37
Issue Details Date Drawn urban planning, surveying & development Brisbane PO Box 3128, West End QLD 4101 Ph: 07 3118 0600 [email protected] Mackay PO Box 11711, Mackay Caneland QLD 4740 Ph: 1300 278 783 [email protected] ts d AS/NZS 4801 www.intlcert.com I N T E R N A T I O N A L I F I T R E O I T A C C S N ISO 9001 www.intlcert.com I N T E R N A T I O N A L I F I T R E O I T A C C S N ISO 14001 www.intlcert.com I N T E R N A T I O N A L I F I T R E O I T A C C S N OHSHS 18001 www.intlcert.com I N T E R N A T I O N A L I F I T R E O I T A C C S N Checked A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA C REMAINDER OF STAGE 1 5/07/17 AnV LM 124 & 126 AMENDED D LOTS 21, 27, 28, 33, 34, 110, 23/11/17 CW BW (PHASE 2) DISCLOSURE PLAN STAGE 1 420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE * CONTOUR DATA: Queensland LiDAR Data - SE Queensland 2014 Project Based on or contains data provided by the State of Queensland (Department of Natural Resources and Mines) [2016]. In consideration of the State permitting use of this data you acknowledge and agree that the State gives no warranty in relation to the data (including accuracy, reliability, completeness, currency or suitability) and accepts no liability (including without limitation, liability in negligence) for any loss, damage or costs (including consequential damage) relating to any use of the data. Data must not be used for direct marketing or used in breach of the privacy laws. Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma), Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma) Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing aircraft from the 22nd June to 28th October 2014. © State of Queensland (Department of Natural Resources and Mines) [2016] DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION: Based on or contains data provided by the Department of Natural Resources and Mines, Queensland 2017 which gives no warranty in relation to the data (including accuracy, reliability, completeness or suitability) and accepts no liability (including without limitation, liability in negligence) for any loss, damage or costs (including consequential damage) relating to any use of the data. Accuracy: Bearing & Distance Entry Controlled - 0.1m © State of Queensland (Department of Natural Resources and Mines) 2017. Updated data available at http://qldspatial.information.qld.gov.au/catalogue// . Contact DTS Group Pty Ltd for metadata associated with the data hereon.

CN CN E R E RE T IFI FI CAS CAS T ION TON …...Ph: 07 3118 0600 [email protected] Mackay PO Box 11711, Mackay Caneland QLD 4740 Ph: 1300 278 783 [email protected] dts AS/NZS

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

124 & 126 AMENDED

D LOTS 21, 27, 28, 33, 34, 110, 23/11/17 CW BW

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
485
AutoCAD SHX Text
21
AutoCAD SHX Text
m
AutoCAD SHX Text
9%%d32%%13540%%136
AutoCAD SHX Text
14|92
AutoCAD SHX Text
32|5
AutoCAD SHX Text
9%%D32%%13540%%136
AutoCAD SHX Text
14|919
AutoCAD SHX Text
279%%D32%%13540%%136
AutoCAD SHX Text
32|5
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
99%%D32%%13550%%136
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
DRAFTING NOTE: Boundaries in GREEN are as per the approved final lot calculations 171025
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
21
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 21
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
D
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
23/11/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
1. This note is an integral part of this plan. This note is an integral part of this plan. 2. This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3. All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
404
AutoCAD SHX Text
22
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
13|75
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
7|75
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
24|0
AutoCAD SHX Text
294%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
324%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
354%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
22
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 22
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
Cancelling part of Lots 4 & 5 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
375
AutoCAD SHX Text
23
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
23
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 23
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
Cancelling part of Lots 4 & 5 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
375
AutoCAD SHX Text
24
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
24
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 24
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
Cancelling part of Lots 4 & 5 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
375
AutoCAD SHX Text
25
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
25
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 25
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
Cancelling part of Lots 4 & 5 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
404
AutoCAD SHX Text
26
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
13|75
AutoCAD SHX Text
189%%d32%%13520%%136
AutoCAD SHX Text
24|0
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
7|75
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
204%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
234%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
264%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
26
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 26
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
Cancelling part of Lots 4 & 5 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

124 & 126 AMENDED

D LOTS 21, 27, 28, 33, 34, 110, 23/11/17 CW BW

AutoCAD SHX Text
485
AutoCAD SHX Text
27
AutoCAD SHX Text
m
AutoCAD SHX Text
9%%D32%%13540%%136
AutoCAD SHX Text
14|919
AutoCAD SHX Text
99%%D32%%13550%%136
AutoCAD SHX Text
32|5
AutoCAD SHX Text
189%%D32%%13540%%136
AutoCAD SHX Text
14|917
AutoCAD SHX Text
279%%D32%%13540%%136
AutoCAD SHX Text
32|5
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
DRAFTING NOTE: Boundaries in GREEN are as per the approved final lot calculations 171025
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
27
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 27
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
D
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
23/11/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
1. This note is an integral part of this plan. This note is an integral part of this plan. 2. This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3. All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

124 & 126 AMENDED

D LOTS 21, 27, 28, 33, 34, 110, 23/11/17 CW BW

AutoCAD SHX Text
402
AutoCAD SHX Text
28
AutoCAD SHX Text
m
AutoCAD SHX Text
9%%D32%%13540%%136
AutoCAD SHX Text
99%%D32%%13550%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
13|417
AutoCAD SHX Text
9%%D32%%13540%%136
AutoCAD SHX Text
13|415
AutoCAD SHX Text
279%%D32%%13540%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
DRAFTING NOTE: Boundaries in GREEN are as per the approved final lot calculations 171025
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
28
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 28
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
D
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
23/11/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
1. This note is an integral part of this plan. This note is an integral part of this plan. 2. This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3. All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
471
AutoCAD SHX Text
29
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
16|0
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
24|0
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
294%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
324%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
354%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
29
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 29
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
420
AutoCAD SHX Text
30
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
14|0
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
14|0
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
30
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 30
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
420
AutoCAD SHX Text
31
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
14|0
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
14|0
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
31
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 31
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
471
AutoCAD SHX Text
32
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
16|0
AutoCAD SHX Text
189%%d32%%13520%%136
AutoCAD SHX Text
24|0
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
204%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
234%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
264%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
32
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 32
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

124 & 126 AMENDED

D LOTS 21, 27, 28, 33, 34, 110, 23/11/17 CW BW

AutoCAD SHX Text
402
AutoCAD SHX Text
33
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%D32%%13550%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
189%%D32%%13540%%136
AutoCAD SHX Text
14|414
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
9%%D32%%13540%%136
AutoCAD SHX Text
13|415
AutoCAD SHX Text
279%%D32%%13540%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
DRAFTING NOTE: Boundaries in GREEN are as per the approved final lot calculations 171025
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
33
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 33
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
D
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
23/11/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
1. This note is an integral part of this plan. This note is an integral part of this plan. 2. This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3. All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
391
AutoCAD SHX Text
35
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
13|338
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
7|337
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
24|0
AutoCAD SHX Text
294%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
324%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
354%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
35
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 35
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
375
AutoCAD SHX Text
36
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
36
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 36
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
375
AutoCAD SHX Text
37
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 37
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
300
AutoCAD SHX Text
38
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
38
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 38
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
391
AutoCAD SHX Text
39
AutoCAD SHX Text
m%%134
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
13|337
AutoCAD SHX Text
189%%d32%%13520%%136
AutoCAD SHX Text
24|0
AutoCAD SHX Text
204%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
234%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
264%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
7|337
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
39
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 39
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
429
AutoCAD SHX Text
102
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
30|0
AutoCAD SHX Text
189%%d32%%13520%%136
AutoCAD SHX Text
14|612
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
24|0
AutoCAD SHX Text
294%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
324%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
354%%d32%%13520%%136
AutoCAD SHX Text
3|106
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
8|612
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
102
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 102
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
464
AutoCAD SHX Text
103
AutoCAD SHX Text
m
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
37|112
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
37|112
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
103
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 103
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
464
AutoCAD SHX Text
104
AutoCAD SHX Text
m
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
37|112
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
37|112
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
104
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 104
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
464
AutoCAD SHX Text
105
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
37|112
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
37|112
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
105
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 105
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
371
AutoCAD SHX Text
106
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
37|112
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
37|112
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
106
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 106
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
371
AutoCAD SHX Text
107
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
37|112
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
37|112
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
107
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 107
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
371
AutoCAD SHX Text
108
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
37|112
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
37|112
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
108
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 108
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
371
AutoCAD SHX Text
109
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
37|112
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
37|112
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
109
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 109
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

124 & 126 AMENDED

D LOTS 21, 27, 28, 33, 34, 110, 23/11/17 CW BW

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
461
AutoCAD SHX Text
110
AutoCAD SHX Text
m
AutoCAD SHX Text
99%%D32%%13540%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
189%%D32%%13540%%136
AutoCAD SHX Text
36|112
AutoCAD SHX Text
270%%d27%%13510%%136
AutoCAD SHX Text
6|329
AutoCAD SHX Text
279%%D32%%13540%%136
AutoCAD SHX Text
6|25
AutoCAD SHX Text
9%%D32%%13540%%136
AutoCAD SHX Text
37|112
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
DRAFTING NOTE: Boundaries in GREEN are as per the approved final lot calculations 171025
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
110
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 110
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
D
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
23/11/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
Cancelling part of Lot 4 on RP101021 Locality of LOGAN RESERVE
AutoCAD SHX Text
1. This note is an integral part of this plan. This note is an integral part of this plan. 2. This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3. All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

124 & 126 AMENDED

D LOTS 21, 27, 28, 33, 34, 110, 23/11/17 CW BW

AutoCAD SHX Text
378
AutoCAD SHX Text
124
AutoCAD SHX Text
m
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
99%%d32%%13540%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
279%%d32%%13530%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
189%%D32%%13530%%136
AutoCAD SHX Text
30|249
AutoCAD SHX Text
9%%D32%%13530%%136
AutoCAD SHX Text
30|249
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
DRAFTING NOTE: Boundaries in GREEN are as per the approved final lot calculations 171025
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
124
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 124
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
D
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
23/11/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
1. This note is an integral part of this plan. This note is an integral part of this plan. 2. This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3. All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:
AutoCAD SHX Text
Cancelling part of Lot 5 on RP101021 Locality of LOGAN RESERVE

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
303
AutoCAD SHX Text
125
AutoCAD SHX Text
m
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|256
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|256
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
125
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 125
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:
AutoCAD SHX Text
Cancelling part of Lot 5 on RP101021 Locality of LOGAN RESERVE

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

124 & 126 AMENDED

D LOTS 21, 27, 28, 33, 34, 110, 23/11/17 CW BW

AutoCAD SHX Text
302
AutoCAD SHX Text
126
AutoCAD SHX Text
m
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
99%%d32%%13540%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
279%%d32%%13530%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
9%%D32%%13530%%136
AutoCAD SHX Text
30|249
AutoCAD SHX Text
9%%D32%%13530%%136
AutoCAD SHX Text
30|249
AutoCAD SHX Text
9%%D32%%13530%%136
AutoCAD SHX Text
30|249
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
DRAFTING NOTE: Boundaries in GREEN are as per the approved final lot calculations 171025
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
126
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 126
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
D
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
23/11/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
1. This note is an integral part of this plan. This note is an integral part of this plan. 2. This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3. All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:
AutoCAD SHX Text
Cancelling part of Lot 5 on RP101021 Locality of LOGAN RESERVE

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
378
AutoCAD SHX Text
127
AutoCAD SHX Text
m
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|256
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|256
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
127
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 127
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:
AutoCAD SHX Text
Cancelling part of Lot 5 on RP101021 Locality of LOGAN RESERVE

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
378
AutoCAD SHX Text
128
AutoCAD SHX Text
m
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|256
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|256
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
128
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 128
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:
AutoCAD SHX Text
Cancelling part of Lot 5 on RP101021 Locality of LOGAN RESERVE

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
378
AutoCAD SHX Text
129
AutoCAD SHX Text
m
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|256
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|256
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
129
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 129
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:
AutoCAD SHX Text
Cancelling part of Lot 5 on RP101021 Locality of LOGAN RESERVE

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
378
AutoCAD SHX Text
130
AutoCAD SHX Text
m
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|256
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|256
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
12|5
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
130
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 130
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:
AutoCAD SHX Text
Cancelling part of Lot 5 on RP101021 Locality of LOGAN RESERVE

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
303
AutoCAD SHX Text
131
AutoCAD SHX Text
m
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|256
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|256
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
131
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 131
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:
AutoCAD SHX Text
Cancelling part of Lot 5 on RP101021 Locality of LOGAN RESERVE

Issue Details Date Drawn

urban planning, surveying& development

BrisbanePO Box 3128, West End QLD 4101

Ph: 07 3118 0600

[email protected]

MackayPO Box 11711, Mackay Caneland QLD 4740

Ph: 1300 278 783

[email protected]

tsd AS/NZS

4801www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

9001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

FI

TR

E

OI

T

A

C

C

S

N

ISO

14001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

OHSHS

18001www.intlcert.com

I

N

TE

R

N

A

T

IO

NA

L

I

F

IT

R

E

OI

T

A

C

C

S

N

Checked

A ORIGINAL (STAGE 1, PHASE 1) 21/04/17 AnV DG/MS

B REMOVE EMT'S ON PHASE 1 24/04/17 DG AA

C REMAINDER OF STAGE 1 5/07/17 AnV LM

(PHASE 2)

DISCLOSURE PLAN

STAGE 1

420-428 CHAMBERS FLAT ROAD, LOGAN RESERVE

* CONTOUR DATA:

Queensland LiDAR Data - SE Queensland 2014 Project

Based on or contains data provided by the State of Queensland (Department of

Natural Resources and Mines) [2016]. In consideration of the State permitting use

of this data you acknowledge and agree that the State gives no warranty in

relation to the data (including accuracy, reliability, completeness, currency or

suitability) and accepts no liability (including without limitation, liability in

negligence) for any loss, damage or costs (including consequential damage)

relating to any use of the data. Data must not be used for direct marketing or used

in breach of the privacy laws.

Spatial Accuracy: Vertical Data: 0.3m @ 95% (68% confidence level or 1 sigma),

Horizontal Data: 0.8m @ 95% (68% confidence level or 1 sigma)

Acquisition: Airborne Laser Scanning (ALS) data was acquired from a fixed wing

aircraft from the 22nd June to 28th October 2014.

© State of Queensland (Department of Natural Resources and Mines) [2016]

DIGITAL CADASTRAL DATA BASE - BOUNDARY INFORMATION:

Based on or contains data provided by the Department of Natural Resources and

Mines, Queensland 2017 which gives no warranty in relation to the data (including

accuracy, reliability, completeness or suitability) and accepts no liability (including

without limitation, liability in negligence) for any loss, damage or costs (including

consequential damage) relating to any use of the data.

Accuracy: Bearing & Distance Entry Controlled - 0.1m

© State of Queensland (Department of Natural Resources and Mines) 2017.

Updated data available at http://qldspatial.information.qld.gov.au/catalogue// .

Contact DTS Group Pty Ltd for metadata associated with the data hereon.

AutoCAD SHX Text
303
AutoCAD SHX Text
132
AutoCAD SHX Text
m
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
99%%d32%%13520%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|256
AutoCAD SHX Text
9%%d32%%13520%%136
AutoCAD SHX Text
30|256
AutoCAD SHX Text
279%%d32%%13520%%136
AutoCAD SHX Text
10|0
AutoCAD SHX Text
CHAMBERS
AutoCAD SHX Text
FLAT
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
133
AutoCAD SHX Text
134
AutoCAD SHX Text
135
AutoCAD SHX Text
136
AutoCAD SHX Text
137
AutoCAD SHX Text
138
AutoCAD SHX Text
139
AutoCAD SHX Text
140
AutoCAD SHX Text
141
AutoCAD SHX Text
142
AutoCAD SHX Text
143
AutoCAD SHX Text
144
AutoCAD SHX Text
145
AutoCAD SHX Text
146
AutoCAD SHX Text
147
AutoCAD SHX Text
148
AutoCAD SHX Text
149
AutoCAD SHX Text
150
AutoCAD SHX Text
19
AutoCAD SHX Text
18
AutoCAD SHX Text
17
AutoCAD SHX Text
16
AutoCAD SHX Text
15
AutoCAD SHX Text
14
AutoCAD SHX Text
11
AutoCAD SHX Text
10
AutoCAD SHX Text
9
AutoCAD SHX Text
8
AutoCAD SHX Text
7
AutoCAD SHX Text
6
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
2
AutoCAD SHX Text
20
AutoCAD SHX Text
13
AutoCAD SHX Text
12
AutoCAD SHX Text
5
AutoCAD SHX Text
1
AutoCAD SHX Text
132
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
6
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
7
AutoCAD SHX Text
RP101021
AutoCAD SHX Text
3
AutoCAD SHX Text
131
AutoCAD SHX Text
130
AutoCAD SHX Text
129
AutoCAD SHX Text
128
AutoCAD SHX Text
127
AutoCAD SHX Text
126
AutoCAD SHX Text
125
AutoCAD SHX Text
124
AutoCAD SHX Text
21
AutoCAD SHX Text
27
AutoCAD SHX Text
28
AutoCAD SHX Text
33
AutoCAD SHX Text
34
AutoCAD SHX Text
22
AutoCAD SHX Text
23
AutoCAD SHX Text
25
AutoCAD SHX Text
26
AutoCAD SHX Text
24
AutoCAD SHX Text
29
AutoCAD SHX Text
30
AutoCAD SHX Text
31
AutoCAD SHX Text
32
AutoCAD SHX Text
35
AutoCAD SHX Text
36
AutoCAD SHX Text
37
AutoCAD SHX Text
38
AutoCAD SHX Text
39
AutoCAD SHX Text
102
AutoCAD SHX Text
103
AutoCAD SHX Text
104
AutoCAD SHX Text
105
AutoCAD SHX Text
106
AutoCAD SHX Text
107
AutoCAD SHX Text
108
AutoCAD SHX Text
109
AutoCAD SHX Text
110
AutoCAD SHX Text
111
AutoCAD SHX Text
112
AutoCAD SHX Text
88
AutoCAD SHX Text
89
AutoCAD SHX Text
90
AutoCAD SHX Text
91
AutoCAD SHX Text
92
AutoCAD SHX Text
93
AutoCAD SHX Text
94
AutoCAD SHX Text
95
AutoCAD SHX Text
96
AutoCAD SHX Text
101
AutoCAD SHX Text
100
AutoCAD SHX Text
99
AutoCAD SHX Text
98
AutoCAD SHX Text
97
AutoCAD SHX Text
41
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
43
AutoCAD SHX Text
44
AutoCAD SHX Text
45
AutoCAD SHX Text
46
AutoCAD SHX Text
47
AutoCAD SHX Text
48
AutoCAD SHX Text
49
AutoCAD SHX Text
50
AutoCAD SHX Text
51
AutoCAD SHX Text
52
AutoCAD SHX Text
53
AutoCAD SHX Text
54
AutoCAD SHX Text
55
AutoCAD SHX Text
56
AutoCAD SHX Text
57
AutoCAD SHX Text
58
AutoCAD SHX Text
59
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
NEW
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
%%UDISCLOSURE PLAN
AutoCAD SHX Text
This plan is to be read in conjunction with the disclosure statement prepared for this lot.
AutoCAD SHX Text
Scale 1:250 - Lengths are in Metres.
AutoCAD SHX Text
2
AutoCAD SHX Text
10
AutoCAD SHX Text
4
AutoCAD SHX Text
2
AutoCAD SHX Text
0
AutoCAD SHX Text
6
AutoCAD SHX Text
8
AutoCAD SHX Text
22
AutoCAD SHX Text
16
AutoCAD SHX Text
14
AutoCAD SHX Text
12
AutoCAD SHX Text
18
AutoCAD SHX Text
20
AutoCAD SHX Text
34
AutoCAD SHX Text
28
AutoCAD SHX Text
24
AutoCAD SHX Text
26
AutoCAD SHX Text
32
AutoCAD SHX Text
30
AutoCAD SHX Text
36
AutoCAD SHX Text
132
AutoCAD SHX Text
Dwg No:
AutoCAD SHX Text
Project:
AutoCAD SHX Text
Issue:
AutoCAD SHX Text
File:
AutoCAD SHX Text
Sheet:
AutoCAD SHX Text
Date:
AutoCAD SHX Text
%%UPROPOSED LOT 132
AutoCAD SHX Text
A3 5332/
AutoCAD SHX Text
BNE170254
AutoCAD SHX Text
C
AutoCAD SHX Text
B170254Dis1.dwg
AutoCAD SHX Text
5/07/17
AutoCAD SHX Text
Land Sales Act 1984 S11
AutoCAD SHX Text
Contour Interval - 0|5 metre
AutoCAD SHX Text
from Contour Data* below.
AutoCAD SHX Text
Existing Surface Contours derived
AutoCAD SHX Text
NEW
AutoCAD SHX Text
ROAD
AutoCAD SHX Text
Scale 1:3000
AutoCAD SHX Text
%%Ulocality map
AutoCAD SHX Text
0
AutoCAD SHX Text
50
AutoCAD SHX Text
100
AutoCAD SHX Text
150
AutoCAD SHX Text
200
AutoCAD SHX Text
250
AutoCAD SHX Text
300
AutoCAD SHX Text
1.This note is an integral part of this plan. This note is an integral part of this plan. 2.This plan shows details of the proposed lot on the This plan shows details of the proposed lot on the proposal plan DCP01 (Version D3) which accompanied the subdivision application and was approved by the Logan City Council on 14/06/2017, subject to conditions. 3.All dimensions and areas shown are subject to All dimensions and areas shown are subject to survey.
AutoCAD SHX Text
%%UNOTES:
AutoCAD SHX Text
Cancelling part of Lot 5 on RP101021 Locality of LOGAN RESERVE