16
Year CID Lit. Bore Vin# Description Short Block Complete Block Casting Crank Forging Head Casting Crank Kit No. CHRYSLER CORPORATION CHRYSLER - DODGE - PLYMOUTH 4 & 6 CYLINDER PASSENGER "OHV" & "OHC" Acclaim, Aries, Aspen, Caravelle, Challenger, Charger, Cordoba, Coronet, Dart, Daytona, Demon, Diplomat, Dynasty, Duster, E-Class, Fifth Avenue, Fury, Grand Fury, Horizon, Lancer, Lazer, LeBaron, LeBaron GTS, Magnum, Mirada, Newport, New Yorker, Omni, Peugeot, Rampage, Reliant, Royal, Salon, Scamp, Shadow, Shelby Charger, Spirit, Stealth, Sundance, TC, TC-3, Town & Country, Turismo, Valiant, Volare, 024, 300, 400, 600 (Includes Eagles after 1988) SEE NOTE AT END OF SECTION 1997-96 231 3.8 3.780 L OHV, FWD, FI, Roller Lifters, Det. Sensor on left side,Minivan 134701 134711 4621944 4556433 4621510 23153 1995-94 231 3.8 3.780 L OHV, Roller Tappets 134700 134710 4556430 4621763 6433 4621510 23153 1993-92 231 3.8 3.780 L V6, OHV, S.E.F.I., 5th Avenue, Imperial 133900 133910 3654 23152 1991-90 231 3.8 3.780 L V6, OHV, E.F.I., 5th Avenue, Imperial 133800 133810 4556430 4556433 4448015 23152 1983-81 225 3.7 3.40 F Cast Shaft, Hyd. Lifters, Crankshaft Centering Ring is 2.157" 132400 132413 4095246 4095778 23125 1980-75 225 3.7 3.40 C/D Cast Shaft, Mech. Lifters, Crankshaft Centering Ring is 2.157" W/A.I.R. order 132313 132300 132310 3698966 7501366 4027600-5 3698447-1 4104362 23123 1974-67 225 3.7 3.40 C When Unit is used W/A904 Trans. Assembly #3515827, Chrysler Part #2515608 Sleeve should be used in Crankshaft Pilot Hole, Crankshaft Centering Ring is 2.157" 131700 131710 2463430 2806830 2205528 2202857 2658998 2843935 3769307 2843169 2128654 2202952 2206035 23120 1967-60 225 3.7 3.40 A904 Trans., Crankshaft Centering Ring is 1.962" 133500 133510 2205528 2202857 2463430 2128492 2264479 2268613 2128654 2202952 2206035 23113 1997-95 215 3.5 3.780 F V6, OHC, 24 Valves Hyd. Adjusters, Cross Bolt Mains, Concorde, Intrepid, LHS 130800 130810* 4556530 4663458 AID 4663490 23154 1993-92 215 3.5 3.780 F V6, OHC, S.F.I., 24 Valves Hyd. Adjusters, Cross Bolt Mains, Chrysler Concorde 132800 132810* 4556530 4663458 AID 4315807 23154 1995-94 202 3.3 3.660 R V6, OHV, Compressed Natural Gas.(Flex Fuel) CF CF 23152 1997-94 202 3.3 3.660 T V6, OHV, Chain Drive, LH Cars, Concord, Intrepid, Vision 130500 130510* 4621763 4483654 4621510 23152 1995-94 202 3.3 3.660 R V6, OHV, Chain Drive, W/Roller Tappets, Det Sensor on Left Side 132700 132710* 4448030 4556430 4621763 3654 4621510 23152 1993 202 3.3 3.660 T V6, OHV, Chain Drive, LH Cars, Before 06/26/93, Concord, Intrepid, Vision 130300 130310* 4556430 4483654 4448015 23152 1993 202 3.3 3.660 T V6, OHV, Chain Drive, LH Cars, After 06/26/93, Concord, Intrepid, Vision 130400 130410* 4621763 4483654 4621510 23152 1993 202 3.3 3.660 R V6, OHV, Chain Drive, W/Roller Tappets 133300 133310* 4448030 4483654 4448015 23152 1992-90 202 3.3 3.660 R V6, OHV, Chain Drive, W/Roller Tappets 132900 132910* 4448030 3654 4448015 23152 1997-96 201 3.3 R OHV,FI, Chain Drive, Roller Lifter, Det. Sensor on Right Side, Mini Van 134900 134910 4621944 4483654 4621510 1995-93 181 3.0 3.59 3 V6, SOHC, Roller Rockers, Main Caps All One Assy. 457400 457410* 6G72 T3A,T3B, T3E 33181 1995-93 181 3.0 3.59 C V6, DOHC, Turbocharged, Stealth 456300 456310* 6G72 72,E1,P1, TDC 33183 1995-93 181 3.0 3.59 B V6, DOHC, W/O Turbocharger, Stealth 454600 454610* 6G72 72,E1,P1, TDC 33183 1995-93 181 3.0 3.59 H V6, OHC, Stealth 453500 453510* 6G72 T3A,T3N, T3E,TDD 33181 1993 181 3.0 3.59 S V6, OHC, Stealth 454500 454510* 33181 * Do not come with oil pump or kit. 8

CHRYSLER CORPORATION CHRYSLER - DODGE - PLYMOUTH 4 & …

  • Upload
    others

  • View
    46

  • Download
    0

Embed Size (px)

Citation preview


Year

CID Lit.

Bore Vin#

Description

Short Block

Complete

Block Casting

Crank Forging

Head Casting

Crank Kit No.

CHRYSLER CORPORATION CHRYSLER - DODGE - PLYMOUTH 4 & 6 CYLINDER PASSENGER "OHV" & "OHC" Acclaim, Aries, Aspen, Caravelle, Challenger, Charger, Cordoba, Coronet, Dart, Daytona, Demon, Diplomat, Dynasty, Duster, E-Class, Fifth Avenue, Fury, Grand Fury, Horizon, Lancer, Lazer, LeBaron, LeBaron GTS, Magnum, Mirada, Newport, New Yorker, Omni, Peugeot, Rampage, Reliant, Royal, Salon, Scamp, Shadow, Shelby Charger, Spirit, Stealth, Sundance, TC, TC-3, Town & Country, Turismo, Valiant, Volare, 024, 300, 400, 600 (Includes Eagles after 1988) SEE NOTE AT END OF SECTION 1997-96 231

3.8 3.780

L OHV, FWD, FI, Roller Lifters, Det. Sensor on left side,Minivan

134701 134711 4621944 4556433 4621510 23153

1995-94 231 3.8

3.780 L

OHV, Roller Tappets 134700 134710 4556430 4621763

6433 4621510 23153

1993-92 231 3.8

3.780 L

V6, OHV, S.E.F.I., 5th Avenue, Imperial

133900 133910 3654 23152

1991-90 231 3.8

3.780 L

V6, OHV, E.F.I., 5th Avenue, Imperial

133800 133810 4556430 4556433 4448015 23152

1983-81 225 3.7

3.40 F

Cast Shaft, Hyd. Lifters, Crankshaft Centering Ring is 2.157"

132400 132413 4095246 4095778 23125

1980-75 225 3.7

3.40 C/D

Cast Shaft, Mech. Lifters, Crankshaft Centering Ring is 2.157" W/A.I.R. order 132313

132300 132310 3698966 7501366

4027600-5 3698447-1 4104362

23123

1974-67 225 3.7

3.40 C

When Unit is used W/A904 Trans. Assembly #3515827, Chrysler Part #2515608 Sleeve should be used in Crankshaft Pilot Hole, Crankshaft Centering Ring is 2.157"

131700 131710 2463430 2806830 2205528 2202857

2658998 2843935 3769307

2843169 2128654 2202952 2206035

23120

1967-60 225 3.7

3.40 A904 Trans., Crankshaft Centering Ring is 1.962"

133500 133510 2205528 2202857 2463430

2128492 2264479 2268613

2128654 2202952 2206035

23113

1997-95 215 3.5

3.780 F

V6, OHC, 24 Valves Hyd. Adjusters, Cross Bolt Mains, Concorde, Intrepid, LHS

130800 130810* 4556530 4663458

AID 4663490 23154

1993-92 215 3.5

3.780 F

V6, OHC, S.F.I., 24 Valves Hyd. Adjusters, Cross Bolt Mains, Chrysler Concorde

132800 132810* 4556530 4663458

AID 4315807 23154

1995-94 202 3.3

3.660 R

V6, OHV, Compressed Natural Gas.(Flex Fuel)

CF CF 23152

1997-94 202 3.3

3.660 T

V6, OHV, Chain Drive, LH Cars, Concord, Intrepid, Vision

130500 130510* 4621763 4483654 4621510 23152

1995-94 202 3.3

3.660 R

V6, OHV, Chain Drive, W/Roller Tappets, Det Sensor on Left Side

132700 132710* 4448030 4556430 4621763

3654 4621510 23152

1993 202 3.3

3.660 T

V6, OHV, Chain Drive, LH Cars, Before 06/26/93, Concord, Intrepid, Vision

130300 130310* 4556430 4483654 4448015 23152

1993 202 3.3

3.660 T

V6, OHV, Chain Drive, LH Cars, After 06/26/93, Concord, Intrepid, Vision

130400 130410* 4621763 4483654 4621510 23152

1993 202 3.3

3.660 R

V6, OHV, Chain Drive, W/Roller Tappets

133300 133310* 4448030 4483654 4448015 23152

1992-90 202 3.3

3.660 R

V6, OHV, Chain Drive, W/Roller Tappets

132900 132910* 4448030 3654 4448015 23152

1997-96 201 3.3

R

OHV,FI, Chain Drive, Roller Lifter, Det. Sensor on Right Side, Mini Van

134900 134910 4621944 4483654 4621510

1995-93 181 3.0

3.59 3

V6, SOHC, Roller Rockers, Main Caps All One Assy.

457400 457410* 6G72 T3A,T3B,T3E

33181

1995-93 181 3.0

3.59 C

V6, DOHC, Turbocharged, Stealth

456300 456310* 6G72 72,E1,P1,TDC

33183

1995-93 181 3.0

3.59 B

V6, DOHC, W/O Turbocharger, Stealth

454600 454610* 6G72 72,E1,P1,TDC

33183

1995-93 181 3.0

3.59 H

V6, OHC, Stealth 453500 453510* 6G72 T3A,T3N,T3E,TDD

33181

1993 181 3.0

3.59 S

V6, OHC, Stealth 454500 454510* 33181

* Do not come with oil pump or kit.

8


Year

CID Lit.

Bore Vin#

Description

Short Block

Complete

Block Casting

Crank Forging

Head Casting

Crank Kit No.

9

CHRYSLER - DODGE - PLYMOUTH 4 & 6 CYLINDER PASSENGER "OHV" & "OHC" Continued SEE NOTE AT END OF SECTION 1992-91 181

3.0 3.59

B V6, DOHC, W/O Turbocharger, Stealth

455800 455810* 6G72 72,E1,P1,TDC

33181

1995-91 181 3.0

3.59 S

V6, OHC, Stealth 455000 455010* 6G72 33181

1992 181 3.0

3.59 C

V6, DOHC, Turbocharged, Stealth

456200 456210* 33182

1992-88 181 3.0

3.59 3

V6, OHC, Roller Rockers, Main Caps All One Assy.

459900 459910* 6G72 33181

1991 181 3.0

3.59 C

V6, DOHC, Turbocharged, Stealth

455900 455910* 6G72 72,E1,P1,TDC

33181

1988-87 181 3.0

3.59 3

V6, OHC, FWD, Flat Rockers, Main Caps All One Assy.

459700 459710* 6G72 T3A,T3N,T3E,TDD

33181

1992-91 180 3.0

3.66 U

V6,T.B.I.,Alum.Block,W/Wet Sleeves, W/Detonation Sensor

XX 202810* 33184

1991-89 180 3.0

3.66 U

V6,T.B.I.,Alum.Block,W/Wet Sleeves, W/O Detonation Sensor

XX 202710* 33184

1988 180 3.0

3.66 J

V6,T.B.I.,Alum.Block,W/Wet Sleeves

XX 202610* 33184

1989-85 156 2.6

3.586 G

2600cc, OHC, Auto Trans., FWD, W/7/8" Shaft out Rear of Valve Cover, W/O Air Jet Valves, Mech. Valve Adj., W/O Vent Tubes on Side of Block

459400A 459410A* G54 4G54

G54 33111

1987-85 156 2.6

3.586 G

2600cc, OHC, FWD, Auto Trans., W/7/8" Shaft out Rear of Valve Cover, W/Air Jet Valves, Mech. Valve Adj., W/O Vent Tubes on Side of Block

459400A 459310A* G54 G54 33111

1985-81 156 2.6

3.586 G

2600cc, OHC, FWD, Auto Trans., W/7/8" Shaft out Rear of Valve Cover, W/Air Jet Valves, 1 Vent Tube on Side of Block

459200A 459110A* G54 G54 33111

1985-81 156 2.6

3.586 G

2600cc, OHC, FWD, Auto Trans., W/7/8" Shaft out Rear of Valve Cover, W/O Air Jet Valves, 1 Vent Tube on Side of Block

459200A 459210A* G54 G54 33111

1985-81 156 2.6

3.586 G

2600cc, OHC, FWD, Auto Trans., W/7/8" Shaft out Rear of Valve Cover, W/Air Jet Valves, 2 Vent Tubes on Side of Block

459000A 459010A* G54 G54 33111

1982-81 156 2.6

3.586 D

2600cc, OHC, FWD, Auto Trans., W/5/8" Shaft out Rear of Valve Cover, W/Air Jet Valves, 2 Vent Tubes on Side of Block

459000A 459810A* G54 G54 33111

1995-93 153 2.5

3.445 V

OHC, Roller Rockers, Flex Fuel (Gas & Nat. Gas)

223000 223010* 4315730 4448486 4105782 23142

1995-89 153 2.5

3.445 K

2500cc, OHC, F.I., Roller Rockers

222900 222910* 4315730 4556030

4448486 4105782 23142

1992-91 153 2.5

3.445 J

2500cc, OHC, Roller Rockers, Turbocharged, Hyd. Adjusters

225700 225710* 4105782 23143

1992-91 153 2.5

3.445 H/K

2500cc, OHC, Roller Rockers, Sequential P.F.I.

223200 223210* 4448486 4105782 23142

1992-89 153 2.5

3.445 J

2500cc, OHC, W/Roller Rockers, Turbocharged

225100 225110* 4105782 23143

1988 153 2.5

3.445 K

2500cc, OHC, Roller Rockers, 5 Bolt Front Pulley

224900 223110* 4273230 4273232 4105782 23140

1987-86 153 2.5

3.445 K

2500cc, OHC, W/O Roller Rockers, 4 Bolt Front Pulley

224900 224910* 4273230 4273232 4105782 23140

A - Bottom two bell housing bolt holes on block are staggered off the oil pan rail. * Do not come with oil pump or kit.


Year

CID Lit.

Bore Vin#

Description

Short Block

Complete

Block Casting

Crank Forging

Head Casting

Crank Kit No.

10

CHRYSLER - DODGE - PLYMOUTH 4 & 6 CYLINDER PASSENGER "OHV" & "OHC" Continued - SEE NOTE AT END OF SECTION 1995 152

2.5 3.28

H V6, OHC,FWD, EEB-ENG, 24 Valve, Roller Rocker

453000 453010* 33175

2000-96 146 2.4

B

MPI, DOHC, 16 Valve, Caravan 453701 453711 4621916

1995 143 2.4

3.41 X

4 Cyl., 16 Valve, F.I. 453700 453710 4G64 4G64B

4667086 33162

1994-93 143 2.4

3.41 G

SOHC, FWD, 16 Valve, F.I., Hyd Valve Adjusters

453900 453910 4G64 4G64B

33162

1992 143 2.4

3.41 W

SOHC, FWD,8 Valve, F.I., Hyd Valve Adjusters

453800 453810 4G64 4G64B

33162

1994-90 135 2.2

3.445 A

2200cc, OHC, Turbocharged, Intercooled

222400 222410* 4556030 4448493 4105782 23137

1993-91 135 2.2

3.445 A

2200cc, DOHC, Has 3 Piece Rocker Cover, Turbocharged, Dual Balance Shafts

222500 222510* 4621031 4483197 4484450 4442660

23137

1992-89 135 2.2

3.445 D

2200cc, OHC, Roller Rockers 221600 221610* 4315730 4501851

4448493 4105782 23139

1990 135 2.2

3.445 R

2200cc, DOHC, Roller Rockers, Turbocharged, Has 1 Piece Rocker Cover, Dual Balance Shafts

222700 222710* 4621031 4523814 600000203 23137

1989 135 2.2

3.445 A

2200cc, OHC, Turbocharged, Intercooled

222300 222310* 4501851 4448493 4105782 23139

1989 135 2.2

3.445 R

2200cc, DOHC, Roller Rockers, Turbocharged

222600 222610* 23136

1988 135 2.2

3.445 D

2200cc, OHC, Roller Rockers, 8 Hole Crankshaft Flange, 5 Bolt Front Pulley

221100 221410* 4343834 4343830 4343930

5214990 4105782 23138

1988 135 2.2

3.445 E

2200cc, OHC, Roller Rockers, Turbocharged, W/O Intercooler, 8 Hole Crankshaft Flange

221200 222110* 4343930 4343834 4343830 4387230

5214990 4105782 23138

1988 135 2.2

3.445 A

2200cc, OHC, Roller Rockers, Turbocharged, Intercooled, 8 Hole Crankshaft Flange

221500 222210* 4343930 4343834 4343830 4387230

5214990 4105782 23138

1987-86 135 2.2

3.445 C

2200cc, OHC, Carbureted, 8 Hole Crankshaft Flange

220800 220810* 4343830 5214990 4105782 23138

1987-86 135 2.2

3.445 D

2200cc, OHC, F.I., 8 Hole Crankshaft Flange

221100 221110* 4343834 4343830 4343930

5214990 4105782 23138

1987-86 135 2.2

3.445 E

2200cc, OHC, W/O Roller Rockers, Turbocharged, W/O Intercooler, 8 Hole Crankshaft Flange

221200 221210* 4343930 4343834 4343830 4387230

5214990 4105782 23138

1987 135 2.2

3.445 A

2200cc, OHC, W/O Roller Rockers, Turbocharged, Intercooled, 8 Hole Crankshaft Flange

221500 221510* 4343930 4343834 4343830 4387230

5214990 4105782 23138

1985 135 2.2

3.445 D

2200cc, OHC, F.I., 11mm Head Bolts, 6 Hole Crankshaft Flange

221300 221310* 4343930 5214738 4323287 23116

1985 135 2.2

3.445 E

2200cc, OHC, Turbocharged, 11mm Head Bolts, 6 Hole Crankshaft Flange

222000 222010* 4343930 4343530

5214738 4323287 23116

1985 135 2.2

3.445 C

2200cc, OHC, 10mm Head Bolts, 6 Hole Crankshaft Flange

224000 224010* 4298430 5214738 4323287 23116

1985 135 2.2

3.445 E

2200cc, OHC, Turbocharged, 10mm Head Bolts, 6 Hole Crankshaft Flange

224700 224710* 4298430 5214738 4323287 23116

1984-83 135 2.2

3.445 C

2200cc, OHC 221800 221910* 4105730 5214738 4105445 23116

1984 135 2.2

3.445 E

2200cc, OHC, Turbocharged, 6 Hole Crankshaft Flange

221700 221710* 4273330 4105730

5214738 4105445 23116

1982-81 135 2.2

3.445 C

2200cc, OHC 221800 221810* 5203630 5214738 5203655 23116

* Do not come with oil pump or kit.


Year

CID Lit.

Bore Vin#

Description

Short Block

Complete

Block Casting

Crank Forging

Head Casting

Crank Kit No.

11

CHRYSLER - DODGE - PLYMOUTH 4 & 6 CYLINDER PASSENGER "OHV" & "OHC" Continued - SEE NOTE AT END OF SECTION 1998-95 122

2.0 3.346 C/N

SOHC, 16 Valves, Roller Rockers, Neon, Stratis, Main Caps all one Assembly

456201 456211* 4667642-up 4667768-low

4667755 4556737 33156

1998-95 122 2.0

3.346 Y

DOHC, 16 Valves, Roller Rockers, MPFI, Avenger, Sebring, Eagle Talon, Neon

456301 456311* 4667642-up 4667768-low

4667755 4667867 33156

1998-95 122 2.0

3.346 Y

DOHC, 16 Valves, Roller Rockers, MPFI, Neon, Stratis, Main Caps all one Assembly

456302 456312* 4667642-up 4667768-low

4667755 086 4667086

33156

1994-92 122 2.0

3.346 2000cc, DOHC, Turbocharged, Laser

457000 457010* 4G63 4G63B

63GC 63GU

33160

1994-92 122 2.0

3.346 2000cc, DOHC, W/O Turbocharger, Laser

457800 457810* 4G63 4G63B

63GC 63GU

33159

1992-90 122 2.0

3.346 R

2000cc,DOHC, W/Balance Shafts, Laser

456800 456810* 4G63 4G63B

63GC 63GU

33159

1992-90 122 2.0

3.346 U

2000cc,DOHC, Turbocharged, W/Balance Shafts, Laser

456900 456910* 4G63 4G63B

63GC 63GU

33158

1994-90 110 1.8

3.173 B

1800cc, OHC, Dual Bal. Shafts, Laser

454700 454710* 4G37 33108

1992-90 107 1.8

3.173 T

1800cc, OHC, Dual Balance Shafts, Laser

454900 454910* 33107

1983-80 105 1.7

3.13 A/B

1700cc, OHC 223300 223310* 4910321H 23104

1979-78 105 1.7

3.13 A

1700cc, OHC 228600 228610* 4910321H 049F 23104

1987-83 98 1.6

3.17 A

1600cc, OHC, Peugeot NA NA

NOTE: Engines with A.I.R., Smog, order from factory. NOTE: Information for the following engines 1974-61, 170-198; 1954-46, 237-251-265 can be found in the Miscellaneous Listing on Page 101 & 102. ARROW - CHALLENGER - CHAMP - COLT - COLT VISTA - COLT WAGON - CONQUEST - SAPPORO 1989-85 156

2.6 3.586

N 2600cc, OHC, RWD, W/Air Jet Valves, Turbocharged, Intercooled, Hyd. Valve Adj

458600ABC 458610B* G54B G54 33111A

1988-84 156 2.6

3.586 H

2600cc, OHC, RWD, W/Air Jet Valves, Turbocharged, Hyd. Valve Adj

458200ABC 458210B* 4G54 G54B

G54 33111A

1987-86 156 2.6

3.586 E

2600cc, OHC, RWD, W/Air Jet Valves, Carbureted, Hyd. Valve Adj

458500ABC 458510B* G54 33111A

1985-84 156 2.6

3.586 E

2600cc,, OHC, RWD, W/Air Jet Valves

458400ABC 458410B* G54 33111A

1983-81 156 2.6

3.586 E

2600cc,, OHC, RWD, W/Air Jet Valves

458100ABC 458110B* G54 33111A

1983-81 156 2.6

3.586 7

2600cc,, OHC, RWD, W/Air Jet Valves, Bell Hsg. Dowel Pin Holes are 13 1/2" Between Centers

457900ABC 457910B* G54 33111A

1980 156 2.6

3.586 W

2600cc,, OHC, RWD, W/Air Jet Valves

457700ABC 457710B* G54B G54 33111A

1980-76 156 2.6

3.586 F

2600cc,, OHC, RWD, W/Air Jet Valves, Bell Hsg. Dowel Pin Holes are 12 1/2" Between Centers

457600ABC 457610B* G54B G54 33110A

1980-76 156 2.6

3.586 F

2600cc,, OHC, Bell Hsg. Dowel Pin Holes are 13 1/2" Between Centers

457500ABC 457510B* G54B G54 33109A

A - Bottom two bell housing bolts on block are straight across off the oil pan. Specify if 12 1/2" or 13 1/2". Specify if block has any vent tubes on side. Specify if for automatic or standard transmission. Automatic transmission has a bushing in the rear of the crank that forms a centering ring. Standard transmission does not have this type of bushing, and rear of crank is flat. B - Specify if semi-circle opening on valve cover sealing rail in front of head measures 1 5/16" or 2 1/8" across. C - Call factory for DOHC engine. * Do not come with oil pump or kit.


Year

CID Lit.

Bore Vin#

Description

Short Block

Complete

Block Casting

Crank Forging

Head Casting

Crank Kit No.

12

ARROW - CHALLENGER - CHAMP - COLT - COLT VISTA - COLT WAGON - CONQUEST - SAPPORO Continued SEE NOTE AT END OF SECTION 1994-93 143

2.4 3.41 OHC, Hyd. Adjusters, Vista 453900 453910 33162

1992 143 2.4

3.41 OHC, Hyd Adjusters 453800 453810 33162

1994-92 122 2.0

3.346 F/U

FWD, DOHC, Turbo, Laser After 4-3-92, 16 Valve, MMC

457700 457710 4G63 4G63B

63GC 63GU

33157

1994-92 122 2.0

3.346 R/E

FWD, DOHC, W/O Turbo,Laser After 4-3-92, 16 Valve, MMC

457800 457810 4G63 4G63B

63GC 63GU

33157

1992-90 122 2.0

3.346 R

FWD, DOHC, W/Balance Shaft, Laser before 4-3-92, 16 Valve

456800 456810 4G63 4G63B

63GC 63GU

33157

1992-90 122 2.0

3.346 U

FWD, DOHC, Turbo, Laser Before 4-3-92, 16 Valve, MMC

456900 456910 4G63 4G63B

63GC 63GU

33157

1991-90 122 2.0

3.346 V

2000cc, OHC, M.F.I., Dual Balance Shafts

456700ABC 456710* 33157

1989 122 2.0

3.346 V

2000cc, OHC, M.F.I., Dual Balance Shafts

456600ABC 456610* 33157

1988 122 2.0

3.346 D

2000cc, OHC, Belt Drive, 2 B.C., Hyd. Valve Adjusters

456500 456510* 33157

1987 122 2.0

3.346 D

2000cc, OHC, Belt Drive, 2 B.C., Hyd. Valve Adjusters

456400 456410* G63 33157

1986-85 122 2.0

3.346 D

2000cc, OHC, Belt Drive 456100 456110* G63 33157

1984-83 122 2.0

3.346 5

2000cc, OHC, Belt Drive 456000 456010* G62 33157

1982-78 122 2.0

3.31 5

2000cc, OHC, W/O Air Jet Valve, Bell Housing Dowel Pin Holes are 12 1/2" Between Centers

455400A 455410A G52 33106A

1982-78 122 2.0

3.31 5

2000cc, OHC, W Air Jet Valve, Bell Housing Dowel Pin Holes are 12 1/2" Between Centers

455400A 455510A* G52 33106A

1978-76 122 2.0

3.31 5

2000cc, OHC, W/O Air Jet Valve, Bell Housing Dowel Pin Holes are 13 1/2" Between Centers

455200A 455210A* G52 33105A

1978-76 122 2.0

3.31 U

2000cc, OHC, W Air Jet Valve, Bell Housing Dowel Pin Holes are 13 1/2" Between Centers

455200A 455310A* G52 33105A

1975-74 122 2.0

3.31 U

2000cc, OHC 455100 455110* 52A G52 33105

1995-94 110 1.8

3.189 C

OHC, Roller Rockers W/Screw Adjusters

452600 452610* 4G93 33107

1993-90 110 1.8

3.189 D/B

1800cc, OHC, Auto Trans., M.P.I., Dual Balance Shafts, Colt, Colt Vista

454900 454910* 4G63 33107

1993-90 110 1.8

3.189 D/B

1800cc, OHC, Std. Trans., M.P.I., Dual Balance Shafts, Colt, Colt Vista

454800 454810* 4G63 33108

1990-89 107 1.8

3.173 T

1800cc, OHC, M.P.I., Dual Bal. Shafts Colt, Colt Vista

454700 454710* 4G93 33108

A - Bottom two bell housing bolts on block are straight across off the oil pan. Specify if 12 1/2" or 13 1/2". Specify if block has any vent tubes on side. Specify if for automatic or standard transmission. Automatic transmission has a bushing in the rear of the crank that forms a centering ring. Standard transmission does not have this type of bushing, and rear of crank is flat. * Do not come with oil pump or kit.


Year

CID Lit.

Bore Vin#

Description

Short Block

Complete

Block Casting

Crank Forging

Head Casting

Crank Kit No.

13

ARROW - CHALLENGER - CHAMP - COLT - COLT VISTA - COLT WAGON - CONQUEST - SAPPORO Continued SEE NOTE AT END OF SECTION 1990 98

1.6 3.03

Y 1600cc, DOHC, Auto. Trans. 451800 451810* 33104

1990 98 1.6

3.03 Y

1600cc, DOHC, Std. Trans., Colt

452100 452110* 4G61 33104

1990 98 1.6

3.03 Z

1600cc, DOHC, Std. Trans., Turbocharged, Colt

452300 452310* 4G61 33104

1990 98 1.6

3.03 Z

1600cc, DOHC, Auto. Trans., Turbocharged, Colt

452400 452410* 4G61 33104

1989 98 1.6

3.03 Y

1600cc, DOHC, Colt 452000 452010* 33104

1990-89 98 1.6

3.03 Z

1600cc, DOHC, Turbocharged, Colt

452200 452210* 4G61 33104

1990-89 98 1.6

3.03 F

1600cc, OHC, Turbocharged, W/Balance Shafts

451700 451710* G52B 33104

1990-89 98 1.6

3.03 F

1600cc, OHC, F.I., Dual Balance Shafts, Colt

451900 451910* 33104

1986-85 98 1.6

3.03 A

1600cc, OHC, Std. Trans., Carbureted

454000 454010* 33117

1986-85 98 1.6

3.03 A

1600cc, OHC, Auto. Trans., Carbureted

454100 454110* 33132

1988-87 98 1.6

3.03 F

1600cc, OHC, Auto. Trans., F.I. 454300 454310* 4G32 G32B

31 33132

1988-87 98 1.6

3.03 F

1600cc, OHC, Std. Trans., F.I. 454400 454410* 4G32 G32B

31 33117

1995-93 91 1.5

2.97 1500cc, Auto. Trans., M.F.I. Roller Rockers, LC, 12 Valve

450700 450710* 4G15 G1 33115

1995-93 91 1.5

2.97 1500cc, Std. Trans., M.F.I. Roller Rockers, LC

450600 450610* 4G15 G15B

G1 33114

1992-91 91 1.5

2.97 A

1500cc, Auto. Trans., M.F.I., Colt, LC

450900 450910* 4G15 G15B

G1 33101

1992-91 91 1.5

2.97 A

1500cc, Std. Trans., M.F.I., Colt LC

450800 450810* 4G15 G1 33112

1990-89 91 1.5

2.97 X

1500cc, OHC, Auto. Trans., M.F.I., Colt, LA

451500 451510A* 33101

1990-89 91 1.5

2.97 X

1500cc, OHC, Std. Trans., M.F.I., Colt, LA

451400 451410A* 33112

1988-87 91 1.5

2.97 K

1500cc, OHC, Std. Trans., Carbureted, LA

451300 451310A* 33122

1988-87 91 1.5

2.97 K

1500cc, OHC, Auto. Trans., Carbureted, LA

451200 451210A* 33124

1986-85 91 1.5

2.97 K

1500cc, OHC, Auto. Trans., Carbureted, LA

451100 451110A* 33124

1986-85 91 1.5

2.97 K

1500cc, OHC, Std. Trans., Carbureted, LA

451000 451010A* 33122

NOTE: Must get I.D. stamping on the head surface (i.e. 2A, 2D, 2F, 2H, 52A, 52B, 54A) on top right front of block. See drawing below.

A - LC engines are without air jet valves. LA engines are with air jet valves, call the factory. * Do not come with oil pump or kit.


Year

CID Lit.

Bore Vin#

Description

Short Block

Complete

Block Casting

Crank Forging

Head Casting

Crank Kit No.

14

CHRYSLER - DODGE - PLYMOUTH - 6 CYLINDER - PASSENGER "L" HEAD 1959-57 230

3.8 3.25 Long Center Sump Pan, Side

Mounts XX 133210B 1484929 1557708 1676337 23122A

23115A 1959-55 230

3.8 3.25 Short Center Sump Pan, High

Mount XX 133110B 1484929 1557708 1616823 23122A

23115A 1959-42 230

3.8 3.25 XX 133010B 1119729

1326299 1484929

868929 1557708

1311804 1120803 1405849

23122A

23115A

1954-42 218 3.6

3.25 4 Hole Crankshaft XX 220010B 1119729 1326299

952068 856080

1326304 1311810 1120803

23118

1954-42 218 3.6

3.25 Hi-Drive Transmission, 8 Hole Crankshaft

XX 220110B 1326299 1484929

1316540 864719

1326304 23114

A - 23122 will have a 3/4" pulley bolt, 23115 will have a 1 1/8" pulley bolt. B - Oil pump not supplied. CHRYSLER - DODGE - PLYMOUTH V8 & V10 PASSENGER "OHV" Aspen,Barracuda,Challenger,Charger,Cordoba,Coronet,Dart,Demon,Diplomat,Duster,Fifth Avenue,Fury,Imperial,LeBaron, Magnum,Mirada,Monaco,Newport,New Yorker,Polora,Roadrunner,St. Regis,Satellite,Sebring,Valiant,Viper,Volare SEE NOTE AT END OF SECTION 1993-92 488 4.00 V10, OHV, E.F.I., Viper XX XX XX

1979-73 440 7.2

4.32 T/U

Cast Shaft, Auto. Trans. 226700A 226710A 4006630 3830930 3698830

4027175 3751888 8698461

3769975 4006452 3462346 3751213

23148A

1979-73 440 7.2

4.32 T/U

Cast Shaft, Std. Trans 227700A 227710A 4006630 3830930 3698830

4027175 3751888 8698461

3769975 4006452 3462346 3751213

23148

1978-73 440 7.2

4.32 T

Forged Shaft, Auto. Trans 226800A 226810A 4006630 3830930 3698830

2206160 3769975 4006452 3462346 3751213

23131A

1978-73 440 7.2

4.32 T

Forged Shaft, Std. Trans. 227800A 227810A 4006630 3830930 3698830

2206160 3769975 4006452 3462346 3751213

23131

1972-66 440 7.2

4.32 T/U/

V

Forged Shaft, Auto. Trans 135600A 135610A 2536430 2206160 2406158 2843906

23131A

1972-66 440 7.2

4.32 T/U/

V

Forged Shaft, Std. Trans. 135700A 135710A 2536430 2206160 2406158 2843906

23131

1979-73 400 6.6

4.34 L/P M/N

Cast Shaft, Auto. Trans. 226900A 226910A 3698630 4006530

3751877 3462923 4027172

3769975 4006452 3462346 3751213

23144A

1979-73 400 6.6

4.34 L/P M/N

Cast Shaft, Std. Trans 227900A 227910A 3698630 4006530

3751877 3462923 4027172

3769975 4006452 3462346 3751213

23144

1978-73 400 6.6

4.34 L/P M/N

Forged Shaft, Auto. Trans 226600A 226610A 3698630 4006530

2206159 3769975 4006452 3462346 3751213

23128A

1978-73 400 6.6

4.34 L/P M/N

Forged Shaft, Std. Trans. 227600A 227610A 3698630 4006530

2206159 3769975 4006452 3462346 3751213

23128

1971-68 383 6.3

4.25 L/N G/H

Forged Shaft, Auto. Trans 133700A 131910A 2468130 2206159 2843906 23128A

A - To identify cast or forged crankshafts, see drawing on page 16.


Year

CID Lit.

Bore Vin#

Description

Short Block

Complete

Block Casting

Crank Forging

Head Casting

Crank Kit No.

15

CHRYSLER - DODGE - PLYMOUTH V8 & V10 PASSENGER "OHV" Continued SEE NOTE AT END OF SECTION 1971-68 383

6.3 4.25 L/N G/H

Forged Shaft, Std. Trans. 132100A 132110A 2468130 2206159 2843906 23128

1971-69 383 6.3

4.25 L/N G/H

Cast Shaft, Auto. Trans. 132000A 132010A 2468130 3482923 2843906 23144A

1971-69 383 6.3

4.25 L/N G/H

Cast Shaft, Std. Trans. 132200A 132210A 2468130 3482923 2843906 23144

1967-65 383 6.3

4.25 Forged Shaft, Hyd. Cam. 133700A 133710A 2120329 2120429 2468130

2206159 2406516 2406780

23128

1980-76 360 5.9

4.25 J/K/L

226500 226513 4045601 4006830 4179930

4027169 3418640 3418995

3769974 3671587 4027596

23124

1975 360 5.9

4.00 J/K/L

226500 223910 3418496 3870230

3418640 3769974 3671587 4027596

23124

1974-71 360 5.9

4.00 J/K/L

226500 223610 3418496 3870230

3418640 3418915 23124

1973-72 340 5.6

4.04 J/K/L

Cast Shaft After Engine # HM-340R-39118000

224300A 224310A 2780930 2658393 3462387 3751841

3671587 3418915

23135A

1972-68 340 5.6

4.04 J/K/L

Forged Shaft to Engine # HM-340R-39118000

223700A 223710A 2780930 2532457 2843686 2128869

2531894 23121A

1989-85 318 5.2

3.91 P

Roller Tappets, Carbureted 225900 225913 4323330 4387560

3751841 3462387

4323302 4343646

23135

1989-85 318 5.2

3.91 S

Flat Tappets 220300 226113 4323330 3751841 3462387

4323345 23135

1984-80 318 5.2

3.91 G/P

Exc. E-48 Engine, Mtg. Bolt Hole for Brace from Trans. Bell Housing to Eng. Block is 10" on Left Side From Rear of Block

220300 220413 4179730 4104230

3462387 2658393 3751841

4027593 4027163 3769973

23135

1984-80 318 5.2

3.91 H/R

E-48 Engine, Mtg. Bolt Hole for Brace from Trans. Bell Housing to Eng. Block is 10" on Left Side From Rear of Block

220300 220413 4179730 4104230

3462387 2658393 3751841

3671587 4027596

23135

1984-80 318 5.2

3.91 H/R

E-48 Engine, Mtg. Bolt Hole for Brace from Trans. Bell Housing to Eng. Block is 9" on Left Side From Rear of Block

226200 226413B 4179730 4104230 4006730

3462387 2658393 3751841

3671587 4027596

23135

1984-76 318 5.2

3.91 G/P

Exc E-48 Engine, Mtg. Bolt Hole for Brace from Trans. Bell Housing to Eng. Block is 9" on Left Side From Rear of Block

226200 226213B 4104230 4006730

3462387 2658393 3751841

4027163 3769973 3671585 3751851 4027593

23135

1975 318 5.2

3.91 G

220200 220910 2806030 2536030

2843868 2128869 2532457

3769973 3671585 4027593

23135

1975-67 318 5.2

3.91 F/G

226200 220210 2806030 2536030

2843868 2128869

2843675 2658920

23135

A - To identify cast or forged crankshaft, see drawing on page 16. B - See page 23 to identify heads. NOTE: Standard performance engines only. NOTE: Engines with A.I.R., Smog, order from factory. NOTE: Information for the following engines, 1972-71, 400; 1965-59, 361-383-413; 1969-64, 273; 1966-57, 318 can be found in the Miscellaneous Listing on page 101 & 102.


Year

CID Lit.

Bore Vin#

Description

Short Block

Complete

Block Casting

Crank Forging

Head Casting

Crank Kit No.

16

DODGE 6 CYLINDER TRUCK "L" HEAD & INDUSTRIAL 1965-61 265

4.3 3.438 Head approx. 25" Long, Full

Flow Filter XX 138710A 1400229 870744

1400188 1120805 1120806 1632430

23101B Shaft With #1400188

1960-53 265 4.3

3.438 Head approx. 25" Long, Non Full Flow Filter

XX 138510A 1400229 1400188 870744

1120805 1120806 1632430

23100B Shaft With #870744

1960-48 251 4.1

3.438 Head approx. 25" Long XX 136610A 1138129 1400229 1115829

864718 870715 1400188

1120805 1120806 1120903

23108B Shaft With #864718 #870715

1960-49 230 3.8

3.25 Head approx. 23" Long 8 Hole Crankshaft

XX 136410A 1484929 1326229 1119729

1557708 868929

1311804 1326386 1405849 1616823 1676337

23122C 23115C

1948-42 230 3.8

3.25 Head approx. 23" Long 8 Hole Crankshaft

XX 133010A 1119729 1326229 1484929

868929 1557708

1120804 1311804 1326386 1405849 1616823 1676337

23122C 23115C

1954-42 218 3.6

3.25 Head approx. 23" Long 4 Hole Crankshaft

XX 136210A 1119729 1326229

856080 952068

1120803 1311810 1326306

23118

A - Includes head & gaskets - no oil pump. B - Replacement crankshaft must have same casting number as crankshaft being removed from engine. C - 23122 will have 3/4" pulley bolt, 23115 will have 1 1/8" pulley bolt.


Year

CID Lit.

Bore Vin#

Description

Short Block

Complete

Block Casting

Crank Forging

Head Casting

Crank Kit No.

17

DODGE 4 & 6 CYLINDER TRUCK & INDUSTRIAL "OHV" & "OHC" Arrow, Caravan, D-Series, D-50, Dakota, Mini Ram, Ram Charger, Raider, Rampage, Scamp, Trail Duster, Voyager, W-Series SEE NOTE AT END OF SECTION 1998-92 238

3.9 3.91

X V6, OHV, Roller Tappets 134400 134413 53006711 4323769 53006680 23164

1991-90 238 3.9

3.91 X

V6, OHV, Roller Tappets 134100 134113 4323729 4323769 53005709 23163

1991-90 238 3.9

3.91 X

V6, OHV, Roller Tappets 134000 134013 4323729 4323769 23163

1989-88 238 3.9

3.91 X

V6, Roller Tappets 133600 133613 4323730 4323769 4227979 23163

1987-86 238 3.9

3.91 X

V6, Flat Tappets 133400 133413 4323730 4323769 4227979 23163

1997-96 231 3.8

L

OHV, FWD, FI, Roller Lifter, Det Sensor on Left Side, Mini Vans, Unshrouded Head

4621944 4556433 4621510

1995-93 231 3.8

M

OHV, FWD, FI, Flat Lifter, Det Sensor on Left Side, Mini Vans, Unshrouded Head

134700 134710 4556430 4556433 4621510

1987-81 225 3.7

3.40 H

Cast Shaft, Center Sump Pan, Hyd. Lifters, Crankshaft Centering Ring is 2.157" For LP Gas Order: 132414

132400 132413 4095246 4095778 23125

1987-81 225 3.7

3.40 H

Cast Shaft, Rear Sump Pan, Hyd. Lifters, Crankshaft Centering Ring is 2.157" For LP Gas Order: 132614

132400 132613 4095246 4095778 23125

1980-75 225 3.7

3.40 C/N/

B

Cast Shaft, Rear Sump Pan, Crank Centering Ring is 2.157" W/A.I.R. ORDER 134813

132300 134810 3698966 3698447 4027600

23123

1974-67 225 3.7

3.40 B

Forged Shaft, Front Sump Pan, Crankshaft Centering Ring is 2.157" For LP Gas Order: 130712

131700 130710 2463430 2806830

2658998 2843935 3769307

2843169 23120

1967-61 225 3.7

3.40 Alternator Type Block, Front Sump Pan, Crankshaft Centering Ring is 1.962"

133500 134510 2202857 2463430 2205528

2128492 2205554 2264479

2128654 2202952 2206035

23113

1995-94 202 3.3

3.66 R

V6, OHV, Chain Drive, Roller Tappets, Natural Gas & Reg Gas (Flex Fuel)

CF CF 3654 23152

1995-94 202 3.3

3.66 R

V6, OHV, F.I., Chain Drive, Roller Tappets

132700 132710* 4621763 4483654 4621510 23152

1993 202 3.3

3.66 R

V6, OHV, F.I., Chain Drive, Roller Tappets

133300 133310* 4556430 4483654 4448015 23152

1992-90 202 3.3

3.66 R

V6, OHV, FWD, Timing Cover #4448877, Caravan, Voyager, Mini Ram Van

132900 132910* 4448030 4483654 4448015 23152

1997-96 201 3.3

R

FI, Chain Drive, Roller Lifter, Mini Vans, Det Sensor on Right Side, Chrysler

134900 134910 4621944 4483564 4621510

1995-93 181 3.0

3.59 3

V6, OHC, FWD, F.I., EFA-Eng., Main Caps One Assembly

457400 457410* T3A,T3B,T3E

33181

1994-90 181 3.0

3.59 RWD, OHC, Roller Rockers, Main Caps All One Assembly, Raider

457300 457310* 9107D2 6G72

T3A,T3B,T3E

33181

1994-90 181 3.0

3.59 RWD, OHC, Roller Rockers, Main Caps All One Assembly, Ram & D50

457300 458010* 9107D2 6G72

T3A,T3B,T3E

33181

* Do not come with oil pump or kit.


Year

CID Lit.

Bore Vin#

Description

Short Block

Complete

Block Casting

Crank Forging

Head Casting

Crank Kit No.

18

DODGE 4 & 6 CYLINDER TRUCK & INDUSTRIAL "OHV" & "OHC" Continued SEE NOTE AT END OF SECTION 1992-88 181

3.0 3.59

3 V6, OHC, FWD, Roller Rockers, Main Caps One Assembly

459900 459910* 33181

1988-87 181 3.0

3.59 3

V6, OHC, FWD, Flat Rockers, After 10-87

459700 459710* 41 8713N3

T3A T3B T3E

794600203F

33181

1987 181 3.0

3.59 3

V6, OHC, FWD, Flat Rockers, Before 10-87

459600 459610* 33180

1990-88 156 2.6

3.586 E

2600cc, OHC, RWD, W/Air Jet Valve, Hyd. Valve Adj., Dakota, D-50, Raider

457100AC 457110ABC* 33111C

1990-88 156 2.6

3.586 H

2600cc, OHC, RWD, W/Air Jet Valve, Turbocharged, Hyd. Valve Adjusters

457200AC 457210ABC* G54 33111C

1989-85 156 2.6

3.586 G

2600cc, OHC, FWD, W/7/8" Shaft out Rear of Valve Cover, W/O Air Jet Valves, Mech. Valve Adj., W/O Vent Tube on Side of Block

459400AB 459410AB* G54 G54 33111B

1988-86 156 2.6

3.586 E

2600cc, OHC, RWD, W/Air Jet Valve, Hyd. Valve Adj.

458500AC 458510ABC* G54 33111C

1987-84 156 2.6

3.586 G

2600cc, OHC, RWD, W/Air Jet Valve

458800AC 458810ABC* G54 33111C

1987-84 156 2.6

3.586 G

2600cc, OHC, RWD, W/Air Jet Valve

458900AC 458910ABC* G54 33111C

1985-84 156 2.6

3.586 G

2600cc, OHC, FWD, W/7/8" Shaft out Rear of Valve Cover, W/O Air Jet Valves, With 2 Vent Tubes on Side of Block

459000AB 458310AB* G54 G54 33111B

1985-84 156 2.6

3.586 G

2600cc, OHC, FWD, W/7/8" Shaft out Rear of Valve Cover, W/O Air Jet Valves, With 1 Vent Tube on Side of Block

459200AB 459210AB* G54 G54 33111B

1983-81 156 2.6

3.586 2600cc, OHC, RWD, W/Air Jet Valve

458700AC 458710ABC* G54 33111C

1980-79 156 2.6

3.586 W

2600cc, OHC, RWD, Bell Hsg. Dowel Pins are 12 1/2" Between Centers

457700AC 457710ABC* 33111C

1995-89 153 2.5

3.445 G

2500cc, OHC, RWD, F.I., Roller Rockers, W/O Bal. Assembly, Dakota

135400 135410* 4315730 4448486 4105782 23141

1993-91 153 2.5

3.445 G

2500cc, OHC, RWD, Roller Rockers, W/O Bal. Assembly, Dakota

135800 135810* 23141

1993 153 2.5

3.41 W

2400cc, OHC, F.I., Specify if 2 or 4 W.D.

453900 453910* 23149

1992-91 153 2.5

3.445 K

2500cc, OHC, FWD, Roller Rockers, W/Bal. Assembly, Caravan, Voyager, Mini Ram Van

222900 222910* 23142

1990-89 153 2.5

3.445 J

2500cc, OHC, FWD, Roller Rockers, W/Bal. Assembly, Turbocharged, Caravan, Voyager, Mini Ram Van

225100 225110* 4315730 4448486 4105782 23143

A - Bottom two bell housing bolt holes are straight off the oil pan rail. Specify if the bottom two bell housing bolt holes on block are 12 1/2" or 13 1/2" center to center. B - Specify if semi-circle opening in front of head along valve cover rail measures 1 5/16" or 2 1/8" across. C - Specify if for automatic transmission or standard transmission. Automatic transmission has bushing in rear of crankshaft forming centering ring. Standard transmission does not use the bushing and rear of crankshaft is flat. * Do not come with oil pump or kit.


Year

CID Lit.

Bore Vin#

Description

Short Block

Complete

Block Casting

Crank Forging

Head Casting

Crank Kit No.

19

DODGE 4 & 6 CYLINDER TRUCK & INDUSTRIAL "OHV" & "OHC" Continued SEE NOTE AT END OF SECTION 1995-89 153

2.5 3.445

K 2500cc, OHC, FWD, Roller Rockers, W/Bal. Assembly, Caravan, Voyager, Mini Ram Van

222900 222910* 4556030 4315730

4448486 4105782 23142

1988 153 2.5

3.445 G

2500cc, OHC, RWD, F.I., Roller Rockers, W/O Bal. Assembly, Dakota

135200 135210* 4448486 4105782 23145

1988 153 2.5

3.445 K

2500cc, OHC, FWD, Roller Rockers, W/Bal. Assembly, 5 Bolt Front Pulley

224900 223110* 4273232 4105782 23140

1993 143 2.4

3.41 W

2400cc, OHC, F.I., Specify if 2 or 4 W.D.

453900 453910 4G64 4G64B

33162

1992-90 143 2.4

3.41 W

2400cc, OHC, F.I., Specify if 2 or 4 W.D., Ram, Raider, Ram 50

454200 454210 4G64 4G64B

33161

1988 135 2.2

3.445 C

2200cc, OHC, RWD, Roller Rockers, 8 Hole Crank Flange, Pilot Hole in Crank Must be 1.300" Deep, Dakota

135100 135310* 4343834 5214990 4105782 23126

1988 135 2.2

3.445 8

2200cc, OHC, FWD, Roller Rockers, 8 Hole Crank Flange, Pilot Hole in Crank Must be .985" Deep

221100 221410* 4343834 4343830 4343930

5214990 4105782 23138

1987-86 135 2.2

3.445 C

2200cc, OHC, RWD, 11mm Head Bolts, 8 Hole Crank Flange, Pilot Hole in Crank Must be 1.300" Deep, Dakota

135100 135110* 4343834 5214990 4105782 23126

1987-86 135 2.2

3.445 8

2200cc, OHC, FWD, F.I., W/O Roller Rockers, 8 Hole Crank Flange, Pilot Hole in Crank Must be .985" Deep

221100 221110* 4343834 4343830 4343930

5214990 4105782 23138

1987-86 135 2.2

3.445 8

2200cc, OHC, FWD, Carbureted, 8 Hole Crank Flange, Pilot Hole in Crank Must be .985" Deep

220800 220810* 4343830 5214990 4105782 23138

1985 135 2.2

3.445 F

2200cc, OHC, FWD, 10mm Head Bolts, 6 Hole Crank Flange

224000 224010* 4298430 5214738 4323287 23116

1984-83 135 2.2

3.445 2200cc, OHC 221800 221910* 4105730 5214738 4105445 23116

1982-81 135 2.2

3.445 2200cc, OHC 221800 221810* 5203630 5214738 5203655 23116

1991-90 122 2.0

3.346 V

2000cc, OHC, Belt Drive Dual Bal. Assembly

456700 456710* 4G63 4G63B

63GC 63GU

33157

1989-88 122 2.0

3.346 V

2000cc, OHC, Belt Drive Dual Bal. Assembly

456600 456610* 4G63 4G63B

63GC 63GU

33157

1987 122 2.0

3.346 D

2000cc, OHC, Belt Drive 456400 456410* 4G63 4G63B

63GC 63GU

33157

1986-85 122 2.0

3.346 D

2000cc, OHC, Belt Drive 456100 456110* 4G63 33157

1984-83 122 2.0

3.346 5

2000cc, OHC, Belt Drive 456000 456010* 4G63 63GC 63GU

33157

1982-80 122 2.0

3.31 5

2000cc, OHC, W/Air Jet Valve 455600 455610* G52B G52 33106

1979-78 122 2.0

3.31 U

2000cc, OHC, W/Air Jet Valve, Bell Housing Dowel Pin Holes are 12 1/2" Between Centers

455400 455510* G52 33106

1978-76 122 2.0

3.31 2000cc, OHC, W/O Air Jet Valve, Bell Housing Dowel Pin Holes are 13 1/2" Between Centers

455200 455210* G52 33105

1978-76 122 2.0

3.31 2000cc, OHC, W/Air Jet Valve, Bell Housing Dowel Pin Holes are 13 1/2" Between Centers

455200 455310* G52 33105

NOTE: Engines with A.I.R., Smog order from factory. * Do not come with oil pump or kit.


Year

CID Lit.

Bore Vin#

Description

Short Block

Complete

Block Casting

Crank Forging

Head Casting

Crank Kit No.

20

DODGE V8 TRUCK & INDUSTRIAL SEE NOTE AT END OF SECTION 1997-94 488

8.0 V10, OHV, RWD, Roller Lifter,

Trigger Fire Ign, Cast Iron 229700 229710 53041095 53005840 53005854

1984-73 440 7.2

4.32 Forged Crankshaft XX 228519 AB 4006630 2206160 3751213 3462346

23131A

1980-73 440 7.2

4.32 Cast Shaft, Specify if Auto. or Std. Transmission

226700A 226710AB 4006630 8698461 4027175 3751888

4006452 3769975 3462346

23148A

1980-73 440 7.2

4.32 Forged Shaft, Specify if Auto. or Std. Transmission

226800A 226810AB 4006630 2206160 4006452 3769975 3462346

23131A

1977-71 413 6.8

4.188 D

413-3, Stamped "R", Chain Drive, 8 Hole Threaded Crankshaft Flange

139400 139410 2120529 2205697 2468030

1851436 2206158

2899943 2466676 2264547

23134

1977-71 413 6.8

4.188 D

413-3, Chain Drive, 6 Hole Threaded Crankshaft Flange

137000 137010 2120529 2658836 2468030

2206160 2899943 2466676 2264547

23131

1977-71 413 6.8

4.188 D

413-3, Gear Drive, 6 Hole Threaded Crankshaft Flange

137100 137110 2120529 2205697 2468030

2206160 2899943 2466676 2264547

23131

1971-60 413 6.8

4.188 Gear Drive, 8 Hole Threaded Crankshaft Flange

138200 138210 2120529 2205697 2468030

1851436 2206158

2899913 2264547

23134

1980-73 400 6.6

4.34 J

Forged Shaft, Specify if Auto. or Std. Transmission

226600A 226610A 3698630 4006530

2206159 4006452 3769975 3462346

23128A

1980-73 400 6.6

4.34 J

Cast Shaft, Specify if Auto. or Std. Transmission

226900A 226910A 3698630 4006530

3462923 3751877

4006452 3769975 3462346

23144A

1971-67 383 6.3

4.25 J

2 B.C. 133700A 131910A 2468130 2206159 2843906 23128A

1978-72 361 5.9

4.125 361-4, Chain Drive, 8 Hole Threaded Crankshaft Flange

139900B 139910B 2205712 2129229 2899830 4006762 2658930

2206157 2899943 2466676 2264547

23127

1978-72 361 5.9

4.125 361-4, Chain Drive, 6 Hole Threaded Crankshaft Flange

137500B 137510B 2205712 2129229 2899830 4006762 2658930

2206159 2899943 2466676 2264547

23128

1975-72 361 5.9

4.125 361-3, Gear Drive, 6 Hole Threaded Crank Flange

137400B 137410B 2205712 2129229 2899830 4006762 2658930

2206159 2899943 2466676 2264547

23128

1971-60 361 5.9

4.125 Gear Drive, 8 Hole Threaded Crank Flange

138800 138810 1737629 1944929 2129229 2205712 2899830

2206157 1851524 2202594 2406740

23127

1997-94 360 5.9

4.00 5

OHV, Roller Tappets, Heavy Duty Cooling

229600 229610 53020006 3418640 4027169

53006671 5302044

23124

1997-92 360 5.9

4.00 Z

Roller Tappets, Bolt Down Rockers

229300 229313 53020006 53006921

3418640 4027169

4448308 4343646

23129

1993-92 360 5.9

4.00 5

Flat Tappets, H.D. Cooling 229500 229513 53020006 53009714

3418640 53006671 23129

1991-89 360 5.9

4.00 Z

Roller Tappets 229200 229213 4027169 3418640

23124

A- To identify cast or forged crankshafts, see drawing on page 16. B - Engine can be identified by letters designated as shown in quote marks. This letter is the fourth alpha on the model serial plate. The engine will also be stamped with numbers (Example: 361-2). This number may be stamped on pad of engine block at front of head surface.


Year

CID Lit.

Bore Vin#

Description

Short Block

Complete

Block Casting

Crank Forging

Head Casting

Crank Kit No.

21

DODGE V8 TRUCK & INDUSTRIAL Continued SEE NOTE AT END OF SECTION 1990-89 360

5.9 4.00

Z Roller Tappets 225200 225213B 4315830

53006921 4027169 3418640

4323352 4343923 4343646 4448308

23124

1989-75 360 5.9

4.00 I/W/S

All Trucks, Vans (Inc. 1978-76 D500, 600), 14mm Spark Plugs W/A.I.R. ORDER 225613 W/LP Gas ORDER 225612 W/LP Gas & AIR 225614

226500 225610B 4045601 4006830 4179930 4315830

4027169 3418995 3418640

4071051 4027596 3769974 3671587 4343475 4323345 4343805

23124

1974-71 360 5.9

4.00 Y/H

223600 224610B 3418496 3870230

3418640 3418915 23124

1997-94 318 5.2

3.91 Y

Roller Tappets, Dakota, W/Side Center Motor Mounts

228200 228210 53006657 53006714

3751841 3462387 2658393

53006671 53020466

23135

1998-92 318 5.2

3.91 Y

Roller Tappets, B-Body Vans, Pickup, 1500 Ram

228700 228710 53006714 53006657

3751841 53006671 53020466

23135

1998-92 318 5.2

3.91 Y

Roller Tappets, Dakota, W/Side Center Motor Mounts

228100 228110 53006714 3751841 3462387 2658393

53006671 23135

1993-92 318 5.2

3.91 Y

F.I., Roller Tappets 228300 228310 53006714 53006657

3751841 53006671 23135

1992 318 5.2

3.91 Y

S.F.I., Roller Tappets 228300 228313 53006714 3751841 23133

1991-90 318 5.2

3.91 Y

Roller Tappets, Dakota, W/Side Center Motor Mounts

228000 228013 4387560 53006657

3751841 3462387 2658393

53005714 23135

1991-88 318 5.2

3.91 Y

Roller Tappets 227200 227213 53006714 4323330 4387560

3751841 3462387 2658393

4323302 53005714

23135

1991-88 318 5.2

3.91 Y

Roller Tappets 225900 225913B 4323330 4387560

3751841 3462387 2658393

4323302 4343646

23135

1989-85 318 5.2

3.91 T

Flat Tappets 220300 226013B 4323330 3751841 3462387 2658393

4323302 4343646

23135

1984-80 318 5.2

3.91 P/R

Mtg. Bolt for Brace from Trans. Bell Housing to Engine Block is 10" on Left Side From Rear of Block LP Gas ORDER 226014

220300A 226013AB 4179730 4104230

3462387 2658393

4027593 4027163

23135

1984-68 318 5.2

3.91 P/E

Mtg. Bolt for Brace from Trans. Bell Housing to Engine Block is 9" on Left Side From Rear of Block W/A.I.R. ORDER 220713 W/LP Gas 220712 W/LP Gas & AIR 220714

226200A 220710AB 4006730 4104230 4179730

3751841 3462387 2658393

4027163 3769973 3671585 4027593 3751851

23135

A - Specify if standard or automatic transmission. B - Check picture on page 23 for correct cylinder head identification.


Year

CID Lit.

Bore Vin#

Description

Short Block

Complete

Block Casting

Crank Forging

Head Casting

Crank Kit No.

22

DODGE V8 TRUCK & INDUSTRIAL Continued SEE NOTE AT END OF SECTION 1978-70 318

5.2 3.91

E Water Heated Intake Manifold 226200 223510B 4006730

4179730 3751841 3462387 2658393

2658234 3870277 2658416

23135

1975 318 5.2

3.91 E

W/AIR 227313 W/LP Gas 227312 W/LP & AIR 227314

226200A 227310A 2536030 2806030

2843868 2128869

3769973 3671585 4027593

23121

1974-67 318 5.2

3.91 E

Rear Sump Pan 226200A 224810A 2536030 2843868 2128869

2658920 2843675

23121

NOTE: Engines with A.I.R., Smog order from factory. NOTE: Information on 1967-57, 318; 1972, 400; Dodge Truck Engines can be found in the Miscellaneous Listing on page 101 & 102. NOTE: No timing components or oil pumps supplied with 4 and 6 cylinder engines, excluding 225 slant 6 and timing components on 3.9L V6. A - Specify if standard or automatic transmission. B - Check picture on page 23 for correct cylinder head identification. C - Casting #53006671 has bolt down rockers, engine oils through push rods.


Year

CID Lit.

Bore Vin#

Description

Short Block

Complete

Block Casting

Crank Forging

Head Casting

Crank Kit No.

23

318 & 360 Head Identification

Air Cooled Intake Manifold

Water Heated Intake Manifold - 318 Only

Exhaust Manifold Side - 1974-67, 318-360 Dodge

1990-75, 318-360 Dodge W/O A.I.R.(Smog)

1990-75, 318-360 Dodge W/A.I.R.(Smog)