Upload
vamsikrishna-reddy
View
82.067
Download
16
Tags:
Embed Size (px)
DESCRIPTION
it describes the controlled drug release by diffusion or dissolution or both or swelling or erosion and which kinetics it follows either zero,first , higuchi or peppas
Citation preview
1
Submitted by B.VamsikrishnaReddyM.Pharm first year, Pharmaceutics,MCOPS, Manipal.
Phone:+91-9008418512 [email protected]
2
DRUG DELIVERY SYSTEM :-
Drug delivery System will deliver the drug at a rate determined by the needs of the body over a specified period of time.
CONTROLLED RELEASE SYSTEM :-
Control release is helpful for maintaining constant drug levels in the target tissues or cells.
3
TYPES OF CONTROLLED DRUG RELEASE SYSTEMS:-
1) Dissolution controlled systemsa) Encapsulation dissolution controlled system.b) Matrix dissolution controlled systems.
2)Diffusion controlled systems a) Reservoir controlled systems. b) Matrix controlled systems.
3)Dissolution and diffusion controlled release systems
4
4)Water penetration controlled systems
a) Swelling controlled systems
b) Osmotically controlled systems.
5) Chemically controlled release systems
a) erodible systems
b) drug covalently linked with polymer
6) Hydro gels
7) Ion - exchange resin controlled release systems
5
DISSOLUTION CONTROLLED SYSTEMS
In dissolution controlled systems, the rate controlling step is dissolution. the drug is embedment in slowly dissolving or erodible matrix or by coating with slowly dissolving substances.
It is of two types and they areEncapsulation dissolution controlled systemMatrix dissolution controlled system
6
ENCAPSULATION DISSOLUTION CONTROLLED SYSTEMS :-
The drug particles are coated or
encapsulated by microencapsulation techniques with
slowly dissolving materials like cellulose, poly
ethylene glycols, polymethacrylates, waxes etc. the
dissolution rate of coat depends upon the solubility
and thickness of the coating.
7
MATRIX DISSOLUTION CONTROLLED SYSTEMS :-
Matrix systems are also called as monoliths since the drug is homogeneously dispersed throughout a rate controlling medium.
They employ waxes such as beeswax, carnauba wax, hydrogenated castor oil etc which control drug dissolution by controlling the rate of dissolution fluid penetration into the matrix by altering the porosity of rate.
The wax embedded drug is generally prepared by dispersing the drug in molten wax and congealing and granulating the same.
8
9
DIFFUSION CONTROLLED RELEASE SYSTEMS:-
Diffusion systems are characterized by release rate of drug is dependant on its diffusion through inert water insoluble membrane barrier.
There are basically two types of diffusion devices.
a) Reservoir diffusion system
b) Matrix diffusion system
10
Reservoir diffusion system
11
MATRIX DIFFUSION SYSTEMS
12
DISSOLUTION AND DIFFUSION CONTROLLED RELEASE SYSTEMS
The drug core is encased in a partially soluble membrane. Pores are thus created due to dissolution of parts of the membrane whichPermit entry of aqueous medium into the core and
hence drug dissolution occursAllow diffusion of dissolved drug out of the
system.
An example of obtaining such a coating is using a mixture of ethyl cellulose with poly vinyl pyrrolidiene or methyl cellulose.
13
Water Penetration Controlled Systems
In water penetration controlled delivery systems, rate control is obtained by the penetration of water into the system. They are
Swelling Controlled Systems:-Swelling controlled release systems are initially
dry and when placed in the body absorb water or other body fluids and swell. Swelling increases the aqueous solvent content within the formulation as well as the polymer mesh size, enabling the drug to diffuse through the swollen network into the external environment
14
“a” indicates reservoir diffusion swelling.“b” indicates matrix diffusion swelling.
15
OSMOTICALLY CONTROLLED RELEASE SYSTEMS
These systems are fabricated by encapsulating an osmotic drug core containing an osmotically active drug (or a combination of an osmotically inactive drug with an osmotically active salt eg NaCl) within a semi permeable membrane made from biocompatible polymer, e.g. cellulose acetate.
A gradient of osmotic pressure is they created, under which the drug solutes are continuously pumped out over a prolonged period of time through the delivery orifice.
16
This type of drug system dispenses drug solutes continuously at a zero order rate.
17
CHEMICALLY CONTROLLED RELEASE SYSTEMS
Chemically controlled release systems are the systems that change their chemical structure, when exposed to biological fluid.
Mostly, biodegradable polymers are designed to degrade as a result of hydrolysis of the polymer chains into biologically safe and progressively smaller moieties.It is of two types and they are
Erodible systemsPendent chain system
18
ERODIBLE SYSTEMSIn erodible systems, the mechanism of drug
release occurs by erosion. Erosion may be two types and they are
a) Bulk erosion process b) Surface erosion process
Bulk erosion:-polymer degradation may occur through bulk hydrolysis.Surface erosion:-Polymers like polyorthoesters and polyanhydrides etc occurs degradation only at the surface of the polymer, resulting in a release rate that is proportional to the surface area of the delivery system.
19
“a” indicates bulk erosion “b” indicates surface erosion
20
PENDENT CHAIN SYSTEM
Pendent chain systems consists of linear homo or copolymers with the drug attached to the backbone chains.
The drug is released from the polymer by hydrolysis or enzymatic degradation of the linkages.
Zero order can be obtained and the cleavage of the drug is the rate controlling mechanism.
Example for polymers used in pendent chain systems like n-(2-hydroxy propyl)methacrylamide etc.
21
HYDROGELSHydrogels are water swollen three dimensional
structures composed of primarily hydrophilic polymers.
• They are rendered insoluble because of chemical or physical cross-links. the physical cross-links include crystallites, entanglements or weak associations like hydrogen bonds or vander waals forces. these cross-links provide the physical integrity and network structure.
• Hydrogels provide desirable protection of labile drugs, peptides and proteins.
22
Because of their nature , hydrogels can be used in many different types of controlled release systems. These systems are classified according to the mechanism controlling the release of the drug from the device. They are classified as follows
a) Diffusion controlled systems
b) Swelling-controlled systems
c) Chemically controlled systems
d) Environmentally responsive systems
23
Example for environmentally responsive systems
24
.
ION-EXCHANGE RESINS CONTROLLED RELEASE SYSTEMS
This systems are designed to provide the controlled release of an ionic (or ionizable) drug .
It is prepared by first absorbing an ionized drug onto the ion-exchange resin granules such as codeine base with Amberlite , and then after filtration from the alcoholic medium, coating the drug resin complex granules with a water permeable polymer, e.g. a modified copolymer of polyacrylic and methacrylic ester, and then spray drying the coated granules to produce the polymer coated drug resin preparation.
25
CATIONIC DRUGSA cationic drug forms a complex with an anionic ion-
exchange resin e.g. a resin with a SO3- group .
In the G.I tract Hydronium ion (H+) in the gastrointestinal fluid penetrates the system and activity the release of cationic drug from the drug resin complex.
H+ + Resin – SO3- Drug+ Resin – SO3
- H+ +Drug+.
26
ANIONIC DRUGS
An anionic drug forms a complex with a cationic ion exchange resin, e.g. a resin with a [N (CH3)3
+] group. In the GI tract , the Chloride ion (Cl-) in the gastrointestinal fluid penetrates the system and activates the release of anionic drug from the drug resin complex.
Cl- + Resin –[N (CH3)3+] Drug-
Resin –[NCH3)3+]Cl- + Drug-
27
RELEASE KINETICSThe mathematical models are used to evaluate the kinetics
and mechanism of drug release from the tablets.
The model that best fits the release data is selected based on the correlation coefficient (r) value in various models.
The model that gives high ‘r’ value is considered as the best fit of the release data.
28
Mathematical models are
1)Zero order release model
2)First order release model
3)Hixson-crowell release model
4)Higuchi release model
5)Korsmeyer – peppas release model
29
ZERO ORDER RELEASE EQUATION
The equation for zero order release is
Qt = Q0 + K0 t
where
Q0 = initial amount of drug
Qt = cumulative amount of drug release at time “t”
K0 = zero order release constant
t = time in hoursIt describes the systems where the drug release rate is
independent of its concentration of the dissolved substance.
30
A graph is plotted between the time taken on x-axis and the cumulative percentage of drug release on y-axis and it gives a straight line.
31
FIRST ORDER RELEASE EQUATION The first order release equation is
Log Qt = Log Q0+ Kt /2.303
where
Q0 = initial amount of drug
Qt = cumulative amount of drug release at time “t”
K = first order release constant
t = time in hours
Here, the drug release rate depends on its concentration
32
A graph is plotted between the time taken on x-axis and the log cumulative percentage of drug remaining to be released on y-axis and it gives a straight line.
33
HIXSON - CROWELL RELEASE EQUATION The Hixson - Crowell release equation is
Where
Q0 = Initial amount of drug
Qt = Cumulative amount of drug release at time “t”
KHC = Hixson crowell release constant
t = Time in hours.It describes the drug releases by dissolution and with the
changes in surface area and diameter of the particles or tablets
34
A linear plot of the cube root of the initial concentration minus the cube root of percent remaining versus time in hours for the dissolution data in accordance with the Hixson-crowell equation.
35
HIGUCHI RELEASE EQUATION
The Higuchi release equation is
Q=KHt1/2
where
Q = cumulative amount of drug release at time “t”
KH = Higuchi constant
t = time in hoursThe Higuchi equation suggests that the drug release by
diffusion.A graph is plotted between the square root of time taken on
x-axis and the cummulative percentage of drug release on y-axis and it gives a straight line.
36
37
KORSMEYER-PEPPAS EQUATIONKorsmeyer – peppas equation is
F = (Mt /M ) = Kmtn
Where
F = Fraction of drug released at time ‘t’
Mt = Amount of drug released at time ‘t’
M = Total amount of drug in dosage form
Km = Kinetic constant
n = Diffusion or release exponent
t = Time in hours
38
‘n’ is estimated from linear regression of log ( Mt/M ) versus log t
If n = 0.45 indicates fickian diffusion0.45<n<0.89 indicates anomalous diffusion or non-
fickian diffusion.If n = 0.89 and above indicates case-2 relaxation or super
case transport-2. Anomalous diffusion or non-fickian diffusion refers to
combination of both diffusion and erosion controlled rate release.
Case-2 relaxation or super case transport-2 refers to the erosion of the polymeric chain.
39
A graph is plotted between the log time taken on x-axis and the log cummulative percentage of drug release on y-axis and it gives a straight line.
40
ARTICLE REVIEW
Formulation, and Evaluation of Pentoxifylline-Loaded Poly(ἑ-caprolactone) Microspheres :-
41
42
ZERO ORDER RELEASE
43
FIRST ORDER RELEASE
44
HIGUCHI MODEL
45
The in vitro release data were applied to various kinetics models to predict the drug release mechanism and kinetics. The drug release mechanism from the microspheres was diffusion controlled as plots of the amount released versus square root of time was found to be linear.
The correlation coefficient(r2)was in the range of 0.978 0.987 for various formulations.
When log percentage of drug remaining to be released vs. time was plotted in accordance with first order equation, straight lines were obtained (r2>0.95) indicated that drug release followed first order kinetics.
46
REFERENCES
Chein YW. Novel drug delivery systems. 2nded,pg:139-30Brahmankar. Biopharmaceutics and pharmacokinetics . 5thed, pg:
350-25Edith Mathiowitz. Encyclopedia of controlled drug delivery.
1sted, Vol.II, pg: 698-29.Wise DL. Hand book of pharmaceutical controlled release
technology. 1sted, pg: 183-24.Tamizharasi S, Rathi JC, Rathi V. Formulation and evaluation of
Pentoxifylline-loaded Poly(ἑ-caprolactone) microspheres . Ind J of Pharm Sci, 2008may; 70(3):333-5.
47
THANK YOU