Embed Size (px)
Citation preview
ICS 23.040.01; 91.140.80
Descriptors: Plastics, waste water pipes, specifications.
Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser(niedriger und hoher Temperatur) innerhalb der Gebäudestruktur –Polypropylen (PP) – Teil 1: Anforderungen an Rohre, Formstücke unddas Rohrleitungssystem
Ref. No. DIN EN 1451-1 : 1999-03English price group 13 Sales No. 1113
09.99
DEUTSCHE NORM March 1999
EN 1451-1{
EN comprises 32 pages.
© No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut für Normung e.V., Berlin.Beuth Verlag GmbH, D-10772 Berlin, has the exclusive right of sale for German Standards (DIN-Normen).
Plastics piping systems for soil and waste discharge (lowand high temperature) within the building structure –
Polypropylene (PP)Part 1: Specifications for pipes, fittings and the systems
English version of DIN EN 1451-1
European Standard EN 1451-1 : 1998 has the status of a DIN Standard.
A comma is used as the decimal marker.
National forewordThis standard has been prepared by CEN/TC 155.The responsible German body involved in its preparation was the Normenausschuß Wasserwesen (WaterPractice Standards Committee), Technical Committee Kunststoffrohre in der Abwassertechnik.It should be noted that for a period ending 16 December 2000 DIN V 19560-10 continues to be valid inGermany. During this period polystyrene pipes for use inside buildings may be manufactured to conformeither to DIN V 18560 or to the present standard, in conjunction with with DIN 19560-10.The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are asfollows:ISO Standard DIN Standard(s)ISO 265-1 DIN 19531ISO 1043-1 DIN EN ISO 1043-1*)ISO 1133 DIN EN ISO 1133*)ISO/TR 10358 DIN 8061, DIN 8075*) and DIN 8078
AmendmentsDIN V 19560, September 1992 edition, has been superseded by the specifications of EN 1451-1.
Previous editionsDIN 19560: 1977-03, 1980-03; DIN V 19560: 1992-09.
National Annex NAStandard referred to(and not included in Normative references)DIN 8061 Unplasticized polyvinylchloride (PVC-U) pipes – General quality requirements and testingDIN 8075 Polyethylene (PE, PE 63, PE 80, PE 100 and PE-HD) pipes – General quality requirements
and testing*)DIN 8078 Types 1, 2 and 3 polypropylene (PP) pipes – General quality requirements and testingDIN 19531 Unplasticized polyvinyl chloride (PVC) socket pipes and fittings for sewers inside build-
ings – Dimensions and technical delivery conditionsDIN 19560-10 Polypropylene (PP) socket pipes and fittings for hot water resistant drainage systems inside
buildings - Dimensions and technical delivery conditions
*) At present at draft stage.
This standard, togetherwith DIN 19560-10,March 1999 edition,supersedes DIN V 19560,September 1992 edition.
English version
ICS 23.040.01; 91.140.80
Descriptors: Plastics, waste water pipes, specifications.
Central Secretariat: rue de Stassart 36, B-1050 Brussels
European Committee for StandardizationComité Européen de NormalisationEuropäisches Komitee für Normung
Plastics piping systems for soil and waste discharge(low and high temperature) within the building
structure – Polypropylene (PP)Part 1: Specifications for pipes, fittings and the systems
© 1998. CEN – All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.
Ref. No. EN 1451-1 : 1998 E
Systèmes de canalisations enplastique pour l’évacuation des eaux-vannes et des eaux usées (à basse età haute température) à l’intérieur dela structure des bâtiments – Poly-propylène (PP) – Partie 1: Spécifi-cations pour tubes, raccords ainsique pour le système
Kunststoff-Rohrleitungssysteme zumAbleiten von Abwasser (niedriger undhoher Temperatur) innerhalb derGebäudestruktur – Polypropylen(PP) – Teil 1: Anforderungen anRohre, Formstücke und dasRohrleitungssystem
This European Standard was approved by CEN on 1998-06-01.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Central Secretariat or to any CENmember.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Central Secretariat has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,and the United Kingdom.
ÈÉË
EN 1451-1
December 1998
Page 2EN 1451-1 : 1998
Page 3EN 1451-1 : 1998
Page 4EN 1451-1 : 1998
Page 5EN 1451-1 : 1998
Page 6EN 1451-1 : 1998
Page 7EN 1451-1 : 1998
Page 8EN 1451-1 : 1998
Page 9EN 1451-1 : 1998
Page 10EN 1451-1 : 1998
Page 11EN 1451-1 : 1998
Page 12EN 1451-1 : 1998
Page 13EN 1451-1 : 1998
Page 14EN 1451-1 : 1998
Page 15EN 1451-1 : 1998
Page 16EN 1451-1 : 1998
Page 17EN 1451-1 : 1998
Page 18EN 1451-1 : 1998
Page 19EN 1451-1 : 1998
Page 20EN 1451-1 : 1998
Page 21EN 1451-1 : 1998
Page 22EN 1451-1 : 1998
Page 23EN 1451-1 : 1998
Page 24EN 1451-1 : 1998
Page 25EN 1451-1 : 1998
Page 26EN 1451-1 : 1998
Page 27EN 1451-1 : 1998
Page 28EN 1451-1 : 1998
Page 29EN 1451-1 : 1998
Page 30EN 1451-1 : 1998
Page 31EN 1451-1 : 1998
Page 32EN 1451-1 : 1998
