De Arend - L'aigle Patentee type sous licence Robert Stephenson and
Company Mise en service 1839 Retrait de service 1856 - 1857 Type 2
2 2 Ecartement 1945 mm Poids 12 tonnes (19.3 tons) Diametre roues
motrices 1810 mm (1800 mm) Diametre roues 1140 mm (1100 mm)
Diametre roues de tender 1060 mm (1060 mm) Longueur hors tout 9785
mm Hauteur 4600 mm Vitesse maximale 30 km / h
Surface foyer 5.9 m 2
Tubes fumées 42.3 m 2
Surface de grille 1.13 m 2
Pression maximale 4.2 kg / cm 2 Nombre de cylindres 2 Alésage x
course 356 x 450 mm
Réserve d'eau chaudière 3,3 m 3 Réserve coke 600 kg Force de
traction. 905 kg
Cette machine roulait sur des voies à grand écartement et donc le
respect de l'échelle sur voie de 45mm va donner une échelle de
réduction de 1/43,22 . Cette échelle est celle des plans de Julius
de Waal. On risque avoir une machine minuscule, comme toutes les
machines de cette époque. De mon point de vue je préfèrerai être
irrespectueux de l'échelle de la voie de façon à avoir une machine
plus facile à construire et un peu plus puissante. Par exemple si
on choisit d'imaginer ces machines roulant sur des voies normales
on passe à une machine au 1/32 ème. Donc un modèle qui aura près de
306mm de long pour 144mm de haut. Sur voie métrique on est au
1/22,2 ème et la machine fera 440 mm de long.
La vitesse maximale à l'échelle sera de 30/22=1,364 km/h. Un train
de réduction par engrenages serait le bienvenu pour une évolution
gracieuse, car bien réglées les machines en 45 mm peuvent atteindre
6 à 8 km/h ce qui rend leur comportement irréaliste et les marches
à vitesse réduite très hasardeuses.
DRAWING NUMBER
JDW DRAUGHTING SERVICES 12 BRIGHTWELL STREET PAPAKURA NEW ZEALAND
TEL/FAX 0064-09-2988815 E-MAIL:
[email protected]
TITLE
A ISSUED FOR CONSTRUCTION A REV
THIS DRAWING REMAINS THE PROPERTY OF JDW DRAUGHTING SERVICES
J.A.M.DE WAAL,12 BRIGHTWELL STREET PAPAKURA 2110 NEW ZEALAND
(09)2988815
SHEET
A3
IF IN DOUBT ASK
REMOVE ALL BURS AND SHARP EDGESIF NOT STATED ALL CHAMFERS AND
FILLETS 0.1mm
DE-AR-45
DO NOT SCALE OF DRAWING
NOTES: ORIGINAL TRACK GAUGE OF THIS ENGINE WAS BROADGAUGE 1945mm
(6'-4 5/8")
STEAM LOCOMOTIVE OF THE HIJSM "DE AREND" 1839 SCALE 1:43 TRACK
GAUGE 45mm GENERAL ARRANGEMENT
PROJECT No: 01-04-10-05-00
135 11885 118 582.4
JDW DRAUGHTING SERVICES 12 BRIGHTWELL STREET PAPAKURA NEW ZEALAND
TEL/FAX 0064-09-2988815 E-MAIL:
[email protected]
TITLE
A ISSUED FOR CONSTRUCTION A REV
THIS DRAWING REMAINS THE PROPERTY OF JDW DRAUGHTING SERVICES
J.A.M.DE WAAL,12 BRIGHTWELL STREET PAPAKURA 2110 NEW ZEALAND
(09)2988815
SHEET
A3
IF IN DOUBT ASK
REMOVE ALL BURS AND SHARP EDGESIF NOT STATED ALL CHAMFERS AND
FILLETS 0.1mm
DE-AR-45
DO NOT SCALE OF DRAWING
NOTES: ORIGINAL TRACK GAUGE OF THIS ENGINE WAS BROADGAUGE 1945mm
(6'-4 5/8")
STEAM LOCOMOTIVE OF THE HIJSM "DE AREND" 1839 SCALE 1:43 TRACK
GAUGE 45mm ISMETRIC VIEWS AND BILL OF MATERIALS
PROJECT No: 01-04-10-05-00
QTY. PART NUMBER 4 DA-CH1-01-WHEEL 2 DA-CH1-02-WHEELAXLE 2
DA-CH1-03-AXLE BOX FRAME 4 DA-CH1-04-AXLE BOX + LEAF SPRING 1
DA-CH1-05-CHASSIS FRAME 1 DA-CH1-06-COACH BODY 1 DA-CH1-07-ROOF 4
DA-CH1-08-BUFFER 1 DA-CH1-RAIL 4 DA-CH2-01-WHEEL 2
DA-CH2-02-WHEELAXLE 2 DA-CH2-03-AXLE BOX FRAME 4 DA-CH2-04-AXLE BOX
+ LEAF SPRING 1 DA-CH2-05-CHASSIS FRAME 1 DA-CH2-06-COACH BODY 1
DA-CH2-07-ROOF 4 DA-CH2-08-BUFFER 1 DA-CH2-RAIL 4 DA-CH3-01-WHEEL 2
DA-CH3-02-WHEELAXLE 2 DA-CH3-03-AXLE BOX FRAME 4 DA-CH3-04-AXLE BOX
+ LEAF SPRING 1 DA-CH3-05-CHASSIS FRAME 1 DA-CH3-06-COACH BODY 1
DA-CH3-07-ROOF 4 DA-CH3-08-BUFFER 1 DA-CH3-RAIL 4
DA-LOC-01-FRONT-REAR WHEEL 2 DA-LOC-02-FRONT-REAR AXLE 2
DA-LOC-03-CENTRE WHEEL 1 DA-LOC-04-CRANK AXLE 1 DA-LOC-05-SIDE
FRAME 1 DA-LOC-05-SIDE FRAME 1 DA-LOC-06-FRONT BUFFER PLATE 8
DA-LOC-07-AXLE BOX SHEEN PLATE-1 4 DA-LOC-08-AXLE BOX SHEEN PLATE-2
1 DA-LOC-09-REAR PLATE 2 DA-LOC-10-STAY-TYPE-1 2
DA-LOC-11-STAY-TYPE-2 2 DA-LOC-12-STAY-TYPE-3 2
DA-LOC-13-STAY-TYPE-4 8 DA-LOC-14-LEAF SPRING LINK 4 DA-LOC-15-AXLE
BLOCK RETAINER 6 DA-LOC-16A-AXLE BLOCK 4 DA-LOC-16B-FRONT-REAR
LEAFSPRING 2 DA-LOC-17-CENTRELEAFSPRING 4 DA-LOC-18-CENTRE LEAF
SPRING LINK 1 DA-LOC-19-FOOT PLATE 4 DA-LOC-20-DRIVER PROTECTION
SIDE PLATE 2 DA-LOC-21-DRIVER PROTECTION COVER PLATE 1
DA-LOC-22-SMOKE BOX 1 DA-LOC-23-SMOKE BOX FRONT COVER 1
DA-LOC-24-SMOKE BOX REAR COVER 1 DA-LOC-25-SMOKE STACK 1
DA-LOC-26-FIRE BOX
QTY. PART NUMBER 1 DA-LOC-27-FIRE BOX FRONT COVER 1 DA-LOC-28-FIRE
BOX REAR COVER 1 DA-LOC-29-FIRE BOX DOME 1 DA-LOC-30-BOILER 1
DA-LOC-31-BOILER STEAM DOME 2 DA-LOC-32-BOILER STEAM VALVE 2
DA-LOC-33-SMOKE BOX BRACKET 2 DA-LOC-34-FIRE BOX BRACKET 2
DA-LOC-35-RAILING 2 DA-LOC-36-PISTON + ROD 2 DA-LOC-37-CON ROD 1
DA-LOC-RAIL 4 DA-TEN-01-WHEEL 2 DA-TEN-02-WHEELAXLE 1
DA-TEN-03-SIDE FRAME 1 DA-TEN-04-SIDE FRAME 4 DA-TEN-05-AXLE BOX
SHEEN PLATE 4 DA-TEN-06-AXLE BLOCK 2 DA-TEN-07-STAY-TYPE-1 4
DA-TEN-08-AXLE BOX RETAINER 1 DA-TEN-09-FOOT PLATE 1
DA-TEN-10-WATER TANK 8 DA-TEN-11-LEAF SPRING LINK 4
DA-TEN-12-TENDER LEAFSPRING 2 DA-TEN-13-TENDER BUFFER 1
DA-TEN-RAIL
2 of 13
JDW DRAUGHTING SERVICES 12 BRIGHTWELL STREET PAPAKURA NEW ZEALAND
TEL/FAX 0064-09-2988815 E-MAIL:
[email protected]
TITLE
A ISSUED FOR CONSTRUCTION A REV
THIS DRAWING REMAINS THE PROPERTY OF JDW DRAUGHTING SERVICES
J.A.M.DE WAAL,12 BRIGHTWELL STREET PAPAKURA 2110 NEW ZEALAND
(09)2988815
SHEET
A3
IF IN DOUBT ASK
REMOVE ALL BURS AND SHARP EDGESIF NOT STATED ALL CHAMFERS AND
FILLETS 0.1mm
DE-AR-45
DO NOT SCALE OF DRAWING
NOTES: ORIGINAL TRACK GAUGE OF THIS ENGINE WAS BROADGAUGE 1945mm
(6'-4 5/8")
STEAM LOCOMOTIVE OF THE HIJSM "DE AREND" 1839 SCALE 1:43 TRACK
GAUGE 45mm LOCOMOTIVE PARTS
PROJECT No: 01-04-10-05-00
1 1 1 1
1
1.5
2 3.5 13.5 3.5 11 3.5 22 4.5 11 4.5 24.5 3.5 11 3.5 3 3.5 130
2. 5
44.5 1
JDW DRAUGHTING SERVICES 12 BRIGHTWELL STREET PAPAKURA NEW ZEALAND
TEL/FAX 0064-09-2988815 E-MAIL:
[email protected]
TITLE
A ISSUED FOR CONSTRUCTION A REV
THIS DRAWING REMAINS THE PROPERTY OF JDW DRAUGHTING SERVICES
J.A.M.DE WAAL,12 BRIGHTWELL STREET PAPAKURA 2110 NEW ZEALAND
(09)2988815
SHEET
A3
IF IN DOUBT ASK
REMOVE ALL BURS AND SHARP EDGESIF NOT STATED ALL CHAMFERS AND
FILLETS 0.1mm
DE-AR-45
DO NOT SCALE OF DRAWING
NOTES: ORIGINAL TRACK GAUGE OF THIS ENGINE WAS BROADGAUGE 1945mm
(6'-4 5/8")
STEAM LOCOMOTIVE OF THE HIJSM "DE AREND" 1839 SCALE 1:43 TRACK
GAUGE 45mm LOCOMOTIVE PARTS
PROJECT No: 01-04-10-05-00
11
24
9
0.5
R25 0.5mm
R30 0.5mm
23 21.5 23
JDW DRAUGHTING SERVICES 12 BRIGHTWELL STREET PAPAKURA NEW ZEALAND
TEL/FAX 0064-09-2988815 E-MAIL:
[email protected]
TITLE
A ISSUED FOR CONSTRUCTION A REV
THIS DRAWING REMAINS THE PROPERTY OF JDW DRAUGHTING SERVICES
J.A.M.DE WAAL,12 BRIGHTWELL STREET PAPAKURA 2110 NEW ZEALAND
(09)2988815
SHEET
A3
IF IN DOUBT ASK
REMOVE ALL BURS AND SHARP EDGESIF NOT STATED ALL CHAMFERS AND
FILLETS 0.1mm
DE-AR-45
DO NOT SCALE OF DRAWING
NOTES: ORIGINAL TRACK GAUGE OF THIS ENGINE WAS BROADGAUGE 1945mm
(6'-4 5/8")
STEAM LOCOMOTIVE OF THE HIJSM "DE AREND" 1839 SCALE 1:43 TRACK
GAUGE 45mm LOCOMOTIVE PARTS
PROJECT No: 01-04-10-05-00
27
JDW DRAUGHTING SERVICES 12 BRIGHTWELL STREET PAPAKURA NEW ZEALAND
TEL/FAX 0064-09-2988815 E-MAIL:
[email protected]
TITLE
A ISSUED FOR CONSTRUCTION A REV
THIS DRAWING REMAINS THE PROPERTY OF JDW DRAUGHTING SERVICES
J.A.M.DE WAAL,12 BRIGHTWELL STREET PAPAKURA 2110 NEW ZEALAND
(09)2988815
SHEET
A3
IF IN DOUBT ASK
REMOVE ALL BURS AND SHARP EDGESIF NOT STATED ALL CHAMFERS AND
FILLETS 0.1mm
DE-AR-45
DO NOT SCALE OF DRAWING
NOTES: ORIGINAL TRACK GAUGE OF THIS ENGINE WAS BROADGAUGE 1945mm
(6'-4 5/8")
STEAM LOCOMOTIVE OF THE HIJSM "DE AREND" 1839 SCALE 1:43 TRACK
GAUGE 45mm LOCOMOTIVE PARTS AND ASSEMBLIES
PROJECT No: 01-04-10-05-00
20. 5 1
10.5
2.4
1
1
222 22 22 22 18 4 4 4 4 4 4 R0.5
16 .5
JDW DRAUGHTING SERVICES 12 BRIGHTWELL STREET PAPAKURA NEW ZEALAND
TEL/FAX 0064-09-2988815 E-MAIL:
[email protected]
TITLE
A ISSUED FOR CONSTRUCTION A REV
THIS DRAWING REMAINS THE PROPERTY OF JDW DRAUGHTING SERVICES
J.A.M.DE WAAL,12 BRIGHTWELL STREET PAPAKURA 2110 NEW ZEALAND
(09)2988815
SHEET
A3
IF IN DOUBT ASK
REMOVE ALL BURS AND SHARP EDGESIF NOT STATED ALL CHAMFERS AND
FILLETS 0.1mm
DE-AR-45
DO NOT SCALE OF DRAWING
NOTES: ORIGINAL TRACK GAUGE OF THIS ENGINE WAS BROADGAUGE 1945mm
(6'-4 5/8")
STEAM LOCOMOTIVE OF THE HIJSM "DE AREND" 1839 SCALE 1:43 TRACK
GAUGE 45mm LOCOMOTIVE ASSEMBLIES AND BOM
PROJECT No: 01-04-10-05-00
QTY. PART NUMBER 4 DA-LOC-01-FRONT-REAR WHEEL 2
DA-LOC-02-FRONT-REAR AXLE 2 DA-LOC-03-CENTRE WHEEL 1
DA-LOC-04-CRANK AXLE 1 DA-LOC-05-SIDE FRAME 1 DA-LOC-05-SIDE FRAME
1 DA-LOC-06-FRONT BUFFER PLATE 8 DA-LOC-07-AXLE BOX SHEEN PLATE-1 4
DA-LOC-08-AXLE BOX SHEEN PLATE-2 1 DA-LOC-09-REAR PLATE 2
DA-LOC-10-STAY-TYPE-1 2 DA-LOC-11-STAY-TYPE-2 2
DA-LOC-12-STAY-TYPE-3 2 DA-LOC-13-STAY-TYPE-4 8 DA-LOC-14-LEAF
SPRING LINK 4 DA-LOC-15-AXLE BLOCK RETAINER 6 DA-LOC-16A-AXLE BLOCK
4 DA-LOC-16B-FRONT-REAR LEAFSPRING 2 DA-LOC-17-CENTRELEAFSPRING 4
DA-LOC-18-CENTRE LEAF SPRING LINK 1 DA-LOC-19-FOOT PLATE 4
DA-LOC-20-DRIVER PROTECTION SIDE PLATE 2 DA-LOC-21-DRIVER
PROTECTION COVER PLATE 1 DA-LOC-22-SMOKE BOX 1 DA-LOC-23-SMOKE BOX
FRONT COVER 1 DA-LOC-24-SMOKE BOX REAR COVER 1 DA-LOC-25-SMOKE
STACK 1 DA-LOC-26-FIRE BOX 1 DA-LOC-27-FIRE BOX FRONT COVER 1
DA-LOC-28-FIRE BOX REAR COVER 1 DA-LOC-29-FIRE BOX DOME 1
DA-LOC-30-BOILER 1 DA-LOC-31-BOILER STEAM DOME 2 DA-LOC-32-BOILER
STEAM VALVE 2 DA-LOC-33-SMOKE BOX BRACKET 2 DA-LOC-34-FIRE BOX
BRACKET 2 DA-LOC-35-RAILING 2 DA-LOC-36-PISTON + ROD 2
DA-LOC-37-CON ROD
7 of 13
JDW DRAUGHTING SERVICES 12 BRIGHTWELL STREET PAPAKURA NEW ZEALAND
TEL/FAX 0064-09-2988815 E-MAIL:
[email protected]
TITLE
A ISSUED FOR CONSTRUCTION A REV
THIS DRAWING REMAINS THE PROPERTY OF JDW DRAUGHTING SERVICES
J.A.M.DE WAAL,12 BRIGHTWELL STREET PAPAKURA 2110 NEW ZEALAND
(09)2988815
SHEET
A3
IF IN DOUBT ASK
REMOVE ALL BURS AND SHARP EDGESIF NOT STATED ALL CHAMFERS AND
FILLETS 0.1mm
DE-AR-45
DO NOT SCALE OF DRAWING
NOTES: ORIGINAL TRACK GAUGE OF THIS ENGINE WAS BROADGAUGE 1945mm
(6'-4 5/8")
STEAM LOCOMOTIVE OF THE HIJSM "DE AREND" 1839 SCALE 1:43 TRACK
GAUGE 45mm TENDER PARTS
PROJECT No: 01-04-10-05-00
26 24.5
1 21
FOR OTHER DIMENSIONS DETAILS REFER TO PART O1 ON SHT 3
01
21
FOR ALL DIMENSIONS DETAILS REFER TO PART O2 ON SHT 3
02
24
1 2
SCALE 1:1
3 3
05 06
FOR ALL DIMENSIONS DETAILS REFER TO PART 16A ON SHT 4
2907
5
JDW DRAUGHTING SERVICES 12 BRIGHTWELL STREET PAPAKURA NEW ZEALAND
TEL/FAX 0064-09-2988815 E-MAIL:
[email protected]
TITLE
A ISSUED FOR CONSTRUCTION A REV
THIS DRAWING REMAINS THE PROPERTY OF JDW DRAUGHTING SERVICES
J.A.M.DE WAAL,12 BRIGHTWELL STREET PAPAKURA 2110 NEW ZEALAND
(09)2988815
SHEET
A3
IF IN DOUBT ASK
REMOVE ALL BURS AND SHARP EDGESIF NOT STATED ALL CHAMFERS AND
FILLETS 0.1mm
DE-AR-45
DO NOT SCALE OF DRAWING
NOTES: ORIGINAL TRACK GAUGE OF THIS ENGINE WAS BROADGAUGE 1945mm
(6'-4 5/8")
STEAM LOCOMOTIVE OF THE HIJSM "DE AREND" 1839 SCALE 1:43 TRACK
GAUGE 45mm TENDER PARTS, ASSEMBLIES & BOM
PROJECT No: 01-04-10-05-00
QTY. PART NUMBER 4 DA-TEN-01-WHEEL 2 DA-TEN-02-WHEELAXLE 1
DA-TEN-03-SIDE FRAME 1 DA-TEN-04-SIDE FRAME 4 DA-TEN-05-AXLE BOX
SHEEN PLATE 4 DA-TEN-06-AXLE BLOCK 2 DA-TEN-07-STAY-TYPE-1 4
DA-TEN-08-AXLE BOX RETAINER 1 DA-TEN-09-FOOT PLATE 1
DA-TEN-10-WATER TANK 8 DA-TEN-11-LEAF SPRING LINK 4
DA-TEN-12-TENDER LEAFSPRING 2 DA-TEN-13-TENDER BUFFER
9 of 13
JDW DRAUGHTING SERVICES 12 BRIGHTWELL STREET PAPAKURA NEW ZEALAND
TEL/FAX 0064-09-2988815 E-MAIL:
[email protected]
TITLE
A ISSUED FOR CONSTRUCTION A REV
THIS DRAWING REMAINS THE PROPERTY OF JDW DRAUGHTING SERVICES
J.A.M.DE WAAL,12 BRIGHTWELL STREET PAPAKURA 2110 NEW ZEALAND
(09)2988815
SHEET
A3
IF IN DOUBT ASK
REMOVE ALL BURS AND SHARP EDGESIF NOT STATED ALL CHAMFERS AND
FILLETS 0.1mm
DE-AR-45
DO NOT SCALE OF DRAWING
NOTES: ORIGINAL TRACK GAUGE OF THIS ENGINE WAS BROADGAUGE 1945mm
(6'-4 5/8")
STEAM LOCOMOTIVE OF THE HIJSM "DE AREND" 1839 SCALE 1:43 TRACK
GAUGE 45mm COACH-1 PARTS
PROJECT No: 01-04-10-05-00
10°
15
02
2
2
12
20 20
0. 40. 40.
JDW DRAUGHTING SERVICES 12 BRIGHTWELL STREET PAPAKURA NEW ZEALAND
TEL/FAX 0064-09-2988815 E-MAIL:
[email protected]
TITLE
A ISSUED FOR CONSTRUCTION A REV
THIS DRAWING REMAINS THE PROPERTY OF JDW DRAUGHTING SERVICES
J.A.M.DE WAAL,12 BRIGHTWELL STREET PAPAKURA 2110 NEW ZEALAND
(09)2988815
SHEET
A3
IF IN DOUBT ASK
REMOVE ALL BURS AND SHARP EDGESIF NOT STATED ALL CHAMFERS AND
FILLETS 0.1mm
DE-AR-45
DO NOT SCALE OF DRAWING
NOTES: ORIGINAL TRACK GAUGE OF THIS ENGINE WAS BROADGAUGE 1945mm
(6'-4 5/8")
STEAM LOCOMOTIVE OF THE HIJSM "DE AREND" 1839 SCALE 1:43 TRACK
GAUGE 45mm COACH-1 PARTS, ASSEMBLIES AND BOM
PROJECT No: 01-04-10-05-00
QTY. PART NUMBER 4 DA-CH1-01-WHEEL 2 DA-CH1-02-WHEELAXLE 2
DA-CH1-03-AXLE BOX FRAME 4 DA-CH1-04-AXLE BOX + LEAF SPRING 1
DA-CH1-05-CHASSIS FRAME 1 DA-CH1-06-COACH BODY 1 DA-CH1-07-ROOF 4
DA-CH1-08-BUFFER
11 of 13
JDW DRAUGHTING SERVICES 12 BRIGHTWELL STREET PAPAKURA NEW ZEALAND
TEL/FAX 0064-09-2988815 E-MAIL:
[email protected]
TITLE
A ISSUED FOR CONSTRUCTION A REV
THIS DRAWING REMAINS THE PROPERTY OF JDW DRAUGHTING SERVICES
J.A.M.DE WAAL,12 BRIGHTWELL STREET PAPAKURA 2110 NEW ZEALAND
(09)2988815
SHEET
A3
IF IN DOUBT ASK
REMOVE ALL BURS AND SHARP EDGESIF NOT STATED ALL CHAMFERS AND
FILLETS 0.1mm
DE-AR-45
DO NOT SCALE OF DRAWING
NOTES: ORIGINAL TRACK GAUGE OF THIS ENGINE WAS BROADGAUGE 1945mm
(6'-4 5/8")
STEAM LOCOMOTIVE OF THE HIJSM "DE AREND" 1839 SCALE 1:43 TRACK
GAUGE 45mm COACH-2 PARTS, ASSEMLIES AND BOM
PROJECT No: 01-04-10-05-00
3 17
2 7
2 7
06
QTY. PART NUMBER COMMENTS 4 DA-CH2-01-WHEEL REFER TO SHEET 10 2
DA-CH2-02-WHEELAXLE REFER TO SHEET 10 2 DA-CH2-03-AXLE BOX FRAME
REFER TO SHEET 10 4 DA-CH2-04-AXLE BOX + LEAF SPRING REFER TO SHEET
10 1 DA-CH2-05-CHASSIS FRAME REFER TO SHEET 10 1 DA-CH2-06-COACH
BODY 1 DA-CH2-07-ROOF 4 DA-CH2-08-BUFFER REFER TO SHEET 11
12 of 13
JDW DRAUGHTING SERVICES 12 BRIGHTWELL STREET PAPAKURA NEW ZEALAND
TEL/FAX 0064-09-2988815 E-MAIL:
[email protected]
TITLE
A ISSUED FOR CONSTRUCTION A REV
THIS DRAWING REMAINS THE PROPERTY OF JDW DRAUGHTING SERVICES
J.A.M.DE WAAL,12 BRIGHTWELL STREET PAPAKURA 2110 NEW ZEALAND
(09)2988815
SHEET
A3
IF IN DOUBT ASK
REMOVE ALL BURS AND SHARP EDGESIF NOT STATED ALL CHAMFERS AND
FILLETS 0.1mm
DE-AR-45
DO NOT SCALE OF DRAWING
NOTES: ORIGINAL TRACK GAUGE OF THIS ENGINE WAS BROADGAUGE 1945mm
(6'-4 5/8")
STEAM LOCOMOTIVE OF THE HIJSM "DE AREND" 1839 SCALE 1:43 TRACK
GAUGE 45mm COACH-3 PARTS, ASSEMLIES AND BOM
PROJECT No: 01-04-10-05-00
3 17 CUT OUT CUT OUT CUT OUT
SCALE 1:1 FOR ALL OTHER DIMENSIONS REFER TO PART 06 ON SHEET
12
QTY. PART NUMBER COMMENTS 4 DA-CH3-01-WHEEL REFER TO SHEET 10 2
DA-CH3-02-WHEELAXLE REFER TO SHEET 10 2 DA-CH3-03-AXLE BOX FRAME
REFER TO SHEET 10 4 DA-CH3-04-AXLE BOX + LEAF SPRING REFER TO SHEET
10 1 DA-CH3-05-CHASSIS FRAME REFER TO SHEET 10 1 DA-CH3-06-COACH
BODY 1 DA-CH3-07-ROOF REFER TO SHEET 12 4 DA-CH3-08-BUFFER REFER TO
SHEET 11
13 of 13
Drawing View14
Drawing View15
Drawing View17
Drawing View18
Drawing View19
Drawing View20
Drawing View21
Drawing View22
Drawing View23
Drawing View25
Drawing View27
Drawing View28
Drawing View29
Drawing View30
Drawing View34
Drawing View35
Drawing View36
Drawing View37
Drawing View38
X
