Embed Size (px)
JOURNAL OF LOSS PREVENTIONThe International Journal of Chemical and Process Plant Safety
Submissions may be made to any of the Editors below:
EditorP R Amyotte: Department of Process Engineering & Applied Science, Dalhousie University, P.O. Box 1000, 1360 Barrington Street, Halifax,
Nova Scotia, Canada B3J 2X4. Tel: +1 902 494 3976; Fax: +1 902 420 7639; E-mail: [email protected]
Associate Editors A Miyake: Department of Energy and Safety Engineering, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku,
240-8501 Yokohama, Japan, Tel: +81-45-339-3993, Email: [email protected]
G Reniers: Antwerp Research Group on Safety and Security (ARGoSS), Universiteit Antwerpen, Prinsstraat 13, Office Box B-434, 2000 Antwerp, Belgium, Tel: +32-(0)3/220.41.82, Email: [email protected]
Founding Regional EditorS S Grossel: Process Safety & Design, 4 Marble Court, Unit 9, Clifton, NJ 07013-2212.
Tel. & Fax: 973-779-3668; E-mail: [email protected]
SCOPELoss Prevention is concerned with process and plant design; plant layout; hazard analysis, accident and loss; plant commissioning and inspection; plant operation, maintenance and modifications; process control and monitoring; design of protective systems; equipment design and reliability; use of computer systems in loss prevention; operational management and training aspects; accident analysis; emergency planning; transport and offshore; hazards assessment.
Contributions to the journal should be submitted through the Elsevier Editorial System (EES) by visiting: http://ees.elsevier.com/jlp.
© 2013 Elsevier Ltd. All rights reserved.
Printed in the Netherlands
INTERNATIONAL EDITORIAL BOARD
D C Bull: Firebrand International Ltd., The Old Rectory, Plough Lane, Christleton, Chester CH3 7BA, UKP Cardillo: Stazione Sperimentale per i Combustibili, 20097 San Donato, Milan, ItalyJ Casal: ETSEIB, Diagonal 647, 08028 Barcelona, SpainK L Cashdollar: NIOSH-Pittsburgh Research Laboratory, P.O. Box 18070, Cochrans Mill Road, Pittsburgh, PA 15236, USAC B Ching: Dept of Chemical Engineering, National University of Singapore, 10 Kent Ridge Crescent, Singapore 0511K Dixon-Jackson: Ciba Speciality Chemicals, Charter Way, Huddersfield Industrial Estate, Macclesfield, Cheshire, SK10 2NX, UKR K Eckhoff: University of Bergen, Department of Physics, Allegaten 55, N-5007 Bergen, NorwayS A El-Sayed: Mechanical Power Engineering Department, Zagazig University, EgyptFan Weichen: State Key Laboratory of Fire Science, University of Science and Technology of China, Hefei, Antui 230026, ChinaH G Fisher: Principle Consultant, FisherInc., 229 Brookhaven Drive, Nitro, WV 25143, USAL Friedel: Stroemungsmechanik, Technical University of Hamburg–Harburg, D-21071 Hamburg, GermanyV M Fthenakis: Brookhaven National Laboratory, Dept of Applied Science, Upton, NY 11973, USAJ P Gupta: Department of Chemical Engineering, Indian Institute of Technology, Kanpur 20816, UP, IndiaJ L Gustin: RHODIA Recherches et Technologies, Ingeniere et Technologies, CRTL, 85 Avenue des Freres Perret, BP 62, 69192 Saint-Fons cedex, FranceD C Hendershot: 534 Norris Drive, Furlong, PA 18925, USAR W Johnson: Unwin Company, 1920 Northwest Blvd., Ste 201, Columbus, OH 43212, USAF I Khan: Associate Professor, Faculty of Engineering & Applied Science, Memorial University, St. John’s, NL A1B 3X5, CanadaT Kletz: 64 Twining Brook Road, Cheadle Hulme, Cheadle, Cheshire SK8 5RJ, UKH Koseki: Head, Material Safety Group, Fundamental Research Division, National Research Institution of Fire and Disaster, 14-1 Nakahara 3-Chome Mitaka, Tokyo 181-8633, JapanP N Lodal: Eastman Chemical Company, Tennessee Eastman Div, Plant Protection Tech Services, PO Box 511, Building 18, Kingsport, TN 37662, USAD McCutcheon: Industrial Safety and Loss Management Faculty of Engineering, 638 Chemical Materials Engineering Building, University of Alberta T6G 2G6, CanadaH Ohtani: Dept of Safety Engineering; Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama 240-8501, JapanR L Rogers: Inburex GmbH, Wilhelmstrasse 2, D-59067 Hamm, GermanyR F Schwab: Allied Signal Corporation, PO Box 1139R, Morristown, NJ 07960, USAF Stoessel: Swiss Institute for the Promotion of Safety & Security, Head Chemical Process Safety Consulting Klybeckstrasse 141, WKL-32.322, CH-3002, Basal, SwitzerlandE A Ural: President, Loss Prevention in Science and Technologies, Inc., 659 Pearl Street, Stoughton, MA 02072, USAR J Willey: Department of Chemical Engineering, 342 SN Northeastern University, 360 Huntington Ave., Boston, MA 02115-5000, USA
