EQUIPMENT RENTALCLEVELAND: (800) 362-9267CANTON: (877) 258-7601TOLEDO: (800) 860-3352www.chasephipps.com

C A T A L O G

Phipps helps contractors put work in place correctly and profitably by renting, selling, and

servicing specialized equipment for concrete placing, finishing, or surface preparation, as

well as pumps used to apply construction sealants and coatings.

Innovative Construction Product Solutions Since 1921.

• Quality Products

• Technical Expertise

• Trusted Service

FLOOR PREP EQUIPMENT

CONCRETE RELATED EQUIPMENT

CUTTING EQUIPMENT

PUMPS/SPRAYERS

BLASTING EQUIPMENT

AIR & CLIMATE CONTROL

Floor Prep Equipment National 5700 Battery Floor Stripper .................... 4

National 7600 Propane Floor Stripper ................. 4

National 5625 Propane Floor Stripper ................. 4

National 6280 Self Propelled Scraper .................. 4

National 550 Floor Stripper ..................................... 5

9” Shot Blaster .............................................................. 5

Blastpro BP10 Super .................................................. 5

Blastrac 10” Riding Shotblaster ............................. 5

Husqvarna PG280 Grinder ....................................... 6

Generac 17KW Generator ........................................ 6

Husqvarna 450 Grinder ............................................. 6

Husqvarna 820 Grinder ............................................. 6

MK Scarifier (Gas) SG-9 ........................................... 7

Bartell (Electric) Scarifier SP8-E ............................ 7

24” Propane Powered Burnisher #14420 ........... 7

Long Reach Pneumatic Chisel................................ 7

Larue Hepa Pulse Vacuum PB 1050 ..................... 8

Husqvarna 5500 VAC ................................................. 8

Husqvarna Diamond Grinding Segments .......... 8

Metabo 4” & 7” Grinder w/Shroud ....................... 9

Metabo Handheld Wet Polisher ............................. 9

Pneumatic Needle Scaler ......................................... 9

Bolt 20” Floor Buffer/Scrubber............................... 9

Concrete Related EquipmentAllen HDX 600 8’ Riding Trowel...........................10

Allen MSP 470 8’ Riding Trowel ...........................10

Allen Pro 436 Edging Trowel .................................10

Allen Pro 446 Walk Behind Trowel ......................10

Bartell TS78 6’ Riding Trowel ................................10

MQ 10’ Hydrostatic Riding Trowel ......................10

MQ 24” Walk Behind Edging Trowel ..................11

Allen 16cuft Concrete Buggy ................................11

Whiteman 9cuft Mortar Mixer ..............................11

Canycom SC75 Pivot Dump Buggy ....................11

Power Pusher Electric Wheel Barrow ................11

Collomix LevMix Mixer ............................................12

Allen 10’/14’ Magic Screed ...................................12

Mix-N-Go Concrete Mixer .....................................12

Wacker Electric Breaker .........................................12

Wacker Rotary Demo Hammer Drill ...................13

Allen Roller Tube Finisher ......................................13

Wyco Backpack Vibrator ........................................13

Wyco Handheld Vibrator ........................................13

Bartell BR1570 Reversible Plate Compactor ...13

Bartell BR3570 Reversible Plate Compactor ...13

Cutting EquipmentHusqvarna FS3500 G Saw ......................................14

Husqvarna FS524 Saw .............................................14

Soff-Cut 2000 Saw ....................................................14

Soff-Cut 4000 Saw ....................................................14

Soff-Cut Prowler 150 Saw ......................................14

Husqvarna Cut-N-Break Saw ...............................15

Husqvarna K760 Saw ...............................................15

Husqvarna K3000 Electric Saw ............................15

Husqvarna Ring Saw ................................................15

7”- 9” Spider Walk Behind Concrete Saw ........15

Gorilla 4.5” Dustless Crack Chaser .....................15

Stand-Up Joint Clean-Out Saw ...........................15

Pumps/SprayersQuikSpray Carrousel Pump ...................................16

Chemgrout Hand Grout Pump .............................16

Kenrich Air Operated Pump ..................................16

Dual Component Polyurea Pump ........................16

Graco RTX 1500 Sprayer ........................................16

Graco F340 Pump/Sprayer ....................................16

32” Concrete Cleaner ...............................................16

Seal-Boss 2:1 Injection Pump ...............................17

Graco 7900 Sprayer ..................................................17

Graco 833 Big Rig Sprayer ....................................17

MQ 2” Trash Pump ....................................................17

4000 PSI Pressure Washer .....................................17

Bartell S201 Power Sprayer ...................................17

Blasting EquipmentGraco Eco-Quip 600S ..............................................18

Graco Eco-Quip 100M .............................................18

Air & Climate ControlQuest PowerHeat 300 .............................................19

Quest PowerHeat HFC 100 Exchanger .............19

Quest PowerHEPA 1400 Pro .................................19

Quest PowerHEPA 500 ............................................19

Quest PowerDry 4000 Pro ......................................19

Quest Power Air Mover A3000 Plus ...................19

Miscellaneous ItemsArbortech Brick and Mortar Saw ........................20

Husqvarna Hand Held Core Drill .........................20

Fein MultiMaster Tool ..............................................20

Powers C-5 Track-It Gas Tool ................................20

Spectra HV101 Laser Kit .........................................20

Giraffe Insulated Form Bracing ............................20

Husqvarna HI Series Diamond Blade ................21

Husqvarna GH Series Diamond Blade ..............21

Husqvarna VH Series Diamond Blade...............21

Husqvarna FR3 Fire Rescue Blade .....................21

Husqvarna Professional F600C Series ...............21

Husqvarna Diamond Cup Wheels .......................21

Allen Finish, Combo, Clip-On Blades.................21

Allen Steel Pans .........................................................21

Soff Cut Early Entry Blades ....................................21

Cleveland: (800) 362-9267

Canton: (877) 258-7601 • Toledo: (800) 860-3352

www.chasephipps.com

4

National 5700 Battery Floor Stripper$685/Day $2055/Week $6165/MonthThe All Day Battery Ride-On removal and floor preparation machine - this machine has the ability to operate through an average eight hour day without requiring a battery recharge, or electrical cord assistance.

National 5625 Propane Floor Stripper$685/Day $2055/Week $6165/MonthThe 5625 boasts a 25 hp water cooled Kawasaki engine with the lowest emissions output in the industry. Its unique design allows the 5625 to plow through material without hesitation.

National 7600 Propane Floor Stripper$785/Day $2355/Week $7,065/MonthThe propane powered 7600 omits the lowest emissions in its class while designed to achieve massive removal rates. Easy to transport, fits in a standard door frame and accessible to most passenger and freight elevators, the 7600 can go places the others can not.

National 6280 Self Propelled Scraper$230/Day $690/Week $2070/MonthThis self-propelled stripper will remove the worst of today’s glued-down floors, gummy commercial carpet, VCT, solid vinyl, radial rubber tile, sheet rubber, indoor and outdoor sport surfaces, roofing material, etc.

SpecificationsWidth* 24-1/2”Height 50-1/2”Length* 58-1/2”Weight 2244 lbRemovable Weight 185 lb frontWeight (machine only) 2059 lbSpeed up to 120 ft/minVoltage 115/230Frequency 60 Hz/ 50 HzHP 4* Note: These measurements are without tooling attached.

SpecificationsWidth* 26”Height 52-1/4”Length* 63”Weight** 1822 lbRemovable Weight 370 lb front/ 75 lb rearWeight (machine only)** 1377 lbSpeed up to 200 ft/minHP 25* Note: These measurements are without tooling attached.

SpecificationsWidth* 30”Height 61”Length* 63”Weight** 2887Removable Weight 1003 lb front, 75 lb rearWeight (machine only)** 1809Speed up to 200 ft/minHP 25* Note: These measurements are without tooling attached.

SpecificationsWidth 17-3/4”Max. Height 46”Min. Height (handle folded) 30”Max. Length (handle extended) 51”Min. Length (handle folded) 29”Weight 425 lbRemovable Weight 47 lb front / 43 lb sideWeight (machine only) 335 lbSpeed 10-45 ft/minRPM 3450/2850Voltage 115/230Frequency 60 Hz/ 50 HzHP 1.5Amps 20* Note: These measurements are without tooling attached.

FLOOR PREP EQUIPMENT

5

National 550 Floor Stripper$105/Day $315/Week $945/MonthPerfect for residential and light commercial use, the 550 has removal capability of some it’s larger more expensive competitors.

9” Shot Blaster$270/Day $810/Week $2430/MonthThe 9” Shotblaster is a 120 volt, highly portable, lightweight shot blasting system used to prepare concrete surfaces prior to the application of paint or coatings. Perfect for smaller jobs or tight areas. Comes with VAC and magnetic sweeper. Specifications

Width 17-3/4”Max. Height with handle 42-1/2” Height without handle 21”Max. Length 32-1/2”Weight 123 lbRemovable Weight 44 lbWeight (machine only) 79 lbSpeed ManualRPM 1725Voltage 115/230Frequency 60 Hz/ 50HzHP 1Amps 15

BlastPro 10” Riding Shotblaster$985/Day $2955/Week $8865/MonthThe BP-10-27 ride on self-contained shot blasting system is the perfect solution for medium to large jobs and eliminates the need of a generator or electric power.

SpecificationsProduction Capacity 1,500 sq. ft. /hr.Blast Pattern 10”Travel Speed 0-200 ft. /min.Blast Motor 27 HP Kohler.Fuel PropaneDimensions 78”x34”x57”Weight 1,525 lbs.

SpecificationsWidth 12”Blasting Width 8”Max. Height 41-1/2”Min. Height 32”Max. Length 43”Min. Length 36-1/2”Weight 116 lbSpeed ManualBlasting Capacity up to 400 sq.ft./hrVoltage 115HP 1.5Current Recommend using a 20 amp

circuit breaker

Blastpro BP10 Super$825/Day $2475/Week $7425/MonthThe BP-10 Super is designed for medium to large jobs. The BP-10 is an electric self-propelled walk-behind machine. It is equipped with a 10”blast pattern. The BP-10 Super can operate on 208/230/460 volt three phase power. Comes with BP-9-54 VAC.

SpecificationsProduction Capacity 1,550 sq. ft. /hr.Blast Pattern 10”Travel Speed 0-100 ft. /min.Blast Motor 15 h.p.Voltage 203/230/460 3phaseAmperage 34 amps @ 230v / 17 amps @ 480vMinimum Generator 40 kwDimensions 63”x17”x40”Weight 736 lbs.Power Cord Length 55 ft.Seals Magnetic / wrap around sealDistance to edge 2.5”Dust Collector BP-9-54

FLOOR PREP EQUIPMENTCleveland: (800) 362-9267

Canton: (877) 258-7601 • Toledo: (800) 860-3352

www.chasephipps.com

Husqvarna PG280 Grinder$225/Day $675/Week $2025/Month11” Floor grinder for surface preparation and grinding of adhesive residue, paint and spackle on medium-sized concrete areas. 25’ of cord. Comes with 1-set of Prep Diamonds & PCD Blades.

Husqvarna 450 Grinder$305/Day $915/Week $2745/MonthPG 450 is a versatile and user-friendly planetary floor grinder. Perfect for a wide range of applications, e.g. coating removal, concrete grinding and concrete polishing. 25’ of cord. Comes with 1-set of Prep Diamonds & PCD Blades.

Generac 17KW Generator$95/Day $285/Week $855/MonthThe most powerful portable generator on the market and can provide power for up to 16 circuits.

SpecificationsGrinding disc 11 “Grinding pressure total 90.4 lbs

DimensionsWeight 54.3 lbsVoltage 115VAmps 20

SpecificationsGrinding width 17.7 “Grinding disc 7.1 “Grinding pressure total 152.1 lbsWeight 240.3 lbsVoltage 115VAmps 20

SpecificationsAC Rated Output Running Watts:17500AC Maximum Output Motor Starting Watts: 26250AC Voltage 120/240 VACAC Frequency 60 HzRated VAC Amperage 145.8 /72.9Max Rated VAC Amperage 218.75/109.38Engine Displacement 992cc

Husqvarna 820 Grinder$515/Day $1545/Week $4635/MonthWith 32 in. wide grinding width PG 820 is our most productive concrete floor grinder suitable for industrial applications. PG 820 is one of the market’s most powerful and efficient machines. Excellent choice for concrete floor preparation and repair as well as all polishing and grinding applications – both wet and dry. Comes with 1-set of Prep Diamonds & PCD Blades.

SpecificationsPower output 17 hpRated current, A 32 AVoltage 380 / 480 VGrinding width 32 “Grinding disc 10.5 “Grinding pressure total 737 lbs

FLOOR PREP EQUIPMENT

6

MK Scarifier (Gas) SG-9$285/Day $855/Week $2565/MonthMK Scarifiers have been designed to leave a clean, textured or rough finish on any type of concrete or asphalt surface. The unique engage/disengage lever allows the operator to raise and lower the drum without losing the depth setting.

Long Reach Pneumatic Chisel$60/Day $180/Week $540/MonthDesigned for a wide variety of surface preparation projects. Work fast and easy for removing vinyl and ceramic tiles, carpet adhesives and material build-ups from floors and walls. 7 CFM min compressor. Bits included in rental.

SpecificationsEngine*/Motor Honda GX270 CycloneWeight (including drum) 200 lbs. (91 kg.)Drum Dimensions (Dia. x L) 6” x 8”Drum Weight 30 lbs. (14 kg.)LxWxH (inches) 23” x 20” x 43”LxWxH (mm) 813 x 508 x 1,092

SpecificationsPiston Bore: .87 inch (32 mm)Piston Stroke: 1.97 inch (50 mm)Rated Air Pressure: 90 PSIOperating Air Pressure Range: 60 to 90 PSI (400-600 kPa)Rated Air Consumption: 10 CFM (5.0 lit/ sec.)Connecting Hose Configuration: 3/8 inch (9.5 mm) diameter, 60 inch (1524 mm) nominal lengthBarrel Construction: SteelAccessory Connection Type: .580 inch Hexagon

Bartell (Electric) Scarifier SP8-E$285/Day $855/Week $2565/MonthFor any surface, for any coating, the SP8 performs with great versatility. It offers high speed, accurate surface preparation at an economical price.

SpecificationsModel SP8-E Engine Various 3hp Motors Standard Cutting Width <8” (203 mm) Depth (per pass) <1/16” (1.6 mm) Weight 150lbs (68kg)Voltage 220V

24” Propane Powered Burnisher #14420$150/Day $450/Week $1350/MonthA propane powered, ultra-high speed burnisher that gives floorcare professionals the options they want to customize a machineto their needs.

SpecificationsWidth 29”Height 39”Length 50”Empty Weight 220 lbWeight 250 lb

FLOOR PREP EQUIPMENT

7

Cleveland: (800) 362-9267

Canton: (877) 258-7601 • Toledo: (800) 860-3352

www.chasephipps.com

Larue Hepa Pulse Vacuum PB 1050$70/Day $210/Week $630/MonthThe Larue Vac can be used for the general cleanup, vacuuming hard surfaces or carpets, but is designed to collect, capture and control dust. Dry particulate only.

Husqvarna 5500 VACPricing: $195/Day $585/Week $1755/MonthThe Husqvarna DC 5500 has exceptional performance and industrial strength to meet even the most demanding industrial application where high suction and flow are required to eliminate airborne dust. This highly mobile and versatile unit can be used for both wet and dry applications coupled with the Husqvarna PG 820 or PG 680.Specifications

Air Watts 450 Sealed Lift 87 Decibel Level 86db Voltage 110v/220v Current (Amps) 12.1 (peak draw) Weight 79 lbs. Inlet 2” Steel Tank 20 gallon

SpecificationsPower output 5.5 kW / 7.4 hpRated current, A 32 AVoltage 380 - 480 VPhases 3Air Flow 580 m³/h / 350 cfmMax. vacuum 0.3 bar / 4.35 psiSuction inlet diameter 75 mmPrimary filtration surface area 2.25 m² / 25 square ftMicro filter surface area 6.6 m² / 71.5 square ft

FLOOR PREP EQUIPMENT

8

Husqvarna Diamond Grinding SegmentsWhatever level of finish you are looking for, we have tools developed for most materials – from the hardest concrete floor to the most porous for grinding and polishing of old and new concrete floors.

Metabo 4” & 7” Grinder w/Shroud$45/Day $135/Week $405/MonthMetabo 4”& 7” hand grinder with dust shroud. Perfect for small areas and edging. Comes with diamond cup wheel.

Metabo Handheld Wet Polisher$75/Day $225/Week $675/MonthPolisher for wet polishing of granite, marble and concrete.Adjustable, external water supply for exact metering.

Pneumatic Needle Scaler$60/Day $180/Week $540/Monthldeal for removing coatings, corrosion and other accumulated materi-als. Scaler will work on almost any surface, especially irregular surfaces that are otherwise hard to prepare.

Bolt 20” Floor Buffer/Scrubber$50/Day $150/Week $450/MonthOur Bolt dual-speed floor machines are high quality, durable machines offering power and versatility for scrubbing and stripping. It features an adjustable handle height to accommodate various user heights. Five inch non-marking wheels allow for easy transportation.

FLOOR PREP EQUIPMENT

9

Cleveland: (800) 362-9267

Canton: (877) 258-7601 • Toledo: (800) 860-3352

www.chasephipps.com

Proper surface prep is an extremely important step in the application of new floor coatings, liquid, tile or other-wise. All Industrial coating manufactures specifically call out for detailed surface prep in their specifications for their coating systems. The International Concrete Repair Institute (ICRI) has created a Concrete Surface Profile (CSP) chart for all manufactures and contractors to follow.

Diamond Grinding ICRI Profiles: 2 & 3Diamond Grinding can produce a ICRI CSP of between 2 & 3. A number 2 is normally produced via grinding with diamond tooling of 30 grit.

Shot BlastingICRI Profiles: 3 - 7Shot blasting is capable of producing ICRI CSP profiles of between 3 - 7 typically.

ScarificationICRI Profiles: 5 - 9Scarifiers are capable of producing ICRI CSP Profiles between 5 - 9

ICRI Surface Profile Guideline

SpecificationsMotor 1.75 HP, 115V 175/300 RPM – Dual Speed Pad Speed 175/300 RPM Electrical System 115V, 60 Hz Switches Dual Levers with safety lockWheels Two 5” wheels with non-marking treadDimensions: (L x W x H) 24.5” X 21” X 47”

Allen Pro 436 Walk Behind Trowel$95/Day 285/Week $855/MonthEngineered for the concrete professional, our Allen Walkers are designed to produce high tolerance concrete floors (as measured by F-Numbers) with high quality features that are hard to find on other trowels.

SpecificationsEngine HONDA GX160Dimensions (L X H) 70” X 38”Rotor Diameter 36” - 4- BLADESMaximum Rotor Speed 118 RPM Weight 198 LBS

Allen Pro 446 Walk Behind Trowel$95/Day $285/Week $855/MonthEngineered for the concrete professional, our Allen Walkers are designed to produce high tolerance concrete floors (as measured by F-Numbers) with high quality features that are hard to find on other trowels.

SpecificationsEngine Honda™ GX270 (270 cc )Dimensions (L x H) 89 in x 39 inRotor Diameter 46 in 4-bladesMaximum Rotor Speed 180 RPMWeight 252 lbs Trowel Arms & Spider Standard Duty

Allen HDX 600 8’ Riding Trowel$475/Day $1425/Week $4275/MonthDesigned to satisfy the most demanding concrete contractors, the Allen HDX600, Hydraulic-Powered Riding Trowel is packed with the punch of a high-horsepower diesel engine and is the most powerful rider in its class and also one of the most dependable.

SpecificationsEngine 59 HP Turbo Charged Kubota DieselDimensions (L x W x H) 108 in. x 60.5 in. x 50.5 in.Panning Path Width 100 in. Rotors (Diameter) 46 in. 6-Bladed SpiderMaximum Rotor Speed 160 RPMWeight 1,613 lbs. Fuel Capacity 11 gal. (41.6 L)

Allen MSP 470 8’ Riding Trowel$395/Day $1185/Week $3555/MonthThe MSP470 features joystick power steering and the power and torque of the Kubota Diesel Turbo-charged engines, the Mechanical-Drive Super Pro (MSP) Series is the most popular rider with larger contractors.

SpecificationsEngine 44 HP Turbo Charged Kubota DieselDimensions (LxWxH) 101 in. x 50 in x 59 inPanning Width 95 InRotors (Diameter) 46 in 5- Blade SpiderWeight 1,450 lbs Fuel Capacity 6 Gal

CONCRETE RELATED EQUIPMENT

10

* Trowel blades purchased separately

Bartell TS78 6’ Riding Trowel$275/Day $825/Week $2475/MonthBartell ride-on power trowels have been engineered to meet the profes-sional contractor for a lightweight, high production machine with easy maintenance characteristics.

SpecificationsFuel Type GasolinePower Source Kohler CH740/CH730 Honda GX690Power Output 22hp Float Blade Size 10” x 14”Finish Trowel Size 6“ x 14”Combination Blade Size 8” x 14”Float Pan 36.5” (93cm)Operating Weight 620lbs Length 78” (198cm)Width 41” (104cm)

MQ 10’ Hydrostatic Riding Trowel$495/Day $1485/Week $4455/MonthPerfect for troweling along the edges of walls or around protruding pipe and conduit, the Edger features all the power and performance as our Professional Series.

SpecificationsEngine 55 Hp John Deere Turbo DieselDimensions 125” x 65” x 56” Weight 2230 lbsRotor RPM 0 - 130 Pan Width 117” Rotors 6 - blade rotors

Allen 16cuft Concrete Buggy$125/Day 375/Week $1125/MonthThe sixteen cubic foot AR16 has earned its rank as the standard by which all power buggies are judged. The massive two-inch thick solid steel tank-tough frames provide unparalleled strength and durability along with a lower center of gravity and ideal weight distribution.

SpecificationsEngine Honda™ GX390 (389 cc) Recoil or Electric StartPayload 500 lbs Dimensions (L x H) 97 in x 50 in Length (With Platform Up) 88.5 in Dimensions (Width) 47 in Wheelbase / Track Length 40 in Bucket Capacity 16 cu. ft. Weight 1300 lbs Dump/Return Speed Empty 5 SecondsTop Speed 7 mph Fuel Capacity 1.7 gal

CONCRETE RELATED EQUIPMENT

11

Whiteman 7cuft Mortar Mixer$95/Day $285/Week $855/MonthMixes up to 12 cubic feet (340 liters), 3-1/2 - 4 bags of material. Heavy duty safety grate with built-in bag cutter. Durable paddle shaft of 1-1/4” square hardened steel. Double sealed bearings with eight spring-loaded grease-able seals.

SpecificationsDrive System V-beltDrum Capacity 9 cu. ft, 254.9 L 2 1/2 - 3 1/2 bagsDump Type ManualDischarge Height 21 in, 530 mmDrum Type SteelDrum Thickness 10Engine Cover Thickness 14Tire Size B78x13Frame Type TubularPaint Type Powder coatPower Source Honda GX240KIHA2

Cleveland: (800) 362-9267

Canton: (877) 258-7601 • Toledo: (800) 860-3352

www.chasephipps.com

MQ 24” Walk Behind Edging Trowel$95/Day $285/Week $855/MonthThis compact design is ideal for finishing edges and around risers, has a powerful Honda GX 120 engine

SpecificationsEngine Honda GX 120 3.5 HPRotor Diameter 24” Rotor Speed 0-130 RPMWeight 170 lbs

Canycom SC75 Pivot Dump Buggy$200/Day $600/Week $1800/MonthThe all new Pivot Dump SC75 rubber track concrete buggy delivers maximum performance in any environment including wet or muddy conditions, rough, uneven terrain and loose sand and gravel. It can hold up to 16 cubic feet of material. A 22-hp engine enables the machine to reach speeds up to 6 mph. Features include hydrostatic drive; rubber tracks, a 90-degree dump angle and 180-degree pivoting dump.

SpecificationsLxWxH 95” x 35” x 57” Payload 1655 lbs – 16 CuftEngine 22hp Robin Speed 0-6 MPH

Power Pusher Electric Wheel Barrow$125/Day $375/Week $1125/MonthDesigned to transport heavy loads with ease and eliminate the ergonomic challenges and unnecessary production halts associated with traditional wheelbarrow solutions for improved operator productivity and safety.

SpecificationsLiquid Volume 5 Cubic FeetSolid Volume 9 Cubic FeetCapacity 750 lbsWidth 32”Height 38-1/2”Length 69”Speed 4 mphElectrical 24v DcCharger Location In Wheelbarrow

Collomix LevMix Mixer$75/Day $225/Week $675/MonthBlending of leveling compounds fast and easy with the new Collomix LevMix mobile mixer. The LevMix unites three steps in one operation: mixing, transporting and pouring out. Save time and mix up to three bags of mixing material at once.

Mix-N-Go Concrete Mixer$70/Day $210/Week $630/MonthMultiquip’s Mix-N-Go’s now come with the convenience of a thick polyethylene drum. Perfect for small footings, bases, patching. Use as a wheelbarrow or with a stand. Drum Capacity (Mixing) 3 Cuft.

SpecificationsMixing volume 15 gal. / 3 sacks Max. load 220 lbs Mixing bucket 17 gallons bucket - tall Power rating 1600 watts Speed 660 rpm (no load) 410 rpm (under load) Weight empty 93 lbs. Dimensions 27.2 x 20.5 x 46.9 inches

SpecificationsMax Drum Capacity (Mixing) 3 cu. ftDrum Type PolyPower Source 1.0 HP, 115V, 60 Hz single phase Electric Motor Overall Length 48.75 in 1238 mmOverall Width 23.5 in 597 mmOverall Height 56.1 in 1425 mmShipping Dimensions 48.5 x 26.63 x 56.1 in 1232 x 600 x 864 mmOperating Weight 138 lb 62.6 kgShipping Weight 138 lb 62.6 kg

Wacker Electric Breaker$105/Day $315/Week $945/MonthThe re-engineered EH 27 features a leaf spring damping system which protects the user’s entire body from vibration. This feature reduces fatigue and lengthens an operator’s work duration.

CONCRETE RELATED EQUIPMENT

12

Allen 10’/14’ Magic Screed$80/Day $240/Week $720/MonthPrecision engineered, lightweight wet screed for single operator fast strike-off of concrete.

Allen Roller Tube Finisher$250/Day $750/Week $2250/MonthStrikes off concrete fast and accurately. Perfect quick strike finisher for paving - especially for pervious concrete applications. Comes with choice of tube size - 6’, 8’, 14’, 16’, 18’ and 26’.

Wyco Backpack Vibrator$65/Day $195/Week $585/MonthThe Wyco backpack design provides for easy mobility around the jobsite and can allow one user to easily vibrate low to high slump concrete with up to a 2” head with ease.

Wyco Handheld Vibrator$60/Day $180/Week $540/MonthWyco Tool’s new energy efficient Sure Speed motor requires less power consumption by using only the energy necessary for job completion, pro-duces less noise, and maintains a longer life span than competing motors.

Wacker Rotary Demo Hammer Drill$85/Day $255/Week $765/MonthThe innovative drilling and chiseling hammers save moneybecause they lose no time due to maintenance and failures.

CONCRETE RELATED EQUIPMENT

13

Cleveland: (800) 362-9267

Canton: (877) 258-7601 • Toledo: (800) 860-3352

www.chasephipps.com

Bartell BR1570 Reversible Plate Compactor$75/Day $225/Week $675/MonthThe Bartell Vibratory Plate Compactor is the product of extensive engi-neering development designed to give long life and unmatched perfor-mance. Hydraulic reversing mechanism with flexible maneuverability allows the machine for forward, backward, and spot-on compaction.

SpecificationsPlate Size (WxL) in. 14”x19” Operating Weight lb. 188lb Travel Speed ft/min (m/min)- forward 0-82 (0-25)Travel Speed ft/min (m/min)- reverse 0-82 (0-25)Centrifugal Force lbf 3461

Bartell BR3570 Reversible Plate Compactor$98/Day $294/Week $882/MonthThe Bartell Vibratory Plate Compactor is the product of extensive engi-neering development designed to give long life and unmatched perfor-mance. Hydraulic reversing mechanism with flexible maneuverability allows the machine for forward, backward, and spot-on compaction.

SpecificationsPlate Size (WxL) in. 18”x28” Operating Weight lb. 551 lbsTravel Speed ft/min (m/min)- forward 0-82 (0-25)Travel Speed ft/min (m/min)- reverse 0-82 (0-25)Centrifugal Force lbf 7871

Soff-Cut Prowler 150 Saw$105/Day $315/Week $945/MonthThe Husqvarna Soff-Cut 150 saw is designed for residential and light commercial applications. The lightest gas saw in the Soff-Cut range, the 150 is designed for ease of use and convenience.

SpecificationsEngineMotor manufacturer SubaruMotor spec EX13Max output 3.2 kW / 4.3 hp(As rated by the engine manufacturer)Fuel tank volume 0.7 gal.Starter RecoilEngine cooling AirCutting EquipmentOutput RPM 3800 rpmDiamond blade, max 6 “Max cutting depth 1.18 inchBlade depth control ManualBlade control Manual

Husqvarna FS524 Saw$190/Day $570/Week $1710/MonthThis 24in. FS 524 walk-behind concrete saw features a patented IntelliSeal bladeshaft system that provides 250 maintenance-free hours and eliminates the need to grease bearings on a daily basis.

SpecificationsEngineMotor manufacturer HondaMax output 15.5 kW / 20.8 hp(As rated by the engine manufacturer)Cutting EquipmentDiamond blade, max 24 “Max cutting depth 9.7 inchDimensionsWeight 509.26 lbsProduct size, LxWxH 68.9x26x47.24 inch

Husqvarna FS3500 G Saw$275/Day $825/Week $2475/MonthThe Husqvarna FS3500 G features a well-balanced, low profile design. Ideal for repair and removal of driveways and sidewalks.

SpecificationsEngine Motor manufacturer Kohler Horsepower 37 RPM 1860 Cutting Equipment Diamond Blade 30” maxCutting Depth 12-3/8” Weight 970 lbs

Soff-Cut 4000 Saw$350/Day $1050/Week $3150/MonthThe Husqvarna Soff-Cut 4000 self-propelled gasoline saw is designed for heavy-duty commercial, industrial and paving applications. Features include a 20 hp twin-cylinder engine with overhead valves, heavy-duty air cleaner, electric start, full pressure lubrication, hydraulic valve lifters and a mechanical fuel pump. Three blade widths can be used, allowing different joint widths and crack control simultaneously.

SpecificationsEngine Motor manufacturer KohlerMax output 15.3 kW / 20.5 hpStarter ElectricEngine cooling AirCutting EquipmentDiamond blade, max 13.5 “Max cutting depth 2.75 inchBlade depth control ElectricBlade control Electric RemoteWeight 420 lb

Soff-Cut 2000 Saw$285/Day $855/Week $2565/MonthThe Husqvarna Soff-Cut 2500 self-propelled dry cutting gas saw has a low noise enclosed design and is ideal for medium to heavy-duty com-mercial, industrial and paving applications. in pipe trenches, grooves for cabling, expansion joints and crack repair.

SpecificationsEngineMotor manufacturer HondaMotor spec GX390Max output 11 hpFuel tank 1.6 gal.Starter ElectricCutting EquipmentOutput RPM 3200 rpmDiamond blade, max 10 “Max cutting depth 1.5 inchBlade depth control ElectricWeight 347 lbs

CUTTING EQUIPMENT

14

Stand-Up Joint Clean-Out Saw$125/Day $375/Week $1125/MonthThis US Saws SX13550 Dust Buggy Joint Cleanout Concrete Saw can be used directly with the Metabo W24-230 grinder to help you maintain a clean jobsite. The SX13550 can be used with a 7”or 8” blade to reach a maximum cutting depth of 2”.

Gorilla 4.5” Dustless Crack Chaser$95/Day $285/Week $855/MonthThis 4.5” dustless grinder will increase productivity and keep you off your knees. 2” vacuum port adapter. Rental includes 4.5” crack chasing blade. Weight 32 lbs.

7”- 9” Spider Walk Behind Concrete Saw$85/Day $255/Week $765/MonthConcrete saw designed through years of concrete experience and manufactured for endurance.

SpecificationsMotor Honda GX200 6.5 HPBlade size 7” - 9”Cutting Depth Up tp 2.5”Arbor size 5/8”Weight 104 lbsSwitches Dual Levers with safety lockWheels Two 5” wheels with non-marking treadDimensions: (L x W x H) 24.5” X 21” X 47”

Husqvarna Cut-N-Break Saw$98/Day $294/Week $882/Monthlf you are looking for the ideal concrete saw for window and door open-ings look no further than the Cut-n-Break. This tool has deep cutting of up to 16”. Perfect for cutting pipes in pipe trenches, grooves for cabling, expansion joints and crack repair.

SpecificationsEngineCylinder displacement 4.48 cu.inchPower output 5 hpVibration & Noise DataVibrations front handle 1.9 m/s²Vibrations rear handle 2.8 m/s²Sound pressure level at operators ear 101 dB(A)Sound power level, guaranteed (LWA) 115 dB(A)Cutting EquipmentBlade diameter 9 inchMax cutting depth 16 inchOverall DimensionsWeight (excl. cutting equipment) 21.2 lbsWeight (incl. cutting equipment) 24.5 lbs

Husqvarna K760 Saw$65/Day $195/Week $858/MonthThe Husqvarna K 760 has long been a highly popular all-round power cutter among construction workers and landscapers.

SpecificationsEngineCylinder displacement 4.48 cu.inchPower output 5 hpVibration & Noise DataVibrations front handle 2.4/2.4 m/s²Vibrations rear handle 2.4/2.4 m/s²Sound pressure level at operators ear 101 dB(A)Sound power level, guaranteed (LWA) 115 dB(A)Cutting EquipmentBlade diameter 12/14 “Max cutting depth 4/5 “Weight 21.2/21.6 lbs

Husqvarna Ring Saw$105/Day $315/Week $945/MonthWhen you need to make deep cuts fast our K 970 Ring is the answer. It has an exceptional cutting depth of 10”, twice the amount of a traditional power cutter.

SpecificationsCylinder displacement 5.71 cu.inchPower output 6.5 hpVibrations front handle 3.8 m/s²Vibrations rear handle 5.1 m/s² Blade diameter 14 inchMax cutting depth 10 inch

Husqvarna K3000 Electric Saw$90/Day $270/Week $810/MonthWet and dry cutting in one machine! Electric all-around wet cutter that minimizes the amount of water and slurry. With the optional Vac unit you can easily transform it into a dry cutter that generates minimal dust.

SpecificationsEngine Electric 120VVoltage 120 VoltRated current, A 15 AmpPower 1800 WBlade diameter 14 inchMax cutting depth 5 inch

CUTTING EQUIPMENT

15

Cleveland: (800) 362-9267

Canton: (877) 258-7601 • Toledo: (800) 860-3352

www.chasephipps.com

* Rental Includes 1 Diamond Blade.

Kenrich Air Operated Pump$80/Day $240/Week $720/MonthAir operated, easy to operate, minimal maintenance required. Pumps most types of cementitious grout (not for epoxy-type grouts).

QuikSpray Carrousel Pump$325/Day $975/Week $2925/MonthPump and spray a variety of commercial products - Epoxy, cement or plaster, with or without aggregate. Accessibility to most job applications. Pneumatic or electric power available. Phipps can provide recommended products to be pumped or sprayed for just about every application. We have a large data base of products that have been tested through the Quickspray pump.

Graco F340 Pump/Sprayer$340/Day $1020/Week $3060/MonthEngineered with piston pump technology, ToughTek Pumps deliver high pressures to move materials through long hose lengths. Graco’s piston pump technology easily handles low, medium and high-density materials, delivering them with a smooth, steady flow rate.

Graco RTX 1500 Sprayer$125/Day $375/Week $1125/MonthThe RTX 1500 is packed with innovative features and performance points – designed for the professional texture contractor. Electric air powered sprayer for cementitious sprayable products.

Chemgrout Hand Grout Pump$75/Day $225/Week $675/MonthThe most powerful hand pump in the industry, the 050M provides more than 200 psi. of injection pressure. The heavy-duty Model CG- 050M is an easy to use, skid mounted hand pump designed for small-er jobs using high viscosity slurries and most pre-packaged grouts.

32” Concrete Cleaner$45/Day $135/Week $405/MonthClean large surfaces faster and easier than with a standard cleaning nozzle. This cleaning accessory can be used on decks, patios, side-walks, driveways, pool decks, parking lotsand any other horizontal surface.

Dual Component Polyurea Pump$315/Day $945/Week $2835/MonthRugged and lightweight construction make this machine a prime choice. The powerful electric motor will keep up even with the fastest operator. For use with non-filled epoxy and polyurea with a 1:1 ratio

PUMPS/SPRAYERS

16

Seal-Boss 2:1 Injection Pump$80/Day $240/Week $720/MonthThis lightweight and powerful injection pump can be used for dual component epoxy and/or polyurethane injection resin with viscositiesbetween 10 and 1000 cps.

Graco 7900 Sprayer$105/Day $315/Week $945/MonthThe GMAX II 7900 sprayer is the most powerful sprayer for high production paint contractors doing large tract, commercial and new residential construction jobs where uninterrupted spraying is expected. Can Spray all paints, acrylics, polyester and cold tar 2.2 GPM 3300PSI.

Graco 833 Big Rig Sprayer$300/Day $900/Week $2700/MonthThe GH 833 is the preferred choice for high production professional contractors who spray a wide range of materials. Gas hydraulic unit that can spray it all including asphalt emulsions, waterproofing, elastomeric acrylics and mastics - 4.0 GPM, 4000 PSI.

PUMPS/SPRAYERS

17

Cleveland: (800) 362-9267

Canton: (877) 258-7601 • Toledo: (800) 860-3352

www.chasephipps.com

4000 PSI Pressure Washer Rental Rate: $70/Day $210/Week $630/MonthThe industrial-grade Honda GX390 389cc OHV engine features a cast iron sleeve, and a horizontal shaft design for up to five times longer life than vertical shaft engines. A premium-quality Cat direct drive axial pump with ceramic plungers and a forged brass manifold provide superior performance and durability.

SpecificationsWeight 191.0 lbsPressure (PSI) 4,000Flow (GPM) 3.5Engine HondaEngine Model GX390

MQ 2” Trash Pump$85/Day $255/Week $765/MonthThis Honda-powered trash pump boasts a host of standard features for superior performance across the board. One-man operation to use in various dewatering applications when you have debris in the water. (Rental includes 50’ suction and discharge hose)

SpecificationsSuction x Discharge 2 x 2 inMax. Water Capacity 211 gpmMax. Lift 25 ftMax. Head 98 ftMax. Pressure 42.4 psiMax. Solid Intake 1 in

Bartell S201 Power Sprayer$95/Day $285/Week $855/MonthSprays materials with a variable pressure between 40 and 120 psi while constantly agitating material. Easily handles form oils, pigmented curing compounds, bond breakers, soaps and detergents, pest control liquids, and most liquid type material. Handles pigmented material up to 40% solids.

SpecificationsEngine Honda GX120Power 5.5 HPWeight: 110 Lbs Hose length 50’ Pressure 40 – 120 PSI

BLASTING EQUIPMENT

18

Graco Eco-Quip 600S Rental Rate: $650/Day $1950/Week $5850/MonthBuilt to withstand the toughest working conditions, the EQ600s is a high-production standalone unit to tackle your largest, most demanding projects. Comes with 50’ of blast hose & 50’ of air hose.

Specifications:Maximum Working Pressure 125 psiOperating Temperature 35° – 110° FAir Compressor 375 – 600 cfmBlast Hose Size 1.25 in. IDAbrasive Capacity 400 – 500 lbDry Weight 1100 lbWater Tank Volume 115 gallon300–600 cfm compressor and less than 100 ft hose length 1.5 in.

Graco Eco-Quip 100M Rental Rate: $425/Day $1275/Week $3825/MonthWith its built-in hand truck, slide rails and convenient lifting eye, the patented EQ100m design is easy to move at the jobsite. The EQ100m can accommodate any abrasive heavier than water. Capable of handling any type of project, from cleaning to surface preparation. Comes with 50’ of blast hose & 50’ of air hose.

Specifications:Maximum Working Pressure 125 psiOperating Temperature 35° – 110° FAir Compressor 185 – 375 cfmBlast Hose Size 1 in. IDAbrasive Capacity 100 – 250 lbDry Weight 360 lbWater Tank Volume 10 gallon185–600 cfm compressorand less than 100 ft hose length 1.5 in. ID

About Vapor Abrasive Blasting

• Generates less dust - 92% less airborne dust than dry blasting• Optimizes air, water and media ratio – resulting in a fine mist with a blast that is powerful, but with less dust• Uses less water than traditional water-based wet blasting• Uses less media than wet blasting, so clean up is minimal and you save on media costs

50’ Blast Hose Extension $40/day $120/week $360/month

50’ Air Hose Extension $30/day $90/week $270/month

Crushed Glass Media $13.50 (50LB bag) for blasting concrete/masonry or when a light blast is required.

Garnet Blast Media $17.50 (55LB bag) for blasting steel or when an aggressive blast is required.

Quest Power Air Mover A3000 Plus$20/Day $60/Week $180/MonthThe Quest Power Air Mover A3000 Plus has changed the drying indus-try by minimizing overall drying time on restoration jobs. By maximizing the air velocity, water evaporates more quickly from the carpet, pad, sub-floor, wall, and sill plate.

BLASTING EQUIPMENT

19

Cleveland: (800) 362-9267

Canton: (877) 258-7601 • Toledo: (800) 860-3352

www.chasephipps.comAIR & CLIMATE CONTROL

Quest PowerHEPA 1400 Pro$75/Day $225/Week $675/MonthThe Quest PowerHEPA 1400 Pro is extremely versatile with its multiple ducting and filtration options. This provides the unique ability to con-tinually filter the indoor air and depressurize the jobsite to prevent the spread of contamination. 1400 CFM - 120 lbs.

Quest PowerDry 4000 Pro$85/Day $255/Week $765/MonthThe 4000 Pro is a larger capacity, stainless steel unit designed with the combination of high performance and portability. The multiple ducting options on the 4000 Pro allows for ducting both the intake and processed air, and easily combines this unit with a HEPA air scrubber.

Quest PowerHEPA 500$50/Day $150/Week $450/MonthOur HEPA air scrubbers are portable air scrubbing devices designed to capture virtually all removable airborne particles. The powerful PowerHEPA 500 (500 CFM) can perform one air change in a 16 x 16 x 8 foot room in less than 4 minutes.

*All Filters and Hoses Are Sold SeparatelyHEPA 500Hepa Filter 18” x 18” x 2.5” $99.00Pre-Filter - 18” x 18” x 1” $8.00Carbon Filter $54.00

HEPA 1400 Hepa Filter 24” x 24” 1” $284.00Pre-Filter 24” x 24” x 1” $3.25Pre-Filter 24” x 24” x 2” $9.50Carbon filter - 24” x 24” x 2” $82.00

PowerDry 40004000 Pro-Filter Merv 11 $9.504000 Pro-Filter Merv 8 $6.50

HoseFlex Duct - 12” x 25’ $65.00Lay Flat Duct - 10” x 250’ $42.00

Quest PowerHeat 300Rental Rate: $2,166/Week $6,500/Month Seasonal rates available.

Heat up to 440,000 cubic feet. Can operate up to 4 HFC 100 exchangers.Comes with: 2 - 1” x 50’ & 8 - 3/4” x 50’ Hoses and 1 - 4 port manifold.

The CSA/UL certified Quest PowerHeat CHH300 Pro Central Hydronic Heater is designed to operate on multiple fuel sources. The burner utilizes proprietary technology to ensure smooth, clean, cold-weather ignition and steady burn efficiency. Quest CHH300 Pros are tri-fuel and a burner change is all that is required to convert from one fuel type to the other. All exposed components on CHH300 Pros are made of non-corrosive stain-less steel and aluminum. Unlike competitive units, the Quest combustion chamber is 100% stainless steel, making it corrosion-free as well, even when running in low temp applications such as concrete curing.

CHH300 Pro system uses only 20 gallons of glycol. As a result, the unit will heat up faster, with less energy, and better utilize its powerful 308,000 BTUs. The 1HP stainless steel centrifugal pump is contaminant-free, keeping the glycol clean and safe to use on every job.

Quest PowerHeat HFC 100 ExchangerRental Rate: $136/Week $408/MonthThe Quest PowerHeat HFC 100 Pro hydronic fan coils for glycol heating systems provide the most efficient and versatile heat source for climate control applications. Quest PowerHeat hydronic fan coils, when coupled to any glycol central heat system, will deliver safe, dry, efficient, and even heat to any project.

The Quest PowerHeat HFC 100 Pro provides 100,000 BTU/hr and 950 CFM. Quest hydronic fan coils are engineered to be the most efficient, most rugged, and most portable hydronic fan coils made. In addition, Quest hydronic fan coils are thermostatically controlled, allowing the user to set the optimal temperature for each project.

Unlike direct-fired heaters, Quest hydronic fan coils completely isolate the heat source from combustion byproducts. This not only provides a safer heat source on the job site, but also eliminates the need for out-side air ventilation, saving money on fuel costs. The Quest PowerHeat HFC 100 will help provide the necessary air quality to meet stringent OSHA air quality standards and address health, safety and welfare issues for construction job sites.

Arbortech Brick and Mortar Saw$90/Day $270/Week $810/MonthThe AS170 Brick + Mortar Saw represents a revolution in cutting technology. Using a unique patented orbital cutting motion with two forward facing blades that combine to perform both a hammering and cutting action.

Spectra HV101 Laser Kit$70/Day $210/Week $630/MonthMultipurpose Construction Laser for Interior and Exterior Applications. Exceptional versatility allows it to handle a wide variety of horizontal, vertical and plumb applications. The HV101 laser transmitter is auto-matically self leveled in the horizontal and vertical planes and sends a continuous 360-degree laser reference over the entire work area. The HV101 laser is easy to set up and use and is rugged enough for thetoughest jobsite.

Giraffe Insulated Form BracingCall for Rental RatesGiraffe Insulated Concrete Form Bracing allows you to build walls 10’, 15’ and 20’ high.Giraffe Bracing is the highest quality bracing on the market.

Fein MultiMaster Tool$45/Day $135/Week $405/MonthFEIN SuperCut is the right power tool for all professionals in the interior and renovation trades. With a 400 Watt motor and stronger oscillation movement, the FEIN Supercut means maximum progress, resulting in time and cost savings.

Husqvarna Hand Held Core Drill$50/Day $150/Week $450/MonthThe Husqvarna Handheld Core Drill is a core drill for drilling up to 4in. diameter openings. The unit can be used for a variety of applications including making holes for ventilation, plumbing pipes, joints, electrical sockets and telecom cables.

Powers C-5 Trak-It Gas Tool$50/Day $150/Week $450/MonthThe new C5 gas powered tool is the only tool on the jobsite that can shoot .102, .120 and .145 diameter pins and delivers more power than the competition – 105 Joules! The battery shoots up to 3500 pins without recharging, the depth gauge enables the user to set depth of pin and can shoot deep track (2-1/2 inches).

MISCELLANEOUS

20

PLEASE CALL FOR PRICING

MISCELLANEOUS

1. Husqvarna HI Series Diamond BladeHI series is the only all-purpose blade with notched segments which grab and grind material.Available in 12”, 14” and 16”.

2. Husqvarna GH Series Diamond BladeGeneral purpose, abrasive material blade. GH5 is a general purpose blade for cured concrete, masonry & stone, GH9 is for fast cutting limestone aggregate and green concrete.

3. Husqvarna VH Series Diamond BladeGeneral purpose cutting of cured concrete and brick. Segment height .400”. Available in 12” and 14”.

4. Husqvarna FR3 Fire Rescue BladeFor metal, concrete, brick/block. Recommended when free cutting of any material is critical.

5. Husqvarna Professional F600C SeriesFor cured concrete cutting 20-72 HP. Narrow notch design, 24” or larger have recessed segment undercut protection. 21

Allen Finish Blades • Allen Combo BladesAllen Clip-On Float Blades Allen Engineering offers a complete line of finish blades, combination blades and clip-on float shoes for your walk-behind or ride-on power trowels. Allen uses high quality steel or composite plastic with high strength rivets to maximize blade life. For the flattest floors, trust only Allen Finishing Blades. Allen blades will fit most other brands of walkers and riders.

Allen Steel PansAllen Engineering pioneered the use of pans on riding trowels in 1989 and Allen Pans remain today the finishers choice when high Ff numbers are specified on a concrete floor.

Soff Cut Early Entry BladesSoff-Cut blades provide highly efficient, stable and convenient oper-ation in traprock, chert, quartz and limestone concrete. An anti-ravel skid plate comes with every blade. This allows for same-day sawingwithout chipping and spalling.

Husqvarna Diamond Cup WheelsSizes range from 4” to 7”. Available in single row, double row, turbo segments and arrow design segments. PCD’s for the removal of glue, epoxy and vinyl.

1. 2. 3. 4. 5.

Cleveland: (800) 362-9267

Canton: (877) 258-7601 • Toledo: (800) 860-3352

www.chasephipps.com

22

Chas. E. Phipps Logistics & Warehousing ServicePhipps is offering the use of our facilities to temporarily warehouse materials that you and any sub-contractors need

for jobs where space is a premium. With our forklifts and people, we will take delivery of materials and send the

contractor confirmation of what has arrived. We will store the materials (if needed in a heated warehouse) and either

deliver the material to the job or arrange for the contractor to pick-up when needed. Phipps would reserve the right

to screen all the materials intended for these services on the basis of safety, environmental concerns, and competitive

situations.

Phipps Strengths: We believe we can meet the objectives above based on the following:

• Product Knowledge: The Phipps warehouse staff has a sound understanding of our customers, products, and the

product handling requirements.

• Location: Phipps Cleveland, Canton and Toledo locations are strategically located and easily accessible.

• Warehouse: All 3 Phipps locations have plenty of heated warehouse space to temporarily handle customer’s material

and equipment.

• Operations/Logistics: Warehouse operations and Logistics are two areas of expertise we can deliver for contractors

and their projects.

Responsibilities: The Chas. E. Phipps Company assumes all liability relating to the products stored and handled in

our warehouse. This will include inspecting and accurately receiving material, storing material safely, and providing

customer will call or delivery of customer material as needed.

Inventory Handling Process:• Shipment Receiving (this process will be completed the day the shipment arrives):

• Customer sends email or fax notification of incoming shipment with product details.

You can also have Phipps arrange for the shipment of your materials to help save you time and money.

• Shipment arrives and is checked in by Phipps warehouse staff against the truck packing list/shipment notification

email/fax.

• Inventory is put away in the warehouse location assigned to customer, duplicate stock will be rotated if needed.

• The initial e-mail/fax notification of the incoming shipment will be replied to with any notes, adjustments, etc., to

confirm receipt of the shipment. We can also provide pictures of material if needed.

• Customer Outbound Shipments or Will Call: • Customer calls or emails with requested material list, including instructions on when the product is needed.

(24/hour notice is preferred)

• Warehouse staff will “pick” the customers material and have it staged for will call or delivery on Phipps truck or

customers preferred method of transportation. Use of Phipps trucks and/or Phipps logistics service will be priced

at the time of the customer’s request.

• A reply email or fax is sent along with the tracking number of the shipment to confirm the order has shipped.

Chas. E. Phipps Equipment ServiceJoe Harris heads up our Equipment & Service program. He brings to Phipps 30+ years of

experience in equipment service, sales and rental. Joe is a certified technician for Honda,

Kohler, Briggs & Stratton and Kubota engine repair. He’s completed training on concrete

repair and cleaning equipment for; Allen Engineering, Advance, Tennant, Blastrac, Karcher,

SPE, Graco Sprayers, Multiquip, Husqvarna and Edco.

Service Rates: $85 per hour (minimum half hour service charge)

23

Cleveland: (800) 362-9267

Canton: (877) 258-7601 • Toledo: (800) 860-3352

www.chasephipps.com

NOTES:_____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Cleveland:Main Office & Warehouse

4560 Willow Parkway

Cleveland, OH 44125

(216) 641-2150 • (800) 362-9267

Toledo:Branch Office & Warehouse

12450 Williams Road

Perrysburg, OH 43551

(419) 874-0033 • (800) 860-3352

Canton:Branch Office & Warehouse

2993 Perry Drive SW

Canton, OH 44706

(330) 754-0467 • (877) 258-7601

www.chasephipps.com