Ne

CREST OIL AND GAS Ultrasonic Cleaning System For Cleaning

Heat Exchanger

Cavita on Thickness Mode Perspec ve View of Cleaning Bubble Transducers Tank with Transducers Installed Ultrasonic cleaning par cularly with thickness mode ultrasonic transducers provides a much more efficient way to clean heat exchangers. Sound wave implosions, called cavita on that separates the contaminant from the surface without damaging a component.

BEFORE 4 1/2 HOURS

  

The proper performance of shell and tube type heat exchangers within a process can affect the cost of the final product, or even the product, produc on rate. Unfortunately, heat exchangers are prone to fouling, its nature depending on the fluids flowing within and over the tubes: and the reduc on in heat transfer that results almost invariably has an impact on product cost. To reduce this impact, heat exchanger performance should be intelligently monitored and the heat exchanger cleaned at intervals that are determined from op mal economic criteria. Further, the cleaning method selected should be one that is not only able to handle effec vely the type of fouling Experienced with that heat exchanger, but also results in minimum annual maintenance 

Effectively removes all forms of hydrocarbon contamination and refinery-grade by-products compared to conventional cleaning processes.

Able to clean components and equipment once deemed not cleanable. Cleaning process can be done in a fraction of the time required by conventional

methods. Conventional high pressure cleaning can use in excess of 20,000 gallons of water

per exchanger and requires waste water treatment. The waste produced by ultrasonic cleaning is contained in a tank and changed out only every few months, a very environmental friendly approach. Water usage in ultrasonic cleaning is greatly reduced. Ultrasonic cleaning reduces safety concern compared to high pressure cleaning

CREST OIL AND GAS  Is pleased to announce that we have a new process for cleaning heat exchangers using Thickness Mode Ultrasonic Transducers.  Cumula ve effect of millions of con nuous ny implosions In a liquid medium, provides the necessary mechanical energy to break up the bonded contaminants. For more informa on please call Crest Oil & Gas: 860‐614‐8845 

Page 2 CREST OIL AND GAS

ULTRASONIC

CLEANING

TANK

BEING

DELIVERED

ELECTRICAL

CONTROL

CONTAINER

Left Side

ELECTRICAL

CONTROL

CONTAINER

Right Side

ULTRASONIC

CLEANING

TANK

SHOWING

PATIENT

PENDING

PUSH-PULL

TRANSDUCERS

Page 3

CLEANDED

IN

4 1/2 Hrs.

ULTRASONIC

CLEANING

TANK

WITH

SCAFOLDING

Scotch Road Trenton, New Jersey 08628

Phone: 609-883-4000 Fax: 609-883-6760

E-mail: wrobertson@crest-ultrasonics.com

WELCOME TO CREST OIL AND GAS

If you are serious about quality, innovation and value in your ultrasonic cleaning needs, Crest Oil and Gas has the solution..

There is one name in Ultrasonic Cleaning Equipment that is synonymous with innovation. Crest has been leading the way since 1961 in the development, installation and support of high quality Ultrasonic Cleaning Systems, Components and Chemistries. Our reputation as an industry leader is the result of year after year of technologic breakthroughs that enhance our industrial cleaning equipment.

Our development and process engineers have the knowledge and experience to meet the demand for a Safer, Faster, Greener, More Efficient way to clean heat exchangers, pumps, valves scaffolding and related parts.

Being cognizant of the environment, Crest Oil and Gas uses water base detergents that were designed to cavitate with our ultrasonic cleaning systems. Our deter-gents are free from any harmful chemicals, and they don’t require specialized waste disposal. The amount of water used in our ultrasonic cleaning process is greatly reduced compared to conventional high pressure cleaning technologies.

Crest Oil and Gas takes pride in it’s product and is always will to listen to our customers needs and recommendations so that we can deliver the best cleaning process possible.

CREST OIL AND GAS

Business Tagline or Motto

When Clean Matters

CREST

LEADS

THE

WAY

AGAIN

Call for more Information

860-614-8845

A DOMINATING INDUSTRY PRESENCE WITH PATENTED ULTRASONIC

INNOVATIONS, VERTICAL INTEGRATION, AND WORLDWIDE SECTOR DIVERSITY