1216 1469 1566

6V 287 405 572 700 890 987 1202

3V 149 190 314 357 460 625 783

9V 5.30 10.70 19.20 26.80 33.00 24.30 29.70

6V 3.80 4.00 11.30 19.80 8.60 10.50 20.50

3V 3.70 1.70 3.80 4.60 7.60 4.20 9.30

9V 432 583 791 1010 1305 1828 2050

6V 286 379 523 675 857 1200 1330

3V 128 172 248 323 403 582 620

9V 56 57 61 57 63 67 70

6V 45 49 50 46 57 57 61

3V 31 30 34 30 37 45 41

9V 46 48 51 48 53 58 60

6V 36 40 41 37 48 48 52

3V 30* 30* 30* 30* 30* 36 32

9V 31 48 52 50 104 170 230

9V 0.28 0.42 0.46 0.44 0.88 1.37 1.70

V 0.79 1.05 1.31 2.20 2.20 2.84 3.47

NOTE:Performances of LOW BODY models are about 11% lower than the standard ones in heating operation and 12,3% lower in cooling operation. For greater accuracy please contact Heinen Hopman.

To obtain capacities for 2 or 4 row coils, or for conditions different from standard ones, please contact our staff.

The printed data could be modified without any notice.

TECHNICAL DATA (3 rows - Energy saving technology)

Cooling

Air

tem

pera

ture

: 2

7 0

C d

.b.,

19

0C

w

.b.

Wat

er t

empe

ratu

re:

7 /

12

0C Total cooling capacity (kW)

Sensible cooling capacity (kW)

Water flow (l/h)

Pressure drop (kPa)

Heatin

g

Air

tem

pera

ture

: 2

0 0

C

Wat

er in

let

tem

pera

-tu

re:

50

0C


Water flow (l/h)

Pressure drop (kW)

Heatin

g

Air

tem

pera

ture

: 2

0 0

C

Wat

er in

let

tem

pera

ture

: 7

0 /

60

0C


Water flow (l/h)

Pressure drop (kPa)

Further d

ata

Air volume (m3/h)

Sound power level (dB[A])

Sound pressure level (dB[A]) (1)

Power input (W) (2)

Absorbed current (A) (2)

Water content (l)

110 112 114 216 218 220 222 224 226 228

MAX 1.16 1.64 2.20 3.36 3.58 4.53 5.19 6.57 7.41 9.50

MED 0.99 1.35 1.92 2.72 3.05 3.75 4.48 5.87 6.81 7.75

MIN 0.79 1.10 1.60 2.24 2.50 2.99 3.91 4.70 5.61 6.18

MAX 0.98 1.30 1.96 2.52 3.14 3.62 4.54 5.20 5.86 7.02

MED 0.82 1.03 1.68 2.00 2.57 2.91 3.83 4.56 5.32 5.53

MIN 0.64 0.82 1.36 1.60 2.04 2.25 3.27 3.53 4.26 4.27

MAX 199 281 414 577 614 777 891 1127 1271 1630

MED 170 232 360 467 524 643 769 1007 1168 1330

MIN 136 189 300 366 429 513 671 806 963 1060

MAX 3.40 7.10 5.80 14.80 13.60 24.10 28.40 18.80 21.00 16.90

MED 2.80 5.00 4.60 12.50 9.80 17.40 21.80 15.50 18.10 25.80

MIN 2.00 3.40 3.30 8.50 6.70 11.60 17.20 10.50 12.80 17.30

MAX 1.57 2.16 3.05 4.11 4.95 5.74 7.19 7.83 9.33 10.70

MED 1.28 1.73 2.43 3.44 4.16 4.65 6.08 6.94 8.51 8.60

MIN 1.00 1.35 2.00 2.75 3.35 3.61 5.25 5.45 6.86 6.74

Value as Cooling accordingly to the Eurovent Standards and UNI ENV 1397 Norm

MAX 2.70 6.10 4.80 11.90 12.50 20.00 23.50 15.50 20.50 34.60

MED 2.30 4.70 3.70 8.50 9.10 14.30 18.00 12.70 17.60 24.20

MIN 1.70 3.10 2.80 5.70 6.30 9.50 14.20 8.70 12.40 16.30

MAX 2.74 3.70 5.20 6.93 8.48 9.64 12.25 13.19 15.77 17.83

MED 2.23 2.94 4.09 5.82 7.12 7.85 10.32 11.66 14.38 14.35

MIN 1.74 2.28 3.37 4.65 5.71 6.04 8.93 9.15 11.58 11.22

MAX 241 325 456 608 745 847 1076 1159 1385 1566

MED 196 258 359 511 625 689 907 1024 1263 1260

MIN 153 201 396 408 502 531 784 804 1017 985

MAX 2.80 7.80 5.60 12.70 17.30 22.60 32.20 15.70 23.10 30.90

MED 2.90 5.60 3.60 9.80 12.20 15.60 23.50 12.60 19.60 21.10

MIN 2.10 3.40 2.60 6.20 8.10 9.70 18.20 8.30 13.20 13.70

MAX 245 320 436 580 709 856 1074 1254 1481 1687

MED 191 249 358 456 592 676 920 1113 1352 1151

MIN 144 194 289 338 474 527 739 797 999 838

MAX 48 50 54 53 55 54 60 60 63 67

MED 42 45 49 47 50 48 56 55 60 60

MIN 36 38 42 40 43 40 50 47 53 55

MAX 39 41 44 44 46 44 50 49 53 57

MED 33 36 39 38 42 38 45 47 54 50

MIN 30 30 33 31 34 31 40 40 44 45

MAX 46 45 57 61 86 90 117 140 162 178

MAX 0.23 0.23 0.26 0.29 0.33 0.38 0.52 0.65 0.65 1.04

0.53 0.79 1.05 1.31 1.57 2.20 2.20 2.84 2.84 3.47

TECHNICAL DATA (3 rows - asynchronous)

(1) Sound pressure level in a 100 m3 room, at a 1.5m distance and with a reverberating time of 0.3 s.(2) Electrical supply: 230-1-50 [V-ph-Hz].* Minimum value measurable in laboratory, indicated by Eurovent.

Model ATL6DC ATL9DC ATL12DC ATL18DC ATL24DC ATL36DC

Capacity (kW) 1.76 2.64 3.52 5.27 7.03 10.54

V @ 50/60Hz / 1-Phase 230 230 230 230 230 230

Amps (FLA) Cool 1.4 1.4 2.8 2.8 3.9 7.8

Amps (FLA) Blower 1.4 1.4 2.8 2.8 1.5 3

Optional heater (kW) (1) 1 1 1.5 1.5 1.5 3

Heater Amps (A) 5.7 5.7 11.5 11.5 8 16

Max. Circuit breaker (A) 5 5 5 5 5 30

Min. Circuit breaker (A) 2 2 4 4 5 23

Water flow (GPM / I / min) 1.5 / 5.7 2.25 / 8.6 3 / 11.4 4.5 / 17.1 6 / 22.8 9 / 34.1

Air flow (CFM / m3/h) (2) 200 / 340 233 / 396 350 / 595 467 / 793 670 / 1139 1000 / 1700

External static pressure (H20 / Pa) 1.75 / 435 0.6 / 149 1.75 / 435 0.6 / 149 0.3 / 75 0.3 / 75

Height deck mount (in / mm) (3) 8 / 204 8 / 204 8 / 204 8 / 204 10 / 254 10 / 254

Height suspension mount (in / mm) (3) 8.2 / 209 8.2 / 209 8.2 / 209 8.2 / 209 10.1 / 257 10.1 / 257

Max. Width (in / mm) (3) 19.6 / 498 19.6 / 498 31.5 / 801 31.5 / 801 43.8 / 1113 61.8 / 1570

Depth without heat (in / mm) (3) 19.7 / 501 19.7 / 501 17.9 / 455 17.9 / 455 20.5 / 521 20.5 / 521

Depth with heat (in / mm) (3) 25.4 / 646 25.4 / 646 23.6 / 600 23.6 / 600 26.2 / 666 26.2 / 666

Drain connection type tube stubs FPT tube stubs tube stubs tube stubs tube stubs

Drain connection size ½” ½” ½” ½” ½” ½”

Chilled water connection type FPT FPT FPT FPT FPT FPT

Chilled water connection size ½” ½” ½” ½” ½” ½”

Quantity duct connections (in/mm) 1 1 2 2 1 2

Minimum supply duct size (in/mm) (4) 4 / 102 6 / 153 6 / 153 7 / 178 9 / 229 10 / 254

Minimum supply air grill size (in2 / cm2) 35 / 226 49 / 316 35 / 226 49 / 316 147 / 949 168 / 1084

Total return air inlet (in2 / cm2) 70 / 452 98 / 633 130 / 839 200 / 1291 240 / 1549 360 / 2323

Pan style Sloped Sloped Sloped Sloped Sloped Sloped


aTl-DC low profile fan coil units

The ATL-DC fan coil units are used in areas with reduced heights and an excellent choice for the yacht sector. The ATL-DC units represents an improved design approach to low profile, allow easier maintenance access and reduced dimensions overall.The drain pan has an anti-slosh, anti-fungal foam lining and extends to under the valve motor and plumbing. The water connections are insulated against secondary condensation. The valve can be installed to the left or to the right.

advantages

• Blowers are extremely silent yet powerful enough to overcome high-static-pressure duct;• Improved design for easy servicing, smaller dimensions;• Top panel is removable for easier access;• Dual blowers are installed horizontally for exceptionally low profile;• Suspension from above or support from beneath (hardware included);• Internal components are insulated against secondary condensation;• Vibration isolation mounts reduce noise and vibration;• Bypass valve has removable power head for easy servicing;• Optional flow control automatically balances circulated water throughout the system.• Optional electric heater

Dimensions1 1.5kW is recommended for the ATL24 because it has one blower. 2kW is maximum.2 Air flow data is for units without electric heat. Electric heat reduces air flow by amount to be determined.3 All dimensions ±0.3 inch (8mm).4 ATL 12, ATL18 and ATL36 models have dual blowers and therefore two supply duct rings.


Model ATL6 HV ATL9 HV ATL12HV ATL18HV ATL24HV

Capacity (kW) 1.76 2.64 3.52 5.27 7.03

V @ 50/60Hz / 1-Phase 230 230 115 230 230 115 230

Amps (FLA) Cool 0.9 0.6 3.12 1.8 1.8 2.3 1.15

Amps (FLA) Blower 0.7 0.5 3.2 1.4 1 3.4 1.3

Optional heater (kW) (1) 1 1 2 2 1.5

Heater Amps (A) 5 4.8 20.6 10.1 9.7 16.4 7.8

Max. Circuit breaker (A) 5 5 5 5 5

Min. Circuit breaker (A) 2 1 4 3 3 3 2

Water flow (GPM / I / min) 1.5 / 5.7 2.25 / 8.6 3 / 11.4 4.5 / 17.1 6 / 22.8

Air flow (CFM / m3/h) (2) 200 / 340 233 / 396 350 / 595 467 / 793 730 / 1241

External static pressure (H20 / Pa) 0.3 / 75 0.3 / 75 0.3 / 75 0.3 / 75 0.3 / 75

Height deck mount (in / mm) (3) 8 / 204 8 / 204 8.1 / 206 8.1 / 206 10 / 254

Height suspension mount (in / mm) (3) 8.1 / 206 8.1 / 206 8.1 / 206 8.1 / 206 10.1 / 257

Max. Width (in / mm) (3) 19.6 / 498 19.6 / 498 31.6 / 803 31.6 / 803 42.9 / 1090

Depth without heat (in / mm) (3) 18 / 458 19.7 / 501 17.9 / 455 25.5 / 648 22 / 559

Depth with heat (in / mm) (3) 23.7 / 602 25.4 / 646 23.6 / 600 19.8 / 503 27.7 / 704

Drain connection type tube stubs FPT tube stubs tube stubs tube stubs

Drain connection size ½” ½” ½” ½” ½”

Chilled water connection type FPT FPT FPT FPT FPT

Chilled water connection size ½” ½” ½” ½” ½”

Quantity duct connections (in/mm) 1 1 2 2 1

Minimum supply duct size (in/mm) (4) 4 / 102 6 / 153 6 / 153 7 / 178 9 / 229

Minimum supply air grill size (in2 / cm2) 35 / 226 49 / 316 35 / 226 49 / 316 147 / 949

Total return air inlet (in2 / cm2) 70 / 452 98 / 633 130 / 839 200 / 1291 240 / 1549

Pan style Sloped Sloped Sloped Sloped Sloped

Dimensions

1 1.5kW is recommended for the ATL24 because it has one blower. 2kW is maximum.2 Air flow data is for units without electric heat. 3 All dimensions ±0.3 inch (8mm).4 ATL 12, ATL18 and ATL36 models have dual blowers and therefore two supply duct rings.

aTl-HV low profile fan coil units

The ATL-HV fan coil units are ideal for height-restrictive installations; high velocity blowers. The ATL-HV units represents an improved design approach to low profile, allow easier maintenance access and reduced dimensions overall.The drain pan has an anti-slosh, anti-fungal foam lining and extends to under the valve motor and plumbing. The water connections are insulated against secondary condensation. The valve can be installed to the left or to the right.

advantages

• Blowers are extremely quiet yet powerful enough to overcome high- static-pressure duct;• Suspension from above or support from beneath (hardware included);• Internal components are insulated against secondary condensation;• Vibration isolation mounts reduce noise and vibration;• Bypass valve has removable power head for easy servicing;• Automatically flow control helps balance chilled water distrubution throughout the boat. • Optional electric heater

Alternatives available on request.Due to continued product development, Heinen & Hopman reserves the right to introduce alternations without prior notice.

Model (1) AU6DC AU9DC AU12DC AU18DC AU24DC

Capacity (kW) 1.76 2.64 3.52 5.27 7.03

V @ 50/60Hz / 1-Phase 230 230 230 230 230

Amps (FLA) Cool 1.4 1.4 3.17 3.9 3.86

Amps (FLA) Blower 1.4 1.4 3.2 3.9 3.9

Optional heater (kW) 1 1 1.5 3 3

Heater Amps (A) 5.75 7.92 9.69 17 16.9

Max. Circuit breaker (A) 10 10 15 20 20

Min. Circuit breaker (A) 7 9 11 18 18


Air flow (CFM / m3/h) 200 / 340 300 / 510 400 / 680 600 / 1020 700 / 1170

External static pressure (H20 / Pa) 2.9 / 722.1 2.8 / 697.2 2.6 / 647.4 2.1 / 522.9 1.4 / 348.6

Chilled water pressure drop (PS) 1.1 4.4 8 4.6 11

Max. Height (in / mm) (2) 11.7/298 13.4 / 341 13.4 / 341 14.4 / 366 15.5 / 394

Max. Width (in / mm) (2) 14.4/366 16.4 / 417 16.4 / 417 19.9 / 506 22.4 / 569

Max. Depth (in / mm) (2) 14/356 14 / 356 16.7 / 425 17.3 / 440 17.3 / 440

Drain connection type FPT FPT FPT FPT FPT

Drain connection size ½” ½” ½” ½” ½”

Chilled water connection type FPT FPT FPT FPT FPT

Chilled water connection size ½” ½” ½” ½” ½”

Quantity duct connections (in/mm) 1 1 2 2 1

Minimum supply duct size (in/mm) 5 / 125 6 / 153 6 / 153 7 / 178 8 / 204


Total return air inlet (in2 / cm2) 70 / 452 98 / 633 130 / 839 200 / 1291 240 / 1549

Gross Weight (lbs/kg) (3) 31 / 14.1 35 / 15.9 42 / 19.1 54 / 24.5 58 / 26.4

au-DC fan coil units

The AU-DC fan coil units are designed for easy installation and high performance. AU-DC models feature ultra-quite blowers that are strong enough to overcome high static pressure. The composite drain pan quickly removes condensate water. Each drain hole is reinforced and has an external stop to prevent over tightening of the screw-in hose barb. Straight or 90-degree hose barbs may be used to better accommodate a variety of installation situations. The blower inlet adapter is made of a high temperature resin to easy withstand the heat generated by the optional internal electric heating element. The manual heater-overload safety switch is easily accessible without disassembling the unit.

advantages

• Rust-free composite drain pan• Drain pan features anti-slosh, ‘positive-flow’ drain channels for no spills and rapid removal of condensate;• Blowers are extremely quiet yet powerful enough to overcome high-static-pressure duct;• Single adjustment screw for 270° of blower rotation;• Blower can be rotated to straight down position for overhead applications;• Vibration isolation mounts reduce noise and vibration;• Flexible mounting options;• Optional flow control automatically balances circulated water throughout the system.• Optional electric heater• Optional EU package upgrades includes several upgrades for reduced installation time and improved appearance (contact us for more details).

Dimensions 1 Model numbers shown are for 115V units with brushless blowers. Add a ‘Z’ for 230V units; add a ‘FC’ for optional control; add a ‘-L’ or ‘-R’ for valve position (relative to the coil) and angle of the blower; add a ‘_kW’ for amount of optional electric heat in kW (for ex. 1.5kW)2 All dimensions ±0.3 inch (8mm).3 Without electric heat option, subtract 3lbs (1.4kg) from unit weight for each heater element.

au-HV fan coil units

The AU-HV fan coil units are designed for easy installation and high performance. The AU-HV fan coil units feature high velocity (HV) blowers.The positive flow drain pan quickly removes condensate water. Each drain hole is reinforced and has an external stop to prevent over tightening of the screw-in hose barb. To be better accommodate a variety of installation, each drain can accept either a straight or 90° hose barb.Due to the rotatable blower ring, the blower can be rotated easily 270°. The blower inlet adapter is made of a high temperature resin to easy withstand the heat generated by the optional internal electric heating element. The manual heater-overload safety switch is easily accessible without disassembling the unit.

advantages

• Rust-free composite drain pan• Drain pan features anti-slosh, ‘positive-flow’ drain channels for no spills and rapid removal of condensate;• Single adjustment screw for 270° of blower rotation;• Blower can be rotated to straight down position for overhead applications;• Vibration isolation mounts reduce noise and vibration;• Flexible mounting options;• Optional flow control automatically balances circulated water throughout the system.• Optional electric heater• Optional EU package upgrades includes several upgrades for reduced installation time and improved appearance (contact us for more details)• Optional air purifier (microparticle air filter)

Dimensions

1 Model numbers shown are for 115V units with high velocity blowers. Add a ‘Z’ for 23V units; add a ‘FC’ for optional control; add a ‘-L’ or ‘-R’ for valve position (relative to the coil) and angle of the blower; add a ‘_kW’ for amount of optional electric heat in kW (for ex. 1.5kW)2 All dimensions ±0.3 inch (8mm).


Model (1) AU6 HV AU9 HV AU12HV AU18HV AU24HV

Capacity (kW) 1.76 2.64 3.52 5.27 7.03

V @ 50/60Hz / 1-Phase 230 115 230 115 230 115 230 115 230 115

Amps (FLA) Cool 00.83 1.56 0.61 1.14 0.78 1.61 2.52 1.18 1.64 3.4

Amps (FLA) Blower 5.18 10.26 4.96 9.84 7.3 14.65 28.61 14.22 14.68 29.49

Optional heater (kW) 1 1.5 1.5 3 3

Max. Circuit breaker (A) 10 15 10 15 10 20 30 15 20 35

Min. Circuit breaker (A) 6 11 6 11 8 16 30 15 16 31


Air flow (CFM / m3/h) 229 / 390 278 / 473 338 / 575 465 / 791 506 / 860

External static pressure (H20 / Pa) 0.3 / 75 0.3 / 75 0.3 / 75 0.3 / 75 0.3 / 75

Chilled water pressure drop (PS) 1.1 4.4 8 4.6 11

Min. Height (in / mm) (2) 11.19 / 285 13.31 / 339 13.31 / 339 13.94 / 355 15.25 / 388

Max. Height (in / mm) (2) 12.13 / 309 13.31 / 339 13.38 / 340 15.38 / 391 16.75 / 426

Max. Width (in / mm) (2) 14.5 / 369 16.5 / 420 16.5 / 420 20.13 / 512 22.63 / 575

Max. Depth (in / mm) (2) 12.65 / 320 13.25 / 337 14.25 / 362 15 / 381 15.38 / 391

Drain connection size (in) ½” ½” ½” ½” ½”

Minimum supply duct size (in/mm) 5 / 127 6 / 153 6 / 153 7 / 178 8 / 204


Minimum return air inlet (in2 / cm2) 70 / 452 98 / 633 130 / 839 200 / 1291 240 / 1549


FC marine fan coil unit

• Nominal cooling loads: 10 kW - 70 kW • Spigoted duct connection• Electro-coated mild-steel casing with powder-coated paint finish• Removable front panels for access and maintenance• Quick-release grille for air filter cleaning and replacement• Electrical supply o 380V 3ph 50Hz o 440V 3ph 60Hz• Available options o Plenum and Grille discharge o Color to suit operating environment o Alternative fan pressures o Electric or hot-water heating o Fresh-air connection o Stainless-steel casing

FC10 FC15 FC20 FC30 FC40 FC50 FC70

Nominal cooling load (kW) 10 15 20 30 40 50 70

Nominal air flow (m3/h) 1600 2600 3600 4800 6300 8000 11250

Nominal water flow (m3/h) 0.4 0.6 0.79 1.19 1.59 1.98 2.78

Fan motor rating 0.37 0.55 0.75 1.10 1.50 1.50 2.20

Dimensions H (mm) 1500 1750 1750 1750 1750 2000 2000

W (mm) 500 700 700 700 1200 1200 1500

D (mm) 500 750 750 750 750 750 750

P (mm) 260 270 330 340 340 400 450

Weight (kg) 121 168 185 221 278 303 372

Electric heating (optional) (kW) 1 x 4.5 2 x 4.5 2 x 6.0 2 x 9.0 2 x 9.0 3 x 9.0 4 x 9.0

www.heinenhopman.com

Heinen & Hopman encourages a more

sustainable world. By providing eco-friendly solutions and serviceswe offer our clients

the option of reducing energy consumption

and thus co2 emissions. Visit

greenmanifest.info for more information.

BrazilT: +55 213 587 4241/4244E: [email protected]

France - la CiotatT: +33 4 4204 8685E: [email protected]

France - antibesT: +33 6 3090 7786 E: [email protected]

GermanyT:+49 4073 1680E: [email protected]

GermanyT:+49 471 9869 300E: [email protected]

indiaT: +91 336 499 1293E: [email protected]

italyT: +39 018 745 7970E: [email protected]

The netherlands (HQ)T: +31 33 299 2500E: [email protected]

The netherlands (Rotterdam)T: +31 78 890 8050E: [email protected]

norwayT: +47 6919 0900E: [email protected]

People’s Republic of ChinaT: +86 213 253 2896E: [email protected]

People’s Republic of ChinaT: +86 510 8528 1763E: [email protected]

PolandT: +48 914 331 800E: [email protected]

RomaniaT: +40 236 448 222E: [email protected]

RussiaT: +7 (4012) 308 801E: [email protected]

singaporeT: +65 6897 7879E: [email protected]

south KoreaT: +82 704 901 0000E: [email protected]

spainT: +34 932 259 668E: [email protected]

swedenT: +46 3121 7500E: [email protected]

TurkeyT: +90 216 493 8118E: [email protected]

uaE (abu Dhabi) T:+971 2550 4147E: [email protected]

uaE (Dubai)T: +971 4263 5453E: [email protected]

usa - Fort lauderdale, FloridaT: +1 954 463 0110E: [email protected]

usa - Houma, louisiana T: +1 985 876 7982E: [email protected]

Documents

Fan Coil Units - Heinen & Hopman...siGMa fan coil units • Fan coil unit with casing • Heating and cooling applications • Capacity: 0.6 kW - 11.7 kW SIGMA fan coils units can