Cisco IOS Switching Services Command Cisco IOS Switching Services Command Reference CONTENTS About Cisco IOS Software Documentation v Using Cisco IOS Software

  • View
    245

  • Download
    14

Embed Size (px)

Text of Cisco IOS Switching Services Command Cisco IOS Switching Services Command Reference CONTENTS About...

  • 170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.com

    Cisco Systems, Inc.Corporate Headquarters

    Tel:800 553-NETS (6387)408 526-4000

    Fax: 408 526-4100

    Cisco IOSSwitching ServicesCommand ReferenceRelease 12.2

    Customer Order Number: DOC-7811750=Text Part Number: 78-11750-02

  • THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

    THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

    The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCBs public domain version of the UNIX operating system. All rights reserved. Copyright 1981, Regents of the University of California.

    NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED AS IS WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.

    IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

    Powered Network logo, Cisco Systems Networking Academy, the Cisco Systems Networking Academy logo, Discover All Thats Possible, Fast Step, Follow Me Browsing, FormShare, FrameShare, GigaStack, IGX, Internet Quotient, IP/VC, iQ Breakthrough, iQ Expertise, iQ FastTrack, the iQ Logo, iQ Net Readiness Scorecard, MGX, the Networkers logo, Packet, PIX, RateMUX, ScriptBuilder, ScriptShare, SlideCast, SMARTnet, TransPath, Voice LAN, Wavelength Router, WebViewer are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, Empowering the Internet Generation, are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, the Cisco IOS logo, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Enterprise/Solver, EtherChannel, EtherSwitch, FastHub, FastSwitch, IOS, IP/TV, LightStream, MICA, Network Registrar, Post-Routing, Pre-Routing, Registrar, StrataView Plus, Stratm, SwitchProbe, TeleRouter, and VCO are registered trademarks of Cisco Systems, Inc. or its affiliates in the U.S. and certain other countries.

    All other brands, names, or trademarks mentioned in this document or Web site are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0101R)

    Cisco IOS Switching Services Command Reference 2002 2006 Cisco Systems, Inc.All rights reserved.

  • iiiCisco IOS Switching Services Command Reference

    C O N T E N T S

    About Cisco IOS Software Documentation v

    Using Cisco IOS Software xiii

    Cisco IOS Switching Commands XR-1

    INDEX

  • Contents

    ivCisco IOS Switching Services Command Reference

  • vCisco IOS Switching Services Command Reference

    About Cisco IOS Software Documentation

    This chapter discusses the objectives, audience, organization, and conventions of Cisco IOS software documentation. It also provides sources for obtaining documentation from Cisco Systems.

    Documentation ObjectivesCisco IOS software documentation describes the tasks and commands necessary to configure and maintain Cisco networking devices.

    AudienceThe Cisco IOS software documentation set is intended primarily for users who configure and maintain Cisco networking devices (such as routers and switches) but who may not be familiar with the tasks, the relationship between tasks, or the Cisco IOS software commands necessary to perform particular tasks. The Cisco IOS software documentation set is also intended for those users experienced with Cisco IOS software who need to know about new features, new configuration options, and new software characteristics in the current Cisco IOS software release.

    Documentation OrganizationThe Cisco IOS software documentation set consists of documentation modules and master indexes. In addition to the main documentation set, there are supporting documents and resources.

    Documentation ModulesThe Cisco IOS documentation modules consist of configuration guides and corresponding command reference publications. Chapters in a configuration guide describe protocols, configuration tasks, and Cisco IOS software functionality and contain comprehensive configuration examples. Chapters in a command reference publication provide complete Cisco IOS command syntax information. Use each configuration guide in conjunction with its corresponding command reference publication.

  • About Cisco IOS Software DocumentationDocumentation Organization

    viCisco IOS Switching Services Command Reference

    Figure 1 shows the Cisco IOS software documentation modules.

    Note The abbreviations (for example, FC and FR) next to the book icons are page designators, which are defined in a key in the index of each document to help you with navigation. The bullets under each module list the major technology areas discussed in the corresponding books.

    Figure 1 Cisco IOS Software Documentation Modules

    Cisco IOSIP ConfigurationGuide

    IPC

    Cisco IOSConfigurationFundamentalsConfigurationGuide

    Cisco IOSConfigurationFundamentalsCommandReference

    Module FC/FR: Cisco IOS User

    Interfaces File Management System Management

    Cisco IOSIP CommandReference,Volume 2 of 3:RoutingProtocols

    Module IPC/IP1R/IP2R/IP3R: IP Addressing and Services IP Routing Protocols IP Multicast

    Cisco IOSAppleTalk andNovell IPXConfigurationGuide

    Cisco IOSAppleTalk andNovell IPXCommandReference

    Module P2C/P2R: AppleTalk Novell IPX

    Cisco IOSApollo Domain,Banyan VINES,DECnet, ISOCLNS, and XNSConfigurationGuide

    Cisco IOSApollo Domain,Banyan VINES,DECnet, ISOCLNS, and XNSCommandReference

    Module P3C/P3R: Apollo Domain Banyan VINES DECnet ISO CLNS XNS

    Cisco IOSWide-AreaNetworkingConfigurationGuide

    Cisco IOSWide-AreaNetworkingCommandReference

    Module WC/WR: ATM Broadband Access Frame Relay SMDS X.25 and LAPB

    Cisco IOSSecurityConfigurationGuide

    Cisco IOSSecurityCommandReference

    Module SC/SR: AAA Security Services Security Server Protocols Traffic Filtering and Firewalls IP Security and Encryption Passwords and Privileges Neighbor Router Authentication IP Security Options Supported AV Pairs

    Cisco IOSInterfaceConfigurationGuide

    Cisco IOSInterfaceCommandReference

    Module IC/IR: LAN Interfaces Serial Interfaces Logical Interfaces

    47953

    FC

    FR

    IP2R

    WC

    WR

    SC

    SR

    MWC

    MWR

    Cisco IOSMobileWirelessConfigurationGuide

    Cisco IOSMobileWirelessCommandReference

    Module MWC/MWR: General Packet

    Radio Service

    IC

    IR

    Cisco IOSIP CommandReference,Volume 1 of 3:Addressingand Services

    Cisco IOSIP CommandReference,Volume 3 of 3:Multicast

    P2C

    P2R

    IP1R

    IP3R

    P3C

    P3R

  • About Cisco IOS Software DocumentationDocumentation Organization

    viiCisco IOS Switching Services Command Reference

    Cisco IOSVoice, Video,and FaxConfigurationGuide

    Cisco IOSVoice, Video,and FaxCommandReference

    Module VC/VR: Voice over IP Call Control Signalling Voice over

    Frame Relay Voice over ATM Telephony Applications Trunk Management Fax, Video, and

    Modem Support

    Cisco IOSQuality ofServiceSolutionsConfigurationGuide

    Cisco IOSQuality ofServiceSolutionsCommandReference

    Module QC/QR: Packet Classification Congestion Management Congestion Avoidance Policing and Shaping Signalling Link Efficiency

    Mechanisms

    Module DC/DR: Preparing for Dial Access Modem and Dial Shelf Configuration

    and Management ISDN Configuration Signalling Configuration Dial-on-Demand Routing

    Configuration Dial-Backup Configuration Dial-Related Addressing Services Virtual Templates, Profiles, and

    Networks PPP Configuration Callback and Bandwidth Allocation

    Configuration Dial Access Specialized Features Dial Access Scenarios

    Module BC/B1R: Transparent

    Bridging SRB Token Ring

    Inter-Switch Link Token Ring Route

    Switch Module RSRB DLSw+ Serial Tunnel and

    Block Serial Tunnel LLC2 and SDLC IBM Network

    Media Translation SNA Frame Relay

    Access NCIA Client/Server Airline Product Set

    Module BC/B2R: DSPU and SNA

    Service Point SNA Switching

    Services Cisco Transaction

    Connection Cisco Mainframe

    Channel Connection CLAW and TCP/IP

    Offload CSNA, CMPC,

    and CMPC+ TN3270 Server

    Cisco IOSSwitchingServicesConfigurationGuide

    Cisco IOSSwitchingServicesCommandReference

    Module XC/XR: Cisco IOS

    Switching Paths NetFlow Switching Multiprotocol Label Switching Multilayer Switching Multicast Distributed Switching Virtual LANs LAN Emulation

    47954

    Cisco IOSBridging andIBM NetworkingConfigurationGuide

    Cisco IOSBridg