CONCRETE BATCHING PLANTMB1200-MB1500-MB1800

Mobile

山东道姆机械设备有限公司Shandong Dom Machinery Equipment Co.,Ltd

Address: №78 Taidong road, Taian city, Shandong province, China. Тel: +86-538-6366679

1. Reduction GearboxThe gearbox unit, specially designed for a balanced distribution of power to the various mixing device, ensures a highefficiency and low-noise rotation.

2. Maintenance AccessLarge access facility is for easy maintenance and cleaning. The key-operated safety switch guarantees the motorcannot be powered with cover open.

3. Mixing DeviceSpecial designed mixing facility make the mixing faster and more homogeneous, no material heaped.

4. Hydraulic UnitHydraulic unit equipped with manual pump allows the door be opened in case of electric failure.

5. Mixing Locus DiagramsThis diagrams show the perfect mixing action of the DOM planetary mixer from 6 to 60 seconds after material is added.Note that the floor is completely swept by the mixing stars’ action every 4 revolutions (6 seconds) and that each zoneis covered at regular intervals in time.

TON

PLANETARY MIXER

山东道姆机械设备有限公司Shandong Dom Machinery Equipment Co.,Ltd

Address: №78 Taidong road, Taian city, Shandong province, China. Тel: +86-538-6366679

Control system

JNSIWEI1000 operating system with thermal printer Possibility of manual, semi-automatic and automatic operation and PC interface. No previous knowledge required and can be delivered with the language version desired. Stores 25 recipes. Dosing accuracy:+/-1-2%. All the electric element are “SCHNEIDER”

CE plug boxes The batching plants are equipped with CE plug boxes for connection of accessories and equipment,e.g.hand tools,cement silo and /or belt conveyor.

Addictive pump The material of Forced Self-primimg Pump is stainless steel.It is anti-corrosion effectively from the addictive. Turbine flowmeter accuracy ±0.5%

AP12 is designed for dealing with the high required water drainage. This kind of pump can put in narrow drain pit. The material of AP12 is stainless steel, so it do not need maintenance. Smaller granules whose diameter under 12mm can go through the screen. The screen can be removed to clean without any special tools. medium temperature The lowest medium temperature:0℃ The highest medium temperature, run continuously:50℃ Run continuously less than 2 minutes, interval more than 30 minutes, the highest medium temperature can reach 70℃。

Intelligent liquid turbine flowmeter is the use of turbine flow sensor of ultra low power single chip microprocessor technology advanced and show that the new intelligent instrument product integration, using double crystal field display, and has the advantages of compact mechanism, clear reading, high reliability, free from outside interference power, anti lightning, low cost advantages.

®

CONTROL SYSTEM

Water Pump

®

山东道姆机械设备有限公司Shandong Dom Machinery Equipment Co.,Ltd

Address: №78 Taidong road, Taian city, Shandong province, China. Тel: +86-538-6366679

Conveyor belt This conveyor belt has the advantages of simple structure,easy installation and convenient maintenance. It is folding.When transport,it do not need to be taken apart of the support roll,roller and belt . The discharging height can be adjusted as different height trucks. The conveyor belt runs reliable,easy to realize automation and centralized control.

GeneratorThe mobile generating sets include single shaft or twin shafts (two wheels or four wheels) with a 4 hour or 8 hour inner working fuel tank according to the customer requirements. It is equipped with damping spring, breaking system, water proof enclosure and visible operating control panel for easy operation and maintenance. It has two types: trailer type and truck self-loading type.

山东道姆机械设备有限公司Shandong Dom Machinery Equipment Co.,Ltd

Address: №78 Taidong road, Taian city, Shandong province, China. Тel: +86-538-6366679

Screw conveyor The ouside pipes of the machine is cut by five-axis CNC curve cutting machine.Outside pipes,inside pipes a nd feeding pipes are all welded by CNC automatic welding machine to make sure of the coaxiality and weild ing quality . Reducer is hard tooth surface gear heavy type.It has high strength,large torque,low nosie and long working li fe. The blade is one -time molded. It is designed as double-twist to prevent blockage. The motor brand is Siemens. It is standard type and easy to transport.

Horizontal hopper in fully welded construction. Complete silo system assembled on a common flat rack hook container. Alternatively the silo can be delivered mounted on a bogie trailer or a flat rack trailer. Designed for easy flowing materials such as Portland cement with a bulk density of 1.13 tonnes/M³ .

The cement silo is delivered complete with cement discharge, screw conveyor for transport of cement at the bottom of the silo, cement injection, grids for cement inlet, cutters for big bags, top hatches, electric external motovibrators, self- cleaning dust filter, standard silo equipment (see list below), lifting devices for easy transportation and control unit.

®

Product model Concrete mixing plant - MOBILE version (Wheeled)Principle for design and production Standard: concrete mixing plant:

GB10171-2005 concrete mixer: GB/T9142-2000Working Environment 1. working environment 10C~400C;

2. relative humidity no more than 90%;3. maximum snow load 800Pa;4. maximum wind load 700Pa;5. working height no more than 2000m

Applicable material Stones, grit, water, addictive, cementMaterial requirement Maximum diameter of aggregate≤40mm

• Fine aggregate• Grit-natual sand, artificial sand• Water: clean water• Admixture: a. water-reducer b. air-entraining admixture• Pumping aid• Retarder, accelerating agent, early-strength admixture water-

proofing agent, rust inhibitor, expander , antifreeze

Production capacity MB-1200, 10-16m3/h - MB1500 17-25m3/h - MB1800, 28-32m3/hDischarging (m) 1 metreElectric Power 28.5 kw (without the screw conveyor)The total weight 7 ton (without the cement silo and screw conveyor)Foot print area L x W 5.8m x 2.3 metreThe mixing system Model number Motor power Charging

capability The discharging capability

MP500 18.5kw 750L 500LThe aggregate batching and weighing system

The aggregate hopper volume

The power of the electric drum

The measuring accuracy

2.4m3 × 2 3kw x 2 ±2%Cement weighing system Weighing The weighing hopper

dimensionThe weighing accuracy

Cumulative measurement

0 - 150 kg ≤±1%

Water weighing system Water weighing The motor power of the water supply pump

The weighing accuracy

Turbine flow meter

0.75kw ≤±1%

Weighing system Admixture weighing

The mixing addictive pump power

The weighing accuracy

Turbine flow meter

0.75kw ≤±1%