Ccna Voucher Forml 1a

8/3/2019 Ccna Voucher Forml 1a

1/39

This item references content from the following areas:

CCNA Discovery: Designing and Supporting Computer Networks

3.2.4 Download and Install Cisco IOS Software

Assessment Item:

A router has been removed from the network for maintenance. A new Cisoftware image has been successfully downloaded to a server and copied

the router. What should be done before placing the router back into servi

Back up the new image.

Copy the running configuration to NVRAM.

Delete the previous version of the Cisco IOS software from flash.

Restart the router and verify that the new image starts successfully.

Reset View Learner

Response

Observable Description Max Value Earned Va

1 correctness of response2 points for Option 4

0 points for any other option2 2

CloseThis item references content from the following areas:


8.3.2 Creating the Test Plan

Assessment Item:

What makes the Cisco EasyVPN application a useful tool for VPN implem

It provides encryption algorithms unavailable in other systems.

It ensures that remote workers actually use the VPN for connectivity.

It simplifies the configuration tasks for the device that is used as the V

It allows a greater variety of network devices to be used for VPN con

Reset View Learner

Response

Observable DescriptionMax

Value

Earned

Value
http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_117234,SmvID=6361%20http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_117234,SmvID=6361%20http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_119601,SmvID=6361%20http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_119601,SmvID=6361%20http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_117234,SmvID=6361%20http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_117234,SmvID=6361%20http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_119601,SmvID=6361%20http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_119601,SmvID=6361%20


2/39

1correctness of

response

2 points for Option 3

0 points for any other

option

2 2

Assessment Item:

Which IOS component can be used to classify and monitor network traffi

CDP

NBAR

CiscoWorks

Network Assistant

Reset View Learner

Response


Value

Earned

Value

1correctness of

response


0 points for any otheroption

2 0



6.1.4 Using CIDR Routing and Summarization

Assessment Item:

Refer to the exhibit. The routers are configured with RIPv2 with default configura

attempting to communicate with other networks, hosts from 172.16.2.0/24 are exp
http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_133548,SmvID=6361%20http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_133554,SmvID=6361%20http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_133554,SmvID=6361%20http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_133548,SmvID=6361%20http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_133554,SmvID=6361%20http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_133554,SmvID=6361%20


3/39

connectivity issues. What could be done to resolve this issue?

Change to a public IP address scheme.

Disable automatic route summarization.

Change the IP network address on R3 Fa0/0 to 172.16.1.128 /26.

Change the subnet mask on the link between R2 and R3 to 255.255.255.0.

Reset View

Learner Response


Value

Earned

Value

1correctness ofresponse

2 points for Option 20 points for any other

option

2 2



8.2.5 Troubleshooting Frame Relay Operation

Assessment Item:

Using the show frame-relay pvc and debug frame-relay lmi command

a Frame Relay problem, a network administrator rules out issues at Laye

Further investigation reveals that the IP address of the remote router doethe Frame Relay table. What should the next step be in solving the probl

Configure the router using the frame-relay map ip command.

Disable Inverse ARP on the local router.

Verify that the remote router has Frame Relay encapsulation enabled

Ensure that the LMI type is correct for the circuit.

Reset View LearnerResponse

Observable Description Max Value Earned Va



Close

All contents copyright 2003-2011 Cisco Systems, Inc. All rights reserved. PrivacyStatement
http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_133579,SmvID=6361%20http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_133579,SmvID=6361%20http://openlargepopup%28%27http//cisco.netacad.net/cnams/content/Privacy.jsp','privacy');http://openlargepopup%28%27http//cisco.netacad.net/cnams/content/Privacy.jsp','privacy');http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_133579,SmvID=6361%20http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_133579,SmvID=6361%20http://openlargepopup%28%27http//cisco.netacad.net/cnams/content/Privacy.jsp','privacy');http://openlargepopup%28%27http//cisco.netacad.net/cnams/content/Privacy.jsp','privacy');


4/39



1.6.2 Considerations Unique to WLAN

Assessment Item:

What can be broadcast over the wireless network to help a user connect toand use wireless services?

SSID

WEP keys

VLAN parameters

WPA encryption keys

VPN authentication information

Reset View Learner

Response


Value

Earned

Value



option

2 2



7.3.3 Validating Device and Topology Selection

Assessment Item:


5/39

Refer to the exhibit. A network administrator is configuring a new router to prov

between VLANs. The administrator removes the router from the box and connec

interface to a trunking port on the switch. After the configuration is applied to theshown in the exhibit, the traffic between VLANs fails. What is causing this to oc

The R1 router needs a routing protocol configured.

The subinterfaces of the R1 router should have IP addresses applied.

The R1 router needs three additional Fast Ethernet interfaces installed.

The subinterfaces of the R1 router should be configured in the same VLAN.

Reset View

Learner Response


Value

Earned

Value

1correctness of

response



2 2



7.1.1 Purpose of a Prototype

7.2.5 Validating the IP Addressing Scheme

Assessment Item:
http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_141348,SmvID=6361%20http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_141348,SmvID=6361%20http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_141348,SmvID=6361%20http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_141348,SmvID=6361%20


6/39

Refer to the exhibit. Following a test plan, the network systems engineer complete

configuration of an access layer switch and connects three PCs. The engineer attemfrom each PC to the other connected PCs to test the configuration. Which statemen

result of the last step?

Host 1 can ping Host 2.Host 1 can ping Host 3.

Host 2 can ping Host 3.

No hosts can ping any other host.

Reset ViewLearner Response


Value

Earned

Value



option

2 0


http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_141350,SmvID=6361%20http://ev-iip.netacad.net/virtuoso/servlet/org.cli.delivery.rendering.servlet.IIPNewServlet/LMS_ID=CNAMS,Theme=508theme,Style=508,Language=en,Version=2,CourseID=en-knet-lcms_discovery4_en_40,FormID=knet-af_25289,ItemID=knet-it_141350,SmvID=6361%20


7/39

6.2.3 Designating the Routing Strategy

Assessment Item:

A technician adds the command Router(config-router)# variance 5 to a ro

EIGRP as the routing protocol. What is the result of entering this commanenables unequal cost load balancing

adjusts the metric of all EIGRP routes to 5

restricts the number of EIGRP feasible successor routes to 5

activates the use of all K values in the composite metric calculation

enables EIGRP equal cost load balancing over a maximum of 5 route

Reset View Learner

Response

Observable Description MaxValue

EarnedValue

1correctness of

response



option

2 0

Assessment Item:

During a review of the proposed bill of materials, an account manager of t

solution company realizes that the systems engineer included a switch witand reduced capabilities for the access layer than was originally specified

designer. When questioned, the systems engineer responds that the switchthe designer cannot be purchased within the budget limitations of the cust

action should the account manager take?

Inform the customer that the project budget must be increased.

Inform the customer that the project cannot be completed given the u

budget constraints.Communicate any risks that are associated with the equipment substi

obtain customer approval to proceed.

Because the customer is probably aware that the budget limitations wlower cost, less capable equipment, the account manager should do n

Reset View Learner

Response


Value

Earned

Value

1 correctness of

response




8/39

option



1.3.4 Traffic Filtering at the Distribution Layer

Assessment Item:

Refer to the exhibit. An extended ACL has been created to deny traffic from the 192.168.3

to the web server with IP address 209.165.201.15. According to Cisco best practices, wher

ACL be applied?

RTB Fa0/0 inbound

RTC S0/0/1 inbound

RTD Fa0/0 outbound

RTC S0/1/0 outbound

Reset

ViewLearner

Response


9/39

Description Max Value Earned Value

ness of response2 points for Option 10 points for any other option

2 0

references content from the following areas:

iscovery: Designing and Supporting Computer Networks

2.5 Troubleshooting Frame Relay Operation

ent Item:

Which two statements accurately describe the result of entering the commandBRT(config-if)# frame-relay map ip 10.1.10.1 35 on a router? (Choose two.)

The remote router updates the Frame Relay map table with DLCI 35 to reach the10.1.10.0 network.

Inverse ARP is used to add an entry for 10.1.10.1 into the Frame Relay map table

via the use of DLCI 35.

DLCI 35 replaces the MAC address in the ARP table for entry 10.1.10.1.

A Layer 2 address is statically mapped to a Layer 3 address.

Router BRT uses DLCI 35 to forward data to 10.1.10.1.

View LearnerResponse


Value

Earned

Value

1correctness of

response

Option 4 and Option 5 are correct.1 point for each correct option.

0 points if more options are selected than

required.

2 0



7.1.6 Identify Risks or Weaknesses in the Design

Assessment Item:


10/39

Refer to the exhibit. A networking company designer is reviewing a diagram of a c

network. What are the two problems that need to be resolved in the topology that is(Choose two.)

The firewall router and ISP connection represent a single point of failure.

If one of the Layer 3 switches fails, the Cisco Call Manager will be unreachabl

A power supply failure of the server block switch will cause the entire IP telep

fail.Using Layer 3 switches to interconnect the server block servers to the IP phone

too much delay.

The IP phones need to be redundantly connected to the switches to prevent sin

failure at the access layer.

Reset View

Learner

Response


Value

Earned

Value


11/39


12/39

appropriate for testing the addressing scheme?

using the production network of the customer

using actual network equipment in a lab

using the Cisco Network Assistant

using a network simulation tool

Reset View Learner

Response


Value

Earned

Value



option

2



2.2.5 Explain the Role of the Account Manager

Assessment Item:

Who provides technical support and training after deploying a network solarge networking team?

account manager

network designerpre-sales engineer

post-sales field engineer




2 2




13/39

3.3 Installing a New Hardware Option

ent Item:

A network technician needs to install a four-port switch module in an operational Cisco1841 router that has an available HWIC slot. What should the technician do first?

Turn off the power to the router before installing the new module.

Install the hot-swappable four-port switch module directly into slot 1 of the 1841.

Move the existing WIC-2T module to slot 1 and install the four-port module in slot

0.

Shut down all Fast Ethernet ports on the router until the switch module installationis complete.

View Learner

Response

Observable Description Max Value Earned Value

1 correctness of response2 points for Option 10 points for any other option

2 0

Close



7.2.5 Validating the IP Addressing Scheme

Assessment Item:

A customer of a large multisite organization has asked a network engineer

new IPv4 addressing strategy with an IPv6 strategy for their new network

implementation. Which tool is appropriate for testing and comparing both

schemes?

NBAR

Cisco SDM

Network Assistant

network simulation tool

Reset View Learner

Response


Value

Earned

Value


14/39

1correctness of

response



option

2 0



3.2.4 Download and Install Cisco IOS Software

Assessment Item:

Which two pieces of information are needed before an IOS image may be

router from a TFTP server? (Choose two.)

the IP address of the TFTP server

the current name of the IOS image on the router

the operating system of the TFTP serverthe name of the configuration file in NVRAM

the name of the IOS image on the TFTP server

encapsulation of the router interface that is connected to the TFTP ser

Reset View Learner

Response


ess of response

Option 1 and Option 5 are correct.

1 point for each correct option.

0 points if more options are selected than required.

2



2.1 Designing the Logical LAN IP Address Scheme

ent Item:

A large company plans to add several servers and requires that the servers be reachable

directly from the Internet. Which action will help the company accomplish this goal?


15/39

Assign to each server a static internal IP address that is mapped statically to a public

IP address.

Place all servers in their own Class C private subnet.

Provide a private address to each server using DHCP.

Assign addresses from a pool of public Class B addresses using DHCP.







6.2.3 Designating the Routing Strategy

8.2.6 Identifying Risks and Weaknesses

Assessment Item:

Refer to the exhibit. A pre-sales system engineer receives a diagram of the currentcustomer. EIGRP is the routing protocol used on the WAN. Based on the default o

EIGRP, which statement is true about the routing table on router R1?

There is a single route to the 192.168.16.0/24 LAN using the T1 connection.

There is a single route to the 192.168.16.0/24 LAN using the DSL connection

There is a single route to the 192.168.16.0/24 LAN using the Metro Ethernet


16/39

EIGRP installs all three routes to the 192.168.16.0/24 LAN and load balances

Reset ViewLearner Response


EarnedValue

1correctness of

response



option

2 2




Assessment Item:

Refer to the exhibit. The named ACL "Managers" already exists on the router.

happen when the network administrator issues the commands that are shown i

The commands overwrite the existing Managers ACL.The commands are added at the end of the existing Managers ACL.

The commands are added at the beginning of the existing Managers ACL

The network administrator receives an error that states that the ACL alrea

Reset View Learner

Response


Value

Earned

Value



option

2 2




17/39

7.2.4 Validating the Choice of Routing Protocol

Assessment Item:

A network administrator is asked to upgrade the enterprise network device

modify the addressing scheme to support VLSM and route summarizationnetwork infrastructure contains both Cisco and non-Cisco routers. The pla

old routers gradually with the latest Cisco routers. Which two routing protadministrator use to support both upgrading requirements? (Choose two.)

BGP

OSPF

RIPv1

RIPv2

EIGRP

Reset View Learner

Response


Value

Earned

Value

1correctness of

response

Option 2 and Option 4 are

correct.

1 point for each correct

option.0 points if more options are

selected than required.

2 0



3.1.1 Creating a Network Diagram

Assessment Item:


18/39

Refer to the exhibit. What is an accurate description of the first neighbor that is displ

output?

24 port 2950 switch with a non-default native VLAN

24 port 2950 switch that is connected to Fa0/0 on Router1

24 port 2950 switch that is assigned to the administrator-defined VTP domain

24 port 2950 switch with interface GigabitEthernet0/1 that is operating at 1000 M

Reset View

Learner

Response


Value

Earned

Value

1correctness of

response



option

2 2



5.5.1 Placing Security Functions and Appliances


19/39

Assessment Item:

When implementing a security policy, which two actions should be includthe security checklist? (Choose two.)

Disable all logging.

Enable Telnet on TCP port 23.

Use HTTP for web administration.

Set timeouts and ACLs on VTY lines.

Shut down any unused ports and interfaces.

Reset View Learner

Response


Value

Earned

Value

1correctness of

response

Option 4 and Option 5 arecorrect.

1 point for each correct

option.0 points if more options are

selected than required.

2 2



8.2.4 Prototype the WAN

Assessment Item:

What type of Frame Relay subinterface must be used to connect remote si

having to disable split horizon?

multipoint

multiaccess

point-to-point

nonbroadcast multiaccess

Reset View Learner

Response


Value

Earned

Value

1 correctness of 2 points for Option 3 2 2


20/39

response0 points for any other

option



4.4.2 Requirements of an IP Telephony Solution

Assessment Item:

When implementing an IP telephony solution, why should VLANs be use

to allow the use of a single IP gateway

to separate voice from data traffic for ease of prioritization

to allow the PBX to use VLAN IDs to filter both voice and data traffi

to allow connectivity between traditional phone devices and IP-based

devices



Value

Earned

Value




2



1.1.2 The Benefits of a Hierarchical Network Design

Assessment Item:

In the Cisco Enterprise Architecture, which module would include web an

servers for access by users external to the organization?

campus core

enterprise edge

enterprise branch

enterprise campus

Reset View Learner

Response


21/39


Value

Earned

Value

1correctness of

response



2 0



3.2.2 Investigating the Installed Cisco IOS Software

Assessment Item:

Refer to the exhibit. In the Cisco IOS filename that is shown, what is signifiunderlined portion?

version

platform

file format

feature set



Value

Earned

Value




2 0



2.1.6 The Network Lifecycle Operate Phase

Assessment Item:

Which statement describes the use of a network baseline?

It creates a high level logical network diagram.


22/39

It provides a point of reference for future network evaluations.

It allows precise identification of the original location of network equ

It should be established as soon as a problem is detected on the netwo



ness of response2 points for Option 2




5.3 Tools for Network Monitoring

ent Item:

As part of network monitoring, a network administrator receives an alert that the CPU

usage of the core router reaches 90% several times a day. Which protocol is in use to

monitor the network performance?

DNS

SNMP

SMTP

DHCP

TFTP








23/39

4.2.3 File Transfer and Email

Assessment Item:

What is a characteristic of FTP traffic flows?

low-volume trafficpredictable bandwidth usage

large packet sizes for transfers

low throughput with high response-time requirements



Value

Earned

Value

1correctness of

response

2 points for Option 30 points for any otheroption

2 0



6.1.2 Classful Subnets and Summarization

Assessment Item:


24/39

Refer to the exhibit. All router interfaces are up and RIP version 2 is configured as the

protocol. The users in networks 172.16.8.0 /24 and 172.16.9.0/24 are not able to reach

172.16.16.0/24 network. The network administrator examines the routing tables and fithough all directly connected networks have been entered in the RIP configuration, no

present. What is the most likely cause of this problem?

Autosummarization is enabled on all routers.

The split-horizon rule is disabled on all routers.

RIP version 2 does not support classless routing.

RIP version 1 should have been used instead of version 2.The 10.10.4.0 networks should be replaced with 192.168.4.0 networks.

Reset View

LearnerResponse



2




25/39

2.2 Creating the Test Plan

ent Item:

Refer to the exhibit. What result can be expected for STP in VLAN1?

DSW1 is the root bridge. DSW3 would become root upon failure of DSW1.




r

se





26/39

Close



6.3.3 Implementing IPv6 on a Cisco Device

Assessment Item:

Refer to the exhibit. What will be the result of entering the commands as shown

RIPng will not be enabled on interface fa0/0 because the network address i

address.

RIPng will not be enabled on this interface because the IPv6 address is only

RIPng will be enabled on interface fa0/0 and will advertise the configured

The IPv6 interface configuration requires a networkstatement for the netw

The IPv6 routing instance must be called RTA not RT0.

Reset View

Learner Response


Value

Earned

Value

1correctness of

response



option

2



7.1.4 Validating LAN Technologies and Devices

Assessment Item:


27/39

Refer to the exhibit. EIGRP has been configured as a routing protocol in the network. User

on LAN_1 and LAN_2 can ping their default gateways. Users on LAN_1 complain that theaccess the resources on the file server that is connected to LAN_2. A technician issues the

briefcommand on R1 to verify the status of the interfaces. What information will help the

troubleshoot the issue?

Interface S0/0/1 line protocol is down.

Interface Vlan1 is administratively down.Interface Fa0/1 is missing an IP address.

Interface S0/0/0 is configured with an incorrect IP address.

Reset

ViewLearner

Response


Value

Earned

Value

1correctness of

response


option

2 0




28/39

3.4.2 Physical Network Considerations

3.4.3 Wireless Site Survey and Planning

Assessment Item:

What should be considered in the design of a wireless LAN on a corporatthe vendor of all employee wireless NICs

the cables that are used for LAN connectivity

the number of wireless NICs required on enterprise servers

the messaging features that are used on employee cell phones

the location of the concrete pillars and walls between the offices

Reset View Learner

Response


EarnedValue

1correctness of

response



option

2 0



8.2.3 Validating the Choice of Devices and Topologies

Assessment Item:

What is used locally by a router to identify each Frame Relay PVC?

LMI

DLCI

IP address

MAC address



Value

Earned

Value



option

2 2


29/39




Assessment Item:

Refer to the exhibit. Access list 100 is applied inbound to interface serial 0/0/0 on the SWhich traffic will be denied by the configuration?

DNS traffic from host A to the Internet

FTP traffic from host A to the Internet

ICMP traffic from the ISP to server 1

traffic from the ISP to the server on port 23

Reset View

Learner

Response


Value

Earned

Value


30/39

1correctness of

response



option

2 2



4.4.2 Requirements of an IP Telephony Solution

Assessment Item:

Which characteristic should be considered by a network designer when im

VoIP solution?

VoIP traffic is generally classified as low priority.

VoIP centrally routes calls in the same manner as a traditional PBX.

VoIP traffic is highly reliable because of retransmission of dropped pVoIP can make use of QoS features to help reduce interruptions in co

Reset View Learner

Response


Value

Earned

Value

1correctness of

response


option

2 0



4.3.2 Traffic Queues

Assessment Item:

Which statement is true about the pairing of services and transport layer p

FTP and VoIP?

FTP applications and VoIP use TCP at the transport layer.

FTP applications and VoIP use UDP at the transport layer.

FTP applications use TCP at the transport layer while VoIP uses UDP

transport layer.FTP applications use UDP at the transport layer while VoIP uses TCP

transport layer.


31/39

Reset View Learner

Response


Value

Earned

Value

1 correctness ofresponse



option

2 0



5.5.2 Implementing Access Control Lists and Filtering

Assessment Item:

To reduce unwanted incoming traffic from the outside, a network techniciwith establishing the filtering rules for the network firewall. Which traffic

allowed?

incoming ICMP traffic

all incoming connections to internal servers

incoming responses to traffic that is generated from the inside

incoming connections from the outside that duplicate inside addresse

Reset View Learner

Response


Value

Earned

Value

1correctness of

response



option

2 0



8.1.2 Testing WAN Connectivity with Simulation Software

Assessment Item:


32/39

Refer to the exhibit. PPP was successfully negotiated between the two routers. Whiset can be found on the local router to produce the results that are shown in the grap

hostname Sales

interface serial0/0

encapsulation ppp

ppp authentication chap

username Market password 5 jdhdh4737f7hssn

hostname Market

interface serial0/0

encapsulation ppp

ppp authentication chap

username sales password 5 jdhdh4737f7hssn

hostname Market

interface serial0/0

encapsulation ppp

ppp authentication pap

username sales password 5 jdhdh4737f7hssn

hostname Sales

interface serial0/0

encapsulation ppp

ppp authentication pap

username Market password 5 jdhdh4737f7hssn

Reset ViewLearner

Response


Value

Earned

Value

1correctness of

response


option

2 0


33/39



3.1.1 Creating a Network Diagram

7.1.3 Verifying the Design Meets Goals and Requirements

Assessment Item:

Refer to the exhibit. During prototype testing of the network, the network administrator ver

all devices. On which device did the network administrator issue the command?

R1

R2

R3

R4

R5

Sw3

ResetView

Learner

Response


34/39


Value

Earned

Value

1correctness of

response



2 0



7.3.4 Validating the Security Plan

Assessment Item:

What will prevent workstations with unauthorized MAC addresses from c

the network through a switch?

STPVTP

RSTP

BPDU

port security

Reset View Learner

Response


Value

Earned

Value



option

2 2




Assessment Item:


35/39

Refer to the exhibit. EIGRP is correctly configured on router Remote and router HQ. A n

technician is configuring a backup route on router Remote to network 198.133.219.32 viBranch. Which configuration option will successfully create the backup route?

Remote(config)# ip route 198.133.219.32 255.255.255.224 198.133.219.9

Remote(config)# ip route 198.133.219.32 255.255.255.224 198.133.219.9 85



Reset

ViewLearner

Response


Value

Earned

Value

1correctness of

response



option

2 0



8.1.2 Testing WAN Connectivity with Simulation Software

Assessment Item:


36/39

Refer to the exhibit. Router R1 is unable to establish a usable connection with r

the interfaces that are shown in the exhibit. What is a possible cause of this con

There is an encapsulation mismatch.

The bandwidth settings on the serial connection are not the same.

A clock rate has not been set on the appropriate DTE interface.

A shutdown command has been issued on the serial 0/1/0 interface on R2.

Reset View

Learner Response


Value

Earned

Value

1correctness of

response



option

2 0



6.3.1 Contrasting IPv4 and IPv6 Addressing

Assessment Item:


37/39

What value is an alternative representation of the IPv6 address

2001:DB80:0000:0000:0C41:3EFF:FE00:0000?

2001:DB8::C41:3EFF:FE:

2001:DB80::C41:3EFF:FE00::

2001:DB80::C41:3EFF:FE00:0

2001:DB80:0:0:0:C41:3EFF:FE::

Reset View Learner

Response


Value

Earned

Value

1correctness of

response



option

2 2



8.1.3 Simulating WAN Connectivity in a Lab Environment

Assessment Item:


38/39

Refer to the exhibit. A technician at the ISP site asks the network administrator at the cchange the CHAP password as part of the routing security maintenance. After the admi

the change and reboots the router, the technician issues a show interfaces serial 0/0/0

According to the output, what can be concluded about the serial connection between thISP site?

The router at the client site is still in the process of rebooting.

The administrator probably configured the wrong password.The administrator has not issued a no shut command on the serial interface.

The administrator probably configured the wrong IP address for the serial interface

Reset ViewLearner

Response


Value

Earned

Value

1correctness of

response


option

2 0





39/39

Assessment Item:

A company uses the Frame Relay network to establish a VPN connection headquarters and the branch office. The company wants to add a backup l

Frame Relay connection fails. The backup link will use the business DSL

through another ISP. How should the router be configured to include the bCreate a static route with the administrative distance of 1.

Create a floating static route.

Add a new route to the routing protocol configuration.

Create a second default route for the backup path.

Reset View Learner

Response


Value

Earned

Value

1correctness of

response



option

2 0

Documents

Ccna Voucher Forml 1a