Energy saving – Indoor lighting

Indoor lighting

• Most of the old light are Metal halide 400w.

• MH is old technology that create a lot of heat with low CRI.

• T5 is new technology which produce high quality light with low

consumption .

• T5 life time is double then old MH tubes.

• In the new T5 technology the light output reduced in 5% for the

life time , where on MH the light output decreased by 50%.

• T5 works with Electronic ballast.

• The ROI for replacing MH to T5 is less than 18 months.

• There are 4X54 6X54 8X54 10X54 and 12 X54 .

• Taylor made products for custom photometric angles.

Case Study – T5IE

Before with HPS After with T5s

Before After

Case Study – T5L

Case Study – T5AJ