38
i-konIII Electronic Blasting System | Product Catalog | July 2020 1 General i-kon™ III ELECTRONIC BLASTING SYSTEM PRODUCT CATALOG NORTH AMERICA JULY 2020

Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

  • Upload
    others

  • View
    6

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 1

General

i-kon™ III ELECTRONIC BLASTING SYSTEM PRODUCT CATALOG NORTH AMERICA

JULY 2020

Page 2: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 2

General

CONTENTS

i-kon™ III System Hardware 6

i-konTM III Logger I 6

i-konTM III Logger II 6

i-konTM III Blaster 400 7

i-konTM III Blaster 3000 LAN / WLAN 7

i-konTM III Blaster 3000 SATEL 8

i-konTM III Blaster 3000 Analogue Telephone 8

i-konTM III Blaster 3000 Leaky Feeder UHF 9

i-konTM III UG B3000 Head End Modem Leaky Feeder (UHF) 9

i-konTM III Blaster 3000 Leaky Feeder VHF 10

i-konTM III UG B3000 Head End Modem Leaky Feeder (VHF) 10

i-konTM III Blaster 3000 Moxa 11

i-konTM III Leaky Feeder LAN Extender Kit 11

i-konTM III Blaster 3000 LTE 12

i-kon™ III Accessories (Cables, Connectors, and Miscellaneous) 13

SHOTPlus™ Software 13

EBS XS880 SERIAL Converter, USB 2.0 TO RS232 13

EBS Connector Dock 13

EBS Connection Box for Logger I & Logger II 14

Universal Beep Booster 14

i-kon™ Field Connector 6 14

i-kon™ Field Connector 6 with 100g Grease Tube 15

EBS Silicone Grease 15

Copy Cable 15

Download Cable 16

Stethoscope Cable 16

Connection Cable Logger I or II to Blaster 16

90° Connection Cable Logger I or II to Blaster 17

EBS Banana Plug to Alligator Clip Test Lead 17

EBS Banana to Banana Connection Cable 17

Logger I or II to Splice Cable 17

Spare B3000 Analogue Phone Cable 18

Blaster 3000 LAN Network Cable 18

Page 3: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 3

General

Spare B3000 Cable to LAN Modem 18

EBS Multi Use Charger 18

EBS Multi Use Vehicle Charger 19

Blaster 3000 AC Power Supply 19

i-kon™ 2.2 KΩ Resistor 19

EBS Protective Cable End CAP 19

UG B3000 Cap Antenna Socket 20

i-kon™ Charging Port Connector Cap for B3000 20

EBS Equipment Binder Cap 20

EBS Wire Deployment Tool 20

EBS Carry Bag Strap 21

EBS Sling Bag 21

Logger I Nylon Carry Bag (Blue) 21

Blaster 400 Nylon Carry Bag (Red) 21

EBS Scanner 200/260, Logger II, & Tester III Bag 22

EBS Shoulder Harness 22

EBS Logger II Carrying Bag 22

EBS Black Right Sling Bag 22

EBS Black Left Sling Bag 23

EBS Cargo Sling 23

EBS Harness System 23

EBS Antenna 90° TNC Elbow 23

EBS Antenna (440-470MHz) TNC 24

EBS TNC Magnetic Mobile Antenna Base 24

UG B3000 Leaky Feeder Antenna (VHF) 25

UG B3000 Leaky Feeder Antenna (UHF) 25

EBS Leaky Feeder Antenna 90* BNC Elbow 26

UG B3000 Leaky Feeder Antenna 26

UG B3000 Leaky Feeder Antenna Magnetic Base 26

UG B3000 Leaky Feeder Connection Cable 27

UG B3000 Leaky Feeder Extension Cable 27

i-kon™ III Accessories (Dongle and Keys) 28

Blaster 400 Firing Key 28

Blaster 3000 Dongle Remote (Blue) with Lanyard 28

Blaster 3000 Dongle Master (Red) with Lanyard 28

Page 4: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 4

General

i-kon™ III Accessories (Training Aids) 29

i-kon™ Dummy Puck 29

EBS Universal dummy puck with a latch on LED. 29

EBS Universal Dummy Puck 29

i-kon™ III Accessories (EBS Cold Weather Warming Pouch (CWWP)) 30

EBS Cold Weather Warming Pouch for Logger I 30

EBS Cold Weather Warming Pouch for Logger II 30

EBS Extension Cable 30

EBS Cold Weather Warming Pouch Spare Battery 31

EBS Cold Weather Warming Pouch Charger 31

i-kon™ III Accessories (EBS Cold Weather Warming Box (CWWB)) 32

EBS Cold Weather Warming Box (CWWB) 32

EBS Cold Weather Warming Box (CWWB-2) 32

EBS Cold Weather Warming Box (CWWB-3) 33

EBS Cold Weather Warming Box (CWWB-4) 33

EBS Cold Weather Warming Box Generator 33

EBS Cold Weather Warming Box Set 34

i-kon™ III Obsolete Hardware & Accessories 35

i-konTM III Blaster 2400S 35

SAP Code: XB2400S 35

i-konTM III Blaster 2400R with Easy Modem 35

i-konTM III Surface Remote Blasting System (SURBS) with Easy Modem 35

i-konTM III Analogue Telephone Remote Blast Box (RBB) 35

i-konTM III LAN/WLAN Remote Blast Box (RBB) 35

i-konTM III Leaky Feeder Remote Blast Box (RBB) 35

i-konTM III Leaky Feeder Remote Blast Box (RBB) 35

i-konTM III Analogue Telephone Lock Box (LB) 35

i-konTM III LAN/WLAN Lock Box (LB) 36

i-konTM III Leaky Feeder Lock Box (LB) (UHF) 36

i-konTM III Leaky Feeder Lock Box (LB) (VHF) 36

CEBS Analogue Lockbox modem spare 36

Synchronization Cable 36

Spare RBB Phone Cable, Heavy Duty, 10’ 36

Spare RBB Phone Cable, Heavy Duty, 3’ 36

Page 5: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 5

General

Spare RBB cable to LAN modem 15’ 36

Blaster 2400S Charger Type G 37

SURBS/B2400R Charger 37

CEBS RBB Charger 37

Lockbox/Remote Blast Box Spare Key 37

SURBS Dongle (Black) 37

RBB Smart Dongle (White) 37

Lockbox Master Dongle (Green) 37

Blaster 2400S Firing Key 37

i-konTM LAN/WLAN WIPORT WIFI ANTENNA 38

Page 6: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 6

General

i-kon™ III System Hardware

i-konTM III Logger I SAP Code: 1002530 (XREL)

A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per Logger I. An inherently safe device used on bench to communicate and assign delay times and firing sequences to i-kon™ detonators. Logger unit includes: Description SAP Code

− EBS Multi use Charger 1002637 (XCHGRH)

− EBS Carry Bag Strap 1024229 (XRESTRAP)

− Connection Cable Logger I or II to Blaster 1002635 (XCONCD)

− Logger I Nylon Carry Bag (Blue) 1002601 (XBAGLOG)

(A limited number of units are available. Extra Accessories are available)

All included accessories can be purchased separately.

i-konTM III Logger II SAP Code: 1007432 (XRELII)

The Logger II is used to register (log) i-kon™ detonators and test the detonator network. When logging a detonator, the Logger stores the detonator ID and the following data:

− Logging in automatic or manual (values or increment) mode: o Position in the order of logging o Delay time

− Logging in delay number mode: o Position in the order of logging o Delay number

− Logging in SHOTPlus mode: o Position in the designed order o Borehole identification o Delay time

− Test functions

− The Logger II measures the current in the detonator network and announces leakage warnings.

− The Logger II tests the responses of the detonators and announces detonator errors.

Logger II unit includes: Description SAP Code

− EBS Multi use Charger 1002637 (XCHGRH)

− EBS Carry Bag Strap 1024229 (XRESTRAP)

− Connection Cable Logger I or II to Blaster 1002635 (XCONCD)

− EBS Logger II Carrying Bag 1010835 (XAC02090)

All included accessories can be purchased separately.

Page 7: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 7

General

i-konTM III Blaster 400 SAP Code: 1002638 (XB400E)

A hand-held device able to provide the voltage and digital signal required to fire up to 400 detonators via two Loggers I from a safe location. Blaster 400 unit includes: Description SAP Code

− EBS Multi use Charger 1002637 (XCHGRH)

− EBS Carry Bag Strap 1024229 (XRESTRAP)

− Blaster 400 Firing Key 1023204 (XB400DONG)

− Blaster 400 Nylon Carry Bag (Red) 1002600 (XBAGB400) All included accessories can be purchased separately.

i-konTM III Blaster 3000 LAN / WLAN SAP Code: 1025093 (XAC02181)

The B3000 is used to initiate the detonator arrays. B3000 has great performance and multiple interesting features such as:

• Used as a Single Blaster which can fire up to 3000 detonators

• Multiple Remote capability to control up to 6 Remote

• Remote Synchro capability

• Single frequency of operation

• Multi-functional blaster o Capability to be converted to any Blaster 3000 version after

internal changes are performed by Service Provider

• Single blast report on the Controller

• USB Interface for easy data transfer (firmware, reports)

• Compatible with Logger I and Logger II Blaster 3000 LAN / WLAM unit includes: Description SAP Code

• Blaster 3000 Dongle Master (Red) 1011997 (XAC02004)

• Blaster 3000 Dongle Remote (Blue) 1011998 (XAC02005)

• Blaster 3000 LAN 16.5' Network Cable 1025271 (XAC02188)

• Blaster 3000 AC Power Supply 1012930 (XREB3000PSII) All included accessories can be purchased separately.

Page 8: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 8

General

i-konTM III Blaster 3000 SATEL SAP Code: 1012937 (XB3000SATEL)

The B3000 is used to initiate the detonator arrays. B3000 has great performance and multiple interesting features such as:

• Used as a Single Blaster which can fire up to 3000 detonators

• Multiple Remote capability to control up to 6 Remote

• Remote Synchro capability

• Repeater capability

• Single frequency of operation

• Multi-functional blaster o Capability to be used as a LAN / WLAN unit

• Single blast report on the Controller

• USB Interface for easy data transfer (firmware, reports)

• Improved RF communication

• Compatible with Logger I and Logger II i-kon™ II Blaster 3000 SATEL has frequency range of 440MHz to 470MHz. Blaster 3000 unit includes: Description SAP Code

• Blaster 3000 Dongle Master (Red) 1011997 XAC02004

• Blaster 3000 Dongle Remote (Blue) 1011998 XAC02005

• EBS Antenna (440-470MHz) 12" TNC 1004137 (XSURBSPRANT)

• B3000 Antenna 90° Elbow 1013309 (XSURBSWST)

• Blaster 3000 AC Power Supply 1012930 XREB3000PSII All included accessories can be purchased separately.

i-konTM III Blaster 3000 Analogue Telephone SAP Code: 1025096 (XAC02184)

The B3000 is used to initiate the detonator arrays. B3000 has great performance and multiple interesting features such as:

• Used as a Single Blaster which can fire up to 3000 detonators

• Multiple Remote capability to control up to 6 Remote

• Remote Synchro capability

• Single frequency of operation

• Multi-functional blaster o Capability to be used as a LAN / WLAN unit after internal

changes are performed by Service Provider or Field Representative

• Single blast report on the Controller

• USB Interface for easy data transfer (firmware, reports)

• Compatible with Logger I and Logger II Blaster 3000 Analogue Telephone unit includes: Description SAP Code

• Blaster 3000 Dongle Master (Red) 1011997 (XAC02004)

• Blaster 3000 Dongle Remote (Blue) 1011998 (XAC02005)

• LB & B3000 Analogue Phone Cable 14’ 1013162 (XAPC3M) RJ-11 6P4C Modular Straight Cable9

• Blaster 3000 charger 1012930 (XREB3000PSII) All included accessories can be purchased separately.

Page 9: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 9

General

i-konTM III Blaster 3000 Leaky Feeder UHF SAP Code: 1025095 (XAC02183)

The B3000 is used to initiate the detonator arrays. B3000 has great performance and multiple interesting features such as:

• Used as a Single Blaster which can fire up to 3000 detonators

• Multiple Remote capability to control up to 6 Remote

• Remote Synchro capability

• Single frequency of operation

• Multi-functional blaster o Capability to be used as a LAN / WLAN unit

• Single blast report on the Controller

• USB Interface for easy data transfer (firmware, reports)

• Requires HE split port modem to act as router

• Compatible with Logger I and Logger II i-kon™ II Blaster 3000 Leaky Feeder UHF has a frequency range from 450MHz to 480MHz, 12.5 KHz. Blaster 3000 Leaky Feeder UHF unit includes: Description SAP Code

• Blaster 3000 Dongle Master (Red) 1011997 (XAC02004)

• Blaster 3000 Dongle Remote (Blue) 1011998 (XAC02005)

• B3000 Leaky Feeder Antenna (UHF) 1017691 (XICBSALF)

• B3000 Antenna 90° Elbow 1017617 (XICBSALFH) BNC Connector

• Blaster 3000 AC Power Supply 1012930 (XREB3000PSII) This is used in conjunction with a UG B3000 Head End Modem Leaky Feeder (UHF) All included accessories can be purchased separately.

i-konTM III UG B3000 Head End Modem Leaky Feeder (UHF) SAP Code: 1007349 (XRESPLTUHFRM) (UHF Modem)

This is used in conjunction with a Blaster 3000 Leaky Feeder UHF

Page 10: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 10

General

i-konTM III Blaster 3000 Leaky Feeder VHF SAP Code: 1025094 (XAC02182)

The B3000 is used to initiate the detonator arrays. B3000 has great performance and multiple interesting features such as:

• Used as a Single Blaster which can fire up to 3000 detonators

• Multiple Remote capability to control up to 6 Remote

• Remote Synchro capability

• Single frequency of operation

• Multi-functional blaster o Capability to be used as a LAN / WLAN unit

• Single blast report on the Controller

• USB Interface for easy data transfer (firmware, reports)

• Compatible with Logger I and Logger II i-kon™ II Blaster 3000 Leaky Feeder VHF has a frequency range from 148MHz to 174MHz, 12.5 KHz. Blaster 3000 Leaky Feeder VHF unit includes: Description SAP Code

• Blaster 3000 Dongle Master (Red) 1011997 (XAC02004)

• Blaster 3000 Dongle Remote (Blue) 1011998 (XAC02005)

• B3000 Leaky Feeder Antenna (VHF) 1006910 (XICBSSALFVHF)

• B3000 Antenna 90° Elbow 1017617 (XICBSALFH) BNC Connector

• Blaster 3000 AC Power Supply 1012930 (XREB3000PSII) This is used in conjunction with a UG B3000 Head End Modem Leaky Feeder (VHF) All included accessories can be purchased separately.

i-konTM III UG B3000 Head End Modem Leaky Feeder (VHF) SAP Code: 1024256 (XREDCBSHMLFNA) (VHF Modem)

This is used in conjunction with a Blaster 3000 Leaky Feeder VHF

Page 11: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 11

General

i-konTM III Blaster 3000 Moxa SAP Code: 1026709 (XAC02199)

The B3000 is used to initiate the detonator arrays. B3000 has great performance and multiple interesting features such as:

• Used as a Single Blaster which can fire up to 3000 detonators

• Multiple Remote capability to control up to 6 Remote

• Remote Synchro capability

• Single frequency of operation

• Multi-functional blaster o Capability to be used as a LAN / WLAN unit

• Single blast report on the Controller

• USB Interface for easy data transfer (firmware, reports)

• Compatible with Logger I and Logger II Blaster 3000 Moxa unit includes: Description SAP Code

• Blaster 3000 Dongle Master (Red) 1011997 (XAC02004)

• Blaster 3000 Dongle Remote (Blue) 1011998 (XAC02005)

• Blaster 3000 LAN 16.5' Network Cable 1025271 (XAC02188)

• Blaster 3000 AC Power Supply 1012930 (XREB3000PSII) This is used in conjunction with a Leaky Feeder LAN Extender Kit & UG B3000 Head End Modem Leaky Feeder (UHF or VHF) All included accessories can be purchased separately.

i-konTM III Leaky Feeder LAN Extender Kit SAP Code: 1026708 (XAC02198)

This is used in conjunction with a Blaster 3000 Moxa & UG B3000 Head End Modem Leaky Feeder (UHF or VHF) Leaky Feeder LAN Extender Kit unit includes:

− Moxa 5110A-T Serial Ethernet Modem

− Shielded CAT6 Network Cable, Black (6')

− RS-232 Male to Female Cable, Black (6')

− DC Power Plug to Bare-Wires Cable for Moxa 5110A-T Modem

Page 12: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 12

General

i-konTM III Blaster 3000 LTE SAP Code: TK555L 1031834 (XAC02259) TK525L 1031852 (XAC02258)

The B3000 is used to initiate the detonator arrays. B3000 has great performance and multiple interesting features such as:

• Used as a Single Blaster which can fire up to 3000 detonators

• Multiple Remote capability to control up to 6 Remote

• Remote Synchro capability

• Single frequency of operation

• Multi-functional blaster o Capability to be used as a LAN / WLAN unit

• Single blast report on the Controller

• USB Interface for easy data transfer (firmware, reports)

• Compatible with Logger I and Logger II

Blaster 3000 LTE unit includes: Description SAP Code

• Blaster 3000 Dongle Master (Red) 1011997 (XAC02004)

• Blaster 3000 Dongle Remote (Blue) 1011998 (XAC02005)

• Blaster 3000 AC Power Supply 1012930 (XREB3000PSII) All included accessories can be purchased separately.

Page 13: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 13

General

i-kon™ III Accessories (Cables, Connectors, and Miscellaneous)

SHOTPlus™ Software SHOTPlus™ is blast design and modelling software to optimize every blast. SHOTPlus™ Standard, SHOTPlus™ Premier, SHOTPlus™ UG, and SHOTPlus™ for Tunnels blast design and modelling technologies enable users to design, visualize and analyse blast initiation sequences across surface and underground mining, quarry and construction applications. The highly visual interface makes the program easy to use and provides full Windows® functionality. More information including Software link and Product key, please contact the Blast IQ Team via e-mail at: [email protected]

EBS XS880 SERIAL Converter, USB 2.0 TO RS232 SAP Code: 1006257 (XEBSUSB2RS232)

Serial (RS232) to USB converter has a length of 12in (0.3m) and compatible with:

• Windows 10 32/64

• Windows 7 32/64

• Vista 32/64

• XP 32/64.

EBS Connector Dock SAP Code: 1007132 (XILOGIID)

The EBS Connector Dock is an i-kon™ accessory that can ONLY be used for i-kon™ type connectors. It is a tool for logging the detonator without the need to open the connector (i-kon™ connectors only).

Page 14: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 14

General

EBS Connection Box for Logger I & Logger II SAP Code: 1013163 (XEBSCB)

The EBS connection box is to connect multiple Loggers I or Logger II to the firing cable. Connect Loggers I or Logger II to the ports 1 to 6. If you have more than 6 Logger I or Logger II, connect another EBS Connection box to the "IN" terminals and Connect the firing cable to the "OUT" terminals. EBS Connection Box unit includes: Description SAP Code

− EBS Banana to Banana Connection 1013070 (XEBSCBC) Cable (Sold separately)

Universal Beep Booster SAP Code: 1002602 (XBEEPP1)

Amplifies the Logger’s & Scanner’s beep for logger/scanner confirmation.

• Works with Logger I

• Works with Logger II (Hardware version 1.5 minimum, and firmware version 1.5.81 or higher)

• Works with eDev™ II Scanner 260 (Hardware version 1.5a minimum, and firmware version 2.11b or higher)

• Works with uni tronic™ 600 Scanner 200 (Hardware version 1.5a minimum, and firmware version 2.11b or higher)

i-kon™ Field Connector 6 SAP Code: 1018762 (XAC02066)

A box of 100 insulation displacement blue connectors to carry signal from the i-kon™ detonator to i-kon™ duplex harness wire.

Page 15: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 15

General

i-kon™ Field Connector 6 with 100g Grease Tube SAP Code: 1020269 (XAC02065)

A box of 100 insulation displacement blue connectors to carry signal from the i-kon™ detonator to i-kon™ duplex harness wire, including a Tube of 100g of Silicone Grease.

EBS Silicone Grease SAP Code: 1013154 (XEBSSTSC444)

100g Tube of T-SC Silicone Grease to insulate the harness wire connection to the Connector 6 IDC Terminals

Copy Cable SAP Code: 1002527 (XCCB)

Cable is used to copy data contained on one Logger I to another Logger I and has a length of 39in (1m). (Previously used to set-up frequency synchronization between a Blaster 2400R and a Surface Remote Blasting Box.)

“To be used with i-konTM Logger I only”

Page 16: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 16

General

Download Cable SAP Code: 1002528 (XDCA) 3.25ft (1m), Type A 1020374 (XDCA6) 6ft (1.83m)

Cables used for data transfer between the Logger I and Orica SHOTPlus™-i program, which downloads reports from Loggers I and Blast Boxes to a computer.

“Not compatible with Blaster 3000”

Stethoscope Cable SAP Code: 1012548 (XSTETHCBLII)

This 16in (0.4m) cable allows for quick connection between i-kon™ Logger I or Logger II and i-kon™ harness wire for trouble shooting.

Connection Cable Logger I or II to Blaster SAP Code: 1002635 (XCONCD)

Spare connection cable from Logger I or Logger II to the blasting equipment with a length of 39in (1m).

Page 17: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 17

General

90° Connection Cable Logger I or II to Blaster SAP Code: 1011548 (XCONCDII90)

Spare connection cable from Logger I or Logger II to the blasting equipment with a length of 39in (1m).

EBS Banana Plug to Alligator Clip Test Lead SAP Code: 1020395 (XEBSBPACTL)

A useful tool, when attached to a Logger I or Logger II, that can be attached easily to exposed copper wires on blast lines, firing lines, or harness wires, to test for leakage, errors, or extraneous voltage. The cable is 36in (0.9m) long and used for eDevTM II Scanner 260, OseisTM Tester III, and uni tronicTM 600 Scanner 200.

EBS Banana to Banana Connection Cable SAP Code: 1013070 (XEBSCBC)

EBS Banana to Banana Connection Cable used to connect an eDev II Blast Box 610c with a i-kon II Blaster 3000 with a length of 36in (0.9m). Also, used injunction with EBS Connection Box for Logger I and Logger II (1013163 [XEBSCB]).

Logger I or II to Splice Cable SAP Code: 1012537 (XRELSCII)

39in (1m) Splice Cable. Allows you to use harness wire to quickly connect multiple Loggers to a blast line or Blaster 3000 in parallel setup.

Page 18: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 18

General

Spare B3000 Analogue Phone Cable SAP Code: 1013162 (XAPC3M)

Cable, 14ft (4.3m) - RJ-11 6P4C Modular Straight Cable. (Previously for LB)

Blaster 3000 LAN Network Cable SAP Code: 1025271 (XAC02188)

Cable, 16.5ft (5m) LAN Network Cable

Spare B3000 Cable to LAN Modem SAP Code: 1013023 (XCAT5ENC)

CAT5E Network Cable, 10ft (3m) Cat5e, 350Mhz, Snag less Patch Cable, White (Previously for LB)

EBS Multi Use Charger SAP Code: 1002637 (XCHGRH)

Charger, output 12V DC/1.25A, input 100-240V AC, 72in (1.8m) cable length. Used with Logger I, Logger II, and Blaster 400. Also used for eDevTM II Scanner 260, OseisTM Shooter II & Tester III, and uni tronicTM 600 Scanner 200.

Page 19: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 19

General

EBS Multi Use Vehicle Charger SAP Code: 1024252 (XVCHGR400)

Vehicle charger cable to charge Logger I, Logger II, and Blasters 400 has a 72in (1.8m) cable length. Also used for eDevTM II Scanner 260, OseisTM Shooter II & Tester III, and uni tronicTM 600 Scanner 200.

Blaster 3000 AC Power Supply SAP Code: 1012930 (XREB3000PSII)

Spare Blaster 3000 AC Power Supply with length of 40in (1m)

i-kon™ 2.2 KΩ Resistor SAP Code: 1012966 (X2K2BLTII)

Cable length 12in (0.3m)

EBS Protective Cable End CAP SAP Code: 1012506 (XEBSPCEC)

End Cap to protect binding connector for all EBS cables.

Page 20: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 20

General

UG B3000 Cap Antenna Socket SAP Code: 1013305 (XSURBSAKA)

Cap antenna socket to protect the Blaster 3000 antenna port.

i-kon™ Charging Port Connector Cap for B3000 SAP Code: 1020240 (XAC02030)

(Previously for RBB)

EBS Equipment Binder Cap SAP Code: 1007305 (XEBSIOEBC)

Binder cap to protect the binder Logger I & Blaster400 connector. Also works with:

− i-konTM Blaster 3000s

− i-konTM Logger II

− eDevTM II Scanner 260

− eDevTM II Belt Tester (RDI) (No Longer Supported)

− uni tronicTM 600 Scanner 200

− uni tronicTM 600 Belt Tester (RDI) (No Longer Supported)

− oseisTM Tester III

EBS Wire Deployment Tool SAP Code: 1020298 (XEBSWDT)

The wire deployment tool is to be used by blasters for wire deployment of EBS products on spools. The tool consists of a durable aluminum tube with ergonomic handle, attached to a retractable belt clip. The wire deployment tool is intended to be a portable and easy to use alternative to the wooden rod found in each case of i-kon™ product on spools. The tool will provide an improved wire deployment experience that blasters will love to use.

Page 21: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 21

General

EBS Carry Bag Strap SAP Code: 1024229 (XRESTRAP)

A spare strap to be used with: eDev™ II Scanner 260, i-kon™ II Logger, i-kon™ II Logger II, i-kon™ II Blaster400, oseis™ Tester III, oseis™ Shooter II, and uni tronic™ Scanner 200.

EBS Sling Bag SAP Code: 1012568 (XREOBAGWP)

A specially designed Yellow Sling Bag with a side Pocket to assist deployment of the EBS system at the face or on bench. Designed to deploy a single reel of the draw-from-center harness wire. Side pocket can be used to carry accessories, tools and/or equipment.

Logger I Nylon Carry Bag (Blue) SAP Code: 1002601 (XBAGLOG)

A specially designed carry bag with strap to keep Logger I dry and free from dust and grease.

Blaster 400 Nylon Carry Bag (Red) SAP Code: 1002600 (XBAGB400)

A specially designed carry bag with strap to assist keeping Blaster dry and free from dust and grease.

Page 22: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 22

General

EBS Scanner 200/260, Logger II, & Tester III Bag SAP Code: 1007022 (XEBSSCN2XXB)

Water resistance carrying bag for uni tronic™ Scanner 200, eDev™ Scanner 260, oseis™ Tester III, and i-kon™ Logger II.

EBS Shoulder Harness SAP Code: 1010833 (XAC02088)

A specially designed adjustable shoulder harness.

EBS Logger II Carrying Bag SAP Code: 1010835 (XAC02090)

A specially designed carry bag with strap to keep Logger II dry and free from dust and grease. This carry bag can be used with the EBS Shoulder Harness or by itself. - Including Neck Sling

EBS Black Right Sling Bag SAP Code: 1010836 (XAC02091)

A specially designed black Sling Bag for the right hip. Designed to deploy a single reel of the “draw-from-center” harness wire at the face or on bench. Includes a second pocket that can be used to carry accessories and tools.

Page 23: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 23

General

EBS Black Left Sling Bag SAP Code: 1010837 (XAC02092)

A specially designed black Sling Bag for the left hip. Designed to deploy a single reel of the “draw-from-center” harness wire at the face or on bench. Includes a second pocket that can be used to carry accessories and tools.

EBS Cargo Sling SAP Code: 1010834 (XAC02089)

Help to carry a Box

EBS Harness System The EBS Harness System is composed of the following items:

Description SAP Code EBS Shoulder Harness 1010833 (XAC02088) EBS Logger II Carrying Bag 1010835 (XAC02090) EBS Black Right Sling Bag 1010836 (XAC02091) EBS Black Left Sling Bag 1010837 (XAC02092) EBS Cargo Sling 1010834 (XAC02089)

EBS Antenna 90° TNC Elbow SAP Code: 1013309 (XSURBSWST)

An antenna 90° elbow to TNC connect the B3000 antenna to the side of the blast box. (Previously for SURBB)

Page 24: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 24

General

EBS Antenna (440-470MHz) TNC SAP Code: 1004137 (XSURBSPRANT)

A spare 12in (0.3m) Surface antenna for i-kon™ Blaster 3000. (Previously for i-kon™ SURBB and i-kon™ Blaster 2400R)

EBS TNC Magnetic Mobile Antenna Base SAP Code: 1024313 (XRTNCMMAB)

Magnetic Antenna Base for Surface & 12ft (3.6m) cable. This can be used with:

• I-konTM II Blaster 3000 SATEL Note: antenna is ordered separately.

Page 25: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 25

General

UG B3000 Leaky Feeder Antenna (VHF) SAP Code: 1006910 (XICBSSALFVHF)

VHF stubby antenna attaches to the B3000 equipment with the elbow. (Previously for CEBS) The antenna must be cut to the right length to function at desired frequency as per chart below.

Length in mm Frequency in MHz

160mm (6.30in) 148MHz

158mm (6.225in) 150MHz

156mm (6.15in) 152MHz

153mm (6.025in) 154MHz

151mm (5.95in) 156MHz

148mm (5.825in) 158MHz

146mm (5.75in) 160MHz

144mm (5.67in) 162MHz

142mm (5.60in) 164MHz

141mm (5.55in) 166MHz

139mm (5.47in) 168MHz

138mm (5.43in) 170MHz

136mm (5.35in) 172MHz

134mm (5.275in) 174MHz

132mm (5.20in) 176MHz

UG B3000 Leaky Feeder Antenna (UHF) SAP Code: 1017691 (XICBSALF)

UHF stubby antenna attaches to the B3000 equipment with the elbow. (Previously for CEBS) The antenna must be cut to the right length to function at desired frequency as per chart below.

Length in mm Frequency in MHz

200mm (7.87in) 375MHz

190mm (7.48in) 400MHz

180mm (7.08in) 422MHz

170mm (6.69in) 450-470MHz

160mm (6.30in) 470-490MHz

Page 26: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 26

General

EBS Leaky Feeder Antenna 90* BNC Elbow SAP Code: 1017617 (XICBSALFH)

An antenna 90° elbow to BNC connect the B3000 antenna to the side of the blast box. (Previously for RBB LF)

UG B3000 Leaky Feeder Antenna SAP Code: 1007443 (XLFSMA)

A portable antenna used in the B3000. Leaky Feeder Std Metal Antenna attaches to the Magnetic Base below (SAP# XLFDPAMB). (Previously for CEBS) The antenna must be cut to the right length to function at desired VHF or UHF frequency as per chart below.

ITEM FREQUENCY LENGTH in inch

1 138 -154 MHz 18in (457mm)

2 141 -158 MHz 17 ½in (445mm)

3 144 -162 MHz 17in (432mm)

4 146 -164 MHz 16 ¾in (425mm)

5 148 -166 MHz 16 ½in (419mm)

6 152 -170 MHz 16in (406mm)

7 156 -174 MHz 15 ½in (394mm)

8 160 -178 MHz 15 ¼in (387mm)

9 166 -184 MHz 14 ½in (368mm)

10 171 -189 MHz 14 in (356mm)

11 406 - 470 MHz 5 ¼ in (133mm)

12 450 - 480 MHz 4 5/16 (110mm)

UG B3000 Leaky Feeder Antenna Magnetic Base SAP Code: 1007077 (XLFDPAMB)

A leaky feeder antenna Magnetic Base used in the B3000. (Previously for CEBS) Leaky Feeder Antenna Magnetic Base comes with 10ft (3m) cable and male BNC connector.

Page 27: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 27

General

UG B3000 Leaky Feeder Connection Cable SAP Code: 1007131 (XLFDPCA)

A Leaky Feeder Cable used in the B3000. (Previously for CEBS) Leaky Feeder 5ft (1.5m) Cable with M/M BNC Connector. (From Head End Modem to Head End monitor cabinet)

UG B3000 Leaky Feeder Extension Cable SAP Code: 1007444 (XLFDPC)

A Cable used in the B3000. (Previously for CEBS) Leaky Feeder 34ft (10.4m) Cable with M/F connector. (From B3000 to Magnetic Antenna)

Page 28: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 28

General

i-kon™ III Accessories (Dongle and Keys)

Blaster 400 Firing Key SAP Code: 1023204 (XB400DONG)

Firing key required to activate communications and initiate the blasting sequence when using the Blaster 400. Note: A Blaster 400 key has a black cap

Blaster 3000 Dongle Remote (Blue) with Lanyard SAP Code: 1011998 (XAC02005)

Remote Dongles are marked with a blue belt and record access data on Remote Blasters. You cannot fire a blast with a blue Remote Dongle.

Blaster 3000 Dongle Master (Red) with Lanyard SAP Code: 1011997 (XAC02004)

The red marked Master Dongle is needed to control the blasting sequence and to fire the blast.

Page 29: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 29

General

i-kon™ III Accessories (Training Aids)

i-kon™ Dummy Puck SAP Code: 1007359 (XPUCKDUMMYII) (20cm) 1007111 (XPUCKIIHIGH) (20cm High leakage) (4.8 – 4.9mA) 1007119 (XPUCKIILOW) (20cm Low leakage) (1.4 – 1.5mA)

Dummy i-kon™ detonator series display used for training purposes.

EBS Universal dummy puck with a latch on LED. SAP Code: 1013094 (XPUCKDUMMYLED)

This universal dummy puck has features including a latching “fired” indication, an automatic LED reset after a period of 1 hour to save battery power, plus a pushbutton for resetting the “fired” indication. It can be used as a i-kon™, uni tronicTM 600, eDevTM II and oseisTM training puck. A replaceable lithium battery providing 150 hours of continuous LED operation.

EBS Universal Dummy Puck SAP Code: 1013086 (XEBSPUCKDUMMY)

This universal dummy puck is a basic dummy puck that can be used as a i-kon™ II, uni tronic™ 600, eDev™ II and oseis™ II training puck.

Note: Universal Dummy Puck and i-kon Dummy Puck cannot be mixed when logging

Page 30: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 30

General

i-kon™ III Accessories (EBS Cold Weather Warming Pouch (CWWP))

EBS Cold Weather Warming Pouch for Logger I SAP Code:1013130 (XEBSCWWP1)

The Cold Weather Warming Pouch (CWWP-1), is designed to contain a Logger I, Tester, B400, Shooter II or RDI tester and keep it at a reliable operating temperature in sub-zero conditions. It is designed so they can be operated while still inside the CWWP-1. The heater in the pouch is powered by a rechargeable 12VDC battery. Connections are made via sealed locking connectors.

EBS Cold Weather Warming Pouch for Logger I unit includes: Description SAP Code

− EBS Cold Weather Warming Pouch XEBSCWWPSB Spare Battery

− EBS Cold Weather Warming Pouch XEBSCWWPC Charger

+

EBS Cold Weather Warming Pouch for Logger II SAP Code: 1013131 (XEBSCWWP2)

The Cold Weather Warming Pouch (CWWP-2), is designed to contain a Logger II, Tester III, Scanner 260 or Scanner 200 and keep it at a reliable operating temperature in sub-zero conditions. It is designed so they can be operated while still inside the pouch. The heater in the pouch is powered by a rechargeable 12VDC battery. Connections are made via sealed locking connectors. EBS Cold Weather Warming Pouch for Logger II unit includes: Description SAP Code

− EBS Cold Weather Warming Pouch XEBSCWWPSB Spare Battery

− EBS Cold Weather Warming Pouch XEBSCWWPC Charger

The following Ext Cable must be ordered to complete The Cold Weather Warming Pouch Kit for Logger II.

________________________________________________________

EBS Extension Cable

SAP Code: 1010827 (XAC02082)

90° Banana plugs to EBS Connector with length of 24in (0.6m)

Page 31: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 31

General

EBS Cold Weather Warming Pouch Spare Battery SAP Code: 1013044 (XEBSCWWPSB)

Spare rechargeable 12VDC battery

EBS Cold Weather Warming Pouch Charger SAP Code: 1013132 (XEBSCWWPC)

Spare battery 12VDC charger

Page 32: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 32

General

i-kon™ III Accessories (EBS Cold Weather Warming Box (CWWB))

EBS Cold Weather Warming Box (CWWB) SAP Code: 1013027 (XEBSCWWB)

For SURBBS & (12x) Logger I The Cold Weather Warming Box (CWWB), is designed to contain a SURBB and a full complement of 12 loggers I and keep them at a reliable operating temperature in sub-zero conditions. It is designed so after the logging process is complete the equipment can be closed inside the boxes and all connections to the det. network are made externally. The heater in the box is powered externally from a 12VDC battery or the 12VDC supply portion of a gas generator. Connections are made via sealed locking connectors. (Pelican Case 1690 Dimension W: 33.36in (847mm) H: 18.23in (463mm) D: 28.44in (722mm))

EBS Cold Weather Warming Box (CWWB-2) SAP Code: 1013127 (XEBSCWWB2)

For Blaster 3000 The Cold Weather Warming Box (CWWB-2), is designed to contain a B3000 and keep it at a reliable operating temperature in sub-zero conditions. It is designed so after the logging process is complete the equipment can be closed inside the boxes and all connections to the det. network are made externally. The heater in the box is powered externally from a 12VDC battery or the 12VDC supply portion of a gas generator. Connections are made via sealed locking connectors. (Pelican Case 1610 Dimension W: 24.83in (630mm) H: 11.88in (300mm) D: 19.69in (500mm))

Page 33: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 33

General

EBS Cold Weather Warming Box (CWWB-3) SAP Code: 1013128 (XEBSCWWB3)

For (12x) Logger I The Cold Weather Warming Box (CWWB-3), is designed to contain a full complement of 12 logger I’s and keep them at a reliable operating temperature in sub-zero conditions. It is designed so after the logging process is complete the equipment can be closed inside the boxes and all connections to the det. network are made externally. The heater in the box is powered externally from a 12VDC battery or the 12VDC supply portion of a gas generator. Connections are made via sealed locking connectors.

(Pelican Case 1610 Dimension W: 24.83in (630mm) H: 11.88in (300mm) D: 19.69in (500mm))

EBS Cold Weather Warming Box (CWWB-4) SAP Code: 1013129 (XEBSCWWB4)

For (5x) Logger II The Cold Weather Warming Box (CWWB-4), is designed to contain a full complement of 5 logger II’s and keep them at a reliable operating temperature in sub-zero conditions. It is designed so after the logging process is complete the equipment can be closed inside the boxes and all connections to the det. network are made externally. The heater in the box is powered externally from a 12VDC battery or the 12VDC supply portion of a gas generator. Connections are made via sealed locking connectors.

(Pelican Case 1600 Dimension W: 24.25in (616mm) H: 8.68in (220mm) D: 19.43in (494mm))

EBS Cold Weather Warming Box Generator SAP Code: Ask for SAP Code (XEBSCWWBG)

For CWWB, CWWB-2, CWWB-3 & CWWB-4

Page 34: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 34

General

EBS Cold Weather Warming Box Set Including the following items

• EBS Cold Weather Warming Box (CWWB-2)

o SAP Code: 1013127 (XEBSCWWB2)

• EBS Cold Weather Warming Box (CWWB-4)

o SAP Code: 1013129 (XEBSCWWB4)

• EBS Cold Weather Warming Box Generator

o SAP Code: Ask for SAP Code (XEBSCWWBG)

Page 35: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 35

General

i-kon™ III Obsolete Hardware & Accessories

i-konTM III Blaster 2400S SAP Code: XB2400S

i-konTM III Blaster 2400R with Easy Modem SAP Code: XREB2400REM

i-konTM III Surface Remote Blasting System (SURBS) with Easy Modem SAP Code: XRESURBBEM

i-konTM III Analogue Telephone Remote Blast Box (RBB) SAP Code: XREDCBSR

i-konTM III LAN/WLAN Remote Blast Box (RBB) SAP Code: XREDCBSRLW

i-konTM III Leaky Feeder Remote Blast Box (RBB) SAP Code: XREDCBSRLFUHFNA (UHF Modem)

i-konTM III Leaky Feeder Remote Blast Box (RBB) SAP Code: XREDCBSRLFNA (VHF Modem)

i-konTM III Analogue Telephone Lock Box (LB) SAP Code: XREDCBSL

Page 36: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 36

General

i-konTM III LAN/WLAN Lock Box (LB) SAP Code: XREDCBSLLW

i-konTM III Leaky Feeder Lock Box (LB) (UHF) SAP Code: XREDCBSLLFUHF (UHF Modem)

i-konTM III Leaky Feeder Lock Box (LB) (VHF) SAP Code: XREDCBSLLF (VHF Modem)

CEBS Analogue Lockbox modem spare SAP Code: XREDCBSM

Synchronization Cable SAP Code: XSYNCF

Spare RBB Phone Cable, Heavy Duty, 10’ SAP Code: XRBBXCBL

Spare RBB Phone Cable, Heavy Duty, 3’ SAP Code: XRBBXCBLS

Spare RBB cable to LAN modem 15’ SAP Code: XREDCBSRLWCBL

Page 37: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 37

General

Blaster 2400S Charger Type G SAP Code: XCHGRG

SURBS/B2400R Charger SAP Code: XCHGRSURBB

CEBS RBB Charger SAP Code: XCHGRRBB

Lockbox/Remote Blast Box Spare Key SAP Code: XCEBSKEY

SURBS Dongle (Black) SAP Code: XSURBS

RBB Smart Dongle (White) SAP Code: XRBBSPRDGL

Lockbox Master Dongle (Green) SAP Code: XCBSSMSTRDI

Blaster 2400S Firing Key SAP Code: XB2400SKEY

Page 38: Electronic Blasting i-kon™ III ELECTRONIC BLASTING …...SAP Code: 1002530 (XREL) A hand-held logging and testing device capable of logging a maximum of 200 i-kon™ detonators per

i-kon™ III Electronic Blasting System | Product Catalog | July 2020 38

General

i-konTM LAN/WLAN WIPORT WIFI ANTENNA SAP Code: XRBBLWLA

Please note that the images in this catalogue are not to scale.

For further information on the full range of Orica’s Electronic Blasting Systems please visit our website

www.oricaminingservices.com or contact your local Orica Representative.

1 Nicholson Street, East Melbourne, Victoria, Australia.

© 2016 Orica Group. All rights reserved. All information contained in this document is provided for informational purposes only and is subject to change without notice. Since the Orica Group cannot anticipate or control the conditions under which this information and its products may be used, each user should review the information in the specific context of the intended application. To the maximum extent permitted by law, the Orica Group specifically disclaims all warranties express or implied in law, including accuracy, non-infringement, and implied warranties of merchantability or fitness for a particular purpose. The Orica Group specifically disclaims, and will not be responsible for, any liability or damages resulting from the use or reliance upon the information in this document.

The word Orica and the Ring device are trademarks of the Orica Group.