ELECTRO CONDUCTIVECOATINGS FOR EMI SHIELDING AND STATIC CONTROL

ECP 500 SERIES

STATIC CONTROL PAINTSTBA-PS have a range of electrically conductive paints for use in electrostatically sensitive applications. Compatible with most plastics and metal substrates, the paints meet the requirements of BS IEC 61340-5-1:2001 (Basic Specification: Protection of electrostatic sensitive devices) and suitable for use in Atex hazardous environments

ECP 529 Single pack water based static dissipative paint

ECP 531 Single pack black conductive acrylic paint

ECP 534 Static dissipative polyester powder coating

ECP 535 Single pack colourable static dissipative acrylic paint

ECP 536 Single pack flexible black conductive polyurethane paint

ECP 537 Single pack high temperature static dissipative silicone/acrylic paint

ECP 538 Single pack static dissipative stoving enamel paint

ECP 539 Single pack water based static dissipative acrylic paint

ECP 581 Black conductive acrylic aerosol

ECP 585 Coloured acrylic aerosol

ECP 589 Water based static dissipative acrylic pump spray

FLOOR PAINTECP 525 Two pack water based static dissipative epoxy floor paint

ECP 526 Two pack water based conductive epoxy floor paint

ECP USE DESCRIPTION SE(dB) DFT COLOUR SURFACEREF RESISTIVITY

Ohm/Sq.

502 EMI Shield Nickel 50-55 50µm Dark Grey 0.90Plastic Enclosures Acrylic Paint

505 EMI Shield Silver/Copper 60-65 25µm Copper 0.10Plastic Enclosures Acrylic Paint

552 EMI Shield Nickel/Acrylic 50-55 50µm Dark Grey 0.90Plastic Enclosures Prototyping

Aerosol

555 EMI Shield Silver/Copper 60-65 25µm Copper 0.10Plastic Enclosures

ECP 500 SERIES – ELECTRICALLY CONDUCTIVE COATING SELECTOR GUIDE

EMI SHIELDING COATINGSCOMMENTS

Single component Nickel/Acrylic conductivecoatings which provides cost effectiveEMI/RFI Shielding on plastic housing used inthe electronics and computer industries

Supplied ready for use it is designed to give lowresistance, in thin film thickness. Displayingexcellent adhesion to most plastics used in theelectronics and computer industries. It exhibitsexcellent long term EMI/RFI shielding andgrounding properties.

Nickel/Acrylic based aerosol coating combinesEMI/RFI shielding properties with a convenientmethod of application for prototype, design andtouch-up work, it is specially formulated inorder to provide a homogeneous finish

Silver/Copper based aerosol coating combinesEMI/RFI shielding properties with a convenientmethod of application for prototype, design andtouch-up work, it is specially formulated inorder to provide a homogeneous finish

ECP USE DESCRIPTION STATIC DFT COLOUR SURFACEREF DECAY RESISTIVITY

Ohm/Sq.

529 Expanded Water based <2 secs 30µm Light Grey 108

polystyrene, AcrylicHIPS, PC

531 Plastic Carbon <0.1 secs 50µm Black 106

Enclosures Acrylic Paint

534 Metalwork, Polyester <2 secs 60µm Light Grey <109

racking, cabinets powder coating

535 Plastic Coloured <2 secs 50µm Light Grey <109

Enclosures Acrylic Paint

536 Flexible Carbon <0.1 secs 10-15µm Black <106

Substrate Polyurethane paint

537 Oven interiors, High temperature <2 secs 50µm Light Grey 108

flow solder Silicone/acrylicmachines

538 Metalwork, Stoving enamel <2 secs 30µm Light Grey 108

Racking, cabinets

539 Cardboard, PVC, Water based <2 secs 30µm Clear 109

PC, PE Foam clear acrylic

581 Plastic enclosures Black Conductive <0.1 secs 50µm Black 105

Acrylic aerosol

585 Plastic enclosures Coloured <2 secs 50µm Light Grey <109

acrylic aerosol

589 Cardboard, Water based clear <2 secs 30µm Clear <109

PVC PC, PE Foam acrylic pump spray

STATIC DISSIPATIVE COATINGSCOMMENTS

Single pack water based static dissipative paint,ideal for materials that are susceptible todamage by solvents, e.g. expanded polystyrene packaging, HIPS, etc. Will adhereto a variety of substrates, suitable for use inelectronics assembly areas or ATEX typehazardous environments. Complies with BSIEC 61340-5-1:2001

Single component air-drying ConductiveCarbon/Acrylic Coating.Designed for anti-static applications

Durable hard wearing S.D. Powder Coating for metalwork ideal for use in electronicsassembly printing, pharmaceutical and ATEXhazardous environments. Complies with BSIEC 61340-5-1:2001

Single component coloured acrylic S.D. coating which provides effective static controlon plastic housings used in the Electronic andComputer Industries

Conductive Flexible Polyurethane for use inapplications where a highly conductive flexiblesurface is required. P.U. Elastomer, PVC,rubber variants, fabrics, leather

High temperature S.D. finish that can function upto 350 celsius, Suitable for use on flow solderpallets, drying ovens etc. Complies with BS IEC61340-5-1:2001

Durable hard wearing S. D. stoving enamel for metalwork ideal for use in electronicsassembly printing, pharmaceutical and ATEXhazardous environments. Complies with BSIEC 61340-5-1:2001

Provides a clear semi-permanent staticdissipative finish. Can be used to treat clearpackaging, carpets, cardboard etc. Complies with BS IEC 61340-5-1:2001

Provides all the benefits of ECP 535 with aconvenient method of application

Provides all the benefits of ECP 531 with aconvenient method of application

Provides all the benefits of ECP 539 with aconvenient method of application

ECP USE DESCRIPTION STATIC DFT COLOUR SURFACEREF DECAY RESISTIVITY

Ohm/Sq.

525 SD Floor Epoxy Paint for <2 secs 50-70µm Light Grey 109

Coating Floor/Clean Rooms

526 Conductive Water based <2 secs 50-70µm Light Grey 105

Floor Coating Conductive epoxyFloor paint

FLOOR COVERINGSCOMMENTS

High quality water based S. D. two pack epoxysystems. Environmentally friendly, it offers theadvantages of low odour, and easy cleansing ofequipment with water. Exhibits excellentmechanical properties which will withstandabrasion and impact, as well as giving goodresistance to a wide range of chemicalsincluding: Oils, Fats, Solvents, Acids and Alkalis

Two pack water based conductive epoxy floorpaint suitable for use where footwear will bethe primary means of grounding. Complies withBS IEC 61340-5-1:2001. Exhibits excellentmechanical properties that will withstandabrasion and impact, as well as giving goodresistance to a wide range of chemicalsincluding Oils, Fats, Solvents, Acids and Alkalis

ECP 500 SERIES

EMI SHIELDING

Surface coatings offer the simplest solution to many shielding applications and can be

carried out with minimal training and equipment requirements using conventional spray

techniques.

ECP 502/552 Nickel Acrylic Paint, cost effective, also available in aerosol

for prototype and small runs.

ECP 505/555 Silver plated copper acrylic giving high performance shielding,

aesthetically pleasing. Also available in aerosol.

The ECP 500 Range has been developed to provideEMI Shielding and to protect sensitive electrical equipment from

the effects of electro static discharge (ESD).

� PAINT SUPPLY

� COATING OF FREE ISSUE PARTS

� CUSTOM MOULDING AND COATING OF PARTS

Unit 3, Transpennine Trading Estate,Gorrells Way, Rochdale OL11 2PX

Tel. +44 (0)1706 647718Fax. +44 (0)1706 646170

email. info@tbaps.comwww.tbaps.com