CCIE Wireless Written Exam Topics v2 · 2011-11-29 · CCIE Wireless Written Exam Topics v2.0 The comprehensive CCIE Wireless written exam (#350-050) has 90-100 multiple-choice questions

Cisco’s CCIE Wireless Version 2.0 Exam Data

All Rights Reserved © 2011, Fast Lane US Page 1

CCIE Wireless Written Exam Topics v2.0

The comprehensive CCIE Wireless written exam (#350-050) has 90-100 multiple-choice questions and is two hours in duration. The topic areas listed are general guidelines for the type of content that is likely to appear on the exam. Please note, however, that other relevant or related topic areas may also appear.

Exam Sections and Sub-task Objectives

1.00 Planning & Designing 802.11 Wireless Technologies

1.01 WLAN organizations and regulations

1.02 IEEE 802.11 Standards and Protocols

1.03 Wireless Security Concept & Protocols

(a) L2/L3/L4 Traffic restrictions

(b) Management access restrictions

(c) Layer 2/3 security

(d) WPS, MFP, NAC

1.04 Plan & design Wireless solutions requirements

(a)Translate customer requirements into services and design recommendations

(b)Identify ambiguity and/or information gaps

(c)Evaluate interoperability of proposed technologies against deployed IP network infrastructure & technologies

(d) Suggest deployment model

1.05 RF Planning

(a) Define the tasks/goals for a preliminary site survey

(b) Conduct the site survey

(c) Determine AP quantity, placement and antenna type

(d) Draft an RF operational model that includes:

(1) Radio resource management (Auto-RF, manual, hybrid, TPC and DCA)

(2) Channel use (Radar, other non-WiFi interference)

(3) Power level, overlap

(e) Audit and optimize existing RF deployments

(f) RF design for indoor and outdoor deployments

2.00 Configure and Troubleshoot L2/L3 network infrastructure to support WLANs

2.01 Configure and troubleshoot wired infrastructure to support WLAN's

(a) VLANs

Fast Lane’s CCIE Wireless

Certification Programs:

CCIE Wireless Mentored-Learning Program

CCIE Wireless V2.0 Lab Bootcamp

CCIE Wireless Written Bootcamp

CCIE Wireless Remote Lab Rental

CCIE Wireless Workbook V 2.0

CCIE Wireless V2.0 Workbook / Lab Package

http://www.fastlaneus.com/course/fl-cciewl

http://www.fastlaneus.com/course/fl-ccieww

http://www.fastlaneus.com/product/fl-cciew-rl

http://www.fastlaneus.com/product/fl-cciew-wb

http://www.fastlaneus.com/product/fl-cciew-wbp1



(b) VTP

(c) STP

(d) Etherchannel

(e) HSRP

(f) VSS

2.02 Network infrastructure capacity planning

2.03 Configure and troubleshoot network connectivity for :

(a) WLAN Clients

(b) Standalone WLCs

(c) Integrated WLCs

(d) Lightweight APs

(e) Autonomous Aps

2.04 Configure and troubleshoot PoE for AP's

2.05 Configure and troubleshoot QoS on the switching infrastructure

2.06 Configure and troubleshoot Multicast on the switching infrastructure

2.07 Configure and troubleshoot basic IPv4 connectivity

(a) Subnetting

(b) Static routing

(c) basic OSPF

(d) basic EIGRP


(a) Subnetting

(b) Static routing

2.09 Configure and troubleshoot wired security

(a) ACLs

(b) dot1x, mac filtering

3.00 Configure and Troubleshoot Infrastructure Application Services

3.01 Configure and troubleshoot DNS, DHCP, NTP , SYSLOG, SNMP

3.02 Configure and troubleshoot AAA Server Infrastructure

(a) client authentication

(b) management authentication

(c) Basic PKI for dot1x and webauth

4.00 Configure and Troubleshoot Autonomous deployment model

4.01 Configuring and controlling management access

4.02 Configuring and Troubleshooting network services

(a) NTP

(b) SYSLOG

4.03 Configuring and troubleshooting different modes and roles

(a) Root

(b) WGB

(c) Bridge



4.04 Configuring and troubleshooting SSID/MBSSID

4.05 Configuring and troubleshooting Security

(a) L2 security policies

(b) association filters

(c) MFP

(d) peer to peer blocking

(e) Local radius

(f) dot1x profiles

4.06 Configuring and troubleshooting Radio Settings

4.07 Configuring and troubleshooting IGMP snooping

4.08 Configuring and troubleshooting QOS

4.09 Configuring and troubleshooting WDS (L2)

4.10 Upgrade Autonomous to Unified

5.00 Configure and Troubleshoot Unified deployment model



(a) NTP

(b) SYSLOG

(c) DHCP

(d) DNS

5.03 Configuring and Troubleshooting Interface settings

5.04 Configuring and Troubleshooting Light Weight AP

(a) dot1x

(b) locally significant certificates

(c) office extend

(f) AP Modes

(g) AP Authentication / authorization

(h) High availability

(i) Logging

(j) local / global configuration

5.05 Configuring and Troubleshooting AP groups

5.06 Configuring and Troubleshooting WLANs

(a) client exclusion

(b) load-balancing

(c) band select

(d) passive clients

(e) DHCP policies

(f) multicast VLAN

(g) radio policies

5.07 Configuring and troubleshooting HREAP

(a) local auth



(b) h-reap groups

(c) h-reap local switching

(d) address learning


(a) client link

(b) power

(c) channel settings

(d) antenna selection

(e) beaconing

(f) data rates

(g) channel bonding

(h) Cleanair

EDDRRM

Interferer detection

air qualilty

5.09 Implement RRM/ AutoRF

(a) country selection

(b) CHD, DCA, TPC

(c) RF groups

(d) profiles

5.10 Implement Local DHCP services for clients

5.11 Configuring and troubleshooting Security settings

(a) L2 security policies (802.11i, static dynamic WEP, mac filtering, etc..)

(b) AAA (WLC to Radius/LDAP)

(c) local EAP authentication (against local user list, and external LDAP)


(e) L3 security policies (Webauth, pass-through)

(f) WPS settings (IDS...)

(g) ACL Interface/CPU/WLAN

(h) NAC

(i) MFP

5.12 Configuring and troubleshooting mobility

(a) L2/L3 roaming

(b) multicast optimization

(c) mobilty group scaling

(d) inter-release controller mobility groups

5.13 Configuring and troubleshooting controller redundancy/fallback (APs and clients)

5.14 Configuring and troubleshooting wired and wireless Guest

4.13 Configuring and troubleshooting multicast


(a) BW profile metal



(b) EDCA

(c) BW restrictions

(d) per user BW roles

5.16 Configuring and troubleshooting Mesh

(a) AP authorization

(b) BGN

(c) Ethernet bridging

(d) serial backhaul

6.00 Configure and Troubleshoot WCS

6.01 Configure and troubleshoot management access

(a) AAA

(b) virtual domain

6.02 Configure and troubleshoot NTP

6.03 Perform basic Operations

(a) Create and deploy templates, template groups

(b) Create a floor coverage proposal

(c) Prepare the building/floor map

(d) Implement controllers to WCS

(e) high availability

(f) AP placement

(g) understand license managing

(h) Mesh monitoring

(i) audits

6.04 Performing maintenance operations

(a) backups

(b) WCS upgrade

(c) WLC upgrade

(d) MSE upgrade

(e) client troubleshooting

(f) AP conversion

(g) logging

6.05 Security management

(a) audit configuration

(b) Rogue Detection, classification and management

(c) Alerts

(d) Alarms and Events

(e) security index

(f) IDS / WIPS

(g) RF Management

RRM events

Cleanair



(h) Service levels

6.06 Implement MSE

(a) Configuring and troubleshooting management access

(b) Implement network services

(c) Performing maintenance operations

7.00 Configure and Troubleshoot WLAN Services

7.01 Understand Service characteristics, capabilities and limitations

7.02 Voice for autonomous deployments

(a) RF Design considerations

(b) Implement the network infrastructure to support Voice over Wireless

(c) General configuration settings

(d) Security settings

(e) CAC

(f) Audit Voice deployments

7.03 Voice for unified deployments





(e) CAC


7.04 Video


(b) Implement the network infrastructure to support Video over Wireless


(d) CAC

7.05 Context aware services

(a) RF Design Considerations

(b) Location

(c) Notifications



CCIE Wireless Lab Exam Topics v2.0

The following topics are general guidelines for the content likely to be included on the lab exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.

Exam Sections and Sub-task Objectives

1.00 Configure and Troubleshoot L2/L3 network infrastructure to support WLANs

1.01 Configure and troubleshoot wired infrastructure to support WLAN's

(a) VLANs

(b) VTP

(c) STP

(d) Etherchannel

(e) HSRP

(f) VSS

1.02 Configure and troubleshoot network connectivity for

(a) WLAN Clients

(b) Standalone WLCs

(c) Integrated WLCs

(d) Lightweight APs

(e) Autonomous Aps

1.02 Configure and troubleshoot PoE for AP's

1.03 Configure and troubleshoot QoS on the switching infrastructure

(a) classification

(b) end-to-end qos

1.04 Configure and troubleshoot Multicast on the switching infrastructure

(a) static multicast routing

(b) PIM

(c) igmp


(a) Subnetting

(b) Static routing

(c) basic OSPF

(d) basic EIGRP


(a) Subnetting
















(b) Static routing

1.07 Configure and troubleshoot wired security

(a) ACLs

(b) mac filtering / port-security

1.08 Implement client to connect/authenticate to SSIDs

2.00 Configure and Troublehoot Infrastructure Application Services

2.01 Configure and troubleshoot DNS, DHCP, NTP , SYSLOG, SNMP

2.02 Configure and troubleshoot AAA Server Infrastructure

(a) client authentication

(b) management authentication

(c) Basic PKI for dot1x and webauth

3.00 Configure and Troubleshoot Autonomous deployment model



(a) NTP / sntp

(b) SYSLOG

3.03 Configuring and troubleshooting different modes and roles

(a) Root

(b) WGB

(c) Bridge

3.04 Configuring and troubleshooting SSID/MBSSID, including Bridging groups

3.05 Configuring and troubleshooting Security

(a) L2 security policies

(b) association filters

(c) MFP


(e) Local radius

(f) dot1x profiles


3.07 Configuring and troubleshooting IGMP snooping


3.09 Configuring and troubleshooting WDS (L2)

3.10 Upgrade Autonomous to Unified

4.00 Configure and Troubleshoot Unified deployment model


4.02 Configuring and troubleshooting discovery mechanisms


(a) NTP

(b) SYSLOG

(c) DHCP

(d) DNS



4.04 Configuring and Troubleshooting Interface settings

4.05 Configuring and Troubleshooting unified AP

(a) dot1x

(b) locally significant certificates

(c) office extend

(f) AP Modes

(g) AP Authentication / authorization

(h) High availability

(i) Logging

(j) local / global configuration

4.06 Configuring and Troubleshooting AP groups

4.07 Configuring and Troubleshooting WLANs

(a) client exclusion

(b) load-balancing

(c) band select

(d) passive clients

(e) DHCP policies

(f) multicast VLAN

(g) radio policies

4.08 Configuring and troubleshooting HREAP

(a) local auth

(b) h-reap groups

(c) h-reap local switching

(d) address learning


(a) client link

(b) power

(c) channel settings

(d) antenna selection

(e) beaconing

(f) data rates

(g) channel bonding

(h) Cleanair

EDDRRM

Interferer detection

air qualilty

4.10 Implement RRM/ AutoRF

(a) country selection

(b) CHD, DCA, TPC

(c) RF groups

(d) profiles



4.11 Implement Local DHCP services for clients

4.12 Configuring and troubleshooting Security settings

(a) L2 security policies (802.11i, static dynamic WEP, mac filtering, etc..)

(b) AAA (WLC to Radius/LDAP)

(c) local EAP authentication (against local user list, and external LDAP)


(e) L3 security policies (Webauth, pass-through)

(f) WPS settings (IDS...)

(g) ACL Interface/CPU/WLAN

(h) NAC

(i) MFP

4.13 Configuring and troubleshooting mobility

(a) L2/L3 roaming

(b) multicast optimization

(c) mobilty group scaling

4.14 Configuring and troubleshooting controller redundancy/fallback (APs and clients)

4.15 Configuring and troubleshooting Guest

(a) wired

(b) wireless

4.16 Configuring and troubleshooting multicast


(a) BW profile metal

(b) EDCA

(c) BW restrictions

(d) per user BW roles

4.18 Configuring and troubleshooting Mesh

(a) AP authorization

(b) BGN

(c) Ethernet bridging

(d) serial backhaul

5.00 Configure and Troubleshoot WCS

5.01 Configure and troubleshoot management access

(a) AAA

(b) virtual domain

5.02 Configure and troubleshoot NTP

5.03 Perform basic Operations

(a) Create and deploy templates, template groups

(b) Create a floor coverage proposal

(c) Prepare the building/floor map

(d) Implement controllers to WCS

(e) high availability



(f) AP placement

(g) Mesh monitoring

(h) voice audits and location readiness

5.04 Performing maintenance operations

(a) backup / restore

(b) client troubleshooting

(c) AP conversion

(d) logging

5.05 Security management

(a) audit configuration

(b) Rogue Detection, classification and management

(c) Alerts

(d) Alarms and Events

(e) security index

(f) IDS / WIPS

(g) Service Levels

5.06 RF Management

(a) RRM events

(b) Cleanair

5.07 Implement MSE

(a) Configuring and troubleshooting management access

(b) Implement network services

(c) Performing maintenance operations

6.00 Configure and Troubleshoot WLAN Services

6.01 Voice for autonomous deployments





(e) CAC


6.02 Voice for unified deployments





(e) CAC


6.03 Video


(b) Implement the network infrastructure to support Video over Wireless




(d) CAC

6.04 Context aware services

(a) RF Design Considerations

(b) Location

(c) Notifications



CCIE Wireless Lab Exam Checklist

Please be advised that this topic checklist is not an all-inclusive list of Cisco CCIE Wireless lab exam subjects. Instead, we provide this outline as a supplement to the existing lab exam topics to help candidates prepare for their lab exams. Other relevant or related topics may also appear in the actual lab exam.

1.0

Implementing the Network Infrastructure to Support WLANs

Configuring and Troubleshooting the Network Infrastructure to Support WLANs 1.01. Cisco Discovery Protocol 1.02. VTP Modes (Server, Client, Transparent) 1.03. VLANs vs. Routed Interfaces 1.04. Trunks vs. Access Ports 1.05. Load Balancing 1.06. Link Aggregation 1.07. Spanning Tree Protocol Manipulations 1.08. HSRP

1.09. Implementing Initial Network Connectivity in WLCs (Management Interface, AP-Manager, Virtual Interface, Service Port Interface, Dynamic Interface Configuration)

1.10. VLAN Filtering 1.11. WLC as DHCP Server 1.12. Wireless Services Module (WiSM) Setup 1.13. Configuring Power over Ethernet

1.14. Configuring Client Supplicant (ADU, CSSC) to Connect and Authenticate to SSIDs Using EAP, PEAP, EAP-FAST, LEAP and EAP-TLS, WEP, WPA, and WPAv2

1.15. Implementing Relevant Network and Management Services on Switches, APs, LWAPPs, Location Appliance Server, WLCs, and Cisco WCS (NTP, Syslog, DHCP, SNMP, FTP, TFTP, HTTP, HTTPS, Telnet, SSH)

1.16. Implementing QoS Services over the Wired Infrastructure 1.17. Configuring Marking Using DSCP 1.18. Configuring Marking Using IP Precedence 1.19. Configuring Marking Using CoS 1.20. Configuring CoS to DSCP Mappings 1.21. Configuring Policing (Modular QoS) 1.22. Static Routing 1.23. Basic Dynamic Routing (OSPF, EIGRP) 1.24. Subnetting

1.25. Troubleshooting Basic Network Connectivity Issues Using Traceroute, Extended Ping, Debugs, etc.

1.26. Implementing Basic Enterprise Multicast (IGMP, PIM)

2.0 Implementing Autonomous Infrastructure
















Configuring and Troubleshooting Autonomous Infrastructure 2.01. Implementing VLAN Trunking 2.02. Understanding Mode of Operation for WDS and Infrastructure APs 2.03. Implementing a WDS Solution 2.04. Implementing a WDS Solution Using a RADIUS Server 2.05. Implementing WDS Server Groups 2.06. Configuring Infrastructure APs to Use the WDS Service

2.07. Understanding the EAP Protocols That Are Supported from a Cisco IOS AP Configured as a Local Authenticator

2.08. Configuring NAS Devices to Use the Local Authenticator AP 2.09. MAC Authentication vs. EAP Authentication 2.10. Assigning Shared Settings from a Group of Users, Such as SSID, VLAN, etc. 2.11. Troubleshooting Failing Authentications 2.12. Configuring SSID and MBSSID on the Autonomous AP 2.13. Configuring and Assigning Different Characteristics to an SSID

2.13.1. Security 2.13.2. Authentication 2.13.3. Encryption 2.14. Mapping VLANs to SSIDs 2.15. Advanced Radio Setting Parameters (Such as DTIM) 2.16. Advertising (or Hiding) SSID Presence to WLAN Clients 2.17. Understanding Radio Roles and Their Individual Attributes 2.18. AP External Antenna Settings 2.19. Impact of the Antenna Characteristics Settings 2.20. Configuring Filters on AP Radio Interfaces 2.21. AP Access Management 2.22. Management Frame Protection 2.23. Implementing Multicast Settings (IGMP, PIM) 2.24. Implementing Wireless QoS 2.25. Implementing Peer-to-Peer Blocking 2.26. Configuring Client Access Limitations 2.27. Troubleshooting Bridge Connectivity Problems 2.28. Bridging Multiple VLANs Across a Point-to-Point Link 2.29. Filtering VLANs Across a Point-to-Point Link

2.30. Determining and Troubleshooting the Parent-Child Relationship in an 802.11 Bridge Link

2.31. Fine-Tuning Point-to-Point Connections to Maintain a Reliable Link

2.32. Converting Autonomous APs to LWAPP APs Using Different Methods (Upgrade Tool, Cisco WCS Templates)

3.0

Implementing a Unified Infrastructure

Configuring and Troubleshooting a Unified Infrastructure

3.01. WLC Interface Settings (Management Interface, AP-Manager Interface, Virtual Interface, Service Port Interface, Dynamic Interface)

3.02. WLC – Tagged vs. Untagged Interfaces 3.03. WLC – Link Aggregation (LAG vs. Backup Interface) 3.04. WLC – SNMP 3.05. Mobility – Asymmetric vs. Symmetric Tunneling 3.06. Mobility Anchor 3.07. Mobility – Layer 2 and Layer 3 Roaming 3.08. Mobility – AP Failover Within a Mobility Group



3.09. Mobility – AP Failover Outside a Mobility Group 3.10. Troubleshooting Roaming Issues 3.11. Implementing WLANs 3.12. WLAN to Interface Mapping 3.13. WLANs – Configuring DHCP (on Cisco IOS Software, Windows Server, and WLCs) 3.14. WLANs – Configuring Peer-to-Peer Blocking 3.15. WLANs – Configuring Layer 2 Security

3.15.1. 802.1X 3.15.2. WPA vs. WPA2 3.15.3. Static WEP 3.15.4. Cisco Key Integrity Protocol 3.15.5. TKIP 3.15.6. Cisco Centralized Key Management 3.15.7. PSK 3.15.8. AES 3.16. WLANs – Configuring WLAN Override 3.17. WLANs – Configuring Access Point Groups 3.18. WLANs – Configuring Radio Policies 3.19. WLANs – Configuring AP Modes (Local, H-REAP, Monitor, Sniffer, Rogue Detector) 3.20. WLANs – Configuring WLAN QoS Settings 3.21. WLANs – Cisco Aironet Extensions 3.22. WLANs - Client Exclusion 3.23. WLANs – Web Authentication 3.24. Implementing Ethernet Multicast Support on the WLC 3.25. Configuring a Multicast IP Address 3.26. Implementing and Controlling Management Access 3.27. Different ACL Types 3.28. CPU ACL 3.29. Configuring Device Access Control 3.30. Configuring Local Management Users

3.31. Configuring Cisco Secure ACS (TACACS+ and RADIUS) for Authenticating, Authorizing, and Accounting

3.32. Management Users 3.33. Controller Redundancy 3.34. Configuring Primary, Secondary, and Tertiary Controllers 3.35. Implementing LWAPP Discovery Mechanisms

3.35.1. OTAP 3.35.2. Cisco IOS DHC 3.35.3. DHCP Option 43 3.35.4. Windows DHCP Server 2003 3.35.5. Windows 2003 DNS 3.35.6. Troubleshooting the Discovery Process 3.36. Implementing Auto-RF to Adapt to Site Requirements 3.37. 802.11h 3.38. Radio Resource Management Settings:

3.38.1. Coverage Hole Detection Tuning 3.38.2. Dynamic Channel Assignment (DCA) vs. Static 3.38.3. Dynamic Transmit Power Control (DTPC) vs. Static 3.38.4. RF Groups 3.39. Validating Trap Generation, Notifications in Cisco WCS and WLC 3.40. Wireshark and Cisco Spectrum Expert



4.0

Implementing Unified Controllers and APs

Configuring and Troubleshooting Unified Controllers and APs 4.01. Implementing Peer-to-Peer Blocking 4.02. Implementing Security

4.02.1. Configuring WPS Settings 4.02.2. Configuring MFP and AP Authentication 4.02.3. Configuring AP Authorization 4.02.4. Rogue APs 4.02.5. Configuring WLC IDS 4.02.6. Configuring EAP-FAST 4.02.7. Configuring EAP-TLS 4.02.8. Configuring PEAP 4.02.9. Configuring LEAP 4.03. Applying an Access Control List to an Interface 4.04. Applying an Access Control List to the Controller CPU 4.05. Applying an Access Control List to a WLAN 4.06. Implementing Wireless QoS 4.07. 802.11e Configuration (EDCA, WMM, etc.) 4.08. Implementing Local EAP Authentication Against the Local User List 4.09. Implementing Local EAP Authentication Against an External LDAP 4.10. Implementing Layer 3 Security Policies (Web Authentication, Pass-Through, ACLs) 4.11. Creating Guest User Accounts 4.12. Lobby Ambassador 4.13. Web Authentication 4.14. Configuring Wired Guest Access (With or Without Anchor Controller) 4.15. Configuring Wireless Guest Access (With or Without Anchor Controller) 4.16. Anchor Controller 4.17. Implementing Layer 2 Security Policies

4.17.1. 802.1X 4.17.2. WPA vs. WPA2 4.17.3. Static WEP 4.17.4. Cisco Key Integrity Protocol 4.17.5. TKIP 4.17.6. Cisco Centralized Key Management 4.17.7. PSK 4.17.8. AES 4.17.9. Mac Filtering 4.18. Implementing Local DHCP Services for Clients on the WLC 4.19. Implementing AAA (WLC to RADIUS and LDAP) 4.20. Configuring the Cisco Secure ACS (RADIUS, TACACS+) Server

4.20.1. ACS – User Setup Parameters 4.20.2. ACS – Group Setup Parameters 4.20.3. ACS – Network Configuration Parameters 4.20.4. ACS – System Configuration Parameters 4.20.5. ACS – External User Database Settings 4.20.6. ACS – Reports and Activity 4.20.7. ACS – Create and Enroll Server Certificate 4.20.8. ACS – Global Authentication 4.20.9. ACS – Group Mappings

4.20.10. ACS – VLAN Assignment



4.21. Adding AAA Clients

4.22. Troubleshooting Client Connectivity Problems Using Extended Pings, Traceroute, and Debugs

5.0

Implementing Cisco Unified WCS and Location

Configuring and Troubleshooting Cisco Unified WCS and Location 5.01. Managing Cisco WCS User Accounts 5.02. Adding Controllers to Cisco WCS 5.03. Implementing Location Appliance Server to Cisco WCS 5.04. SNMP 5.05. Creating and Deploying Controller Templates 5.06. Preparing Import Building and Floor Map

5.06.1. AP Placement 5.06.2. Antenna Orientation 5.06.3. Calibration 5.07. Creating a Floor Coverage Proposal Using the Planning Mode Tool 5.08. Performing Maintenance Operations 5.09. Performing System Tasks 5.10. Tracking Parameters 5.11. Filtering Parameters 5.12. History Parameters 5.13. Notification Parameters 5.14. Asset Information 5.15. Tune Location Services

5.15.1. Tracking Parameters 5.15.2. Notifications 5.15.3. Timers 5.16. Validating Client Connectivity and Troubleshooting the Client via Cisco WCS and WLC 5.17. Validating Location Information in Cisco WCS and WLC 5.18. Validating Security Events with Cisco WCS and WLC

5.18.1. IDS 5.18.2. Rogue Detection, Management 5.18.3. Alarms and Events 5.18.4. Alerts 5.19. Validating Trap Generation and Notifications in Cisco WCS and WLC 5.20. Running Reports 5.21. Troubleshooting Client Roaming 5.22. Troubleshooting Client Connectivity Issues

6.0

Implementing Voice over Wireless

Configuring and Troubleshooting Voice over Wireless

6.01. Implementing Support for Cisco Unified Wireless IP Phone 7920 and 7921 Deployments for both Unified and Autonomous

6.02. Configuring Cisco Unified Wireless IP Phone 7920 and 7921 to Join the Call Manager 6.03. Cisco Unified Wireless IP Phone 7920 and 7921 Profile Configuration

6.04. Implementing Security Settings (Encryption and Authentication) on Phone and Infrastructure

6.04.1. 802.1X 6.04.2. WPA vs. WPA2 6.04.3. Static WEP 6.04.4. Cisco Key Integrity Protocol



6.04.5. TKIP 6.04.6. Cisco Centralized Key Management 6.04.7. PSK 6.04.8. AES 6.05. Fast Secure Roaming 6.06. Configuring Voice QoS

6.06.1. EDCA 6.06.2. WMM 6.06.3. CAC 6.06.4. 802.11e 6.07. Configuring End-to-End QoS Marking (over Both Wired and Wireless Infrastructure) 6.08. Audit Voice Deployment 6.09. Troubleshooting Connectivity Issues



Lab Exam v2.0 - Lab Equipment and

Software

Lab Equipment

1) Cisco Wireless Access Points: a) Cisco Aironet 1260 Series (Lightweight and

Autonomous version) b) Cisco Aironet 1040 Series c) Cisco Aironet 3500 Series

2) Cisco Wireless LAN Controllers: a) Cisco 5500 Series Wireless Controllers

3) Mobility Services a) Cisco 3300 Series Mobility Services Engine

4) Cisco Wireless Phones: a) Cisco Unified Wireless IP Phone 7925G

5) Cisco Catalyst Switches: a) Cisco Catalyst 3560-E Series Switches b) Cisco Catalyst 2960 Series Switches c) Cisco Catalyst 6500-E Series Switches

6) Cisco Secure Access Control Server for Windows (ACS) 7) Cisco Wireless Control System (WCS)

Software

1. Cisco Unified Wireless Network Software Release 7.0 2. Cisco Unified Wireless Network Software Release 7.0 for Cisco 5500 Series Wireless

Controllers 3. Cisco Aironet 1260 Series IOS Software Release 12.4 (25d)JA 4. Cisco Catalyst 6500 SUP720/MSFCC3 IOS Software Release 12.2 SXI IP SERVICES

feature set 5. Cisco Catalyst 2960 Series Switches IOS Software Release 12.2 SE LAN BASE feature

set 6. Cisco Catalyst 3560E Series Switches IOS Software Release 12.2 SE UNIVERSAL

feature set 7. Cisco Wireless Control System version 7.0 8. Cisco Secure ACS for Windows version 5.2 9. Cisco AnyConnect Secure Mobility Client Release 3.0

Tools

1. Cisco Spectrum Expert 2. Wireshark 3. WCS 7.0














Documents

CCIE Wireless Written Exam Topics v2 · 2011-11-29 · CCIE Wireless Written Exam Topics v2.0 The comprehensive CCIE Wireless written exam (#350-050) has 90-100 multiple-choice questions