5
232 OPHTHALMOLOGY INSTRUMENT AND BOOK SUPPLEMENT 1984 and audio indicators monitor battery charge level, probe and power supply functions; footswitch control. Probe features-Flash, steam or gas sterilization. OMS or Banana Plug connectors.* Wetfield or Under- water use . 20 gauge Endodiathermy Probe, blunt coaxial tip, #13- 09-01 20 gauge Endodiathermy Probe, pointed coaxial tip, #13-06-01 20 gauge Retinopexy Exo-Probe, 30° pointed coaxial tip, #13-08-01 20 gauge Bipolar Cauterizer, 45° coaxial tip , #13-19-01 t20 gauge Scleral Marker Probe, 90° point, coaxial light, # 13-07 -01 #3 Forceps straight, #13-03-01 #5 Forceps miniature, #13-04-01 #7 Forceps curved, #13-05-01 16-gauge Diathermy Clips, #13-14-01 +19/20 gauge Diathermy Clips, #13-13-01 * Part numbers indicate OMS connectors . Other connectors are available upon request. t (Illumination to be supplied by OMS Twin Cold Light Source #06-01-01) + (Clips slip over cutters, light probes and pics providing for Charles Bi-manual technique) Specifications : Frequency: 2 MHz Power Output: 12W @ 400 ohms Power: 12 V, 2 amp-hrs Dimensions: 15.3 cm H x 15.2 cm W x 15.8 cm D, 2.3 kgs . Light weight , portable, modular. One year warranty Power Supply, Six Months Probes and Forceps Price: $995, Power Supply Computers Trilogic Corporation TRI -MEDTrilogic Corporation provides a complete, affordable practice management computer hardware/ software system for solo and small to medium group practices . Complete mUlti-user and IBM PC hard disk configurations are available. Standard Software includes insurance, billing, accounts receivable, patient registration and records , practice analysis, and patient communications . In addition, options include word processing, detailed medical records , accounts payable, general ledger, payroll, inventory, data communications, data base management and spreadsheet. This is a complete hardware/software package : Trilogic provides g!! support services including installation, in office training , and ongOing hardware/software services. In addition a toll free hot line, remote diagnostics and a comprehensive customer protection plan is provided for each practice. Price on request Contact Lenses American Optical Corporation/Soft Contact Lens Business Softcon (vifilcon A) The Softcon® Lens is a lathe-cut, soft, hydrophiliC lens with a high water content and geometriC deSign which provides superior corneal compatibility and all-day comfort . The refractive power is cut on the anterior surface, making power relatively independent of fit. The posterior and anterior surfaces have spherical base curves and both surfaces are lenticulated. The lens contains 55% water by weight. It has a refractive index of 1. 415 and visible light transmission of 96.9. The Softcon Soft Contact Lens is available as a spherical lens for nearsightedness (myopia), farSightedness (hyperopia) and after cataract surgery (aphakia) . The Softcon Soft Contact Lens is a hemispherical, flexible shell of the following dimensions: Diameter 14.0 mm, 14.5 mm Center thickness .10 mm to .64 mm (dependent on power) Base curve 7.8 mm, 8.1 mm, 8.4 mm, 8.7 mm Powers -8.00 D to + 18.00 D Price on request Softcon EW (vifilcon A) The Softcon EW Soft Contact Lens contains 55% water by weight. It has a refractive index of 1.415 and visible light transmission of 96.9. The Softcon EW lens is indicated for up to 30 days of continuous wear for nearSightedness (myopia), farsightedness (hyperopia), and after cataract surgery (aphakia). The Softcon EW is a hemispherical, flexible shell of the following dimensions: Diameter 14.0 mm (Plus + Minus), 14.5 mm (Aphakia Only) Center thickness .06 mm to .125 mm Base curves 7.8 (Aphakia Only), 8.1, 8.4 , 8.7 Powers -6 . 00 D to +18. 00 D Price on request AOSOFT (tetrafilcon A) The AOSOFT® Hydrophilic Contact Lens is a spherical bicurve lens with optimal water content to utilize both heat and chemical disinfection. Its deSign , combined with one diameter and five base curves, assures quick and easy fitting. It is a cast lens containing 42.5% water by weight, has a refractive index of 1.43 and visible light transmission of 97% . The AOSOFT Soft Contact Lens is available in the following dimensions: Diameter 13.0 mm Base curves/Vaults 9.0 mm/O, 8.7 mm/1, 8.4 mm/ 11,8.1 mm/111, 7.8 mm/1V Center thickness Minus 0.12 mm to 0.22 mm; Plus 0.14 mm to 0.28 mm Powers -0.25 D to -9 . 75 D in 0. 25 D steps; +0. 25 D to +6. 50 D in 0.25 D steps Price on request

Contact Lenses

Embed Size (px)

Citation preview

232 OPHTHALMOLOGY • INSTRUMENT AND BOOK SUPPLEMENT 1984

and audio indicators monitor battery charge level, probe and power supply functions; footswitch control.

Probe features-Flash, steam or gas sterilization. OMS or Banana Plug connectors.* Wetfield or Under­water use.

20 gauge Endodiathermy Probe, blunt coaxial tip, #13-09-01

20 gauge Endodiathermy Probe, pointed coaxial tip, #13-06-01

20 gauge Retinopexy Exo-Probe, 30° pointed coaxial tip, #13-08-01

20 gauge Bipolar Cauterizer, 45° coaxial tip, #13-19-01 t20 gauge Scleral Marker Probe, 90° point, coaxial

light, # 13-07 -01 #3 Forceps straight, #13-03-01 #5 Forceps miniature, #13-04-01 #7 Forceps curved, #13-05-01 16-gauge Diathermy Clips, #13-14-01 +19/20 gauge Diathermy Clips, #13-13-01 * Part numbers indicate OMS connectors. Other

connectors are available upon request. t (Illumination to be supplied by OMS Twin Cold Light

Source #06-01-01) + (Clips slip over cutters, light probes and pics

providing for Charles Bi-manual technique) Specifications:

Frequency: 2 MHz Power Output: 12W @ 400 ohms Power: 12 V, 2 amp-hrs Dimensions: 15.3 cm H x 15.2 cm W x 15.8 cm D,

2.3 kgs . Light weight, portable, modular. One year warranty Power Supply, Six Months Probes

and Forceps Price: $995, Power Supply

Computers

Trilogic Corporation TRI-MED'·

Trilogic Corporation provides TRI-MED~ a complete, affordable practice management computer hardware/ software system for solo and small to medium group practices. Complete mUlti-user and IBM PC hard disk configurations are available. Standard Software includes insurance, billing, accounts receivable, patient registration and records, practice analysis, and patient communications. In addition, options include word processing, detailed medical records, accounts payable, general ledger, payroll, inventory, data communications, data base management and spreadsheet.

This is a complete hardware/software package: Trilogic provides g!! support services including installation, in office training, and ongOing hardware/software services. In addition a toll free hot line, remote diagnostics and a comprehensive customer protection plan is provided for each TRI-MED~ practice.

Price on request

Contact Lenses

American Optical Corporation/Soft Contact Lens Business Softcon (vifilcon A)

The Softcon® Lens is a lathe-cut, soft, hydrophiliC lens with a high water content and geometriC deSign which provides superior corneal compatibility and all-day comfort. The refractive power is cut on the anterior surface, making power relatively independent of fit. The posterior and anterior surfaces have spherical base curves and both surfaces are lenticulated. The lens contains 55% water by weight. It has a refractive index of 1.415 and visible light transmission of 96.9.

The Softcon Soft Contact Lens is available as a spherical lens for nearsightedness (myopia), farSightedness (hyperopia) and after cataract surgery (aphakia). The Softcon Soft Contact Lens is a hemispherical, flexible shell of the following dimensions: Diameter 14.0 mm, 14.5 mm Center thickness .10 mm to .64 mm (dependent on

power) Base curve 7.8 mm, 8.1 mm, 8.4 mm, 8.7 mm Powers -8.00 D to + 18.00 D

Price on request Softcon EW (vifilcon A)

The Softcon EW Soft Contact Lens contains 55% water by weight. It has a refractive index of 1.415 and visible light transmission of 96.9. The Softcon EW lens is indicated for up to 30 days of continuous wear for nearSightedness (myopia), farsightedness (hyperopia), and after cataract surgery (aphakia). The Softcon EW is a hemispherical, flexible shell of the following dimensions: Diameter 14.0 mm (Plus + Minus), 14.5 mm

(Aphakia Only) Center thickness .06 mm to .125 mm Base curves 7.8 (Aphakia Only), 8.1, 8.4, 8.7 Powers -6.00 D to +18.00 D

Price on request AOSOFT (tetrafilcon A)

The AOSOFT® Hydrophilic Contact Lens is a spherical • bicurve lens with optimal water content to utilize both heat and chemical disinfection. Its deSign, combined with one diameter and five base curves, assures quick and easy fitting. It is a cast lens containing 42.5% water by weight, has a refractive index of 1.43 and visible light transmission of 97%. The AOSOFT Soft Contact Lens is available in the following dimensions: Diameter 13.0 mm Base curves/Vaults 9.0 mm/O, 8.7 mm/1, 8.4 mm/

11,8.1 mm/111, 7.8 mm/1V Center thickness Minus 0.12 mm to 0.22 mm; Plus

0.14 mm to 0.28 mm Powers -0.25 D to -9.75 D in 0.25 D steps; +0.25

D to +6.50 D in 0.25 D steps Price on request

DESCRIPTION OF PRODUCTS 233

AOSOFT SUPERTHIN'" (tetrafilcon A) . The AOSOFT SUPERTHIN Soft Contact Lens is a

hemispherical shell which covers the cornea and may cover a portion of the sclera. When fully hydrated, the AOSOFT SUPERTHIN Lens contains 42.5% water by weight. The lens material has a refractive index of 1.43, and the lens has a visible light transmittance greater than 97%. The AOSOFT SUPERTHIN is indicated for daily wear for the correction of vision in persons with non-diseased eyes who have spherical

.ametropias, corneal astigmatism of 2.50 0 or less and/or refractive astigmatism of 2.00 0 or less.

. The AOSOFT SUPERTHIN is available in the following dimensions: Diameter 14.25 mm Base curve 8.2 mm, 8.6 mm Power -0.25 0 to -7.75 0 in 0.25 0 steps Center thickness 0.05 mm to 0.07 mm

Price on request

AOMUL TIVUE'· (tefilcon) bifocal soft contact lens The .AOMUL TlVUE (tefilcon) contact lens is a

hemispherical shell of the following dimensions: Diameter 13.8 mm Center thickness Varies with power, typically 0.06

mm for minus lenses; increases with increasing plus powers

Base curve 8.3 mm, 8.6 mm, 8.9 mm (Plus powers only.)

Powers -6.00 0 to +6.00 0 Add powers 1.50 0, 2.00 0, 2.50 0, 3.00 0

Price on request

Breger-Mueller Welt Corp. Rigid Contact Lenses

Lenses available: Types: Single Vision, Multifocal, Bifocal Materials Available: Siloxanyl/ Acrylate (Boston II),

Siloxane/Acrylate (Paraperm O2), Polyacrylate/ Silicone (Optacryl.), and Polymethylmethacrylate (PMMA).

Flexinyl Lenses: Single Vision. Indicated for high corneal astigmats up to 6.00 0 and

for corneal rehabilitation. Diameters 7.8 mm to 9.0 mm Prices: PMMA material : Per Lens Remake Guarantee Fit Plan Paraperm O2, Boston II, or Optacryl Materials: Per Lens Remake Guarantee Fit Plan

$14.00 $10.00 $23.50

$20.00 $12.50 $30.00

Guarantee Fit Plan: 3 lenses for each eye (as required) will be made for a period of 3 months from date of purchase of first lens. Each lens will be billed when ordered and credited upon return. There will be a restocking charge of $5.00 each lens for Bullseye and Presbiflex and a restocking charge of $5.00 for each

single vision when cancelled. (Guarantee Fit Plan not applicable to your custom design).

Presbiflex Lenses: Aspherical Multifocal Indicated for presbyopic patients. Parameters: To order Plus 2.50 near add, 20/20 distance (progressive

addition) Bullseye Lenses: Spherical Bifocal Indicated for presbyopic patients. Prices: Bullseye or Presbiflex: PMMA, Boston II, Paraperm O2 ,

or Optacryl Materials: Per Lens Remake Guarantee Fit Plan Crescent Bifocal or Your Custom Design Per Lens Lost or Spare Pair (per lens) Single Vision PMMA Single Vision Gas Permeable Presbyopic lens (gas permeable or PMMA) Add on and Misc. Charges (per lens) Fenestrations Lens Analysis Lenticulars Insured Lost Lenses Modifications (per lens) First 3 months (except fenestrations) . After 3 months All modifications

Q&E (deltafilcon A)

$40.00 $32.50 $47.50

$40.00

$10.00 $12.50 $32.50

$3.00 $3.00 $5.00 $5.00

Free $3.00

The Q&E is a lathe-cut hydrophilic lens that has a large spherical posterior optical zone and universal fitting properties. Water content is 43% by weight. Refractive index is 1.43 and visible light transmission is 96%. Tensile strength is quite high, providing durability and ease of handling.

Indications . The Q&E lens is indicated for the correction of vision

in persons with non-diseased eyes who have spherical ametropias, where the residual astigmatism has little or no effect on visual acuity, and aphakia.

Contradictions Q&E hydrophilic lenses are contraindicated in the

presence of any of the following conditions: (1) Any disease affecting the cornea or conjunctiva. (2) Acute and subacute inflammation of the anterior segment of the eye. (3) Insufficiency of lacrimal secretion. (4) Corneal Hypoesthesia. (5) Any systemic diseases which may affect the eye adversely or may be exaggerated by the wearing of contact lenses.

Parameters Diameter 13.8 mm Base curves Minus: 8.3 mm, 8.6 mm, 8.9 mm. Plus:

7.8 mm, 8.1 mm, 8.4 mm, 8.7 mm, 9.0 mm Spherical powers +5.00 to -11.50 in .25 D steps. Center thickness 0.06 mm, 0.23 mm

234 OPHTHALMOLOGY • INSTRUMENT AND BOOK SUPPLEMENT 1984

Price Standard: $13.95 each Volume Discounts Available

Warranty Product: Lenses are warranted against defects in

material or workmanship. Free replacement of any a&E daily wear lens that discolors within the first twelve (12) months.

Recommended regimens Breger-Mueller Welt recommends the following

regimens: Thermal: Any FDA approved thermal system or

solution. Chemical: Any FDA approved chemical system or

solution. Do NOT mix or alternate any thermal and chemical

systems. Fitting guidelines

One variable, the base curve, is used to allow rapid and accurate fitting, using either a small trial set or dispensing inventory. First determine the base curve that provides the optimum lens-corneal relationship, indicated by lens movement and positioning. Refract over the trial lens using spheres only, to select the proper power. A professional fitting guide is available from Breger­Mueller Welt.

Initial lens selection The 13.8 mm/8.6 mm lens will fit most patients with

K readings of 41.25 through 45.50. If the lens is too tight, the flatter, 8.3 mrri lens is used; if too loose, the steeper, 8.9 mm is used.

Evaluation The lens should provide limbus to limbus coverage.

Movement with a blink should be from 0.5 mm to 1.0 mm. Lens should conSistently reposition when decentered and should lag slightly on upward gaze. Reflex should be sharp and clear.

Wearing schedule The patient should be able to wear the lens during all

waking hours on the first day. However, the eye practitioner should recommend the individual patient's wearing schedule.

a&E70 (Iidofilcon A) Daily Wear and Extended Wear

This soft contact lens is indicated for daily wear and extended wear vision correction in persons with nondiseased eyes. The high water content of the lenses results in patient comfort and sufficient oxygen transmission through the lens to permit safe daily wear and extended wear. The material has a water content of 70% by weight when fully hydrated. The safety and effectiveness of the lenses has been proven through clinical studies and worldwide use. The lenses mask up to 2.00 D of corneal astigmatism with excellent results. Contraindications

a&E70 extended and daily wear lenses are contraindicated in the presence of any of the following conditions: (1) Acute or subacute

inflammation between the lens and iris and the cornea, the anterior chamber of the eye. (2) Any disease which affects the cornea or conjunctiva. (3) Any active corneal infection: pus (purulent) bacterial, fungal, or viral infection. (4) Insufficiency of lacrimal secretion (dry eyes). (5) Corneal hypoesthesia (reduced corneal sensitivity). (6) Any systemic disease which may affect the eye or be exaggerated by wearing contact lenses.

Parameters Diameter 14.3 mm Center thickness 0.14 mm to 0.17 mm Base curves 8.40 mm, 8.70 mm, 9.00 mm Powers -.25 D to -6.00 D in .25 D steps

Price Standard: $21.95 each Volume Discounts Available

Warranty Product: Lenses are warranted against defects in

material or workmanship. Free replacement of same speCifications if a defect is noted upon opening vial & before dispensing, or immediately upon insertion.

Recommended regimens Breger-Mueller Welt recommends the following

regimens: Thermal: Any FDA approved thermal system or

solution. Chemical: Any FDA approved chemical system or

solution. Do NOT mix or alternate any thermal and chemical

systems. Fitting guidelines

One variable, the base curve, is used to allow rapid and accurate fitting, using either a small trial set or dispensing inventory. First determine the base curve that provides the optimum lens corneal relationship, indicated by lens movement and positioning. Refract over the trial lens, using spheres only, to select the proper power. A profeSSional fitting guide is available from Breger­Mueller Welt.

Initial lens selection Start with the flattest base curve that provides full

corneal coverage. The 14.3 nim/8.7 mm lens will fit most patients with K readings of 41.50 to 45.25. If the lens is too tight, the flatter 9.0 mm lens is used; if too loose, the steeper, 8.40 mm lens is used.

Evaluation The lens should provide limbus to limbus coverage.

Movement with a blink should be from 1.50 mm to 2.00 mm. Lens should conSistently reposition when decentered and should lag Slightly on upward gaze. Reflexshould be sharp and clear. .

Wearing schedule The wearing schedule should be determined by the

eye care practitioner. Patients tend to overwear the lenses initially. It is important to adhere to the initial maximum wearing schedule. Regular check-

DESCRIPTION OF PRODUCTS 235

ups as determined by the eye care practitioner are extremely important.

Daily Wear: (less than 24 hours, while awake) the maximum suggested wearing time for this soft contact lens is:

Day Hours Day Hours

1 3 7 8 2 3 8 8 3 4 9 8 4 4 10 10 5 6 11 12 6 6 12 and after all waking hours

Extended Wear: (greater than 24 hours, including while asleep.)

Caution: Not every patient is able to wear this soft contact lens on an extended wear basis.

Ciba Vision Care Softcolors'· (tefilcon) Tinted Soft Contact Lenses

Cosmetically tinted soft contact lenses in four iris­enhancing colors-green, aqua, blue and amber Diameters 13.8 mn; 14.5 mn Center Thickness (mm) .09 to .04 (varies with power) Base Curves (mn) 8.3, 8.6, 8.9; 8.6, 8.9, 9.2 Powers (D) Plano to -6.00

Price $25 per lens Practice building materials available

Cibasoft® (tefilcon) Thin design, low plus soft contact lenses Diameter 13.8 Base curves 8.3, 8.6, 8.9 Center thickness .12 at +3.00 (varies with power) Powers Plano to +6.00 D (0.25 D steps) Lens catalog available Price $16 per lens Manufacturer's warranty

BI-SOFT® (tefilcon) A soft bifocal contact lens for presbyopic patients Diameter 13.8 mm Base curves 8.3, 8.6, 8.9 (plus only) mm Center thickness .07 at -3.00 D, .12 at +3.00 D,

(varies with power) Powers -6.00 to +6.00 D (0.25 D steps) Adds +1.50, +2.00, +2.50, +3.00 Lens catalog and sales brochure available Price $48 per lens Performance warranty and manufacturer's warranty

Cibasoft® (tefilcon) Thin design, minus soft contact lenses Diameters 13.8 mm, 14.5 mm Base curves (mm) 8.3, 8.6, 8.9; 8.6, 8.9, 9.2 Center thickness (mm) .09 to .04 (varies with power) Powers (D) Plano to -10.00 D Price $16 per lens Manufacturer's warranty

Torisoft® (tefilcon) Unique "thin zone" design, for astigmatiC patients

Diameter (mm) 14.5 Base curves (mm) 8.6, 8.9, 9.2 Center thickness (mm) 0.95 at -3.00 D, 0.14 at +2.00

D (varies with power) Sphere powers (D) -6.00 to +4.00 Cylinder power (D) -1.00 & -1.75 Cylinder axes 0 to 180° in 10° increments. 8.6, 8.9

base curves. 180°,90° (±200) in 10° increments only for 9.2 base curve

Lens catalog available Price $43 per lens Performance and manufacturer's warranty

Narcissus Medical Foundation Cosmetic and Prosthetic Soft Contact Lenses Soft Contact Lenses

The Narcissus Medical Foundation, directed by LeRoy G. Meshel MD and Mr. Vernon Gregory, was formed for the purpose of developing and refining new optical devices among which are the prosthetic and cosmetic gel lenses. Our new process has made it possible to place any image in colors on any portion of any hydrophilic gel contact lens. The imagery is stable and nontoxic. Each lens is specifically designed and fabricated for the individual patient. This has been found to be the only effective way to obtain optimum cosmetic and visual results.

Our lenses have been successfully used by over 10,000 patients worldwide. The lens is used to dramatically improve the appearance and vision of eyes which have incurred corneal damage of various types as well as to reduce photophobic symptoms in such . pathological states as albinism, aniridia, and colobomatous eyes, both congenital and surgical. "Black-out" lenses have proved successful in the treatment of amblyopia, in patients with diplopia, and when used during minor surgery about the eyes.

These devices can now be obtained for medical purposes through the Foundation. Experience has shown that a better individual lens design and fitting can be accomplished if the patient is seen in San Francisco. In most cases, the appropriate lens can be fabricated from data obtained in one examination. If it is not possible for the patient to be seen in San Francisco, we will attempt to supply the proper device by mail. The following information must be included when requesting a lens: 1. Name of patient and diagnosis 2. A short clinical history and specific purpose for

the lens 3. Good Quality color photographs or slides of the

patient's full face, two eyes only, and each eye separately

4. Keratometry readings from the good eye and, when possible, from the damaged eye

5. Corneal diameter 6. Refractive error, if any 7. Pupillary size in millimeters of the good eye in

average room light 8. Results of trial lens fitting with any conventionally

236 OPHTHALMOLOGY • iNSTRUMENT AND BOOK SUPPLEMENT 1984

available soft contact lens (eg. Bausch & Lomb, Hydrocurve, American Hydron, Cooper)

9. Any other information ybu think is appropriate Research and development at the Foundation is funded

solely by the directors, appreciative patients, and friends. The demand for our lenses is increasing, and newer processe~ require more sophisticated equipment and increased personnel. To enable us to continue our work on these very important devices, we ask that a donation accompany each request for a lens.

Price: Donation requested of $175 per lens adjusted in accordance to patient's financial status

One-month warranty

Contact Lens Accessories

AO Reichert Instruments Contact Lens Center, #11705

List price $3315 One-year warranty

AO American Optical Corporation/Soft Contact Lens Business SEPTICON'· Catalytic Disinfection System

The SEPTICON System is a cold disinfection regimen that uses the oxidation method for disinfection of soft contact lenses. The system contains LENSEPT Disinfection Solution, SEPTICON Cups and the SEPTICON Catalytic Disc. The SEPTICON System is for use with all soft (hydrophilic) contact lenses.

Price on request. The SEPTICON'· Cups

The SEPTICON Cups that are included in the SEPTICON Catalytic Disinfection System are specially designed for use with the SEPTICON System. The cups include the SEPTICON lens holder which may be used in Cup #1 during the disinfection cycle and then Cup #2 during the rinsing cycle. Cup #2 contains the SEPTICON Catalytic Disc.

Price on request. The SEPTICON'· CatalytiC Disc

The SEPTICON Catalytic Disc is placed in the base of Cup #2 of the SEPTICON CatalytiC Disinfection System. The disc contains a coating of platinum which has a neutralizing effect on the remaining LENSEPT Solution on a pair of soft contact lenses. The disc must be replaced every three months or 100 cycles of the SEPTICON System.

Price on request. LENSEPT'· Disinfection Solution

LENSEPT Disinfection Solution is part of the SEPTICON Catalytic Disinfection System. It is used in Cup #1 of the SEPTICON System. One of its components is hydrogen peroxide, which is an oxidizing disinfection soiution.

Price on request.

BPI Brain Power Incorporated The Super Scrubber Product #75

(Optional 12-vial C. L. Rack, $69, Product #678) Most powerful Multi-phasic'· Ultrasonic Scrubber made; dual axes power projection ensures no standing waves for fastest, most thorough cleaning of contact lenses; large enough for instruments, etc. 115 v.

Price $495 The Personal Ultrasonic Scrubber Product #91

(Optional 2-vial C. L. Rack, $14.95-Product #660) Projects ultrasonic power in a 360 0 configuration because of its design; can be used with the optional C. L. Rack for personal contact lens care, or with a 600 ml beaker rack for larger items, such as frames and lenses. In 3 decorator colors; requires 115 volts.

Price $119 BPI® High-Power Scrubber'· (gallon), #184

Multi-phasiC'· action for random-sized bubbles for no standing waves

200 watts of true sonic power to cleaning solution Multi-frequency response Dual power selection, horizontal or vertical or both Available in two chassis styles; protectively coated

aluminum or all stainless steel and has gallon-sized stainless steel tank

CCS and UL approved; fuse protected Price $449 standard 115 volt Thirty-day money-back guarantee with one-year limited

warranty BPI® Half-Gallon Scrubber'·, #185

Features exclusive Multi-phasic'· multi-frequency ultrasonic power pulses for thorough cleaning

Dual axis cleaning Horizontal or vertical projection of ultrasonic waves or a

combination of both Perfect for instruments; 115 volt Price $279

BPI® 3 Tank Ultrasonic Scrubber'·, #186 Has three Scrubbers'· in one compact unit Exclusive BPI Multi-phasic'" action Variable frequency; dual-axis power selection CCS and UL listed components are fuse protected 18.5" wide, 10.5" front to back, 6" high Quart tanks are stainless steel For higher volume needs or varied chemical application Price $795 Thirty-day money-back guarantee; limited one-year

warranty BPI Multi-phasic'" Ultrasonic Scrubber'"

Cleans and polishes all contact lenses, even fragile extended-wear lenses; removes yellowing due to lipo­mucoprotein and calcium deposits without tearing. Polishes away minimal scratches from hard contacts

Outside dimensions: 8" W X 6" D X 6" H Tank dimensions: 3.5" X 6" X 4" D; quart capacity A unique ultrasonic system using exclusive Multi-

phasic'· power pulses giving a random-sized bubble with no standing waves; Dual power projection; can