Dolby Fidelio wireless audio system user's manual 1 Introduction to the Dolby Fidelio wireless audio system user's manual 8 1.1 About this documentation 8 1.2 Contacting Dolby 8 2

  • View
    218

  • Download
    1

Embed Size (px)

Text of Dolby Fidelio wireless audio system user's manual 1 Introduction to the Dolby Fidelio wireless audio...

  • Dolby Fidelio wirelessaudio system user'smanual

    FDO.OM.005188.DRM Issue 2

    30 January 2017

  • Copyright 2017 Dolby Laboratories. All rights reserved.

    For information, contact:

    Dolby Laboratories, Inc.1275 Market StreetSan Francisco, CA 94103-1410 USATelephone 415-558-0200Fax 415-863-1373http://www.dolby.com

    TrademarksDolby and the double-D symbol are registered trademarks of Dolby Laboratories.

    The following are trademarks of Dolby Laboratories:

    Dialogue Intelligence

    Dolby

    Dolby Advanced Audio

    Dolby Atmos

    Dolby Audio

    Dolby Cinema

    Dolby Digital Plus

    Dolby Digital Plus Advanced Audio

    Dolby Digital Plus Home Theater

    Dolby Home Theater

    Dolby Theatre

    Dolby Vision

    Dolby Voice

    Feel Every Dimension

    Feel Every Dimension in Dolby

    Feel Every Dimension in Dolby Atmos

    MLP Lossless

    Pro Logic

    Surround EX

    All other trademarks remain the property of their respective owners.

    PatentsThis product is protected by one or more patents in the United States and elsewhere. Formore information, including a specific list of patents protecting this product, please visit http://www.dolby.com/patents.

    Safety instructions and regulatory guidelines

    ImportantPower requirements for electrical equipment vary from area to area. Please ensure that theDolby Fidelio wireless audio system meets the power requirements in the surrounding area.If in doubt, consult a qualified electrician or a Dolby Laboratories, Inc. dealer.

    Protecting yourself and the Dolby Fidelio wireless audio system

    Only a qualified professional can install the Dolby Fidelio wireless audio system. Only use theantenna provided by Dolby Laboratories, Inc.

    Dolby Fidelio wireless audio system user's manual

    30 January 2017 FDO.OM.005188.DRM Issue 2 2

    http://www.dolby.comhttp://www.dolby.com/patents

  • The Dolby Fidelio Transmitter (Fidelio TX) shall be mounted with a separation distance of atleast 20 cm from any person. The Dolby Fidelio Receiver (Fidelio RX) antenna shall be at least5 mm away from any person and at least 20 mm away from any other antenna.

    The Dolby CaptiView Transmitter, or any other antenna, shall at least be 20 cm away from theDolby Fidelio Transmitter antenna. The Dolby CaptiView Transmitter shall not be connectedto the Dolby Fidelio Transmitter.

    Never touch the AC plug with wet hands. Always disconnect the Dolby Fidelio wireless audiosystem from the power supply by pulling on the plug not the cord. Allow only a DolbyLaboratories, Inc. dealer or qualified professional engineer to repair or re-assemble the DolbyFidelio wireless audio system. Apart from voiding the warranty, unauthorized engineersmight touch live internal parts and receive a serious electric shock. Do not put, or allowanyone to put any object, especially metal objects, into the Dolby Fidelio wireless audiosystem. Use only an AC power supply. Never use a DC power supply.

    If water or any other liquid is spilled into or onto the Dolby Fidelio wireless audio system,disconnect the power and call a Dolby Laboratories, Inc. dealer. The unit must be wellventilated and away from direct sunlight. To avoid damage to internal circuitry, as well as theexternal finish, keep the Dolby Fidelio wireless audio system away from direct sources ofheat (heater vents, stoves, radiators). Avoid using flammable aerosols near the Dolby Fideliowireless audio system. They can damage the surface area and may ignite. Do not usedenatured alcohol, paint thinner or similar chemicals to clean the Dolby Fidelio wireless audiosystem. This can damage the unit.

    Modification of this equipment is dangerous and can result in the functions of the DolbyFidelio wireless audio system being impaired. Never attempt to modify the equipment in anyway. In order to ensure optimum performance of the Dolby Fidelio wireless audio system,select the setup location carefully and make sure the equipment is used properly. Avoidsetting up the Dolby Fidelio wireless audio system in the following locations:

    In a humid or dusty environment.

    In a room with poor ventilation.

    On a surface which is not level.

    Inside a moving vehicle where it will be subject to vibration.

    In an extremely hot or cold environment.

    FCC WarningDolby Fidelio Transmitter and Dolby FidelioReceiver (Fidelio TX/Fidelio RX)Be aware that any change or modification not expressly approved by Dolby Laboratoriescould void the users authority to operate the equipment.

    This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) This device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesired operation.

    Note: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the useris encouraged to try to correct the interference by one or more of the following measures:

    Dolby Fidelio wireless audio system user's manual

    30 January 2017 FDO.OM.005188.DRM Issue 2 3

  • Reorient or relocate the receiving antenna.

    Increase the separation between the equipment and receiver.

    Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.

    Consult the dealer or an experienced radio/TV technician for help.

    IC StatementDolby Fidelio Transmitter and Dolby FidelioReceiver (Fidelio TX/Fidelio RX)This device complies with Industry Canada licence-exempt RSS standard(s). Operation issubject to the following two conditions: (1) this device may not cause interference, and (2)this device must accept any interference, including interference that may cause undesiredoperation of the device.

    Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareilne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter toutbrouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre lefonctionnement.

    Under Industry Canada regulations, this radio transmitter may only operate using an antennaof a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. Toreduce potential radio interference to other users, the antenna type and its gain should beso chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than thatnecessary for successful communication.

    Conformment la rglementation d'Industrie Canada, le prsent metteur radio peutfonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pourl'metteur par Industrie Canada. Dans le but de rduire les risques de brouillageradiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et songain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pasl'intensit ncessaire l'tablissement d'une communication satisfaisante.

    Dolby Fidelio wireless audio system user's manual

    30 January 2017 FDO.OM.005188.DRM Issue 2 4

  • Warning label

    Dolby Fidelio wireless audio system user's manual

    30 January 2017 FDO.OM.005188.DRM Issue 2 5

  • Contents

    1 Introduction to the Dolby Fidelio wireless audio system user's manual 81.1 About this documentation 81.2 Contacting Dolby 8

    2 Dolby Fidelio wireless audio system 92.1 Dolby Fidelio wireless audio system hardware components 92.2 Dolby Fidelio Transmitter 92.3 Dolby Fidelio Receiver 102.4 Dolby Fidelio Tablet 102.5 Dolby Fidelio charging station 112.6 Dolby Fidelio audio interface box 12

    3 Installing the Dolby Fidelio Tablet and Dolby Fidelio charging station 133.1 Installing the tablet bracket with the Dolby Fidelio charging station

    133.2 Charging a Dolby Fidelio Receiver 143.3 Charging the Dolby Fidelio Tablet 153.4 Powering off the Dolby Fidelio Tablet 16

    4 Setting up the Dolby Fidelio Transmitter 174.1 Assigning the Dolby Fidelio Transmitter channel to an auditorium

    174.2 Supplying power to the Dolby Fidelio Transmitter 194.3 Connecting the Dolby CaptiView Transmitter 19

    5 Installing the Dolby Fidelio audio interface box 215.1 Connecting the Dolby Fidelio audio interface box using 25-pin D-

    connector audio cables 215.2 Connecting the Dolby Fidelio audio interface box using RJ-45 audio

    cables 22

    6 Configuring a Dolby Fidelio Receiver 246.1 Assigning a Dolby Fidelio Receiver to the Dolby Fidelio Transmitter

    24

    7 Updating the Dolby Fidelio wireless audio system software and firmware277.1 Updating the Dolby Fidelio Tablet software 277.2 Updating the Dolby Fidelio Transmitter firmware 297.3 Updating a Dolby Fidelio Receiver firmware 31

    8 Troubleshooting 348.1 Damaged or replaced Dolby Fidelio Transmitter 34

    8.1.1 Erasing the Fidelio app data 348.1.2 Erasing the micro SD card data 368.1.3 Erasing the USB storage data 38

    8.2 Damaged Dolby Fidelio Tablet 408.2.1 Replacing the micro SD card 408.2.2 Generating a detailed report 41

    Dolby Fidelio wireless audio system user's manual