Cemline Replacement Tube Bundles

P.O. BOX 55 CHESWICK, PENNSYLVANIA 15024Phone: (724) 274-5430 FAX: (724) 274-5448

www.cemline.com

Tube Bundle Options 4” to 30” Nominal Diameter U-Tube, or Straight Tube (Fixed Tubesheet or Floating Tubesheet)

Heat Exchanger Tube Bundles Tank Heater Tube Bundles Double Wall Vented Tube Bundles Standard & Specialty Alloys Heads & Bonnets Tank Collars & Nozzles A.S.M.E. Stamping Available

Tubing Alloy List Copper Carbon Steel Admirality Brass 90:10 Copper Nickel 304-L Stainless Steel 316-L Stainless Steel

Double Wall Material List Copper inner/Copper outer Copper inner/90:10 Cu-Ni outer 90:10 Cu-Ni inner/90:10 Cu-Ni outer

(Other tubing alloys and materials are available upon request)

We can cross reference other manufactures make

and model numbers: Adamson American Standard A. O. Smith

Armstrong Bell & Gossett ITT Standard Old Dominion Patterson-Kelley Reco Taco Thrush Yula

Standard delivery time 1 week. Can provide quick ship upon request.

MANUFACTURE DIRECT REPLACEMENTS

Dimensional Sheet

Please fill in informationthat is known.

Spacer/Baffle Options

R

BOLT CIRCLE

O.D.

P

Size of Bolts

BOLT CIRCLE

Half Baffle

Spacer

Baffle or Spacer Spacing

Number of Baffles or Spacers

oTank Replacement, Submerged Heater

oHeat Exchanger Replacement, Forced Hot Water Heater

Tube SheetoSteeloCopper LinedoOther

WalloSingle WalloDouble Wall

O.D. of Tubes

Number of Tubes

Material of TubesNumber of Passeso2 Passeso4 Passes

Often it is impossible to measure all dimensions while the unit is in service. We can manufacture a coil to fit when provided with the minimum of 4 dimensions.

Required information:

1. P - center to center of bolt holes.

2. Number of bolts.

3. R - O.D. of neck or circumference of neck.

4. Length of unit. If unknown, measure the length of vessel or maximum length available to remove bundle.Optional information:

1. O.D. 3. Size of bolts

2. Bolt circle

oFull Face Tube Sheet

oFull Face Tube Sheet (Drilled and Tapped)

oBetween the Bolt Tube Sheet

Tube Sheet Options

®

STONESTEEL is a Registered Trademark of Cemline Corporation

©2016 Cemline Corporation All Rights Reserved.

All trademarks on this brochure are the property of Cemline Corporation, unless otherwise noted or in any other way set forth as a third party rights. Unauthorized use of these trademarks, as well as the materials presented on this site, is expressly prohibited and constitutes a violation of the intellectual property rights of Cemline Corporation.

CEMLINE CORPORATIONP.O. BOX 55 CHESWICK, PENNSYLVANIA 15024Phone: (724) 274-5430 FAX: (724) 274-5448

www.cemline.com