© Copyright by Laser Photonics Corporation, 2019. All Rights Reserved.

2000-CTH JobSite™

CLASS 4 INDUSTRIAL GRADE JOBESITE READY LASER BLASTER

FOR PARTS CLEANING, RUST REMOVAL AND SURFACE CONDITIONING

2 | P a g e

CleanTech™ Laser Surface Preparation and Cleaning Systems The CleanTech™ Laser cleaning equipment removes the messy chemicals and contaminants from the equation. No more storing and using dangerous chemicals, hazardous fumes, costly clean-up and complicated procedures. CleanTech is the most cost effective, efficient and safe method of industrial cleaning, rust removal, paint removal and surface preparation. CleanTech Laser cleaning machines is are class 4 laser products and include added safety measures for easy and safe operation in all industries and work environments. Aerospace, defense, commercial, manufacturing and institutional industries are pressing for economical, efficient and Earth friendly cleaning processes. The CleanTech Laser provides a versatile and easy to use industrial-grade laser cleaning machine that is eco-friendly, renewable and budget friendly.

3 | P a g e

Application:

Applications The CleanTech™ Laser Systems operates in a wide variety of applications on a broad range of materials.

Applications and Types of Cleaning Materials

• Airplane De-painting • Metal Parts Cleaning • Anodizing removal • 3D Surface Cleaning and

Conditioning • Surface Texturing • Cosmetic surface

conditioning (replaces bid blasting)

• Selective paint Removal • Mold Cleaning • Joining pre-treatment • Pre Welding

• Cleaning • “On-The-Fly” Cleaning • Ablation (Anodized,

Painted or Coated) • Paint Stripping and

Removal • Rust and Corrosion

Removal • Degreasing • Induced Surface

Improvement • Parts Cleaning

• Aluminum • Stainless Steel • Mild Steel • Titanium • Copper • Brass • Nickel • Galvanized Metals • CFRP • Coated Plastics • Silicon • Plastic

• Multi-Coated Materials • Painted Metal Alloys • Cast Iron • Chrome • Carbide • And More

Other applications include (but are not limited to):

Cleanings of buildings & structures, decontamination, equipment & machinery, marine applications, pipes

& pipelines, structural steel, tanks, operating equipment, mold release cleaning, shipbuilding industry and

Marine Corrosion removal, Zinc coating removal for welding operation, automotive parts manufacturing,

food processing equipment cleaning, sewage treatment, rubber tires, gas and oil industries, rust removal,

aero craft de-painting, coating and paint stripping, degreasing, parts pre-coating, pre-welding treatment

operations, welding treatment, oxide removal.

4 | P a g e

5 | P a g e

6 | P a g e

Benefits Asset life extension, increased usage of components and parts, extended time between necessary maintenances, minimized liability & regulatory issues, protected integrity & reliability of assets, improved worker health & safety.

7 | P a g e

CleanTech™ Laser User Interface

The user-friendly software interface entails a fully integrated 7” and 9” Touch Screen GUI. It allows the choice any of preinstalled cleaning patterns or develop a custom pattern for a specific job, surface specification or throughput requirements. File links to several internal databases make the CleanTech™ program flexible and powerful.

Microprocessor controlled, system is instantly ready when the key is turned ON. Touch screen allows you to choose among the 5 pre designed cleaning patterns.

Transparent Protective Window: CDRH rated yellow transparent laser rated acrylic window for visualization of lasing processes and easier alignment.

Operations & Maintenance Manual (in English) includes:

• Service information • General description • Laser safety manual • Software manual (Appendix B) • Operation description • Troubleshoot guide • Warranty certificate

8 | P a g e

Super Compact: it is designed as a Professional level laser cleaning and surface treatment system for

small areas requiring delicate cleaning, de-painting and other surface preparation operations.

It can be delivered in ruggedized Pelican Case for hush environments.

Microprocessor controlled, system is instantly ready when the key is turned ON. Touch screen allows you

to choose among the 5 pre designed cleaning patterns.

Heavy duty industrial design is based on years of experience building Hand Held Lasers for marking and

engraving applications. No PC needed.

Built-in water-to-water heat exchanges for use with factory water

Secure positioning of the laser Blaster Head

9 | P a g e

Optical Cable Organizer

On the Head Laser Status lights Indicators

On the Head Laser pattern control manual mode operation

10 | P a g e

LPC-2000CTH JobSite™ Laser Blaster

LPC-2000CTH Jobsite™ CleanTech Laser Blaster is a water-cooled laser system.

The LPC-2000CTH Jobsite™ is a high performance, industrial-grade, fast, precise and incredibly productive laser cleaning tool.

Super Compact it is designed as Heavy Duty Industrial Grade Professional level laser cleaning and surface treatment system for large areas requiring cleaning, de-painting and other surface preparation operations.

Microprocessor controlled, system is instantly ready when the key is turned ON. Touch screen allows you to choose among the 5 pre designed cleaning patterns.

Heavy duty industrial design is based on years of experience building Hand Held Lasers for marking and engraving applications. No PC needed.

Can be coupled with industrial robots and placed inside safety work cells with interlocks for full compliance with OSHA and FDA CDRH as Class 1 Laser Systems.

Can be installed inside the Class 1 Industrial Cleaning Platforms like Titan and Titan Express for hi throughput parts cleaning.

11 | P a g e

2000W Laser Cleaning and De-Coating CleanTech™ Handheld LPC-2000CTH Specifications

Regulatory Requirements

Certification and Compliance

21CFR 1040.10 Compliance: Fiber Lasers are a Class 4 laser as designated by the CDRH and meet the full requirements for a stand-alone laser system as defined by 21 CFR 1040.10 under the Radiation Control for Health and Safety Act of 1968.

Laser Unit Requirements

Unit Purpose and application Laser cleaning and de-coating system. Rust removal, decontamination.

Safety Class IV laser

A nominal average output laser power of Average Power (W), Max 2000W

Operational voltage. If supplier requires a different voltage it will be quoted separately.

380-480 VAC, 3-phase, 60Hz, 30A max

Operational temperature and relative humidity +5 to +45˚ C

5– 90% non-condensing

Laser source life 50,000 Hr

Laser source A mobile, robust and transportable laser, with all components built in

Dimensions Width: 445 mm Depth: 812 mm Height: 515 mm

Weight: 126 kg

Cable & Beam Requirements

Fiber optic cable with a length of at least 20m

Unit’s fiber optic cable QBH connector plugged in the Handheld unit

Beam parameters Wavelength 1078 nm Focused to 200 um diameter spot

Features

Optics No output focusing lens, antireflective coated exit window with air knife

Cleaning pattern Adjustable size of X and Y up to 4” x 1.5”

12 | P a g e

Operating interface 9” Touch Panel

Cleaning Pattern 5 predesigned pattern modes

Beam sweeping Proprietary waveform minimizes the “burning effect” at end of sweep strokes

Working distance From exit window - 9”

Unit include Dual hand switches as per OSHA requirements

Handheld optic end effector has suction port for dust/fume evacuation. Dust/Fume Extraction port 1.5” Dia.

Dust/Fume extraction unit operates from an 110V/1PH/60Hz power supply not exceeding 20A or 230V/1PH/60Hz power supply not exceeding 10A.

Quoted separately. Depends on throughput and fumes to extract

Filter Dust Particles/HEPA filter

Portability Fume extractor equipped with casters

Laser and fiber QBH connection are water cooled with laser chiller Quoted separately

Parameters Cooling capacity 6500W Water flow 70 L/min max

Dimensions

Width: 60 cm Length: 85 cm Height: 103 cm

Weight: 95 kg Operational voltage. If supplier requires a different voltage it will be quoted separately.

220VAC / 60Hz / 16A max

Features Cooled water circulates through flexible hoses

Portability Heat exchanger - built in. Chiller equipped with casters.

Controller Specification Unit operates with a dedicated 9” touch screen controller with ability of connecting it to a standalone laptop or desktop computer.

USB port to operate Windows (laptop required only for programming)

Additional Specification

Unit could be provided with protection curtains rated for use with Class IV lasers Sold by panels or custom designed

13 | P a g e

Unit could be provided laser safety glasses rated for use with Class IV lasers Offered at customer request

Unit could be supplied with parts, filters, and any other consumables necessary for routine operation and maintenance over a period of twelve months after the date of commissioning.

Optics cleaning kit, filters depends on fume extractor, spare protective lens cover, and spare optics.

Unit supplied with maintenance and operation manuals for the unit as built and delivered.

YES

The supplier provide technical support via telephone and email for a minimum of twelve months after the date of commissioning

YES

Unit includes full parts and labor warranty for a minimum of twelve months after the date of commissioning

YES

Cooling Type Water Cooling

Water Chiller External

Application Research Center Laser Photonics maintains an applications lab for processing customer samples and assisting with process development. Our applications lab has the latest testing equipment to analyze all of your application needs.

14 | P a g e

Safety and Compliance Disclosure

Safety Considerations During Operation 1064 nM wavelength laser light emitted from this laser system is invisible and may be harmful to the human eye. Proper laser safety eyewear must be worn during operation. 21 CFR 1040.10 Compliance The product is a Class iV laser as designated by the CDRH and MEET the full requirements for a stand-alone laser system as defined by 21 CFR 1040.10 under the Radiation Control for Health and Safety Act of 1968. As an added level of security, a redundantly switched safety interlock system helps prevent accidental exposure to excess laser radiation. Plus, the system is equipped with an electrical power manual reset, a key-locked laser power switch and a remote interlock connector. Finally, the system has audible and visible emission indicators with five (5) second emission delay settings. All these features, in combination, constitute the laser radiation safety system, which allows the LaserTower™ Series of equipment be used in a safe and secure manner. IMPORTANT NOTICE: ALL SPECIFICATIONS, TECHNICAL DATA AND OTHER INFORMATION CONTAINED IN THIS DOCUMENT, AND ALL STATEMENTS ABOUT THE PRODUCT(S) IDENTIFIED IN THIS DOCUMENT, ARE PRELIMINARY IN NATURE AND ARE PROVIDED “AS IS,” WITHOUT WARRANTY OR ASSURANCE OF ANY KIND. LASER PHOTONICS MAKES NO REPRESENTATION OR WARRANTY, EXPRESS OR IMPLIED, REGARDING THE PRODUCT(S) OR THEIR SPECIFICATIONS. ALL INFORMATION IS SUBJECT TO CHANGE. PLEASE CONTACT LASER PHOTONICS FOR MORE INFORMATION. LASER PHOTONICS AND THE LASER PHOTONICS LOGO ARE TRADEMARKS OF LASER PHOTONICS CORPORATION. OTHER TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. COPYRIGHT LASER PHOTONICS CORPORATION. ALL RIGHTS RESERVED.

Requirements beyond those listed herein will be quoted upon request. Contact Laser Photonics office or visit our website www.laserphotonics.com if you need any assistance determining which capabilities best suit your needs.

Laser Photonics Corporation

1101 N Keller Road Suite G ● Orlando, FL 32810 ● USA Tel.: (407) 477-5618 ● FAX: (407) 804-1002

www.laserphotonics.com