Deluxe WirelessStereo Headphones

INSTRUCTION MANUAL

Model No. EL6645

Please read carefully before use and keep for future referenceImported and distributed by Easylife Group Ltd, London NW1 0JP Support Line: 0333 030 0777For more innovative products from Easylife please visit: www.easylifegroup.com

IN6645 © 2019 Easylife Group LtdSupport Line: 0333 030 0777

For more innovative products from Easylife please visit: www.easylifegroup.com

PANTONE 072 CPANTONE 123 C

everyday solut ions

™

Est. 1992

everyday solut ions

™

Est. 1992

Listencomfortably

for hours!

Technical SpecificationsTransmitterTransmitting frequency: 86MHzModulation mode: FMEffective Distance: up to 10mPower Supply: 2xAAA batteries (not included) or DC 4.5V (optional)

HeadphonesFrequency: 86MHz (for wireless headphone)FM radio: 87.5-108MHzDistortion: < 2%Power Supply: 2xAAA batteries (not included)

DISPOSAL• Pleaserespecttheenvironment!• Disposeofthepackagingaccordingtothelocalrecyclingregulations.• Disposeoftheapplianceattheendofitslifespanaccordingtoenvironmentalconsideration.

Important Safety Information

• Please read this instruction manual carefully before use.• Donotusetheproductinsituationswhichrequirespecialattention(e.g.intrafficorwhenperforming

skilled jobs)• Always keep the product dry and do not expose it to extreme temperatures.• Use the product with care and store it in a clean, dust-free environment.• Switch the headphones off after use to conserve battery power.• Remove the batteries if not in use for a long period of time.• Toreducetheriskoffireorelectricshock,donotusetheproductnearwateranddonotexposeittorainor

moisture.• OnlyuseDCadaptorpowersourceasspecifiedinthismanual• Unplug the power supply unit from the wall socket - to completely disconnect the product from the mains

during lightning storms or when unused for long periods of time.• Ensure that the power supply unit is in a safe operating condition and easily accessible, properly plugged

into the wall socket, only operated within the permissible temperature range, not covered or exposed to direct sunlight for longer periods of time in order to prevent heat accumulation.

• Do not operate the product near any heat sources. Note: Replace the batteries if the following occur:

• The transmitter indicator becomes dim.• The reception gets poor.• The volume gets weak and the sound is distorted.Note: Use new batteries all of the same brand

PANTONE 072 CPANTONE 123 C

everyday solut ions

™

Est. 1992

2

A. HEADPHONES1. Battery Compartment2. Switch On/Off (Volume Control)3. SCAN button4. Power indicator (Lights up when on)5. RESET button6. Audio Jack

FrontRearLeft Right

B. TRANSMITTER7. Power Indicator (Lights up when on)8. Switch On/Off9. DC IN10. Audio In Jack11. Battery Compartment (bottom)

Support Line: 0333 030 0777For more innovative products from Easylife please visit: www.easylifegroup.comeveryday solut ions

™

Est. 1992

Inserting the batteries

Release the battery cover on the left side of headphones (Fig 1) and on the base of transmitter (Fig 2), insert two AAA batteries (not included) into each battery compartment with correct polarity. Close the battery compartment.

AspecifiedDC4.5Vadaptor(optional)canbealsousedasapowersupplyforthetransmitter. For use, please connect the adaptor to the power socket (9) on rear of transmitter.

BA

Connecting to the device

The audio cable comes as two parts (Combined length = 155cm) 3.5mm stereo Jack to 2 x RCA Phono Audio Cable (male)

3.5mm stereo jack to 2 x RCA Phono Sockets (female)

Before connecting the transmitter with your electronic device please check what type of Audio-out ports you have on your device.

General types of Audio Out ports:

Single Audio Out port along with the headphone symbolFirst join 2 x RCA Audio Cable (male parts) with 2 x RCA Sockets (female parts) together so they become one joined cable (Fig 3). Plug one end of audio cable into Audio Out port on your device such as a radio, computer, MP3, TV or any device (Fig 4), and plug the other end into Audio In jack of transmitter (Fig 5).Please ensure all cables are plugged in tight – no gaps.

R and L Audio Out ports Plug 2 x RCA Audio Cable (male) into the ports (Fig 6) and plug the other end of the cable into the jack of transmitter fully. Please note sometimes the ports are marked as AUDIO L/R. This does not mean always they are Audio Out ports. Digital Audio Out (OPTICAL) If your device has only the Digital Audio Out (OPTICAL) port, you would need a Digital to Analog Audio Converter (not supplied). After connecting the converter to your device, you will be able to plug the audio cable into the headphone socket on the converter and connect it with the transmitter.

Fig 1

Fig 2

Fig 3

Fig 5

Fig 4

Fig 6

Wireless Headphone Setup•PlugoneendofaudiocableintotheAudioOutsocketonyourdevicesuchasaradio, computer, MP3, TV or any device, and plug the other end into audio in jack of Transmitter fully. (See “General types of Audio Out ports” section)

•Toachievethebestreception,ensuretheTransmitterispositionedhigh.Notethatthe cable is also an antenna, so let it lie spread out, not coiled or jumbled up.•SwitchontheTransmitterbypushingtheswitchto“ON”positionandtheindicatorwill light up. •SwitchontheHeadphonesbymovingthevolumedialuntilitclickspastthe“ON”position and the indicator lights up.•Youshouldbeabletohearthesoundfromheadphonein2-3seconds.Adjustthevolumebyturningtheon/offdialonthesideoftheheadphone.Youcanalsoadjustthe sound volume directly from your connected device. •If you do not hear anything within 2-3 seconds, press “Reset” then “Scan”. This should re-initiate the headphones picking up the signal from the transmitter.

Please note:Once the wireless headphones start working, you should hear the sound through the headphonesONLY. Youshouldnothearanysoundfromtheconnecteddevice,egTV.There are some TVs that allow the sound to be heard BOTH through the headphones AND the TV. If you don’t want to hear both, just mute the sound of your TV.

Wired HeadphoneThe headphones can also be used as wired headphones, avoiding the need to use with batteries. Insert one of the audio cables into the audio jack of the headphones (Fig 4), and the other end into the audio out jack of device (such as computer, CD/VCD/DVD/Mp3 Player etc), then you can enjoy the music from audio sources.Listen to FM broadcastingThe headphones can be used separately as an FM radio. Turn on the headphones. Press “RESET” and then “SCAN” button to select the radio station or auto search.Product Overview Package Includes: 1 x Transmitter 2 x Audio Cables 1 x Headphones 1 x User Manual

Fig 2

Fig 3

Fig 1

Fig 4