EQUIA (PPT for Packaging)

Embed Size (px)

Citation preview

  • 8/4/2019 EQUIA (PPT for Packaging)

    1/23

  • 8/4/2019 EQUIA (PPT for Packaging)

    2/23

    The ideal restorative material should offer: Aesthetics combined with strength

    Biocompatibility and ease of use

    Polishability and wear resistance

    Physical strength and stability

    Self-adhering properties Fast setting

  • 8/4/2019 EQUIA (PPT for Packaging)

    3/23

    Introducing EQUIA: One Capsule One Coat One Restoration

    EQUIA is the first self-adhesive PosteriorRestorative that balances quick and easy

    handling with excellent Aesthetics:

    Easy

    Quick

    UniqueIntelligent

    Aesthetic

  • 8/4/2019 EQUIA (PPT for Packaging)

    4/23

    EQUIA is available

    in eight shades plusan assorted kit:

    A1, A2, A3, A3.5,

    B1, B2, B3, C4

    Assorted kit:

    A2, A3, A3.5, B1,

    B3 (10 each)

    *Added Bonus*GC Cavity Conditioner

  • 8/4/2019 EQUIA (PPT for Packaging)

    5/23

    IndicationsEQUIA is a complete system that is an ideal

    solution for posterior restorations:

    Class I, II and V posterior restorations

    Composite replacement

    Amalgam replacement High caries risk patients

    Pediatric patients

    Geriatric patients

    Special needs patients

  • 8/4/2019 EQUIA (PPT for Packaging)

    6/23

    EQUIA is a system that combines Fuji IX GP EXTRA and G COAT PLUS

    Self Adhesive

    Higher Translucency

    High Fluoride release

    Self Curing Reduce risk of secondary caries

    Bulk Filling

    Finishing and Polishing in 2

    minutes

    Increases flexural strength of Fuji IX GPEXTRA restoration by 90%.(IADR #0487)

    Provides a high gloss and smooth surface

    Contains nano-fillers that disperse evenlyleading to high wear resistance

    Reduces post-operative sensitivity towater

    Light Curing

    Self Adhesive

    +

  • 8/4/2019 EQUIA (PPT for Packaging)

    7/23

    EQUIA

    Self Adhesive

    Enhanced Strength

    Packable and non-sticky

    High fluoride release atinterface and over time withrecharge

    Optimal Marginal seal thatoffers long term resistance tomicro leakage anddiscoloration.

    Total working/setting time isunder 3 minutes 30 seconds.

  • 8/4/2019 EQUIA (PPT for Packaging)

    8/23

    EQUIA - Procedure

    Prepare the cavity. Bulk fill GC Fuji IXGP EXTRA, condense

    and carve to shape.

    Final finishing using asuperfine diamond.

    Rinse and dry.

    Apply G-COAT PLUSand light cure 20

    seconds.

    Final restoration.

    Optional Step

    Prior to bulk fill, applyGC Cavity Conditioner,

    then rinse and dry.(Do not Desiccate.)

  • 8/4/2019 EQUIA (PPT for Packaging)

    9/23

    Clinical case Dr. Lassocinski

  • 8/4/2019 EQUIA (PPT for Packaging)

    10/23

    EQUIA is Easy Moisture tolerant

    Works well in areas thatcannot be isolated with rubber

    dam

    Self adhesive properties Strong proven chemical

    adhesion without need to usebonding agents

    Chemical setting of Fuji

    IX GP EXTRA Bulk placement: no need for

    layering

    SEM Image Interface Fuji IX EXTRA / Bovinedentine (X 10,000)

    With Cavity Conditioner, After 1 day, # 600polishing

    Source: GCC R&D

    Fuji IX GP EXTRA

    Bovine dentin

  • 8/4/2019 EQUIA (PPT for Packaging)

    11/23

    EQUIA is Easy Unique adhesive monomer in G-

    COAT PLUS

    Offers chemical adhesion betweencoating, restoration and tooth

    Insures tooth margin protection

    Proven chemistry e.g. (G-Bond)SEM Image Interface G-COAT PLUS/Restorative material (X 4000)

    Source: GCC R&D

    Fuji IX GP

    G-COAT PLUS

    better

    -2

    -1

    0

    1

    2

    34

    5

    6

    7

    8

    9

    UC-40 BisCoverTensilebond

    str

    ength

    [MPa

    Fuji IX GP FAST

    Bovine Enamel(#600 SiC)

    Bovine Dentin(#600 SiC)

    Source: GCC R&D

  • 8/4/2019 EQUIA (PPT for Packaging)

    12/23

    Enamel Dentin

    G-COAT PLUS

    Restorative Material

    These pictures show G-COAT PLUS can bond alsoto tooth structure (enamel & dentin)

    G-COAT PLUS G-COAT PLUS

    RestorationEnamel Dentin

    G-COAT PLUS Bonding interface (SEM)Equia - Easy

    Source: GCC R&D

  • 8/4/2019 EQUIA (PPT for Packaging)

    13/23

    EQUIA is Quick Extra fast setting time

    Shorter polishing time Application of a gloss instead of time consuming polishing with

    rotating instruments

    Only 3 minutes 30 seconds needed from capsule

    mixing to patient dismissing!

  • 8/4/2019 EQUIA (PPT for Packaging)

    14/23

    The surface becomes rough

    and loses gloss due to wear ordissolution.

    G-COAT PLUS protects restorationfrom wear or dissolution and

    keeps the surface glossy

    Finished restoration

    Final polishing without usingG-COAT PLUS

    Coating with G-COAT PLUSwhich contains uniformly-dispersed nanofillers

    Finishingandpolishing

    G-COAT PLUS

    Restoration

    EQUIA is Unique

  • 8/4/2019 EQUIA (PPT for Packaging)

    15/23

    Fuji IILC

    Fuji IXGP

    G-COAT PLUS fills-in surfaceporosities of Fuji IX GP EXTRA.

    100um 100um

    Some voids areobserved.

    A smooth surface isobtained.

    (SEM

    imagesx1000)

    Fuji IX GP EXTRAPolished by using silicon

    carbide paper (#600)

    After coating

    EQUIA - Unique

    10m

    Source: GCC R&D

  • 8/4/2019 EQUIA (PPT for Packaging)

    16/23

    G-COAT PLUS fills in surface porosity of Fuji IX GP EXTRA.

    Smooth surfacewith G-COAT PLUS

    100um

    G-COAT PLUS layer(approx. 30 um)

    (x500)

    EQUIA is Unique Cross section of Fuji IX GP EXXTRA and G-COAT

    PLUS

    Source: GCC R&D

  • 8/4/2019 EQUIA (PPT for Packaging)

    17/23

    Mechanical Stress

    Mechanical stress concentrate onsurface voids and gaps.

    Then, cracks are formed.

    Mechanical stress dispersed on the

    smooth and tough coating layer.

    EQUIA is Unique

    Mechanical Stress

    Coating

    GIC

    GIC Restoration

    Protection from cracking

  • 8/4/2019 EQUIA (PPT for Packaging)

    18/23

    EQUIA is Intelligent Improvement of the properties of the

    restoration in time After several months through uniform abrasion of G-

    COAT PLUS the material becomes harder through uniquematuration effect of saliva

    Red: Coated until 80 days, soaked in saliva

    At 80 days, coating was removed and soaked in saliva again.Maturation increased much more than when the material wasuncoated. Afterwards surface hardness increases.

    60

    80

    100

    120

    0 40 80 120 160Vickers-hard

    nessnum

    ber/Hv

    immersed time / day

    Orange: Uncoated, soaked in Saliva

    Surface hardness became saturated after 40 days.

    Light blue: Coated until 80 days, soaked in distilledwater

    Different from red line, surface hardness did not changeafter coat was peeled off.

    Blue: Uncoated, soaked in distilled water

    Better

    Source: IADR 2006 #2076

  • 8/4/2019 EQUIA (PPT for Packaging)

    19/23

    EQUIA - Intelligent

    Excellent biocompatibility

    No need for liner application, except whenvery close to the pulp

    No relevant shrinkage during setting

    Thermal expansion similar to tooth structure

    Fluoride release Offers protection at the interface

    Tooth friendly restorations!

  • 8/4/2019 EQUIA (PPT for Packaging)

    20/23

    EQUIA is Aesthetic

    Unique optical property of new generation glass

    fillers Translucency never acheived with conventional glass

    ionomer technology

    Impressive shade matching capacities

    Fuji IX GP EXTRA

    Unique glass ionomertranslucency

    Fuji IX GP EXTRA

    Class I cavity in artificial teeth1 hour after mixing

    Shade A2

  • 8/4/2019 EQUIA (PPT for Packaging)

    21/23

    EQUIA is Aesthetic

    EXTRA gloss with coating

    Nice-looking restoration Smoothness equivalent to natural tooth structure

    Coated and non-coated (polished with #600 paper) disks.

  • 8/4/2019 EQUIA (PPT for Packaging)

    22/23

    EQUIA is Aesthetic EXTRA gloss with coating

    G-COAT PLUS has a low surface roughness, even afterwear testing.

    Surface roughness during wear test

    0,0

    0,2

    0,4

    0,6

    0,8

    1,0

    1,2

    1,4

    0 5.000 10.000 15.000 20.000 25.000

    Cycle numbers

    Surfaceroughness[u

    Without G-Coat PLUS With G-Coat PLUS

    Better

    Source: GCC R&D

  • 8/4/2019 EQUIA (PPT for Packaging)

    23/23

    Please call GC America at:

    Customer Service (800) 323-7063

    If you are interested in participating in future

    product evaluations please e-mail us at:[email protected]

    Web site:

    www.gcamerica.com