Hospital Wide

Healthcare Display SolutionsDICOM Displays, Large Screen Displays and Projectors

THE WIDEST RANGE OF DISPLAY SOLUTIONS

For Complete Hospital Wide Installations

NEC offers a wide range of healthcare solutions that can help facilities improve performance and diagnostic accuracy and streamline care delivery through a wide range of display devices and systems.

As the leading manufacturer of innovative medical displays, NEC is your partner to deal with the challenges of hospital wide digitalization processes. NEC is able to offer the widest range of display products for any application.

Select from our medical displays, desktop monitors, large screen displays or projectors, secure in the knowledge that you have one point of contact and the highest standards of professionalism.

WHY DICOM? CONSISTENCY YOU CAN TRUST

Displays that conform to the DICOM Part 14 standard:

• Maximize the number of gray tones that can be perceived on the display • Provide a consistently high level of image quality across all DICOM

displays that aids the speed and accuracy of diagnosis

• Can normally be recalibrated to ensure on going lifetime conformance

The innovative Quick Screen QA test function* allows the monitor to display an internal test pattern similar to AAPM TG18-QC, without using an external signal source. A quick overall visual evaluation as well as a DICOM conformance measurement is done with the front sensor.

*Available on the MD210C2, MD211C2, MD211C3, MD211G3, MD242C2 and MD302C4

CONSISTENT IMAGING SOLUTIONS

Display Solutions In All Departments

Picture Archiving and Communication Systems (PACS) are increasingly replacing traditional film. In order to deal with the hospital-wide challenges of digitalization, NEC offers high-quality diagnostic monitors for displaying radiological images within radiology, coupled with a range of monitors able to view medical images at a high and consistent standard across all departments within a hospital.

From the emergency department to the multidisciplinary theater, be confident your display technology will meet the needs of the individual, the department and the hospital as a whole.

RADIOLOGY AND MAMMOGRAPHY

The quality of the display system is key to realizing all of the benefits of digital PACS. With NEC grayscale and color diagnostic MultiSync® MD Series displays and the included calibration software, you can be confident of quick, accurate and uniform diagnosis. Our leading 5MP grayscale display guarantees optimal image quality and performance for digital mammography.

OPERATING ROOM (OR) AND INTENSIVE CARE UNIT (ICU)

Critical areas, such as the operating room or intensive care units require extremely reliable display solutions to review medical images. In collaboration with our solution partners, NEC integrates large screen displays displays into high-end hygienic and medically approved displays and PC systems for ORs. NEC improves safety and efficiency in the OR with displays that are easy and quick to install, reducing downtime during installation.

ORTHOPEDICS

NEC large-screen DICOM displays exceed surgeons’ clinical requirements by displaying high-quality, life-size images of the part of the patient to be treated. Display leg and spine images without compromising on quality on our high-resolution screens in landscape or portrait format, to the DICOM standard. NEC displays are non-reflective, ensuring a clear view of the images, close up, from a distance and adjust to display the optimum image in high ambient light conditions.

PATHOLOGY

DICOM standard LCD displays provide an accurate means of radiographic examination of subtle bone pathology images. A DICOM standard LCD is a satisfactory replacement for “detail” x-ray screen-film. Our DICOM color MD Series displays and professional MultiSync P and PA Series provide an accurate viewing technology for digitized examination or review of organs, tissues, bodily fluids and whole bodies.

HOSPITAL-WIDE PACS

NEC is renowned for manufacturing more display solutions than any other brand; in the medical sector this means that we are able to provide total facility solutions and the comfort of single support points and consistent technologies that go with it.

Apart from a large range of conventional display products for administration, we offer DICOM medical displays from 20” to 30”, 40” to 70” DICOM large screen displays and professional DICOM projectors.

The hospital-wide rollout of PACS relies on monitors able to view medical images at a consistently high standard across all departments and consultation rooms within the hospital. Current challenging and innovative medical techniques rely on access to accurate information at all times. The information must be displayed in a manner that assists the best diagnosis through outstanding image clarity and helps prevent cross-department issues by maintaining uniform imaging through all departments.

PRIMARY DIAGNOSIS

MultiSync MD SeriesThese high end diagnostic displays ensure the highest level of image quality due to their high brightness, uniformity, contrast and full DICOM Part 14 compliance.

These diagnostic displays are designed to operate efficiently as well. Most models feature an integrated front sensor to constantly monitor the brightness of the display. Additionally the MD210C2, MD211C2 and MD211C3 color displays incorporate a tri-stimulus front sensor, which automatically maintains the stability of the white point for the usable life of the display, counteracting the natural aging of the product. The MD210C2, MD211C2 and MD211C3 also feature an instant-on LED backlight and a human presence sensor to allow the display to conserve power when not in use.

GammaCompMD QAThis software provides accurate DICOM Part 14 as well as backlight white point calibration and quality assurance procedures for standalone and network applications, making PACS hardware simpler and more cost-effective.

CLINICAL REVIEW

NEC offers several models ideal for clinical review usage, all with a recommended calibration setting of 180 cd/m2.

MultiSync MD Series Clinical ReviewThe unique Clinical Review models in the MultiSync MD Series feature medical certifications and an integrated front sensor and the Quick QA function, in addition to uncompromising imaging performance.

MultiSync 90, P and PA SeriesCurrent challenging and innovative medical techniques rely on access to accurate information at all times. These DICOM-calibratable professional monitors meet the highest reviewing expectations of departments like orthopedics, pneumology and intensive care.

Display Solutions For All Applications

Modern medical technology enables extremely complex examinations, but in the end, it is the radiologist who is responsible for fast and accurate diagnostic findings. To support these findings in a soft copy reading environment, LCD displays need to comply with the highest visual requirements. Their image quality has a decisive influence on diagnostic accuracy.

NEC is setting new standards with grayscale and color displays for filmless diagnostics, with technologies that are on the forefront in this market segment. All backed by years of experience in the development of LCD displays for professional use combined with intensive research done in the medical market.

The most difficult decision to make when deploying PACS or webPACS workstations to areas outside of radiology such as emergency, clinics, orthopaedics, ICU and ward, may be the type of display. In some areas, diagnosis needs to be made quickly and accurately from these displays. In other areas, displays are solely used for review. Matching your IT budget for displays without compromising on quality has until now been impossible.

NEC MultiSync MD, P and PA Series color displays have been designed with reliability, quality and affordability in mind. Unique, built-in firmware features (which you will not find in off-the-shelf or system-bundled LCDs) make the displays, which can be calibrated to the DICOM grayscale display function using NEC’s GammaCompMD™ QA software, ideal for all review/referral PACS and webACS applications.

NEC MultiSync® MD Series (Diagnostic)

Model Size Type Calibrated Brightness

MD211C2 (LED) 21.3” 2MP Color 400 cd/m2

MD211C3 (LED) 21.3” 3MP Color 400 cd/m2

MD211G3 21.3” 3MP Grayscale 400 cd/m2

MD215MG / MD211G5 (LED)

21.3” 5MP Grayscale Mammo

500 cd/m2

MD302C4 29.8” 4MP Color 180 cd/m2

NAVIGATION AND INFORMATION DISPLAYS

MultiSync P and PA SeriesThese displays are an excellent value upgrade to standard office monitors, offering hospital-wide DICOM compliant reviewing. MultiSync P and PA Series professional performance desktop displays are ideal for Hospital/Radiology Information System (HIS/RIS) applications or as third navigation displays on workstations. Featuring a built-in USB hub with DisplaySync Pro, these displays can offer additional flexibility to HIS/RIS workstations.

CONFERENCE AND EDUCATION

NEC DICOM simulation projection solutions are suited for meeting rooms or larger conference rooms. These DICOM simulation projectors can integrate in a PACS rollout.In addition to a DICOM preset mode, NEC P Series large-screen displays support unique DICOM calibration, making them ideal for viewing multiple X-ray images, MR scans, CT scans, etc. – side-by-side. A built-in option slot allows for the addition of a single board computer or other expansion devices.

HOSPITAL INFORMATION AND SIGNAGE

LargeScreen DisplaysAll hospital information for patients as well as visitors can be easily managed and viewed via NEC digital signage solutions. These models are available in up to 70” screen sizes and allow you to inform and communicate information at full HD resolution.

NEC Professional Color Displays (Clinical/DICOM-Capable)

Model Size Resolution BrightnessMD242C2 (LED) 24” (16x10) 1920x1200 350 cd/m2

MD302C4 (LED) 29.8” (16x10) 2560x1600 340 cd/m2

P232W-BK (LED) 23” (16x9) 1920x1080 250 cd/m2

P242W-BK (LED) 24” (16x10) 1920x1200 350 cd/m2

PA242W-BK (LED) 24.1” (16x10) 1920x1200 340 cd/m2

PA272W/-BK (LED) 27” (16x9) 2650x1440 340 cd/m2

PA302W/-BK (LED) 30” (16x10) 2650x1600 340 cd/m2

NEC Large Screen Displays (DICOM-Capable)

Model Sizes Type V Series 32”-65” 20x7, normal bezel,

commercial-grade, touch-capable

P Series 40”-70” 24x7, narrow bezel, professional-grade

X Series 46”-55” 24x7, ultra-narrow bezel, professional-grade, specialty

NEC Projectors (DICOM Simulation)

Model Brightness Type M Series 2700-3100

lumensXGA, WXGA, Short

Throw

UM Series 3300 lumens XGA, WXGA

P Series 3500-4200 lumens

XGA, WXGA

PA Series 5000-6000 lumens

XGA, WXGA, WUXA

PH Series 11,000 lumens WUXGA

NEC Display Solutions500 Park Boulevard, Suite 1100Itasca, IL 60143866-NEC-MORE

MultiSync is a registered trademark, and GammaCompMD is a trademark of NEC Display Solutions. All other brand or product names are trademarks or registered trademarks of their respective holders. Product specifications subject to change.©2013 NEC Display Solutions of America, Inc. All rights reserved. 25.NEC.80.GL.UN.099 rev 11.21.2013

We apply the same “no compromise” approach to our corporate responsibility and have for decades lead the way in environmental initiatives. Energy efficiency, better recycling, avoiding the use of toxic substances in the manufacturing process and an environmentally conscious corporate philosophy are central aspects at NEC Display Solutions. All of these initiatives have been consolidated in our Green Vision Campaign. Protecting our natural resources and the environment is one of our top priorities. In line with the NEC Corporation “Environmental Management Vision 2010,” NEC ensures that anything that impacts on the environment is sustainably reduced.

We have adopted directives, standards and voluntary initiatives that underlie the core issues: recycle, re-use and reduce, and thus contribute to establishing energy saving as the fifth energy source. NEC is committed to assisting our clients in understanding and measuring their environmental impact and how we can contribute to sustainably increasing energy efficiency and thus improving their carbon footprint. In addition to developing environmentally friendly technologies, materials and products, as well as environmentally sound concepts for every stage of a product’s life cycle, NEC is committed to protecting the environment.

Display Solutions that Don’t Cost the Earth