Drifting Sandvik

  • View
    116

  • Download
    11

Embed Size (px)

Text of Drifting Sandvik

  • Drifting and tunneling tools

  • Drifting and tunneling

    Page

    Drifter tools, 25 mm bit thread ....................................... 39

    Drifter tools, 250 bit thread .......................................... 41

    Drifter tools, 28 mm bit thread ....................................... 42

    Drifter tools, 32 mm bit thread ....................................... 44

    Drifter tools, 330 bit thread .......................................... 47

    Drifter tools, 35 mm bit thread, Sandvik Jumbo ............. 49

    Drifter extension tools, Sandvik Extra ............................ 51

    Sandvik CAPP standard bits .......................................... 52

    Excalibur rock bolts ........................................................ 53

    CO

    NT

    ENT

    S

  • 39

    2-1_

    407

    Drifting and tunnelingR25 (1") bit thread

    Button bit, CAPP 52

    Flushinghole, mm Buttons, mm Dimensions Bit Part No. Front Gauge Front Gauge D classi- No Size No Size No Size No Size Angle mm in cation

    1x5 1x6 2x7 5x8 35 35 1 3/8" HMCA 7732-5235-S451x5 1x6 2x7 5x9 30 38 1 1/2" HMCA 7732-5238-S451x5 1x6 2x8 5x9 35 41 1 5/8 HMCA 7732-5241-S452-1

    _384

    D

    Cross bit, Heavy Duty1x5 2x5 35 1 3/8" 7732-1435-421x5 2x5 38 1 1/2" 7732-1438-421x5 2x5 41 1 5/8 7732-1441-422

    -1_4

    D

    Button bit, CAPP 52 for Excalibur 120+1x5 1x6 2x7 5x9 30 37 1 29/64" HMCV 7732-5237-S45

    Shank adapter Drifter rodCross bit

    Shank rodButton bit

    Reaming equipment

    Coupling sleeve

    LD

    2-1_336

    R28 R25

    Drifter rod, R28 - Hex 28 - R25

    Dimensions Part No.L Dmm ft in mm in

    3090 10' 1 21/32" 28 1 1/8" 7859-7731-20

    Flushing hole 9.1 mm.

    L

    2-1_337

    R25DR32

    Drifter rod, R32 - Hex 25 - R252475 8' 1 21/32" 25 1" 7853-6224-20 3090 10' 1 21/32" 25 1" 7853-6231-20

    Flushing hole 8.8 mm.

    159

    2-1_188

    R 25L

    25D

    Shank rod, Hex 25 - R253240 10' 7 1/2" 25 1" 7802-7532-20

    Packing 795-1811

    Flushing hole 8.8 mm. For ushing tube 8 mm.

    2-1_384

    D

  • 40

    Drifting and tunneling R25 (1") bit thread

    Shank adapter See page 87

    150 5 29/32" 44 1 47/64" 7993-3644150 5 29/32" 40 1 37/64" 7999-3640

    L

    2-1_17

    D

    Coupling sleeve

    Dimensions Part No.L Dmm ft in mm in

    ThreadR32R28

    Reaming equipment for cut holes / Pilot adapter, 6 taper 26 1 1/32" 7822-2526

    2-1_116

    D

    ThreadR25

    4x8 8x9 25 64 2 1/2" 7722-4864-S454x10 8x10 30 76 3" 7722-4876-S454x10 8x10 30 89 3 1/2" 7722-4889-S45

    2-1_

    110

    D

    Reaming equipment for cut holes / Reaming bit, 6 taper

    Dimensions Part No.Buttons, mm DFront Gauge Angle mm in

  • 41

    Drifting and tunnelingSandvik Alpha. 250 bit thread

    2-1_

    407b

    Button bit, CAPP 52

    Flushinghole, mm Buttons, mm Dimensions Bit Part No. Front Gauge Front Gauge D classi- No Size No Size No Size No Size Angle mm in cation

    1x4,5 1x6 2x7 5x7 45 33 1 5/16" HMCA 7764-4433-S451x5 1x6 2x7 5x8 35 35 1 3/8" HMCA 7764-5235-S451x5 1x6 2x7 5x9 30 37 1 29/64" HMCA 7764-5237-S451x6 1x6 2x7 5x9 35 38 1 1/2" HMCA 7764-5238-S451x6 1x6 2x8 5x9 35 41 1 5/8 HMCA 7764-5241-S45

    2-1_

    384

    D

    Cross bit1x5 2x5 33 1 5/16" 7764-1633-421x5 2x5 35 1 3/8" 7764-1435-421x5 2x5 38 1 1/2" 7764-1438-421x5 2x5 41 1 5/8 7764-1441-42

    2-1_

    4

    D

    Shank adapter Drifter rod

    Cross bit

    Button bit

    Reaming equipment

    Coupling sleeve

    Dimensions Part No.L Dmm ft in mm in

    L

    2-1_

    337b

    DR32 250

    Drifter rod, R32 - Hex 25 - 2502475 8' 1 7/16" 25 1" 7853-1724-202630 8' 7 9/16" 25 1" 7853-1726-202935 9' 7 9/16" 25 1" 7853-1729-203190 10' 5 19/32" 25 1" 7853-1731-20

    Flushing hole 8.6 mm.

    150 5 29/32" 44 1 47/64" 7993-3644

    L

    2-1_17

    D

    Coupling sleeveThread

    R32

    Reaming equipment for cut holes / Pilot adapter, 6 taper

    26 1 1/32" 7822-2726

    2-1_116

    DThread 250

    4x8 8x9 25 64 2 1/2" 7722-4864-S454x10 8x10 30 76 3" 7722-4876-S454x10 8x10 30 89 3 1/2" 7722-4889-S45

    2-1_

    110

    D

    Reaming equipment for cut holes / Reaming bit, 6 taper

    Dimensions Part No.Buttons, mm DFront Gauge Angle mm in

  • 42

    Drifting and tunnelingR28 (1 1/8") bit thread

    Button bit, CAPP 52

    Flushinghole, mm Buttons, mm Dimensions Bit Part No. Front Gauge Front Gauge D classi- No Size No Size No Size No Size Angle mm in cation

    1x5 1x6 2x7 5x9 35 38 1 1/2" MSCFAN 7739-5238-R451x5 1x6 2x7 5x9 30 38 1 1/2" HMCA 7739-5238-S451x5 1x6 2x8 5x9 35 41 1 5/8" HMCA 7739-5241-S451x5 1x6 2x8 5x10 35 43 1 11/16" HMCA 7739-5243-S45

    2-1_384

    D

    Cross bit, Heavy Duty

    2-1_

    4

    D

    1x5 2x5 38 1 1/2" 7739-1438-421x5 2x5 41 1 5/8" 7739-1441-42

    2-1_

    408

    Cross bit

    Button bit

    Reaming equipment

    Coupling sleeve Drifter rodShank adapter

    3090 10' 1 21/32" 32 1 1/4" 7853-8731-20

    LR32 2

    -1_338

    R28D

    Drifter rod, R32 - Hex 32 - R28

    Dimensions Part No.L Dmm ft in mm in

    Flushing hole 9.7 mm.

    Drifter rod, R38 - Hex 32 - R28

    2-1_383

    R28L

    R38 D

    3090 10' 1 21/32" 32 1 1/4" 7854-8731-203700 12' 1 1/2" 32 1 1/4" 7854-8737-204305 14' 1 31/64" 32 1 1/4" 7854-8743-20

    Flushing hole 9.7 mm.

    Drifter rod, R32 - Hex 28 - R28

    L

    2-1_339

    R28R32 D

    3090 10' 1 21/32" 28 1 1/8" 7853-7631-203700 12' 1 1/2" 28 1 1/8" 7853-7637-204005 13' 1 43/64" 28 1 1/8" 7853-7640-204305 14' 1 31/64" 28 1 1/8" 7853-7643-20

    Flushing hole 9.1 mm.

  • 43

    Drifting and tunnelingR28 (1 1/8") bit thread

    Drifter rod, R38 - Hex 28 - R283700 12' 1 1/2" 28 1 1/8" 7854-7637-204305 14' 1 31/64" 28 1 1/8" 7854-7643-20

    2-1_340

    R28L

    R38 D

    Dimensions Part No.L Dmm ft in mm in

    Flushing hole 9.1 mm.

    Coupling sleeve

    150 5 29/64" 44 1 47/64" 7993-3644170 6 11/16" 55 2 5/32" 7994-3655

    L

    2-1_17

    D

    ThreadR32R38

    2-1_116

    D

    Reaming equipment for cut holes / Pilot adapter, 6 taper 26 1 1/32" 7822-1526Thread

    R28

    Reaming equipment for cut holes / Reaming bit, 6 taper

    2-1_

    110

    D

    Dimensions Part No.Buttons, mm DFront Gauge Angle mm in

    4x8 8x9 25 64 2 1/2" 7722-4864-S454x10 8x10 30 76 3" 7722-4876-S454x10 8x10 30 89 3 1/2" 7722-4889-S45

    Reaming equipment for cut holes / Reaming bit, 12 taper

    2-1_118

    D

    4x10 8x12 35 89 3 1/2" 7721-4889-S45

    Shank adapter See page 87

    Reaming equipment for cut holes / Pilot adapter, 12 taper

    2-1_117

    D 35 1 3/8" 7821-1435

    ThreadR28

  • 44

    Drifting and tunnelingR32 (1 1/4") bit thread

    Button bit, CAPP 52

    Flushinghole, mm Buttons, mm Dimensions Bit Part No. Front Gauge Front Gauge D classi- No Size No Size No Size No Size Angle mm in cation

    1x5 1x7.5 2x9 5x10 35 43 1 11/16" HMCA 7733-5243-S451x5 1x7.5 2x9 5x11 30 45 1 3/4" HMCA 7733-5245-S451x5 1x7.5 2x9 5x11 30 45 1 3/4" HMCV 7733-5245-S651x6 1x7.5 2x9 5x11 35 48 1 7/8" HMCA 7733-5248-S451x6 1x7.5 2x10 5x12 35 51 2" HMCA 7733-5251-S451x6 1x7.5 2x10 5x12 35 51 2" HMCV 7733-5251-S65

    2-1_386

    D

    Button bit, CAPP 533x4.5 3x8 6x10 25 45 1 3/4" MCFAN 7733-5345-S453x4.5 3x8 6x10 30 45 1 3/4" MSCFAN 7733-5345-R453x5 3x9 6x10 30 48 1 7/8" MCFAN 7733-5348-S453x6 3x9 6x10 35 51 2" MCFAN 7733-5351-S453x6 3x9 6x10 35 51 2" MSCFAN 7733-5351-R453x6 3x10 6x11 35 57 2 1/4" MCFAN 7733-5357C-S45

    2-1_316

    D

    Button bit, CAPP 542x6 2x9 6x9 40 43 1 11/16" SCFAN 7733-5443-R452x6 2x9 6x10 35 45 1 3/4" SCFAN 7733-5445-R452x7 2x9 6x10 40 48 1 7/8" SCFAN 7733-5448-R452x7 2x10 6x10 40 51 2" SCFAN 7733-5451-R45

    2-1_294

    D

    Cross bit, Heavy Duty1x5 2x6 43 1 11/16" 7733-1343-421x5 4x6 45 1 3/4" 7733-1345A-421x5 2x7.5 48 1 7/8" 7733-1448-421x5 2x7.5 51 2" 7733-1451-42

    2-1_

    24

    D

    MF-rod

    Reaming equipment

    Shank adapterCoupling sleeve Drifter rod

    Button bit

    Cross bit

    Cross bit, Normal1x5 2x6 41 1 5/8" 7733-1041-421x5 2x7.5 51 2 1/4" 7733-1057-42

    2-1_23 D

  • 45

    Drifting and tunnelingR32 (1 1/4") bit Thread

    Drifter rod, R38 - Hex 35 - R32

    Dimensions Part No.L Dmm ft in mm in

    3090 10' 1 21/32" 35 1 3/8" 7854-9631-203700 12' 1 1/2" 35 1 3/8" 7854-9637-204305 14' 1 31/64" 35 1 3/8" 7854-9643-204915 16' 1 1/2" 35 1 3/8" 7854-9649-205525 18' 1 33/64" 35 1 3/8" 7854-9655-20

    LR32R38

    2-1_342

    D

    Flushing hole 9.5 mm.

    Drifter rod, R38 - Hex 32 - R323700 12' 1 1/2" 32 1 1/4" 7854-8637-204305 14' 1 31/64" 32 1 1/4" 7854-8643-204915 16' 1 1/2" 32 1 1/4" 7854-8649-20

    Flushing hole 9.7 mm.

    MF-rod, T38 - Hex 35 - R323700 12' 1 1/2" 35 1 3/8" 7324-6537-204305 14' 1 31/64" 35 1 3/8" 7324-6543-204915 16' 1 1/2" 35 1 3/8" 7324-6549-205525 18' 1 33/64" 35 1 3/8" 7324-6555-20R 32

    LT 38

    2-1_301

    D

    Flushing hole 9.7 mm.Female end OD 56 mm.

    Drifter rod, T38 - Hex 35 - R323700 12' 1 1/2" 35 1 3/8" 7324-9637-204305 14' 1 31/64" 35 1 3/8" 7324-9643-204915 16' 1 1/2" 35 1 3/8" 7324-9649-205525 18' 1 33/64" 35 1 3/8" 7324-9655-206135 20' 1 1/2" 35 1 3/8" 7324-9661-20

    2-1_344

    LR32T38 D

    Flushing hole 9.7 mm.

    Coupling sleeve

    L

    2-1_