2
POTS INaDX CDS-9070 Cellular Appliance POTS in a BOX Cel lular appliance directly replaces wireline analog Plain Old Telephone Service (POTS) l ines. The POTS in a BOX Solution The POTS in a BOX solution enables legacy analog wireline in-band Voice, Machine to Machine (M2M) Data, DTMF signaling tones, analog data modem tones (FSK and PSK), FAX and alarm system signals, currently connected to the Public Switched Telephone Network (PSTN), to be carried over LTE Cellular Data Network The POTS in a BOX solution uses the Cellular LTE Data Network, along with a firewalled Network Operating Center (NOC) to route Cellular data received via the L TE data network to or from the PSTN to enable call origination or call completion to occur using various methods including VoIP over Cellular Data channels. POTS in a BO M replaces existing wireline analog lines and permits uninterrupted, fast and reliable bi-directional Voice over Internet Protocol (VoIP) call completion with emulated wireline "dial tone" to transport the call including traditional analog voice telephone service, E-911 traffic, FAX, and Burglar and Fire Alarm traffic. Any application functionality that requires a traditional wireline dial tone-based circuit may utilize POTS in a BOX for connectivity. Transmission options include ability for both Cellular Data channel and other alternative Internet access pathways providing true failover, and diverse routing for calls. Failover option available (upon request) for 3G Cellular Voice channel pathway Supported Services 0 oaEMO . . • ·•■ . 1 0 . . " Applications Any application functionality that requires a traditional analog wireline with CUD, E-911 support FAX transmission Burglar and Fire Alarm signal transmission Ring-Down telephone line circuit (Auto dial) One number dialer line Elevator, Paging, Taxi phone line Analog M2M Legacy Analog Modem support Utility Automatic Meter reading Point of Sale terminal line Vending machine communication ATM machines data line Telemetry command and control (SCADA) SMB Router/Gateway High speed 4G/LTE Internet access via a 4-port wired LAN Wireless access via Wi-Fi Features and Benefits POTS in a BOX Analog POTS line replacement 2 FXS line ports: Calling Line Identification (CLID), E911 suppo with address ID transmission Managed Voice Service Individual Line status alerts via text and email Type approved 4G/LTE and 3G support (FCC, PTCRB) Integral Router with 1 WAN, 4 LAN Ports Integral Wi-Fi (Host and Client), 2.4GHz, 5GHz (802.11 b/g/n/ac) Industrial rugged metal case design 13 LED status indicators Integral battery back up Selectable service priority/Failover options Programmable settings for M2M minimum data usage Plug & Play Install Voice Over IP via L TE I Failover GSM voice I Auto Dial call boxes (Ring Down) I DR! FAX I Contact ID support for Fire and Security Alarms I Analog data support for a wide variety of FSK enabled Modems, M2M, SCADA and other legacy in- band analog communications devices I High speed Internet access via LTE, Wi-Fi, Local service provider I Powered by AT&T 17755 Homestead Ave, M1am1 Florida 33157 I [email protected]m I 805.339.9739 CDS-9070, Version 1.4 I Revised 03. 07. 18

CDS-9070 Cellular Appliance - DataRemote · Machine (M2M) Data, DTMF signaling tones, analog data modem tones (FSK and PSK), FAX and alarm system signals, currently connected to the

  • Upload
    others

  • View
    31

  • Download
    0

Embed Size (px)

Citation preview

Page 1: CDS-9070 Cellular Appliance - DataRemote · Machine (M2M) Data, DTMF signaling tones, analog data modem tones (FSK and PSK), FAX and alarm system signals, currently connected to the

POTS

INaEIDX™

CDS-9070 Cellular Appliance

POTS in a BOX™ Cellular appliance directly replaces wireline analog Plain

Old Telephone Service (POTS) lines.

The POTS in a BOX™ Solution

The POTS in a BOX™ solution enables legacy analog wireline in-band Voice, Machine to Machine (M2M) Data, DTMF signaling tones, analog data modem tones (FSK and PSK), FAX and alarm system signals, currently connected to the Public Switched Telephone Network (PSTN), to be carried over L TE Cellular Data Network

The POTS in a BOX™ solution uses the Cellular LTE Data Network, along with a firewalled Network Operating Center (NOC) to route Cellular data received via the L TE data network to or from the PSTN to enable call origination or call completion to occur using various methods including VoIP over Cellular Data channels.

POTS in a BO)(TM replaces existing wireline analog lines and permits uninterrupted, fast and reliable bi­directional Voice over Internet Protocol (VoIP) call completion with emulated wireline "dial tone" to transport the call including traditional analog voice telephone service, E-911 traffic, FAX, and

Burglar and Fire Alarm traffic. Any application functionality that requires a traditional wireline dial

tone-based circuit may utilize POTS in a BOX™ for connectivity. Transmission options include ability for both Cellular Data channel and other alternative

Internet access pathways providing true failover, and diverse routing for calls. Failover option available (upon request) for 3G Cellular Voice channel pathway

Supported Services

� � 0

oara"(.EMO!c � (:)

. . • ·••■.1 • ii 0 .

. "

Applications

• Any application functionality that requires a traditional analog

wireline with CUD, E-911 support• FAX transmission

• Burglar and Fire Alarm signal transmission• Ring-Down telephone line circuit (Auto dial)

• One number dialer line

• Elevator, Paging, Taxi phone line• Analog M2M

• Legacy Analog Modem support• Utility Automatic Meter reading• Point of Sale terminal line

• Vending machine communication• A TM machines data line• Telemetry command and control (SCADA)

• SMB Router/Gateway

• High speed 4G/L TE Internet access via a 4-port wired LAN

• Wireless access via Wi-Fi

Features and Benefits

• POTS in a BOX™

• Analog POTS line replacement• 2 FXS line ports: Calling Line Identification (CLID), E911 support

with address ID transmission

• Managed Voice Service

• Individual Line status alerts via text and email• Type approved 4G/L TE and 3G support (FCC, PTCRB)• Integral Router with 1 WAN, 4 LAN Ports• Integral Wi-Fi (Host and Client), 2.4GHz, 5GHz (802.11 b/g/n/ac)

• Industrial rugged metal case design• 13 LED status indicators

• Integral battery back up

• Selectable service priority/Failover options

• Programmable settings for M2M minimum data usage• Plug & Play Install

Voice Over IP via L TE I Failover GSM voice I Auto Dial call boxes (Ring Down) I DR! FAX I Contact ID support for Fire and Security Alarms I Analog data support for a wide variety of FSK enabled Modems, M2M, SCADA and other legacy in-band analog communications devices I High speed Internet access via L TE, Wi-Fi, Local service provider I Powered by AT&T

17755 Homestead Ave, M1am1 Florida 33157 I [email protected] I 805.339.9739

CDS-9070, Version 1.4 I Revised 03. 07. 18

Page 2: CDS-9070 Cellular Appliance - DataRemote · Machine (M2M) Data, DTMF signaling tones, analog data modem tones (FSK and PSK), FAX and alarm system signals, currently connected to the

805.339.9739

INTERFACES--------------------• 2 RJ-11 for FXS ports• 1 RJ-45 for WAN port

(Ethernet 10/100 Base-T)

• 4 RJ-45 for LAN port (Ethernet 10/100 Base-T)

• 2 SIM Card Slots• 4G-LTE Radio with 3G failover• 4 external antenna ports: 2 LTE, 2 Wi-Fi• Wi-Fi Host and Client

POWER--------------------

• DC input (7VDC to 30 VDC) via 4 Pin locking

connector• AC input Power Adapter:

120VAC/240VAC, DC Output: 12V, 1.5A• Internal Battery: Active on call: 6 Hours• Internal Battery: Standby 24 Hours

ENVIRONMENTAL--------------------• Operation Temperature: -5° C to +70° C

(+ 23° F to + 158° F)• Storage Temperature: -5° C to +50° C

(+23° F to + 122° F)• Relatively Humidity: 5% to 95% Non-Condensing• Shock: Impact tested to 75cm (30 inches) drop.

Meets GR-63-CORE standard

PHYSICAL--------------------• (L) 7.5” x (W) 4.7” x (H) 1.9”

(L) 190 mm x (W) 118 mm x (H) 48 mm• Weight 2.0 lbs (0.9 Kg)

SHIPMENT PACKAGE CONTENTS--------------------• Main Unit• Power Adapter• 2 LTE, 2 Wi-Fi antennas• Ethernet Cable• 2 Phone Cords• Mounting Bracket• Quick set-up guide

INTEGRATED VOICE--------------------• Voice over IP via LTE• Voice via 3G Voice Channel• VoIP• DTMF: In-band, out of band• PESQ > 4.3 (G.711); 3.7 (G.729)• Echo Cancellation

VOICE CALL FEATURES--------------------• E911 Support• Caller ID• 3-way conference• Call hold, forwarding, transfer• Call waiting

OPTIONAL WIRED NAT ROUTER--------------------• DHCP Server and Client• WAN• VPN• Firewall

OPTIONAL WIRELESS/WI-FI--------------------• 4 SSID’s per Radio• Static/Dynamic WEP (64/128bit)• WPA/WPA2• WPS

FAILOVER OPTIONS--------------------• LTE>3G• LTE>Broadband• Broadband>LTE

MANAGEMENT--------------------• Web based management Interface• Customer management dashboard• Line status monitoring with alerts • Mass device management (TR-069)• Flexible plans for required managed service• Billing via Service provider or direct to customer

CDS-9070: Detailed Specifications

17755 Homestead Ave, Miami Florida 33157 | [email protected] | 805.339.9739CDS-9070, Version 1.4 I Revised 03. 07. 18