Upload
others
View
15
Download
0
Embed Size (px)
Citation preview
DATA CENTRE HANDBOOK
DAT
A C
EN
TRE
DTC
TRIMO HANDBOOK TRIMO HANDBOOK2 3
DTC
DTC
P05 TRIMO APPROACH
CONTENT
CONTENT
P06 INSPIRATION
P12 DATA CENTRE PRODUCT PORTFOLIO
P14 DATA CENTRE BENEFITS
P16 DATA CENTRE PRODUCT SOLUTION
P28 DATA CENTRE DETAIL SOLUTION
P40 DATA CENTRE TOOLS
DTC
TRIMO DRESS CODE IS UNIQUE ARCHITECTURE
© Simon Kennedy
P42 DATA CENTRE HELP SERVICE
P43 THE VALUE PROPOSITION
P41 DOWNLOADS
TRIMO HANDBOOK / TRIMO APPROACH TRIMO APPROACH / TRIMO HANDBOOK
DTC
4 5
We are aware of customers’ needs related to data centres:
• EXCELLENT MECHANICAL ENGINEERING INFRASTRUCTURE Heating, ventilation and air condition (HVAC)
• HIGH AVAILABILITY (HA) DATA CENTRES Tier 1, Tier 2, Tier 3 and Tier 4
• FLEXIBILITY AND MODULARITY Possibility to extend or renovate the existing data centre.
• PASSIVE AND ACTIVE FIRE PROTECTION
• GREEN DATA CENTRE Make as small environmental impact as possible
• RAISED FLOOR Helps cooling the building by extending air circulation.
• HUMIDITY PREVENTION Equipment in data centres are humidity sensitive
TRIMOAPPROACHIn life, change is the only constant. Everything is in motion but our goal remains the same – to develop the world’s most trusted and highest performing Trimo products and to be ourcustomers’firstchoice.Asyoudesignuniquearchitecture,wecreate thehighestperformingproducts to our customized formulawhilst tailoringdetails specifically toyour needs.
Withover50yearsofexperienceandasthefirstproducerin the world since 1987 of panels with incombustible mineral wool core, Trimo provides smart, innovative solutions that benefit people, organizations, and theenvironment.
Our ambition is to grand our customers with quality metal wall system for data centres and to offer roof, internal walls and ceilings from a single-source package. Special attention is given to simple and rapid installation solutions made with high recyclable products.
Trimo architectural solutions for the complete envelope of data centres, use tested and accredited Qbiss One metal wall system that seamlessly integrate with the modular grid construction typical for data centre. Comprehensive technical support delivers valuable design solutions, that will keep the equipment from data centres safe from humidity since no sweating or condensation within the rooms will occur. Products can also meet the food safe requirements.
TRIMOAPPROACH
Hint!
Click here for Trimo renovation handbook and discover a unique architectural solution tailored
to you.
TRIMO HANDBOOK / INSPIRATION INSPIRATION / TRIMO HANDBOOK6 7
DTC01
EQUINIX
The facility that uses Qbiss One elements is third on the London Slough campus, the heart of Europe’s largest financialmarket.
DTC
INSPIRATIONDare to explore and be inspired by the data centre’s unique architecture entrusted to Trimo.
INSPIRATION
TRIMO HANDBOOK / INSPIRATION © Simon Kennedy
6
TRIMO HANDBOOK / INSPIRATION INSPIRATION / TRIMO HANDBOOK8 9
DTC
INSPIRATION
Equinix is an American multinational company that specializes in internet connection and data centres. The LD6 Equinix International Business Exchange™ (IBX) is a flagship facility built to meet escalating demand forservices in the region. The facility that uses Qbiss One elements is third on the London Slough campus, the heartofEurope’slargestfinancialmarket.LD6hasdirectconnectivity to the London Internet Exchange (LINX), one of the world’s largest Internet Exchanges.
BUILDING SEGMENT: DATA CENTRE
INVESTOR: EQUINIX
LOCATION: UK, LONDON
PRODUCT: QBISS ONE
INSPIRATION
02The building uses 10.703 m2, 120 mm thick Qbiss One elements of which 295 pcs. of prefabricated Qbiss One corner elements were installed.
04
03
Flawless integration of air vents mesh and Qbiss One system.
Equinix LD6 building received LEED Gold accreditation.
© Simon Kennedy © Simon Kennedy
© Simon Kennedy
TRIMO HANDBOOK / INSPIRATION INSPIRATION / TRIMO HANDBOOK10 11
DTC05
QBISS ONE FACADE SYSTEM EXAMPLE
To ensure permanent quality, Qbiss One elements are prefabricated and cut to size in controlled environment.
DTC
TRIMO HANDBOOK / INSPIRATION 10
TRIMO HANDBOOK / PRODUCT PORTFOLIO PRODUCT PORTFOLIO / TRIMO HANDBOOK
DTC
12 13
DATA CENTREPRODUCT PORTFOLIOOver the years, our product portfolio grew and developed in tune with market requirements. Trimo is known as a market leader in its sector and a trendsetter company as proven by numerous international awards for innovation and cooperation on projects which have received the most respected prestigious architectural awards: RED DOT AWARD,
GOLDEN KIWI AWARD, BIO 20, MIPIM, EFQM.
DATA CENTREPRODUCT PORTFOLIO
QBISS QBISS SCREEN
DATA
CEN
TRE
TRIMOTERM MODULAR UNITS
Data centre product solution
Horizontal facadeQbiss One
Internal wallTrimoterm FTV
Flat ceilingQbiss One
Flat roofTrimoterm FTV
TRIMO HANDBOOK / BENEFITS BENEFITS / TRIMO HANDBOOK14 15
DTC
FEATURES ADVANTAGES BENEFITS
TOTAL WALL SOLUTION Tailor made elements, corner elements, curved elements,trapezoidal elements Save time & money by choosing only one supplier
SELF SUPPORTING Elements up to 6,5 m long Reduced amount of substructure
PREFABRICATED Regular quality control, ready to install,produced in controlledenvironment, permanent quality Reduced costs, reduced construction time, reduced quality risk
MINERAL WOOL INSULATION Highleveloffireresistance,non-combustibility Ultimatefiresafety,reducedinsurancepremiums,productforhigher buildings (A2)
EMBOSSED CORNERS No cuts, no welded edges, no leakage and corrosion Ultimate aesthetics and long-run performance
WATER & AIR TIGHTNESS Low air change rates, safe equipment Superb workplace climate
TAILORED PROJECT SOLUTIONS Design experts, technical support, in-house knowledge,50+ years of experiences Optimal cost solution, passion, creativity
BIM LIBRARIES Free ARCHICAD and Revit BIM libraries Smoothcollaboration,reducederrorsandconflicts,bettercostcontrol and predictability, project visualisations
BURGLARY RESISTANCE Class RC3 of Burglary resistance Safety of personnel and equipment in the building
FLEXIBLE WARRANTIES Robust, durable andhigh quality coatings
Easy & low-cost maintenance, 10-30 years warrantyagainst corrosion
98% RECYCLABLE Environmentally friendly material High sustainability and eco-friendliness
EXTREME THERMAL VALUES Highenergyefficiency Reduced HVAC costs
MOISTURE RESISTANT No moisture on the surface of internal walls No damage to expensive machinery
DATA CENTRE QBISS ONE BENEFITSThe added value of the product is reflected in the benefits for the user. The stars ofarchitecture such as Fosters and Partners, recipient of the Trimo Architectural Award, trustthesuperiorqualityofTrimoproductsandtheflexibilityofTrimoservice.
DATA CENTRE QBISS ONE BENEFITS
TRIMO HANDBOOK 17
DTC
DTC
16 TRIMO HANDBOOK / PRODUCT SOLUTION
DATA CENTREPRODUCT SOLUTION
We take intoaccount thespecificsof data centresandconstantly improveand inventproducts that fulfill all demands. Data centre installation and data centre product
formula steps explain pragmatically how to define and develop optimal products forcomplete envelope system.
FACADE SYSTEM
Facade system protects the building fromfire,noise,weatherandheat.
CEILINGS
Ceiling elements prevent seeing a mechanical installation and enable light integration within the element.
INTERNAL WALL SYSTEM
Internal wall system separates rooms within the building.
SPANS
Qbiss One elements are installed as a singlespansystem,fixedoneachsideof the element. When installation is complete,fixingscrewsarenotvisible.
INSTALLATION DIRECTIONS
The installation direction defines thedirection of the transversal and the longitudinal joint of the element.
DATA CENTREPRODUCT SOLUTION
DATA CENTRE INSTALLATION GUIDE GIVES RECOMMENDATIONS AND SOLUTIONS
DATA CENTRE QBISS ONE PRODUCT FORMULA
ROOF SYSTEM
The roof system defines the uppercoveringofabuildinginaflatorpitchedinstallation.
DTC
PRODUCT SOLUTION / TRIMO HANDBOOK
18 19
DTC
TRIMO HANDBOOK / PRODUCT SOLUTION PRODUCT SOLUTION / TRIMO HANDBOOK
01. STEP
DATA CENTREINSTALLATION
DATA CENTREPRODUCT SOLUTION
DATA CENTREPRODUCT SOLUTION
INTERNAL WALL SYSTEM
Internal walls in data centres divide rooms with expensive machinery. Keeping the equipmentsafefromfireisanecessity.
RECOMMENDATIONMain steel structure
SOLUTIONHorizontal/vertical installation of fireresistant Trimoterm mineral wool sandwich panel (up to EI240)
Request service >
FACADE SYSTEM
Qbiss One elements are installed as a single span system, directly to main steel structure. Comprehensive Trimo’s technical support instruct the optimal length of the elements and provide structural calculation with predefined fixing elements. Designdepartment prepares design shop drawings and use optimal product dimensions to fulfillthebuilding’stechnicalspecifications.InstallationofentirelydefinedanddesignedQbiss One is seamless and fast.
RECOMMENDATIONMain steel structure with about 4 m span between columns
SOLUTIONHorizontal, 4 m long prefabricated fireresistant elements (EI120) and accessories CEILING SYSTEM
Harmonious integration of lights into a Qbiss One ceiling completes the whole envelope of the building with no possibility of sweating or condensation within the rooms.
RECOMMENDATIONSteel structure
SOLUTIONQbiss Screen / Qbiss One ceiling
Request service >
02. STEP
DATA CENTREPRODUCTFORMULARational planning and the right choice of products tailored to data centres will drastically reduce the cost of investment. Qbiss One products specially developed for thespecificsofdatacentresofferexcellentsolution forcomplete data center envelope system.
Rich selection of Qbiss One color options will seamlessly integrate data centre into urban structures. To prolong a lifetime of the building, only the best (PVDF 35 or PUR/PA) anticorrosion protection is being used on the atmospherically most exposed areas of the facade which results into a longer anti corrosion warranty period.
• On stock colours• Anticorrosion protection: PVDF 35, PUR/PA
INTERNAL COATINGSP, HDP, PUR, PUR/PA, PVDF, PVC(P), PVC(F), PET(F)
EXTERNAL COATINGPVDF, PUR/PA, Stainless steel
FLAT ROOF SYSTEM
The system enables the application of a green roof layer on top of the elements.
RECOMMENDATIONSteel structure with 3 m spacing between the load bearing elements
SOLUTIONFlat roof with 12 m multi span
20 21
DTC
TRIMO HANDBOOK / PRODUCT SOLUTION PRODUCT SOLUTION / TRIMO HANDBOOK
I. FORMULA
HORIZONTALFACADE SYSTEM,QBISS ONEPRODUCT
DATA CENTREPRODUCT SOLUTION
DATA CENTREPRODUCT SOLUTION
Qbiss One is a world-class engineered, prefabricated, A1 mineral wool-insulated, metal façade system that offers a thorough wall solution within a single piece of construction element. Façade elements with rounded corners, unmatchable flatness and advanced technicalcharacteristics place Qbiss One among the best façade systems in the world. The system is RC3 burglary resistant,certifiedasclassAforwaterpermeability,classA2fireresistantandreaches30dBofsoundinsulation.
Product QBISS ONE
Colour range Bright, medium, dark
Unit dimension
T (mm) 150
M (mm) 1000
R (mm) 4000
External steel sheetThickness t (mm) 0.7
Profile Gladio (G)
Internal steel sheetThickness t (mm) 0.6
Profile Gladio (G)
Features
Mineral Wool core (EN 14509) Power T
Weight (kg/m2) 24.7
Reaction to fire A2-s1, d0
Fire resistance (i→o) EI120
Thermal transmittance U (W/m2K) 0.25
Airborne sound insulation Rw(C:Ctr) (dB) 30 (-1;-3)
Water permeability (EN 14509) class A (1200Pa)
Air permeability (EN 14509) n=0.97: C=0.0046
Burglary resistance class (EN 1627) RC3
Certificates CE, LPCB, FM
Hint!
We know how to develop and optimize product formula for your unique architecture at your
location. Contact us by e-mail or phone:
[email protected] +386 (0)7 34 60 200
22 23
DTC
TRIMO HANDBOOK / PRODUCT SOLUTION PRODUCT SOLUTION / TRIMO HANDBOOK
Product TRIMOTERM FTV
Colour range Bright, medium, dark
Unit dimension
T (mm) 120
M (mm) 1200
R (mm) 8800
External steel sheetThickness t (mm) 0.6
Profile Gladio (G)
Internal steel sheetThickness t (mm) 0.6
Profile Gladio (G)
Features
Mineral Wool core (EN 14509) Power T
Weight (kg/m2) 19.8
Fire resistance (o→i, i→o) EI60
Reaction to fire A2-s1, d0
Thermal transmittance U (W/m2K) 0.31
Airborne sound insulation Rw(C:Ctr) (dB) 30 (-1;-3)
Water permeability (EN 14509) class A (1200Pa)
Air permeability (EN 14509) n=1.5: C=0.00005
Burglary resistance class RC3
Certificates CE, LPCB, FM
II. FORMULA
VERTICAL SINGLE SPANINTERNAL WALL SYSTEM,TRIMOTERM FTVPRODUCT
24 25
DTC
TRIMO HANDBOOK / PRODUCT SOLUTION PRODUCT SOLUTION / TRIMO HANDBOOK
III. FORMULA
FLAT SINGLE SPAN CEILING SYSTEM,QBISS ONEPRODUCT
Qbiss One ceiling elements enable easy cut-out for recessed light installation. Because of its light weight, the installation is easy, fast and requires only 2 persons.
Product QBISS ONE
Colour range Bright, medium, dark
Unit dimension
T (mm) 120
M (mm) 1000
R (mm) 4000
External steel sheetThickness t (mm) 0.7
Profile Gladio (G)
Internal steel sheetThickness t (mm) 0.6
Profile Standard (S)
Features
Mineral Wool core (EN 14509) Power T
Weight (kg/m2) 22.0
Reaction to fire A2-s1, d0
Fire resistance /
Thermal transmittance U (W/m2K) 0.31
Airborne sound insulation Rw(C:Ctr) (dB) 30 (-1;-3)
Air permeability (EN 14509) n=1.5: C=0.00005
Certificates CE, FM
0.40.4
5050
26 27
DTC
TRIMO HANDBOOK / PRODUCT SOLUTION PRODUCT SOLUTION / TRIMO HANDBOOK
IV. FORMULA
FLAT MULTI SPANROOF SYSTEM,TRIMOTERM FTVPRODUCT
Product TRIMOTERM FTV
Colour range Bright, medium, dark
Unit dimension
T (mm) 200
M (mm) 1200
R (mm) 12000
External steel sheetThickness t (mm) 0.7
Profile Microline (M)
Internal steel sheetThickness t (mm) 0.6
Profile Microline (M2)
Features
Mineral Wool core (EN 14509) Power S
Weight (kg/m2) 34.2
Reaction to fire A2-s1, d0
External fire performance (EN 13501-5) Broof (t1, t2, t3)
Thermal transmittance U (W/m2K) 0.21
Airborne sound insulation Rw(C:Ctr) (dB) 32 (-1;-2)
Water permeability (EN 14509) class A (1200Pa)
Air permeability (EN 14509) n=1.5: C=0.00005
Burglary resistance class RC3
Certificates CE
0.4
0.4
7.5 7.5 15
15
201.0
10 10
28 29
DTC
TRIMO HANDBOOK / DETAIL SOLUTION DETAIL SOLUTION / TRIMO HANDBOOK
DATA CENTREDETAIL SOLUTION
DATA CENTREDETAIL SOLUTION
LONGITUDINAL JOINT
I. FORMULA
HORIZONTALFACADE SYSTEM,QBISS ONEPRODUCT
Trimo Group holds full copyrights on the information and details provided on this media,therefore any unauthorized reproduction and distribution is strictly prohibited.PARAPET
QO-H-03.01DETAIL:
DETAIL VIEWVERTICAL CUT
Trimo Group holds full copyrights on the information and details provided on this media,therefore any unauthorized reproduction and distribution is strictly prohibited.PARAPET
VER
SIO
N: I
18.
07.
201
9 I
QO-H-03.01DETAIL:
1
POS.
2
3
4
5
ELEMENTSParapet cap support profile
SCALE: M 1:4
EPDM membraneEPDM membrane glue
Fixing screw
Parapet cap
NOTE
· The detail is suitable for substructure within ± 2 mm tolerance.· Adjustable substructure to be used when tolerances are out of range.
6 Fixing screw
7 Sealing tape · The sealing is performed by finishing joint elements in the transversal joint.Parapet detail finish is done using an parapet wall cap.·
B - B
BF - B
External FacadeINSTALLATION
F - BF
External Facade External Soffit
Internal WallB - BF F - B
External SoffitInternal Ceiling
JOINT TYPE
B - B
F - BF
BF - BF
QBISS ONEBUILDING APPLICATIONJOINT TYPE
BF - BFInternal CeilingF - B
HORIZONTAL
QBISS ONEInternal Wall
BUILDING APPLICATION
B - BF
BF - B
HORIZONTALINSTALLATION
VER
SIO
N: I
18.
07.
201
9 I
25 58
44
Trimo Group holds full copyrights on the information and details provided on this media,therefore any unauthorized reproduction and distribution is strictly prohibited.WINDOW
QO-H-06.01DETAIL:
DETAIL VIEWHORIZONTAL CUT VERTICAL CUT
Trimo Group holds full copyrights on the information and details provided on this media,therefore any unauthorized reproduction and distribution is strictly prohibited.WINDOW
VER
SIO
N: I
18.
07.
201
9 I
QO-H-06.01DETAIL:
1
POS.
2
3
4
5
ELEMENTSSupport frame
SCALE: M 1:4
Cladding element holder
Insulation - MW
Mastic sealant
Insulation foam
· Direction of installation needs to be specified.· The detail is suitable for substructure within ± 2 mm tolerance.
6 Sealing tape
7 Sealing tape rounded
8 Fixing screw
9 Sealing tape
· Seals and sashes are available at an aditional cost. Glazing seals
10 Butyl tape on the aluminium foil
11 Window frame - cross joint - HF21
12 Window frame - upper - HF16
13 Window frame - bottom - HF17
14 Outer glass fixing element - HF22
15 Fixing screw
16 Fixing screw
17 Fixing pad element
· When window frame is longer than 6,5m a dilatation element is
NOTE
· The detail does not include window sash and associated seals.
necessary.
are in domain of the glass supplier.
· Window detail can be finished quickly and repeatably. Details must respect simultaneous installation of the window and façadeelements. Windows can be delivered to the site assembled or disassembled.
F - BF
INSTALLATIONJOINT TYPE
QBISS ONEBF - BF
HORIZONTAL BUILDING APPLICATION
Internal Wall
B - BExternal Facade
B - BF
BF - B
F - B
F - BF
BUILDING APPLICATION
Internal Wall
External SoffitB - B
BF - B
F - B
External SoffitExternal FacadeInternal Ceiling
INSTALLATIONInternal Ceiling
JOINT TYPE
B - BF
BF - BF
QBISS ONEHORIZONTAL
VER
SIO
N: I
18.
07.
201
9 I
16 3 11
4 7 5 6
9 1715 14
81
BASE
QO-H-02.01DETAIL:
DETAIL VIEWVERTICAL CUT
Trimo Group holds full copyrights on the information and details provided on this media,therefore any unauthorized reproduction and distribution is strictly prohibited.BASE
VER
SIO
N: I
18.
07.
201
9 I
QO-H-02.01DETAIL:
Trimo Group holds full copyrights on the information and details provided on this media,therefore any unauthorized reproduction and distribution is strictly prohibited.
1
POS.
2
3
4
5
ELEMENTSCladding element holder L profile
SCALE: M 1:4
Element bearersDrip flashing
Sealing tape
Anchor bolt
NOTE
· The detail is suitable for substructure within ± 2 mm tolerance.· Adjustable substructure to be used when tolerances are out of range.
6 Bulb tite rivet
7 Drip element
8 Sealing tape EPDM
9 Drip flashing· Base sytem detail EPDM drip flashing component prevents the entry of rain water and drains any eventual water from the joint.
Transversal joint serves as a drainage channel.
HORIZONTAL
QBISS ONEInternal Wall
B - B
F - B
External Facade
Internal Wall
BF - BFInternal Ceiling
JOINT TYPEBUILDING APPLICATION
BF - B F - BF
F - B
JOINT TYPE
INSTALLATIONExternal Soffit
F - BFBF - BQBISS ONEINSTALLATION
BUILDING APPLICATION
B - B External Soffit
B - BFInternal CeilingExternal Facade
B - BF
BF - BFHORIZONTAL
VER
SIO
N: I
18.
07.
201
9 I
FIRE RESISTANT FACADE OPTIONVERTICAL CUT
PARAPET QO-H-03.01WINDOW QO-H-06.01BASE QO-H-02.01
QO-H-03.01
QO-H-06.01
QO-H-02.01
25 58
44
Trimo Group holds full copyrights on the information and details provided on this media,therefore any unauthorized reproduction and distribution is strictly prohibited.WINDOW
QO-H-06.01DETAIL:
DETAIL VIEWHORIZONTAL CUT VERTICAL CUT
Trimo Group holds full copyrights on the information and details provided on this media,therefore any unauthorized reproduction and distribution is strictly prohibited.WINDOW
VER
SIO
N: I
18.
07.
201
9 I
QO-H-06.01DETAIL:
1
POS.
2
3
4
5
ELEMENTSSupport frame
SCALE: M 1:4
Cladding element holder
Insulation - MW
Mastic sealant
Insulation foam
· Direction of installation needs to be specified.· The detail is suitable for substructure within ± 2 mm tolerance.
6 Sealing tape
7 Sealing tape rounded
8 Fixing screw
9 Sealing tape
· Seals and sashes are available at an aditional cost. Glazing seals
10 Butyl tape on the aluminium foil
11 Window frame - cross joint - HF21
12 Window frame - upper - HF16
13 Window frame - bottom - HF17
14 Outer glass fixing element - HF22
15 Fixing screw
16 Fixing screw
17 Fixing pad element
· When window frame is longer than 6,5m a dilatation element is
NOTE
· The detail does not include window sash and associated seals.
necessary.
are in domain of the glass supplier.
· Window detail can be finished quickly and repeatably. Details must respect simultaneous installation of the window and façadeelements. Windows can be delivered to the site assembled or disassembled.
F - BF
INSTALLATIONJOINT TYPE
QBISS ONEBF - BF
HORIZONTAL BUILDING APPLICATION
Internal Wall
B - BExternal Facade
B - BF
BF - B
F - B
F - BF
BUILDING APPLICATION
Internal Wall
External SoffitB - B
BF - B
F - B
External SoffitExternal FacadeInternal Ceiling
INSTALLATIONInternal Ceiling
JOINT TYPE
B - BF
BF - BF
QBISS ONEHORIZONTAL
VER
SIO
N: I
18.
07.
201
9 I
16 3 11
4 7 5 6
9 1715 14
81
30 31
DTC
TRIMO HANDBOOK / DETAIL SOLUTION DETAIL SOLUTION / TRIMO HANDBOOK
QO-H-01.01
FIRE RESISTANT JOINT OPTION:HORIZONTAL AND VERTICAL CUT
JOINT QO-H-01.01
Trimo Group holds full copyrights on the information and details provided on this media,therefore any unauthorized reproduction and distribution is strictly prohibited.JOINT
QO-H-01.01DETAIL:
DETAIL VIEWHORIZONTAL CUT
NOTE
· Direction of installation needs to be specified.· The detail is suitable for substructure within ± 2 mm tolerance.· Adjustable substructure to be used when tolerances are out of range.
1
POS.
2
3
4
5
ELEMENTSFixing screw
SCALE: M 1:4
Sealing tape
EPDM gasket
Decorative T extrusionFixing screw
Trimo Group holds full copyrights on the information and details provided on this media,therefore any unauthorized reproduction and distribution is strictly prohibited.JOINT
VER
SIO
N: I
18.
07.
201
9 I
QO-H-01.01DETAIL:
··
The sealing of the transversal joint is accomplished using an inserted sealing and decorative extrusion.Qbiss One façade element contains integrated corner gasket as part of Trimo patented sealing system.
Internal Ceiling
JOINT TYPE
External Facade
BUILDING APPLICATION
External SoffitB - B
B - BF
External Facade
BF - B
F - B
HORIZONTAL
Internal Wall
External SoffitInternal Ceiling
HORIZONTAL
Internal Wall
BF - BF
QBISS ONE F - BF
INSTALLATIONBUILDING APPLICATION
B - B
JOINT TYPE
BF - B
B - BF
BF - BF
F - BINSTALLATION
F - BFQBISS ONE
VER
SIO
N: I
18.
07.
201
9 I
Trimo Group holds full copyrights on the information and details provided on this media,therefore any unauthorized reproduction and distribution is strictly prohibited.EXTERNAL CORNER
QO-H-04.01DETAIL:
DETAIL VIEWHORIZONTAL CUT
Trimo Group holds full copyrights on the information and details provided on this media,therefore any unauthorized reproduction and distribution is strictly prohibited.EXTERNAL CORNER
VER
SIO
N: I
18.
07.
201
9 I
QO-H-04.01DETAIL:
1
POS.
2
3
4
5
ELEMENTSFixing screw
SCALE: M 1:4
Fixing screw
EPDM gasket
Decorative T extrusionFast fixing adjustable leveling substructure - supporting
NOTE
· Direction of installation needs to be specified.· The detail is suitable for substructure within ± 2 mm tolerance.
6 Sealing tape
7 Anchor bolt
8 Fast fixing adjustable leveling substructure - load bearing
9 Fixing screw Final attachment of facade elements is done through attachment profiles after adjacent elements are in place.·· External corner detail with horizontally laid corner elements offers a unique facade edge design.
BF - B
JOINT TYPE
BF - BF
QBISS ONE F - BF
External Soffit
B - BFINSTALLATION
Internal CeilingInternal WallInternal Wall B - BF
B - B
F - B
BF - B
BF - BF
F - B
F - BF
BUILDING APPLICATION
External SoffitExternal FacadeB - BHORIZONTAL
External Facade INSTALLATIONBUILDING APPLICATIONJOINT TYPE
Internal Ceiling
HORIZONTAL
QBISS ONE
VER
SIO
N: I
18.
07.
201
9 I
QO-H-04.01
QO-H-04.02
FIRE RESISTANT CORNER OPTION:HORIZONTAL CUT
EXTERNAL CORNER QO-H-04.01EXTERNAL CORNER QO-H-04.02
Trimo Group holds full copyrights on the information and details provided on this media,therefore any unauthorized reproduction and distribution is strictly prohibited.EXTERNAL CORNER
QO-H-04.02DETAIL:
DETAIL VIEWHORIZONTAL CUT
Trimo Group holds full copyrights on the information and details provided on this media,therefore any unauthorized reproduction and distribution is strictly prohibited.EXTERNAL CORNER
VER
SIO
N: I
18.
07.
201
9 I
QO-H-04.02DETAIL:
1
POS.
2
3
4
5
ELEMENTSFixing screw
SCALE: M 1:4
Insulation - MWSealing tape
EPDM gasket
Decorative T extrusion
· The detail is suitable for substructure within ± 2 mm tolerance.· Adjustable substructure to be used when tolerances are out of range.
6 Corner flashing - sharp edged
7 Fixing screw
8 Blind rivet
9 Fixing pad element
· Thermal Insulation to be inserted into flashing during the installation.· Installation direction can be changed.
NOTE
· Flashing to be manufactured in accordance with site measurements. The flashing is to be fitted by a 50 mm overlap.
· · External corner detail with horizontally laid corner elements offers a unique facade edge design.
Final attachment of facade elements is done through attachment profiles after adjacent elements are in place.·
F - BINSTALLATIONHORIZONTAL
INSTALLATION BF - BFHORIZONTAL
External Soffit
BUILDING APPLICATION
F - BF
Internal Wall
BF - B
BF - BF
QBISS ONEBUILDING APPLICATION
External FacadeInternal Ceiling
B - B
QBISS ONEExternal Facade
Internal CeilingB - B
JOINT TYPE
B - BF Internal Wall
External Soffit
B - BF
F - BFBF - B
F - B
JOINT TYPE
VER
SIO
N: I
18.
07.
201
9 I
Hint!
We accept challenges and develop tailor-made details for your unique architecture at your
location. Contact us by e-mail or phone:
[email protected] +386 (0)7 34 60 200
32 33
DTC
TRIMO HANDBOOK / DETAIL SOLUTION DETAIL SOLUTION / TRIMO HANDBOOK
II. FORMULA
VERTICAL SINGLE SPANINTERNAL WALL SYSTEM,TRIMOTERM FTVPRODUCT
TE-V-10.40
TE-V-01.40
TE-V-02.40
FIRE RESISTANT, INTERNAL WALL OPTIONVERTICAL CUT
TRIMO SYSTEM CONNECTION TE-V-10.40JOINT TE-V-01.40BASE TE-V-02.40
LONGITUDINAL JOINT
34 35
DTC
TRIMO HANDBOOK / DETAIL SOLUTION DETAIL SOLUTION / TRIMO HANDBOOK
III. FORMULA
FLAT SINGLE SPAN CEILING SYSTEM,QBISS ONEPRODUCT
FLAT CEILING OPTIONVERTICAL CUT
JOINT QO-F-13.01JOINT QO-F-13.02
QO-F
-13.
02
LONGITUDINAL JOINT
QO-F
-13.
01
36 37
DTC
TRIMO HANDBOOK / DETAIL SOLUTION DETAIL SOLUTION / TRIMO HANDBOOK
IV. FORMULA
FLAT MULTI SPANGREEN ROOF SYSTEM,TRIMOTERM FTVPRODUCT
FLAT ROOF OPTIONVERTICAL CUT
VALLEY TE-F-06.20JOINT TE-F-01.20PARAPET TE-F-03.20
Urbanscape© Green Roof layers / by KnaufInsulation
TRIMOTERM FTV
TRANSVERSAL JOINT
TE-F
-03.
20
TE-F
-01.
20
TE-F
-06.
20
38 39
DTC
TRIMO HANDBOOK / DETAIL SOLUTION DETAIL SOLUTION / TRIMO HANDBOOK
Hint!
For more detailed green roof layer structure explanation, check the Urbanscape System©
KnaufInsulation technical documentation.
FINAL FINISH
URBANSCAPE© GREEN ROOF LAYER BY KNAUF INSULATION
TRIMOTERM FTV BASE
DTC
WATERPROOFING MEMBRANE
URBANSCAPE© DRAINAGE LAYER
URBANSCAPE© ROOT MEMBRANE
URBANSCAPE© GREEN ROLL 4 cm
URBANSCAPE©SEDUM-MIXBLANKET
DETAIL SOLUTION / TRIMO HANDBOOK
DOWNLOADS / TRIMO HANDBOOK 41
DTC
TRIMO HANDBOOK / TOOLS40
TECHNICAL DOCUMENTS
• Facade systems• Roof systems• Structural performance
DATA CENTRE
• Green city animation
Hint!
In case of renovation scan QR code and check out Trimo Renovation handbook.
DATA CENTRE TOOLS
The tool is made to serve people during project realization. As pioneers in our industry, we have developed a user-friendly BIM tool for planning building envelopes that enables faster project planning by up to 20% compared to classic CAD design.
DATA CENTRETOOLS
BIMThe dedicated Trimo BIM libraries include the developed Trimoterm products in line with data centre product formula and associated details. BIM libraries for Trimo data centre envelope systems are available and for GRAPHISOFT ARCHICAD and Autodesk Revit software.
GREEN CITYThe green city is represented by architectures built with Trimo products that are up to 99% recyclable. In the animation, you notice architectures that are already built according to the product formula.
Discover your future data centre building in a vision of urban design, where we have placed our case study buildings made only with Trimo products.
Trimo BIM software tool ensures insight of product features data. Designing in a 3D environment reduces collisions, raises productivity and enables cost control with a list of quantities, which is a base for a quotation.
DOWNLOADS
We constantly strive to keep up with the times and make sure you have the latest information and tools.
DOWNLOADS
BROCHURES
• Facade systems• Roof systems• General
DESIGN TOOLS
• CAD details• BIM product libraries
RENOVATION
• Renovation handbook
06
Click for Trimo Data centre animation
THE VALUE PROPOSITION / TRIMO HANDBOOK 43
DTC
TRIMO HANDBOOK / HELP SERVICE 42
OPTIMAL SOLUTION
With long term experience and knowledge, we are especially focused to optimize solutions for data centres withhighdemandsforprefabricated,recyclable,firesafenon-condensational elements that can be easily installed.
DATA CENTRE PRODUCT FORMULA
DATA CENTRE DETAIL SOLUTIONS
We believe in smart, innovative, cost-effective, sustainable solutions therefore we can provide/develop a product formula with a complete envelope system solution for your data centre at your location.
SERVICE
• Visualizations, animations, VR• Technical management• Structural calculations• BIM product libraries and engineering• CAD design and shop-drawings
FIND YOUR LOCAL CONTACT www.trimo-group.com/en/company/about-trimo/global-presence
DATA CENTREHELP SERVICE
When you want to bring your project to the reality you can count on us. We provide comprehensive support throughout the entire duration of your project - from planning andpurchasingtoprojectmanagementandcreation,aswellasflawlessimplementation.
DATA CENTREHELP SERVICE
THE VALUE PROPOSITION
THE VALUE PROPOSITION
As you design unique architecture, we create the highest performing products to our customizedformulawhilsttailoringdetailsspecificallytoyourneeds.
Artme, a unique product for unique personalities
TRIMO DRESS CODE IS UNIQUE ARCHITECTURE
Publ
ishe
d by
: Trim
o d.
o.o.
, EN
07/
2020
Trimo Group holds full copyrights on the information and details provided in this document, therefore any unauthorised reproduction and distribution is strictly prohibited. Professional Care has been taken to ensure that the information/details are accurate, correct, complete and not misleading. However, Trimo, including its subsidiaries, does not accept responsibility or liability for errors or information, which is found to be misleading. Information/details in this document are for general purposes only. It is the user’s responsibility to check compliance with local laws. Any deviations in details and project solutions are the user’s responsibility. Under no circumstances, will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damagewhatsoever arising from lost profits as a result of or in connectionwith theuse of this document. All information issuedby TrimoGroup is subject to continuousdevelopment and information/details contained in this document were current on the date of issue. It is the user`s responsibility to obtain the most up-to-date information from Trimo when information/details are used for a project.
The latest version of the document is available at www.trimo-group.com. The latest version of the published document in English prevails over other translated documents.
For information about the delivery of panels see Trimo’s General conditions (https://trimo-group.com/en/trimo/general-conditions-of-sale).
TRIMO D.O.O.PRIJATELJEVA CESTA 12, 8210 TREBNJE, SLOVENIAT: +386 (0)7 34 60 200 F: +386 (0)7 34 60 127 [email protected]
HEADQUARTERS