21
Chemicals Technical Data Sheet Products that enrich the world Chemicals | Polymers | Fertilisers METHANOL (MeOH) METHYL TERTIARY-BUTYL ETHER (MTBE) LINEAR ALKYL BENZENE (LAB) HEAVY ALKYL BENZENE (HAB) CAUSTIC SODA (CSS) ETHYLENE DICHLORIDE (EDC) VINYL CHLORIDE MONOMER (VCM) HYDROCHLORIC ACID (HCL) NORMAL ALPHA OLEFINS – (NAO) PYROLYSIS GASOLINE – (PYGAS) ETHYLENE SULPHURIC ACID

Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

Embed Size (px)

Citation preview

Page 1: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

Chemicals Technical Data Sheet

Products that enrich the worldChemicals | Polymers | Fertilisers

METHANOL (MeOH)

METHYL TERTIARY-BUTYL ETHER (MTBE)

LINEAR ALKYL BENZENE (LAB)

HEAVY ALKYL BENZENE (HAB)

CAUSTIC SODA (CSS)

ETHYLENE DICHLORIDE (EDC)

VINYL CHLORIDE MONOMER (VCM)

HYDROCHLORIC ACID (HCL)

NORMAL ALPHA OLEFINS – (NAO)

PYROLYSIS GASOLINE – (PYGAS)

ETHYLENESULPHURIC ACID

Page 2: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

03| INTRODUCTION

07| METHANOL (MeOH)

08| METHYL TERTIARY-BUTYL ETHER (MTBE) 09| LINEAR ALKYL BENZENE (LAB)

10| HEAVY ALKYL BENZENE (HAB)

11| CAUSTIC SODA (CSS)

12| ETHYLENE DICHLORIDE (EDC)

13| VINYL CHLORIDE MONOMER (VCM)

14| HYDROCHLORIDE ACID (HCL)

15| NORMAL ALPHA OLEFINS (NAO)

29| PYROLYSIS GASOLINE (PYGAS)

31| ETHYLENE

32| SULPHURIC ACID

34| MUNTAJAT B.V. GLOBAL NETWORK

CONTENTS

www.muntajat.qa

01

Page 3: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

INTRODUCTION

About Muntajat Muntajat, (Qatar Chemical and Petrochemical Marketing and Distribution Company) Q.J.S.C. is a state-owned company established in 2012 in the world’s emerging chemicals and petrochemicals hub, Qatar. Muntajat is the gateway to Qatar’s exports of over 10 million tonnes of chemicals and petrochemicals products. The company markets, sells and distributes 100% of the State’s downstream exports to customers in more than 120 countries.

The company aims to represent, serve and promote the State of Qatar’s chemicals, polymers and fertilisers and maximise value for its stakeholders by providing the world-class products and services customers need to maintain their competitive advantage.

Muntajat is working towards achieving Qatar’s 2030 Vision by contributing to social, human, economic and environmental development and the creation of a diversified knowledge-based economy.

The company builds on more than 40 years of excellence by Qatar’s producing entities. It is adding new value to the supply chain through reduced lead times and enhanced customer experience while retaining continuity of supply and world-class quality that customers demand.

Muntajat is currently developing a strong footprint across the globe, through its international marketing network, Muntajat BV, which is headquartered in the Netherlands and spread in 18 countries around the world.

With vast resources, world-class products and a dedicated team of experts, Muntajat guarantees reliability and quality to its global customers.

Aligned with Qatar National

Vision 2030’s aim to develop

a competitive and diversified

economy, Muntajat serves as a

gateway for the State of Qatar’s

chemical and petrochemical

industries, by consolidating

marketing and distribution efforts

into a single entity to meet the

needs of customers worldwide.

0302

Page 4: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

Chemicals

Industrial Chemicals are essential building blocks

of the modern world. Hundreds of industries all

over the world depend on a steady supply of high-

quality industrial chemicals to produce the goods

and services that humankind uses every day.

05

Page 5: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

METHANOL

Methanol is a clear, colourless, flammable liquid with a characteristic odour. It is a clean energy source as well as a raw material for some of the everyday items used by us.Within the petrochemical industry, Methanol is used as a raw material in the manufacturing of solvents, Formaldehyde, Methyl Amine, Acetic Acid, Ethyl Alcohol, Acetic Anhydride, DME and MTBE.

Our Methanol is produced by QAFAC which has a production capacity of 982,350 MTPA of US Federal Grade AA Methanol using ICI Technology.

Produced by: Qatar Fuel Additives Company (QAFAC).

CHARACTERISTICS LIMITS METHOD

Purity, % wt on dry basis Min 99.85 IMPCA 001

Acetone, mg/kg Max 30 IMPCA 001

Acidity as acetic acid, mg/kg Max 30 ASTM D 1613

Carbonisable Substances, Pt-Co scale Max 30 ASTM E 346

Color , Pt-Co Max 5 ASTM D1209

Distillation Range at 760 mm Hg Max 1.0° C to

include 64.6° ± 0.1° C

ASTM D 1078

Ethanol, mg/kg Max 50 IMPCA 001

Non Volatile matter, mg/1000ml Max 8 ASTM D 1353

Potassium Permanganate Time test at 15°C, minutes

Min 60 ASTM D 1363

Specific Gravity at 20°/20° C 0.791 - 0.793 ASTM D 4052

Water, % w/w Max 0.1 ASTM E 1064

Total Iron, mg/kg Max 0.1 ASTM E394

Chloride as Cl -, mg/kg Max 0.5 IMPCA 002

Sulfur, mg/kg Max 0.5 ASTM D 4045

Hydrocarbons Pass test ASTM D 1722

AppearanceClear & Free of

suspended matterIMPCA 003

07

Page 6: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

METHYL TERTIARY-BUTYL ETHER (MTBE)

Methyl Tertiary-Butyl Ether (MTBE) is a colourless flammable liquid with a characteristic odour and an average octane number of 108. It is used as a gasoline additive that provides cleaner burning fuel to reduce the tail gas pollution generated by motor vehicles whilst also eliminating the need to add Tetra Ethyl Lead to the gasoline.Qatar Fuel Additives Company (QAFAC) produces 1,830 metric tonnes per day of high quality MTBE by processing field butane, supplied by Qatar Petroleum and methanol, produced by QAFAC’s own on-site plant.

Current Capacity: 610,000 MTPAProduced by: Qatar Fuel Additives Company (QAFAC)

PARAMETERS UNITS SPECIFICATION METHOD

MTBE wt% 98.0 min. ASTM D 5441

C4 Hydrocarbons wt% 0.5 max ASTM D 5441

Methanol wt% 0.7 max ASTM D 5441

TBA (Tertiary butyl alcohol) wt% 0.6 max ASTM D 5441

Di-isobutylene and Codimers wt% 1.0 max ASTM D 5441

C5 Hydrocarbons wt% 1.0 max ASTM D 5441

Water ppm wt 500 max ASTM E 1064

LINEAR ALKYL BENZENE (LAB)

Linear Alkyl Benzene (LAB) is a family of organic compounds with the formula C6H5CnH2n+1. Since the 1960s, LAB has emerged as the dominant precursor in biodegradable detergents, in particular laundry detergents, dishwashing

liquids, industrial cleaners, and household cleaners. The superior product

quality of SEEF LAB leads to High Sulfonability, improved Surfactant properties and excellent detergent performance which ultimately enhances customer profitability.

Quality: High Linearity (> 92 wt.), low Bromine Index (<10), low Di Alkyl Tetralins & Indanes content (<1 wt %).

Current Capacity: 100,000 MTPAProduced by: SEEF Limited

TEST TEST METHOD SPECIFICATION

Specific Gravity, 15.56°C ASTM D-4052 0.855-0.870

Bromine Index UOP-304 10 max.

Say Bolt Color ASTM D-6045 + 29min.

Water, wt% UOP 481 0.05 max.

2 Phenyl alkane, wt% UOP 673 25 min.

Di Alkyl tetralins and Indanes, wt% UOP 929 1.0 max.

Appearance Visual Clear

Linear Alkyl Benzene, wt% UOP 673 92 min.

Paraffins,wt% UOP 673 0.5 max.

Molecular weight UOP 673 236-244

Carbon Chain length distribution

Wt% typical range:

≤C9 UOP 673 1.0 max.

C10 UOP 673 5 - 15

C11 UOP 673 25 - 45

C12 UOP 673 25 - 45

C13 UOP 673 10 - 30

≥C14 UOP 673 1.0 max.

Doctor test UOP 41 Negative

0908

Page 7: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

HEAVY ALKYL BENZENE (HAB)

Heavy Alkyl Benzene (HAB) or Heavy Alkylate is used in manufacture of lube oil, thermic fluids, refrigeration oil, electrical oil & textile auxiliaries.

Sodium and Calcium Sulphonated Derivatives of Heavy Alkylate are reckoned for high shelf life, are stable under different climatic conditions and work as surface active agents.

HAB manufactured by SEEF commands a market premium due to its consistent and superior quality.

Current Capacity: 3,500 MTPAProduced by: SEEF Limited

TEST TEST METHOD SPECIFICATION

Specific Gravity, 15.56°C ASTM D-4052 0.86 - 0.98

ASTM Color ASTM D-6045 4.0 max

Kinematic Viscosity @ 50°C, cSt ASTM D-445 12 - 18

Kinematic Viscosity @ 38°C, cSt ASTM D-445 21 - 28

CAUSTIC SODA

Caustic soda is a solution of Sodium hydroxide (NaOH) in water. It is used in many industries such as alumina as a strong chemical base, and also in the manufacture of pulp and paper, textiles, drinking water, soaps and detergents as well as a drain cleaner.

Caustic Soda - produced as 50% wt solutionQuality: membrane grade caustic soda (< 100 ppmwt. NaCl) Current Capacity: 730,000 MTPA

Produced by: Qatar Vinyl Company (QVC)

PARAMETER UNIT VALUE

Appearance Colorless, water white, soapy liquid

Sodium Hydroxide %w/w 49.0 - 51.0

Sodium Carbonate Ppm max. 500

Sodium Sulphate Ppm max. 100

Sodium Chloride Ppm max. 100

Sodium Chlorate Ppm max. 30

Iron Ppm max. 3

Silica Ppm max. 5

1110

Page 8: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

ETHYLENE DICHLORIDE (EDC)

Ethylene Dichloride (EDC) is a chlorinated hydrocarbon that is mainly used to produce Vinyl Chloride Monomer (VCM), the major precursor for PVC production. It is a colourless liquid with a chloroform-like odour. EDC is also used as an intermediate for other organic chemical compounds and as a solvent.

Physical Appearance: Colourless Quality: High purity (99.9% wt., < 300 ppm wt. Low boils, <660ppm wt. High boils, <10 ppm wt. water)

Current Capacity: 180,000 MTPAProduced by: Qatar Vinyl Company (QVC)

PARAMETER UNIT COMMERCIAL SPECIFICATION

EDC % weight min 99.9

Water mg/kg max 150

Color Apha max 10

Acidity (as HCl) mg/kg max 5

Iron mg/kg max 1

Total Low Boilers mg/kg max 300

Total High Boilers mg/kg max 600

Non-Volatile Residue wt ppm max 15

VINYL CHLORIDE MONOMER (VCM)

Vinyl Chloride Monomer (VCM) is produced by cracking Ethylene DiChloride (EDC).Nearly all VCM is converted into PVC or vinyl copolymers. PVC is among the largest volume plastics produced around the world, widely used in the manufacture of products in the construction, medical, automotive, electronics and packaging industries.

Quality: High Purity (99.98% wt. < 10 ppm wt. 1-3-butadiene)Current Capacity: 350,000 MTPA

Produced by: Qatar Vinyl Company (QVC)

PARAMETER UNIT VALUE

VCM wt. % min 99.98

1,3 Butadiene wt ppm max 10

Acetylene wt ppm max 2

Methyl Chloride wt ppm max 100

Ethyl Chloride wt ppm max 50

Mono Vinyl Acetylene wt ppm max 8

1-2 EDC wt ppm max 2

Acetaldehyde wt ppm max 1

H2O wt ppm max 100

Iron wt ppm max 0.4

Acidity as HCl wt ppm max 1

Non Volatile Matters wt ppm max 50

Peroxydes as O2 wt ppm max 1

Hydroquinone wt ppm mini / max 2/5

Colour Colourless

Appearance Clear and free of suspended matters

1312

Page 9: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

HYDROCHLORIC ACID (HCL)

Hydrochloric acid (HCl) is a colourless to yellowish-green, clear corrosive liquid with a pungent, irritating odour. It is completely soluble in water and HCl gas mixed with water generate a violent exothermique reaction. Contact with most metals results in the formation of flammable hydrogen gas. HCl is used in numerous applications from water treatment to food processing.

Current Capacity: 26,000 MTPAProduced by: Qatar Vinyl Company (QVC)

COMPONENT SPECIFICATION UNIT

HCl 32 +/- 1 %

Specific Gravity at 20 °C 1.152-1.167 Kg/l

Cl2 <5 ppm

Fe <10 ppm

SO4 <3.5 g/l

Colour Pale Yellowish

NORMAL ALPHA OLEFINS (NAO)

Normal Alpha Olefins are linear hydrocarbons having highly accessible Terminal double bonds which make them ideal materials for manufacturing numerous products. Under licensed from Chevron Phillips Chemical Co. Ltd., and sold under the brand name AlphaPlus®, these NAO products are used extensively to manufacture common household and personal care consumer goods such as plastics, liquid soaps, sunscreen, detergents, synthetic lubricants, adhesives, drilling fluids, high quality paper products, and a wide range of other items. With product range from C4 to C30+ carbon lengths, they can be put to unlimited use in the development of new chemical products.

At ambient conditions, C4 is a gaseous product and C6 through C18 are clear water-white liquids with a distinctive olefinic odor. The C20+ products are solid at room temperature and have a waxy appearance.

Current Capacity:47,000 MTPA (Q-Chem On-purpose C6); 350,000 MTPA (Q-Chem II NAO Full Range)Produced by: Qatar Chemical Company Ltd (Q-Chem)Qatar Chemical Company II Ltd (Q-Chem II)

NAO products include;

1514

Page 10: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

• 1-Hexene (C6H12)

SPECIFICATIONCHARACTERISTICS METHOD UNIT Min Max

1-Hexene ASTM D5134 wt. % 99.0 -

<C6 ASTM D5134 wt. % - 0.05

C6 ASTM D5134 wt. % 99.8 -

>C6 ASTM D5134 wt. % - 0.08

Vinylidene ASTM D5134 wt. % - 1.00

cis- and trans- 2-Hexene

ASTM D5134 wt. % - 1.00

Paraffin ASTM D5134 wt. % - 0.34

Benzene PPCO-8704-AG ppm by wt - 0.20

Water ASTM E1064 ppm by wt - 25.0

Peroxide ASTM E 299 ppm by wt - 1.00

Carbonyls ASTM E 411 ppm by wt - 1.00

Color ASTM D 6045 Saybolt 30 -

Appearance ASTM D 4176 -Bright and

Clear-

API Gravity @ 60˚F * ASTM D 4052 - - -

Specific Gravity @ 60˚F/ 60˚F *

ASTM D 4052 - - -

* Determine and ReportApplication: Comonomer PE, Plasticizers, Silanes, Silicones

• 1-Butene (C4H8)

SPECIFICATIONCHARACTERISTICS METHOD UNIT Min Max

1-Butene GLC wt. % 99.0 -

C4 GLC wt. % 99.8 -

>C4 GLC wt. % - 0.05

cis-and trans-2-Butene GLC wt. % - 0.34

Paraffin GLC wt. % - 0.34

Water Ametek 5800 ppm by wt - 10.0

Diene * GLC ppm by wt - -

* Determine and ReportApplication: Comonomer PE, PP, Butylene Oxide

1716

Page 11: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

• 1-Octene (C8H16)

SPECIFICATIONCHARACTERISTICS METHOD UNIT Min Max

n-Alpha Olefin GLC wt. % 97.0 -

<C6 GLC wt. % - 0.05

C6 GLC wt. % - 0.50

C8 GLC wt. % 99.0 -

C10 GLC wt. % - 0.50

>C10 GLC wt. % - 0.05

Vinylidene GLC wt. % - 2.20

cis- and trans-2-Octene

GLC wt. % - 0.34

Paraffin GLC wt. % - 0.34

Water ASTM E 1064 ppm by wt - 50.0

Peroxide ASTM E 299 ppm by wt - 1.00

Carbonyls ASTM E 411 ppm by wt - 1.00

Color ASTM D 6045 Saybolt 30 -

Appearance ASTM D 4176 -Bright and

Clear-

API Gravity @ 60˚F * ASTM D 4052 - - -

Specific Gravity @ 60˚F/ 60˚F *

ASTM D 4052 - - -

* Determine and ReportApplication: Comonomer PE, Plasticizers, Silanes, Silicones

• 1-Decene (C10H20)

SPECIFICATIONCHARACTERISTICS METHOD UNIT Min Max

n-Alpha Olefin GLC wt. % 95.8 -

<C8 GLC wt. % - 0.05

C8 GLC wt. % - 1.00

C10 GLC wt. % 98.5 -

C12 GLC wt. % - 1.00

>C12 GLC wt. % - 0.05

Vinylidene GLC wt. % - 3.60

cis- and trans-2-Decene

GLC wt. % - 0.34

Paraffin GLC wt. % - 0.34

Water ASTM E 1064 ppm by wt - 100

Color ASTM D 6045 Saybolt 30 -

Appearance ASTM D 4176 -Bright and

Clear-

API Gravity @ 60˚F * ASTM D 4052 - - -

Specific Gravity @ 60˚F/ 60˚F *

ASTM D 4052 - - -

* Determine and ReportApplication: Synthetic Lubricants, Fragrances

1918

Page 12: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

• 1-Dodecene (C12H24)

SPECIFICATIONCHARACTERISTICS METHOD UNIT Min Max

n-Alpha Olefin GLC wt. % 94.6 -

<C10 GLC wt. % - 0.05

C10 GLC wt. % - 1.00

C12 GLC wt. % 98.0 -

C14 GLC wt. % - 2.00

>C14 GLC wt. % - 0.05

Vinylidene GLC wt. % - 4.20

cis- and trans-2-Dodecene

GLC wt. % - 0.34

Paraffin GLC wt. % - 0.34

Water ASTM E 1064 ppm by wt - 100

Color ASTM D 6045 Saybolt 30 -

Appearance ASTM D 4176 -Bright and

Clear-

API Gravity @ 60˚F * ASTM D 4052 - - -

Specific Gravity @ 60˚F/ 60˚F *

ASTM D 4052 - - -

* Determine and ReportApplication: Synthetic Lubricants, Fragrances

• 1-Tetradecene (C14H28)

SPECIFICATIONCHARACTERISTICS METHOD UNIT Min Max

n-Alpha Olefin GLC wt. % 93.4 -

<C12 GLC wt. % - 0.05

C12 GLC wt. % - 1.00

C14 GLC wt. % 98.0 -

C16 GLC wt. % - 2.00

>C16 GLC wt. % - 0.05

Vinylidene GLC wt. % - 5.40

cis- and trans-2-Tetradecene

GLC wt. % - 0.34

Paraffin GLC wt. % - 0.34

Water ASTM E 1064 ppm by wt - 100

Color ASTM D 6045 Saybolt 30 -

Appearance ASTM D 4176 -Bright and

Clear-

API Gravity @ 60˚F * ASTM D 4052 - - -

Specific Gravity @ 60˚F/ 60˚F *

ASTM D 4052 - - -

* Determine and ReportApplication: Synthetic Lubricants, Detergents, Surfactants, Alcohol Ethoxylates, Linear Alkyl Benzene (LAB), Mercaptans

2120

Page 13: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

• 1-Hexadecene (C16H32)

SPECIFICATIONCHARACTERISTICS METHOD UNIT Min Max

n-Alpha Olefin GLC wt. % 92.2 -

<C14 GLC wt. % - 0.10

C14 GLC wt. % - 1.00

C16 GLC wt. % 97.5 -

C18 GLC wt. % - 2.00

>C18 GLC wt. % - 0.10

Vinylidene GLC wt. % - 6.50

cis- and trans-2-Hexadecene

GLC wt. % - 0.34

Paraffin GLC wt. % - 0.34

Water ASTM E 1064 ppm by wt - 100

Color ASTM D 6045 Saybolt 30 -

Appearance ASTM D 4176 -Bright and

Clear-

API Gravity @ 60˚F * ASTM D 4052 - - -

Specific Gravity @ 60˚F/ 60˚F *

ASTM D 4052 - - -

* Determine and ReportApplication: Alkenyl Succinic Anhydride (ASA), Functional Drilling Fluids, FoodAdditives, Leather Tanning Agents, Alpha Sulphonates

• 1-Octadecene (C18H36)

SPECIFICATIONCHARACTERISTICS METHOD UNIT Min Max

n-Alpha Olefin GLC wt. % 90.6 -

<C16 GLC wt. % - 0.10

C16 GLC wt. % - 1.00

C18 GLC wt. % 97.0 -

C20 GLC wt. % - 2.00

>C20 GLC wt. % - 0.10

Vinylidene GLC wt. % - 7.90

cis- and trans-2-Octadecene

GLC wt. % - 0.34

Paraffin GLC wt. % - 0.34

Water ASTM E 1064 ppm by wt - 100

Color ASTM D 6045 Saybolt 30 -

Appearance ASTM D 4176 -Bright and

Clear-

API Gravity @ 60˚F * ASTM D 4052 - - -

Specific Gravity @ 60˚F/ 60˚F *

ASTM D 4052 - - -

* Determine and ReportApplication: Synthetic Lubricants, Fragrances

2322

Page 14: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

• C20 – C24

SPECIFICATIONCHARACTERISTICS METHOD UNIT Min Max

<C18 GLC wt. % - 0.10

C18 GLC wt. % - 3.00

C20 GLC wt. % 35.0 55.0

C22 GLC wt. % 25.0 45.0

C24 GLC wt. % 10.0 26.0

C26 GLC wt. % - 2.00

>C26 GLC wt. % - 0.10

Water ASTM E 1064 ppm by wt - 100

Color ASTM D 6045 Saybolt 30 -

Appearance ASTM D 4176 -Bright and

Clear-

API Gravity @ 60˚F * ASTM D 287 - - -

Specific Gravity @ 60˚F/ 60˚F *

ASTM D 287 - - -

* Determine and ReportApplication: Petroleum Additive Industry, Sulfonate Based Detergents, Alkylated Phenols

• C24 – C28

SPECIFICATIONCHARACTERISTICS METHOD UNIT Min Max

<C22 GLC wt. % - 1.00

C22 GLC wt. % - 2.00

C24-C28 GLC wt. % 72.0 -

C30+ GLC wt. % - 25.0

Color ( Unfiltered )TE-LAB-

SOP-14-0007Saybolt 20.0 -

Appearance **TE-LAB-

SOP-14-0005- Pass -

API Gravity @ 60˚F * ASTM D 287 - - -

Specific Gravity @ 60˚F/ 60˚F *

ASTM D 287 - - -

Drop Melt Point * ASTM D 127 ˚F - -

* Determine and Report** Clear and substantially free of visual impuritiesApplication: Pour Point Depressant, Wood Treating

2524

Page 15: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

• C30+

SPECIFICATIONCHARACTERISTICS METHOD UNIT Min Max

<C22 GLC wt. % - 0.10

C22 GLC wt. % - 1.00

C24-C28 GLC wt. % - 18.0

C30+ GLC wt. % 82.0 -

Kinematic Viscosity @ 210 ˚F

ASTM D 445 cSt - 10.0

Color ( Unfiltered )TE-LAB-

SOP-14-0007Saybolt 0 -

Appearance **TE-LAB-

SOP-14-0005- Pass -

API Gravity @ 60˚F * ASTM D 287 - - -

Specific Gravity @ 60˚F/ 60˚F *

ASTM D 287 - - -

Drop Melt Point * ASTM D 127 ˚F 164 -

* Determine and Report** Clear and substantially free of visual impuritiesApplication: PVC Lubes, Fertilizer Coating, Oriented Strand Board

NAO Blends:• C14-C16-C18 Blend (23:44:33)

SPECIFICATIONCHARACTERISTICS METHOD UNIT Min Max

<C14 GLC wt. % - 0.30

C14 GLC wt. % 20.0 25.0

C16 GLC wt. % 40.0 46.0

C18 GLC wt. % 20.0 36.0

>C18 GLC wt. % - 5.0

Total n-Alpha Olefins

GLC wt. % 91.0 -

Total Mono-Olefins GLC wt % 99.0 -

Vinylidene GLC wt % - 9.0

cis- and trans 2-Tetradecene/ 2-Hexadecene/2-Octadecene

GLC wt % - 0.34

Paraffin GLC wt % 0.34

Water ASTM E 1064 ppm by wt - 100

Color ASTM D 6045 Saybolt - -

Appearance ASTM D 4176 - 30 -

API Gravity @ 60˚F * ASTM D 4052 -Bright and

Clear-

Specific Gravity @ 60˚F/ 60˚F *

ASTM D 4052 - - -

* Determine and Report

2726

Page 16: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

• C12-C14 Blend (67:33)

SPECIFICATIONCHARACTERISTICS METHOD UNIT Min Max

C12 GLC wt. % 65.0 69.0

C14 GLC wt. % Balance to 100

n-Alpha Olefin GLC wt. % 94.2 -

Vinylidene GLC wt % - 4.7

cis- and trans 2-Dodecene/ 2-Tetradecene

GLC wt % - 0.34

Paraffin GLC wt % - 0.34

Water ASTM E 1064 ppm by wt - 100

Color ASTM D 6045 Saybolt 30 -

Appearance ASTM D 4176 -Bright and

Clear-

API Gravity @ 60˚F * ASTM D 4052 - - -

Specific Gravity @ 60˚F/ 60˚F *

ASTM D 4052 - - -

* Determine and Report

• C14-C16 Blend (67:33)

SPECIFICATIONCHARACTERISTICS METHOD UNIT Min Max

< C12 GLC wt. % - 0.05

C12 GLC wt. % - 1.0

C14 GLC wt. % 65.0 69.0

C16 GLC wt. % 31.0 35.0

C18 GLC wt. % - 2.0

> C18 GLC wt. % 0.10

n-Alpha Olefin GLC wt. % 93.0 -

Vinylidene GLC wt % - 6.0

cis- and trans 2-Tetradecene/ 2-Hexadecene

GLC wt % - 0.34

Paraffin GLC wt % - 0.34

Water ASTM E 1064 ppm by wt - 100

Color ASTM D 6045 Saybolt 30 -

Appearance ASTM D 4176 -Bright and

Clear-

API Gravity @ 60˚F * ASTM D 4052 - - -

Specific Gravity @ 60˚F/ 60˚F *

ASTM D 4052 - - -

* Determine and ReportApplication: Common blends for different applications 2928

Page 17: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

PYROLYSIS GASOLINE - PYGAS

Pyrolysis Gasoline, a naphtha-range product with high aromatics content, is a by-product of ethylene production from ethane cracking. It is a yellow liquid with an aromatic, gasoline-like odor that is primarily used either as a source for recovering benzene and other hydrocarbons or for gasoline blending to boost octane.

Current Capacity: 40,000 MTPA

Produced by: Ras Laffan Olefins Company Ltd. (RLOC)

SPECIFICATIONCHARACTERISTICS METHOD UNIT TYPICAL Min Max

API Gravity @ 60 °F * ASTM D287 41.6

Specific Gravity @ 60 °F *

ASTM D4052/D1298 0.82

Bromine No. ASTM D1159 g/100g <1.0 1.0

Distillation 95%, deg C

ASTM D86/D3710 °C 195 205

Sulfur ASTM D5453/D7041 Wt ppm 0.69 1.0

RVP psia ASTM D6377 Psia 7.4

C5 & Lighter ASTM D6729/30 Wt% 15 - 29

Benzene ASTM D6729/30 Wt%32.0 -

48

Toluene * ASTM D6729/30 Wt% 4.5 -6.0

Thiophene (2) ASTM D6228/7011 Wt ppm 0.29

Color, Saybolt ASTM D156 Saybolt 29

* For information only

ETHYLENE

Ethylene is one of the building blocks of hydrocarbon and petrochemicals. It is a colorless flammable gas. Ethylene is widely used in chemical industry, and its worldwide production exceeds that of any other organic compound. Approximately 90% of ethylene is used to produce polyethylene, ethylene oxide, ethylene dichloride, and ethyl benzene.

Sr. No SPECIFICATION UNIT RANGE LIMIT TEST METHOD

1. Ethylene % vol 99.9 (min) By difference

2. Hydrogen ppm vol Less than 10 QM-GC-003

3.Carbon

Monoxideppm vol Less than 2 QM-GC-004

4. Carbon Dioxide ppm vol Less than 5 QM-GC-004

5. Acetylene ppm vol Less than 5 QM-GC-004

6. Methane ppm vol Less than 300 QM-GC-004

7.Methane +

Ethaneppm vol Less than 1000 QM-GC-002

8. C3+ ppm vol Less than 15 QM-GC-002

9. Oxygen ppm vol Less than 3QM-GC-005 &

QMS-IS-001

10. Nitrogen ppm vol Less than 100 QM-GC-005

11. Water ppm wt Less than 5 QMS-IS-003

12. Alcohol Methanol ppm wt Less than 5 QM-GC-006

13.Nitrogen Oxide

(NO)Process free

14. Sulphur ppm wt Less than 2 QM-GC-007

15. Source B1505, B15305 & Ethylene tank T 2201

3130

Page 18: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

TECHNICAL DISCLAIMER

Before using this product, the user is advised and cautioned to make its own determination and assessment of the safety and suitability of the product for the specific use in question and is further advised against relying on the information contained herein as it may relate to any specific use or application. It is the ultimate responsibility of the user to ensure that the product is suited and the information is applicable to the user’s specific application. Muntajat does not make, and expressly disclaims, all warranties, including warranties of merchantability or fitness for a particular purpose, regardless of whether oral or written, express or implied, or allegedly arising from any usage of any trade or from any course of dealing in connection with the use of the information contained herein or the product itself. The user expressly assumes all risk and liability, whether based in contact, tort or otherwise, in connection with the use of the information contained herein or the product itself. Further, information contained herein is given without reference to any intellectual property issues, as well as any international laws which may be encountered in the use thereof. Such questions should be investigated by the user.

SULPHURIC ACID

Sulfuric Acid is one of the largest volume industrial chemical produced in the world. Around 60% of Sulfuric Acid world production is consumed for fertilizers, particularly superphosphates, ammonium phosphate and ammonium sulfates. About 20% is used in chemical industry for production of detergents, synthetic resins, dyestuffs, pharmaceuticals, petroleum catalysts, insecticides and antifreeze, as well as in various processes such as oil well acidizing, aluminum reduction, paper sizing and water treatment. Other uses are dispersed into a multitude of applications such as pigment, paints, cellophane, acetate and viscose textiles, lubricants, non-ferrous metals and batteries. Qatar Acid has production capacity of 33,000 MTPA and mainly supplying to local Qatar market.

Produced by: Qatar Acids Company.

Characteristic RESULT

Concentration of Acid 98.5%

Specific Gravity at 20 C̊ 1.84

Freezing Point 10.1 C̊

Boiling Point 340 C̊

Residue on Ignition Less Than 40 ppm

Iron Content 10 ppm

Lead & Arsenic Nil

SO2 Less Than 30 ppm

32

Page 19: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

Australia | Bangladesh | China | Egypt

India | Jordan | Malaysia | Morocco | Netherlands

Pakistan | Philippines | Sri Lanka | Thailand

Turkey | U.A.E. | Vietnam

Muntajat B.V. Offices:

www.muntajatbv.com [email protected]

Vietnam

MUNTAJAT B.V. GLOBAL NETWORK

Page 20: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives

MUNTAJAT B.V. GLOBAL NETWORK

Netherlands (HQ) - The HagueWTC The Hague, 19th Floor, Toren E, Prinses Margrietplantsoen 78-A, 2595 BR Den Haag, The Hague, The Netherlands.Tel.: +31 70 2055630 - [email protected] Bangladesh - DhakaPlanners Tower, 13/A Sonargoan Road 15th Floor, Room No.- 5 Dhaka-1000, Bangladesh.Tel.: +880-2-9675737 - [email protected] China - Guangzhou Room 1403, CITIC Plaza, No. 233. Tian He Road North, Guangzhou, 510613,P.R. China.Tel.:+86 20 8752 1661 - [email protected] China - Shanghai Room 1602, 16th Floor, Silver Court, No. 218 South Xi Zang Road, Shanghai, P.R. China.Tel.: +86 21 5302 0655/6, +86 21 5302 0660/1 - [email protected] Egypt - Cairo10 El Nozha St. - Ard Al Golf, Heliopolis, Cairo, Egypt.Tel.: +2 02 26901223 - [email protected] Jordan - AmmanMecca St., AL-Husseini Complex, Building No.152 , 5th Floor, Office No.502, Amman - Jordan.Tel.: +962 6 5522676/5522678 - [email protected] Italy - MilanoLargo Francesco Richini, 620122 Milano – ItalyTel.: +39 333 7037731 - [email protected]

India - Mumbai914, 9th Floor The Capital Building, Bandra Kurla Complex,Bandra East, Mumbai, Maharashtra, India, Pin Code – 400051.Tel.: +91 22 42465700 - [email protected]

Malaysia - Kuala LumpurLot 17-04, Level 17, Menara HLA, No. 3 Jalan Kia Peng, Kuala Lumpur, Malaysia.Tel.: +603-21667122 - [email protected]

Morocco - Casablanca8 rue Ali Abderrazak, Residence, PLEIN CIEL. Casablanca, Morocco.Tel.: +212 522 23 38 86 - [email protected] Pakistan - Karachi2nd Floor, Bahria Complex II, M. T. Khan Road, Karachi, Pakistan.Tel.: +9221 35611595/6/7 - ext 106 - [email protected] Philippines - ManilaLevel 40 PBCom Tower, 6795 Ayala Avenue, Corner V.A Rufino St. 1226,Makati City, Philippines.Tel.: +632 7899105 - [email protected] Sri Lanka - ColomboL-05 East Low Block, World Trade Center, Colombo 01,Sri LankaTel.: +94 11 244 5777 - [email protected] Thailand - Bangkok20th Floor, Room 2009, SJ Infinite one, 349 Vibhavadi - Rangsit road Chompol, Chatuchak, Bangkok 10900, Thailand.Tel.: +662 018 3549 - [email protected] Turkey - IstanbulBuyukdere Cad. Noramin Is Merkezi NO:237 A111 Maslak Sariyer - Istanbul.Tel.: +902 1 2329 8250 - [email protected] U.A.E. - Dubai22nd Floor, The Citadel Tower, Business Bay Area, Dubai, U.A.E.Tel.: +971 4 4534980 - [email protected] Vietnam - Ho Chi Minh Room 4605, Level 46 Bitexco Financial Tower, 02 Hai Trieu Street, District 1Ho Chi Minh, VietnamTel.: +84 8 6 287 6160 16161 - [email protected]

For general queries please contact [email protected]

3736

Page 21: Chemicals Technical Data Sheet - Qatar Renminbi Centera2zpreview.com/Muntajat/wp-content/uploads/2017/08/Chemicals... · Qatar’s chemicals, ... Sodium and Calcium Sulphonated Derivatives