Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
INSTANT TOOL HIRE FOR ALL INDUSTRY – www.cwplant.co.uk100100
Hire Depots - Nationwide - www.cwplant.co.uk
Hire Depots - Nationwide - www.cwplant.co.uk
LIGHT DUTY PLATE COMPACTOR
For use in narrow areas,whether compacting sand,gravel or bedding in paving.
CODE No. WEEK
120101 95.00
A powerful all rounder particularly suitable for use in earthworks,asphalt laying, paving and anywhere where the working conditions are too confined for other compaction equipment.
CODE No. WEEK
120102 99.00
Engine/Fuel Petrol Compaction Force 12kN Plate Width 350mm/14" Weight 60kg
Engine/Fuel Petrol Compaction Force 10kN Plate Width 330mm/13" Weight 54kg
HEAVY DUTY PLATE COMPACTOR
MEDIUM DUTY PLATE COMPACTOR
This highly manoeuvrable plate makes it ideal for the compaction of larger areas.
CODE No. WEEK
Technical Data
120103 102.00
Engine/Fuel Petrol Compaction Force 18kN Plate Width 450mm/18" Weight 91kg
Forward/Reverse PLATE COMPACTOR
These highly manoeuvrable reversible plates make compactionin confined areas such as trenches more manageable.
CODE No. WEEK
Technical Data
Technical DataTechnical Data
120104 240.00
Engine/Fuel Diesel Compaction Force 24kN Plate Width 380/500mm Weight 130/135kg
The Highways Authorities Utilities Committee (HAUC) states that compaction equipment used in the re-instatement of highwayopenings must meet certain specifications. All products highlighted as HAUC approved meet the latest requirements as laid outin the New Roads and Street Works Act 1991 (revised June 2002)
m/s2m/s24.7
m/s2m/s24.5
m/s2m/s24.0
m/s2m/s23.2
db(a)db(a)96.7
db(a)db(a)100
db(a)db(a)105
db(a)db(a)99.9
COMPACTIONCOMPACTION
15"/20"
INSTANT TOOL HIRE FOR ALL INDUSTRY – www.cwplant.co.uk 101
INSTANT TO
OL HIRE FOR ALL INDUSTR
Y – www.cwplant.co.uk Telephone your nearest Hire Depot
COMPA
CTION
101
UPRIGHT RAMMERS
HEAVY REVERSIBLE PLATE
This trench rammer is ideally suited for compaction in trenchesand pipelines, for back-filling and foundations and forasphalt repairs.
Larger plate widths available.Please ask for details.
CODE No. WEEK
Technical Data
120201 155.00
Engine/Fuel Petrol Compaction Force 13.5kN Plate Width 280mm/11" Weight 62kg
m/s2m/s29.3
m/s2m/s23.5
The excellent handling allows compaction work in confinedtrenches as well as on large surface areas.
Engine/Fuel Diesel Compaction Force 47kN Plate Width 750mm/30" Weight 397kg
db(a)db(a)100
db(a)db(a)98
Technical Data
CODE No. 120105 POA
Engine/Fuel Diesel Compaction Force 60kN Plate Width 950mm/37" Weight 550kg
The Health & Safety at Work Act 1974places a duty on the employer to
provide… “such information, instruction,training and supervision as is necessary
to ensure, so far as is reasonably practicable, the Health & Safety at work
of his/her employees.”
The provision and use of work equipmentregulations 1998 (PUWER 98) also statesthat “every employer shall ensure that allpersons who use work equipment have
received adequate training for purposes ofHealth & Safety, including training in themethods which may be adopted whenusing the work equipment, any risks
which such use may entail and precautions to be taken.”
INSTANT TOOL HIRE FOR ALL INDUSTRY – www.cwplant.co.uk102102
Hire Depots - Nationwide - www.cwplant.co.uk
Hire Depots - Nationwide - www.cwplant.co.uk
CONCRETE PREPARATIONCONCRETE PREPARATION
CODE No WEEK CODE No MINIMUM WEEK
130103 Diesel 130.00
Engine Electric StartFuel DieselWeight 485kg
Voltage: 110vWeight: 303.5kgEngine Power: 2 / 1.5 (Hp / kW)
MORTAR & GROUT PUMP
db(a)db(a)104
4/3 CONCRETE MIXERS 5/3.5 MIXER 100XT ELECTRIC
The rotating, tilting stand of this mixer enablesyou to mix up to 85 litres of concrete or mortarand tip it straight in to a wheelbarrow. Fits through standard door openings.
This standard site mixer is ideal for thesupply of one brick layer or a plasterersquad.
This site mixer has a robust chassis andheavy duty wheels designed to withstandand operate in the worst site conditions.
The ACF405 peristaltic electric pumphas a metal hopper, variable speedoutput that can pump up to 5 ltr/min.Pointing machines work best pumpingpre-bagged mortars and grouts thathave been produced for mechanicalapplication. Mortars mixed on siteusing sharp builders sand are not suitable for pump application.The peristaltic pump is a positive displacement pump and used forpumping a variety of flowable mortarsand grouts. The material is drawndown from the hopper into a roller andtube mechanism. This compresses theflexible tube, forcing the material outtowards the gun.The 110v peristaltic pump will run offa 13amp supply and 3kva transformer.
PERISTALTIC PUMP• Hopper feed roller & tube pump• For refurbishment & repair trades• Heritage & conservation• Bridge & stone reinstatements• Waterproofing & brick pointing
✓ For pumping, pointing & injecting✓ Pre-bagged mortars & pointing
materials✓ Grouts & fillers✓ Pre-bagged lime mortars✗ Resin injection
Power 0.5kwMachine weight 42kgSize WxL 45x50cmHeight 55cmHopper tank 25 ltrPump output 2-5 ltr/minNoise level 59dBAVoltage 110v or 230v
CODE No. WEEK
130101 Petrol 50.00130102 Electric 45.00
130104 Electric POA
Voltage 240/110vPower Rating 630wWeight (E) 57kg Engine Re-coil startFuel Unleaded PetrolWeight (P) 57-59.5kg Technical Data
TEST CUBE MOULD
CODE No. SIZE WEEK
130110 4"/100mm 23.00
130110 6"/150mm 26.00
For casting accurate concrete cubesready for testing.
CODE No. WEEK
130107 60.00
To assist in the quality and quick setting of concrete samples.
Measures the workability andconsistency of fresh concrete.
CURING TANK
CODE No. WEEK
CODE No. 130109 MINIMUM WEEK POA
130108 20.00
SLUMP CONE & BAR
FOR OUR
RANGE OF
CONCRETE SKIPS,
PLEASE SEE
PAGE 16-17
FOR OUR
RANGE OF
CONCRETE SKIPS,
PLEASE SEE
PAGE 16-17db(a)db(a)107
db(a)db(a)87
CLEANING CHARGE APPLIES. It is vital that the equipment in this section iscleaned on site immediately after use.
GUN
HOSE
NOZZLES
db(a)db(a)59
INSTANT TOOL HIRE FOR ALL INDUSTRY – www.cwplant.co.uk 103
INSTANT TO
OL HIRE FOR ALL INDUSTR
Y – www.cwplant.co.uk Telephone your nearest Hire Depot
CONCR
ETE PR
EPAR
ATION
103
ELECTRIC POKER VIBRATOR PETROL POKER VIBRATOR
An electric poker system comprising of interchangeable drives,flexible shafts and poker heads. Giving portable performance,ideal for small volumes of concrete.
CODE No. WEEK
Technical Data
130201 125.00
Voltage 240/110v Shaft Length 3m Power Rating 1.6kw Head Size 38mm/1.5"Weight 11.7kg
Voltage 110v Vibration head length 400mm/15.75"Effective compaction up to 85cm Vibration head weight 5.8kgVibration head diameter 35mm/57mm Total operating weight 19.8kg
1.3"/2.25"
HIGH FREQUENCY POKER
Designed for high performance these pokers have vibrationmotors fitted in the actual head of the poker giving moreconsistent compaction results.
CODE No. WEEK
Technical Data
Technical Data
130203 270.00
The fast and effective way to compact deep wet concrete usedin foundation and form work.
CODE No. WEEK
Technical Data
130202 130.00
Engine 4 stroke-recoil start Shaft length 6m Fuel Unleaded Petrol Weight 29kg
EXTERNAL SHUTTERING VIBRATOR
Clamped onto the shuttering they vibrate the shuttering togive an excellent finish to concrete.
CODE No. WEEK
130204 75.00
Weight 9.6kgAir Consumption 1170 L.p.m.
Amplitude 1.2mmFrequency 13000 V.p.m.
WHAT POKER SIZE25mm/1": in-situ poured walls
38mm/1.5": columns50mm/2": slabs
65mm/2.5" - 100mm/4": foundationsConcrete should always bevibrated for the best results.
Power trowelling to a finish is best achieved whenthe concrete is hard enough to walk on.
CLEANING CHARGE APPLIES. It is vital that the equipmentin this section is cleaned on site immediately after use.
m/s2m/s24.0
m/s2m/s219.1
m/s2m/s21.45
db(a)db(a)79
db(a)db(a)119
db(a)db(a)90
m/s2m/s213.0
db(a)db(a)100
INSTANT TOOL HIRE FOR ALL INDUSTRY – www.cwplant.co.uk104104
Hire Depots - Nationwide - www.cwplant.co.uk
Hire Depots - Nationwide - www.cwplant.co.uk
HANDHELD CONCRETE PLANER
MANUAL RE-BAR BENDER
Suitable for finishing steps and lintels or wherever a smoothfinish is required on stonework or masonry. Removes 2.5mmmaximum of materials per pass.
CODE No. WEEK
Technical Data
130401 165.00
Voltage 110vPower Rating 1020w
Disc Size 4.33"/110mmWeight 4.3kg
PORTABLE RE-BAR BENDER/CUTTER
A versatile electric tool that can cut and bend rebar up to 16mmdiameter. Bend angles are set by a simple dial mechanism witha slip clutch preventing machine overload. A totally siteportable machine which has evolved to reduce operator fatigue.
Bar bending machine capacities20mm mild steel / 16mm hightensile.
CODE No. WEEK
Technical Data
130301 160.00
CODE No. Minimum WEEK
130303 84.00
Voltage 110vPower Rating 510w
Cutting Capacity 10-16mmWeight 17kg
RE-BAR TIER
Simple to operate, light weight re-bar tying machine fast andeconomical, saves time and money. For use on precast concrete products.
CODE No. WEEK
Technical Data
130302 160.00130302 Larger 250.00CPR-RTIERL comes with battery and charger.
Voltage 9.6vRe-Bar Size Capacity 20 - 39mmTying Speed 1 per second
Ties per coil 120Wire Gauge 0.8mmWeight 2.1kg
No strain on wristor forearms,helps prevent
RSI (Repetitive Strain
Injuries)
m/s2m/s22.5
db(a)db(a)80
m/s2m/s22.5
db(a)db(a)88
m/s2m/s22.5
db(a)db(a)103
DISC - SALE ITEM ONLY
HANDHELD DIAMOND GRINDER DG150
Equipped with a diamond surface grinding disc, this machine isdesigned for the removal of laitance marks, shuttering seamsand general irregularities in concrete.Advantages: • Up to 10 times longer life than conventional angle grinders• No more changing carbon brushes• Perfectly matched to Hilti cup wheels for maximum productivity• For incredibly quick grinding of concrete or removal of coatings from concrete
Applications: • For surface grinding on concrete, screed, removing tile adhesives• Removing coatings (paint, adhesive remains etc.) from concrete
DIAMOND DISC - SALE ITEM ONLY
CODE No. WEEK
Technical Data for Grinder
130402 Diamond Grinder 112.00
280401 Vacuum 88.00
Voltage 110vPower 1760wWheel diameter 150mm
Operating weight 4.1 kgMax speed 66000 rpmWeight 4.1kg
m/s2m/s25.8
db(a)db(a)88
FORTECHNICALDETAILS SEE
PAGE 177
FORTECHNICALDETAILS SEE
PAGE 177
VACUUM
Wear charge applies