Upload
lydan
View
225
Download
0
Embed Size (px)
Citation preview
Designer and Manufacturer
of Cargo Restraint Systems
CARGO SYSTEMS DIVISION HEADQUARTERS
Ancra Cincinnati
2685 Circleport Drive
Erlanger, KY 41018
Fax: 1-800-347-2627
Phone Toll Free (U.S.): 1-800-233-5138
Phone Toll Free (Canada): 1-800-929-2627
Website: www.ancra.com
E-mail: [email protected]
Catalog No. 210D
CORPORATE HEADQUARTERS
Ancra International LLC4880 W. Rosecrans AvenueHawthorne, CA 90250Phone: 310-973-5000Phone Toll Free: 1-800-973-5092Fax: 310-973-3488
CARGO SYSTEMS DIVISION HEADQUARTERS
Ancra Cincinnati2685 Circleport DriveErlanger, KY 41018Fax: 1-800-347-2627Phone Toll Free (U.S.): 1-800-233-5138Phone Toll Free (Canada): 1-800-929-2627E-mail: [email protected]
WAREHOUSE/ SHIPPING FACILITIES
Ancra West4880 W. Rosecrans AvenueHawthorne, CA 90250U.S.A.
Ancra Cincinnati2685 Circleport DriveErlanger, KY 41018Fax: 1-800-347-2627Phone Toll Free: 1-800-233-5138
Website: www.ancra.com
© Ancra International 2006 Printed in U.S.A. 6/06
selected for performance and durability,
to offer you the most cost-effective,
reliable solutions.
You need to know.
When you choose Ancra cargo
restraint products, there’s safety in
numbers. Our capacity measurements
for components and assemblies are
the numbers that reflect dependable,
quality design and construction.
Throughout this catalog, these capacity
measurements will appear next to our
products. Their definitions offer you
even greater assurance that Ancra
systems are engineered with an
understanding of your requirements
and a commitment to your safety,
and to the success of your business.
When you’re on the road, the security
of having the best cargo restraint
system on your load means everything.
Ancra designs and manufactures
components and assemblies with your
security in mind. We make our products
from the finest quality materials, with
attention to every engineering detail.
Our webbing is constructed from
advanced performance nylon and
polyester, and our hardware is
specifically designed and manufactured
to meet your exacting requirements.
All component parts and materials are
Ancra InternationalThere’s strength in the name
Pacific NorthwestAccord Distributors9822 47th Avenue SWLakewood, WA 98499
CanadaGday Warehouse2150 Steeles Avenue, Unit 7Brampton, Ontario L6T 1A7
A strong past, a stronger future.
Ancra’s product line is based on more
than a quarter century of cargo restraint
manufacturing experience, accounting for
71 domestic and foreign patents and 51
product trademarks.
In 1996, the company was acquired
by The Heico Companies, LLC. Heico
companies have aggregate sales of more
than $2.7-billion dollars and an excep-
tional resource of professional services,
financial and insurance partners.
Backed by this solid organization,
Ancra—always a leader—now enjoys
even greater strength.
Congratulations. You’ve just opened the door to thebroadest line of cargo control products in the industry.Everything you’ll need for all your flatbed and interior vancargo requirements is just a phone call, fax or e-mail away.
This catalog – your one-stop shopping guide – is organized to save you time and effort. There are five majorproduct sections: flatbed; interior van; utility tiedowns;general hardware and webbing; and general information.Each section represents a specific product category andcontains the broadest assortment of products and relatedaccessories available anywhere. Color-coded pages ineach section help you find the desired category quickly.
A numerical index begins on page 57 and an alphabeti-cal index begins on page 60. If you know either the partnumber or the name of the product you need, you canquickly find the complete product specs.
Part numberingPart numbers are in bold face type followed by the pertinent technical specifications.
Payment optionsAuthorized distributors can now pay by check, moneyorder, VISA, MasterCard and American Express. You canopen a line of credit with us by contacting our customerservice department for a credit application. After the shortapproval process, you will be ready to place your order.
How to place an orderOur well-qualified customer service staff is happy to helpyou with any questions or any special requests. Customerservice can be reached toll free at 1-800-233-5138 or 1-800-929-2627 (from Canada). Orders can be faxed to 1-800-347-2627 or emailed to [email protected]. Electronicordering options are available as well.
WARNING: Read the warning and capacity rating information on
page 52. Failure to read all warnings, operating instructions and failure
to adhere to the capacity ratings (breaking strengths/working load limits)
could result in serious personal injury or cargo damage.
How to use this catalog
1
WinchesSilverCap™ Winches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4,5 SilverCap™ OverDrive™ Ratcheting Cap . . . . . . . . . . . . . . . . . .5 Web Winches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6,7Winch Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Lashing Winches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Combination Winches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Cable Winches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Winch Dimension Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9PortaWinch™ & PortaAnchor™ . . . . . . . . . . . . . . . . . . . . . . . . .10 Winch Bars & Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Tiedown Straps & Chain Assemblies Winch Strap Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . .11,12Ancra BLUE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Roll-On/ Roll-Off Container Straps . . . . . . . . . . . . . . . . . . . . . .13 GlideLock® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Transport Chain & Chain Load Binders . . . . . . . . . . . . . . . . . .15Ratchet Buckle Strap Assemblies . . . . . . . . . . . . . . . . . . . .16-18Ratchet Strap Replacements . . . . . . . . . . . . . . . . . . . . . . . . . .19
Web & AccessoriesCoil Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Corner Protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Web Protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Rubber Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Rubber Rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Rubber Rope Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Deck & Loading SystemsLift-A-Deck ® II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22, 23Retract-A-Roll ® II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24, 25
Logistic Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26, 27
Beams, Bars & Hoops Shoring & Decking Beams . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Decking Beam Hoops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Garment Beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29Beam Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29Shoring Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29Cargo-Sta ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Hoop Set for Cargo Sta ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Cargo-Sta Replacements . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32Jack Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Cargo Bar Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
AccessoriesTie Offs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Truck & Trailer Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Door Pull Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Transmat ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Tiedown Straps & AssembliesCam Buckle Strap Assemblies . . . . . . . . . . . . . . . . . . . . . . . . .34Ratchet Buckle Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Plate Trailer Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Torque Limiting Ratchet Assemblies . . . . . . . . . . . . . . . . . . . .36Custom Nets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Specialty Auto Tiedowns . . . . . . . . . . . . . . . . . . . . . . . . . .36, 37
Utility Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Mini Ratchet Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Qwik Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Strap Assemblies – Cam Buckle/Ratchet Buckle . . . . . . . . . .38 Ancra Lash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Packaged Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Buckles Ratchet Buckles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40, 41Overcenter Buckles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42Cam Buckles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43Roller Buckle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .433-Bar Slide Adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Attachment Hardware Wire Hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44Flat Hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45Snap Hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46Track Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47Chain Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Specialty Hardware Heavy Duty A/C Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49Heavy Duty Flanged A/C Track . . . . . . . . . . . . . . . . . . . . . . . .49Single Stud Track Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49Double Stud Track Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49Webbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Specifications/ Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52Industry Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53Replacement Criteria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55Index by Part Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57Index by Product Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
2
Table of ContentsFlatbed Solutions
Interior Van Solutions
General Hardware & Webbing
General Information
Utility Tiedowns
3
Ancra International presents the finest
quality, most reliable winches, tiedowns,
and strap and chain assemblies. They’re
designed to exceed the requirements of
industry regulatory organizations such as
Department of Transportation, California
Highway Patrol, and the Web Sling and
Tiedown Association. On the road, you’ll
appreciate our flatbed product benefits:
■ Long wearing heavy-duty steel
construction
■ Versatile products for secure use on
various applications
■ Weather-resistant load control straps
tested for strength
■ Specially engineered construction for
maximum durability
■ Quick and easy securement
■ Custom products for your
specific application
Flatbed Solutions
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Unless otherwise specified, all winches shown are right hand models. Left hand models are
available on special order.
4
Standard StoragePart No. 43573-10-RCWeight: 11.2 lbs./5.1 kg.WLL: 6,000 lbs.
Low ProfilePart No. 43579-20-RCWeight: 9.8 lbs./4.4 kg.WLL: 6,000 lbs.
Standard StoragePortable w/ 2SSPart No. 43564-12-RCWeight: 12.4 lbs./5.6 kg.WLL: 6,000 lbs.
Standard Storage3" SpoolPart No. 43573-12-RCWeight: 11.7 lbs./5.3 kg.WLL: 6,000 lbs.
Standard Storage4" SpoolPart No. 43573-13-RCWeight: 13.7 lbs./6.2 kg.WLL: 6,000 lbs.
Standard Storage2" SpoolPart No. 43573-11-RC Weight: 11.7 lbs./5.3 kg.WLL: 6,000 lbs.
Side Mount SilverCap™ Winches
StandardPart No. 43563-10-RCWeight: 10.6 lbs./4.8 kg.WLL: 6,000 lbs.
Standard Portablew/ 2SSPart No. 43564-14-RCWeight: 12.0 lbs./5.4 kg.WLL: 6,000 lbs.
Low Profile Portable w/2SSPart No. 43564-16-RCWeight: 11.5 lbs./5.2 kg.WLL: 6,000 lbs.
π
Winches
The world’s first ratcheting winchsaves time and helps prevent injury.With Ancra’s SilverCap™ Ratcheting Winch, you don’t have to remove thewinch bar until the load is secure. That can save you time while preventingwinch bar slippage or kick-back. Functioning just like a ratchet wrench,the SilverCap is one of those ideas that makes perfect sense, and youwonder why someone didn’t think of it sooner. Like other Ancra wincheswhich are some of the strongest in the industry, these new patented wincheshave a working load limit of 6,000 lbs. and a breaking strength of at least18,000 lbs. unless otherwise indicated. They comply with all DOT andCalifornia CHP regulations, WSTDA-T3 and Canadian Standard 905.
Silver Cap Winches are available in weld-on, sliding or portable mount models and are all powder coated to resist abrasion and rust. Forlongevity, the ratcheting mechanism is permanently sealed againstmoisture and road grime.
3-Bar Low ProfileSide Mount Part No. 48101-10-SG-RCSilver Zinc PlatingWeight: 14.5 lbs./6.6 kg.WLL: 6,000 lbs.
3-Bar StandardBottom Mount Part No. 48101-14-SG-RCSilver Zinc PlatingWeight: 15.9 lbs./7.2 kg.WLL: 6,000 lbs.
Winch Information
3-BarDesigned for easy strap
insertion during snow and
ice conditions. Prevents the
mandrel from freezing up.
PortableWinches can be placed any-
where along the trailer side
channel.
SpoolDesigned to reduce strap
wear, spool discs guide and
store the webbing into a single
roll up to 30’.
Standard Double CapIncremental adjustment
from both sides of the winch
allows for low clearance
applications.
SlidersAllow for easy positioning in
the track, but lock into place
when tension is applied to the
strap. Can also be welded for
fixed application. For use
with Ancra track 42357-11,
42357-21, 49242-10-120 or
equivalent.
3-Bar
Bottom Mount
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Standard BottomMount C TrackPart No. 43565-15-RCWeight: 11.5 lbs./5.2 kg.WLL: 6,000 lbs.
Deep StorageBottom Mount C TrackPart No. 43565-12-RCWeight: 12.2 lbs./5.5 kg.WLL: 6,000 lbs.
Part No. 43565-14-RC w/ Side WashersWeight: 12.6 lbs./5.7 kg.WLL: 6,000 lbs.
Winches
Bottom MountStandardPart No. 41681-10-RCWeight: 11.9 lbs./5.4 kg.WLL: 6,000 lbs.
Side Mount Low ProfilePart No. 43488-20-RC Weight: 11.8 lbs./5.4 kg.WLL: 6,000 lbs.
Sliders
Combination
SilverCap™ Winches
Leg Bracket LowProfile Part No. 43997-10-RCWeight: 9.4 lbs./4.3 kg.WLL: 5,500 lbs.
Standard Double LTrackPart No. 49207-13-RCWeight: 10.0 lbs./4.5 kg.WLL: 5,000 lbs.
Low Profile Double L Track Part No. 49207-18-RCWeight: 10.5 lbs./4.8 kg.WLL: 5,000 lbs.
Storable Double L TrackPart No. 49207-12-RCWeight: 10.8 lbs./4.9 kg.WLL: 5,000 lbs.
SilverCap™ OverDrive™ Ratcheting Cap
5
Grime Guard
Ancra’s Overdrive™ is the easy upgrade for welded-on winches and winches too new to replace. With a ratcheting winch, youwork faster and safer because the winch bar stays in the winchuntil the strap is tight.
To install on any existing winch: 1. Simply slide the OverDrive unit over the cap of the old winch,2. Spin it in place and 3. Secure it with the bolt. It’s that simple. All necessary parts are included.
Part No. 49723-10Weight: 3.45 lbs./1.56 kg.
Simple 1, 2, 3 installation.
SilverCap winchescome with a protectiveneoprene rubbersleeve that offers extraprotection againstmoisture and dirt
entering the ratcheting mechanism.
Winches
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Unless otherwise specified, all winches shown are right hand models. Left hand models are available on special order.
6
Bottom Mount
StandardPart No. 43563-10Weight: 9.1 lbs./4.1 kg.WLL: 6,000 lbs.
Standard StoragePart No. 43573-10Weight: 9.9 lbs./4.5 kg.WLL: 6,000 lbs.
Standard StoragePortable w/ 2SSPart No. 43564-12Weight: 11.1 lbs./5.0 kg.WLL: 6,000 lbs.
Standard Portablew/ 2SSPart No. 43564-14Weight: 10.7 lbs./4.9 kg.WLL: 6,000 lbs.
Standard Storage2" SpoolPart No. 43573-11Weight: 10.4 lbs./4.7 kg.WLL: 6,000 lbs.
Standard Storage3" SpoolPart No. 43573-12Weight: 10.5 lbs./4.77 kg.WLL: 6,000 lbs.
Standard Storage4" SpoolPart No. 43573-13 Weight: 12.4 lbs./5.6 kg.WLL: 6,000 lbs.
Standard Double CapPart No. 48783-10Weight: 10.2 lbs./4.6 kg.WLL: 6,000 lbs.
Side Mount
Web Winches
Low Profile Portable w/ 2SSPart No. 43564-16Weight: 10.1 lbs./4.6 kg.WLL: 6,000 lbs.
Low ProfilePart No. 43579-20Weight: 8.6 lbs./3.9 kg.WLL: 6,000 lbs.
3-Bar Low ProfileSide MountPart No. 48101-10Weight: 13.3 lbs./6.0 kg.WLL: 6,000 lbs.
3-Bar StandardBottom MountPart No. 48101-14Weight: 14.6 lbs./6.6 kg.WLL: 6,000 lbs.
Leg BracketPart No. 41691-10Weight: 6.3 lbs./2.9 kg.WLL: 5,500 lbs.
To maintain good
operating condition,
all moving parts
require periodic
inspection, cleaning
and lubrication.
Strongest in the Industry –When load securement is vital in your flatbed fleet,you can depend on Ancra winches, now thestrongest in the industry. Ancra winches meet a mini-mum breaking strength of 18,000 lbs. and workingload limit of 6,000 lbs. unless otherwise indicated. Theycomply with all DOT and California CHP regulations.They also comply with WSTDA-T3 and meet CanadianStandard 905. Made with different base configurationsto suit your various load requirements for flatbedapplications, Ancra winches also feature seamlesssolid-steel mandrels, high-strength alloy pawl pins andpowder coatings to resist abrasion and rust.
3-Bar
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT. 7
Sliders
Standard BottomMount C TrackPart No. 43565-15Weight: 10.3 lbs./4.7 kg.WLL: 6,000 lbs.
Deep StorageBottom Mount Part No. 43565-12Weight: 11.4 lbs./5.4 kg.WLL: 6,000 lbs.
StandardDouble Cap Part No. 43565-13Weight: 11.4 lbs./5.4 kg.WLL: 6,000 lbs.
StorableDouble L TrackPart No. 49207-12Weight: 9.5 lbs./4.3 kg.WLL: 5,000 lbs.
Part No. 49207-19
3-Bar w/ Side WashersWeight: 9.9 lbs./4.5 kg.WLL: 5,000 lbs.
StandardDouble L TrackPart No. 49207-13Weight: 8.1 lbs./3.7 kg.WLL: 5,000 lbs.
Standard SliderW Track Part No. 49706-10Weight: 14.7 lbs./6.7 kg.WLL: 6,000 lbs.
Low Profile Double L TrackPart No. 49207-18Weight: 9.3 lbs./4.2 kg.WLL: 5,000 lbs.
Low Profile SliderW TrackPart No. 49706-11Weight: 13.4 lbs./6.1 kg.WLL: 6,000 lbs.
Deep Storage w/ Side Washers C TrackPart No. 43565-14Weight: 11.8 lbs./5.4 kg.WLL: 6,000 lbs.
Ancra’s movable winches for versatile, dependable securement.
The lashing winch with double hex drive can be bolted or welded to the trailer like that of astandard, yet offers the quick release and easyoperation of a ratchet buckle.
Part No. 47640-30with double hex drive Weight: 3.9 lbs./1.8 kg.Breaking Strength Capacity: 11,000 lbs./5,000 kg.Working Load Limit: 3,666 lbs./1,666 kg.
Lashing Winches
Steel C TrackPart No. 42357-11Weight: 39.0 lbs./17.73 kg.Length: 6'
Aluminum C TrackPart No. 42357-21Weight: 19.0 lbs./8.64 kg. Length: 6'
Aluminum Double L TrackPart No. 49242-10-120Weight: 17.0 lbs./7.73 kg. Length: 10'
Ancra winch track is available in two distinct styles. Our Standard C track (42357) is available in both steel and aluminum and is designed for usewith our standard slider winches (43565-12 and 43565-15). Our newest style (49242-10-120) is our Double L aluminum track and is designed for our49207 Double L slider winch models. Steel track is constructed of roll-formed 1/4" plate steel. Aluminum track is available for aluminum trailers.Custom lengths are available upon request. Winch track should be installed to meet the testing requirements of TTMA RP No. 47-03. For installa-tion instructions, visit our web site www.ancra.com/truck/pdfs/winch_track_instl.pdf.
Winch Track
Winches
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.8
For cable applications, Ancra offers these popular models. Your cable selection must be consistentwith your cable manufacturer’s safe working load ratings.
Part No. 41696-10End Mount RHWeight: 15.4 lbs./7.0 kg.WLL: 5,500 lbs.
Part No. 41696-11 End Mount LHWeight: 15.4 lbs./7.0 kg.WLL: 5,500 lbs.
Part 41691-12Weight: 6.5 lbs./2.9 kg.WLL: 5,500 lbs.
WINCH FEATURES
• Winches are permanently
marked with working load
limit and our name to certify
quality.
• Smooth ground web slots
prevent web wear.
• All surfaces are mechanically cleaned,
blasted, dipped in an alkaline bath and
rinsed. The powder coating on Ancra
winches withstands 250 hours of standard
salt spray testing to ensure years of
service.
Ancra designs and manufactures all types of spe-
cialty winches to meet your special applications.
Call us with your special requirements.
End Mount
Ancra winches are made in a variety of configurations to fit any application thatrequires cable or up to 4” strap.
Combination Winches
StandardBottom Mount Part No. 41681-10Weight: 10.6 lbs./4.8 kg.WLL: 6,000 lbs.
Low ProfileSide Mount Part No. 43488-20 Weight: 10.9 lbs./4.9 kg.WLL: 6,000 lbs.
Recessed BoxPart No. 43908-10Weight: 12.9 lbs./5.9 kg.WLL: 5,500 lbs.
Low ProfileLeg BracketPart No. 43997-10Weight: 8.7 lbs./3.9 kg.WLL: 5,500 lbs.
2" WebPart No. 44466-10Weight: 9.4 lbs./4.3 kg.WLL: 6,000 lbs.
Cable Winches
Cable Leg Bracket
Winches
Though winches don’t actu-ally come in contact withthe load, their function oftightening and anchoringthe webbing or cable iscritical to the safety of over-the-highway cargo hauling.With their versatility, winchesand straps or cable can
secure nearly every kind and shape of load, and even allow periodictightening of the load as necessary. They operate in all types ofextreme weather and rarely fail. Yet in spite of their importance,winches are often neglected and abused.
To give the winches the care they deserve, a quick inspection before each use will insure they are undamaged and working properly.Damaged or non-operational winches should be replaced immediately.
For optimum performance, winches should be cleaned to remove dirt,mud, road salt, and ice. Lubrication ensures that gravity will allow thewinch pawl to drop freely into the sprocket teeth, and the sprocketwill rotate freely. When not it use, portable winches should becleaned and stored in a dry location. With a little care, your wincheswill go a long way.
SPROCKET
PAWL
LUBRICATION POINTS
MANDREL
Winch Maintenance
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Winch Dimensions (inches)
9
A
B
D
C
FRAME
CAPMANDREL
PAWL PIN
PAWL
SPROCKET
Winches are labeledwith installation,maintenanceand use instructions.
Winch Dimensions
Ancra Part No. A B C D
Overall Spool Frame Frame Width Width Height Depth
41681-10 9.75 6.82 5.38 3.50
41681-10-RC 10.75 6.82 5.38 3.50
41691-10 7.55 4.75 3.90 5.00
41691-12 7.55 4.75 3.90 5.00
41696-10 7.25 4.50 10.00 4.00
41696-11 7.25 4.50 10.00 4.00
43488-20 10.05 7.25 4.07 4.00
43488-20-RC 11.06 7.25 4.07 4.00
43563-10 7.49 4.63 5.31 3.50
43563-10-RC 8.49 4.63 5.31 3.50
43564-12 7.55 4.63 6.19 3.50
43564-12-RC 8.58 4.63 6.19 3.50
43564-14 7.49 4.63 5.31 3.50
43564-14-RC 8.49 4.63 5.31 3.50
43564-16 7.49 4.75 4.07 4.00
43564-16-RC 8.49 4.75 4.07 4.00
43565-12 7.59 4.63 6.64 4.00
43565-12-RC 8.59 4.63 6.64 4.00
43565-13 9.33 4.63 6.00 4.50
43565-14 7.59 4.63 6.64 4.00
43565-14-RC 8.59 4.63 6.64 4.00
43565-15 7.59 4.63 6.00 4.00
43565-15-RC 8.59 4.63 6.00 4.00
43573-10 7.55 4.63 6.19 3.50
43573-10-RC 8.58 4.63 6.19 3.50
43573-11 7.55 2.25 6.19 3.50
43573-11-RC 8.58 2.25 6.19 3.50
43573-12 7.55 3.25 6.19 3.50
43573-12-RC 8.58 3.25 6.19 3.50
43573-13 7.55 4.12 6.19 3.50
43573-13-RC 8.58 4.12 6.19 3.50
43579-20 7.49 4.75 4.07 4.00
43579-20-RC 8.49 4.75 4.07 4.00
43908-10 10.00 7.25 5.60 5.00
43997-10 9.95 7.25 3.90 5.00
43997-10-RC 10.95 7.25 3.90 5.00
44466-10 7.61 4.63 5.31 3.50
47640-30 6.13 2.12 3.80 2.95
48101-10 10.00 6.00 4.25 4.00
48101-10-SG-RC11.00 6.00 4.25 4.00
48101-14 10.00 6.00 5.50 4.00
48101-14-SG-RC11.00 6.00 5.50 4.00
48783-10 9.25 4.63 5.31 3.50
49207-12 7.59 4.74 6.52 3.95
49207-12-RC 8.58 4.74 6.52 3.95
49207-13 7.59 4.74 5.91 3.95
49207-13-RC 8.59 4.74 5.91 3.95
49207-18 7.59 4.75 5.25 3.95
49207-18-RC 8.59 4.75 5.25 3.95
49207-19 7.59 4.74 6.52 3.95
49706-10 9.00 4.88 7.00 4.50
49706-11 8.75 4.88 6.00 4.50
Ancra Part No. A B C D
Overall Spool Frame Frame Width Width Height Depth
A
Standard SilverCap™
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
PortaWinch & PortaAnchor
Ancra’s PortaWinch and PortaAnchor products turn stan-dard stake pockets into solid anchor points for securementstraps. You can position the hold-down straps anywherealong either side or front and back of the trailer using thestake pockets that best accommodate your load.
You no longer have to deal with clamp-on winches that can vibrate loose or relying on ratchet straps that just can’tapply the amount of tension you can get with a winch andwinch bar. Fully FMCSA compliant, the PortaAnchor offersa legal solution for a DOT secure anchor point.
Turn stake pockets into strap anchor points.
■ Secure anchor straps securely and legally.
■ Working Load Limit (WLL) 5,500 lbs./2,495 kg.
■ Uses standard 4" straps, chain and winch bar.
■ Fits all stake pockets.
■ Installs easily without tools.
■ Works over tires and toolboxes.
■ Removable when not in use.
Versatile solutions for securing flatbed cargo.
Installs easily with patented spring-loaded fronthook design that distributes the load evenlyacross the stake pocket.
Cap has four holes and accommodates standard winch bars.
Also available in SilverCap Ratcheting Capmodels 49716-10-RC and 49716-11-RC.
PortaAnchor accepts chain and hook loadassemblies, 4-in.web straps with flat hooks andweb straps with chain anchors or web hooks.
PortaWinch
PortaAnchor
Part No. 49717-10Standard outward off-setWeight: 8.9 lbs./4.0 kg.Working Load Limit (WLL) 5,500 lbs.
Part No. 49717-11Inward off-set to allow fortrack-mounted tarp clearanceWeight: 8.9 lbs./4.0 kg.Working Load Limit (WLL) 5,500 lbs.
Part No. 49716-10Standard outward off-setWeight: 11.5 lbs./5.2 kg.Working Load Limit (WLL) 5,500 lbs.
Part No. 49716-11Inward off-set to allow fortrack-mounted tarp clearanceWeight: 11.5 lbs./5.2 kg.Working Load Limit (WLL) 5,500 lbs.
&
10
Part No.49716-10
Part No.49716-11
Part No.49717-10
Part No.49717-11
Winch Strap Assemblies
Standard PaintedPart No. 42313-10 Weight: 5.0 lbs./2.27 kg.
Standard ChromePart No. 42313-17 Weight: 5.0 lbs./2.27 kg.
Ancra Winch Strap Assemblies team heavy duty, wear- andweather-resistant load control straps with strong, dependablehardware to meet the demanding conditions of flatbed operations. Ancra straps meet California Highway Patrolspecifications and are tested for strength and durability. They can be supplied with a loop end for permanent attach-ment to truck winch mandrels. Meets or exceeds WSTDA T-1standard specifications for synthetic web tiedowns.
2" Winch Strap Assemblies Breaking strength 10,000 lbs./4,545 kg.; WLL 3,333 lbs./1,515 kg. using 41632-13 Webbing
Part No. 41659-10-27 2-in. x 27-ft. Winch Strap w/40891-18 Flat Hook
Part No. 41659-10-30 2-in. x 30-ft. Winch Strap w/40891-18 Flat Hook
Part No. 41659-11-27 2-in. x 27-ft. Winch Strap w/40978-11 Delta Ring
Part No. 41659-11-30 2-in. x 30-ft. Winch Strap w/40978-11 Delta Ring
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT. 11
Winch Accessories
Corner Iron HookPart No. 44122-10Constructed with no sharpcorners to reduce abrasionto rope or cable.Weight: .63 lb./.29 kg.
Web WinderPart No. 45801-10Constructed of all steel, the Ancra Web Winder winds 2-in.,3-in. and 4-in. webbing binders for compact storage. Easyto attach to truck rails, easy to remove with tapered forks,and easy to disassemble for storage. Weight: 3.25 lbs./1.48 kg.
H-2 HookPart No. 44102-11Flame-cut from 5/8-in. material and can bewelded flat on trucks. Accepts web loops,D-rings, cable or rope. Meets CHP anchor-age requirements when properly secured.Weight: .61 lb./.28 kg.
Winch Bars & Accessories
Tapered and angled at the end for easy operation, Ancra’s34-inch Winch Bars are knurled at two sections and the tip isgrooved to improve grip in the winch. They are heat-treatedfor extra strength, cycle tested to simulate years of heavyuse and proof loaded during manufacturing. To be used torelease chain load binders as well as tension winches. Not tobe used as a cheater bar to tension load binders.
Combination Box End PaintedPart No. 42313-12 Weight: 6.5 lbs./2.95 kg.
Combination PaintedPart No. 42313-20 Weight: 6.5 lbs./2.95 kg.
Combination ChromePart No. 42313-19 Weight: 6.5 lbs./2.95 kg.
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
4" Winch Strap Assemblies Breaking strength 16,200 lbs./7.363 kg.; WLL 5,400 lbs./2.454 kg. using 43797-12 Webbing
Part No. 43795-13-27 4-in. x 27-ft. Winch Strap w/Half Twisted LoopPart No. 43795-13-30 4-in. x 30-ft. Winch Strap w/Half Twisted Loop
Part No. 43795-14-27 4-in. x 27-ft. Winch Strap w/43365-12 Grab HookPart No. 43795-14-30 4-in. x 30-ft. Winch Strap w/43365-12 Grab Hook
Part No. 43795-15-27 4-in. x 27-ft. Winch Strap w/43366-14 Chain AnchorPart No. 43795-15-30 4-in. x 30-ft. Winch Strap w/43366-14 Chain Anchor
Winch Strap Assemblies
12
Part No. 43795-10-27 4-in. x 27-ft. Winch Strap w/41766-18 Flat HookPart No. 43795-10-30 4-in. x 30-ft. Winch Strap w/41766-18 Flat Hook
Part No. 43795-11-27 4-in. x 27-ft. Winch Strap w/41631-11 Delta RingPart No. 43795-11-30 4-in. x 30-ft. Winch Strap w/41631-11 Delta Ring
Putting a half twist in a tiedown
strap will reduce vibration and
extend the life of the fabric.
Winch Strap Tip
3" Winch Strap Assemblies Breaking strength 16,200 lbs./7,363 kg.; WLL 5,400 lbs./2,452 kg. using 41632-14 Webbing
Part No. 41660-10-27 3-in. x 27-ft. Winch Strap w/41766-18 Flat HookPart No. 41660-10-30 3-in. x 30-ft. Winch Strap w/41766-18 Flat Hook
Part No. 41660-11-27 3-in. x 27-ft. Winch Strap w/45516-12 Delta RingPart No. 41660-11-30 3-in. x 30-ft. Winch Strap w/45516-12 Delta Ring
Part No. 41660-13-27 3-in. x 27-ft. Winch Strap w/43365-12 Grab HookPart No. 41660-13-30 3-in. x 20-ft. Winch Strap w/43365-12 Grab Hook
Part No. 41660-14-27 3-in. x 27-ft. Winch Strap w/43366-14 Chain AnchorPart No. 41660-14-30 3-in. x 30-ft. Winch Strap w/43366-14 Chain Anchor
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Premium & Specialty Strap Assemblies
Introducing AncraBLUE—the ultimate inwebbing strength andperformance.Ancra, well-known for high-performance cargo restraintproducts, has raised the bar with this new high-strengthwebbing.
This 24,000 lb. webbing dramatically improves facial abrasion resistance and gives webbing more body and firmness.Ancra BLUE also delivers 70% retained strength after 2,500 fullcycles for a durability rating that is like everything else about thisproduct—superior.
For added versatility, the flat hook strap is made with Ancra’s
3.25-inch flat hook, which allows it to fit through any stakepocket, a rated anchor point, providing a stronger attachmentlocation for even greater holding power.The next time you require the industry’s most durable, mostwear-resistant winch strap, think blue, Ancra BLUE.
Part No. 43795-80-304-in. x 30-ft. Winch Strapw/41766-18 Flat Hook
Part No. 43795-80-274-in. x 27-ft. Winch Strapw/41766-18 Flat Hook
Part No. 49526-10 4-in. x 5-ft. Strap with 48968-11Container HookWorking Load Limit: 5,400 lbs./2,454 kg.
Part No. 43795-81-304-in. x 30-ft. Winch Strap w/41631-11 Delta Ring
Part No. 43795-83-304-in. x 30-ft. Winch Strap w/Half Twisted Loop
Part No. 43795-85-304-in. x 30-ft. Winch Strap w/43366-14 Chain Anchor
13
Roll-On/Roll-Off Container Straps
Here’s the easy way to secure roll-on and roll-off containers during transit. Ancra containerstraps are compatible with all standard roll-on/roll-off containers and meet FMCSARegulation Section 393.134 Sect. (3).
Breaking strength 16,200 lbs./7,363 kg.; WLL 5,400 lbs./2,454 kg. using 41632-33 Webbing
Custom lengths and webbing configurations available (loops for bolts).
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Heavy Duty 1/4" steel sheet per ASTM A36
Part No. 49344-12 Weight: 15.63 lbs./7.09 kg.
Light DutyPart No. 49344-10 Weight: 5.7 lbs./2.60 kg., Metal Gauge: 10
Our coil racks are of one-piece construction for extra support, handling both heavy
and light duty applications. Used with lumber blocks which provide extra cradling
of the coils. Both have a black lacquer finish.
New D.O.T. standards specifically address securement of metal coils. If chocks
are used, they must be held in place by coil bunks or racks to prevent them from
coming loose.
33"
2.8"
40.0"
2.7" 2.75" 4.0"
35.0"
1.66"
Ancra presents GlideLock, an efficient and economical way to meetthe latest Federal Motor Carrier Safety Administration (FMCSA) stan-dards for fleets operating flatbed trailers with either, trailer rails, double Ltrack or standard C winch track.
As the name implies, it glides into any position along the trailer railor winch track to ensure the correct pull-angle for securing the cargo,while keeping the strap inboard of the rub rails and fastened againstcoming loose as the standard requires. Once in place, it locks the winchstraps in place for safe securement of the load. It works with any standardflat hook strap.
Load Securement Products
GlideLock works in four easy steps.
1. Slide the unit onto the trailer rails or winch track.2. Glide it to the correct position to insure a correct
pull-angle.3. Release the keeper to allow the flat hook to
engage the GlideLock.4. Secure the keeper to lock the flat hook in position.
Once in place, the hook can’t shift or come undone. Ideal for trailers equipped with trailer rails, double L track or standard C winch track and slider winches.
GlideLock is the economical way to bring your fleetinto compliance.
• Allows adjustable anchor points for flat hook winch straps.
• Captures the flat hook on winch straps.
• Attaches to double L track (49242-10-120) or Ancra standard winch track (42357-11 or -21). See page 5 and 7 for slider winches and track.
• Meets new FMCSA standards for cargo securement regarding rub rails.
• 5,400 lbs. Working Load Limit, 16,200 lbs. Breaking Strength
• Corrosion resistant 6,000 series aluminum alloy T-6
Part No. 49527-10 GlideLock for Double L TrackBreaking Strength: 16,200 lbs. /7,348 kg.Working Load Limit: 5,400 lbs./2,449 kg.Weight: 4.50 lbs./2.04 kg.
Part No. 49527-13 GlideLock for Standard C Winch TrackBreaking Strength: 16,200 lbs./7,348 kg.Working Load Limit: 5,400 lbs./2,449 kg.Weight: 4.50 lbs./2.04 kg.
14
Sliding Load-Securement Bracket
Coil Rack
26.5"17.0"
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Chain Assemblies with Clevis HooksPart No. 45881-10-16 5/16-in. x 16-ft. Working Load Limit: 4,700 lbs. Weight: 17.40 lbs./7.89 kg.Part No. 45881-10-20 5/16-in. x 20-ft. Working Load Limit: 4,700 lbs. Weight: 21.70 lbs./9.90 kg.Part No. 45881-10-25 5/16-in. x 25-ft. Working Load Limit: 4,700 lbs. Weight: 26.70 lbs./12.10 kg.Part No. 45881-11-16 3/8-in. x 16-ft. Working Load Limit: 6,600 lbs. Weight: 17.80 lbs./8.07 kg.Part No. 45881-11-20 3/8-in. x 20-ft. Working Load Limit: 6,600 lbs. Weight: 22.20 lbs./10.10 kg.Part No. 45881-11-25 3/8-in. x 25-ft. Working Load Limit: 6,600 lbs. Weight: 27.20 lbs./12.40 kg.Part No. 45881-13-20 1/2-in. x 20-ft. Working Load Limit: 11,300 lbs. Weight: 53.60 lbs./24.31 kg.Part No. 45881-13-25 1/2-in. x 25-ft. Working Load Limit: 11,300 lbs. Weight: 66.20 lbs./30.01 kg.
Chain & BindersAncra Chain Load Binders are all steel, drop-forged, and meet FMCSA and DOT specifications. Versatile and adjustable,these load binders offer heavy-duty transport securement. All are Grade 70 short link transport chain and meet the standards for welded steel chain as specified by the National Association of Chain Manufacturers (NACM).
15
Transport Chain & Chain Load Binders
Lever Chain Load BinderPart No. 45943-10 5/16-in. Load Binder with Lever Accepts chain from 5/16-in. up to 3/8-in.
Working Load Limit: 5,400 lbs. Weight: 8.0 lbs./3.64 kg.
Part No. 45943-11 3/8-in. Load Binder with Lever Accepts chain from 3/8-in. up to 1/2-in.Working Load Limit: 9,200 lbs. Weight: 13.0 lbs./5.91 kg.
Part No. 45943-13 1/2-in. Load Binder with Lever Accepts chain from 1/2-in. up to 5/8-in.Working Load Limit: 13,000 lbs. Weight: 19.6 lbs./8.9 kg.
Recoilless Chain Load Binder w/LeverPart No. 45943-14 5/16-in. Load Binder with Lever Accepts chain from 5/16-in. up to 3/8-in.
Working Load Limit: 5,400 lbs. Weight: 9.25 lbs./4.21 kg.
Chain also available in bulkPart No. 45880-10 5/16-in, 400-ft length Weight: 408 lbs./185 kg.Part No. 45880-11 3/8-in, 200-ft length Weight: 248 lbs./112 kg.Part No. 45880-13 1/2-in, 100-ft length Weight: 251 lbs./114 kg.
Clevis Hook (for hook dimensions see page 48)
Part No. 45946-10 5/16" Clevis Hook Weight: .85 lb./.39 kg.Part No. 45946-11 3/8" Clevis Hook Weight: 1.10 lbs./.50 kg.Part No. 45946-13 1/2" Clevis Hook Weight: 2.29 lbs./1.04 kg.
Ratchet Chain Load BinderPart No. 45943-20 5/16-in. Load Binder with Ratchet Accepts chain from 5/16-in. up to 3/8-in.
Working Load Limit: 5,400 lbs. Weight: 11.0 lbs./5.0 kg.
Part No. 45943-21 3/8-in. Load Binder with Ratchet Accepts chain from 3/8-in. up to 1/2-in.Working Load Limit: 9,200 lbs. Weight: 13.5 lbs./6.14 kg.
Part No. 45943-23 1/2-in. Load Binder with Ratchet Accepts chain from 1/2-in. up to 5/8-in.Working Load Limit: 13,000 lbs. Weight: 14.3 lbs./6.5 kg.
Floor Chain TiedownPart No. 49345-10Breaking Strength:
18,000 lbs.Working Load Limit:
6,000 lbs.Weight: 5.60 lbs./2.55 kg.
Part No. 49583-10Breaking Strength:
18,000 lbs.Working Load Limit:
6,000 lbs.Weight: 5.25 lbs./2.38 kg.
45982-10 27-ft. Ratchet Strap w/40891-18 Flat Hooks45982-11 30-ft. Ratchet Strap w/40891-18 Flat Hooks
45982-16 27-ft. Ratchet Strap w/40978-11 Delta Rings45982-35 30-ft. Ratchet Strap w/40978-11 Delta Rings
45982-14 27-ft. Ratchet Strap w/43365-12 Grab Hooks45982-33 30-ft. Ratchet Strap w/43365-12 Grab Hooks
45982-15 27-ft. Ratchet Strap w/43366-12 Chain Anchors45982-34 30-ft. Ratchet Strap w/43366-12 Chain Anchors
45982-19 27-ft. Ratchet Strap w/40758-11 Twisted Snap Hooks
45982-36 30-ft. Ratchet Strap w/40758-11 Twisted Snap Hooks
45982-42 27-ft. Ratchet Strap w/43120-13 Wire Hooks 45982-43 30-ft. Ratchet Strap w/43120-13 Wire Hooks
Ratchet Strap Assemblies
Engineered for strength and durability, Ancra ratchet bucklestrap assemblies set the industry standard. The integrity of ourpatented ratchet buckles set these assemblies apart from therest. A complete line of Ancra’s standard and heavy-dutyassemblies and accessories can meet all of your specificrequirements.
Our ratchet buckle strap assemblies offer:
■ Custom lengths with a range of end hardware for wide ranging applications
■ Compliance with current Department of Transportation (DOT), California Highway Patrol (CHP) and WSTDA T-1 Standards
■ Webbing meets or exceeds WSTDA T-4 standards
Standard Flat Hook
Delta Ring
Chain Anchor
Grab Hook Anchor
Snap Hook
Wire Hook
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
2” Ratchet Buckle Straps using 41632-13 webbing with Long-Wide Handle Ratchet Buckle 44587-10
16
Breaking Strength Capacity: 10,000 lbs./4.545 kg. Working Load Limit: 3,333 lbs./1,515 kg.
17
Part No. 47970-1027-ft. Ratchet Strap w/40891-18 Flat Hooks
Part No. 47970-1130-ft. Ratchet Strap w/40891-18 Flat Hooks
Part No. 47971-1027-ft. Ratchet Strap w/40891-18 Flat Hooks
Part No. 47971-1130-ft. Ratchet Strap w/40891-18 Flat Hooks
Part No. 48987-2027-ft. Ratchet Strap w/41766-18 Flat Hooks
Part No. 48987-2130-ft. Ratchet Strap w/41766-18 Flat Hooks
Part No. 48987-2227-ft. Ratchet Strap w/43365-12 Grab Hooks
Part No. 48987-2330-ft. Ratchet Strap w/43365-12 Grab Hooks
Part No. 48987-2427-ft. Ratchet Strap w/43366-14 Chain Anchors
Part No. 48987-2530-ft. Ratchet Strap w/43366-14 Chain Anchors
Flat Hook
Flat Hook
Flat Hook
Grab Hook
Chain Anchor
2" Ratchet Buckle Straps using 41632-13 Webbing with Short-Wide Handle Ratchet Buckle 47105-11
2" Ratchet Buckle Straps using 41632-13 Webbing with Standard Handle Ratchet Buckle 44627-11
Breaking Strength Capacity: 10,000 lbs./4,545 kg.
Working Load Limit: 3,333 lbs./1,515 kg.
Breaking Strength Capacity: 10,000 lbs./4,545 kg.
Working Load Limit: 3,333 lbs./1,515 kg.
Breaking Strength Capacity: 15,000 lbs./6,818 kg.
Working Load Limit: 5,000 lbs./2,272 kg.
Breaking Strength Capacity: 15,000 lbs./6,818 kg.
Working Load Limit: 5,000 lbs./2,272 kg.
Breaking Strength Capacity: 15,000 lbs./6,818 kg.
Working Load Limit: 5,000 lbs./2,272 kg.
3" Ratchet Buckle Straps using 41632-14 Webbing with Ratchet Buckle 48965-10
Ratchet Strap Assemblies
Ancra’s green handle ratchetbuckle – a symbol of qualityrecognized worldwide.
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
All Ancra ratchet straps and replacementstraps shown (pages 17-19)
use 6,000 lbs. per inch, double line webbing to insure full WLL capacity.
Ratchet Strap Assemblies
Part No. 49346-1427-ft. Ratchet Buckle Strap w/43366-14 Chain Anchor
Part No. 49346-1530-ft. Ratchet Buckle Strap w/43366-14 Chain Anchor
Part No. 49346-1627-ft. Ratchet Buckle Strap w/41631-11 Delta Ring
Part No. 49346-1730-ft. Ratchet Buckle Strap w/41631-11 Delta Ring
Chain Anchor
Delta Ring
Breaking Strength Capacity: 16,200 lbs./7,363 kg.
Working Load Limit: 5,400 lbs./2,454 kg.
Breaking Strength Capacity: 20,000 lbs./9,090 kg.
Working Load Limit: 6,666 lbs./3,030 kg.
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Part No. 49346-1027-ft. Ratchet Buckle Strap w/41766-18 Flat Hooks
Part No. 49346-1130-ft. Ratchet Buckle Strap w/41766-18 Flat Hooks
Part No. 49346-1227-ft. Ratchet Buckle Strap w/43120-20 Narrow Wire Hooks
Part No. 49346-1330-ft. Ratchet Buckle Strap w/43120-20 Narrow Wire Hooks
Flat Hook
Wire Hook
4" Ratchet Buckle Straps using 4" polyester webbing with Ratchet Buckle 49349-10
Breaking Strength Capacity: 16,200 lbs./7,363 kg.
Working Load Limit: 5,400 lbs./2,454 kg.
Breaking Strength Capacity: 20,000 lbs./9,090 kg.
Working Load Limit: 6,666 lbs./3,030 kg.
FIXED END HOOK WEBBINGBUCKLE
ADJUSTABLE END HOOK
OVERALL LENGTH
FIXED LENGTH
Length: The distance between extreme end bearing points of the web
tiedown assembly, including the fittings. Standard fixed end length is 18"
(33" for chain anchor straps). This puts ratchet in optimum position on side
of trailer for driver tensioning. Handholds are typically 6" in length and can be sewn to prevent the
webbing from sliding back through the buckle or winch.
ANATOMY OF ARATCHET STRAP
To make sure Ancra quality is delivered to the customer intact, ourstrap assemblies are individually banded, load bars are shipped
on custom pallets and shipping cartons are 275 lbs. test.
To prevent unrated strap assemblies,Ancra uses high-quality fabric
warning labels that are durable andtear-resistant.
18
19IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.
REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Ratchet Strap Replacements
For 2"x27' & 2"x30' Ratchet Strap Assemblies
For 4"x27' & 4"x30' Ratchet Strap Assemblies
For 3"x27' & 3"x30' Ratchet Strap Assemblies
Flat Hook
Wire Hook
Chain Anchor
Delta Ring
Grab Hook
Part No. Description Replacement for:
48922-10 2" x 18" Fixed end strap w/40891-18 Flat hook & loop end 45982-10 & -11, 47970-10 & -11, 47971-10 & -1148922-13 2" x 18" Fixed end strap w/43120-13 Wire hook & loop end 45982-42 & -4349347-10 2" x 18" Fixed end strap w/40891-18 Flat hook & 44587-10 Buckle 45982-10 & -1149347-19 2" x 18" Fixed end strap w/43120-13 Wire hook & 44587-10 Buckle 45982-42 & -4349347-11 2" x 25' Adjustable end strap w/40891-18 Flat hook 45982-10, 47970-10, 47971-10 49347-20 2" x 25' Adjustable end strap w/43120-13 Wire hook 45982-42 49347-12 2" x 28' Adjustable end strap w/40891-18 Flat hook 45982-11, 47970-11, 47971-1149347-21 2" x 28' Adjustable end strap w/43120-13 Wire hook 45982-43
48922-11 3" x 18" Fixed end strap w/41766-18 Flat hook & loop end 48987-20 & -2148922-17 3" x 33" Fixed end strap w/43366-14 Chain anchor & loop end 48987-24 & -2548922-20 3" x 18" Fixed end strap w/43365-12 Grab hook & loop end 48987-22 & -2349347-13 3" x 18" Fixed end strap w/41766-18 Flat hook & 48965-10 Buckle 48987-20 & -2149347-31 3" x 33" Fixed end strap w/43366-14 Chain anchor & 48965-10 Buckle 48987-24 & -2549347-40 3" x 18" Fixed end strap w/43365-12 Grab hook & 48965-10 Buckle 48987-22 & -2349347-14 3" x 25' Adjustable end strap w/41766-18 Flat hook 48987-2049347-32 3" x 25' Adjustable end strap w/43366-14 Chain anchor 48987-2449347-41 3" x 25' Adjustable end strap w/43365-12 Grab hook 48987-2249347-15 3" x 28' Adjustable end strap w/41766-18 Flat hook 48987-2149347-33 3" x 28' Adjustable end strap w/43366-14 Chain anchor 48987-2549347-42 3" x 28' Adjustable end strap w/43365-12 Grab hook 48987-23
48922-12 4" x 18" Fixed end strap w/41766-18 Flat hook & loop end 49346-10 & -1148922-15 4" x 18" Fixed end strap w/43120-20 Wire hook & loop end 49346-12 & -1348922-18 4" x 33" Fixed end strap w/43366-14 Chain anchor & loop end 49346-14 & -1548922-24 4" x 18" Fixed end strap w/41631-11 Delta ring & loop end 49346-16 & -1749347-16 4" x 18" Fixed end strap w/41766-18 Flat hook & 49349-10 Buckle 49346-10 & -1149347-25 4" x 18" Fixed end strap w/43120-20 Wire hook & 49349-10 Buckle 49346-12 & -1349347-34 4" x 33" Fixed end strap w/43366-14 Chain anchor & 49349-10 Buckle 49346-14 & -1549347-52 4" x 18" Fixed end strap w/41631-11 Delta ring & 49349-10 Buckle 49346-16 & -1749347-17 4" x 25' Fixed end strap w/41766-18 Flat hook 49346-1049347-26 4" x 25' Adjustable end strap w/43120-20 Wire hook 49346-1249347-35 4" x 25' Adjustable end strap w/43366-14 Chain anchor 49346-1449347-53 4" x 25' Adjustable end strap w/41631-11 Delta ring 49346-1649347-18 4" x 28' Adjustable end strap w/41766-18 Flat hook 49346-1149347-27 4" x 28' Adjustable end strap w/43120-20 Wire hook 49346-1349347-36 4" x 28' Adjustable end strap w/43366-14 Chain anchor 49346-1549347-54 4" x 28' Adjustable end strap w/41631-11 Delta ring 49346-17
Web Accessories
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Corner Protectors
Along with our standard rugged flatbed products, Ancra web accessories offer high-performance and durability. Sturdy
corner and web protectors prevent abrasion of cargo and cargo-securing straps. Tested and proven, our natural rubber
rope and ties allow for quick and easy securement of tarps.
3" RubberPart No. 42098-11Weight: .63 lb./.29 kg.
4" RubberPart No. 42098-12Weight: .75 lb./.34 kg.
Steel CornerProtector for Chain
Part No. 49377-10Weight: 1.26 lbs./.58 kg.
Web ProtectorPart No. 40985-05-12 12-in. Cordura® Nylon sleeve for 2-in. webbingWeight: .13 lb./.06 kg.
Part No. 40985-05-RL100-yd. bulk roll Cordura Nylon sleeve for 2-in. webbingWeight: .39 lb./yd./.18 kg./meter
Cordura® is a registered trademark of Dupont.
2" Aluminum 6061-T6
Part No. 41516-11Weight: .63 lb./.29 kg.
4" Plastic
Part No. 43986-10Weight: .06 lb./.03 kg.
4" Plastic
Part No. 49584-10Weight: .47 lb./.21 kg.
3" Steel
Part No. 49577-10Weight: .90 lb./.41 kg.
Part No. 49454-10 3/8" Hollow CorePart No. 49454-11 3/8" Solid CorePart No. 49454-12 7/16" Hollow CorePart No. 49454-13 7/16" Solid Core
• Standard 150-ft. coils• Easily assembled to desired
length for application.
Part No. 49211-10100 per packWeight: 5.2 lbs./2.37 kg.
Rubber Ties
Rubber Rope
Part No. 41569-10 9-in. 10 lbs./4.55 kg.Part No. 41569-15 15-in. 12 lbs./5.46 kg.Part No. 41569-21 21-in. 15 lbs./6.82 kg.Part No. 41569-31 31-in. 19 lbs./8.64 kg.Part No. 41569-41 41-in. 23 lbs./10.46 kg.
• Quantity 50 per box• Hooks are crimped to prevent loss
Rubber Rope Hook
Ancra also offers Transmat®
rebonded rubber friction
mats for cargo securement.
See page 33 for details.
WARNING: Rubber Ties have a strong spring force and if they become unhooked while under tension, they can snapback and cause injury. Safety glasses are recommended.
20
• Designed to hold tarp covers on trucks and trailers
• Not to be used to restrain or secure cargo • Molded rubber construction for high ozone
resistance and stretch resiliency• Stretches up to twice their length• Use caution when using rubber ties
21
From our breakthrough deck and loading
systems to our track, beams, bars and
hoops, Ancra’s interior van products meet
your full range of load requirements, from
standard-duty and cost-effective easy use,
to heavy-duty maximum restraint.
■ Loading systems made to match your
particular application
■ Track is coated and treated with high
quality finishes for corrosion resistance
■ Beams and bars are versatile and
provide the best possible strength-
to-weight ratio
■ Replaceable parts add to the life and
efficiency of your equipment
■ Strength tested and proven
Interior Van Solutions
Fits all trailers.Available for 96- or 102-inchtrailer widths. And height canbe specified. Track also canbe made as an integral partof sidewall structure.
Versatile.Beams can be adjusted inone-inch increments to accom-modate various loads within atrailer. Only Ancra offers thismuch adjustability.
Snag resistant.Low profile track design with sloping shoulders helps protectagainst forklift damage and allowsfor surface mounting. Standardtrack length is 72-inches, customlengths available.
Wide range of accessories.Lift-A-Deck II track can be usedfor securing loads with cargostraps, tie-offs, and decking/shoring beams.
Super strength.Ancra standard beams havethe highest rating in theindustry – 2,200 lbs./1,000 kg.
Easy operation.Beams are easily moved byone operator.
Convenient storage.When not in use, beams are easilypushed to the roof for secure storage. No more lost beams.
Lift-A-Deck® II
The most popular patented solution fordecking loads in trailer and truck bodies.With Ancra’s patented adjustable second deck in your trailer, you can carry double theamount of palletized freight. Or you can mix loads with only part of the truck double decked.Either way, you can increase your hauling capacity – and your profits.
For the loads where you need full height, you simply push the adjustable beams to theroof for convenient and safe storage. No more beams left on the loading dock.
The Ancra Lift-A-Deck® II system is the most versatile you can install. With four track stylesto choose from, installations can be made on any type of truck construction, including sheetand post. Lift-A-Deck II track can also be used with a wide range of Ancra accessories forcargo containment.
22
Simple, yet secure.Double-engagement lock onthe aluminum beam features a simplified trigger releasemechanism. Internal lockingdesign helps protect againstforklift damage.
23
• Lift-A-Deck informational video available upon request• Beams have a decking working load limit of 2,200 lbs.• Beams easily moved by just one operator.• Beams can be positioned in one-inch increments for most
efficient utilization of space.
• Internal locking mechanism to help protect against forklift damage.• Off-set foot beams allow for beam storage at ceiling height
previously prevented by interior wall rails.
Lift-A-Deck® II Track Options
Double Row Flanged S-Track72-inch: 49363-15
Beam access slot is provided as standard for all tracks for easy beam removaland replacement. Standard track length is 72 inches (16 inch loadable). Customlengths and an installation manual are available upon request.
Beam StopPart No. 49384-11
Lift-A-Deck® II Beam Accessoriesand Components
72-inch: 49363-14
Low Profile Single Row Flanged S-Track 72-inch:
49562-13-72.00
Standard Single Row S-Track
Low ProfileSingle Row S-Track72-inch:49363-10-72.00
Assembly Breaking Strength Capacity: 2,500 lbs./1,136 kg.Working Load Limit: 833 lbs./378 kg.
Part No. Length Weight
40602-94 12 ft. 2.00 lbs.
40602-95 16 ft. 2.20 lbs.
40602-96 20 ft. 2.50 lbs.
Assembly Breaking Strength Capacity: 3,000 lbs./ 1,363 kg.Working Load Limit: 1,000 lbs./454 kg.
Part No. Length Weight
48672-16 12 ft. 3.30 lbs.
48672-17 16 ft. 3.40 lbs.
48672-18 20 ft. 3.50 lbs.
Logistic Straps
Beam Release BarPart No. 49445-10
6,000 lb. Polyester Webbing (47200) with Cam Buckle(40880-19) and (47556-11) Double Stud Fitting
6,000 lb. Polyester Webbing (47200) with Ratchet Buckle(44258-13) and (47556-11) Double Stud Fitting
72"
1.13"
Pitch12"
.53"
Off-Set Foot andChannel AssemblyPart No. 49414-54
Standard Footand ChannelAssemblyPart No. 49414-53
Standard Beams w/ Standard Foot and Channel AssemblyDecking and Shoring WLL: 2,200 lbs./999 kg.*
Part No. 49414-14 Adjustment range: 87.25 to 97.50 inches (221.62 to 247.65 cm)
Part No. 49414-15 Adjustment range: 93.50 to 103.75 inches (237.49 to 263.53 cm)
Standard Beams w/ Off-Set Foot and Channel AssemblyDecking WLL: 2,200 lbs./999 kg.*
Shoring WLL: 1,450 lbs./658 kg.*
Part No. 49414-16 Adjustment range: 87.25 to 97.50 inches (221.62 to 247.65 cm)
Part No. 49414-17 Adjustment range: 93.50 to 103.75 inches (237.49 to 263.53 cm)
Note: Consult trailer or truck body/chassis manufacturer for recommended load capacity of second deck.
• Widest choice of track types to meet every application.• No track lubrication is required
Beam Extrusion Part No. 41332-29 Length: 89.8 inches (228 cm)
Only Ancra gives you so many decking options.
*Working Load Limit is 1/3 of Breaking Strength Capacity, and based on evenly distributed loads.
Your trailer can lead a double life.If your trailer could do double duty, think how profitable itwould be. Whether the job calls for a flat floor for generalfreight, or handling containerized air cargo (2-inch rollers,AF systems) or palletized freight (3-inch rollers, PF systems),there’s a Retract-A-Roll® II system for you. Plus, only Ancraoffers an Ironclad™ Unconditional Two-year Air BagWarranty – the best in the industry.*
Heavy cargo simply rolls on and off the truck.The Ancra Retract-A-Roll II pneumatic roller track system is the next generation in ultra-efficient materialhandling systems. Cargo can be loadedand unloaded quickly; speeding turn-around, reducing handling time andlowering labor costs. And regardlessof the application, it can reducedeadhead loads and increasetrailer utilization.
Engineered to weigh less and carry more.The use of extruded aluminum onmain and roller channels savesweight for maximum payload, whileadding strength. High-tensile fold-ed steel top plate stands up to fork-lifts without complaint. Galvanizedfinish resists corrosion. Rollers areeasy to replace in the unlikely eventone gets damaged. And the AncraWear Guard® offers exclusive 360˚air bag protection and the industry’sbest air bag warranty.
Easy to operate.Simple controls are quickly learned by operators. Primary and back-upcontrols are housed in a compositeweatherproof enclosure. The low-pressure pneumatic system uses thetruck’s existing air supply. There is noneed for an external air source.
*Call Ancra Customer Service at 800-233-5138 for complete warranty information.
Exclusive safety interlock.If rollers are not lowered by the operator, a control valve auto-matically lowers rollers when thevehicles brakes are released.
Easy to operate.Low pressure pneumatic systemruns off your truck’sair supply. No otherair supply is needed.
Industry-standardconnectors.Standard DOT fittings and 3/8" air line usedthroughout for reliability,serviceability and forreduced cycle times.
Centralized controls.Easy-to-use controls arehoused in a weatherproofcontainer.
24
Light, strong andrugged.Extruded aluminummain and roller channelsaves weight and addsstrength.
Retract-A-Roll ® II
Heavy-duty top plate.Hi-tensile, 11-gauge foldedsteel top plate with reinforc-ing ribs takes the abuse offorklifts. Galvanized finishfights corrosion.
Fast operation.Rollers take less than 15 seconds to raise.
Air bag protection.Ancra’s exclusive air bag sleeve offers360˚ protection plus the industry’s bestair bag warranty.
Simple roller replacement.Rollers can be easily replaced byremoving a spring clip.
Flanged roller opening.Helps prevent debris collectionin roller cradle and reducesclean out requirement. It alsoincreases top plate stiffness.
Retract-A-Roll II Specifications
Retract-A-Roll AF Retract-A-Roll PFTrack width: 4.2 inches / 107 mm 5.2 inches / 132 mm
Track height: 2.75 inches / 70 mm 2.75 inches / 70 mm
Track weight: 7.2 lbs/ft / 10.7 kg/m 5.8 lbs./ft. / 8.7 kg/m (3" roller, 4" pitch) (2" roller, 6" pitch)
Inflated height: 3.3 inches / 84 mm 3.3 inches / 84 mm
Roller width: 2.0 inches / 51 mm 3.0 inches / 76 mm (air freight) (palletized freight)
Roller spacing: 4" / 6" straight pitch / 4" straight pitch / 102 mm102 / 152 mm
Track lengths: 8', 10' and 13' standard 8', 10' and 13' standard2.4 m, 3 m, 4 m standard 2.4 m, 3 m, 4 m standard(custom lengths available) (custom lengths available)
Lifting capacity: 450 lbs/ft / 671 kg/m 450 lbs/ft / 671 kg/m
Bearing capacity: 500 lbs/ft / 745 kg/m 500 lbs/ft / 745 kg/m(standard duty)
Operating air pressure: 30 psi / 2 bar 30 psi / 2 bar
Control box: weatherproof composite weatherproof composite construction with construction with centralized controls. centralized controls.
Roller cradle.Unique, patented tilt-out design makes
inspection and maintenance a breeze.
Better design.The patented Ancra Retract-A-Roll II uses
internal stops in the main channel to limit
the roller channel lift. Competitors’ roller
track designs use the top plate as the
roller channel stop, and require more
fasteners to hold it in place. Rollers are
available in 2-inch (AF-air freight) and
3-inch (PF-palletized freight) widths.
Easy installation.Flanges on the side of the track make
installation easier and help insure a water-
tight floor structure.Track is available
with bottom-flange mount or center-
flange mount to meet your particular
application.
Easier top plate removal.The unique, patented Ancra top plate
retention system needs only two screws
and two anchor pins per track module
which significantly reduces the time for
inspection and maintenance. Heavy-duty
retention plate with welded nuts ensures
long life.
25
2"
3"
Ancra Series E, A and F Track were designed to team withAncra end fittings, Beam Sockets and Decking and ShoringBeams for the strongest, most reliable support. Steel constructed and tested for strength, Ancra Track comesin 10 ft. (3 m) lengths for a wide range of cargo restraintapplications. To withstand corrosion, Ancra galvanizedtrack has a G-90 hot dip finish with a surface chemicaltreatment. Painted track are finished with either high-quality, powder coat or semi-gloss enamel. Custom lengthsand special finishes available, contact customer service.
Series E
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Series E track is made of high strength 12-gauge steel for Series E end fittings, Beam Sockets and Decking/Shoring Beams. (See products on page 28, 29 and 33.) These tracks may be attached with screws, rivets, or by welding.*
Part No. 48117-25-120.00Green Powder Coat
Weight/Length: 16.6 lbs./10 ft.7.5 kg./3 mStrength: 50,000 lbs. minimum yield
Part No. 48117-21-120.00Galvanized
Weight/Length: 17.2 lbs./10 ft.7.8 kg./3 mStrength: 50,000 lbs. minimum yield
Horizontal
Vertical
4.87(124)
.43(11)
2.0 (51) .25 (6) Dia.
10 ft. (3m)
.28 Dia.(5)
2.0 Typ.(51)
3.4(86)
.43(11)
4.0(102)
Logistic Track
26
Part No. 40838-10Green Powder Coat
Weight/Length: 13.5 lbs./10 ft.6.1 kg./3 mStrength: 50,000 lbs. minimum yield
Part No. 40838-11Galvanized
Weight/Length: 14 lbs./10 ft./3 m Strength: 50,000 lbs. minimum yield
WARNING: Reference TTMA RP No. 47-99 for installation.Attach track using screws, rivets or by welding. Contact vehiclemanufacturer or qualified installer to determine fastener sizeand mounting method. Welding of galvanized material may emittoxic fumes. Please use caution and proper ventilation.
Series F Channel
5.0
.765 Dia. (20)
.203 Dia. (5)
.5(13)
10.0
.45 (11)
1.6 (41)
10 ft.(3 m)
9.8 ft.(2.9 m)
(8)
3.31
1.99
.330
2.00
.280 DIA THRU120 HOLES
± .020
(84)
Part No. 42948-10 Green Enamel Paint
Weight/Length: 15.0 lbs./10 ft.6.8 kg./3 mStrength: 50,000 lbs./22,727 kg. minimumyield. 12-gauge
Part No. 49359-10 Aluminum
Weight/Length: 8 lbs./10 ft.3.6 kg./3 mStrength: 35,000 lbs./15,909 kg. minimumyield
Part No. 48111-10 Green Enamel Paint
Weight/Length: 13.30 lbs./10 ft.5.9 kg./3 mStrength: 50,000 lbs./22,727 kg. minimumyield. 11-gauge
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Series F Series F track is made of high strength steel for F end fittings and Shoring Beams. (See products on page 29.)This track may be installed vertically or horizontally by welding* or with screws and rivets.
Horizontal
Vertical
*Caution: Welding of galvanized track should be done only in well ventilated areas. Welding fumes may be toxic.
27
Part No. 47235-10 Natural1.62 in. mounting hole spacingWeight/length: 9.0 lbs./10 ft., 4.05 kg./3 m11-gaugeStrength: 50,000 lbs./22,727 kg. minimum yield
Part No. 47235-15 Galvanized1 in. hole spacingWeight/length: 6.2 lbs./7.5 ft., 2.8 kg./2.25 m11-gaugeStrength: 50,000 lbs./22,727 kg. minimum yield
Series A Series A track, made of high strength steel or 6061 T6 aluminum, is designed for Series E end fittings, Beam Sockets and Decking/ShoringBeams. (See products on page 28, 29 and 33.) This track may be attached by welding* or with rivets and screws.
Logistic Track
4.87(124)
.43(11)
2.0 (51) .25 (6) Dia. 10 ft.(3m)
.34 (.87)
.125 2X(.32)
.710 (2)
.440± .020
4.50(11)
1.00(3)
2.000 (1) .550TYP
1.44 (4)
2.410 (6)TYP
ø.274– .280 TYP
5.17(13)
.710 (2)
(5) TYP120.0
Part No. 40849-14 Galvanized1.62 in. mounting hole spacingWeight/length: 6.0 lbs./10 ft., 2.7 kg./3 m15-gaugeStrength: 50,000 lbs./22,727 kg. minimum yield
3.9 3.16
.80 1.62
.280
.37
1.000 10 ft.(3m)
Part No. 49313-13 Galvanized1.62 in. mounting hole spacingWeight/length: 12.2 lbs./10 ft., 5.53 kg./ 3 m12-gaugeStrength: 45,000 lbs./20,430 kg. minimum yield
Beams, Bars & Hoops
Decking Working Load Limit: 2,200 lbs./1,000 kg.*Shoring Working Load Limit: 2,200 lbs./1,000 kg.*
Part No. 43638-50 Adjustable Range/Weight: 85.7 – 96.6 in./16.0 lbs./7.27 kg.Part No. 43638-51 Adjustable Range/Weight: 92.0 – 102.9 in./18.8.0 lbs./8.55 kg.
Decking Working Load Limit: 3,000 lbs./1,363 kg.*Shoring Working Load Limit: 2,500 lbs./1,136 kg.*
Part No. 49039-50 Adjustable Range//Weight: 83.7 – 94.7 in./20.50 lbs./9.32 kg.Part No. 49039-51 Adjustable Range//Weight: 91.9 – 102.9 in./22.5 lbs./10.23 kg.Part No. 49039-52 Adjustable Range//Weight: 94.8 – 105.8 in./24.25 lbs./11.03 kg.
Standard-Duty Series E and A Decking/Shoring Beam with patented flat latch
Heavy-Duty Series E and A Beam Assembly with patented flat latch
Series E and A Steel Decking/Shoring Beam with patented flat latch
Replacement Parts
Decking Beam Hoops
Decking Working Load Limit: 1,500 lbs./681 kg.*Shoring Working Load Limit: 1,500 lbs./681 kg.*
Part No. 49360-53 Adjustable Range/Weight: 92.1 – 102.9 in./27 lbs./12.28 kg.
Replacement Channel Assembly with patented flat latch
Part No. 43627-13 11 Ga.
Weight: 3.8 lbs./1.73 kg.For aluminum beams 43638 and 49039
Attaching Pin
Part No. 41338-10Weight: .10 lbs./.05 kg.For aluminum beams 43638 and 49039
Part No. 41338-12Weight: .10 lbs./.05 kg.For steel beam 49360
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.28
*Working Load Capacity is 1/3 of Breaking Strength Capacity, and based on evenly distributed loads.
14 gauge steel
Can be retrofitted into conventional trigger-style beams.
All the selection you’ll ever need and innovation too. Ancra gives you a choice in shoring beams with steel, aluminum,and heavy-duty aluminum models available. In addition, we also offer a new, patented flat latch mechanism that eliminates the age old problem of damaged trigger mechanisms. It’s easier to release, even while wearing gloves.There is even a replacement flat latch channel assembly that can be used to update your existing beams. Extend beam life and keep your costs low.
Designed to help restrain the movement of packages of cargo within your truck or trailer.Two hoops and attachment hardware are includedproviding easy mounting. For 43638, 49039 and49360 series E and A Decking/Shoring Beams.
Part No. 47670-10
Weight: 13.25 lbs./6.01 kg.
Garment BeamsSpecially designed for transporting hanging garments suspended from rope loops in closed trailers. Features a curved top beam toreduce wear on ropes, and is made of high strength extruded aluminum for durability. Assembled with Ancra Beam Socket 40921-10.
29
Working Load Limit: 1,500 lbs./681 kg.*
Part No. 45867-12Length/Weight: 96 in./14.0 lbs./6.36 kg.
For use with standard commercial grade Douglas Fir 2-in. x 6-in. lumber.Please note: the working load limit of lumber varies widely.
Heavy-Duty Beam Socket
Part No. 40921-11Weight: .85 lb./.39 kg.
StandardBeam Socket
Part No. 40921-10Weight: .70 lb./.32 kg.
Beam Sockets
Shoring Bars – F Series with new easy push button design
Round Shoring Bar
Part No. 49439-10Adjustable in 2" increments to 117"Weight: 20.0 lbs./9.1 kg.Shoring Working Load Limit: 500 lbs./227 kg.Recommended installed length: 81" – 117"Outer tube diameter: 1.66"
Part No. 49439-11For 1" hole diameter track (Canada)Adjustable in 2" increments to 117"Weight: 20.0 lbs./9.1 kg.Shoring Working Load Limit: 500 lbs./227 kg.Recommended installed length: 81" – 117"Outer tube diameter: 1.66"
Part No. 49439-21 For 1" hole diameter track (Canada)Adjustable in 2" increments to 117"Weight: 27.9 lbs./12.68 kg.Shoring Working Load Limit: 1,000 lbs./454 kg.Recommended installed length: 81" – 117"Tube size 2" square
Square Shoring Bar
Part No. 49439-20Adjustable in 2" increments to 117"Weight: 27.9 lbs./12.68 kg.Shoring Working Load Limit: 1,000 lbs./454 kg.Recommended installed length: 81" – 117"Tube size 2" square
*Working Load Limit is 1/3 of Breaking Strength Capacity, and based on evenly distributed loads.
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Replacement PartsTrigger Repair Kit
Part No. 45951-11Includes spring, keeper and rivet.Weight: .20 lb./.09 kg.For Part No. 43627-12 and 49361-10channel assemblies
Beams, Bars & Hoops
Part No. 45867-13Length/Weight: 102 in./15.0 lbs./6.82 kg.
Flat Latch Repair KitPart No. 45951-12Includes latch, screw, nut, springs & instructions.Weight: .14 lb./.06 kgFor Part No. 43627-13 channel assembly
Designed to help restrain the movement of smallpackages of cargo within your truck or trailer.Two hoops and attachment hardware are includedproviding easy mounting. For 43782, 47209,48407 round tube bars.
Part No. 48407-10Length/Weight: 89.75 – 104.5 in.,11.72 lbs./5.33 kg.Long Tube Diameter: 1.50 in.
Part No. 48407-14 With large bolt-on 4" x 4" feet
Length/Weight: 89.75 – 104.5 in.,11.72 lbs./5.33 kg.Long Tube Diameter: 1.50 in.
Cargo Sta® Bars & Hoop Set
Part No. 43782-15Length/Weight: 89.75 – 104.5 in./8.95 lbs./4.07 kg.Long Tube Diameter: 1.50 in.
Aluminum Standard Cargo Sta®
Part No. 47209-10Length/Weight: 89.75 – 104.5 in./12.85 lbs./5.84 kg.Long Tube Diameter: 1.50 in.
3-Piece Aluminum Cargo Sta®
Part No 43991-10Tube Diameter: 1.5 in.Weight: 10.0 lbs./4.5 kg.
Economy Steel Cargo Sta® w/ Bolt-On Feet
Hoop Set for Cargo Sta®
For use in light- to medium-duty cargo applications in van trailers, these cargo barsare made of 6061 T6 aluminum or 15-gauge triple-coated galvanized steel tubing.Cargo Sta® expands to fit securely without placing excessive pressure on trailerwalls, and durable swivel feet grip securely in a variety of vehicle widths.
All Cargo Sta® bars come with 2-in. x 4-in. bolt on feet assemblies unless otherwise noted.
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
CAUTION:
Because trailer sidewalls
vary, the Ancra Cargo Sta®
and Jack Bars do not have
load capacities.
30
31
Jack Bars feature 4" x 4" bolt-on feet assemblies and are designed for use inlight- to medium-duty cargo applications. They feature 2" square heavy-gauge,galvanized steel tubing with a cycle tested, heavy-duty automotive jack assembly.All jack bars can be assembled with welded hoops or in 2- or 3-piece models.
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Part No. 49205-26Weight: 18 lbs./8.19 kg. Adjustment range: 85.0 in. – 114.0 in.
Part No. 49205-27Weight: 25 lbs./11.37 kg. Adjustment range: 85.0 in. – 114.0 in.
Universal Jack Bar
Part No. 49205-31Weight: 16.2 lbs./7.3 kg.
CAUTION:
Because trailer sidewalls vary,
Ancra Heavy-Duty Jack Bars
load capacities are not available.
Heavy-Duty Jack Bars
• 51” size used to restrain half loads; compact to fit inlocked tool box
• Useful in various load configurations through the universal design.
Fully Retracted Adjustment Range: 51" – 80"
Mid Extension Adjustment Range: 70" – 99"
Full Extension Adjustment Range: 85" – 114"
Heavy-Duty One-Piece Galvanized with Hoops
Heavy-Duty One-Piece Galvanized
Cargo Bar Holder
Jack Bar Replacement Parts
Part No. 49348-10Weight: 5.5 lbs./2.50 kg.
Constructed of rust-resistant galvanized steel, the Ancra CargoBar Holder holds two heavy-duty or standard-duty cargo bars.The Cargo Bar Holder has a locking mechanism and accommo-dates both 2" x 4" or 4" x 4" feet.
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Cargo Sta® Replacements
Tube, Adjustable End (short)Length/Weight: 1.22 x 28 in./1.9 lbs./.86 kg.
Part No. 47524-12 SteelFor 43782-15, 47209-10, 48407-10
Foot, Fixed End (long)
Part No. 43781-14
2 in. x 4 in. Bolt-OnWeight: .62 lb./.29 kg.For 43782-15, 47209-10, 48407-10
Part No. 43781-16
4 in. x 4 in. Bolt-OnWeight: 1.1 lbs./.5 kg.For 48407-14, 49205-26, 49208-27,49205-31
Housing Rack, Lever AssemblyWeight: 2.12 lbs./.97 kg.
Part No. 47523-13 for Cargo Sta 43782-15, 48407-10 and 11Includes trigger, set screw, rack and lever
Foot, Adjustable End (short)
Part No. 43781-15
2 in. x 4 in. Bolt-OnWeight: .78 lb./.36 kg.For 43782-15, 47209-10, 48407-10
Part No. 43781-17
4 in. x 4 in. Bolt-OnWeight: 1.35 lbs./.61 kg.For 48407-14, 49205-26,49205-27,49205-31
Tube Fixed End (long)Length: 1.5 x 77 in.
Part No. 43775-15 AluminumFor 43782-15 Weight: 2.91 lbs./1.32 kg.Part No. 43775-22 SteelFor 48407-10 Weight: 5.62 lbs./2.55 kg. Part No. 49379-10 SteelFor 49205-26, 49205-27 Length/Weight: 1.5 x 78 in./9.7 lbs./4.41 kg.
Jack Assembly Kit
Part No. 49400-10 Weight: 8.10 lbs./3.67 kg.Complete kit includes one jack assembly, one adjustable end foot, one fixed end foot and necessary hardware. For Jack bars 49205-26, -27 and -31.
32
Part No. 40386-10 3-piece end fitting for rope use with Series E or Series A TrackBreaking Strength Capacity:
3,000 lbs./1,363 kg.Working Load Limit: 1,000 lbs./454 kg.Weight: .30 lb./.14 kg.
Part No. 40386-11 Spring actuated fitting for rope use with Series E or Series A TrackBreaking Strength Capacity:
3,000 lbs./1,363 kg.Working Load Limit: 1,000 lbs./454 kg.Weight: .40 lb./.18 kg.
Part No. 49542-10 Breaking Strength Capacity:
3,000 lbs./1,363 kg.Working Load Limit: 1,000 lbs./454 kg.Weight: .34 lb./.15 kg.
Part No. 40386-12For rope use with Series F TrackBreaking Strength Capacity:
1,500 lbs./681 kg.Working Load Limit: 500 lbs./227 kg. Weight: .30 lb./.14 kg.Part No. 40386-13For 1" hole diameter track (Canada) Weight: .30 lb./.14 kg.
Series E and A Rope Tie Off
Series E and A Rope Tie Off
Series E and A Fitting w/ D-Ring
Series F Rope Tie Off
Ancra Pan Fittings are designed for low-profile mounting in trucks and trailers.The Recessed Pan Fitting is made for heavy-duty floor applications and has a tension feature that reduces ring movement while allowing easy lifting foraccess. The Stake Pocket Anchor can be surface or flush mounted forinstalling in trailer floors and accepts roll cart lock pins.
Part No. 45849-13Recessed Pan Fitting
Breaking Strength Capacity: 5,000 lbs./2,272 kg.
Working Load Limit: 1,666 lbs./757 kg.Weight: 1.20 lbs./.55 kg.
Part No. 49371-10Stake Pocket AnchorConforms to USPS drawing B-13956.Black Lacquer FinishWeight: 0.98 lb./.44 kg.
Part No. 45545-15with black trim collar
Breaking Strength Capacity: 1,600 lbs./727 kg.
Working Load Limit: 530 lbs./240 kg.Weight: .30 lb./.14 kg.
Strength-tested Ancra door pulls provide ease in pulling overhead and side doorsand wheel carts. Featuring a galvanized steel clip for rust protection and pre-punched holes for easy installation, door pulls come in 18", 24" and 36" lengths.
Part No. 49015-18 18-in. Door Pull Strap Weight: .20 lb./.09 kg.Part No. 49015-24 24-in. Door Pull Strap Weight: .30 lb./.14 kg.Part No. 49015-36 36-in. Door Pull Strap Weight: .40 lb./.18 kg.
Product No. 49382-10 Sheet 3' x 3' 2mm thickProduct No. 49382-11 Roll 3' x 1900' 2mm thickProduct No. 49382-12 1' x 5' 1/4" thick w/handholds
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT. 33
A convenient way to attach rope or web to trailer side wall.
Truck & Trailer Fittings
Door Pull Straps
Transmat ® Friction Mat
Accessories
Tie Offs
Part No. 47772-12Breaking Strength:
3,000 lbs./1,363 kg.Working Load Limit:
1,000 lbs./454 kg.Weight: .45 lb./.20 kg.
Series E and A Articulated Track Fitting
• Durable rebonded rubber• Coefficient of friction of 1.0• Tensile strength of 17.5 psi minimum• Shore A Hardness of 40-60 points
Series E Strap Assembly
Series F Strap Assembly
Series E Assembly with 3-piece end fitting
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Combining Ancra’s sturdy steel cam buckles with ourcut-resistant webbing in lengths of 12, 16, and 20feet, the Cam and Ratchet Buckle Strap Assembliesoffer quick securement for light to medium loads. The standard fixed end length for all straps is 48".Built on a reputation for dependability and strength,these strap assemblies promise the quality thatcomes with every product that bears the Ancra name.
Series E Assembly with spring-actuated end fitting
41409-13
47608-21
40980-11
41325-10
Cam Buckle Strap Assemblies
Tiedown Straps & Assemblies
34
Please note: Ancra webbing comes in three colors, coded according to lengths. 12 ft. webbing is yellow, 16 ft. webbing is gray, 20 ft. webbing is blue.
End fitting part numbers are shown for reference only.
6,000 lb. Polyester Webbing (47200) with Cam Buckle 40880-19
Slat Strap Assembly
Electronic Straps
47608-21
An additional E fitting allows for increased adjustability for various applications .
Part No. Strap Length Weight
40602-10 12 ft. 1.90 lbs.
40602-11 16 ft. 2.10 lbs.
40602-12 20 ft. 2.40 lbs.
Part No. Length Weight
40602-17 12 ft. 1.90 lbs.
40602-18 16 ft. 2.10 lbs.
40602-19 20 ft. 2.40 lbs.
Part No. Length Weight
40602-20 12 ft. 1.70 lbs.
40602-21 16 ft. 1.90 lbs.
40602-22 20 ft. 2.20 lbs.
Part No. Length Weight
40602-23 12 ft. 1.80 lbs.
40602-24 16 ft. 2.00 lbs.
40602-25 20 ft. 2.30 lbs.
Part No. Length Weight
49025-20 12 ft. 2.20 lbs.
49025-21 16 ft. 2.40 lbs.
49025-22 20 ft. 2.70 lbs.
Assembly Breaking Strength Capacity: 2,500 lbs./1,136 kg.Working Load Limit: 833 lbs./378 kg.
Assembly Breaking Strength Capacity: 2,500 lbs./1,136 kg.Working Load Limit: 833 lbs./378 kg.
Assembly Breaking Strength Capacity: 1,500 lbs./681 kg.Working Load Limit: 500 lbs./227 kg.
Assembly Breaking Strength Capacity: 2,500 lbs./1,136 kg.Working Load Limit: 833 lbs./378 kg.
Assembly Breaking Strength Capacity: 2,500 lbs./1,136 kg.Working Load Limit: 833 lbs./378 kg.
35
Ratchet Buckle Straps
Plate Trailer Straps
Series E Ratchet Buckle Strap w/ Spring End Fitting
Series E Heavy Duty
Cam Buckle Strap w/ F Hook & Spring E Fitting
Cam Buckle Strap w/ Wire Hook & Spring E Fitting
Ratchet Buckle Strap w/ F Hook & Spring E Fitting
Ratchet Buckle Strap w/ Wire Hook & Spring E Fitting
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Tiedown Straps & Assemblies
Features heavy-duty 6,000 lb. polyester webbing 47200 and standard handle ratchet buckle 44258-13 for durability and wear.
Heavy-duty 12,000 lb. yellow polyester webbing 41632-13 and standard handle ratchet buckle 44627-11 for durability and wear. All yellow straps.
Breaking Strength: 3,000 lbs./1,363 kg.Working Load Limit: 1,000 lbs./454 kg.
Part No. Strap Length Weight
48672-13 12 ft. 3.2 lbs.
48672-14 16 ft. 3.3 lbs.
48672-15 20 ft. 3.4 lbs.
Breaking Strength: 3,000 lbs./1,363 kg.Working Load Limit: 1,000 lbs./454 kg.
Part No. Strap Length Weight
49021-20 12 ft. 3.5 lbs.
49021-21 16 ft. 4.0 lbs.
49021-22 20 ft. 5.0 lbs.
Part No. Strap Length Weight
48253-13 12 ft. 3.40 lbs.
48253-14 16 ft. 3.50 lbs.
48253-15 20 ft. 3.60 lbs.
Part No. Strap Length Weight
48253-16 12 ft. 3.62 lbs.
48253-17 16 ft. 3.72 lbs.
48253-18 20 ft. 3.82 lbs.
Part No. Strap Length Weight
48253-19 12 ft. 2.10 lbs.
48253-20 16 ft. 2.30 lbs.
48253-21 20 ft. 2.60 lbs.
Part No. Strap Length Weight
48253-22 12ft. 2.32 lbs.
48253-23 16 ft. 2.52 lbs.
48253-24 20 ft. 2.82 lbs.
Breaking Strength: 2,500 lbs./ 1,136 kg. Working Load Limit: 830 lbs./ 376 kg.
40024-12
47608-21
42012-12
47608-21
40024-12
47608-21
42012-12
47608-21
Tiedown Straps and Assemblies
Specialty Auto Tiedowns
Ocean Transport StrapDesigned specifically for the securement of automobiles in autotransport vessels, Ancra’s Ocean Transport Strap incorporates alow-profile overcenter buckle and stamped steel hooks. The strapassembly has a breaking strength of 3,300 lbs./1,500 kg. andworking load limit of 1,100 lbs./500 kg.
Part No. 44926-10 80 in. StrapWeight: 2.10 lbs/.95 kg.
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
General Purpose Strap
Custom Nets
Breaking Strength: 3,000 lbs./1,363 kg. Working Load Limit: 1,000 lbs./454 kg.
Series E Low Profile Buckle Strap w/Spring E Fitting(Not shown)Part No. Strap Length Weight Webbing Polyester
48672-33 12 ft. 4.00 lbs. 4,500 lbs.
48672-34 16 ft. 4.10 lbs. 4,500 lbs.
48672-35 20 ft. 4.20 lbs. 4,500 lbs.
Series E Heavy Duty Buckle Strap w/Spring E Fitting
49021-30 12 ft. 4.50 lbs. 12,000 lbs.
49021-31 16 ft. 5.00 lbs. 12,000 lbs.
49021-32 20 ft. 5.50 lbs. 12,000 lbs.
Ancra custom solutions promise quality and performance.Designed for your particular van application, Ancra
custom nets offer retention support for various sized andshaped packages. Using strong 1" or 2" webbing, they’reindividually tailored to fit your van and loading condition,assuring maximum effectiveness in transporting a loadsecurely.
Interior van strapsshould be inserted intrack 18- to 24-inches
behind thefront edge of the load
and cinched tight.
Tiedown strap of strong 6,000 lb., 2" webbing 47200-62. Complete with Roller Buckle 41645-10 in three standard lengths. All blue straps.
Breaking Strength: 3,000 lbs./1,363 kg. (Loop load)Working Load Limit: 1,000 lbs./454 kg. (Loop load)
Part No. Strap Length Weight
41643-10 12 ft. .85 lbs.
41643-11 15 ft. 1.00 lbs.
41643-12 21 ft. 1.30 lbs.
Torque Limiting Ratchet Assemblies
3632
Damaged logistic track or buckled trailer sidewalls are a thing of thepast with Ancra’s Torque Limiting Ratchet Assemblies. A patentedratchet mechanism limits strap tension to 300 lbs.—enough to secure the load, but not enough to cause damage from over tightening.Assemblies are available with Low Profile (49715-10) or Heavy Duty(49410-12) long handle buckles. Strap lengths available from 12 to 20feet to meet your specific requirements.
Auto Tiedown Strap
Part No. Strap Length Weight
49020-20 6 ft. 3.80 lbs./1.73 kg.
49020-21 8 ft. 4.44 lbs./2.02 kg.
49020-22 12 ft. 4.84 lbs./2.20 kg.
Assembled with durable latex-treated polyester webbing (41632-13)and ratchet buckle (47105-11). Fixed end features a Series E & AArticulated Track Fitting (47772-12), and the adjustable end featuresa cluster hook (45515-10).
Part No. 49023-20 6-foot StrapPart No. 49023-21 8-foot StrapPart No. 49023-22 12-foot Strap
Strap Assembly Breaking Strength Capacity: 3,000 lbs./1,363 kg.Working Load Limit: 1,000 lbs./454 kg.
A simple, widely used method of auto transport for use in vansequipped with Series E or A Track. Made with Ratchet Buckle(44627-10), Spring E Fitting (47608-21) and Blue Polyester web(47200-62).
Part No. 48936-10 12 ft. RO/RO Strap, Series E
Strap Assembly Breaking Strength Capacity: 3,000 lbs./1,363 kg.Working Load Limit: 1,000 lbs./454 kg.Weight: 3.65 lbs./1.66 kg.
Specialty Auto Tiedowns
Tiedown w/ Snap Hooks
Series E Transit Strap w/RTJ Hooks
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Basket Strap
Part No. 45143-20Weight: 2.25 lbs./1.03 kg.
Wheel Dolly Strap
Part No. 47934-11Weight: 1.0 lbs./.46 kg.
Wheel Dolly Strap
Part No. 47935-11Weight: 1.50 lbs./.69 kg.
Soft TiedownsAncra designs and manufactures a complete line of wheel dolly straps for towing automobiles.Three of the more popular designs are shown here. Call us about your specific requirements.
3733
Ancra’s tiedowns feature latex-treated polyester (41632-13) withratchet buckle (47105-11) and snap hook (40084-14).
Strap Assembly Breaking Strength Capacity: 5,000 lbs./2.272 kg.Working Load Limit:1,666 lbs./757 kg.
For tires7" W x 20" H
For tires8" W x 22" H
For tires10" W x 24" H
Multi-Pack Consumer Tiedowns
Ancra Utility Tiedowns are versatile and reliable for securing a wide range of light- to medium-duty cargo. Made of high-strength steel and abrasion-resistant webbing, they’re quick and easy to use, for secure performance in recreational, light industrial, and agricultural applications. Other sizes and fittings available.
Ancra Red Utility StrapPart No. 41048-10 1" x 5.5' Weight: 1.60 lb./.73 kg.
Part No. 41048-23 1" x 13'Weight: 1.78 lb./.81 kg.
Breaking Strength: 1,200 lbs./545 kg.Working Load Limit: 400 lbs./181 kg.
Light-Duty Cam BuckleStrap Assembly Part No. 44340-101" x 10' Strap with Wire HooksBreaking Strength: 1,800 lbs./818 kg.Working Load Limit: 600 lbs./272 kg.Weight: 1.40 lbs./.64 kg.
Qwik HookPart No. 49512-104-pack of universal truck bed hooks.Working Load Limit:1,250 lbs./568 kg.Weight: 1.40 lbs./.64 kg.
Heavy-Duty RatchetStrap AssemblyFor cargo handling in pick-up truck hauling and deliveries.
Part No. 44340-111" x 10' Strap with Wire HooksBreaking Strength: 3,000 lbs./1,363 kg.Working Load Limit: 1,000 lbs./454 kg. Weight: 1.60 lbs./.73 kg.
Ratcheting Tiedowns Part No. 49368-10 1" x 15' 4-pack
1" red strap with steel Ratchet Buckle and steel, vinyl-coated “S” hooks secures cargoand sport utilities including motorcycles, water craft and ATVs. Weight: 4.7 lbs./2.14 kg.Breaking Strength: 800 lbs./363 kg.Working Load Limit: 266 lbs./121 kg.
Cam Buckle TiedownsPart No. 49368-11 1" x 6' 4-pack
1" black strap with steel Cam Buckle and steel “S” hooks with scratch resistant vinyl coating. Weight: 3.7 lbs./1.69 kg.Breaking Strength: 800 lbs./363 kg.Working Load Limit: 266 lbs./121 kg.
Ratcheting & Cam BuckleTiedowns Combo Pack
Part No. 49368-12Two each multi-purpose Ratcheting and CamBuckle Tiedowns with 1" straps, steel bucklesand vinyl-coated steel hooks. Weight: 4.2 lbs./1.91 kg.
38
Utility Tiedowns
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Mini Ratchet StrapFor medium-weight loads, with Flat Wire Hook and D-ring combination end attachment. Comes display packaged.Breaking Strength: 3,000 lbs./1,363 kg.Working Load Limit: 1,000 lbs./454 kg.
Part No. 43887-10 1" x 16' Weight: 1.56 lbs./.71 kg.Part No. 43887-11 1" x 20' Weight: 1.69 lbs./.77 kg.
Ancra Lash with Ratchet Buckle Strap Multi-purpose
Part No. 44557-10 15' longPart No. 44557-11 Display Packaged,
15' longBreaking Strength: 1,500 lbs./681 kg.Working Load Limit: 500 lbs./227 kg. Weight: .84 lb./.38 kg.
39
Our buckles, hooks, rings, track
fittings and attachments are
high-strength steel. Abrasion-
resistant webbing is a trade-
mark of Ancra quality. Standard
or custom, these products are
the core of Ancra’s first-rate
reputation.
■ Quality materials and solid
steel construction ensures
longevity
■ Positive locking feature for
security
■ Wide assortment of hardware
for any application
General Hardware & Webbing
Buckles
40
The standard of the industry, Ancra’s durable bucklesare designed with a unique latch and patented fastrelease cam that reduces sprocket wear. Our broadline of steel Ratchet, Cam and Overcenter Bucklesmeet your wide-ranging load requirements, offeringquick and easy release and secure locking tension.
Ratchet BucklesAncra Ratchet Buckles are available in one- or three-piecestandard- or long-handled versions, and a variety of webbingwidths and thicknesses. When closed, the ratchet handlelocks the latch into the sprocket to prevent inadvertent release.The handle cross-pin interlocks with the frame, maintaining alow-profile design and reinforcing assembly durability. Aremovable rear bolt allows for in-field conversion or repairs.
Part No. 43320-32Part No. 43320-33 With bolt and nut
Breaking Strength: 4,400 lbs./2,000 kg.Working Load Limit: 1,466 lbs./666 kg.Code No.: 2HWeight: .81 lb./.36 kg.Code No.: 3H (on -33)
Part No. 48770-10 Low profile, black powder coat
Breaking Strength: 1,500 lbs./681 kg. Working Load Limit: 500 lbs./227 kg.Code No.: BXWeight: .50 lb./.22 kg.
Part No. 44232-10
Breaking Strength: 1,200 lbs./545 kg.Working Load Limit: 400 lbs./181 kg.Code No.: 8LWeight: .50 lb./.22 kg.
Part No. 41808-11 1 3/4 in. Hook End
Breaking Strength: 6,600 lbs./3,000 kg.Working Load Limit: 2,200 lbs./1,000 kg.Code No.: 1QWeight: 1.65 lbs./.75 kg.
4.70
2.35
1.55
1.10
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
1-inch
ANCRA BUCKLE QUALITY
increases leverage by 20%, and the wider frame and latch design
allows more hand room for easier operation. What began as inno-
vation, is now the standard of the industry.
The now-popular and often copied long, wide-handle ratchet is a
classic example of Ancra innovation. Our patented locking mecha-
nism guards against vibration release, the 1.5-inch longer handle
41
2-inch
3-inch 4-inch
Part No. 44258-13 Low Profile
Breaking Strength: 4,500 lbs./2,045 kg.Working Load Limit: 1,500 lbs./681 kg.Code No.: 9XWeight: 1.30 lbs./.59 kg.
Part No. 44587-10 Long Wide Handle
Breaking Strength: 11,000 lbs./5,000 kg.Working Load Limit: 3,666 lbs./1,666 kg.Code No.: 4NWeight: 2.3 lbs./1.05 kg.
Part No. 44627-11 Standard Handle
Breaking Strength: 10,000 lbs./4,545 kg.Working Load Limit: 3,333 lbs./1,515 kg.Code No.: 3PWeight: 2.10 lbs./.95 kg.
Part No. 49410-12 Long Wide Handle Torque Limiting Reduces trailer damage by limiting over zealous tensioning. See pg. 36.
Breaking Strength: 11,000 lbs./4,990 kg.Working Load Limit: 3,666 lbs./1,663 kg.Code No.: CW Weight: 2.77 lbs./1.26 kg.
Part No. 48965-10
Breaking Strength: 22,000 lbs./10,000 kg.Working Load Limit: 7,333 lbs./3,333 kg.Code No.: BZWeight: 7.05 lbs./3.20 kg.
12.80
3.38
6.5
2.3
2.9 3.7 2.0
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Part No. 49349-10
Breaking Strength: 24,000 lbs./10,909 kg.Working Load Limit: 8,000 lbs./3,636 kg.Code No.: CLWeight: 7.95 lbs./3.61 kg.
Part No. 47105-11 Short Wide Handle
Breaking Strength: 11,000 lbs./5,000 kg.Working Load Limit: 3,666 lbs./1,666 kg.Code No.: 9QWeight: 2.20 lbs./1.0 kg.
Buckles
5.20(127.4 MM)
Ref
1.55(39 MM)
Ref
3.20(81.3 MM)
Ref2.09
(53 MM)Ref
Part No. 49715-10 Low Profile Torque Limiting Reduces trailer damage by limiting over zealous tensioning. See pg. 36.
Breaking Strength: 4,500 lbs./2,045 kg. Working Load Limit: 1,500 lbs./681 kg.Code: DA Weight: 1.56 lbs./.71 kg.
In addition to the trucking industry, Ancra
buckles are used in specialty markets that
include aircraft, marine, automotive, materials
handling and military applications. In each
case, material specifications have been
modified to give optimum performance for
the specific use.
Buckles
42
Overcenter Buckles
1-inch
Ancra Overcenter Buckles have one-piece steel frame construction for simple, efficient use. When attached tothe strap, the webbing provides a pad between the buckle and the secured cargo.
Part No. 42816-18Breaking Strength: 1,800 lbs./818 kg. Working Load Limit: 600 lbs./272 kg.Code: 4QWeight: .15 lb./.06 kg
Part No. 44639-12Breaking Strength: 5,000 lbs./2,272 kg.Working Load Limit: 1,666 lbs./757 kg.Code: 3NWeight: 1.20 lbs./.54 kg.
Part No. 44905-11Breaking Strength: 3,300 lbs./1,500 kg.Working Load Limit: 1,100 lbs./500 kg. Code:7QWeight: .20 lb./.10 kg.
2.23
5.52
.88
2-inch
1 3/4-inch
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Part No. 47800-10Breaking Strength: 5,000 lbs./2,272 kg.Working Load Limit: 1,666 lbs./757 kg.Code: 2UWeight: .70 lb./.31 kg.
Part No. 43172-11Breaking Strength: 3,000 lbs./1,363 kg.Working Load Limit: 1,000 lbs./454 kg.Code: 3EWeight: .75 lb./.34 kg.
43
1-inch
Part No. 40880-21Breaking Strength: 1,800 lbs./818 kg.Working Load Limit : 600 lbs./272 kg.Code: 5KWeight: .40 lb./18 kg.
Part No. 41030-10Breaking Strength: 500 lbs./227 kg.Working Load Limit: 166 lbs./75 kg.Code: 91Weight: .13 lb./.06 kg.
Part No. 42195-10Breaking Strength: 1,500 lbs./681 kg.Working Load Limit: 500 lbs./227 kg.Code: 5DWeight: .25 lb./.11 kg.
Part No. 40880-19Breaking Strength: 2,500 lbs./1,136 kg.Working Load Limit: 833 lbs./378 kg.Code: 6GWeight: .69 lb./.31 kg.
(2.14)
2.1 2.35
2.9
1.1
2-inch
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Roller BuckleA simple slide bar adjuster buckle for light-duty applications.
Part No. 41645-10 Roller BuckleBreaking Strength: 1,500 lbs./681 kg.Working Load Limit: 500 lbs./227 kg.Code: 9TWeight: .20 lb./10 kg.
3-Bar Slide AdjusterThis adjuster is designed to be used for adjustment of straplengths only, not for tensioning.
Part No. 48903-10 3-Bar Slide AdjusterBreaking Strength: 1,200 lbs./545 kg.Working Load Limit: 400 lbs./182 kg.Weight: .15 lb./.07 kg.
Buckles
Cam BucklesA one-piece frame design lengthens the service life of Ancra Cam Buckles. Quick and easy operation consists ofsimply pulling the handhold.
Attachment Hardware
4440
Ancra hooks, rings and loops are made to last. With heat treatment and corrosion-resistant plating or vinyl-coating, this quality attachment hardware is strong and durable.
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
2.98
1.98
3.90
0.50
1.40
1.00
2.90
1.0 (25)
2.98
1.98
3.90
0.50
1.40
1.00
2.90
1.0 (25)
Wire Hooks
2-inch Wide HookPart No. 40023-12Breaking Strength:
2,500 lbs./1,136 kg.Working Load Limit:
833 lbs./378 kg.Code: 10 Weight: .12 lb./.06 kg.
1-inch Narrow HookPart No. 40024-10Breaking Strength:
3,000 lbs./1,363 kg.Working Load Limit:
1,000 lbs./454 kg.Code: 21 Weight: .10 lb./.05 kg.
1-inch Narrow HookPart No. 40316-12Breaking Strength:
500 lbs./227 kg.Working Load Limit:
166 lbs./75 kg.Code: CR Weight:.10 lb./.05 kg.
2-inch Narrow HookPart No. 40024-12Breaking Strength:
2,500 lbs./1,136 kg.Working Load Limit:
833 lbs./378 kg.Code: 11 Weight: .10 lb./.05 kg.
1-inch S HookPart No. 41313-12Breaking Strength:
1,200 lbs./545 kg.Working Load Limit:
400 lbs./181 kg.Code: 41 Weight: .28 lb./.13 kg.
1-inch Light-Duty S HookPart No. 43095-10Breaking Strength:
500 lbs./227 kg.Working Load Limit: 1
66 lbs./75 kg.Code: 3G Weight: .14 lb./.07 kg.
.283
3.82
2.251.00
1.57
2-inch Narrow HookPart No. 43120-13Breaking Strength:
10,000 lbs./4,545 kg.Working Load Limit:
3,333 lbs./1,575 kg.Code: 5L Weight: .62 lb./.28 kg.
2-inch Narrow HookPart No. 43120-11Breaking Strength:
5,000 lbs./2,272 kg.Working Load Limit:
1,666 lbs./757 kg.Code: 2L Weight: .39 lb./.18 kg.
1-inch Vinyl S HookPart No. 41313-13Breaking Strength:
1,200 lbs./545 kg.Working Load Limit:
400 lbs./181 kg.Code 42 Weight: .29 lb./.14 kg.
1-3/4 inch Narrow HookPart No. 43120-19Breaking Strength:
1,500 lbs./680 kg.Working Load Limit:
500 lbs./227 kg.Code 5W Weight: .17 lb./.08 kg.
3-inch Narrow HookPart No. 43120-20Breaking Strength:
22,000 lbs./10,000 kg.Working Load Limit:
7,333 lbs./3,333 kg.Code: CF Weight: 1.39 lbs./.63 kg.
2.92
1.88
4.33
.79
.62
1.25 (30)
1-inch Gutter HookPart No. 43546-10Breaking Strength: 750 lbs./340 kg.Working Load Limit: 250 lbs./113 kg.Code: 9L Weight: .05 lb./.02 kg.
4541
Flat Hooks
1-inch Flat Hook with KeeperPart No. 40044-10Breaking Strength: 3,500 lbs./1,590 kg.Working Load Limit: 1,166 lbs./530 kg.Code: 3A Weight: .68 lb./.31 kg.
1.750
1.125
1.000 .320
2.00
.39
1-inch Plated Flat HookPart No. 40065-10Breaking Strength: 1,000 lbs./454 kg.Working Load Limit: 333 lbs./151 kg.Code: 20 Weight: .04 lb./.02 kg.
0.94
1.10
1.56
1.06
0.35
0.32
0.32
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
1-inch Vinyl Flat HookPart No. 40065-12Breaking Strength: 1,000 lbs./454 kg.Working Load Limit: 333 lbs./151 kg.Code: 4H Weight: .05 lb./.02 kg.
1.56
1.06
1.10
0.94
0.32
0.35
0.32
2-inch Flat HookPart No. 40891-18Breaking Strength: 10,000 lbs./4,545 kg.Working Load Limit: 3,333 lbs./1,515 kg.Code: 02 Weight: .68 lb./.31 kg.
2.56
1.90
3.56
1.9
.75 – .85
.58 – .62
2-inch Flat HookPart No. 41519-10Breaking Strength: 10,000 lbs./4,545 kg.Working Load Limit: 3,333 lbs./1,515 kg.Code: 5C Weight: 1.14 lbs./.52 kg.
4.02
1.25
0.41
3.00
2.03
1.15
0.37
3-inch Flat HookPart No. 41766-18Breaking Strength: 16,200 lbs./7,363 kg.Working Load Limit: 5,400 lbs./2,454 kg.Code: CP Weight: .98 lb./.45 kg.
2.17
3.75
3.25
.75
.191.4
.66
2-inch Flat HookPart No. 43099-10Breaking Strength: 5,000 lbs./2,272 kg.Working Load Limit: 1,666 lbs./757 kg.Code: 7C Weight: .40 lb./.18 kg.
3-inch Flat Hook with KeeperPart No. 41766-12Breaking Strength: 15,000 lbs./6,818 kg.Working Load Limit: 5,000 lbs./2,272 kg.Code: 3D Weight: 1.20 lbs./.55 kg.
Attachment Hardware
Ancra standard heavy duty flat hook strapshave wear clips to prevent abrasion.
Attachment Hardware
46
Snap Hooks
2-inch Snap HookPart No. 40084-14Breaking Strength: 6,300 lbs./2,863 kg. Working Load Limit: 2,100 lbs./954 kg.Code: O1 Weight: .34 lb./.15 kg.
2.40
1.80
0.40
4.25
RO.48
.125 THK
2-inch Snap Hook w/ Satin Black FinishPart No. 40758-11 Twisted VersionBreaking Strength: 10,000 lbs./4,545 kg. Working Load Limit: 3,333 lbs./1,515 kg.Code: 9D Weight: .59 lb./.27 kg.
1-inch Snap HookPart No. 43044-10Breaking Strength: 5,000 lbs./2,272 kg. Working Load Limit: 1,666 lbs./757 kg.Code: 5A Weight: .20 lb./.09 kg.
2.76
1.50
1.06
.160 THK
.515
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
2-inch Snap Hook w/ Satin Black FinishPart No. 40758-13Breaking Strength: 10,000 lbs./4,545 kg. Working Load Limit: 3,333 lbs./1,515 kg.Code: 1E Weight: .59 lb./.27 kg.
Rings
2-inch Delta RingPart No. 40978-11Breaking Strength: 10,000 lbs./4,545 kg. Working Load Limit: 3,333 lbs./1,515 kg.Code: 4O Weight: .28 lb./.13 kg.
3-inch Delta RingPart No. 45516-12Breaking Strength: 18,000 lbs./8,181 kg. Working Load Limit: 6,000 lbs./2,727 kg.Code: CJ Weight: 1.05 lbs./.48 kg.
3.90
3.1 .55
2-inch D-RingPart No. 40025-12Breaking Strength: 5,000 lbs./2,272 kg. Working Load Limit: 1,666 lbs./757 kg.Code: 12 Weight: .09 lb./.04 kg.
2-inch Snap HookPart No. 44887-12Breaking Strength: 5,000 lbs./2,272 kg. Working Load Limit: 1,666 lbs./757 kg.Code: CN Weight: .32 lb./15 kg.
4-inch Delta RingPart No. 41631-11Breaking Strength: 20,000 lbs./9,090 kg. Working Load Limit: 6,666 lbs./3,030 kg.Code: 2M Weight: 1.16 lbs./.53 kg.
1-Inch HookPart No. 44922-15Breaking Strength: 3,300 lbs./1,500 kg. Working Load Limit: 1,100 lbs./500 kg.Code: 1P Weight: .15 lb./.07 kg.
1-inch D-RingPart No. 40025-10Breaking Strength: 5,000 lbs./2,272 kg. Working Load Limit: 1,666 lbs./757 kg.Code 22 Weight: .05 lb./.02 kg.
Visit our website: www.ancra.com
47
Track FittingsDesigned to fit securely into Ancra Track, sturdy Ancra Track Fittings are easy touse and long wearing.
Series F Track FittingPart No. 40980-11Breaking Strength: 1,500 lbs./681 kg.Working Load Limit: 500 lbs./227 kg.Code: 09 Weight: .60 lb./.27 kg.
Part No. 40980-13For 1" hole diameter track (Canada)Code: CM Weight: .60 lb./.27 kg.
Slat Hook For use withAttachment Rails (Wooden Slats)
Part No. 41325-10Breaking Strength: 3,000 lbs./1,363 kg.Working Load Limit: 1,000 lbs./454 kg.Code: 30 Weight: .20 lb./.09 kg.
Series E & A 3-Piece Track FittingPart No. 41409-13Breaking Strength: 3,000 lbs./1,363 kg.Working Load Limit: 1,000 lbs./454 kg.Code: 6H Weight: .20 lb./.09 kg.
Series F Heavy-Duty Track HookPart No. 42012-12Breaking Strength: 2,400 lbs./1,090 kg.Working Load Limit: 800 lbs./363 kg.Code: CA Weight: .21 lb./.10 kg.
Series E & A Track Spring FittingPart No. 47608-21Breaking Strength: 3,000 lbs./1,363 kg.Working Load Limit: 1,000 lbs./454 kg.Code: 9V Weight: .30 lb./.14 kg.
Series E & A Fitting w/D-RingPart No. 49542-10Breaking Strength: 3,000 lbs./1,363 kg.Working Load Limit: 1,000 lbs./454 kg.Code: CV Weight: .32 lb./.15 kg.
.262.68
.53
1.17
Series E & A Articulated Track FittingPart No. 47772-12Breaking Strength: 3,000 lbs./1,363 kg.Working Load Limit: 1,000 lbs./454 kg.Higher loads achievable in different directions of pull andusing stronger track configurations.Code: 6U Weight: .45 lb./.20 kg.
2.98
1.50
2.00
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Attachment Hardware
2.83
.28
.50
3.13
2.01
Attachment Hardware
Chain Attachments
Grab Hook Assembly, PlatedPart No. 43365-12Breaking Strength: 16,200 lbs./7,363 kg.Working Load Limit: 5,400 lbs./2,454 kg.Code: CK Weight: 1.60 lbs./.73 kg.
Chain Anchor w/ Pear Shaped RingPart No. 43366-12Breaking Strength: 16,200 lbs./7,363 kg.Working Load Limit: 5,400 lbs./2,454 kg.Code: CG Weight: 3.30 lbs./1.50 kg.
Chain Anchor with Delta Ring, PlatedPart No. 43366-14Breaking Strength: 16,200 lbs./7,363 kg.Working Load Limit: 5,400 lbs./2,454 kg.Code: CH Weight: 3.40 lbs./1.55 kg.
1.502.5
17.010.35
.88
RTJ Cluster HookPart No. 45515-10Code: 2P Weight: 2.25 lbs./1.02 kg.
Hook Type Breaking Strength Working Load Limit
R (Ford) 25,000 lbs./11,363 kg. 8,333 lbs./3,787 kg.
T (General Motors, Chrysler) 16,000 lbs./7,272 kg. 5,333 lbs./2,424 kg.
J (Foreign) 12,000 lbs./5,454 kg. 4,000 lbs./1/818 kg.
.38
.38
.43
2.3
48IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.
REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
3.25
10.35
17.0
2.5
All Ancra products and components are fully tested tomeet our exacting standards.
Our commitment to quality is never ending
Part No Size Breaking Strength Working Load Limit Weight
45946-10 5/16" 18,800 lbs./8,545 kg. 4,700 lbs./2,132 kg. 0.85 lb./0.39 kg.
45946-11 3/8" 26,400 lbs./12,000 kg. 6,600 lbs./2,994 kg. 1.10 lbs./0.50 kg.
45946-13 1/2" 51,000 lbs./23,133 kg. 12,750 lbs./5,783 kg. 2.29 lbs./1.04 kg.
Clevis Hook
Part No. A B C D
45946-10 2.30" 0.43" 0.38" 0.38"
45946-11 2.70" 0.50" 0.44" 0.48"
45946-13 3.20" 0.66" 0.75" 0.63"
Dimensions
Specifications
49
Aircraft Style Seat/Logistic Track
Heavy-Duty Flanged Track
Single Stud Track Fitting
100.00
.265
2.000 4.000 .005
.12
(2.000)
(.580) (2.000)
Double Stud Track Fittingwith Round Ring
Ancra designs and manufactures a full spec-trum of restraints and hardware to meet yourwide-ranging needs. Our specialty items represent our ongoing mission to provide theright solutions for a changing industry. If youcan’t find a specific product in this catalog, orif you have a particular requirement that callsfor a unique solution, give us a call. Our cus-tomization capabilities can be your assurancethat you have Ancra quality for all your cargorestraint applications.
Part No. 40467-33-144 12' longWeight: 6.30 lbs./2.86 kg.
Single Stud/VerticalBreaking Strength: 4,000 lbs./1,818 kg.Working Load Limit: 1,333 lbs./605 kg.
Double Stud/VerticalBreaking Strength: 8,500 lbs./3,863 kg.Working Load Limit: 2,833 lbs./1,287 kg.
Part No. 48967-12 100" longWeight: 5.60 lbs./2.55 kg.
Single Stud/VerticalBreaking Strength: 6,000 lbs./2,727 kg.Working Load Limit: 2,000 lbs./909 kg.
Double Stud/VerticalBreaking Strength: 10,000 lbs./4,545 kg.Working Load Limit: 3,333 lbs./1,515 kg.
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Part No. 40340-27Breaking Strength: 4,000 lbs./1,818 kg.*Working Load Limit: 1,333 lbs./605 kg.Code: CEWeight: .09 lb./.04 kg.*Load rating varies with the angle of pull.
Part No. 47556-11Breaking Strength: 5,000 lbs./2,272 kg.Working Load Limit: 1,666 lbs./757 kg.Code: 5VWeight: .35 lb./.16 kg.
1.12
2.08
.78 1.14 2.40
2.75
1.75 DIARef
Specialty Hardware
Width Breaking Strength Working Load Type
Standard WebbingPart No.in./mm. Capacity Limit Type Color Code
in. mm. lbs. kg. lbs. kg.
1.00 25 4,500 2,045 1,500 681 Nylon Blue N5 41820-14-RL
2.00 50 6,000 2,727 2,000 909 PolyesterYellow
P79 47200-61-RL
2.00 50 6,000 2,727 2,000 909 PolyesterGray
P78 47200-60-RL
2.00 50 6,000 2,727 2,000 909 Polyester Blue P80 47200-62-RL
2.00 50 12,000 5,454 4,000 1,818 Polyester, Yellow
P1 41632-13-RLLatex Treated
3.00 75 18,000 8,181 6,000 2,727 Polyester, Yellow
P3 41632-14-RLLatex Treated
4.00 100 20,000 9,090 6,666 3,030 Polyester, Yellow
P5 43797-12-RLLatex Treated
4.00 100 24,000 10,909 8,000 3,636 Polyester, Yellow
P7 41632-15-RLLatex Treated
4.00 100 24,000 10,909 8,000 3,636 Polyester,Blue
P83 41632-33-RLLatex Treated
Webbing
Along with exceptional quality, Ancra’sbroad line of webbing gives you a range of choices to match your application.Custom-made according to our strict specifications, Ancra webbing is treated for extra strength and durability, offeringadditional flexibility and ease of use.
50IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.
REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
Webbing will have a longer life if stored in a dry, dark location. Continuous exposure to ultra-violet light can degrade the strength of synthetic webbing.
Webbing Characteristics
Nylon’s elongation characteristics make it suitable for slings and tow straps, but less desirable for heavy-duty tiedowns. It displays good UV,abrasion, alkaline resistance and color fast properties.
Polyester is well suited for webbing because of its low cost, high-strength,and resistance to abrasion. It also withstands acid environments andresists elongation in high-moisture applications. Its durability and abrasionresistance can be increased even further with coatings of latex or othermaterials. Call customer service for specific details and color availability.
51
General Information
Ancra offers complete solutions in:
Customer Assistance:
■ Bar coding on standard products
■ EDI electronic order and payment
processing
■ Technical training manuals
■ CD ROM marketing material assistance
■ Point of purchase decals, banners and
selling aids
Engineering and Technical Services:
■ Product development – Mechanical,
Electrical, Pneumatic
■ Design and drawing check – 3D solids
and models
■ Stress analysis and substantiation –
NASTRAN FEA
■ New product testing and evaluation
■ Document control and distribution
■ Configuration management and control
Quality assurance:
■ Product inspection
■ Vendor qualifications
■ Internal and supplier audits
■ FAA compliance
■ Product and lot testing
General Information
Breaking StrengthThe minimum load a component or assembly will withstand
before failure.
Working Load LimitThe maximum load a component or assembly should be sub-
jected to during routine use. For your safety, Ancra recommends
that “working load capacity” not exceed one-third (1/3) the com-
ponent and/or assembly “breaking strength capacity.”
Rated Load CapacityRatings are generally established and/or regulated by industry
or legislative standards and may vary from industry to industry.
For example, the 1987 California Highway Patrol rating for
flatbed tiedowns is established at 70% of the breaking strength
capacity of web binders or 80% of the breaking strength capac-
ity or force required to cause permanent distortion of compo-
nent hardware, whichever is less.
Note: All strengths referenced in this catalog unless noted, are
based on a straight pull application.
Strength of strap assembly can be doubled when used in a loop
application.
Important Notice:It is the owner’s and user’s responsibility to determine suitability
of a product for any particular use. Check all applicable industry,
trade association, federal, state and local regulations. Read all
operating instructions and warnings carefully.
All ratings shown in this catalog are based on the product
being new, and used in normal environmental conditions.
Special consideration must be given to item selection when
unusual conditions can be expected. Particular caution should
be exercised to avoid exposing the product to sharp edges or
acids.
Products are subject to age, wear, and deterioration, all of
which cause a reduction in the product’s breaking strength
capacity. We recommend that all products be regularly inspected.
Any worn, deformed, misused or overloaded products should
be replaced immediately.
Remember! The component with the lowest breaking strength
capacity in the entire restraint system will probably fail first.
Each component of the entire system plays an important part in
restraining cargo. It is important that tiedowns be attached to
components that are of sufficient strength to properly secure the
load. For example, if one anchors a standard web binder
assembly with a rated load capacity of 12,000 lbs. to a device
with a breaking strength capacity of 5,000 lbs., then that system
will fail at 5,000 lbs.
We believe that those who purchase and use these products
must understand the correct application and strength of the
Ancra products purchased.
WarrantyAll Ancra International LLC products are warranted to be free from defects in material or workmanship fora period of three (3) months from date of shipment. During this period Ancra International LLC will at itsoption repair or replace without charge any products or part thereof found to be defective in material orworkmanship. This warranty does not extend to any product which has been subject to misuse, abuse,negligence, accident, alteration or unauthorized repair.
Defective products must be returned to Ancra International LLC within the above period, transportationprepaid. Ancra will bear the cost of return transportation. Contact Customer Service for details.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING BUTNOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULARPURPOSE. IN NO EVENT WILL ANCRA INTERNATIONAL LLC BE LIABLE FOR SPECIAL, INDIRECT ORCONSEQUENTIAL DAMAGES OR LOSS OF VEHICLE, CARGO OR PROFITS.
Specifications
52
The purpose of this catalog is to assist our customers and users in the selection of cargorestraint products suitable for their specific applications. But because we continuously striveto offer new and improved products, part numbers and specifications are subject to change.Please contact your Ancra representative or our customer service department for any newinformation.
Industry Standards
Ancra has provided the following information as a service to our cus-tomers as well as end-users. This information is intended to promotethe safe and informed sales and use of our products.
SYNTHETIC WEB TIEDOWNS SHALL BE USED IN ACCORDANCEWITH ALL STATE, FEDERAL, PROVINCIAL, LOCAL AND INDUSTRY REGULATIONS, AS APPLICABLE.
U.S. Department of Transportation regulations subchapter B-MotorCarrier Safety Regulations, 49 CFR, Part 393, Paragraph 393.102 (b)requires that : “The aggregate working load limit of the tiedownassemblies used to secure an article against movement in anydirection must be at least 1/2 times the weight of that article.”
15,000 LBS Break Strength=5,000 LBS WLL3
It is the responsibility of the user to determine the proper WorkingLoad Limit (WLL) requirement for specific applications. User shallconsult vehicle manufacturer for anchorage strength rating.
An example using this regulation follows:– Determine the number of synthetic web tiedowns required
when using the Working Load Limit (WLL) value marked on the Synthetic web tiedown assembly.
– Weight of article being secured is 24,000 LBS (10,910 KG).– Working Load Limit of the 3 inch synthetic web tiedown is
4,000 LBS (1,820 kg) as marked on the label. – Required Aggregate WLL
1/2 x 24,000 LBS (Article Weight)=12,000 LBS (5,455 KG).
– 12,000 LBS (1/2 x Article Weight)=34,000 LBS (Web Tiedown WLL)
A minimum of 3 synthetic web tiedowns is required to secure anarticle, based only on the weight of the article.
Factors to be considered when determining the number andlocation of synthetic web tiedowns, as specified by state, federal,provincial local and industry regulations are:• Article weight• Configuration of load to be secured (pipe, coil, equipment,
stacking, etc.• Number of tiers• Length of load to be secured• Minimum number of synthetic web tiedowns required• Stakes, blocking and bracing• Tension in the synthetic tiedown shall never exceed the WLL
strength rating of anchorage• Any other factors that may affect safe securement of the load
during normal and emergency conditions
Operating ProceduresThis section provides recommended guidelines for the operation,care (maintenance), use and inspection of synthetic web tiedowns.
Mechanical Considerations• Determine weight of the cargo to be secured, including
expected Dynamic “G” forces.• Select synthetic web tiedowns having suitable characteristics
for the type of load and environment.• Synthetic web tiedown assemblies shall not be loaded in
excess of their Working Load Limit (WLL). Consideration should be given to the angle from the vertical (cargo tiedown to load angle), which affects working load limit capacity.
• Synthetic web tiedown shall be attached to provide control of the load, and positioned in accordance with applicable regulations.
• Synthetic web tiedown assemblies shall not be dragged on thefloor, ground, or over an abrasive surface.
• Synthetic web tiedown shall not be tied in knots, or joined by knotting.
• Synthetic web tiedowns shall not be pulled from under loads if the load is resting on the tiedown.
• Synthetic web tiedowns shall always be protected from being cut by sharp corners, sharp edges, protrusions or abrasive surfaces.
• Synthetic web tiedowns shall not be dropped.• The opening in fittings shall have the required shape and size to
insure that the fitting will sit properly in the vehicle anchorage orother attachments. If the anchorage is inadequate to support the rating of the synthetic web tiedown assembly, then the load rating will be limited to the strength of the anchorage.
• Synthetic web tiedowns shall not be used for lifting. Lifting includes raising, lowering and suspending.
• Before operating any tiedown assembly, the user shall secure his footing to prevent slipping or falling.
• In freezing temperatures caution shall be exercised when operating frozen tiedown assemblies
• A minimum of two (2) wraps of webbings shall be on the winch or ratchet buckle mandrel. Caution: Additional wraps of web-bing on the mandrel will reduce the working load limit of the winch or ratchet buckle.
When tightening or loosening winches, always maintain a firm gripon the winch bar. Never release a winch bar without checking thepawl to ensure that it is fully engaged between ratchet teeth. Releasing a winch bar without the pawl being properly engagedcan cause serious injury to the user or bystanders. The use of aslip resistant handle winch bar specifically designed to tighten orloosen winches is recommended. Only winch bars designed to beused with winches shall be used to tension and release thetiedown.
“Cheater Bars” (“extenders”) shall not be used with the winchbars. User shall stand clear (to one side) of the winch bar handleduring operation of the winch bar in case the winch bar slips. Thetip of the winch bar shall be inserted through both holes in the endcap to prevent the winch bar from “slipping out” and overloadingthe tip and or end cap.
Synthetic web tiedowns shall be used, checked and adjustedduring the transportation of cargo per applicable federal, state,provincial, local and industry regulations.
Environmental ConsiderationsEnvironments in which synthetic web tiedowns are continuouslyexposed to ultra-violet sunlight can effect the strength in varyingdegrees ranging from slight to total degradation.
53
*The FMCSA has published its final rule on standards for protectionagainst shifting and falling cargo 49 CFR Parts 392 and 393:Rule is effective Dec. 26, 2002. Compliance due by Jan. 2004. Thisstandard focuses on crash avoidance types of cargo securementrules. Several new additions to old standard: Section 392.9 (b)(2) -Inspection is required within 50 miles versus old standard of 25 miles.Section 393.102 (a) - Securement must withstand .8 deceleration inforward direction: .5 deceleration in rearward and lateral direction.Sections 393-116 through 393-136 call out specific securementrequirements by commodity type.
IT IS THE OWNER’S AND USER’S RESPONSIBILITY TO DETERMINE SUITABILITY OF A PRODUCT FOR ANY PARTICULAR USE.REMEMBER, ALL STRAP ASSEMBLIES OR SYSTEMS ARE AS STRONG AS THEIR WEAKEST COMPONENT INCLUDING THE POINT OF ATTACHMENT.
General Information
Out-of-Service Criteria (Replacement)Criteria for placing vehicles out of service at roadside inspections has been established jointly by the U.S. Department of Transportation and the Commercial Vehicle Safety Alliance and took effectApril 1, 1996. A vehicle will be placed out of service if 25% or more of its tiedowns are loose ormissing, or are defective. Synthetic web tiedowns shall be removed from service if any of the following are visible:
Informed SourcesU.S. Department of Transportation Federal Highway Administration(FHWA) Federal Motor Carrier Safety RegulationsFMCSRs 0, Title 49 of the Code of FederalRegulations (CFR): Sections 392.9, SafeLoading; Part 393, Subpart 1 ProtectionAgainst Shifting of Falling Cargo. Copiesmay be purchased from the U.S. Govern-ment Printing Office, (202) 512-1800. Forspecific questions, you can contact theFHWA at: 400 Seventh Street, SW, Washington, D.C., 20590. Phone (202) 366-4009 Fax (202) 366-8842 Website: www.fhwa.dot.gov
California Highway Patrol (CHP) Title 13Barclays Law Publisher, 50 California St., 18th Floor, San Francisco, CA 94111-4624Telephone (800) 888-3600Fax (415) 732-8861Website: www.chp.ca.gov
Holes, tears, cuts, snags
Broken or worn stitching in load
bearing sew patterns
Excessive abrasive wear Melting or charring of the tiedown, or
weld splatter on the tiedown
Chemical burns
Tear in webbing or fitting
54
Web Sling & Tiedown Association (WSTDA)5024-R Campbell Blvd.Baltimore, MD 21236Telephone (410) 931-8100Fax (410) 931-8111Website: www.wstda.com
Commercial Vehicle Safety Alliance (CVSA)Cargo Securement Tiedown Guidelines. 5430 Grosvenor Ln., Ste. 130Bethesda, MD 20814Telephone (301) 564-1623Fax (301) 564-0588Website: www.cvsa.org
Specialized Carriers & Rigging Association2750 Prosperity Ave., Ste. 620Fairfax, VA 22031-4312Telephone (703) 698-0291Fax (703) 698-0297Website: www.scranet.org
Truck Trailer Mfg. Association (TTMA)1020 Princess St., Alexandria, VA 22314Telephone (703) 549-3010Fax (703) 549-3014
CanadaThe Ministry of Transportation in each ProvinceWebsite: www.mto.gov.on.ca
MexicoDir. General de Transporte Terreste Sub-Director de Inspection del Transporte(Rep. En el CVSA)Calzada de las BombasNo. 411-11-PisoCol. San Bartolo CoapaMexico, D.F.C.P. 04500
Glossary
55
Anchor Point The location to which a tiedown is attached to a vehicle. If the anchor point is inadequateto support the force of the tiedown system, then the load rating of the tiedown will be limited to the strength of the anchor point.
Breaking Strength The tensile load in pounds or kilograms at which any part of the synthetic web tiedown assembly fails.
Bulked Nylon Qualitative term to describe textured nylon yarn
Cargo All articles or material carried by a vehicle, including those used in operation of the vehicle.
Chain Load Binder A binder incorporating an overcenter locking action.
Cross-Docking The movement of goods directly from receiving dock to shipping dock to eliminate storage expense.
Cubic Capacity The carrying capacity of a piece of equipment according to measurement in cubic feet.
Cyclic Test A test to determine the cyclic life or acceptable cyclic rating of a tiedown component or assembly.
Design Factor The ratio of the breaking strength to the Working Load Limit (WLL) assigned to each synthetic web tiedown assembly.
Direct Tiedown A tiedown that is intended to provide direct resistance to potential shift of an article.
Elongation The length of stretch at a specific amount of pull divided by the original length multiplied by 100%.
Fabrication Efficiency The synthetic web tiedown assembly break strength, as a percentage of the webbing strength prior to fabrication.
Heavy Duty Truck Truck with a gross vehicle weight generally in excess of 19,500 pounds (class 6-8). Other minimum weights are used by various laws or government agencies.
Indirect Tiedown A tiedown whose tension is intended to increase the pressure of an article or stack of articles on the deck of the vehicle.
Keeper A device used on a hook to prevent the hook from inadvertently releasing.
Length The distance between extreme end bearing points of the synthetic web tiedown assembly,including the fittings.
Proof Load Test A non-destructive load test of a web tiedown assembly to some multiple of the working load limit of a web tiedown assembly.
Selvage The woven or knitted edge of synthetic webbing, so formed to prevent raveling.
Sew/Stitch Pattern The pattern of the stitches used to sew the webbing together.
Shoring Bar A structural section placed transversely between the walls of a vehicle to prevent cargo from tipping or shifting.
Stuffer A longitudinal load bearing yarn in webbing.
Ultimate (Destructive) Test A straight tensile load test of the synthetic web tiedown assembly tested to failure. The
failure load is the average breaking strength value of minimum of five (5) test samples.
Winch A device for tensioning a webbing or wire rope tiedown that is fitted with means to lock the initial tension.
Working Load Limit This is the maximum combined static and dynamic load in pounds or kilograms that shallbe applied in direct tension to a straight and undamaged tiedown assembly.
Glossary
General Information
56
Innovative Teamwork Solutions
When we start a project with you, we develop shared objectives based on your specific goals and objectives.
Our completely digital systems provide a turn-key solution for your requirements. We view your requirements from
all angles. With over 250 years of industry experience, we don’t automatically reach for the easy answers. The
innovative solutions we’ve developed are a result of looking at each new project from a fresh perspective.
We envision the global picture, and we sweat the details. Each part is tested and tested again against the
highest standards of quality, reliability and durability.
Through every step of the process, we work as a team with you. We continue to provide technical support after
our products have been installed.
Web Sling & Tiedown Association
(WSTDA)
National Truck Equipment Association
(NTEA)
Technology & Maintenance Council
(TMC)
Truck Trailer Manufacturers Association(TTMA)
Associated Wire Rope Fabricators(AWRF)
Commercial Vehicle Safety Alliance (CVSA)
Association of American Railroads(AAR)
National Trailer Dealers Association(NTDA)
Ancra International
Aircraft Interiors &
Cargo Fittings
This catalog provides a full
selection of the very best air-
craft fittings and components,
all made in the U.S.A. by
Ancra for over 25 years.
Request Catalog #402
Ancra International
most-requested
trucking hardware
Ancra showcases the most
popular solutions for flatbed and
interior van cargo-restraints. A
mini catalog of proven winches,
straps, tie-offs, beams and bars.
Also available in French.
Request Brochure 212A
Ancra International
Lift-A-Deck
Ancra’s proprietary Lift-A-Deck
decking systems enables
optimum utilization of cargo
space in vans, trucks and
trailers.
Request Brochure
Ancra International
Retract-A-Roll
Ancra’s Retract-A-Roll
pneumatic roller conveyor
system allows for easier
material handling.
Request Brochure
Literature Available by Request
Trade Associations
57
Index by Part Number
40023-12 Wire Hook, Wide—2"-2,500 lbs. . . . . . . . . . . . . . . . . . . . . . .4440024-10 Wire Hook, Narrow—1"-3,000 lbs. . . . . . . . . . . . . . . . . . . . .4440024-12 Wire Hook, Narrow—2"-2,500 lbs. . . . . . . . . . . . . . . . . . . . .4440025-10 D-Ring—1" - 5,000 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4640025-12 D-Ring—2" - 5,000 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4640044-10 1-inch Flat Hook w/ keeper . . . . . . . . . . . . . . . . . . . . . . . . . .4540065-10 Flat Hook—1" -1,000 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . .4540065-12 1-inch Vinyl Flat Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4540084-14 Snap Hook—2" - 5,000 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .4640316-12 Wire Hook, Narrow—1"-500 lbs. . . . . . . . . . . . . . . . . . . . . . .4440340-27 Single Stud Track Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . .4940386-10 Rope Tie Off-Series E (3 piece End Fitting) . . . . . . . . . . . . .3340386-11 Rope Tie Off-Series E (Spring Actuated Fitting) . . . . . . . . .3340386-12 Rope Tie Off-Series F-1,500 lbs. . . . . . . . . . . . . . . . . . . . . .3340386-13 Rope Tie-Off, Series F . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3340467-33-144 Heavy Duty A/C Track 12' . . . . . . . . . . . . . . . . . . . . . . . . . .4940602-10 Series E Assembly w/ 3 pc end fitting-12' . . . . . . . . . . . . . .3440602-11 Series E Assembly w/ 3 pc end fitting-16' . . . . . . . . . . . . . .3440602-12 Series E Assembly w/ 3 pc end fitting-20' . . . . . . . . . . . . . .3440602-17 Series E Strap Assembly -1 pc end - 12' . . . . . . . . . . . . . . .3440602-18 Series E Strap Assembly -1 pc end - 16' . . . . . . . . . . . . . . .3440602-19 Series E Strap Assembly -1 pc end - 20' . . . . . . . . . . . . . . .3440602-20 Series F Strap Assembly—Cam Buckle-12' . . . . . . . . . . . . .3440602-21 Series F Strap Assembly—Cam Buckle-16' . . . . . . . . . . . . .3440602-22 Series F Strap Assembly—Cam Buckle-20' . . . . . . . . . . . . .3440602-23 Slat Strap Assembly—Cam Buckle-12' . . . . . . . . . . . . . . . . .3440602-24 Slat Strap Assembly—Cam Buckle-16' . . . . . . . . . . . . . . . . .3440602-25 Slat Strap Assembly—Cam Buckle-20' . . . . . . . . . . . . . . . . .3440602-94 Interior Van Straps-12' . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2340602-95 Interior Van Straps-16' . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2340602-96 Interior Van Straps-20' . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2340758-11 Snap Hook, Twisted—2" - 10,000 lbs. . . . . . . . . . . . . . . . . .4640758-13 Snap Hook—2"- 10,000 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .4640838-10 Series E Vertical Track (Green) 10' . . . . . . . . . . . . . . . . . . . .2640838-11 Series E Vertical Track (Galvanized) 10' . . . . . . . . . . . . . . . .2640849-14 Series F Track (Galvanized) 10', 1.62" Hole spacing . . . . . .2740880-19 Cam Buckle—2"- 2,500 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .4340880-21 Cam Buckle—1"-1,800 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .4340891-18 Flat Hook—2" -10,000 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .4540921-10 Beam Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2940921-11 Beam Socket Heavy Duty . . . . . . . . . . . . . . . . . . . . . . . . . . .2940978-11 Delta Ring—2" - 10,000 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .4640980-11 Track Fitting Series F-1,500 lbs. . . . . . . . . . . . . . . . . . . . . . .4740980-13 Track Fitting Series F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4740985-05-12 Web Protector-Cordura Sleeve—12" Long . . . . . . . . . . . . . .2040985-05-RL Web Protector-Cordura Sleeve-Bulk . . . . . . . . . . . . . . . . . . .2041030-10 Cam Buckle—1" - 500 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .4341048-10 Ancra Red Motorcycle Strap—1"x5.5' . . . . . . . . . . . . . . . . .3841048-23 Ancra Red Motorcycle Strap—1"x13' . . . . . . . . . . . . . . . . . .3841313-12 S-Hook, Plated—1"-1,200 lbs. . . . . . . . . . . . . . . . . . . . . . . .4441313-13 S-Hook, Vinyl—1"-1,200 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .4441325-10 Slat Hook-3,000 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4741332-29 LAD II Beam Extrusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2341338-10 Attaching Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2841338-12 Attaching Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2841409-13 Series E End Fitting (3 Piece) 3,500 lbs. . . . . . . . . . . . . . . .4741516-11 Corner Protector—2"-Aluminum . . . . . . . . . . . . . . . . . . . . . .2041519-10 Flat Hook—2" -10,000 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .4541569-10 Rubber Tie-50 per Box 9" . . . . . . . . . . . . . . . . . . . . . . . . . . .2041569-15 Rubber Tie-50 per Box 15" . . . . . . . . . . . . . . . . . . . . . . . . . .2041569-21 Rubber Tie-50 per Box 21" . . . . . . . . . . . . . . . . . . . . . . . . . .2041569-31 Rubber Tie-50 per Box 31" . . . . . . . . . . . . . . . . . . . . . . . . . .2041569-41 Rubber Tie-50 per Box 41" . . . . . . . . . . . . . . . . . . . . . . . . . .2041631-11 Delta Ring—4" - 20,000 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .4641632-13-RL 2"-12,000 lbs.Yellow-yd . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5041632-14-RL 3"-18,000 lbs.Yellow-yd . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5041632-15-RL 4" 24,000 lbs.Yellow-yd . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5041632-33-RL 4" 24,000 lbs. Blue-yd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5041643-10 General Purpose Strap-12' . . . . . . . . . . . . . . . . . . . . . . . . . .3641643-11 General Purpose Strap-15' . . . . . . . . . . . . . . . . . . . . . . . . . .3641643-12 General Purpose Strap-21' . . . . . . . . . . . . . . . . . . . . . . . . . .3641645-10 Roller Buckle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4341659-10-27 2"x27' Strap w/40891-18 Flat Hook . . . . . . . . . . . . . . . . . . .1141659-10-30 2"x30' Strap w/40891-18 Flat Hook . . . . . . . . . . . . . . . . . . .11
41659-11-27 2"x27' Strap w/40978-11 Delta Ring . . . . . . . . . . . . . . . . . . .1141659-11-30 2"x30' Strap w/40978-11 Delta Ring . . . . . . . . . . . . . . . . . . .1141660-10-27 3"x27' Strap w/41766-18 Flat Hook . . . . . . . . . . . . . . . . . . .1241660-10-30 3"x30' Strap w/41766-18 Flat Hook . . . . . . . . . . . . . . . . . . .1241660-11-27 3"x27' Strap w/45516-12 Delta Ring . . . . . . . . . . . . . . . . . . .1241660-11-30 3"x30' Strap w/ 45516-12 Delta Ring . . . . . . . . . . . . . . . . .1241660-13-27 3"x27' Strap w/43365-12 Grab Hook . . . . . . . . . . . . . . . . . .1241660-13-30 3"x30' Strap w/43365-12 Grab Hook . . . . . . . . . . . . . . . . . .1241660-14-27 3"x27' Strap w/43366-14 Chain Anchor . . . . . . . . . . . . . . . .1241660-14-30 3"x30' Strap w/43366-14 Chain Anchor . . . . . . . . . . . . . . . .1241681-10 Combo Winch-Std Bottom Mount . . . . . . . . . . . . . . . . . . . . . .841681-10-RC SilverCap Winch-Combo Std Bottom Mount . . . . . . . . . . . . .541691-10 Web Winch-Leg Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . .641691-12 Cable Leg Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .841696-10 Cable Winch-End Mount-RH . . . . . . . . . . . . . . . . . . . . . . . . . .841696-11 Cable Winch-End Mount-LH . . . . . . . . . . . . . . . . . . . . . . . . . .841766-12 Flat Hook- 3" w/ keeper . . . . . . . . . . . . . . . . . . . . . . . . . . . .4541766-18 Flat Hook—3" -16,200 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .4541808-11 Ratchet Buckle—1 3/4"-6,600 lbs. . . . . . . . . . . . . . . . . . . . .4041820-14-RL Nylon -1"-4,500 lbs. Blue-yd . . . . . . . . . . . . . . . . . . . . . . . . .5042012-12 Series F HD Track Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . .4742098-11 Corner Protector—3"-Rubber . . . . . . . . . . . . . . . . . . . . . . . .2042098-12 Corner Protector—4"-Rubber . . . . . . . . . . . . . . . . . . . . . . . .2042195-10 Cam Buckle—1"-1,500 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .4342313-10 Winch Bar-Std. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1142313-12 Winch Bar-Combination Box End . . . . . . . . . . . . . . . . . . . . .1142313-17 Winch Bar-Std. Chrome . . . . . . . . . . . . . . . . . . . . . . . . . . . .1142313-19 Winch Bar - Combination Chrome . . . . . . . . . . . . . . . . . . . .1142313-20 Winch Bar - Combination Painted . . . . . . . . . . . . . . . . . . . . .1142357-11 Winch Track-6' Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .742357-21 Winch Track-6' Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . .742816-18 Overcenter Buckle—1"-1,800 lbs. . . . . . . . . . . . . . . . . . . . . .4242948-10 Series A Horizontal Track (Green) 10' . . . . . . . . . . . . . . . . .2743044-10 Snap Hook—1" - 5,000 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .4643095-10 S-Hook, Plated—1"-500 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .4443099-10 Flat Hook—2"-5,000 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . . . .4543120-11 Wire Hook, Narrow—2"-5,000 lbs. . . . . . . . . . . . . . . . . . . . .4443120-13 Wire Hook, Narrow—2"-10,000 lbs. . . . . . . . . . . . . . . . . . . .4443120-19 1-3/4" Narrow Wire Hook . . . . . . . . . . . . . . . . . . . . . . . . . . .4443120-20 Wire Hook, Narrow—3"-22,000 lbs. . . . . . . . . . . . . . . . . . . .4443172-11 Overcenter Buckle—2" - 3,000 lbs. . . . . . . . . . . . . . . . . . . . .4243320-32 Ratchet Buckle—1"-4,400 lbs. . . . . . . . . . . . . . . . . . . . . . . .4043320-33 Ratchet Buckle—1" w/Bolt & Nut-4,400 lbs. . . . . . . . . . . . . .4043365-12 Grab Hook Assembly, Plated—16,200 lbs. . . . . . . . . . . . . . .4843366-12 Chain Anchor w/ Pear Shaped Ring—16,200 lbs. . . . . . . . .4843366-14 Chain Anchor w/ Delta Ring,—16,200 lbs. . . . . . . . . . . . . . .4843488-20 Combo Winch-Low Profile Side Mount . . . . . . . . . . . . . . . . . .843488-20-RC SilverCap Winch-Combo Low Profile . . . . . . . . . . . . . . . . . . .543546-10 Gutter Hook—1" - 750 lbs. . . . . . . . . . . . . . . . . . . . . . . . . . .4543563-10 Web Winch-Bottom Mount-Std . . . . . . . . . . . . . . . . . . . . . . . .643563-10-RC SilverCap Winch-Standard Bottom Mount . . . . . . . . . . . . . . .443564-12 Web Winch-Bottom Mount-Std. Storage Portable w/2SS . . . .643564-12-RC SC Winch-Bottom Mount-Std. Storage Portable w/2SS . . . . .443564-14 Web Winch-Bottom Mount-Std. Portable w/2SS . . . . . . . . . . .643564-14-RC SC Winch-Bottom Mount-Std. Portable w/2SS . . . . . . . . . . . .443564-16 Web Winch-Side Mount-Low Profile Portable w/2SS . . . . . . .643564-16-RC SC Winch-Side Mount-Low Profile Portable w/2SS . . . . . . . .443565-12 Web Winch-Deep Storage Bottom Mount C Track . . . . . . . . .743565-12-RC SC Winch-Deep Storage Bottom Mount- Slider . . . . . . . . . . .543565-13 Standard Double Cap- Slider . . . . . . . . . . . . . . . . . . . . . . . . .743565-14 Deep Storage w/ Side Washers C Track . . . . . . . . . . . . . . . . .743565-14-RC SC Deep Storage w/ Side Washers C Track . . . . . . . . . . . . . .543565-15 Web Winch-Std Bottom Mount C Track . . . . . . . . . . . . . . . . .743565-15-RC SC Winch-Std. Bottom Mount C Track . . . . . . . . . . . . . . . . . .543573-10 Web Winch-Bottom Mount-Std. Storage . . . . . . . . . . . . . . . .643573-10-RC SC Winch-Bottom Mount-Std. Storage . . . . . . . . . . . . . . . . . .443573-11 Web Winch-Bottom Mount-Std. Storage 2" Spool . . . . . . . .643573-11-RC SC Winch-Bottom Mount-Std. Storage 2" Spool . . . . . . . . .443573-12 Web Winch-Bottom Mount-Std. Storage 3" Spool . . . . . . . . .643573-12-RC SC Winch-Bottom Mount-Std. Storage 3" Spool . . . . . . . . . . .443573-13 Web Winch-Bottom Mount-Std. Storage 4" Spool . . . . . . . . .643573-13-RC SC Winch-Bottom Mount-Std. Storage 4" Spool . . . . . . . . . . .443579-20 Web Winch-Side Mount-Low Profile . . . . . . . . . . . . . . . . . .643579-20-RC SC Winch-Side Mount-Low Profile . . . . . . . . . . . . . . . . . . .4
Index by Part Number
43627-13 Replacement Channel Assembly . . . . . . . . . . . . . . . . . . . . .2843638-50 Decking/Shoring Beam Series E . . . . . . . . . . . . . . . . . . . . .2843638-51 Decking/Shoring Beam Series E – 92"-102.9" Long . . . . . .2843775-15 Tube (1-1/2"x77")-Long Aluminum . . . . . . . . . . . . . . . . . . . .3243775-22 Tube, Fixed End, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3243781-14 Foot, Fixed End (Long) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3243781-15 Foot, Adjustable End (Short) . . . . . . . . . . . . . . . . . . . . . . . .3243781-16 Foot, Fixed End (Square) . . . . . . . . . . . . . . . . . . . . . . . . . . .3243781-17 Foot, Adjustable End (Square) . . . . . . . . . . . . . . . . . . . . . . .3243782-15 Cargo Sta-Standard-89.75" to 104.5" Long . . . . . . . . . . . . .3043795-10-27 4"x27' Strap w/41766-18 Flat Hook . . . . . . . . . . . . . . . . . . .1243795-10-30 4"x30' Strap w/41766-18 Flat Hook . . . . . . . . . . . . . . . . . . .1243795-11-27 4"x27' Strap w/41631-11 Delta Ring . . . . . . . . . . . . . . . . . . .1243795-11-30 4"x30' Strap w/41631-11 Delta Ring . . . . . . . . . . . . . . . . . . .1243795-13-27 4"x27' Strap w/Half Twisted Loop . . . . . . . . . . . . . . . . . . . . .1243795-13-30 4"x30' Strap w/Half Twisted Loop . . . . . . . . . . . . . . . . . . . . .1243795-14-27 4"x27' Strap w/43365-12 Grab Hook . . . . . . . . . . . . . . . . . .1243795-14-30 4"x30' Strap w/43365-12 Grab Hook . . . . . . . . . . . . . . . . . .1243795-15-27 4"X27' Strap w/43366-14 Chain Anchor . . . . . . . . . . . . . . . .1243795-15-30 4"x30' Strap w/43366-14 Chain Anchor . . . . . . . . . . . . . . . .1243795-80-27 4"x27' Winch Strap w/ Flat Hook . . . . . . . . . . . . . . . . . . . . .1343795-80-30 4"x30' Winch Strap w/ Flat Hook . . . . . . . . . . . . . . . . . . . . .1343795-81-30 4"x30' Winch Strap w/ Delta Ring . . . . . . . . . . . . . . . . . . . . .1343795-83-30 4"x30' Winch Strap w/ Half Twisted Loop . . . . . . . . . . . . . . .1343795-85-30 4"x30' Winch Strap w/ Chain Anchor . . . . . . . . . . . . . . . . . .1343797-12-RL 4" 20,000 lbs.Yellow-yd . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5043887-10 Mini Ratchet Strap—1"x16'-Display Packaged . . . . . . . . . . .3843887-11 Mini Ratchet Strap—1"x20'-Display Packaged . . . . . . . . . . .3843908-10 Combo Winch-Recessed Box . . . . . . . . . . . . . . . . . . . . . . . . .843986-10 Corner Protector—4"-Plastic . . . . . . . . . . . . . . . . . . . . . . . . .2043991-10 Hoop Set—Cargo Sta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3043997-10 Combo Winch-Low Profile Leg Mount . . . . . . . . . . . . . . . . . .843997-10-RC SC Winch-Combo Winch-Leg Mount-Low Profile . . . . . . . . . .544102-11 H2 Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1144122-10 Corner Iron Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1144232-10 Ratchet Buckle—1"-1,200 lbs. . . . . . . . . . . . . . . . . . . . . . . .4044258-13 Ratchet Buckle—2"-4,500 lbs. - Low Profile . . . . . . . . . . . . .4144340-10 Strap Assy—1"-Cam Buckle-10' w/Wire Hooks . . . . . . . . . .3844340-11 Strap Assy—1"-Ratchet Buckle-10' w/Wire Hooks . . . . . . . .3844466-10 Combo Winch-2" Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .844557-10 Ancra Lash R/B Strap—1"x15'-Bulk . . . . . . . . . . . . . . . . . . .3844557-11 Ancra Lash R/B Strap—1"x15'-Display Packaged . . . . . . . .3844587-10 Ratchet Buckle—2"-11,000 lbs.-Long Wide Handle . . . . . . .4144627-11 Ratchet Buckle—2"-10,000 lbs.-Standard Handle . . . . . . . .4144639-12 Overcenter Buckle—5,000 lbs. . . . . . . . . . . . . . . . . . . . . . . .4244887-12 Snap Hook—2" - 5,000 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .4644905-11 Overcenter Buckle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4244922-15 1-inch Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4644926-10 Ocean Transport Strap—Overcenter Buckle-80" . . . . . . . . .3645143-20 Soft Tiedowns- Basket Strap . . . . . . . . . . . . . . . . . . . . . . . .3745515-10 Cluster Hook (RTJ)—16,200 lbs. . . . . . . . . . . . . . . . . . . . . .4845516-12 Delta Ring—3" - 18,000 lbs. . . . . . . . . . . . . . . . . . . . . . . . . .4645545-15 Pan Fitting w/Black Trim Collar . . . . . . . . . . . . . . . . . . . . . . .3345801-10 Web Winder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1145849-13 Recessed Pan Fitting 5,000 lbs. . . . . . . . . . . . . . . . . . . . . . .3345867-12 Garment Beam—96" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2945867-13 Garment Beam—102" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2945880-10 Load Binder Chain- 5/16" Bulk, 4,700 lbs. WLL . . . . . . . . . .1545880-11 Load Binder Chain- 3/8" Bulk, 6,600 lbs. WLL . . . . . . . . . . .1545880-13 Load Binder Chain- 1/2" Bulk . . . . . . . . . . . . . . . . . . . . . . . .1545881-10-16 Load Binder Chain - 5/16" w/ Clevis Hooks . . . . . . . . . . . .1545881-10-20 Load Binder Chain - 5/16" w/ Clevis Hooks . . . . . . . . . . . .1545881-10-25 Load Binder Chain - 5/16" w/ Clevis Hooks . . . . . . . . . . . .1545881-11-16 Load Binder Chain - 3/8" w/ Clevis Hooks . . . . . . . . . . . . .1545881-11-20 Load Binder Chain - 3/8" w/ Clevis Hooks . . . . . . . . . . . . .1545881-11-25 Load Binder Chain - 3/8" w/ Clevis Hooks . . . . . . . . . . . . .1545881-13-20 Load Binder Chain - 1/2" w/ Clevis Hooks . . . . . . . . . . . . .1545881-13-25 Load Binder Chain - 1/2" w/ Clevis Hooks . . . . . . . . . . . . .1545943-10 Chain Load Binder - 5/16" Lever 5,400 lbs. WLL . . . . . . . . .1545943-11 Chain Load Binder - 3/8" Lever 9,200 lbs. WLL . . . . . . . . . .1545943-13 Chain Load Binder - 1/2" Lever 11,300 lbs. WLL . . . . . . . . .1545943-14 Chain Recoilless Load Binder w/Lever 5/16" Lever . . . . . . .1545943-20 Chain Load Binder - 5/16" Ratchet 5,400 lbs. WLL . . . . . . .1545943-21 Chain Load Binder - 3/8" Ratchet 9,200 lbs. WLL . . . . . . . .15
45943-23 Chain Load Binder - 1/2" Ratchet 11,300 lbs. WLL . . . . . . .1545946-10 5/16" Clevis Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 4845946-11 3/8" Clevis Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 4845946-13 1/2" Clevis Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 4845951-11 Trigger Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2945951-12 Flat Latch Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2945982-10 27' Ratchet Strap w/40891-18 Flat Hooks . . . . . . . . . . . . . .1645982-11 30' Ratchet Strap w/40891-18 Flat Hooks . . . . . . . . . . . . . .1645982-14 27' Ratchet Strap w/43365-12 Grab Hooks . . . . . . . . . . . . .1645982-15 27' Ratchet Strap w/43366-12 Chain Anchors . . . . . . . . . . .1645982-16 27' Ratchet Strap w/40978-11 Delta Rings . . . . . . . . . . . . .1645982-19 27' Ratchet Strap w/40758-11 Snap Hooks . . . . . . . . . . . . .1645982-33 30' Ratchet Strap w/43365-12 Grab Hooks . . . . . . . . . . . . .1645982-34 30' Ratchet Strap w/43366-12 Chain Anchors . . . . . . . . . . .1645982-35 30' Ratchet Strap w/40978-11 Delta Rings . . . . . . . . . . . . .1645982-36 30' Ratchet Strap w/40758-11 Snap Hooks . . . . . . . . . . . . .1645982-42 27' Ratchet Strap w/ 43120-11 Wire Hooks . . . . . . . . . . . . .1645982-43 30' Ratchet Strap w/43120-11 Wire Hooks . . . . . . . . . . . . . .1647105-11 Ratchet Buckle – 2"-11,000 lbs.-Short Wide Handle . . . . . .4147200-60-RL Polyester – 2"-6,000 lbs.-Grey-yd . . . . . . . . . . . . . . . . . . . . .5047200-61-RL Polyester – 2"-6,000 lbs.-Yellow-yd . . . . . . . . . . . . . . . . . . . .5047200-62-RL Polyester – 2"-6,000 lbs.-Blue-yd . . . . . . . . . . . . . . . . . . . . .5047209-10 3-Pc. Cargo Sta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3047235-10 Series F Channel – 10' (1.62" Hole Spacing) . . . . . . . . . . . .2747235-15 Series F Channel – 7-1/2' (1" Hole Spacing) . . . . . . . . . . . .2747523-13 Housing Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3247524-12 Tube, Adjustable End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3247556-11 Double Stud Track Fitting w/ Round Ring . . . . . . . . . . . . . . .4947608-21 Series E Track Fitting-3,500 lbs. . . . . . . . . . . . . . . . . . . . . . .4747640-30 Lashing Winch – 11,000 lbs. w/ Double Hex Drive . . . . . . . . .747670-10 Decking Beam Hoops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2847772-12 Series E Articulated Track Fitting . . . . . . . . . . . . . . . . . .33, 4747800-10 Overcenter Buckle – 1-3/4" - 5,000 lbs. . . . . . . . . . . . . . . . .4247934-11 Soft Tiedowns-Wheel Dolly Strap . . . . . . . . . . . . . . . . . . . . .3747935-11 Soft Tiedowns-Wheel Dolly Strap . . . . . . . . . . . . . . . . . . . . .3747970-10 27' Ratchet Strap w/40891-18 Flat Hooks . . . . . . . . . . . . . .1747970-11 30' Ratchet Strap w/40891-18 Flat Hooks . . . . . . . . . . . . . .1747971-10 27' Ratchet Strap w/40891-18 Flat Hooks . . . . . . . . . . . . . .1747971-11 30' Ratchet Strap w/40891-18 Flat Hooks . . . . . . . . . . . . . .1748101-10 Web Winch – 3-Bar Low Profile . . . . . . . . . . . . . . . . . . . . . . .648101-10-SG-RC SilverCap Winch – 3-Bar Low Profile . . . . . . . . . . . . . . . . . . .448101-14 3-Bar Standard Winch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .648101-14-SG-RC SilverCap Winch – 3-Bar Standard . . . . . . . . . . . . . . . . . . . . .448111-10 Series A Vertical Track (Green) 10' . . . . . . . . . . . . . . . . . . . .2748117-21-120.00 Series E Horizontal Track-10' (Galvanized) . . . . . . . . . . . . .2648117-25-120.00 Series E Horizontal Track-10' (Green) . . . . . . . . . . . . . . . . .2648253-13 Ratchet Buckle Strap w/ Wire Hook- 12' . . . . . . . . . . . . . . . .3548253-14 Ratchet Buckle Strap w/ Wire Hook- 16' . . . . . . . . . . . . . . . .3548253-15 Ratchet Buckle Strap w/ Wire Hook- 20' . . . . . . . . . . . . . . . .3548253-16 Ratchet Buckle Strap w/ Flat Hook- 12' . . . . . . . . . . . . . . . .3548253-17 Ratchet Buckle Strap w/ Flat Hook- 16' . . . . . . . . . . . . . . . .3548253-18 Ratchet Buckle Strap w/ Flat Hook- 20' . . . . . . . . . . . . . . . .3548253-19 Cam Buckle Strap w/ Wire Hook- 12' . . . . . . . . . . . . . . . . . .3548253-20 Cam Buckle Strap w/ Wire Hook- 16' . . . . . . . . . . . . . . . . . .3548253-21 Cam Buckle Strap w/ Wire Hook- 20' . . . . . . . . . . . . . . . . . .3548253-22 Cam Buckle Strap w/ Flat Hook- 12' . . . . . . . . . . . . . . . . . . .3548253-23 Cam Buckle Strap w/ Flat Hook- 16' . . . . . . . . . . . . . . . . . . .3548253-24 Cam Buckle Strap w/ Flat Hook- 20' . . . . . . . . . . . . . . . . . . .3548407-10 Economy Cargo-Sta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3048407-14 Economy Cargo-Sta -Square Bolt-on Feet . . . . . . . . . . . . . .3048672-13 Series E Ratchet Strap -1 pc end-12' . . . . . . . . . . . . . . . . . .3548672-14 Series E Ratchet Strap -1 pc end-16' . . . . . . . . . . . . . . . . . .3548672-15 Series E Ratchet Strap -1 pc end-20' . . . . . . . . . . . . . . . . . .3548672-16 Interior Van Straps-12' . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2348672-17 Interior Van Straps-16' . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2348672-18 Interior Van Straps-20' . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2348672-33 Torque Limiting Ratchet Strap- 12' . . . . . . . . . . . . . . . . . . . .3648672-34 Torque Limiting Ratchet Strap- 16' . . . . . . . . . . . . . . . . . . . .3648672-35 Torque Limiting Ratchet Strap- 20' . . . . . . . . . . . . . . . . . . . .3648770-10 Ratchet Buckle – 1"-1,500 lbs. . . . . . . . . . . . . . . . . . . . . . . .4048783-10 Web Winch – Bottom Mount Std. - Double Cap . . . . . . . . . . .648903-10 3-Bar Slide Adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 48922-10 2" x 18" Fixed End Strap w/ Flat Hook & Loop End . . . . . . .1948922-11 3" x 18" Fixed End Strap w/ Flat Hook & Loop End . . . . . . .19
58
Index by Part Number
48922-12 4" x 18" Fixed End Strap w/ Flat Hook & Loop End . . . . . . .1948922-13 2" x 18" Fixed End Strap w/ Wire Hook & Loop End . . . . . .1948922-15 4" x 18" Fixed End Strap w/ Wire Hook & Loop End . . . . . .1948922-17 3" x 33" Fixed End Strap w/ Chain Anchor & Loop End . . . .1948922-18 4" x 33" Fixed End Strap w/ Chain Anchor & Loop End . . . .1948222-20 3" x 18" Fixed End Strap w/ Grab Hook & Loop End . . . . . .1948922-24 4" x 18" Fixed End Strap w/ Delta Ring & Loop End . . . . . .1948936-10 Auto Tiedown/RO/RO Strap, Series E-12' . . . . . . . . . . . . . .3748965-10 Ratchet Buckle—3"-22,000 lbs. . . . . . . . . . . . . . . . . . . . . . .4148967-12 Heavy Duty Flanged A/C Track - 100" . . . . . . . . . . . . . . . . .4948968-11 Container Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4548987-20 27' Ratchet Strap w/ Flat Hooks-15,000 lbs. . . . . . . . . . . . .1748987-21 30' Ratchet Strap w/ Flat Hooks-15,000 lbs. . . . . . . . . . . . .1748987-22 27' Ratchet Strap w/ Grab Hooks-16,200 lbs. . . . . . . . . . . .1748987-23 30' Ratchet Strap w/ Grab Hooks-16,200 lbs. . . . . . . . . . . .1748987-24 27' Ratchet Strap w/ Chain Anchors-16,200 lbs. . . . . . . . . .1748987-25 30' Ratchet Strap w/ Chain Anchors-16,200 lbs. . . . . . . . . .1749015-18 18" Door Pull Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3349015-24 24" Door Pull Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3349015-36 36" Door Pull Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3349020-20 6' Auto Tiedown Strap w/ Snap Hooks . . . . . . . . . . . . . . . . .3749020-21 8' Auto Tiedown Strap w/ Snap Hooks . . . . . . . . . . . . . . . . .3749020-22 12" Auto Tiedown Strap w/ Snap Hooks . . . . . . . . . . . . . . . .3749021-20 Series E HD Ratchet Buckle Strap-12' . . . . . . . . . . . . . . . . .3549021-21 Series E HD Ratchet Buckle Strap-16' . . . . . . . . . . . . . . . . .3549021-22 Series E HD Ratchet Buckle Strap-20' . . . . . . . . . . . . . . . . .3549021-30 Torque Limiting Ratchet Strap- 12' . . . . . . . . . . . . . . . . . . . .3649021-31 Torque Limiting Ratchet Strap- 16' . . . . . . . . . . . . . . . . . . . .3649021-32 Torque Limiting Ratchet Strap- 20' . . . . . . . . . . . . . . . . . . . .3649023-20 Auto Tiedown -Series E w/RTJ Hooks- 6' . . . . . . . . . . . . . . .3749023-21 Auto Tiedown-Series E w/ RTJ Hooks- 8' . . . . . . . . . . . . . . .3749023-22 Auto Tiedown-Series E w/ RTJ Hooks-12' . . . . . . . . . . . . . .3749025-20 Electronic Straps-12' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3449025-21 Electronic Straps-16' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3449025-22 Electronic Straps-20' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3449039-50 HD Series E Beam Assy-83.7"-94.7" . . . . . . . . . . . . . . . . .2849039-51 HD Series E Beam Assy-91.9"-102.9" . . . . . . . . . . . . . . . .2849039-52 HD Series E Beam Assy-94.8"-105.8" . . . . . . . . . . . . . . . .2849205-26 H D Jack Bar, One Piece Galvanized . . . . . . . . . . . . . . . . . .3149205-27 H D Jack Bar, One Piece Galvanized w/ Hoops . . . . . . . . . .3149205-31 Universal Jack Bar, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . .3149207-12 Web Winch – Storable Double L Track Slider . . . . . . . . . . . . .749207-12-RC SilverCap Winch – Storable Double L Track Slider . . . . . . . . .549207-13 Web Winch – Standard Double L Track Slider . . . . . . . . . . . .749207-13-RC SilverCap Winch – Standard Double L Track Slider . . . . . . . .549207-18 Low Profile Double L Track Slider . . . . . . . . . . . . . . . . . . . . . .749207-18-RC SilverCap Winch – Low Profile Double L Track Slider . . . . . .549207-19 3-Bar Slider Winch w/ Side Washers . . . . . . . . . . . . . . . . . . .749211-10 Rubber Rope Hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2049242-10-120 Winch Track – 10' Aluminum Double L . . . . . . . . . . . . . . . . . .749313-13 Series F Track (Galvanized) 10', 1" Notched Holes Canada .2749344-10 Coil Rack – Light Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1449344-12 Coil Rack – Heavy Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . .1449345-10 Floor Chain Tiedown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1549346-10 27' Ratchet Strap w/ Flat Hooks. . . . . . . . . . . . . . . . . . . . . .1849346-11 30' Ratchet Strap w/ Flat Hooks. . . . . . . . . . . . . . . . . . . . . .1849346-12 27' Ratchet Strap w/ Narrow Wire Hooks. . . . . . . . . . . . . . .1849346-13 30' Ratchet Strap w/ Narrow Wire Hooks. . . . . . . . . . . . . . .1849346-14 27' Ratchet Strap w/ Chain Anchor. . . . . . . . . . . . . . . . . . . .1849346-15 30' Ratchet Strap w/ Chain Anchor. . . . . . . . . . . . . . . . . . . .1849346-16 27' Ratchet Strap w/ Delta Ring . . . . . . . . . . . . . . . . . . . . . .1849346-17 30' Ratchet Strap w/ Delta Ring . . . . . . . . . . . . . . . . . . . . . .1849347-10 2" x 18" Fixed End Strap w/ Flat Hook & Ratchet . . . . . . . .1949347-11 2" x 25' Strap w/ Flat Hooks . . . . . . . . . . . . . . . . . . . . . . . . .1949347-12 2" x 28' Strap w/ Flat Hooks . . . . . . . . . . . . . . . . . . . . . . . . .1949347-13 3" x 18" Strap w/ Flat Hook & Ratchet . . . . . . . . . . . . . . . . .1949347-14 3" x 25' Strap w/ Flat Hooks . . . . . . . . . . . . . . . . . . . . . . . . .1949347-15 3" x 28' Adjustable End Strap w/ Flat Hook . . . . . . . . . . . . .1949347-16 4" x 18" Strap w/ 41766-18 Flat Hook & Ratchet . . . . . . . . .1949347-17 4" x 25' Strap w/41766-18 Flat Hooks-15,000 lbs. . . . . . . . .1949347-18 4" x 28' Strap w/41766-18 Flat Hooks-15,000 lbs. . . . . . . . .1949347-19 2" x 18" Fixed End Strap w/ Wire Hook & Buckle . . . . . . . . .1949347-20 2" x 25' Adjustable End Strap w/ 43120-13 Wire Hook . . . .1949347-21 2" x 28' Adjustable End Strap w/ 43120-13 Wire Hook . . . .19
49347-25 4" x 18" Fixed End Strap w/ Wire Hook & Buckle . . . . . . . . .1949347-26 4" x 25' Adjustable End Strap w/ Wire Hook . . . . . . . . . . . .1949347-27 4" x 28' Adjustable End Strap w/ Wire Hook . . . . . . . . . . . .1949347-31 3" x 33" Fixed End Strap w/ Chain Anchor & Buckle . . . . . .1949347-32 3" x 25' Adjustable End Strap w/ Chain Anchor . . . . . . . . . .1949347-33 3" x 28' Adjustable End Strap w/ Chain Anchor . . . . . . . . . .1949347-34 4" x 33" Fixed End Strap w/ Chain Anchor & Buckle . . . . . .1949347-35 4" x 25' Adjustable End Strap w/ Chain Anchor . . . . . . . . . .1949347-36 4" x 28' Adjustable End Strap w/ Chain Anchor . . . . . . . . . .1949347-40 3" x 18" Fixed End Strap w/ Grab Hook & Buckle . . . . . . . .1949347-41 3" x 25' Adjustable End Strap w/ Grab Hook . . . . . . . . . . . .1949347-42 3" x 28' Adjustable End Strap w/ Grab Hook . . . . . . . . . . . .1949347-52 4" x 18" Fixed End Strap w/ Delta Ring & Buckle . . . . . . . .1949347-53 4" x 25' Adjustable End Strap w/ Delta Ring . . . . . . . . . . . .1949347-54 4" x 28' Adjustable End Strap w/ Delta Ring . . . . . . . . . . . .1949348-10 Cargo Bar Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3249349-10 Ratchet Buckle—4"-24,000 lbs. . . . . . . . . . . . . . . . . . . . . . .4149359-10 Series A Horizontal Track- Aluminum 10' . . . . . . . . . . . . . . .2749360-53 Decking/Shoring Beam Steel Series E-102" Long . . . . . . . .2849363-10-72.00 Low Profile Single Row S-Track . . . . . . . . . . . . . . . . . . . . . .2349363-14 Low Profile Single Row Flanged S-Track . . . . . . . . . . . . . . .2349363-15 Double Row Flanged S-Track . . . . . . . . . . . . . . . . . . . . . . . .2349368-10 15' Ratcheting Tiedowns . . . . . . . . . . . . . . . . . . . . . . . . . . . .3849368-11 6' Cam Buckle Tiedowns . . . . . . . . . . . . . . . . . . . . . . . . . . .3849368-12 Combo Pack- 2 Cam Buckle/ 2 Ratcheting . . . . . . . . . . . . .3849371-10 Stake Pocket Anchor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3349377-10 Corner Protector- 4" Steel . . . . . . . . . . . . . . . . . . . . . . . . . .2049379-10 Tube, Fixed End, Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3249382-10 Transmat 3'x3' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3349382-11 Transmat 3'x1900' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3349382-12 Transmat 1'x5' w/Handholds . . . . . . . . . . . . . . . . . . . . . . . . .3349384-11 Beam Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2349400-10 Jack Assembly Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3249410-12 Ratchet Buckle 2"- 11,000 lbs. Torque Limiting . . . . . . . . . .4149414-14 LAD Decking Beams: 96-inch w/ Standard Foot . . . . . . . . .2349414-15 LAD Decking Beams: 102-inch w/ Standard Foot . . . . . . . .2349414-16 LAD Decking Beam: 96-inch w/ Off-set Foot . . . . . . . . . . . .2349414-17 LAD Decking Beam: 102-inch w/ Off-set Foot . . . . . . . . . . .2349414-53 LAD Channel and Foot Assembly . . . . . . . . . . . . . . . . . . . . .2349414-54 LAD Channel w/Off-set Foot Assembly . . . . . . . . . . . . . . . .2349439-10 Shoring Bar F Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2949439-11 Shoring Bar (1" track Canada) . . . . . . . . . . . . . . . . . . . . . . .2949439-20 Shoring Bar, F Series-Square . . . . . . . . . . . . . . . . . . . . . . . .2949439-21 Square Shoring Bar (1" track Canada) . . . . . . . . . . . . . . . . .2949445-10 Beam Release Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2349454-10 Rubber Rope-3/8" Hollow Core . . . . . . . . . . . . . . . . . . . . . .2049454-11 Rubber Rope-3/8" Solid Core . . . . . . . . . . . . . . . . . . . . . . . .2049454-12 Rubber Rope-7/16" Hollow Core . . . . . . . . . . . . . . . . . . . . .2049454-13 Rubber Rope-7/16" Solid Core . . . . . . . . . . . . . . . . . . . . . . .2049512-10 Qwik Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3849526-10 Roll-On/ Roll-Off Container Straps . . . . . . . . . . . . . . . . . . . .1349527-10 GlideLock for Double L Track . . . . . . . . . . . . . . . . . . . . . . . .1449527-13 GlideLock for Standard C Winch Track . . . . . . . . . . . . . . . . .1449542-10 Series E & A Fitting w/ D Ring . . . . . . . . . . . . . . . . . . . .33, 4749562-13-72.00 LAD Standard Single Row S-Track . . . . . . . . . . . . . . . . . . . .2349577-10 Corner Protector—3" Steel . . . . . . . . . . . . . . . . . . . . . . . . . .2049583-10 Floor Chain Tiedown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1549584-10 Corner Protector—4" Plastic . . . . . . . . . . . . . . . . . . . . . . . . .2049706-10 Standard Slider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .749706-11 Low Profile Slider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .749715-10 2" Low Profile TLR Buckle . . . . . . . . . . . . . . . . . . . . . . . . . .4149716-10 PortaWinch w/ Outward off-set . . . . . . . . . . . . . . . . . . . . . . .1049716-10-RC PortaWinch w/ Outward off-set, SilverCap . . . . . . . . . . . . .1049716-11 PortaWinch w/ Inward off-set (curtain siders) . . . . . . . . . . . .1049716-11-RC PortaWinch w/ Inward off-set SilverCap . . . . . . . . . . . . . . . .1049717-10 PortaAnchor w/ Outward off-set . . . . . . . . . . . . . . . . . . . . . .1049717-11 PortaAnchor w/ Inward off-set (curtain siders) . . . . . . . . . . .1049723-10 SilverCap OverDrive Ratcheting Cap . . . . . . . . . . . . . . . . . . .5
59
Index by Product Name
60
Anchor, Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48Bar, Beam Release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23Bars, Cargo Sta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Bars, Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Bars, Winch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Beam Replacement Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Beam Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29Beam Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23Beam, Garment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29Beams, Decking/Shoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Binder, Ratchet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Binder, Recoilless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Buckles, Cam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43Buckles, Overcenter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42Buckles, Ratchet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Cam Buckle Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Cam Buckles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43Cargo Bar Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32Cargo Sta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Cargo Sta Replacements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32Cargo Sta, Hoop Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Chain Anchor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48Chain Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Chain Load Binder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Chain Load Binder, Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Chain Load Binder, Ratchet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Channel Assembly, Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Clevis Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Coil Racks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Corner Protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Decking Beam Hoops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Decking/ Shoring Beams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Door Pull Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Dumpster Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Electronic Restraint Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34F Series- Shoring Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29Fittings, Pan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Flat Hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45Floor Chain Tiedown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Garment Beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29General Purpose Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36GlideLock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14Grab Hook Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48Holder, Cargo Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32Hook, Clevis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Hook, Corner Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Hook, Grab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48Hook, H-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Hook, RTJ Cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48Hook, Rubber Rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Hooks, Flat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45Hooks, Snap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42Hooks, Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44Hoop Set, Cargo Sta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Hoops, Decking Beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Jack Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Lift-A-Deck II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22Load Jack Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Mini Ratchet Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Nets, Custom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Ocean Transport Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Overcenter Buckles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42Pan Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Pin, Beam Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Plate Trailer Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35PortaAnchor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10PortaWinch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Protectors, Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Protectors, Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Ratchet Buckle Strap Replacements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Ratchet Buckle Strap, Series E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Ratchet Buckle Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Ratchet Buckles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-18, 35
Ratcheting Cap, OverDrive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Retract-A-Roll II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24, 25Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46Roll-On/Roll Off Container Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Rope Tie Offs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Rope, Rubber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20RTJ Cluster Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48Rubber Rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Rubber Rope Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Rubber Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Series A Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Series E Heavy Duty Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Series E Ratchet Buckle Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Series E Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26Series E Transit Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37Series F Channel Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Series F Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Shoring Bar- F Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29SilverCap winches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4SilverCap OverDrive Ratcheting Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Snap Hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42Socket, Beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29Stake Pocket Anchor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Strap, Ancra Lash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Strap, General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Strap, HD Ratchet Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Strap, LD Cam Buckle Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Strap, Mini Ratchet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Strap, Motorcycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Strap, Ocean Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Strap, Series E Heavy Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Strap, Series E Transit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37Straps, Ancra BLUE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Straps, Cam Buckle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Straps, Container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Straps, Door Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Straps, Electronic Restraint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Straps, Plate Trailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Straps, Ratchet Buckle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Straps, Torque Limiting Ratchet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Straps, Winch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11,12Tiedown, Floor Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Tiedowns, Auto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36, 37Tiedowns, Cam Buckle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Tiedowns, Combo Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Tiedowns, Ratcheting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Tiedowns, Soft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37Ties, Rubber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Torque Limiting Ratchet Buckle Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Track Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47Track, Heavy Duty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49Track, Series A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Track, Series E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26Track, Series F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Track, Series F Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27Transmat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Trash Bin Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Trigger Repair Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29Web Protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20Web Winder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Webbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50Webbing, Ancra BLUE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Winch Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Winch Straps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11, 12Winch Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Winches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Winches, Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Winches, Combination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Winches, Lashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Winches, PortaWinch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10Winches, SilverCap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4Winches, Sliders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Winder, Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Wire Hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
CORPORATE HEADQUARTERS
Ancra International LLC4880 W. Rosecrans AvenueHawthorne, CA 90250Phone: 310-973-5000Phone Toll Free: 1-800-973-5092Fax: 310-973-3488
CARGO SYSTEMS DIVISION HEADQUARTERS
Ancra Cincinnati2685 Circleport DriveErlanger, KY 41018Fax: 1-800-347-2627Phone Toll Free (U.S.): 1-800-233-5138Phone Toll Free (Canada): 1-800-929-2627E-mail: [email protected]
WAREHOUSE/ SHIPPING FACILITIES
Ancra West4880 W. Rosecrans AvenueHawthorne, CA 90250U.S.A.
Ancra Cincinnati2685 Circleport DriveErlanger, KY 41018Fax: 1-800-347-2627Phone Toll Free: 1-800-233-5138
Website: www.ancra.com
© Ancra International 2006 Printed in U.S.A. 6/06
selected for performance and durability,
to offer you the most cost-effective,
reliable solutions.
You need to know.
When you choose Ancra cargo
restraint products, there’s safety in
numbers. Our capacity measurements
for components and assemblies are
the numbers that reflect dependable,
quality design and construction.
Throughout this catalog, these capacity
measurements will appear next to our
products. Their definitions offer you
even greater assurance that Ancra
systems are engineered with an
understanding of your requirements
and a commitment to your safety,
and to the success of your business.
When you’re on the road, the security
of having the best cargo restraint
system on your load means everything.
Ancra designs and manufactures
components and assemblies with your
security in mind. We make our products
from the finest quality materials, with
attention to every engineering detail.
Our webbing is constructed from
advanced performance nylon and
polyester, and our hardware is
specifically designed and manufactured
to meet your exacting requirements.
All component parts and materials are
Ancra InternationalThere’s strength in the name
Pacific NorthwestAccord Distributors9822 47th Avenue SWLakewood, WA 98499
CanadaGday Warehouse2150 Steeles Avenue, Unit 7Brampton, Ontario L6T 1A7
Designer and Manufacturer
of Cargo Restraint Systems
CARGO SYSTEMS DIVISION HEADQUARTERS
Ancra Cincinnati
2685 Circleport Drive
Erlanger, KY 41018
Fax: 1-800-347-2627
Phone Toll Free (U.S.): 1-800-233-5138
Phone Toll Free (Canada): 1-800-929-2627
Website: www.ancra.com
E-mail: [email protected]
Catalog No. 210D