Edat Steel Works Div

8/12/2019 Edat Steel Works Div.

1/14

Structural Steel works Div.

EDAT INDUSTRIAL SOLUT


2/14

EPC CONTRACTOR

DESIGN, ENGINEERING & PROCUREMENT FABRICATION, PAINERECTIO


3/14

GENERAL INFORMATION

EDAT has as engineering execution and technical

expertise in the fabrication & erection of all kinds of

Steel structures.

EDAT undertakes the erection of piping, and structural

work in main plant building, bunker bay and

miscellaneous structures.

EDAT has steel fabrication capacity and specializes in

building steel structures for thermal power plants. The

company takes up civil works for power plants of up to

500 MW. EDAT undertakes manufacture, supply, and

commissioning of super-heater Eco, reheater coils

and equipment for thermal power stations.


4/14

DESIGN & ENGINEERING

Recognizing the customer requirementfor a one stop solution, we offer the

complete Design and Build package for

steelwork. Our design capability draws

on the expertise of structural

steel Engineers who each have 8 years

of experience in the trade. Couple that

with the 10 years service of ourConstruction team.


5/14

DESIGN & ENGINEERING

EDAT can meet, and often exceed, our clients

requirements, utilizing the wealth of

experience available from key personnel. We

offer a complete service, from Design,

Fabrication, through to Installation within the

Structural Steel Industry. In addition to the

structural steel service EDAT. have the in-house ability to undertake cladding design,

supply and installation packages as required.


6/14

PROCUREMENT

Procurement of steel material as perthe specification and standards

mentioned.

Procurement from certified suppliers.

Obtain the complete test certificates

& Mill certificates with the certificate

of origin. The material supplied must be in

accordance to IS 8910.


7/14

FABRICATION & PAINTING As the material is inspected and

approved by the Quality ControlDept. and the fabrication drawingsare approved by the client, thefabrication team start its process.

Complete fabrication is done inaccordance with the relevantstandards, the project specifications

and approved drawings. Periodically the QC will be checking

the fabrication works

After the completion of the fabricationworks, the member is sent forcleaning and blasting (if required).

After the member is clea

from all the debris and c

welding points are inspe

Then the member is sen

per the required specific

requirement.

Special type of paints an

procedure is followed forstructure, Oil & Gas plan

Plants etc

As per the requirement t

fire proofed by painting I

Paints and cementitious


8/14

FABRICATION & PAINTING


9/14

ERECTION1. After the complete fabrication

is done in the workshop, afterthe cleaning and painting isdone the members are thentransported to site on trailers.

2. On arrival of the completemembers on site the erectionteam and the site QC inspectorcheck the material on the basisof the project specification andthe approved drawings forconstruction.

3. Then daily erection aplaned and the erectstructure begins withcranes.

4. Erection of a structurqualified erectors an

5. The site engineer ansupervisor ensures a

and all the required ttools are on site for t

6. A site safety officer aalways present on siinspections and audi


10/14

ERECTION


11/14

ORGANIZATION CHART

BOD

GM DESIGN &

DEVELOPME

NT

DESIGN

ENGINEERS

CAD

OPERATORS/

DRAFTMAN

GM

PROJECTS &

PRODUCTION

PROJECT

MANAGER

PROJECT

ENGINEER

PRODUCTION

ENGINEER

WORKSHOP

SUPERVISOR

FABRICATORS

WELDERS TACK WELDERS HELPERS

SITE ENGINEER

SITE

SUPERVISOR

SITE FOREMAN

ERRECTORSSEMI SKILLED

HELPERS


12/14

LIST OF EQUIPMENT

N0.T LIST OF MACHINES/EQUIPMENT N0.T LIST OF MACHINES/E

1 BAND SAWING MACHINE KBS 1301 DG 15 AIR DRYER

2 HYDRAULIC BENDING MACHINE 6mm THICK 16 DRILL AND END MILL GRINDING

3 HYDRAULIC SHEARING MACHINE FOR 16mm THICK 17 UNIVERSAL IRON WORKER

4 SIX WHEEL AUTOMATIC SHOT BLASTING MACHINE 18 RADIAL DRILL

5 INFEED AND OUT FEED CONVEYORS FOR 18mm EACH 19 CUT OFF MACHINE

6 9000 CFM DUST COLLECTOR FOR BLASTING MACHINE 20 PIPE BENDER WITH DIE

7 AIRLESS SPRAY PAINTING SYSTEM 21 FORK LIFT 5 TONNER8 WELDING MACHINE 600 Amp FCAW 22 PORTABLE AUTOMATIC GAS CU

9 WELDING MACHINE SMAW 23 PLASMA CUTTING MACHINE

10 WELDING MACHINE 400 Amp FCAW 24 FORKLIFT 3 TONS

11 OVERHEAD CRANE 10 MT CAPACITY

12 SEMI GANTRY CRANE 10 MT CAPACITY

13 AIR COMPRESSOR 7.5 HP

14 AIR STORAGE TANK


13/14

LIST OF MANPOWERSr.n. LIST OF MAPOWER Nos.

1 General Manager Design & Development 1

2 General Manager Projects & Production 1

3 Projects Managers 2

4 Project Engineers 2

5 Design Engineers 2

6 Site Engineers 4

7 CAD Operators/ Draftman 4

8 Site Supervisors 49 Site Foremans 4

10 Production Engineer 1

11 Workshop Supervisors 2

12 Fabricators 6

13 Welders 6

14 Tack Welders 2

15 Errectors 15

16 Helpers 25


14/14

HSE All the staff and workers have to comply

with the safety rules and regulations of thecompany.

No person is allowed on site without thePPE (Personal Protective Equipments)

The PPE general requirement is asfollows,

Safety shoes (i.e., with steel toe)

Safety helmet,

Hand gloves (normal)

Leather hand gloves for the erection teamand welders.

Safety Glasses.

Dust mask.

Work safe - live

Safety Pol

Documents

Edat Steel Works Div