of 1 /1
EDITORS- I N- CHIEF Imre Horv ´ ath Kunwoo Lee Vadim Shapiro Faculty of Industrial Design Engineering, Department of Mechanical and Mechanical Engineering and Computer Sciences, Delft University of Technology, Production Engineering, University of Wisconsin-Madison, Landbergstraat 15, Seoul National University, 1513 University Avenue, 2628 CE Delft, The Netherlands Seoul 151-742, South Korea Madison, WI 53706, USA EDITORIAL BOARD W.F. Bronsvoort Technische Universiteit Delft Delft, The Netherlands G. Elber Technion - Israel Institute of Technology Haifa, Israel A. Fischer Technion - Israel Institute of Technology Haifa, Israel B.H.M. Gerritsen TNO Netherlands Organisation for Applied Scientific Research Leiden, The Netherlands C.M. Hoffmann Purdue University, West Lafayette IN, USA S.-M. Hu Tsinghua University Beijing, China K.-C. Hui Chinese University of Hong Kong Shatin, N.T., Hong Kong H. Ilies University of Connecticut Storrs, USA G. Jared Cranfield University, Cranfield Bedford, UK T. Ju Washington University in St. Louis St. Louis, MO, USA P.D. Kaklis University of Strathclyde Glasgow, Scotland, UK M.-S. Kim Seoul National University (SNU) Seoul, South Korea T.W. Kim Seoul National University (SNU) Seoul, South Korea L. Komzsik Unigraphics UGS Cypress, CA, USA M.C. Lin University of North Carolina at Chapel Hill Chapel Hill, NC, USA T. Maekawa Yokohama National University, Hodogaya Yokohama, Japan R.R. Martin Cardiff University, Roath Cardiff, UK S. McMains University of California at Berkeley Berkeley, CA, USA X. Qian Illinois Institute of Technology Chicago, IL, USA K. Ramani Purdue University West Lafayette, IN, USA W.C. Regli Drexel University Philadelphia, PA, USA N.S. Sapidis University of Western Macedonia, Kozani, Greece K. Shimada Carnegie Mellon University Pittsburgh, PA, USA H. Shin Korea Institute of Science and Technology (KIST) Yuseong-Gu, Daejeon, South Korea V. Srinivasan National Institute of Standards and Technology (NIST) Gaithersburg, MD, USA H. Suzuki University of Tokyo Meguro-Ku, Japan S.T. Tan The University of Hong Kong Hong Kong, China J. Vandenbrande The Boeing Company Seattle, WA, USA D.J. Walton University of Manitoba Winnipeg, MB, Canada C.L. Wang Chinese University of Hong Kong Hong Kong, China M.Y. Wang Chinese University of Hong Kong Hong Kong, China X. Ye Zhejiang University Hangzhou, China HONORARY EDITORS C.M. Eastman Georgia Institute of Technology, Atlanta, GA, USA J.S. Gero George Mason University, Fairfax, VA, USA N.M. Patrikalakis Massachusetts Institute of Technology (MIT), Cambridge, MA, USA D.F. Rogers United States Naval Academy, Annapolis, MD, USA M.A. Sabin Numerical Geometry Ltd, Lode, Cambridge, UK

Editorial Board

Embed Size (px)

Text of Editorial Board

Page 1: Editorial Board

EDITORS-IN-CHIEF

Imre Horvath Kunwoo Lee Vadim ShapiroFaculty of Industrial Design Engineering, Department of Mechanical and Mechanical Engineering and Computer Sciences,Delft University of Technology, Production Engineering, University of Wisconsin-Madison,Landbergstraat 15, Seoul National University, 1513 University Avenue,2628 CE Delft, The Netherlands Seoul 151-742, South Korea Madison, WI 53706, USA

EDITORIAL BOARD

W.F. BronsvoortTechnische Universiteit DelftDelft, The Netherlands

G. ElberTechnion - Israel Institute of TechnologyHaifa, Israel

A. FischerTechnion - Israel Institute of TechnologyHaifa, Israel

B.H.M. GerritsenTNO Netherlands Organisation for

Applied Scientific ResearchLeiden, The Netherlands

C.M. HoffmannPurdue University, West LafayetteIN, USA

S.-M. HuTsinghua UniversityBeijing, China

K.-C. HuiChinese University of Hong KongShatin, N.T., Hong Kong

H. IliesUniversity of ConnecticutStorrs, USA

G. JaredCranfield University, CranfieldBedford, UK

T. JuWashington University in St. LouisSt. Louis, MO, USA

P.D. KaklisUniversity of StrathclydeGlasgow, Scotland, UK

M.-S. KimSeoul National University (SNU)Seoul, South Korea

T.W. KimSeoul National University (SNU)Seoul, South Korea

L. KomzsikUnigraphics UGSCypress, CA, USA

M.C. LinUniversity of North Carolina at Chapel HillChapel Hill, NC, USA

T. MaekawaYokohama National University, HodogayaYokohama, Japan

R.R. MartinCardiff University, RoathCardiff, UK

S. McMainsUniversity of California at BerkeleyBerkeley, CA, USA

X. QianIllinois Institute of TechnologyChicago, IL, USA

K. RamaniPurdue UniversityWest Lafayette, IN, USA

W.C. RegliDrexel UniversityPhiladelphia, PA, USA

N.S. SapidisUniversity of Western Macedonia,Kozani, Greece

K. ShimadaCarnegie Mellon UniversityPittsburgh, PA, USA

H. ShinKorea Institute of Science and Technology (KIST)Yuseong-Gu, Daejeon, South Korea

V. SrinivasanNational Institute of Standards and Technology (NIST)Gaithersburg, MD, USA

H. SuzukiUniversity of TokyoMeguro-Ku, Japan

S.T. TanThe University of Hong KongHong Kong, China

J. VandenbrandeThe Boeing CompanySeattle, WA, USA

D.J. WaltonUniversity of ManitobaWinnipeg, MB, Canada

C.L. WangChinese University of Hong KongHong Kong, China

M.Y. WangChinese University of Hong KongHong Kong, China

X. YeZhejiang UniversityHangzhou, China

HONORARY EDITORS

C.M. EastmanGeorgia Institute of Technology,Atlanta, GA, USA

J.S. GeroGeorge Mason University,Fairfax, VA, USA

N.M. PatrikalakisMassachusetts Institute of Technology (MIT),Cambridge, MA, USA

D.F. RogersUnited States Naval Academy,Annapolis, MD, USA

M.A. SabinNumerical Geometry Ltd, Lode,Cambridge, UK