Extended distance solutionsenabling data, voice and videotraffic over a common, high-bandwidth optical network

ETHERNETAGGREGATION

ADVA OPTICAL NETWORKING AND FORCE10 NETWORKS – RELIABLE, HIGH PERFORMANCE AND SCALABLE ETHERNET/OPTICAL SOLUTIONS

Solution BenefitsThe combination of Force10 Networks routing and switching platforms and ADVA OpticalNetworking’s C/DWDM solutions allows enterprises and service providers to deploy and provision new high bandwidth applications and services quickly and at very low cost.

Force10 Networks E-Series switch/router and ADVA's FSP(Fiber Service Platform) series of C/DWDM combineunmatched scalability with best-of-class resiliency to bringthe network and application reliability required to maximizenetwork performance. Both solutions are based on fully distributed hardware and modular software to deliver line-rate Gbit/s and 10 Gbit/s throughputacross all ports regardless of traffic type or condition, while built-in redundancy guarantees performance continuity. Together, ADVA and Force10 deliver a complete high-performance optical networking solution required to support bandwidth-intensive applications like Grid/clustercomputing, Internet access and storage area networking/business continuance.

All of the features delivered by Force10 E-Series switch/routers can be extended and multiplexedup to 256 times transparently over ADVA’s C/DWDM platforms. Using systems like the FSP 3000and FSP 2000, customers can transport and aggregate the full suite of IP services, together withadditional protocols such as SONET/SDH, Fiber Channel, ESCON, and ATM.

• Future proof and scalable up to 64 DWDM channels to increase virtual fiber infrastructure

• Support of all common enterprise applications from 8Mbit/s to 10Gbit/s for higher flexibility in service provisioning

• Ease of installation, operation and management

Scalable from10Mbit/s to 100Gbit/sleveraging Terabitcapacity systems

• Pay as you grow without forklift upgrades

Extendthe distancefor all applications

• Best-of-breed technology for Metro & regional networking

Simplifynetwork topologies

& lowerTCO

• Aggregate IP and SAN traffic over common infrastructure

Scalable Enterprise Solution

© 2007 Force10 Networks, Inc. All rights reserved. Force10 Networks and E-Series areregistered trademarks, and Force10, the Force10 logo, Force10 Reliable Networking, C-Series, P-Series, S-Series, EtherScale, TeraScale, FTOS, SFTOS, StarSupport andHot Lock are trademarks of Force10 Networks, Inc. All other company names are trade-marks of their respective holders. Information in this document is subject to changewithout notice. Certain features may not yet be generally available. Force10 Networks,Inc. assumes no responsibility for any errors that may appear in this document.

HS07 707 v1.6

Force10 Networks, Inc.350 Holger WaySan Jose, CA 95134 USAwww.force10networks.com

408-571-3500 PHONE

408-571-3550 FACSIMILE

ADVA OPTICAL NETWORKING & FORCE10 NETWORKS — RELIABLE, HIGH PERFORMANCE AND SCALABLE ETHERNET/OPTICAL SOLUTIONS

ADVA FSP 2000Transport technologyDWDM, CWDM, TDMWavelengths per fiber pair1-64Applications per fiber pair1-512 (depending on TDM density)TopologyPoint-to-point, linear add/drop and ringOptical protectionLine protection Card protectionClient layer protection with dual homingLink distanceup to 100 km/62 miles unamplifiedup to 200 km/125 miles amplifiedApplicationsFDDI ATMFast Ethernet Gigabit Ethernet10 Gigabit Ethernet ESCON1 Gigabit Fibre Channel 2 Gigabit Fibre Channel10 Gigabit Fibre Channel 1 Gigabit FICON2 Gigabit FICON InfinibandETR / CLO 1 Gigabit Coupling Link2 Gigabit Coupling Link OC-3/12/48/192STM-1/4/16/64OpticsLocal port:850/1310 nm (SFP)Remote port: C/L-band DWDM: acc.to ITU-T G.694.1

CWDM: acc.to ITU-T G.694.2 (SFP)OSC: 1310/1510/1630 nm

All common connector types supportedOptional single fiber workingLaser class 1

Clock optionsSelectable: 125/155/200/622/1062/1250/2125/2488/

2500/9953/10312/10.5189Mbit/sAdaptive:100 ... 2500Mbit/sModulesWDM Channel Modules (WCM)TDM Channel Modules (TCM)DWDM Multiplexer/Demultiplexer (MDXM)CWDM Multiplexer/Demultiplexer(CMDXM)Band Splitter Modules (BSM)Remote Switch Modules (RSM)Optical Supervisory Channel Modules(OSCM)Optical amplifiers (EDFA)Dispersion Compensation Module (DCM)Network Element Management Interface (NEMI)Device Element Management Interface (DEMI)ManagementOptical Supervisory Channel (OSC)SNMP agentFSP Element and Network ManagerFSP Network PlannerAgency complianceCE, FCC, TÜV GS, UL, CULPowerVoltage 90-132/180-264VAC, autoranging -60VDC to -38VDCPower consumption max. 150 WEnvironmentalTemperature +5 to +45°CRelative humidity 10% to 90%non-condensingPhysicalWeight 33 pounds/15 kg per base unit fully loadedDimensions: 19 w x 12 d x 8.8" h(ETSI sized version available) 482 x 305 x 223 mm

Force10 E-SeriesSwitch/Router Family

ADVA FSP 2000 C/DWDM

Force10 E-SeriesE1200 14 line card slotsSize: 36.75 h x 17.4 w x 24" d (93.3 x 44.2 x 61 cm)

E600 7 line card slotsSize: 28 h x 17.4 w x 24" d (71.1 x 44.2 x 61 cm)

E300 6 line card slotsSize: 14 h x 17.4 w x 24" d (35.6 x 44.2 x 61 cm)

Common SpecificationsPhysical19" front, 19" middle (optional) & 23" middle

(E1200/E600 only) rack mountableMaximum Operating Specifications:

Temperature: 32° to 104°F (0° to 40°C)Altitude: no performance degradation to 10,000 feet

(3,048 meters)Relative humidity: 5 to 85 percent, noncondensingShock: Bellcore GR-63Vibration: Bellcore GR-63

Maximum Non-operating Specifications:Temperature: -40° to 158°F (-40° to 70°C)Maximum altitude: 15,000 feet (4,572 meters)Relative humidity: 5 to 95 percent, noncondensingVibration: Bellcore GR-63

E1200/E600 Redundancy/Availability1+1 redundant Route Processor Modules (RPM)N:1 (E1200 8:1, E600 4:1) redundant Switch Fabric

Modules (SFM)1+1 redundant DC Power Entry Modules (PEM)3+1 redundant AC power supplies (E600 only)Online insertion and removal of all componentsBuilt-in cable managementEnvironmental self-monitoring

E300 Redundancy/Availability1+1 redundant Route Processor Modules (RPM)1:1 redundant Switch Fabric Modules1+1 redundant DC Power Entry Modules (PEM)2+2 redundant AC power supplies

(E300 high line operation only)3+1 redundant AC power supplies

(low line and high line operation)Online insertion and removal of all componentsBuilt-in cable managementEnvironmental self-monitoringIEEE Compliance802.1AB Link Layer Discovery Protocol802.1ac Frame Extensions for VLAN Tagging802.1D Bridging802.1p L2 Prioritization802.1Q VLAN Tagging, Double VLAN Tagging802.1s Multiple Spanning Tree Protocol802.1w Rapid Spanning Tree Protocol802.1X Network Access Control802.3 10Base-T802.3ab 1000Base-T802.3ad Link Aggregation with LACP802.3ae 10 Gigabit Ethernet802.3ak 10 Gigabit Ethernet CX4802.3u Fast Ethernet (100Base-TX)802.3x Flow Control802.3z Gigabit Ethernet (1000Base-X)Designed for NEBSOn board thermal and voltage monitoringGR-63-Core: NEBS, physical protectionGR-1089-Core: EMC and Electrical Safety for

Network Telecommunications EquipmentSR-3580 NEBS criteria levels (Level 3 compliance)