Check Point VPN E75 Installation and Configuration Instructions

CONFIDENTIAL & PROPRIETARY INFORMATION OF SOMOS, INC. The information contained in this document is confidential and proprietary to Somos, Inc. and is intended for the express use of Responsible Organizations (Resp Orgs), Service Control Point (SCP) Owner/Operators or Somos, Inc.'s vendors, and their designated representatives. Any unauthorized release of this information is prohibited and punishable by law. Somos, Somos and Design, 4 Quarters Design, SMS/800 and SMS/800 Toll-Free Means Business are trademarks of Somos, Inc. Copyright © 2016 Somos, Inc. All rights reserved.

Date: Version:

06/2016 8

Somos External

All other brands or product names are trademarks or registered trademarks of their respective companies or organizations.

SECURITY CLASSIFICATION – SOMOS EXTERNAL

TRADEMARK ACKNOWLEDGEMENTS

For general information about this document, please call or text the Help Desk at 844.HEY.SOMOS (844.439.7666), Option 1. Help Desk may make this document available to authorized Responsible Organizations (Resp Orgs), Service Control Point (SCP) Owner/Operators on the Somos Website (somos.com).

Copyright © 2016 Somos, Inc. All rights reserved.

Property of Somos, Inc.

3

1 • Download the VPN from the Somos Website (somos.com). • From the main page, select the “Help Center” menu, and then scroll

down to the “FAQs” portion of the page.

2 • Click on the tab “Toll-Free Service Providers”, and then scroll down

to the “What software is needed…” question. • Select the “E75 Remote Access Client for Windows XP, Vista (32 bit

and 64 BIT), Windows 7 (32 BIT and 64 BIT)”.

3 • On the Save As window, choose Desktop or your preferred location. • Next, double click on the zipped file from your selected location. • To begin Installation, click on the “CheckPointVPN.msi” file.

4

When the Welcome screen is displayed,

click Next.

5

Select SecuRemote and click Next.

6

Select the “I accept the terms…” option

and click Next.

7

Click Next.

8

Click Install.

9

Please wait while the program features are being

installed. When it’s complete, click Next.

10

Click Finish.

11

1

2

3

1 • Right click on the padlock in

the system tray.

2 • Select Connect.

3

• You will see a pop up displaying, “No site is configured. Would you like to configure a new site?” click Yes.

How to Connect

12

When the Site Wizard opens, click

Next.

13

You can add a display name but this is not required. Click Next

when the required information has been entered.

The server address is: 216.160.25.70

for the SMS/800 platform Production (IMSE1) and Tutorial

(IMSE3) environments. If you would like to access the

SMS/800 platform’s Delta environment (IMSE0), you will

need to create a new site and use the server address: 67.96.131.55.

14

If you previously entered a Site Name, the Resolving Site Name window will

appear.

When the Site Name is resolved, the Site Wizard

will proceed automatically to the next window.

15

When this message is displayed, click

“Trust and Continue”.

16

Select SecurID and click Next.

17

Select Use Key FOB hard token and click

Next.

18

Click Finish. In the “Would you like to connect?” window,

select Yes to connect.

19

• Right click on the key and select Connect…

• Type your Username, PIN, Tokencode and click Connect.

How to Connect

• The first time a user logs in using their RSA token, they will be in new PIN mode.

• In new PIN mode, leave the PIN field blank.

New PIN Mode

20

If you are in new PIN mode, you will

see the prompt below. Type ‘Y’ in the Response field and click Connect.

• User Logon ID authenticated by SecurID. • New PIN required. Do you wish to continue? [y/n] [n]

Prompt Message

21

After you enter a new PIN, click Connect.

You will see a pop up displaying “New PIN accepted”. Click OK.

• Enter your new PIN, containing 4 to 8 characters:

Prompt Message

22

If this is not the first time you are logging in, please enter

your Username, PIN, Tokencode and click Connect.

To access the VPN in the future, right click on the

padlock in your system tray and select Connect.

23

After you clicked connect, you may see this screen

displayed, “Connecting to…” if you are using the Site

Wizard.

When you have connected, a message will display

“Connection succeeded” above your system tray and your VPN connection will

now be ACTIVE. The padlock will have a green

circle next to it.

24

Web Addresses:

• The SMS/800 platform accessed via the Web Based Access (WBA) is currently supported with Java Runtime Environment 1.8 (JRE 1.8), in the address bar of your Internet Explorer (IE) 11 browser go to: • Production: app.somos.com • Tutorial: tutorial-app.somos.com • Delta Test: delta-app.somos.com

Logging In:

• In the address bar of the browser, enter the address of the SMS/800 platform environment you wish to go to and press the enter key.

• Once the page is displayed, you will then need to login to the SMS/800 platform WBA.

Contact Us! • If you have any questions concerning the Check

Point VPN E75 Installation and Configuration Instructions, please contact the Help Desk at 844.HEY.SOMOS (844.439.7666), Option 1.

Thank you.