Embed Size (px)
Citation preview
1
CONTEXTUAL LEARNING MATRIX
QUALIFICATION TITLE: COMPUTER HARDWARE SERVICING NC II
UNIT OF COMPETENCY: APPLY QUALITY STANDARD (COMMON)
MODULE TITLE: APPLYING QUALITY STANDARD
LEARNING OUTCOMES
ASSESSMENT
CRITERIA
LEARNING CONCEPTS LEARNING COMPETENCIES LEARNING ACTIVITIES
GUIDE QUESTIONS
TECHNOLOGY
SCIENCE
MATH
ENG/COMM
LO 1. Assess quality of received equipment
1.1 Work instruction is obtained and work is carried out in accordance with standard operating procedures.
Obtaining work installation and carry out of work in accordance with the standard procedure
Y1- Discuss the importance of scientific values in decision making and problem-solving in daily life.
Y2 - Given the systems of linear equation in two variables, find the solution by elimination or substitution.
TECHNOLOGY Discuss the instructions based on standard operating procedures. SCIENCE Conduct a research study on the process and significance of product development and quality assurance of any-related field (i.e. food testing by BFAD) MATH Using a cooperative learning as strategy, solve systems of equations and justify their answer orally based on the method used.
TECHNOLOGY What are things that we need for in choosing quality materials? SCIENCE Why should we follow the SOP in doing computer related tasks and what are the consequences of not follow the SOP. MATH How is your knowledge on following standard operating procedures guide you in solving systems of equations?
1.2 Received materials are checked based workplace standards and specifications.
Checking of received materials based on work standards and specification
Y1- Apply the scientific method in conducting a simple scientific investigation. Design a
Y1- Perform the four fundamental operations on integers (MDAS).
Y4- Carry out instructions given.
ENGLISH Carry out instructions given. MATH Answer the given set of problems applying the four fundamental
ENGLISH Why is assessment of received equipment important? MATH Does your knowledge in performing the four
2
procedure to test the hypothesis
operations. SCIENCE Hands-on-activity/experiment on different electronic components.
fundamental operations guide you in identifying and checking the specifications of the received materials? SCIENCE What is the importance of having design or procedures in the activity?
1.3 Faulty materials related to work are identified and isolated.
Listing of detective materials in accordance with the standard operating procedure.
Y1- Perform laboratory work following cautiously the warning signs in the use of chemicals and devices.
Y2- Solve rational algebraic equations and check for extraneous solutions.
Y2- Sequencing events using transitional device (e.g) first, secondly, thirdly or lastly.
TECHNOLOGY Conduct simulation of actual assessment of received equipment. MATH
After solving for the correct values obtained in the given algebraic equations, write a journal why some of the values obtained are not solutions. SCIENCE Conduct laboratory experiment about the functionality of electronic components.
ENGLISH What are the criteria in identifying faulty materials? MATH What is it important to identifying the errors in solving rational algebraic equations? SCIENCE Why is it important to test the materials before using it?
1.4 Faults and any identified causes are recorded and/or reported to the concerned person in-authority in accordance with the workplace procedures.
Reporting of defective materials.
Y1- Apply the scientific method in:
Identify limitations and make recommendations for further study
Y1- Giving and responding to feedbacks
ENGLISH Giving personal response to feedbacks by using grammatical structure and vocabulary to assess condition of received equipment.
ENGLISH What are the common reactions if you purchase faulty materials?
3
SCIENCE Make a laboratory report on the identified problems in the activity and make possible recommendations.
1.5 Faulty materials are replaced in accordance with workplace standard operating procedures (SOP).
Replacing of faulty materials
TECHNOLOGY Conduct a simulation base on the actual parts replacement
LO 2 Assess own work
2.1 Work performance is documented in accordance with workplace procedures.
Reporting defects detected in accordance with standard operating procedures.
Y1- Organizing qualitative and quantitative data in the form of charts, tables and graphs.
Y3- Developing writing skills for documentation, particularly descriptive paragraph
ENGLISH Write a description of the student’s performance in comparison with workplace standards. SCIENCE Conduct activity/experiment and present the gathered data in the form of chart or graph.
ENGLISH What are the positive and negative consequence of making an assessment of his/her own performance. SCIENCE What is the importance of charts, graph and gathered data in presenting laboratory tasks?
2.2 Completed work is checked against workplace standards.
Carrying out work in accordance with the process improvement.
Y1- Comparing data to look for patterns and trends
Y1 & Y2- Assessing own work.
ENGLISH Using checklist/rubrics to assess own work performance.
ENGLISH How do you assess your own work?
2.3 Errors are identified and corrected
Using different troubleshooting techniques
Y1-Y4- Organizing data and indicating sources of errors.
Y2- Solve rational algebraic equations and check for extraneous solutions.
SCIENCE Conduct simple experiment and compute the amount of errors of experimental value. MATH After solving for the correct values obtained
SCIENCE What are the sources of errors in conducting an actual in experiment? (Different types of errors) MATH What are the importance in
4
in the given rational algebraic equations, write a journal why some of the values obtained are not solutions.
identifying the errors in solving rational algebraic equations and be corrected?
2.4 In case of deviations from specific quality standards causes are documented and reported in accordance with the workplace’s standard operating procedures.
Documenting and reporting of the cause of errors
YI- Apply the scientific method in:
Make generalization/conclusions
SCIENCE Make a laboratory write-up including inferring and drawing conclusion from the gathered data.
SCIENCE Infer the sets of data and explain the modifications out of identified errors in the results of experiment.
LO 3. Validate one’s work for quality improvement
3.1 Work is carried out in accordance with process improvement procedures.
Carry out of work in accordance with the process improvement procedure
TECHNOLOGY Learner rates his performance through a checklist based on process improvement procedure/standard
TECHNOLOGY Why should one evaluate his/her performance?
5
3.2 Performance of operation or quality of service is monitored to ensure customer satisfaction.
Monitoring of performance operations or quality of service
Y1-Y4- Applying science and technology to community needs, resources and goals to improve the quality of life.
Y1- Simplify radical expressions using PEMDAS
Y3- Developing /Validating the learner’s performance.
ENGLISH Use rubrics to validate one’s work. SCIENCE Interview a customer on the quality of service received. MATH Solve problem involving radical expressions.
ENGLISH What are the tools/instruments used to validate one’s work? MATH What is the importance of following procedures in solving problems involving radicals? SCIENCE What is the importance of involving the community/customer in knowing the quality of one’s work or service?
6
QUALIFICATION TITLE: COMPUTER HARDWARE SERVICING NC II
UNIT OF COMPETENCY: USE HAND TOOLS
MODULE TITLE: USING HAND TOOLS
LEARNING OUTCOMES
ASSESSMENT
CRITERIA
LEARNING CONCEPTS/CONTENT LEARNING ACTIVITIES
GUIDE QUESTIONS
TECHNOLOGY
SCIENCE
MATH
ENG/COMM
LO 1. Plan and prepare for task to be undertaken
1.1 Tasks to be undertaken are identified accordingly.
Using hand tools for adjusting, dismantling, assembling, finishing, cutting
Y-2 Know the tools used in the development of biotechnology
Identify the parts and the functions
Y-1 Classify tools and tasks in a chart using the present form of the verb in classifying tools and tasks.
TECHNOLOGY Classifying tools Classify tools and tasks in a chart SCIENCE Conducting an activity Conduct simple laboratory activity using tools/simple machines. ENGLISH Constructing sentences Use the present form of the verb in classifying tools, tasks in a chart.
TECHNOLOGY What are the different types of hand tools used in specific tasks? ENGLISH What is the importance of classifying tools? SCIENCE How will you identify the functions of different tools?
1.2 Appropriate hand tools are identified according to the task requirements.
Planning tasks in all situations and reviewed tasks requirements as appropriate
Y-2 Know the tools used in the development:
Name the special tools used in research and technology
Y-2 Developing vocabulary(hand tools for computer hardware)
ENGLISH Unlocking of vocabulary Unlock vocabulary difficulties for familiarity in using hand tools for computer hardware. SCIENCE Identifying tools and equipment Laboratory Group Exploration (Activity on
ENGLISH Does the familiarity with tools help you recognize the importance of their functions? SCIENCE How important is knowing the different tools and their uses in experiment?
7
naming and identifying tools and equipment in laboratory experiment)
1.3 Selection of tools in accordance with the task requirements.
Using the proper tools in accordance to quality standards
Y-2 Identify relationship in real life that are direct, direct square, inverse and joint variations.
MATH Problem solving Answer the given problems involving different types of variations. Write a journal on the type of variation fitted for you and explain the reason why you chose it.
MATH Why is there a need to relate variation in the selection of tools?
LO 2. Prepare hand tools
2.1 Appropriate hand tools are checked for proper operation and safety.
Identifying of the appropriate hand tools
Y-2,3,4 Knowing the tools used in science research and investigation and identify the function of each.
Y-1 Use illustration to activate background knowledge of what is discuss in the text.
TECHNOLOGY & ENGLISH Characterize the list of hand tools used. SCIENCE Visit a science laboratory room and study the different tools/apparatus
TECHNOLOGY How do you prepare hand tools for computer hardware servicing? ENGLISH Why is there a need for checking appropriate hand tools? SCIENCE In visiting the laboratory room, what are the identified tools and their functions?
2.2 Unsafe or faulty tools are identified and marked for repair according to standard operating
Identifying and separating unsafe or faulty tools
TECHNOLOGY Classify safe or unsafe hand tools.
TECHNOLOGY What are the steps in identifying unsafe or faulty tools?
8
procedures.
LO 3. Use appropriate hand tools and test equipment
3.1 Tools are used according to tasks undertaken.
Using gloves, goggles, apron as personal protective equipment.
Y-1 Demonstrate safe ways of using the apparatus/equipment in the laboratory
Use laboratory apparatus appropriately
Y-2 Identify the uses of hand tools and test equipment
TECHNOLOGY Conduct simulation of using appropriate hand tools and test equipment SCIENCE Hands-on-Activity on the use of science tools and equipment
ENGLISH What are the safety procedures in using tools and test equipment? SCIENCE How are the tools/equipment properly used in the experiment?
3.2 All safety procedures in using tools are observed at all times and appropriate personal protective equipment (PPE) are used.
Performing safety procedures at all times.
Y-2 Find the solution set of a quadratic equation.
Y-3 Give and respond to feedback on written output. What is the importance of using a pattern in solving a problem?
MATH Solve quadratic equation using one method. Write a journal on the importance of following/observing a pattern or method. ENGLISH Write narrative report of any malfunctions, accidental or unusual events reported to supervisor.
ENGLISH What are the appropriate personal protective equipment used? MATH Why is it important in a workplace to consider patterns or methods before solving a quadratic function?
3.3 Malfunction, accidental or unusual events are reported to the teacher/ trainer.
Observing/performing processes or tasks assigned process to ensure safe and efficient working environment
Y-4 Awareness of the level of exposure to EM frequency wave to human.
SCIENCE PowerPoint Presentation on the effects of EM to human body
ENGLISH What are you going to do when accidents or malfunctions occur? SCIENCE What are the different effects of EM wave in the human body? In what ways can the level of exposure to
9
industrial wastes be minimized?
LO 4. Maintain hand tools
4.1 Tools are handled properly to avoid damage.
Cleaning, lubricating, sharpening, tightening, repairing and maintaining hand tools
Y-1 Demonstrate safe ways of using the apparatus:
Practice precautionary measures in the laboratory
Y-2 Write a well-organized paragraph on maintaining hand tools
SCIENCE Conduct a laboratory activity and observe the proper handling of tools/apparatus.. ENGLISH 2 Write a short paragraph on how to use hand tools properly.
TECHNOLOGY Why is routine maintenance of tools important? ENGLISH How valuable/ effective is the routine maintenance of tools? SCIENCE Are chemical reactions of materials important in considering proper handling of tools/equipments?
4.2 Routine maintenance of tools is undertaken according to standard operational procedures, principles, and techniques.
Maintaining hand tools based on the standard operating procedure.
Y-1 Demonstrate safe ways of using the apparatus/equipment in the laboratory..
Use laboratory apparatus appropriately
Y-3 Apply the fundamental law of proportion
Y-4 Deliver a short informative talk on routine maintenance of tools.
TECHNOLOGY Conduct maintenance of hand tools. ENGLISH Role-Play on the routine maintenance of tools. SCIENCE Conduct a demo-teaching on how to clean and maintain laboratory tools/apparatus. MATH Solve problems using
TECHNOLOGY Why is routine maintenance of tools important? ENGLISH How valuable/effective is routine maintenance of tools? SCIENCE What are the things to consider in maintaining
10
proportion on cleaning and maintaining hand tools.
tools/equipment? MATH Why is there a need to use proportion on cleaning and maintaining hand tools?
4.3 Tools are stored safely in appropriate locations in accordance with manufacturer’s specifications or standard operating procedures.
Storing tools
TECHNOLOGY Mock demonstration on storing tools safety.
11
QUALIFICATION TITLE: COMPUTER HARDWARE SERVICING NC II
UNIT OF COMPETENCY: TERMINATE AND CONNECT ELECTRICAL WIRING AND ELECTRONICS CIRCUIT (COMMON)
MODULE TITLE: TERMINATING AND CONNECTING ELECTRICAL WIRING AND ELECTRONIC CIRCUIT
LEARNING
OUTCOMES
ASSESSMENT
CRITERIA
LEARNING CONCEPTS/CONTENT LEARNING ACTIVITIES
GUIDE QUESTIONS
TECHNOLOGY
SCIENCE
MATH
ENGLISH/COMM
LO 1. Plan and prepare for termination / connection of electrical wiring / electronic circuit
1.1 Materials are
checked according to specifications and tasks.
Controlling variables
Y-4
Understand the basic concepts and principles of electricity…
Draw/sketch the circuit diagram
Y-2
Solve problems involving measurement
Y-2
Distinguish between informative and theoretical questions, core and follow up questions
ENGLISH Conduct small group discussion on planning and preparing for termination/connection of electrical wiring. SCIENCE Group Exploration through Learning Station (Short Activity about electrical quantities/components. MATH Answer Problems involving measurement.
ENGLISH How effective is small group discussion on planning, preparing, terminating, and connecting of electrical wiring? SCIENCE How do you prepare the electrical components and circuit? MATH Why is there a need to check the measurement
12
of the material before using it?
1.2 Appropriate tools and equipment are selected according to tasks requirements.
Observing OH&S guidelines manual
Y-4 Understand the basic concepts :
Translate circuit diagrams into actual circuits.
Y-2 Respond orally to the ideas and needs expressed in face to face interviews in accordance with the intended meaning of the speaker .
ENGLISH Conduct an oral report on the selection of tools and equipment used. SCIENCE Draw the circuit diagram of electrical/ electronic circuit and translate to actual circuit.
ENGLISH Why is there a need on the appropriate selection of tools/equipment? SCIENCE What are the important things to remember in translating the diagram into actual circuit?
1.3 Task is planned to ensure that OH&S guidelines and procedures are followed.
ENGLISH Use infinitives to construct objectives for plan. SCIENCE Conduct
ENGLISH What are the procedures in planning a task?
13
simulation of different electrical connections.
1.4 Electrical wiring / electronics circuit are correctly prepared for connections / termination in accordance with instructions and worksite procedure.
LO 2. Terminate / connect electrical wiring / electronic circuit
2.1 Safety procedure in using tools are properly observed at all times and appropriate personal protective equipment are used.
Using personal protective equipment
Y-2 Understand the basic concepts of :
Discuss and practice safety measures in dealing with electricity/electronics
TECHNOLOGY/SCIENCE Discuss safety procedures/job specification in terminating/connecting electrical wiring /electronic circuit.
TECHNOLOGY/SCIENCE How do you terminate /connect electrical wiring / electronics circuits properly?
2.2 All work is safely in accordance with the workplace and standard procedures.
Using pliers, cutters, screw drivers, soldering iron for terminating / connecting electrical wiring
Y-1 Demonstrate safe ways of using the tools/equipment in the laboratory.
TECHNOLOGY/SCIENCE Conduct simulation of termination/ connection of electrical/
TECHNOLOGY/SCIENCE Why do you need to practice safety precautions in terminating/co
14
/ electronics circuit.
electronic circuit ENGLISH Listen to and carry out instructions given.
nnecting electrical /electronic circuits? ENGLISH Is following instructions needed?
2.3 Appropriate range of methods in termination / connection is used according to specifications, manufacturer’s requirements and safety
Performing provisions on wiring techniques
Y-2 Use appropriate models of developing to express ones idea, needs, feeling and attitudes.
ENGLISH Make a pop-up books on the procedure of terminating and connecting electrical and electronic circuits.
ENGLISH How important is narration in developing a paragraph?
2.4 Correct sequence of operation is followed per SOP
Y-2 Perform operations on radical expressions.
MATH Solve problems involving radical expressions.
MATH Why is there a need to perform the correct sequence of operation in solving radical expressions?
2.5 Accessories used are adjusted, if necessary.
2.5 Confirm termination / connection is undertaken
Y-1 Solve problems involving measurements.
MATH Give set of problems involving
MATH Why is it important to measure the
15
successfully in accordance with job specifications.
measurement of the materials to be used in electrical wiring.
material to be used before performing electrical connection or termination?
LO 3. Test termination / connections of electrical wiring / electronic circuit
3.1 Testing all completed termination / connections of electric wiring / electronic circuits is conducted for compliance with specifications and regulations using appropriate procedures and equipments.
Observing principles on single phase AC.
Y-1,4 Analyze how electrical energy is transferred or transformed into other form.
Y-2 Use appropriate models to develop to express ones ideas, feeling, needs and attitudes.
ENGLISH Writing a narrative report base on the observed results. SCIENCE Develop a poster conveying the wise use of electrical energy, through a visual presentation.
ENGLISH What are the guidelines to be considered in writing a narrative report? SCIENCE How is the concepts of transformation of electrical energy use to test termination/connection of electronic circuit?
3.2 Wiring and circuits are checked using specified testing procedures.
Complying with the Manuals on testing instruments / equipments
Y-4 Understand the basic concepts of:
Trace electric
TECHNOLOGY Conduct a hands-on-activity to check wiring and circuit.
TECHNOLOGY/SCIENCE How do you check the electric/electronic wiring and
16
l. circuit/ connections
SCIENCE Construct a Concept Map on circuit connection.
circuit?
3.3 Accidental events or conditions are responded to in accordance with established procedures.
Terminating and connecting electrical wiring /electronics circuit
16
CONTEXTUAL LEARNING MATRIX
QUALIFICATION TITLE: COMPUTER HARDWARE SERVICING NC II
UNIT OF COMPETENCY: INSTALL COMPUTER SYSTEM AND NETWORK (CORE)
MODULE TITLE: INSTALLING OF COMPUTER SYSTEM AND NETWORK
LEARNING
OUTCOMES
ASSESSMENT
CRITERIA
LEARNING CONCEPTS LEARNING COMPETENCIES LEARNING ACTIVITIES
GUIDE QUESTIONS
TECHNOLOGY
SCIENCE
MATH
ENGLISH/COM
M
LO 1. Plan and prepare for installation
1.1 Installation
procedures that conform with the requirement of the OHS policies and procedures are carefully studied and planned.
Reading and interpreting installation manual.
Y-4 Understand the basic concepts and principles of electricity:
Draw/sketch the circuit diagram
Y-I Demonstrate knowledge and skill in Linear measurements.
Y-2 Illustrate understanding of thought relationships in a given text using the appropriate charts (flow chart tree diagram grid)
ENGLISH Making a flow chart Make a flow chart in planning and preparing installation. SCIENCE Conducting hands-on activity Conduct hands on activity to plan and sketch the circuit diagram. MATH Group Discussion Conduct group
TECHNOLOGY/ SCIENCE/ENGLISH
How important is reading the installation manual before installing computer network? MATH Why do you plan and prepare the necessary materials before measuring? ENGLISH What is the significance of using a flow chart.
17
discussion to plan and prepare installation using measurement and be assessed using rubrics.
1.2 Location of necessary devices / systems is determined according to job requirements.
Planning a project on networking
Y-4 Understand the basic concepts and principles of electricity…
Trace the electrical component & connection
Y-2 Illustrate understanding in the given text using the appropriate chart (flow chart, tree diagram or grid)
TECHNOLOGY Fill-out of forms Fill-out our order slip/request slip. ENGLISH Making a flow chart Make a flowchart to present steps/procedures in planning and preparing installation. SCIENCE Conducting hands-on activity
TECHNOLOGY Why is it important to plan first before performing the task? ENGLISH What is the significance of using a flow chart? SCIENCE Why is it important to know how to trace the different locations of devices of electronics?
18
Hands-on activity: Conduct an exercise regarding electrical components and circuit connection
1.3 Appropriate tools, equipment and testing devices that conform with OH&S are identified.
Performing the procedure in using safety the manual.
Use of non-verbal communication during discussions
ENGLISH Role Playing Conduct role-play of procuring equipment/materials
ENGLISH What are the appropriate tools that conform to OH&S standard?
19
1.4 Strict impositions of material specification are followed
Familiarizing with and follow the FCC Manu al.
Y-2 Use descriptive words in detailing to support purpose for procurement.
ENGLISH Improving ones vocabulary Improve vocabulary on quantifying Classifying tools according to OHS.
ENGLISH How do you follow strict imposition of materials?
1.5 Approval of laboratory teachers is emphasized in line with planned procedures.
Listing and specifying the necessary tools, equipment and material.
1.6 Unavoidable circumstances related to preparatory works are enumerated and given priority.
Utilizing the different troubleshooting techniques.
TECHNOLOGY Why is it important to use the troubleshooting manual
Unlock vocabulary difficulties.
ENGLISH Improve vocabulary on quantifying. Classifying
20
Conduct simulation of installing equipment/ devices/systems, in groups and individually tools according to OHS.
LO 2. Install equipment / devices / systems.
2.1 Standard
procedures for OH&S in installing devices / systems are followed.
Applying the safety procedures from the safety manual
Y-4 Understand the basic concepts of :
Discuss and practice safety measures in dealing with electricity/electronics
Y-1, 2 Use systems of linear equations to solve problems.
Conduct simulation of installing equipment/devices/system
MATH Problem Solving Solve problems involving system of equations showing the method used. SCIENCE Making a poster Poster making on safety measure in dealing with electric/electronic devices
MATH Why do you need to follow certain procedure in solving systems of equation? TECHNOLOGY /SCIENCE What are the safety precaution in installing electrical/electronic devices?
21
2.2 Operating system/devices are installed according to the workplace standard.
Following FCC and Product Standard Manual.
2.3 Modification and innovation of devices / systems are done during installation with the consent of the client.
Planning the work (Work Planning)
Y-1 Apply the scientific method in conducting simple scientific investigations:
Identify limitations and make recommendations for further study.
SCIENCE Conducting a group activity Group Exploration through learning station (short activity on installing devices/system)
TECHNOLOGY/ SCIENCE How important is knowing the limitations in doing modifications /innovation in installing devices.
2.4 Installations of the devices / systems are carried out in the consonance with the unit of specification.
Installing device base on the manufacturer’s manual
TECHNOLOGY Why is it important to follow the manufacturer’s manual
22
2.5 Unplanned events or are carried out following re the unit of specification and procedures.
Utilizing the troubleshooting manual
2.6 Approval obtained before any contingencies is implemented based or established procedures.
Implementing the work plan base on the established procedure.
2.7 Standard testing procedures is strictly followed for the newly installed device / system.
Conducting a test-run on the system network.
LO 3. Conduct validation and Testing
3.1 Occupational Health & Safety policies are strictly followed resulting to no lost time injury.
Following the Occupational Health and Safety policies
Y-1 Organize qualitative and quantitative observation.
Y-2 Preparing checklist of working procedure .
ENGLISH Perform a checklist Make a checklist of working procedures for validating and testing of performance
ENGLISH What are the important things that should be remembered when installing computer systems/ network?
23
3.2 Specified testing procedures for circuit and system are carried out.
Performing the procedure in testing network system
Y-1 Apply the scientific method in conducting a simple scientific investigation
Y-4 Draw a graph of a given set of ordered pairs; determine whether the graph represents a function or a relation.
MATH Graphing using variables Prepare a table of values for the given relation and graph it. Test whether the given relation is a function or not using the vertical line test.
MATH What is the importance of testing/checking in determining whether the given relation a function or not?
3.3 Installed devices / systems are protected against loss / or damage in accordance with established standard.
Using personal protective equipment during installation
Y-3 Writing a narrative report.
ENGLISH Writing narrative report Write narrative report on installation performance
ENGLISH How are installed devices protected?
24
3.4 Approval of laboratory teacher is confirmed before any validation or testing is employed.
Creating a component checklist conforming with the laboratory teacher before conducting a test-run
TECHNOLOGY Why is it important to use a component checklist
3.5 Installation proceedings, devices / systems test which conforms specified requirements followed
Following the proper installation Based on the installation manual.
TECHNOLOGY Why do we need to follow the installation manual
3.6 Device system to cause malfunction of the system is removed, tested and returned to pretest condition in accordance with the established procedures.
Performing troubleshooting techniques
TECHNOLOGY Simulation Exercise or Return Demonstration on:
25
3.7 Final inspection, testing and validation are undertaken to ensure quality
Testing computer system base on the standard operating procedures
TECHNOLOGY Demonstrating the procedure Removing device system causing the malfunction of the system
3.8 Documentation of the performed job is submitted to a laboratory teacher following the format given.
Preparing an accomplish report
TECHNOLOGY Demonstrating the procedure Inspection testing and validating procedures
1
QUALIFICATION TITLE: COMPUTER HARDWARE SERVICING NC II
UNIT OF COMPETENCY: DIAGNOSE AND TROUBLESHOOT COMPUTER SYSTEM (CORE)
MODULE TITLE: DIAGNOSING AND TROUBLESHOOTING OF COMPUTER SYSTEM
LEARNING OUTCOMES
ASSESSMENT
CRITERIA
LEARNING CONCEPTS LEARNING ACTIVITIES
GUIDE QUESTIONS
TECHNOLOGY
SCIENCE
MATH
ENGLISH/COMM
LO 1. Formulate plans and prepare for diagnostic procedures of the computer system.
1.1 Plans and procedures that are accordance with the job requirements are formulated.
Observing diagnostic procedure for the job
Y-1,4 Formulating hypothesis and drawing conclusion
Y-2 Solve problems involving measurement
Y-1 Observe social and linguistic conventions in oral transactional discovered
ENGLISH Conduct verbal interaction on policies and diagnostic procedures for the computer system. MATH Problem solving involving the measurement of the wire. SCIENCE Design a simple experimental set-up for diagnosing/ trouble shooter computer system
TECHNOLOGY/SCIENCE/ENGLISH How do you formulate and prepare diagnostic procedures for the computer system? MATH Why do you need to check the measure of the material before using it?
2
1.2 OH&S policies are carried out along with the job requirements.
Carrying out of OH&S policies
Y-1,4 Apply the scientific method in conducting a simple scientific investigation
Y-4 Transcode orally and in writing the information presented in diagram, chart, table graphs, etc.
ENGLISH Submit output on formulating plans and preparations for diagnostic procedures for the computer system. SCIENCE Conduct small discussion applying science techniques.
TECHNOLOGY What are the difficulties encountered during diagnosing and troubleshooting? SCIENCE What is the importance of applying science techniques
1.3 Coordination with the teacher concern and the client is taken into consideration before any implementation is carried out.
Considering the teacher concerned and the client before carry out the task
Y-3 Apply deductive skills to show congruence between triangle congruence
MATH With the guidance of the teacher, prove the different triangle congruence.
MATH What do you feel when a teacher guides you in proving the different triangle congruence? TECHNOLOGY Why do you need to consult your teachers before carrying out tasks?
1.4 Required materials for the job are obtained and validated against the requirements of the task
Obtaining and validating the required materials for the job
Paragraph writing using linkers/ transitional device
ENGLISH Write a paragraph using linkers in performing computer operation
ENGLISH What are the criteria for validating materials? TECHNOLOGY Why do we need to validate the materials before using?
3
1.5 Appropriate tools, equipment and testing devices are requested following the proper operation and safety.
Requesting appropriate tools, equipment and testing devices
TECHNOLOGY Why do we need to choose the appropriate tools for the job?
1.6 Computer system network defects are confirmed against job requirements.
Identifying and confirming computer defects against job requirements
Y1- Give instructions and warnings
ENGLISH Group discussion on formulating planning and preparing for diagnostic procedure of the computer system.
ENGLISH Is group discussion easy to tackle to be able to arrive at the certain point? TECHNOLOGY What is the method used in identifying computer defects?
4
LO 2. Diagnose computer faults and other defects of Computer system.
2.1 Appropriate personal protective equipment is used.
PC troubleshooting and diagnosing techniques.
Y-1,4 Identify the different parts of science laboratory tools and equipments.
Y-1 Give clear commands, requests, and directions to get things done.
ENGLISH Discuss standard procedures on diagnosing fault problems. SCIENCE Conduct Hands-on-Activity for diagnosing computer faults and defects
TECHNOLOGY/SCIENCE/ENGLISH What are the procedures followed in identifying computer faults and defects?
2.2 Standard procedures for fault and problems diagnosis are done according to requirements.
Observing standard procedure for fault and problem diagnosis
Steps in scientific method (Identifying problems and making hypothesis)
Communicate thoughts, feelings and one’s needs using appropriate style.
ENGLISH Write a narrative report on computer faults and defects. SCIENCE Conduct a Problem-Based Activity applying the steps in diagnosing faults and problems in computer system.
ENGLISH Why do procedures for faults and problems diagnoses be done according to requirements? SCIENCE Why the step in scientific method important in diagnosing defects/faults in computer tasks?
5
2.3 Emergency procedures are put under control in accordance with the established procedures.
Following emergency procedure
TECHNOLOGY What is the importance of following emergency procedure?
2.4 Accidental events or conditions are responded to according to the established standard operating procedures.
Responding to victims of accidents or conditions
Y-1,4 Discuss Safe ways of using apparatus/equipments in laboratory
Y-3 Write reactions to books read or movie seen
ENGLISH Write a reaction paper on accidental events or conditions SCIENCE Group discussion of situational analysis of accidental events.
ENGLISH/SCIENCE/TECHNOLOGY How do accidental events or conditions respond to the established Standard Operating Procedures?
6
LO 3. Replace and provide remedies for defective computer parts.
3.1 Necessary corrections and improvements or adjustments are executed with the approval of the client and the teacher in charge.
Removing defective components/computer parts properly.
Y-1,4 Give importance to scientific or desirable attitudes such as concern for the protection of the environment
Y-1 Use outline to sum up ideas taken from a expanded text.
TECHNOLOGY Prepare chart which contains defects and remedies for each. ENGLISH Make an outline on replacing and providing remedies for defective computer parts SCIENCE TV-Viewing: Documentary of Causes & Effects of industrial waste.
TECHNOLOGY/SCIENCE How do you solve problems with defective computer parts? ENGLISH What are the remedies used in replacing defective computer parts? SCIENCE How do you discard defective electronic parts or components?
3.2 Discarding of defective components / parts is done in compliance with environmental laws and regulations.
Disposing of industrial waste in accordance with the environmental law
Y-1 Giving importance to scientific values and desirable attitudes such as (concern for the protection and conservation of the environment)
SCIENCE TV-Viewing : Documentary about Cause and Effects of Disposing Industrial Waste
TECHNOLOGY/SCIENCE What are the proper ways of disposing industrial waste?
3.3 Accidental events or conditions are responded to according to the established standards and procedures.
Responding to victims of accidental events or conditions.
TECHNOLOGY What is the first thing you should do during accidents in the laboratory?
7
3.4 Equipment needed are in conformity with OH&S standards
Using the equipment need in diagnosing defective computer parts.
Y-1 Do a self and peer editing of written output using a set criteria
ENGLISH Edit a written output on equipment needed
TECHNOLOGY/ENGLISH How do you know if the equipment needed are in conformity with OH & S Standard
LO 4. Test run the repaired computer system
4.1 Validation of performed task is executed ensuring safe operation.
Performing the validation of the task to ensure safe operations.
Y-3 Express in writing the satisfaction or dissatisfaction over services performance ,etc completed in journal entries, reviews.
TECHNOLOGY Conduct simulation of replacing computer parts and testing them
TECHNOLOGY How do you conduct dry-run of repaired computer system? ENGLISH How would you validate a performed task that ensure safe operation?
4.2 Accidental events or conditions are responded according to established standards and procedures
Responding to accident events or conditions.
8
4.3 An accomplishment report is submitted to the teachers concerned in compliance with the subject requirements
Accomplishing and submitting reports to the concerned teachers.
Y-1,2,3,4 Discuss the importance of scientific value in decision making and problem solving in daily life.
SCIENCE Make journal about the learned lessons about diagnosing and troubleshooting of computer system and reflection to daily life.
SCIENCE What are the importance of following guidelines and procedures in any laboratory tasks and the desirable attitudes to be developed?
1
CONTEXTUAL LEARNING MATRIX
QUALIFICATION TITLE: COMPUTER HARDWARE SERVICING NC II
UNIT OF COMPETENCY: CONFIGURE COMPUTER SYSTEM AND NETWORKS (CORE)
MODULE TITLE: CONFIGURING COMPUTER SYSTEM AND NETWORK
LEARNING OUTCOMES
ASSESSMENT
CRITERIA
LEARNING CONCEPTS
LEARNING COMPETENCIES LEARNING ACTIVITIES
GUIDE QUESTIONS TECHNOLOGY
SCIENCE
MATH
ENGLISH/COMM
LO 1. Arrange, plan and prepare for configuration task.
1.1 The laboratory teacher’s instruction in identifying computer system network to be configured is followed.
Follow the computer system network configuration
Y-1,2,3,4 Apply the step in scientific methods in conducting scientific investigation
Y-3 Illustrate, name and identify different geometric figures.
Y-4 Ask for and give information and express needs, attitude, explicitly and implicitly in informative talk.
MATH Draw geometric figures based on the given set of instruction. ENGLISH Conduct small group discussion on arrangement of plan and preparation for configuring task.
MATH What is the importance of following directions in drawing geometric figures? TECHNOLOGY/SCIENCE Why is preparation important in configuration task?
1.2 The Configuration plan is organized and prepared based on the job requirements
Organizing and preparing the configuration plan base on the job requirements
Y1,2,3,4 Designing simple experimental/ investigation
Y-3 Use accompanying non-verbal cues to highlight significant point in extended discourse
ENGLISH Report by group about configuration task Science Arrange laboratory set-up for configuring computer system.
ENGLISH How is configuration plan organized and prepared?
1.3 Performance of computer system network for
Validating the performance of the configure computer
Y-1,2,3,4, Performing simple experiment/
Y-2 Express thoughts, ides for specific
ENGLISH Write a well constructed paragraph
TECHNOLOGY Why do we need to properly configure
2
configuration purposes is validated along with its specification
system network
investigation with care and precisions.
purposes. on how to arrange plan and prepare for configuration task. Science Conduct group discussion for configuration task Technology Prepare and submit configuration output
computer network?
1.4 Appropriate materials for the task are used to conform to OH&S standards
Using the appropriate materials to be use for the task
TECHNOLOGY Prepare and submit configuration output
TECHNOLOGY What are the tools needed in installing networks?
1.5 Tools, equipment and testing devices needed to accomplish the task conform with OH&S standards.
Checking of tools, equipment and testing devices
Y-4 Point out the effectiveness of the devices used by the speaker
ENGLISH Conduct a panel discussion on tools and equipments and testing devices for tasks accomplishment.
ENGLISH What are the tools/equipment and testing devices needed to accomplished the tasks? TECHNOLOGY Why do we need to regularly check our tools and equipment?
LO 2. Configure computer system
2.1 OH&S policies are imposed in selecting personal protection gadgets.
Following the OH&S policies in selecting personal protection gadgets
Y-1 Performing activity/investigation with care and precision
Y-4 Use attentive listening with informative text
TECHNOLOGY Conduct simulation of configuration of computer system network SCIENCE Conduct an experiment about configuration of computer system
TECHNOLOGY/SCIENCE How do you configure computer system accurately?
3
2.2 Manufacturer’s instruction manual is followed for normal system network operation
Following the manufacturers instruction manual for normal system network operations
TECHNOLOGY Prepare and submit worksheet and assignment sheets on configuration.
TECHNOLOGY Why do we need to follow the manufacturer’s manual?
2.3 Diagnostic SOP for the purpose of trouble-shooting is followed strictly.
Following the diagnostic procedure in troubleshooting
TECHNOLOGY What is the method use in troubleshooting computer networks?
2.4 Synchronization with the SOP of configuration system and network configuration is performed
Performing the synchronization of the system network configuration.
TECHNOLOGY What is the importance of synchronization in networks?
2.5 Accidental events are prioritized based on OH&S
Preparing accident reports
TECHNOLOGY Why do we need to accomplishment reports?
LO3. Analyze and try-out configured computer system and network
3.1 Another round of Inspection and test following the specified manufacturer’s instruction is carried out.
Carry out another round of inspection and test-run
Y-1 Apply the steps in scientific method:
Test the hypothesis
Y-2 Prepare and interpret contents of a columnar grid
ENGLISH Prepare and interpret a columnar grid containing equipment used, discarded defective parts, parts that abide by environmental laws and regulations, corrections, accidental events
TECHNOLOGY/ENGLISH/SCIENCE What is the importance of scrutinizing and trying-out of configured computer system?
4
3.2 Safe operation of the computer network and system is assured and guaranteed to be 100%.
Considering the safe operations of the computer network and system to be 100% guarantee
Y-1 Apply the steps in scientific method:
Drawing conclusion
Y-2 Read closely to find answers to specific questions note details.
TECHNOLOGY Accomplish worksheet assignment SCIENCE Make a laboratory write-up on the safe operation of computer system
TECHNOLOGY Why do wee need to need to achieve 100% network stability?
ENGLISH Accomplish worksheet/assignment
1
QUALIFICATION TITLE: COMPUTER HARDWARE SERVICING NC II
UNIT OF COMPETENCY: MAINTAIN COMPUTER SYSTEM AND NETWORK (CORE)
MODULE TITLE: MAINTAINING COMPUTER SYSTEM AND NETWORK
LEARNING
OUTCOMES
ASSESSMENT
CRITERIA
LEARNING CONCEPTS LEARNING
CONTENTS/ CONCEPTS
GUIDE QUESTIONS
TECHNOLOGY
SCIENCE
MATH
ENGLISH/COM
M
LO 1. Plan and prepare maintenance procedure
1.1 Planning and
preparing for the maintenance task is organized as pre-requisite.
Workplace meeting and discussion
Y-1,4 Stating clearly one’s hypothesis, procedure data/tables for scientific investigation
Y-4 Draw the graph of functions.
Y-1,2 Deliver a short informative task using intonations and stress for emphasis and contract
MATH Prepare and write the steps on how to draw the graph of different types of function using the simple present tense of the verb. ENGLISH Pronunciation Drill
MATH 4 Why is it important to prepare, plan and follow the given instruction in graphing different types of functions?
1.2 Execution of OH&S policies are carried out along with the task
Occupational Health and Safety
Y-1,2,3,4 Discuss the scientific research of some scientist which illustrates/demonstrates laboratory rules and safety
Interpersonal relationship Arrive at a consensus on issues by assessing statements made
TECHNOLOGY Prepare and submit assignment sheets and worksheets on planning and preparing maintenance procedures. SCIENCE Power point presentation on the scientific research &
SCIENCE Differentiate the policies followed by scientist /researchers to the Occupational
2
investigation of scientist and compare it to OH&S policies of industry.
Health and Safety of Industry?
1.3 Computer system are checked for maintenance purposes.
Performing computer work and operation
Y-2,3 Distinguish facts and opinions.
ENGLISH Write whether the statement given is fact or opinion.
ENGLISH Why should computer systems be checked regularly?
3
1.4 Appropriate materials are used for ensuring work delivery that conforms with the task.
1.5 Proper tools and equipment and testing devices for maintenance purposes are obtained and checked for smooth operation
Identifying and classifying tools and equipment
Observe characteristics with precision and accuracy by using measuring instruments.
SCIENCE Activity on measurement to test the functionality and accuracy of measuring tolls and equipment
SCIENCE What are the ways in testing the functionality and accuracy of tools/equipment
1.6 Computer system and network to be maintained are identified based on the teacher’s instructions.
Testing and validating materials
4
LO2. Maintain computer system and networks
2.1 Appropriate personal protective equipment are used in conformity to standard procedure
Applying quality standards. Performing computer operation. Practicing career professionalism. Validating tools and materials based on validation requirements for computer specifications.
Y-1,2,3 Use laboratory apparatus appropriately.
Y-1 Conduct simulation exercise.
TECHNOLOGY Make a poster containing the Do’s and Don’ts in the maintenance of computer system and network ENGLISH Conduct simulation of maintenance of computer system and network Science Conduct a simple science activity/experiment that demonstrate the proper use of protective equipment.
How do you keep computer system and network running TECHNOLOGY/SCIENCE How important is using personal protective equipment in maintaining computer system?
5
LO 3. Inspect and test computer system and network
3.1 Final inspection of the device is instituted to ensure task perfection.
Maintaining professional growth and development
Y-1 Perform laboratory work following continuously the warning signs in the use of chemicals/tools/equipment
Y-4 Draw the graph of polynomial functions of degree greater than 2(using graphing calculator).
Y-1 Prepare checklist of itemized inspection and instruction
Make a write-up interpreting charts and graphs.
MATH Solve problems involving graphs of polynomial functions using graphing paper and check using graphing calculator. SCIENCE Perform experiment following the different
MATH What is the importance in graphing polynomial functions in different ways? Why still use graphing calculator?
2.2 Periodic maintenance of equipment is performed following manufacturer’s requirements
2.3 Established
procedures are followed in case of repair and parts replacement
2.4 Accidental
events or conditions are responded to in accordance with the established standards.
6
and device.
Prepare a checklist of itemized inspection and testing instruction of system and network.
warning signs, safe ways in using tools and apparatus/precautions in the laboratory.
SCIENCE Why do warning signs important in performing laboratory tasks?
3.3 Laboratory management and maintenance is ensured to conform with company atmosphere.
Performing computer operations.
7
3.4 Accomplishment report is submitted to teacher concern after finishing the task.
Setting up and maintaining work station Preparing accomplish-ment report
Y Collect data and present them in an appropriate format
SCIENCE Make a science journal; including collections of data & findings and learned competencies for maintaining computer system
TECHNOLOGY/SCIENCE What have you learned in maintaining computer system/networks?
8
Write an accomplishment report
Write an accomplishment report on the inspection and test of computer system and network
