32
Catalogue 2009 Domae: the right solution for every home Household Switchboards

Domae Catalogue Jordan and Iraq

Embed Size (px)

Citation preview

Page 1: Domae Catalogue Jordan and Iraq

Catalogue

2009

Domae:the right solution for everyhomeHouseholdSwitchboards

Page 2: Domae Catalogue Jordan and Iraq
Page 3: Domae Catalogue Jordan and Iraq

Contents

A Manufacturer’s Know-how...Guaranteed Quality

A Comprehensive Range...Adapted Solutions

ProtectionCircuit-Breakers Residual Current Circuit-Breakers Surge Arresters

Control - Indication and Time ManagementSwitches TL Impulse RelaysCT Contactors SO Bells, RO BuzzersV Indicator Light MIN TimersIH, IHP Time Switches

ConnectionComb Busbars

Modular EnclosuresDisbo Extra Single Phase Disbo Extra Three PhaseDisbo-Extra DIN Rail Mounting SystemMini Pragma and Accessories

Technical Info

p.4

p.6

p.8

p.11

p.18

p.19

p.28

Page 4: Domae Catalogue Jordan and Iraq

4

DomaeA Manufacturer’s Know-how...

Schneider Electric guarantees conformity of Domae products to European and international standards for construction of equipment intended for domestic and similar installations:

> EN 60898 - IEC 60898:“Overcurrent protection circuit-breakers”. > EN 61008 - IEC 61008:“Automatic residual current circuit-breakers”.

> EN 61095 - IEC 61095:“Electromechanical contactors”.

> EN 61669 -2 -2 - IEC 61669 -2 -2:“Electromagnetic remote control switches (impulse relays)” a specific specification taken from the “Fixed installation switch” standard.

> IEC 61643 -1:“Overvoltage protection devices connectedto LV distribution networks”.

> IEC 60670:“General rules concerning switchgear enclosures for fixed electrical installations for household or similar use”.

Conform to European and internationalstandards

Standard EN 60364 - IEC 60364“Electrical installation in buildings” defines switchgear installation rules.

The installation diagrams and recommendations proposed in this guide conform to this standard.

Install accordingto proper practices

Benefiting from the international experience of the 26 Schneider Electric modular switchgear development and production plants, the Domae switchgear are all produced in ISO 9001/ 2000 certified plants.

Fom design through to dispatch, ISO certification guarantees professional organisation and consistent quality of products.

For Domae, ISO 9001/ 2000 certified production plants

Safety of people and equipment is top on the list of priorities for electrical installation professionals who must demand products designed and produced by a manufacturer, guaranteeing:• compliance with electrical switchgear manufacturing standards,• a high performance industrial process, producing quality switchgear completewith their quality certificates.

Page 5: Domae Catalogue Jordan and Iraq

5

Guaranteed Quality

Schneider Electric guarantees that all Domae switchgear will have the Anenor quality mark.This approval was awarded on completion of tests performed in an approved laboratory in the presence of independent third parties. This third-party organisation monitors conformity to the quality mark by means of new tests conducted after random sampling.

Domae : Aenor approved The quality marks prove product conformity to their reference standard. They guarantee:• safety of installers,• suitability of products for their use.

CE markingAn administrative formality for free movement and sales on the European Union territory.Made compulsory by European directives, CE marking of Domae products satisfies both administrative and legal requirements: intended for European supervisory authorities (customs), the “CE marking” declarations and files are prepared under the manufacturer’s sole responsibility and undergo no conformity checking by a third-party organisation.Only the quality marks, issued and checked by an independent third-party organisation, provide complete guarantee of operation, compatibility and safety according to national and international standards.

For electrocution protection:Domae residual current circuit-breakers

For easy installation:Disbo and Mini Pragma enclosures

For lightning protection:Surge arresters

For audible indication:Bells / buzzersFor remote control:Impulse relay and contactor

For quick connection:Domae comb busbars

For short-circuit and overload protection:Domae circuit-breakers

For control:Domae switches

Page 6: Domae Catalogue Jordan and Iraq

6

Domae products can be easily identified by their new design

1- Connection terminals:terminals with guardfor rigid copper cables

2- Neutral pole positionindicator: N

3- Position handle:ON/OFF with 0/I indicator

4- Sales catalogue number

5- Clamping screw:Screw head: 5 mm blade or PZ2 recessed

Domae circuit-breaker Domae residual current circuit-breaker

Domae comb busbar

Surge arrester, Contactor, Impulse relay

To perform lightning protection and remote functions, surge arresters, impulse relays and contactors can be incorporated in all Mini Pragma switchboards.

Terminal capacity25mm² max

Tripping curve(C curve suitablefor householdapplications)

Rating(max. current rating:6, 10, 16, 20, 25, 32, 40, 50 or 63 A)

Breaking capacity(max short-circuit current: 3000 A)

Limitationclass: 3

Voltage rating (230 or 400 AC)

Overall size (1, 2, 3 or 4 )

Terminal capacity35 mm² max

Test button(Monthly test recommended)

Rating(max. current rating: 25, 40 or 63 A)

Sensitivity(30 or 300 mA)

Voltage rating (230 or 400 V AC)

Overall size (2 or 4 )

Sales cat. no(Length: 12 )

Nominal current: 63 A(cross-section 10 mm²)

Brand: Schneider Electric

End pieces

Connector

DomaeA Comprehensive Range...

1

26

7

8

910

43

5

6- Diagram

7- Brand: Schneider Electric

8- Technical information

9- Marking zone:18x12 mm user labels(SISmarker type recommended)

10- Identification of the household range:

Page 7: Domae Catalogue Jordan and Iraq

7

Disbo Extra Enclosures

> Where safety meets designThe new electrical distribution board Disbo Extra™ Single Phase consists of a range of metallic enclosures with renewed design and more safety. Disbo Extra™ Single Phase is specially suited for housing and commercial buildings.• Disbo Extra™ Single Phase in all aspects from design, safety and installation.• Disbo Extra™ Single Phase can easily be recognised with its unique and attractive front cover with 5 different colors end caps.• Disbo Extra™ Single Phase provides optimum prote-ction for both installers and end-users.

A comprehensive offer from 6 to 14 ways

There is at least one Disbo Extra™ Single Phase that meets your requirement

> Ergonomics and accessibility • Disbo Extra™ Single Phase architecture ensures extremely simple installation and connection for the installer.• Enough space is provided for good visibility and easy cable insertion.• Disbo Extra™ Single Phase is designed for convenient and fast wall mounting, with numerous possibilities for cable inlet and easy knock-out.• Clear labels make easier identification of outgoing circuit breakers, earth and neutral.

> A comprehensive system for quality and peace of mindDisbo Extra™ Single Phase is a durable product manufactured by Schneider Electric the world leader in power distribution.Disbo Extra™ Single Phase enclosure range is adapted to a large variety of requirements:- single phase- current rating up to 100A- 2 types: row and tested busbars- from 6 to 12 ways- Tested busbar according to IEC60439- Tested busbar type supplied with incoming device- flush or surface mounted- Using Schneider Electric protective devices- blank plate provided as standard- 5 different end cap colorsDisbo Extra™ Single Phase is specifically designed to accomodate Schneider Electric devices for protection of people and equipment, through its large choice of incomers (switch disconnector, Miniature Circuit Breaker) and outgoing Miniature Circuit Breaker (Multi 9 and Domae range).

> Where safety meets designThe new electrical distribution board Disbo Extra™ consists of a range of metallic enclosures with renewed design and still more safety.• Disbo Extra™ is integrated better still into buildings, whether in housing or commercial buildings.With a step ahead, Schneider Electric innovates in all aspects of the product in term of design, safety and installation.• Disbo Extra™ can easily be recognised with its unique and attractive front door shape, available in more than 18 colors.• Disbo Extra™ provides optimum protection for bothinstalelrs and end-users:- equipped with completely insulated busbar, direct contact with live parts is prevented.- type tests performed by ASTA laboratory (UK) certify that Disbo Extra™ complies with IEC 60439- 3 standard.Thanks to its clever carton box, including cement spill protection and repacking function, Disbo Extra™ is easier to install.

> A comprehensive system for quality and peace of mind Disbo Extra™ is a durable product manufactured by Schneider Electric the world leader in power distribution.Disbo Extra™ enclosure range is adapted to a large variety of requirements:- safe and elegant door lock- flush or surface mounted- 3 phases- from 12 to 54 ways- current rating up to 250 A- all Schneider Electric protective devices- wide choice of options and accessoriesDisbo Extra™ is specifically designed to accommodate Schneider Electric devices for protection of people and equipment, through its large choice of incomers (switch disconnector, Miniature Circuit Breaker, Moulded Case Circuit Breaker, earth leakage protection device), and outgoing Miniature Circuit Breaker (Multi 9 and Domae range).You will certainly find the solution to your needs with Disbo Extra™.

There is at least one Disbo Extra™ Single Phase that meets your requirement

.... Adapted Solutions

Page 8: Domae Catalogue Jordan and Iraq

8

Circuit-breakers

Protection of electric circuits againstoverloads and short-circuits.

0596

26N

-35

0596

31N

-35

0596

33N

-35

Protection

Page 9: Domae Catalogue Jordan and Iraq

9

Residual currentcircuit-breakers

Protection of electric circuits againstinsulation faults.■ 30 mA protection of people■ 300 mA fire protection

Control of on-load electric circuits, alreadyprotected against overloads and short-circuits.

Rating In ≤ 40 A

0596

39N

-35

Rating In 63 A

0596

40N

-35

0596

41N

-35

Protection

Page 10: Domae Catalogue Jordan and Iraq

10

Surge arresters

Protection of electric circuits and electronic equipment against indirectovervoltages due to lightning effect.

Function■ Includes lightning protection and an end of life safety disconnector.■ Pre-equipped with a connection accessory for the electrical link between the surge arrester and the incoming residual current circuit-breaker (1P+N only), an earthing terminal block and a connecting cable, for quick implementation in compliance with installation rules.

PB

1016

57 -

55P

B10

1658

- 55

Protection

Page 11: Domae Catalogue Jordan and Iraq

11

Switches

Control and disconnection of on-loadelectrical circuits already protectedagainst overloads and short-circuits.

PB

1013

31 -3

5P

B10

1332

- 35

PB

1013

33 -

35P

B10

1334

- 35

Control - Indicationand Time Management

Page 12: Domae Catalogue Jordan and Iraq

12

TL impulse relaysCT contactorsSO bells, RO buzzers

Remote control of a single-phaselighting circuit by impulse type electrical order.

PB

1012

87 -

40P

B10

1284

- 40

Remote control of a single-phase lighting circuit by lached type electrical order.

DB

1066

02D

B10

6636

PB

1012

85 -

40

Audible indication for homes.

Control - Indicationand Time Management

Page 13: Domae Catalogue Jordan and Iraq

13

V indicator light18

321

1832

518

326

PB

1017

85 -

13

The V indicator lights are used for luminous indication.

Control - Indicationand Time Management

Technical Data

Page 14: Domae Catalogue Jordan and Iraq

14

MIN, MINsThese timers allow closing and then opening of a contact in a determined time.MINp, MINtThis timer allows closing and then opening of a contact in a determined time, and it also provides warning that the lighting is about to be switched off by flickering of the lamplight. (switch-off warning). The MINt timer is the same as MINp with an “impulse relay” additional function (see ”MINt” technical data).PRE This is used in association with MIN or MINs timers and only on incandescent lighting circuits (not used on fluorescent, fluocompact lamps and very low voltage halogen lamps). It provides warning that the lighting is about to be switched off by reducing the brightness by 50% during the 20 to 60 s warning time.

MIN MINs MINp MINt PRECatalogue numbers 15363 CCT15232 CCT15233 CCT15234 15376Technical dataVoltage (+10 %, -15%) 230 V AC 230 V AC 230 V AC 230 V AC 230 V ACFrequency 50 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 HzAdjustable time delay 1 to 7 min. 0.5 to 20 min. 0.5 to 20 min. 0.5 to 20 min. 20 to 60 sLong time delay 1 h 1 h Consumption 1 VA < 6 VA < 6 VA < 6 VA Switching capacity (cos ϕ = 1) 16 A 16 A 16 A 16 A Operating temperature -10 to +50 °C -25 to +50 °C -25 to +55 °C -25 to +55 °C -10 to +50 °CWidth (9 mm modules) 2 2 2 2 21 screw connection per pole ■ ■ ■ ■ ■for cables up to 6 mm2 Selection of the type of connection Selector switch Automatic Automatic Automatic (3 or 4 wires)Mechanical compatibility ■ ■ ■with electrical distribution comb busbarSwitch-off warning function ■ ■ ■Impulse relay function ■Product photo

Diagram (connection)

Functions

MIN timersMIN, MINs, MINp and MINt timers Choice table

Control - Indicationand Time Management

P11

1645

P11

1643

P11

1634

P11

1642

Page 15: Domae Catalogue Jordan and Iraq

15

■ 60 minute timetable to program a repetitive cycle.■ 24 hour daily to program one cycle over a day.■ 7 day weekly to program one cycle over a week.■ 7 day weekly with dated days to program one cycle over a week and special cycles for specific days (public holidays, etc.).■ 60 minutes, 24 hours, 7 days, 7 days with dated days for all programming types.

IH, IHP time switchesOffer overview

Control - Indicationand Time Management

The intuitive switches: 4 keys and a large screen

The mechanical switches

The multifunctional switch: 60 minutes, 24 hours, 7 days, 7 days + dated days

IHP 1c.IHP 2c.IHP + 1c.IHP + 2c.IHP DCF 1c.IHP 1c (UL)IHP 2c (UL)IHP 1c 18 mm.IHP + 1c 18 mm.

With 4 keys and a display, they operate on a weekly cycle: the same programis repeated week after week.

ITM 4C-6E.

They operate with weekly or annual time programming distributed across 1, 2, 3 or 4 channels 6 inputs to condition the functions

IH 60 min 1c SRM.

3 programming types

IH 24h 1c SRM.IH 24h 1c ARM.IH 24h 2c ARM.

IHH 7d 1c ARM.IH 7d 1c ARM.IH 24h 1c ARM.IH 24h 1c SRM.

They operate on an hourly, daily or weekly cycle: the same program is repeated hour after hour (IH 60 min), day after day (IH 24 h) or week after week (IH 7d).

Page 16: Domae Catalogue Jordan and Iraq

16

The time switches control opening and closing of one or more separate circuits according to a programming pre-set by the user:■ By memorisation of On and Off switching operations for the IHP switches■ By positioning of jumpers or captive segments on a programming dial for the mechanical IH switches.An IHP or IH time switch is chosen according to the following criteria:

IH, IHP time switchesChoice table

Control - Indicationand Time Management

Designation Number Cycle period Minimum Number Saving Width Override Output contact Time of (d:day) time between of switching on mains (modules controls changeover changeover channels 2 switching operations cut off of 9 mm) On / Off switch (summer/winter) operations (cos ϕ =1)

The intuitive switchesIHP 1c 1 24 h and/or 7 d 1 min. 56 6 years 5 On / Off 16 A AutoIHP + 1c 1 24 h and/or 7 d 1 s 84 6 years 5 On / Off 16 A AutoIHP 2c 2 24 h and/or 7 d 1 min. 56 6 years 5 On / Off 16 A AutoIHP + 2c 2 24 h and/or 7 d 1 s 84 6 years 5 On / Off 16 A AutoIHP DCF 1c (2) 1 24 h and/or 7 d 1 s 42 4 years 5 On / Off 16 A AutoIHP 1c (UL) (3) 1 24 h and/or 7 d 1 min. 28 3 years 5 On / Off 16 A AutoIHP 2c (UL) (3) 2 24 h and/or 7 d 1 min. 42 5 years 5 On / Off 16 A AutoThe 18 mm intuitive switches IHP 1c 18 mm 1 24 h and/or 7 d 1 min. 28 3 years 2 On / Off 16 A AutoIHP + 1c 18 mm 1 24 h and/or 7 d 1 min. 42 3 years 2 On / Off 16 A AutoThe multifunctional switch ITM 4C-6E (4) 4 60 min., 24 h, 7 1 s (5) 5 years 10 On/Off (6) 10 A Auto 7d, 7d +dated dThe mechanical switches IH 60 mn 1c SRM 1 60 min. 1 min. 15 s 24 On - 24 Off none 6 On 16 A ManualIH 24h 1c SRM 1 24 h 30 min. 24 On - 24 Off none 6 On 16 A ManualIH 24h 1c ARM 1 24 h 30 min. 24 On - 24 Off 150 h 6 On 16 A ManualIH 24h 2c ARM 2 24 h 30 min. 24 On - 24 Off 150 h 6 On 16 A ManualIH 7d 1c ARM 1 7 days 4 h 21 On - 21 Off 150 h 6 On 16 A ManualIH 24 h + 7d 1+1 24 h + 7 d 45 min. + 12 h 16 On -16 Off 150 h 6 On 16 A Manual1+1c ARM + 7 On -7 Off The 18 mm mechanical switches IHH 7d 1c ARM 1 7 days 2 h 42 On - 42 Off 100 h 2 On / Off 16 A ManualIH 24h 1c ARM 1 24 h 15 min. 48 On - 48 Off 100 h 2 On / Off 16 A ManualIH 24h 1c SRM 1 24 h 15 min. 48 On - 48 Off none 2 On / Off 16 A ManualAccessories Programming kit (7) Memory key (7) Memory cartridge (8) ANT DCF antenna

(1) Programming of dated days allows specific switching operations on certain days. (2) The IHP DCF is synchronised on the Frankfort transmitter via the ANT DCF antenna. (3) Supply voltage: 120 V CA. (4) 4 output channels and 6 condition inputs. (5) 45 time brackets in weekly time programming, 15 time brackets in annual time programming, 20 different pulses in pulse programming.(6) On/Off via an override input or a condition input.(7) For IHP +1c and IHP+ 2c.(8) For ITM 4c-6E.

Page 17: Domae Catalogue Jordan and Iraq

17

(1) French, english, italian, spanish, german, portuguese languages.

IH, IHP time switchesChoice table

Control - Indicationand Time Management

Back-lit display “Absence Screw-less Mechanical Input for external Instruction Memory key Catalogue number random for connection compatibility control manual integratedfunction holidays with electrical holder in front faceand pulse function” distribution in front faceprogramming (9) comb busbars

■ ■ ■ ■ CCT15720 (1) ■ ■ ■ ■ 1 input ■ ■ CCT15721 (1) ■ ■ ■ ■ CCT15722 (1)■ ■ ■ ■ 2 inputs ■ ■ CCT15723 (1)Random function ■ ■ ■ 15857 ■ 15830 ■ 15831

15724 (1)■ ■ ■ 15725 (1)

Pulse function ■ ■ ■ 15270

15338 16364 15365 15337 15367 15366

15331 15336 15335 CCT15860 CCT15861 15280 15858

Page 18: Domae Catalogue Jordan and Iraq

18

Comb busbars

Distribution of electrical power supply in an enclosure. Quick assembly and disassembly of the devices connected.

PB

1016

26- 3

5P

B10

1630

- 40

PB

1016

32- 1

0

Connection

Page 19: Domae Catalogue Jordan and Iraq

19

Disbo ExtraSingle Phase

Tested busbar version

Row busbar version

Flush Mounted

Surface Mounted

Modular Enclosures

Selection of Disbo ExtraTM Single Phase

Consumer units dimension and installation type

Quick visual check of circuit breakers statusKey lock option for front door

Creating new standards in design-Color End cap Disbo Extra single phase cover with multiple color end capsto match your interiors.

X

MCB:

MCB

ROW Type

ROW

8: 8 ways10: 10 ways14: 14 ways

8

> for ordering, add suffix ' K ' to the reference

Page 20: Domae Catalogue Jordan and Iraq

20

Creativity Distinction

Elegance

Incoming Devices Outgoing Miniature Circuit Breakers

Colorful

Disbo Extra Three Phase

Standard ProtectionProtection of circuits against overload and short circuit currentsComplies with IEC 60947 and IEC 60898 standards■ DomaeCurrent rating 6 to 63 ABreaking capacity at 220 / 380 V: 3 kAAvailable in 1, 2 and 3 polesRecommended for housing and commercial applications■ C60N - C60H - C60LCurrent rating 0,5 to 63 ABreaking capacity at 220 / 380 V:

C60N:10kA C60H:15kA C60L:25kAAvailable in 1, 2 and 3 polesRecommended for commercial and industrial applications

Full ProtectionComplete protection of circuits against overload and short circuit currents as well as protection of people and goods against fire and electrical shocks.Complies with IEC 61009 standard■ C60H - RCBOCurrent rating 6 to 45 ABreaking capacity at 220 / 380 V: 10 kASensitivity 30 or 100 mAAutomatic tripping in case of loss of neutral and inversion between phase and neutralPhase and neutral in one pole module of 18 mm widthRecommended for humid and public areas

Switch DisconnectorsControl and isolation of electrical circuitsComply with IEC 60947 - 1 and 60742 - 3 standards■ I switches Current rating 40 to 125 AInsulation volatge: 580 V

Circuit BreakersProtection of circuits against overload and short-circuit currentsComply with IEC 60947 - 1 and 60742 - 3 standardsMoulded Case Circuit Breakers■ Easypact - EZ100Current rating 40 to 100 ABreaking capacity at 380 V: 18 kA■ Easypact - EZ250Current rating 125 to 250 ABreaking capacity at 380 V: 36 kA■ Compact NS100 - NS160 - NS250Current rating 16 A to 250 ABreaking capacity at 380 V:

NS100: 25 kA NS160 & NS250: 36 kAAdjustable trip unitTotal discrimination as standard with downstream circuit breakers

Earth Leakage ProtectionProtection of people and goods against fire and electrical shocksSpecially recommended for humid and public areas■ RCCBComplies with IEC 61008 standardCurrent rating 40 A to 125 ASensitivity: 300 mAInstantaneous trip releaseSelf supplied by distribution voltage, does not require any external source

The original “made in France” design of Disbo Extra™ follows the latest trends in aesthetics and architecture.

Modular Enclosures

With its unique rounded door and attractive smooth surfaces, Disbo Extra™ enriches your interior with a simple and original touch of distinction.

Whatever the installation sets out to meet, Disbo Extra™

responds in the most efficient and elegant way. Thanks to more than 20 modern and sober optional colors, personalisation takes new meaning with Disbo Extra™.

Page 21: Domae Catalogue Jordan and Iraq

21

Disbo Extra Three Phase

Provision IncomingDevice type:

I100: I Switch 3P frameR163: RCCB 4P frame EZ100: Easypact up to 100A 3P frameEZ250: Easypact up to 250A 3P frameNS100: Compact NS up to 100A 3P frameNS250: Compact NS/NB up to 160/250A 3P frame (18 ways & up)

Modular Enclosures

Tehnical Data

Structure

Enclosures

Dimensions

Busbar Mounting Type

Page 22: Domae Catalogue Jordan and Iraq

22

Disbo-ExtraDIN rail mounting system

Modular Enclosures

Function

Tehnical Data

Dimensions

Accessories for Disbo extras 3-phase busbar mounting

Page 23: Domae Catalogue Jordan and Iraq

23

Mini Pragma Flush mounting with terminal blocks 1 row, 4 to 18 modules2 and 3 rows, 12 modules per row

Enclosure with door

Number of holes

48162232

Composition10 mm2

2481116

16 mm2

2481116

Numberof rows

1111123

Capacity inmodulesof 9 mm8121624364872

modulesof 18 mm46812182436

Terminal blocksdelivered(no.x no. holes)2x42x42x8(2x4) + (2x8)2x162x162x22

Cat. no.Opaque

13371133721337313374133751393213933

Transparent

13301133021330313304133051394213943

Catalogue numbers

Mini Pragma is a distribution or subdistribution enclosure up to 63 A.It is used indoors, in housing or in the service sector, for new installations or renovation work.

Optional accessories: page 25Dimensions: page 26 - 27

additionalinformation

0561

29H

D-0

0560

80M

D-4

005

6148

13942

13374

0560

97M

D-4

0

Modular Enclosures

Function

DescriptionTechnical data

Composition

Accessories delivered with the enclosure

■ Equipped with an opaque or transparent, curved door:1 row: wicket door opens 90º upwards2 and 3 rows: door opens 180º to the right and to the left.

■ Rated current of the enclosure:4 modules: 50 A6 to 36 modules: 63 A.

■ Material:insulating, self-extinguishing materialcolour: white RAL9003.

■ Compliance with standards:complies with IEC 439.3 (EN 60 - 439 - 3).

■ Degree of protection:as in IEC 529:IP40 (protection against solids and liquids).as in EN 50 - 102: IK07 (protection against mechanical impacts)class 2 protection against indirect contact.

■ Fire and excessive heat withstand capacity as in IEC 695 - 2 - 1:enclosure: 650ºC/30 sN-earth terminal bar supports: 960ºC/30 s.

Flush mounting Mini Pragma is composed of:

■ a symmetrical base:robustof a depth adapted to walls with a low thicknesswith punch-outs for tube insertion on the 4 sides

■ 1 to 3 symmetrical rails with adjustment of verticality:1 row: adjustable symmetrical rail depth2 and 3 rows: one-piece chassis enabling wiring outside the base

■ a rigid, reversible front panel:with a curved wicket door or curved doorequipped with blanking plates which can be punched-out.

Flush mounting Mini Pragma is delivered equipped with:■ a circuit identificationstrp per row:

to be glued on the front panel■ a connection assembly:

2 earth-neutral terminal blocks2 terminal block supports

■ terminal block details:

Page 24: Domae Catalogue Jordan and Iraq

24

Modular Enclosures Mini Pragma Flush mounting with terminal blocks 1 row, 4 to 18 modules2 and 3 rows, 12 modules per row

0561

24H

D-0

0560

86M

D-4

005

6148

13922

13379

0560

91M

D-4

0

Connection assembly

Function

DescriptionTechnical data

Composition

Accessories delivered with the enclosure

Mini Pragma is a distribution or subdistribution enclosure up to 63 A.It is used indoors, in housing or in the service sector, for new installations or renovation work.

■ Equipped with an opaque or transparent, curved door:■ 1 row: wicket door opens 90º upwards■ 2 and 3 rows: door opens 180º to the right and to the left■ Rated current of the enclosure:■ 4 modules: 50 A■ 6 to 36 modules: 63 A.■ Material:■ insulating, self-extinguishing material■ colour: white RAL9003■ Compliance with standards:■ complies with IEC 439.3 (EN 60 - 439 - 3)■ Degree of protection:■ as in IEC 529: IP40 (protection against solids and liquids)■ as in EN 50 - 102 : IK07 (protection against mechanical impacts)■ class 2 protection against indirect contact (with insulating plugs on the fixing screws)■ Fire and excessive heat withstand capacity as in IEC 695 - 2 - 1:■ enclosure: 650ºC/30 s■ N - earth terminal bar supports: 960ºC/30 sSurface mounting Mini Pragma is composed of:

■ a back with:■ a centred oblong opening to simplify installation■ oblong fixing holes enabling the adjustment of verticality■ cable insertion kit:- punch-outs, on 4 panels for the 1 row enclosures- a large surface for punching (crown saw, punches) at the top and bottom of the 2 and 3 row enclosures.■ 1 to 3 metallic rails, screwed symmetrically onto the back■ a cover:■ reversible front panel, equipped with blaking plates which can be punched-out■ curved wicket door or curved door

Surface mounting Mini Pragma is delivered equipped with:■ insulating plugs:■ to be placed on the back fixing screws to obtain a class 2 insulation■ a circuit identification strip per row:■ to be glued onto the front panel■ a connection assembly:■ 2 earth-neutral terminal blocks■ 2 terminal block supportsterminal block details:

Page 25: Domae Catalogue Jordan and Iraq

25

Accessories for Mini Pragma 1 row, 4 to 18 modules2 and 3 rows, 12 modules per row

Modular Enclosures

For the finishBlanking plateBlanks the spaces where there are no devices.■ 5 dividable modules.■ Colour: white RAL9003.■ Delivered in sets of 10.Key lockProtects the access to the switchgear operating mechanism in some buildingsaccording to regulations.■ Delivered with 2 metal keys.■ Fixes onto the enclosure and the door after punch-out following the instruction manual.Sealing kitPrevents access to the live parts by sealing the base or the back with the cover.Occupies the place of one of the front panel fixing screws.Symbol plateIncludes self-adhesive pictograms which enble the outgoers to be identified.■ Ordinary symbols:

Loads:- socket- lighting- convector- etc.

locations:- bedroom- bathroom- etc.■ Special symbols:

loads:- surge arrester- gateway- pool- etc.

locations:- technical room- computer room- etc.Label support sheet Enables one’s own identification self-adhesive labels to be printed.To be printed using the Schneider Interactive Software, etc.

Function and DescriptionFor the installationHollow partition flush mounting kitEnables the flush mounting enclosure base to be fixed in a hollow partition.Set of 4 brackets and screws.For the connectionTerminal block support■ Enables the terminal blocks to be installed.■ 1 to 2 terminal block supports per enclosure.■ 12 x 2 flat bar.■ Can be clipped on the back of the enclosure, at the top or bottom.■ Sloped in order to:

assist cable insertionimprove their accessibility during locking.

Terminal blockSimplifies the wiring.■ These Pragma terminal blocks can be installed in the Mini Pragma enclosures.■ Technical data:

insulatedup to 80 A.

■ Installation:clips onto the terminal block support or the railfixes onto the back of the enclosure.

■ Composition:captive screws delivered openguides simplify the insertion of cables into the

enclosuresnumbered terminal blocks.

Insulating coverInsulates the terminal blocks for improved protection.■ Coloured: green, red or blue.■ Enables the IP2 protection level to be attained.■ 2 widths according to the width of the terminal block to be insulated.■ Is only installed on the optional terminal blocks (Pragma terminal blocks).

0478

70d

E45

102

- 40

E45

103

- 22

13735

13736

Page 26: Domae Catalogue Jordan and Iraq

26

Mini PragmaDimensions

Modular Enclosures

Surface-mounted enclosures

Page 27: Domae Catalogue Jordan and Iraq

27

Mini PragmaDimensions

Modular Enclosures

Flush-mounted enclosures

Page 28: Domae Catalogue Jordan and Iraq

28

Domae Electrical hazards in the home

Technical Info

Everyday comfort

Choice of protection devices

Page 29: Domae Catalogue Jordan and Iraq

29

Standard equipment for the home

Surface area 60 m2 100 m2 > 100 m 2

Subscribeddemand 3000 VA 6000 VA > 6000 VA

"Household incoming"connection

Number of 221"power socket" circuits

Number of 211"lighting circuits"

Number of 210"specific circuits"

Distribution Living 1 socket for 6 m2 1 socket for 6 m2 1 socket for 6 m2

room 1 lighting for 20 m2 1 lighting for 20 m2 1 lighting for 20 m2

1 special purpose socket

Bedroom 1 lighting 1 lighting 1 lighting2 sockets 3 sockets 3 sockets

1 special purpose socket

Kitchen 1 lighting 2 lightings 2 lightings3 sockets 3 sockets 3 sockets

1 socket per electrical 1 special purpose sockethousehold appliance 1 socket per electrical

household applianceBathroom 1 lighting 2 lightings 2 lightings

1 socket 1 socket 3 sockets1 special purpose socket

Entrance hall 1 lighting 1 lighting for 12 m2 1 lighting for 12 m2

1 socket 1 socket for 12 m2 1 socket for 12 m2

1 special purposesocket for 12 m2

Garage 1 lighting 1 lighting for 5 m2 1 lighting for 5 m2

m 5 rof tekcos 1dna 2 1 socket for 5 m2

esoprup laiceps 1edistuosocket for 5 m2

Technical Info

Page 30: Domae Catalogue Jordan and Iraq

Domae Miniature Circuit Breaker

Disbo Row 14 ways

Domae Surge Protection

Device

Domae Residual Current Device

Domae Switch

V IndicatorLight

Domae CTContactor

IH Time Switch

Domae TL Impulse Relay

Domae Bell

Residential

DomaeThe Right Solution for Your Home

> More protection> More comfort> More energy saving

MIN Timer

Page 31: Domae Catalogue Jordan and Iraq
Page 32: Domae Catalogue Jordan and Iraq

Schneider Electric East Mediterranean s.a.l.Ashadia Building, 10th Floor, Tabaris, Achrafieh,P.O. Box : 166223 - Beirut, LebanonTel. +961 1 204 502Fax +961 1 204 458

www.schneider-electric.com

Customer Care Centre : Iraq - Tel. +962 6 516 [email protected]

Jordan - Tel. +962 6 516 [email protected]

new packaging new product marking

Something to smile about!A stronger unified brand

Schneider Electric, benefits everyone

A new Marking for Schneider Electric Products!

From now on, you might seeAll products will be marked with the Schneider Electric logo. This will be done progressively in order to respect industrial processes. Absolutely none of the product specifications or commercial references will be changed. Only the product marking visual design changes.

It’s new. It’s modern. It’s Schneider Electric’s image for tomorrow, starting today.

Step 2

EM

ED

DO

CA

0709

EN

JOIQ

- S

chne

ider

Ele

ctric

, all

right

s re

serv

ed.

07 /

09