Upload
vancong
View
241
Download
0
Embed Size (px)
Citation preview
| 229
DIMENSION CIRCULAR SAWS
1. Table sawFor precise cutting on workpieces up
to 83 mm in thickness.
2. Flush-mounted circular sawThe 1800 mm dimension sliding
table enables cuts up to 1450 mm
in length.
3. Dimension circular sawThe flush-mounting enables the
cutting of workpieces up to 330 mm
in width.
THE FUNCTION FOLLOWS THE SHAPE.
Metabo dimension circular saws are for straight cuts.
They can be used to cut small and large workpieces
with precision and safely. Non-parallel cuts are no pro-
blem either, as the workpieces are guided ideally on the
dimension sliding table with needle ball bearings. Raw,
untrimmed boards can be handled with ease with a
Metabo dimension circular saw – the hold-down plate
also supplied makes sure of that. Dimension circular
saws provide you with the wide range of functions that
you need for fast working.
e.g. PKU 250
Easy to use due to practical
operation and
function elements.
Integrated flush-mounted device
for cutting
workpieces up
to 330 mm in width.
Sturdy, anodised tablemade of
extruded
sections.
Mounting and dismantling
without tools– no readjustment –
table width extension
and table length
extension for sawing
large workpieces.
Dimension sliding table with needle ball bearing
for exact cuts of up to
1450 mm in length.
Exact workby high precision.
Versatile use dueto comprehensive
range of accessories.
Switch with lockable cover.
Easy to transportdue to four extendable
handles.
“Sawdust-tested“
in compliance with
TRGS 553
WEL
DIN
G T
ECH
NO
LOG
YW
OO
D P
RO
CES
SIN
G
TEC
HN
OLO
GY
GR
IND
ING
MA
CH
INES
CO
MPR
ESS
ED A
IR S
YS
TEM
SW
ATE
R A
ND
PU
MP
TEC
HN
OLO
GY
230 |
PKU 250 - 2,7 DN-1800
PKU 250 - 2,1 WN-920
DIMENSION CIRCULAR SAWS
Special advantages For single phase alternating current
For three phase current
With 920 mm dimension sliding table
With 1,800 mm dimension
sliding table
Comparative device characteristicsMachine table 810 x 345 mm 810 x 345 mm 810 x 345 mm 810 x 345 mm
Working height
- With machine stand 890 mm 890 mm 890 mm 890 mm
- Without machine stand 370 mm 370 mm 370 mm 370 mm
Cutting height 90/45° 83 mm/48 mm 83 mm/48 mm 83 mm/48 mm 83 mm/48 mm
Rated load speed 4.400 /min 4.400 /min 4.400 /min 4.400 /min
Cutting speed 57 m/s 57 m/s 57 m/s 57 m/s
Max. cutting width
- With ripping fence 380 mm 380 mm 380 mm 380 mm
Max. cutting length
- With dimension sliding table 800 mm 800 mm 1.450 mm 1.450 mm
Saw blade Ø 250 x 30 mm Ø 250 x 30 mm Ø 250 x 30 mm Ø 250 x 30 mm
Saw blade swivel range -1,5 - 46,5 ° -1,5 - 46,5 ° -1,5 - 46,5 ° -1,5 - 46,5 °
Rated input power 2,1 kW 2,7 kW 2,1 kW 2,7 kW
Output power 1,6 kW 2 kW 1,6 kW 2 kW
Suction connections 100/82 mm 100/82 mm 100/82 mm 100/82 mm
Weight 155 kg 155 kg 171,5 kg 171,5 kg
Standard equipment Carbide-tipped saw blade
with alternately bevel-
ground tips (24 teeth),
cabinet base, short
dimension sliding table,
parallel stop with
magnifying glass, saddle
with fence, table length
extension, table width
extension, chip extraction
connections, push stick
Carbide-tipped saw blade
with alternately bevel-
ground tips (24 teeth),
cabinet base, short
dimension sliding table,
parallel stop with
magnifying glass, saddle
with fence, table length
extension, table width
extension, chip extraction
connections, push stick
Carbide-tipped saw blade
with alternately bevel-
ground tips (24 teeth),
cabinet base, long
dimension sliding table,
parallel stop with
magnifying glass, saddle
with fence, table length
extension, table width
extension, chip extraction
connections, push stick
Carbide-tipped saw blade
with alternately bevel-
ground tips (24 teeth),
cabinet base, long
dimension sliding table,
parallel stop with mag-
nifying glass, saddle
with fence, table length
extension, table width
extension, chip extraction
connections, push stick
Type PKU 250 – 2,1 WN-920 PKU 250 – 2,7 DN-920 PKU 250 – 2,1 WN-1800 PKU 250 – 2,7 DN-1800Order no. 0199250000 0199250400 0199250100 0199250500
EQUIPMENT FEATURES Three high quality machines in one: table saw, flush-mounted cir-
cular saw and dimension circular saw
Demountable for large range of use
Ideal for made-to-measure cutting of dimensions
Sturdy, low-noise induction motor
Thermal overload protection for long service life
Table width extension is integrated sideways
Angular guide with adjustable scale for exact adjustment
and magnifying glass for convenient display of the saw blade
distance and for excellent repeating accuracy
Saw blade inclinable by –1.5°-46.5°; suitable for rear cuts
Lockable switch protects from unauthorised use
Dimension sliding table with needle ball bearing
Large surface, anodised tables made of aluminium extruded
sections
Machine housing made of powder-coated, torsion-resistant
sheet steel
Dustproof according to TRGS 553 by FPH
Extensive range of accessories
Dimension circular saw PKU 250 – 2,1 WN-920
Dimension circular saw PKU 250 – 2,7 DN-920
Dimension circular saw PKU 250 – 2,1 WN-1800
Dimension circular saw PKU 250 – 2,7 DN-1800
0199250138 GB 230 V
| 231
DIMENSION CIRCULAR SAWS
Accessory for PKU 250
Order no.
Cabinet base With quick-locking
mechanisms for easy
insertion into and removal
from the machine without
having to use tools
Lockable drawer on rollers
and drawer for collecting
chips
Moving attachment with
lowerable wheels
Working height: 890 mm
0910059971
Stand For ideal working height
and secure base
Robust aluminium
construction, easy to
transport
With height compensation
Collapsible
Working height: 890 mm
0910059980
Table width extension The table width extension
increases the support
surface; ideal for cutting
panels
Enables cuts on length
stop up to 700 mm width
When using a second table
width extension, cuts on the
length stop of up to 1160
mm wide are possible
Mounting without having
to use tools or readjust
Length: 865 mm
Width: 440 mm
0910060007
Support For supporting the table
width extension 0910060007
Height adjustable
Absolutely necessary when
using a second table width
extension
0910060015
Supplementary table For converting to the table
saw / flush-mounted radial
pull saw, instead of the
dimension sliding table
(left side)
Mounting without having
to use tools or readjust
Length: 865 mm
Width: 345 mm
0910060023
Combined crosscut fence and length stop Universal fence for mitre
cuts and double mitre cuts
For use on the
supplementary table
091 006 0023
Can be turned 180° (2 x 90°)
Stop length: 650 mm
0910060031
Order no.
Scoring unit Enables the splinter-free
sawing on both sides
of coated or veneered
materials
Carbide saw blade with
60 teeth required
(0910031023)
Consisting of: Slitting
saw, carbide relieving saw
blade 88x3.0/4.0x30Z=8FK,
protective cover and round
belts for the drive
0910060040
Short dimension sliding table For cuts of up to 800 mm in
length – at 83 mm cutting
height
With 1200 mm long running
rail and hold-down plate
For converting the machine
with long dimension sliding
table to the version with short
dimension sliding table
Length: 920 mm
Width: 220 mm
0910060104
Long dimension sliding table For cuts of up to 1450 mm
in length – at 83 mm cutting
height
With 1800 mm long running
rail and hold-down plate
For converting the machine
with short dimension sliding
table to the version with long
dimension sliding table
Length: 1.800 mm
Width: 220 mm
0910060112
Length stop Enables the cutting to length
of workpieces up to 2 m in
length
To be inserted into the fence
of the saddle
With adjustable aluminium
scale
Can be pulled out
0910060120
Supplementary stop Simplifies non-parallel cuts
With holding rail to insert
into the dimension sliding
tables
Can also be used as
additional supporting
surface
0910060139
Double mitering fence Enables very precise mitre
cuts in the easiest way,
e.g. on frame pieces with
varying width
Both angles are fixed by
setting the double mitre
fence. Thus, there is no need
to change the angle on the
crosscut fence of the machine.
Thus, there is no need
to change the angle on
the crosscut fence of the
machine
With holding rail, for insertion
in the dimension sliding tables
0910060147
Clamping device For clamping workpieces
on to the dimension sliding
table
0910060155
WEL
DIN
G T
ECH
NO
LOG
YW
OO
D P
RO
CES
SIN
G
TEC
HN
OLO
GY
GR
IND
ING
MA
CH
INES
CO
MPR
ESS
ED A
IR S
YS
TEM
SW
ATE
R A
ND
PU
MP
TEC
HN
OLO
GY
232 |
DIMENSION CIRCULAR SAWS
Dust extraction accessories
Order no.
Suction hoses PKU 250 For extraction at two points
(machine’s suction connection
and protective cover's extraction
adaptor nozzle)
Connector Ø 58 mm / 35 mm
Y-piece 0910060090 required
Suction hose Length: 1.750 mm
Diameter: 35 mm
0910060074
Suction hose Low flammability
Length: 2.500 mm
Diameter: 35 mm
0910060066
Suction hose Length: 3.500 mm
Diameter: 35 mm
0910060058
Suction hose holder To lead the suction hose
connected to the protective
hood of the machine away
from the sawing area
If extraction takes place at
two points (machine’s suction
connection and protective cover’s
extraction adaptor nozzle)
0910060082
Y-piece With locking plug 58 mm
With connection option for the
suction hose of the vacuum extractor
and a suction hose with connecting
piece Ø 58 mm
0910060090
Roller stands
For supporting long workpieces when sawing, milling,
planing and drilling
Sturdy, height-adjustable and foldable
Order no.
Roller stand RS 420 With smooth-rolling special steel
Rollers with a high load capacity
Width: 400 mm
Base weight: 100 kg
0910053353
Roller stand RS 420 G With smooth-rolling chromium-plated
ball bearings
Also permits lateral movements
Ideal for panel material
Width: 520 mm
Base weight: 100 kg
0910053345
Roller stand RS 420 W With smooth-rolling chromium-plated
ball bearings
Adjustable ball bearing gib
Also permits lateral movements
Ideal for panel material, round or
square workpieces
Width: 420 mm
Base weight: 100 kg
0910053361
Spray for maintenance and care
Order no.
Spray for maintenance and care Ideal for maintenance and care of
wood processing machines
Contains silicon, prevents saw dust
from sticking, e.g. to threaded rods
or sliding bearings
Increases the gliding quality of the
workpieces on the machine table
High cleaning capacity
0911018691
Circular saw blades
Top cutting results thanks to teeth ground on
all sides and high accuracy of flatness and
concentric running
Tungsten carbide blades: Long service life
thanks to use of unmixed carbide
Can be reground repeatedly
Made in Germany
Material Dimensionsmm
Tooth pitch
Version Order no.
Tungsten
carbide
250 x 3,2 x 30 Alternatively
bevel-ground tips
0910010212
Tungsten
carbide
250 x 2,8 x 30 24 Alternatively
bevel-ground tips
0910060368
Tungsten
carbide
250 x 2,8 x 30 34 Alternatively
bevel-ground tips,
secondary hole
holder
0910030990
Tungsten
carbide
250 x 2,8 x 30 42 Alternatively
bevel-ground tips,
secondary hole
holder
0910031015
Tungsten
carbide
250 x 2,8 x 20 48 Roof hollow
tooth, secondary
hole holder
0910010166
Tungsten
carbide
250 x 2,8 x 30 60 Alternatively
bevel-ground tips,
secondary hole
holder
0910031023
Tungsten
carbide
250 x 3,2 x 30 60 Alternatively
bevel-ground tips,
secondary hole
holder
0910010182
Tungsten
carbide
250 x 2,8 x 30 80 Alternatively
bevel-ground tips,
secondary hole
holder
0910031031
Tungsten
carbide
250 x 2,8 x 30 80 Flat tooth/
trapezoid tooth,
5° negative
0910031040
Relieving saw blades Tungsten
carbide
88 x 3 x 30 8 Flat tooth,
conical,
tapered bit
0910060392
58 mmbore-Ø
100 mmbore-Ø
100 mmdiameter-Ø
| 233
PKF 255 V8 DN PKF 255 V8 WN
DIMENSION CIRCULAR SAWS
Special advantages For single phase alternating current
For three phase current
Comparative device characteristicsMachine table 660 x 760 mm 660 x 760 mm
Working height
- With machine stand 940 mm 940 mm
- Without machine stand 525 mm 525 mm
Cutting height 90/45° 80 mm/53 mm 80 mm/53 mm
Rated load speed 3.800 /min 3.800 /min
Cutting speed 50 m/s 50 m/s
Max. cutting width
- With ripping fence 300 mm 300 mm
Max. cutting length
- With dimension sliding table 1.400 mm 1.400 mm
Saw blade Ø 250 x 30 mm Ø 250 x 30 mm
Saw blade swivel range -1,5 - 46,5 ° -1,5 - 46,5 °
Rated input power 2,5 kW 3,4 kW
Output power 1,9 kW 2,5 kW
Suction connections 100 mm 100 mm
Weight 136 kg 136 kg
Standard equipment Carbide-tipped saw blade with alternately
bevel-ground tips (60 teeth), stand, long
dimension sliding table, parallel stop with
magnifying glass, angular guide, table length
extension, chip and dust extraction unit, chip
extraction connections, push stick
Carbide-tipped saw blade with alternately
bevel-ground tips (60 teeth), stand, long
dimension sliding table, parallel stop with
magnifying glass, angular guide, table length
extension, chip and dust extraction unit, chip
extraction connections, push stick
Type PKF 255 V8 WN PKF 255 V8 DNOrder no. 0192593441 0192593433
EQUIPMENT FEATURES Demountable for large range of use
Ideal for trimming massive wood
Ideal for made-to-measure cutting of dimensions
Two powerful motors with separate switches
Table length extension and stand included in scope of delivery
(from May 2006)
Large dimension circular saw with integrated relieving unit
Relieving unit with separate motor for non-stop cutting of
coated materials; no rework of cut edges
Convenient adjustment of the large carbide-tipped relieving
saw blade from outside to the material height
Synchronous angular adjustment of relieving unit and circular
saw blade in one adjustment process
Inclinable saw blade
Large surface, anodised tables made of aluminium extruded
sections
Machine housing made of powder-coated, torsion-resistant
sheet steel
Dustproof according to TRGS 553 by FPH
Extensive range of accessories
Dimension circular saw PKF 255 V8 WN
Dimension circular saw PKF 255 V8 DN
WEL
DIN
G T
ECH
NO
LOG
YW
OO
D P
RO
CES
SIN
G
TEC
HN
OLO
GY
GR
IND
ING
MA
CH
INES
CO
MPR
ESS
ED A
IR S
YS
TEM
SW
ATE
R A
ND
PU
MP
TEC
HN
OLO
GY
0192592550 GB 230 V
234 |
DIMENSION CIRCULAR SAWS
ACCESSORY FOR PKF 255 V8
Stands
Order no.
Cabinet base For ideal working height and secure
base
Robust, powder-coated sheet steel
construction
Working height: 920 mm
0910050435
Wheel Set
Order no.
Wheel Set For the easy transportation of the
machine mounted on the cabinet
base
0910007262
Base support system
Order no.
Base support system Necessary for the mounting
of sliding tables, table length
extensions and table width
extensions
Fastening / locking at the front and
rear side of the machine housing
Length 720 mm
0910050010
Accessories for the basic support system
Order no.
Extension piece Lengthens the base support system
by 720 mm
Allows you to make broader cuts at
the length stop of up to 1400 mm
Delivery includes height-adjustable
support leg
0910050028
Support leg Additional support leg for better
support of the base support
extension
Height adjustable
0910050036
Table length extension For the secure supporting of long
workpieces
With height adjustable support leg
and auxiliary fence rails
Eccentric clamping - easy to mount
and dismount
Front/rear mounting on the base
support system
Length: 1.000 mm
Width: 200 mm
0910018469
Table width extension The table width extension
increases the support surface;
ideal for cutting panels
Enables cuts on length stop up to
700 mm width
When using a base support
extension, cuts on the length stop
of up to 1400 mm wide are possible
Left/right mounting on the base
support system
Length: 775 mm
Width: 200 mm
0910040480
Traverse carriages
Order no.
Traverse carriage for dimension sliding table For fixing to the 950 mm long
dimension sliding table
The length stop can be swivelled
to the left and right up to 45°
Cutting width 900 mm at 80 mm
cutting height
Including frame support profile
0199000004
Traverse carriage for dimension sliding table For fixing to the 1800 mm long
dimension sliding table
The length stop can be swivelled
to the left and right up to 45°
Cutting width 1400 mm at 80 mm
cutting height
Including frame support profile
0199000012
Circular saw blades
Top cutting results thanks to teeth ground on
all sides and high accuracy of flatness and
concentric running
Tungsten carbide blades: Long service life
thanks to use of unmixed carbide
Can be reground repeatedly
Made in Germany
Material Dimensionsmm
Tooth pitch
Version Order no.
Tungsten
carbide
250 x 3,2 x 30 Alternatively
bevel-ground tips
0910010212
Tungsten
carbide
250 x 2,8 x 30 24 Alternatively
bevel-ground tips
0910060368
Tungsten
carbide
250 x 2,8 x 30 34 Alternatively
bevel-ground tips,
secondary hole
holder
0910030990
Tungsten
carbide
250 x 2,8 x 30 42 Alternatively
bevel-ground tips,
secondary hole
holder
0910031015
Tungsten
carbide
250 x 2,8 x 20 48 Roof hollow tooth,
secondary hole
holder
0910010166
Tungsten
carbide
250 x 2,8 x 30 60 Alternatively
bevel-ground tips,
secondary hole
holder
0910031023
Tungsten
carbide
250 x 3,2 x 30 60 Alternatively
bevel-ground tips,
secondary hole
holder
0910010182
Tungsten
carbide
250 x 2,8 x 30 80 Alternatively
bevel-ground tips,
secondary hole
holder
0910031031
Tungsten
carbide
250 x 2,8 x 30 80 Flat tooth/
trapezoid tooth,
5° negative
0910031040
Scoring saw blades Tungsten
carbide
90 x 3,2 x 30 10 Flat tooth, conical,
tapered bit
0910052489
Tungsten
carbide
90 x 2,8 x 30 10 Flat tooth, conical,
tapered bit
0910062999
| 235
TS 250
TABLE SAWS
Comparative device characteristicsMachine table 755 / 985 x 645 mm
Working height
- With machine stand 900 mm
- Without machine stand 330 mm
Cutting height 90/45° 77 mm/52 mm
Rated load speed 2.624 /min
Cutting speed 34 m/s
Max. cutting width
- With ripping fence 390 mm
- With crosscut fence
- With dimension sliding table
Saw blade Ø 250 x 30 mm
Saw blade swivel range -1,5 - 46,5 °
Rated input power 2 kW
Output power 1,2 kW
Suction connections 58 mm
Weight 32 kg
Standard equipment Carbide-tipped saw blade with
alternately bevel-ground tips
(34 teeth), parallel stop, angular
guide, table width extension,
saw blade case, chip extraction
connections, cable winder, push
stick
Type TS 250Order no. 0102502000
EQUIPMENT FEATURES Demountable for large range of use
For mobile use
Powerful universal motor
Soft-start technology
Table width extension is integrated sideways
Angular guide with fence ruler
Inclinable saw blade
Extensive range of accessories
For single phase alternating current
Table saw TS 250
Machine stand
Order no.
For ideal working height
and secure base
Collapsible
0910061135
Chip and dust extractor units
Order no.
Chip and dust extractor unit For a cleaner work environment
and an unobstructed view of the
workpiece you want to cut
For connection to a chip and dust
extractor unit or the Metabo all-
purpose vacuum cleaner
Suction in two places (the machine’s
suction connection and the
protective cover's extraction
adaptor nozzle)
Consists of suction hose and
2 connectors
Extraction adaptor nozzle Ø 100 mm
0910061127
Suction adapter
Order no.
Suction adapter Multi 0910058010
Circular saw blades
Top cutting results thanks to teeth ground on
all sides and high accuracy of flatness and
concentric running
Tungsten carbide blades: Long service life
thanks to use of unmixed carbide
Can be reground repeatedly
Made in Germany
Material Dimensionsmm
Tooth pitch
Version Order no.
Tungsten
carbide
250 x 3,2 x 30 Alternatively bevel-
ground tips
0910010212
Tungsten
carbide
250 x 2,8 x 30 24 Alternatively bevel-
ground tips
0910060368
Tungsten
carbide
250 x 2,8 x 30 34 Alternatively bevel-
ground tips, secon-
dary hole holder
0910030990
Tungsten
carbide
250 x 2,8 x 30 42 Alternatively bevel-
ground tips, secon-
dary hole holder
0910031015
Tungsten
carbide
250 x 2,8 x 20 48 Roof hollow tooth,
secondary hole
holder
0910010166
Tungsten
carbide
250 x 2,8 x 30 60 Alternatively bevel-
ground tips, secon-
dary hole holder
0910031023
Tungsten
carbide
250 x 3,2 x 30 60 Alternatively bevel-
ground tips, secon-
dary hole holder
0910010182
Tungsten
carbide
250 x 2,8 x 30 80 Alternatively bevel-
ground tips, secon-
dary hole holder
0910031031
Tungsten
carbide
250 x 2,8 x 30 80 Flat tooth/ trapezoid
tooth, 5° negative
0910031040
100 mmdiameter-Ø
58 mm44 mmdiameter-Ø
bore-Ø44 mm58 mm
WEL
DIN
G T
ECH
NO
LOG
YW
OO
D P
RO
CES
SIN
G
TEC
HN
OLO
GY
GR
IND
ING
MA
CH
INES
CO
MPR
ESS
ED A
IR S
YS
TEM
SW
ATE
R A
ND
PU
MP
TEC
HN
OLO
GY
0102502038 GB 230 V0102502039 GB 110 V
236 |
TKHS 315 C - 2,0 WNB
TKHS 315 C - 2,8 DNB
TKHS 315 M - 2,5 WNB
TKHS 315 M - 3,1 WNB
TABLE SAWS
Type TKHS 315 C - 2,0 WNB
TKHS 315 C - 2,8 DNB
Order no. 0103152000 0103152100
EQUIPMENT FEATURES Ideal for sawing beams, boards, sheets and wood-like materials
in the workshop and at construction sites
A chip and dust extractor unit or a wet-dry-vacuum cleaner can
be connected to the standard chip and dust extractor unit
Universal fence for straight cuts, can also be used as sliding
table
Angular adjustment of saw blade continuously adjustable
Sturdy, powder-coated sheet steel design and galvanised
table-top
Table saw TKHS 315 C -
2,0 WNB
Table saw TKHS 315 C -
2,8 DNB
Comparative device characteristicsTable size 600 x 800 mm 600 x 800 mm
Cutting height 90/45° 85 mm/53 mm 85 mm/53 mm
Cutting speed 50 m/s 50 m/s
Saw blade Ø 315 x 30 mm Ø 315 x 30 mm
Rated input power 2,5 kW 3,1 kW
Weight 64 kg 64 kg
Standard equipment Carbide-tipped
saw blade with
alternately bevel-
ground tips
(24 teeth), wheel
set incl. handles,
parallel stop,
angular guide,
table length
extension, chip
and dust extractor
unit, chip extrac-
tion connections,
push stick
Carbide-tipped
saw blade with
alternately bevel-
ground tips
(24 teeth), wheel
set incl. handles,
parallel stop,
angular guide,
table length
extension, chip
and dust extractor
unit, chip extrac-
tion connections,
push stick
Type TKHS 315 M - 2,5 WNB
TKHS 315 M - 3,1 WNB
Order no. 0103153000 0103153100
EQUIPMENT FEATURES Ideal for sawing beams, boards, sheets and wood-like
materials in the workshop and at construction sites
A chip and dust extractor unit or a wet-dry-vacuum cleaner
can be connected to the standard chip and dust extractor unit
Smooth running angular guide, can also be used as sliding
table
Sturdy parallel stop with eccentric clamp
Angular adjustment of saw blade continuously adjustable
Sturdy, powder-coated sheet steel design and galvanised
table-top
Foldable table length extension
Frame and motor pre-mounted
For single phase alternating current
Table saw TKHS 315 M -
2,5 WNB
Table saw TKHS 315 M -
3,1 WNB
Special advantages For single phase
alternating current
For three phase current
Comparative device characteristicsTable size 550 x 800 mm 550 x 800 mm
Cutting speed 50 m/s 50 m/s
Saw blade Ø 315 x 30 mm Ø 315 x 30 mm
Rated input power 2 kW 2,8 kW
Weight 55 kg 55 kg
Standard equipment Carbide-tipped
saw blade with
alternately bevel-
ground tips
(24 teeth), wheel
set incl. handles,
universal fence,
table length
extension, chip
and dust extractor
unit, chip extrac-
tion connections,
push stick
Carbide-tipped
saw blade with
alternately bevel-
ground tips
(24 teeth), wheel
set incl. handles,
universal fence,
table length
extension, chip
and dust extractor
unit, chip extrac-
tion connections,
push stick
0103153038 GB 230 V0103153039 GB 110 V
0103152038 GB 230 V
| 237
TKHS 315 M - 3,4 DNB
TKHS 315 M - 4,2 DNB
TABLE SAWS
Comparative device characteristicsTable size 600 x 800 mm 600 x 800 mm
Cutting height 90/45° 85 mm/53 mm 85 mm/53 mm
Cutting speed 50 m/s 50 m/s
Saw blade Ø 315 x 30 mm Ø 315 x 30 mm
Rated input power 3,4 kW 4,2 kW
Weight 64 kg 64 kg
Standard equipment Carbide-tipped
saw blade with
alternately bevel-
ground tips
(24 teeth), wheel
set incl. handles,
parallel stop,
angular guide,
table length
extension, chip
and dust extractor
unit, chip extrac-
tion connections,
push stick
Carbide-tipped
saw blade with
alternately bevel-
ground tips
(24 teeth), wheel
set incl. handles,
parallel stop,
angular guide,
table length
extension, chip
and dust extractor
unit, chip extrac-
tion connections,
push stick
Type TKHS 315 M - 3,4 DNB
TKHS 315 M - 4,2 DNB
Order no. 0103153200 0103153300
Table saw TKHS 315 M -
3,4 DNB
Table saw TKHS 315 M -
4,2 DNB
EQUIPMENT FEATURES Ideal for sawing beams, boards, sheets and wood-like materials
in the workshop and at construction sites
A chip and dust extractor unit or a wet-dry-vacuum cleaner can
be connected to the standard chip and dust extractor unit
Smooth running angular guide, can also be used as sliding
table
Sturdy parallel stop with eccentric clamp
Angular adjustment of saw blade continuously adjustable
Sturdy, powder-coated sheet steel design and galvanised
table-top
Foldable table length extension
Frame and motor pre-mounted
For three phase current
ACCESSORIES FOR THE TABLE SAWS
Supplementary tables
Order no.
Supplementary table For increasing the support surface;
ideal for cutting panels
Enables cuts on length stop up to
1,240 mm width
Height adjustable
Can be mounted at the side
Suitable for: TKHS 315 C
Length: 800 mm
Width: 600 mm
0910058860
Supplementary table For increasing the support surface;
ideal for cutting panels
With quick-action clamping elements,
scale and foldable support legs
Enables cuts on length stop
up to 1,240 mm width
Height adjustable
Can be mounted at the side
Suitable for: TKHS 315, TKHS 315 M
Length: 1.000 mm
Width: 660 mm
0910014030
Wheel Set
Order no.
Wheel Set For easy transportation
0910057154
Sliding table
Order no.
Sliding table Enables exact cuts, even on larger
workpieces
Precise sliding table on 6 ball
bearings
Complete with fence ruler, swivels
90-45°
Cutting width 90°/45°: 640 mm/930 mm
Overall length: 1.270 mm
Base weight: 24 kg
0910058967
Circular saw blades
Top cutting results thanks to teeth ground on
all sides and high accuracy of flatness and
concentric running
Tungsten carbide blades: Long service life
thanks to use of unmixed carbide
Can be reground repeatedly
Made in Germany
Material Dimensionsmm
Tooth pitch
Version Order no.
Chrome-vana-
dium steel
315 x 1,8 x 30 56 Peg tooth 0910000250
Chrome-vana-
dium steel
315 x 1,8 x 30 80 Tapered tooth 0910000195
Tungsten
carbide
315 x 2,8 x 30 20 Flat tooth,
Combo-secondary
hole holder
0910000314
Tungsten
carbide
315 x 3 x 30 24 Alternatively
bevel-ground tips
0910058851
Tungsten
carbide
315 x 2,8 x 30 48 Alternatively
bevel-ground tips,
Combo-secondary
hole holder
0910012282
Tungsten
carbide
315 x 2,8 x 30 84 Alternatively
bevel-ground tips
0910061500
WEL
DIN
G T
ECH
NO
LOG
YW
OO
D P
RO
CES
SIN
G
TEC
HN
OLO
GY
GR
IND
ING
MA
CH
INES
CO
MPR
ESS
ED A
IR S
YS
TEM
SW
ATE
R A
ND
PU
MP
TEC
HN
OLO
GY
238 |
BKS 400 - 4,2 DNB
BKS 400 - 3,1 WNB
Special advantages For single phase alternating current
For three phase current
Comparative device characteristicsTable size 660 x 1.000 mm 660 x 1.000 mm
Working height 850 mm 850 mm
Max. cutting width
- With ripping fence 335 mm 335 mm
- With additional table 1.335 mm 1.335 mm
Max. crosscut width
- With mitre fence 260 mm 260 mm
Cutting height 127 mm 127 mm
Saw blade Ø 400 x 30 mm Ø 400 x 30 mm
Motor protection Circuit breakers Circuit breakers
Motor brake Standard Standard
Rated input power 3,1 kW 4,2 kW
Output power 2 kW 2 kW
Weight 90 kg 90 kg
Standard equipment Carbide-tipped saw blade with flat trapezoid
tooth (28 teeth), parallel stop, mitre fence
with wedge type charge, table length
extension, protective cover, splitting wedge,
push stick
Carbide-tipped saw blade with flat trapezoid
tooth (28 teeth), parallel stop, mitre fence
with wedge type charge, table length
extension, protective cover, splitting wedge,
push stick
Type BKS 400 – 3,1 WNB BKS 400 - 4,2 DNBOrder no. 0190704009 0190704025
EQUIPMENT FEATURES Sturdy machine for professionals that can be used universally
Splash-proof
Exact parallel stop with eccentric clamp
Standard motor brake
Circuit breaker
Sawing table made of galvanised sheet steel
Large, sturdy and foldable table length extension
Sturdy, powder-coated frame sheet steel design, especially
torsion-resistant
Site circular saw BKS 400 - 3,1 WNB
Site circular saw BKS 400 - 4,2 DNB
SITE CIRCULAR SAWS
0190704017 (mounted) 0190704041 (mounted)
| 239
BKS 450 - 5,5 DNB
BKH 450 - 5,5 DNB
Special advantages Patented single lever height adjustment for
better adaptation to the material to be cut and
therefore for the cleanest cut and increased
safety
Longitudinal and cross beam on the table-top
for higher rigidity
Large, sturdy and foldable table length
extension
Comparative device characteristicsTable size 660 x 1.000 mm 660 x 1.000 mm
Working height 850 mm 850 mm
Max. cutting width
- With ripping fence 335 mm 335 mm
- With additional table 1.335 mm 1.335 mm
Max. crosscut width
- With mitre fence 260 mm 260 mm
Cutting height 141 mm 20 - 140 mm
Cutting speed 66 m/s
Saw blade Ø 450 x 30 mm Ø 450 x 30 mm
Motor protection Circuit breakers Circuit breakers
Motor brake Standard Standard
Rated input power 5,5 kW 5,5 kW
Output power 3,2 kW 3,2 kW
Weight 90 kg 90 kg
Standard equipment Carbide-tipped saw blade with flat trapezoid
tooth (32 teeth), parallel stop, mitre fence
with wedge type charge, table length
extension, protective cover, splitting wedge,
push stick, phase inverter
Carbide-tipped saw blade with flat trapezoid
tooth (32 teeth), parallel stop, mitre fence
with wedge type charge, table length
extension, protective cover, splitting wedge,
phase inverter, push stick
Type BKS 450 - 5,5 DNB BKH 450 -5,5 DNBOrder no. 0190704521 0104505503
EQUIPMENT FEATURES Sturdy machine for professionals that can be used universally
Splash-proof
Exact parallel stop with eccentric clamp
Standard motor brake
Circuit breaker
Sawing table made of galvanised sheet steel
Sturdy, powder-coated frame sheet steel design, especially
torsion-resistant
For three phase current
Site circular saw BKS 450 - 5,5 DNB
Site circular saw BKH 450 - 5,5 DNB with height adjustment
SITE CIRCULAR SAWS
... with height adjustment
0190704530 (mounted)
WEL
DIN
G T
ECH
NO
LOG
YW
OO
D P
RO
CES
SIN
G
TEC
HN
OLO
GY
GR
IND
ING
MA
CH
INES
CO
MPR
ESS
ED A
IR S
YS
TEM
SW
ATE
R A
ND
PU
MP
TEC
HN
OLO
GY
240 |
SITE CIRCULAR SAWS
ACCESSORIES FOR THE SITE CIRCULAR SAWS
Supplementary tables
Order no.
Supplementary table For large plates and long
workpieces
With quick-action
clamping elements, scale
and foldable support legs
Enables cuts on length
stop up to 1,360 mm
width
Height adjustable
Can be mounted on the
side or the rear
Suitable for: BKS 400,
BKS 450, BKH 450
Length: 1.000 mm
Width: 660 mm
0910006673
Wheel Set
Order no.
Wheel Set For easy transportation
For assembly on the machine stand
Suitable for: PK 255, BKH 450,
BKS 400, BKS 450
0910003313
Sliding table
Order no.
Sliding table Enables exact cuts,
even on larger
workpieces
Precise sliding table
on ball bearings
Complete with fence
ruler, swivels 90°-45°
Suitable for: BKH 450,
BKS 400, BKS 450
Cutting width 90°/45°:
610 mm/1.010 mm
Table size: 280 x 525 mm
Overall length: 1.500 mm
Base weight: 25 kg
0910006665
Chip extraction adapter nozzles
Order no.
Chip extraction adapter nozzles For connecting the site circular
saws to a chip and dust
extractor unit
Extraction adaptor nozzle Ø 100 mm
Suitable for: BKH 450
0910006690
Chip extraction adapter nozzles For connecting the site circular
saws to a chip and dust
extractor unit
Extraction adaptor nozzle Ø 100 mm
Suitable for: BKS 400, BKS 450
0910008749
Roller stands
For supporting long workpieces when sawing, milling,
planing and drilling
Sturdy, height-adjustable and foldable
Order no.
Roller stand RS 420 With smooth-rolling special steel
Rollers with a high load capacity
Width: 400 mm
Base weight: 100 kg
0910053353
Roller stand RS 420 G With smooth-rolling chromium-
plated ball bearings
Also permits lateral movements
Ideal for panel material
Width: 520 mm
Base weight: 100 kg
0910053345
Roller stand RS 420 W With smooth-rolling chromium-
plated ball bearings
Adjustable ball bearing gib
Also permits lateral movements
Ideal for panel material, round or
square workpieces
Width: 420 mm
Base weight: 100 kg
0910053361
Circular saw blades
Top cutting results thanks to teeth ground on
all sides and high accuracy of flatness and
concentric running
Tungsten carbide blades: Long service life
thanks to use of unmixed carbide
Can be reground repeatedly
Made in Germany
Material Dimensionsmm
Tooth pitch
Version Order no.
For BKS 400 Chrome-
vanadium steel
400 x 2,2 x 30 32 Peg tooth 0910008846
Chrome-
vanadium steel
400 x 2 x 30 56 Peg tooth 0910000276
Chrome-
vanadium steel
400 x 2 x 30 80 Tapered tooth 0910000217
Tungsten
carbide
400 x 3,5 x 30 28 Chamfered
flat tooth
0910007068
Tungsten
carbide
400 x 3,5 x 30 60 Alternatively
bevel-ground
tips
0910007084
For BKS 450 and BKH 450 Chrome-
vanadium steel
450 x 2,5 x 30 36 Peg tooth 0910008854
Tungsten
carbide
450 x 3,5 x 30 32 Chamfered
flat tooth
0910007076
Tungsten
carbide
450 x 3,8 x 30 66 Alternatively
bevel-ground
tips
0910007092
| 241
WEL
DIN
G T
ECH
NO
LOG
YW
OO
D P
RO
CES
SIN
G
TEC
HN
OLO
GY
GR
IND
ING
MA
CH
INES
CO
MPR
ESS
ED A
IR S
YS
TEM
SW
ATE
R A
ND
PU
MP
TEC
HN
OLO
GY
CIRCULAR SAW BLADES
Identification of saw blades What is the right number of teeth for which application?
Designation of the circular saw blades
WZ: Alternately bevel-ground tipsOld names:
KW: Combined alternating teeth
VW: Multiple alternating teeth
UW: Universal alternating teeth
Can be used for all wood and wood fibre
materials as well as for plastic and laminated
materials.
For solid wood lengthwise and crosswise to
the fibre, clamping and MDF boards – raw,
coated or veneered – plywood, composite
materials.
Easy to sharpen.
WZ 0°–5° neg.: Alternately bevel-ground tipswith negative chipping angle
For precise, fine cuts in solid wood,
MDF, strips, panels, aluminium, copper,
brass and plastic profiles.
FZ/TZ: Flat trapezoid toothFor aluminium, copper and brass profiles,
plastic, coated chipboards and MDF boards
FZ/TZ 5° neg.: Flat trapezoid toothwith negative chipping angle
Ideal for thin-walled aluminium, copper, brass
and plastic profiles and high-quality panels,
laminates and veneered boards
DZ/HZ: Roof hollow toothFor particularly clean cuts in coated and
veneered chipboards and MDF boards
FZ/FA: Chamfered flat topSite and table saws
For rough applications, construction wood,
walling boards, even with nails and concrete
remains, gas concrete, chipboards
FZ: Flat topsuitable for solid wood, longitudinal
and cross cuts, medium cutting quality
SP/NV: Crosscut bladeFor fine longitudinal/cross cuts in soft
and hard wood
KV: Peg toothFor rough, quick longitudinal
and cross cuts in soft wood
Low number of teeth: (e.g. Ø 200 – Z=16/Ø 300 – Z=28)For solid wood – soft, hard and laminated wood, longitudinal
and cross cuts, raw chipboard
Advantages: Medium cutting quality possible lengthwise
in solid wood, lower power consumption, fast feed,
low cutting force
Disadvantage: Only rough cutting quality possible in solid
wood diagonal to the fibre, coated and veneered chipboards
and MDF boards
Example:
HM 250 x 2,8/2,0 x 30; Z=80 FZ/TZ 5° neg; 2 NL
HM = tungsten carbide
Other material designations: CrV = chrome vanadium steel
CR = CV-reduced = low-noise
EL = electro steel
250 = diameter in mm
2,8 = cutting width in mm
2,0 = thickness of base body in mm
30 = bore diameter in mm
Z=80 = number of teeth
FZ/TZ = flat trapezoid tooth shape
5° neg. = negative chipping angle
2 NL = secondary hole holder
Medium number of teeth: (e.g. Ø 200 – Z=48/Ø 300 – Z=60)For solid wood types – soft wood, hard wood and laminated
wood, longitudinal cuts and cross cuts, chipboards - raw, coated
or veneered - MDF. Can only be used to a limited extent for
non-ferrous, plastic and hollow profiles and plastic.
Advantages: Wide range of use, good cutting results for
longitudinal and cross cuts, cutting quality better than with
low number of teeth
Disadvantage: Higher power consumption than a blade with
low number of teeth, does not achieve the cutting quality of the
high number of teeth
High number of teeth: (e.g. Ø 200 – Z=64/Ø 300 – Z=80)For solid wood types – cross cuts, construction wood,
chip boards - raw, coated or veneered - MDF, aluminium, copper,
brass and plastic profiles, laminated wood, longitudinal and
cross processing.
Advantages: Cuts without tears on the side that the blade cuts
into the workpiece, less tears on the side the blade cuts out
of than with medium number of teeth, especially with coated
or veneered chipboards and MDF panels
242 |
Top cutting results thanks to teeth ground on all sides and high
accuracy of flatness and concentric running
Carbide saw blades: Long service life thanks to use of pure carbide
Can be reground repeatedly
Made in Germany
CIRCULAR SAW BLADES
Material Diameter Pitch Type Suitable for machines Order no. x cutting width/thickness x bore mm
200 mm saw blades
HM 200 x 3/2 x 30 16 WZ Multi 180 until 2002 092 005 3963
HM 200 x 3/2 x 30 48 WZ Multi 180 until 2002 092 005 3971
HM 200 x 3/2 x 30 64 WZ Multi 180 until 2002 092 005 3980
205 mm saw blades
CrV 200 x 1,2/1,2 x 18 72 NV KS 205 until 1999 091 005 0044
HM 205 x 2,6/1,6 x 18 24 WZ KS 205 until 1999 091 005 0052
HM 205 x 2,6/1,6 x 18 64 WZ KS 205 until 1999 091 005 0060
210 mm saw blades
HM 210 x 1,8/1,4 x 30 24 WZ KS 210, KGS 255 091 005 8843
HM 210 x 2,4/1,6 x 30 30 WZ UK 220, PK 200 091 001 8965
HM 210 x 2,4/1,8 x 30 40 WZ 0° KS 210, KGS 255, UK 220, PK 200 091 005 1148
HM 210 x 2,4/1,6 x 30 42 WZ UK 220, PK 200 091 001 8973
HM 210 x 2,4/1,6 x 30 64 FZ/TZ 5° neg. KS 210, KGS 255 091 005 9823
HM 210 x 2,4/1,6 x 30 64 WZ UK 220, PK 200 091 001 8981
220 mm saw blades
HM 220 x 2,6/1,6 x 30 36 WZ secanta, UK 333 091 005 3540
HM 220 x 2,6/1,6 x 30 48 DZ/HZ secanta, UK 333 091 005 3558
HM 220 x 2,6/1,6 x 30 80 FZ/TZ 5° neg. secanta, UK 333 091 005 3566
250 mm saw blades with 20 mm bore
HM 250 x 3,2/2,2 x 20 48 DZ/HZ PK 250 until 1993 091 003 0884
HM 250 x 3,2/2,2 x 20 80 WZ PK 250 until 1993 091 000 0055
HM 250 x 2,8/2,2 x 20 80 FZ/TZ PK 250 until 1993 091 009 0063
250 mm saw blades with 30 mm bore
HM 250 x 3,2/3,2 x 30 14 WZ CONDOR PK 255, PKU 250, PKF 255 091 001 0212
PKF 255 V 8, Multi 260/310
HM 250 x 2,8/2 x 30 24 WZ 3° neg KS 250, KGS 301, KGS 303, KGS 331 091 003 0973
HM 250 x 2,8/2 x 30 24 WZ PK 255, PKU 250, PKF 255, 091 006 0368
PKF 255 V 8, Multi 260/310
HM 250 x 2,8/1,8 x 30 34 WZ 2NL KGT 500/501/550, PK 255, PKU 250, 091 003 0990
PKF 255, PKF 255 V 8, Multi 260/310
HM 250 x 2,8/1,8 x 30 42 WZ 2NL KGT 500/501/550, PK 255, PKU 250, 091 003 1015
PKF 255, PKF 255 V 8, Multi 260/310
HM 250 x 2,4/1,8 x 30 48 WZ 5° neg KS 250, KGS 301, KGS 303, KGS 331 091 003 1058
HM 250 x 2,6/1,6 x 30 48 DZ/HZ 2NL KGT 501, TS 250 091 003 1007
HM 250 x 2,8/2,2 x 30 48 DZ/HZ 2NL PK 255, PKU 250, PKF 255, 091 001 0166
PKF 255 V 8, Multi 260/310
HM 250 x 2,4/1,8 x 30 60 WZ 5° neg KS 250, KGS 301, KGS 303, KGS 331 091 003 0981
HM 250 x 2,8/1,8 x 30 60 WZ 2NL TS 250, PKU 250, PK 255, PKF 255, 091 003 1023
Multi 260, Multi 310
HM 250 x 3,2/2,2 x 30 60 WZ 2NL PK 255, PKU 250, PKF 255, 091 001 0182
PKF 255 V 8, Multi 260, Multi 310
HM 250 x 2,8/1,8 x 30 80 WZ 2NL KGT 500/501/550, TS 250, PKU 250, 091 003 1031
PK 255, PKF 255, Multi 260, Multi 310
HM 250 x 2,8/2 x 30 80 FZ/TZ 5° neg KGS 301/303/331, KGT 500/501/550, 091 003 1040
TS 250, PKU 250, PK 255, PKF 255,
Multi 260, Multi 310
Scoring saw blades, 88, 90 and 102 mm diameter
HM 88 x 3/2 x 30 8 FK PKU 250 091 006 0392
HM 90 x 2,8/2 x 30 10 FK 2NL PKF 255 V 8 091 006 2999
HM 90 x 3,2/2 x 30 10 FK 2NL PKF 255 V 8 091 005 2489
HM 102 x 3,6/2,8 x 22 20 TZ PKV 300 G until 1996 091 001 6377
FEATURES
| 243
WEL
DIN
G T
ECH
NO
LOG
YW
OO
D P
RO
CES
SIN
G
TEC
HN
OLO
GY
GR
IND
ING
MA
CH
INES
CO
MPR
ESS
ED A
IR S
YS
TEM
SW
ATE
R A
ND
PU
MP
TEC
HN
OLO
GY
CIRCULAR SAW BLADES
Material Diameter Pitch Type Suitable for machines Order no. x cutting width/thickness x bore mm
300 mm saw blades
HM 300 x 2,8/1,8 x 30 28 WZ KNL PK 300, PKV 300 G until 1996 091 001 4099
HM 300 x 2,8/1,8 x 30 48 WZ KNL PK 300, PKV 300 G until 1996 091 001 4110
HM 300 x 3,2/2,2 x 30 60 HZ KNL PK 300, PKV 300 G until 1996 091 001 4102
HM 300 x 2,8/1,8 x 30 72 WZ KNL PK 300, PKV 300 G until 1996 091 001 4129
HM 300 x 2,8/1,8 x 30 96 WZ KNL PK 300, PKV 300 G until 1996 091 001 4137
HM 300 x 2,8/2,2 x 30 96 FZ/TZ 6° neg KNL PK 300, PKV 300 G until 1996 091 001 4145
304 mm saw blades
HM 304 x 3,2/2,2 x 30 48 WZ 3° neg KS 304 091 005 3396
HM 304 x 3,2/2,2 x 30 64 WZ 3° neg KS 304 091 005 3400
305 mm saw blades
HM 305 x 2,4/1,8 x 30 60 WZ KGS 305 091 006 1470
HM 305 x 2,4/1,8 x 30 80 WZ KGS 305 091 006 1488
HM 305 x 2,8/2 x 30 96 FZ/TZ 5° neg KGS 305 091 006 1496
315 mm saw blades
CrV 315 x 1,8/1,8 x 30 56 KV TKHS 315 091 000 0250
CrV 315 x 1,8/1,8 x 30 80 NV TKHS 315 091 000 0195
HM 315 x 2,8/1,8 x 30 20 FZ KNL TKHS 315, KGT 300 091 000 0314
HM 315 x 3/2 x 30 24 WZ TKHS 315 091 005 8851
HM 315 x 2,8/1,8 x 30 48 WZ KNL TKHS 315 091 001 2282
HM 315 x 2,8/1,8 x 30 84 WZ KGS 305, KGT 300, TKHS 315 091 006 1500
350 mm saw blades
CrV 350 x 1,8/1,8 x 30 56 KV TK 350 until 1983 091 000 0268
CrV 350 x 1,8/1,8 x 30 80 NV TK 350 until 1983 091 000 0209
HM 350 x 2,8/1,8 x 30 22 FZ 2NL TK 350 until 1983 091 000 0322
355 mm saw blades for metal saws
HM 355 x 2,6/2,2 x 25 60 GZ = flat top MC 2000 until 1997 091 005 0222
with alternating bevel
400 mm saw blades
CR 400 x 2,2/2,2 x 30 32 KV BKS 400 091 000 8846
CrV 400 x 2/2 x 30 56 KV BKS 400 091 000 0276
CrV 400 x 2/2 x 30 80 NV BKS 400 091 000 0217
HM 400 x 3,5/2,5 x 30 28 FZ/FA 2NL BKS 400 091 000 7068
HM 400 x 3,5/2,5 x 30 60 WZ 2NL BKS 400 091 000 7084
450 mm saw blades
CR 450 x 2,5/2,5 x 30 36 KV BKS 450, BKH 450 091 000 8854
HM 450 x 3,5/2,5 x 30 32 FZ/FA 2NL BKS 450, BKH 450 091 000 7076
HM 450 x 3,8/2,8 x 30 66 WZ BKS 450, BKH 450 091 000 7092
500 mm saw blades
CrV 500 x 2,5/2,5 x 30 56 KV BW 500 until 1998 091 000 3437
HM 500 x 3,8/2,8 x 30 22 WZ 2NL BW 500 until 1998 091 000 3461
600 mm saw blades
CrV 600 x 2,8/2,8 x 30 56 KV BW 600 091 000 3445
HM 600 x 3,8/2,8 x 30 26 WZ BW 600 091 000 3470
700 mm saw blades
EL 700 x 3,2/3,2 x 30 56 KV BW 750, BW 700 until 1993 091 000 3399
CrV 700 x 3,2/3,2 x 30 56 KV BW 750, BW 700 until 1993 091 000 3453
HM 700 x 4,2/3,2 x 30 42 WZ BW 750, BW 700 until 1993 091 000 3488
Scroll saw blades, 135 length, set = 6 units
135 x 2 x 0,25 Wood, plastic DECU 400 until 1999 091 005 2888
Gypsum plaster
135 x 2 x 0,25 Wood, plastic DECU 400 until 1999 091 005 2896
Metal, gypsum
135 x 6 x 0,4 Wood DECU 400 until 1999 091 005 2900
135 x 6 x 0,4 Metal, foams DECU 400 until 1999 091 005 2918