CCIE 360 R&S Advanced Workshop 1store.globalknowledge.net/course-overviews/ES/CIERS1_CO_.pdf · Cisco Network Troubleshooting QoS Concepts DHCPv6 Lab 8-1: Implementing FHRP for IPv4

CIERS1 www.globalknowledge.es [email protected] (34) 91 425 06 60

CCIE 360 R&S Advanced Workshop 1

Duración: 5 Días Código del Curso: CIERS1 Método de Impartición: Curso Cerrado (In-Company)

Temario:

This 5 day course provides knowledge and hands-on experience related to both configuring and troubleshoting the following Cisco Routing andSwitching topics:Cisco Catalyst Switch core configuration tasks, Interior gateway protocols (IGPs): Open Shortest Path First (OSPF),Enhanced Interior Gateway Routing Protocol (EIGRP), and Routing Information Protocol version 2 (RIPv2), Route redistribution, BorderGateway Protocol (BGP), MPLS Layer 3 VPN’s, IP multicast, Router and Cisco Catalyst quality of service (QoS). After completing the lectureson these technologies that include best practice you will complete labs based on that specific technology. If you have purchased the CCIE 360 E-learning Packages, please do not attempt the 360RSW05-LAB-GA01 or 360RSW05-LAb-GA02 beforeattending this class. Students will also be given access to the Configuration Assessment Lab 12 for Self Scheduling after the class. Students booking this workshop as a standalone product, not bundled with e-learning will also receive access to preassessment lab, Workbook(20 labs) Reference Library 200 hours virtual rack rental and access to Configuration Assessment Lab 12.

Dirigido a:

This course is recommended for CCIE candidates who are preparing for the CCIE Routing and Switching Lab Exam.

Objetivos:

After attending this course you should be able to: Resolve expert-level MPLS L3 VPN configuration tasks.

Describe the Cisco 360 Learning Program for CCIE R&S andexplain how it addresses expert-level networking issues

Resolve expert-level multicast task analysis, configuration, andtroubleshooting issues

Discuss your baseline status for Cisco CCIE® lab readiness

Resolve expert-level IP connectivity issues regardless of whetherthey involve IPv4 or IPv6

Resolve expert-level Layer 2 and DMVPN task analysis,configuration and troubleshooting issues

Resolve expert-level router MQC QoS task analysis, configuration,and troubleshooting issues

Resolve expert-level core task analysis, configuration, andtroubleshooting issues

Resolve expert-level Network Services task analysis, configuration,and troubleshooting issues

Resolve expert-level BGP issues from both a configuration andtroubleshooting perspective

Resolve expert-level multitopic core and advanced task analysis,configuration, and troubleshooting issues

Prerequisitos: Exámenes y certificación

Attendees should meet the following prerequisites: Recommended as preparation for:

A valid CCNP or CCIP certification or equivalent understanding of The Cisco CCIE Practical Exam.configuring and troubleshooting data link layer technologies, IGProuting protocols, basic redistribution and BGP. The CCIE lab exam is an eight-hour, hands-on exam which requiresAttained a passing score on the CCIE written exam 350-001 you to configure and troubleshoot a series of complex networks to


given specifications. Knowledge of troubleshooting is an importantskill and candidates are expected to diagnose and solve issues aspart of the CCIE lab exam. You will not configure end-user systems,but are responsible for all devices residing in the network (hubs, etc.).Point values and testing criteria are provided.

More details on scheduling your CCIE Lab Exam can be found athttp://www.cisco.com/web/learning/le3/ccie/rs/lab_exam.html

Siguientes cursos recomendados:

The following courses and program components are re commended for further study

CCIERS2 - CCIE 360 R&S Advanced Workshop 2CCIE 360 R&S Exercise Workbook and Practice Labs


Contenido:

Cisco 360 Learning Program for CCIE R;S Cisco Network Services Task Analysis andline line Configuration

Introducing the Cisco 360 Learning Program Preparing for the Cisco CCIE Lab Exam linefor CCIE R;S Lab 2-1: CIERSASSESS-1 - 9 hour Lab Cisco Network Services per the CCIE R;S

Analyzing the Cisco 360 CCIE R;S v5.0 Blue PrintAssessment Results Report

line Resolving Layer 2 TasksPreparing for the Cisco CCIE Lab Exam Resolving IGP Tasks lineLab 2-1: CIERSASSESS-1 - 9 hour Lab Resolving Redistribution Tasks Preparing for the Cisco CCIE Lab Exam Analyzing the Cisco 360 CCIE R;S Resolving Advanced BGP Tasks Lab 2-1: CIERSASSESS-1 - 9 hour LabAssessment Results Report Lab 4-1: Establishing Basic Connectivity Analyzing the Cisco 360 CCIE R;SResolving Layer 2 Tasks for BGP Assessment Results ReportResolving IGP Tasks Lab 4-2: Configuring BGP Resolving Layer 2 TasksResolving Redistribution Tasks Lab 4-3: Filtering BGP Updates and Path Resolving IGP TasksResolving Advanced BGP Tasks Determination Resolving Redistribution Tasks Lab 4-1: Establishing Basic Connectivity for Lab 5-1: Establishing Basic Connectivity Resolving Advanced BGP TasksBGP for MPLS Layer 3 VPNs Lab 4-1: Establishing Basic ConnectivityLab 4-2: Configuring BGP Lab 5-2: Configuring the MPLS Core for BGPLab 4-3: Filtering BGP Updates and Path Lab 5-3: Creating VPNs and Enabling Lab 4-2: Configuring BGPDetermination VPN Routing Lab 4-3: Filtering BGP Updates and PathLab 5-1: Establishing Basic Connectivity for Lab 5-4: Adding a Backup Link in VPNA Determination MPLS Layer 3 VPNs Lab 6-1: Establishing Basic Connectivity Lab 5-1: Establishing Basic ConnectivityLab 5-2: Configuring the MPLS Core for Multicast for MPLS Layer 3 VPNsLab 5-3: Creating VPNs and Enabling VPN Lab 6-2: Configuring Dense Mode IP Lab 5-2: Configuring the MPLS CoreRouting Multicast Routing Lab 5-3: Creating VPNs and Enabling VPNLab 5-4: Adding a Backup Link in VPNA Resolving PIM Sparse Mode Multicast RoutingLab 6-1: Establishing Basic Connectivity for Tasks Lab 5-4: Adding a Backup Link in VPNAMulticast Lab 6-3: Configuring PIM Sparse Mode Lab 6-1: Establishing Basic ConnectivityLab 6-2: Configuring Dense Mode IP Using DiffServ Tools for MulticastMulticast Routing Using Congestion Management and Lab 6-2: Configuring Dense Mode IPResolving PIM Sparse Mode Multicast Avoidance Tools Multicast RoutingTasks Identifying Strategies for Router MQC Resolving PIM Sparse Mode MulticastLab 6-3: Configuring PIM Sparse Mode QoS Tasks TasksUsing DiffServ Tools Lab 7-1: Classification and Marking Lab 6-3: Configuring PIM Sparse ModeUsing Congestion Management and Lab 7-2: Class Based Shaper Using DiffServ ToolsAvoidance Tools Lab 7-3: Class Based Policer Using Congestion Management andIdentifying Strategies for Router MQC QoS Lab 7-4: Congestion Avoidance and Avoidance ToolsTasks Management Identifying Strategies for Router MQC QoSLab 7-1: Classification and Marking Cisco Network Troubleshooting TasksLab 7-2: Class Based Shaper Lab 8-1: Implementing FHRP for IPv4 Lab 7-1: Classification and MarkingLab 7-3: Class Based Policer and IPv6 Lab 7-2: Class Based ShaperLab 7-4: Congestion Avoidance and Lab 8-2: Implementing DHCP and Lab 7-3: Class Based PolicerManagement DHCPv6 Lab 7-4: Congestion Avoidance andCisco Network Troubleshooting Lab 8-3: Implementing NTP Management Lab 8-1: Implementing FHRP for IPv4 and Lab 8-4: Implementing NAT Cisco Network TroubleshootingIPv6 Lab A-1: Establishing Basic Connectivity Lab 8-1: Implementing FHRP for IPv4 andLab 8-2: Implementing DHCP and DHCPv6 for Catalyst Switch QoS IPv6Lab 8-3: Implementing NTP Lab A-2: Exploring Catalyst 3560 Series Lab 8-2: Implementing DHCP andLab 8-4: Implementing NAT QoS Concepts DHCPv6Lab A-1: Establishing Basic Connectivity for Lab A-3: Implementing VLAN-Based QoS Lab 8-3: Implementing NTPCatalyst Switch QoS Lab 8-4: Implementing NAT Lab A-2: Exploring Catalyst 3560 Series Lab A-1: Establishing Basic ConnectivityQoS Concepts line for Catalyst Switch QoSLab A-3: Implementing VLAN-Based QoS Preparing for the Cisco CCIE Lab Exam Lab A-2: Exploring Catalyst 3560 Series

Lab 2-1: CIERSASSESS-1 - 9 hour Lab QoS ConceptsCore Task Assessment Analyzing the Cisco 360 CCIE R;S Lab A-3: Implementing VLAN-Based QoS line Assessment Results Report

Applying the Cisco 360 CCIE R;S Resolving Layer 2 TasksOpening-Moves Strategy to Cisco CCIE Resolving IGP Tasks lineLabs Resolving Redistribution Tasks Preparing for the Cisco CCIE Lab Exam

Resolving Advanced BGP Tasks Lab 2-1: CIERSASSESS-1 - 9 hour LabLab 4-1: Establishing Basic Connectivity Analyzing the Cisco 360 CCIE R;S

line for BGP Assessment Results ReportPreparing for the Cisco CCIE Lab Exam Lab 4-2: Configuring BGP Resolving Layer 2 Tasks


Lab 2-1: CIERSASSESS-1 - 9 hour Lab Lab 4-3: Filtering BGP Updates and Path Resolving IGP TasksAnalyzing the Cisco 360 CCIE R;S Determination Resolving Redistribution Tasks Assessment Results Report Lab 5-1: Establishing Basic Connectivity Resolving Advanced BGP TasksResolving Layer 2 Tasks for MPLS Layer 3 VPNs Lab 4-1: Establishing Basic ConnectivityResolving IGP Tasks Lab 5-2: Configuring the MPLS Core for BGPResolving Redistribution Tasks Lab 5-3: Creating VPNs and Enabling Lab 4-2: Configuring BGPResolving Advanced BGP Tasks VPN Routing Lab 4-3: Filtering BGP Updates and PathLab 4-1: Establishing Basic Connectivity for Lab 5-4: Adding a Backup Link in VPNA Determination BGP Lab 6-1: Establishing Basic Connectivity Lab 5-1: Establishing Basic ConnectivityLab 4-2: Configuring BGP for Multicast for MPLS Layer 3 VPNsLab 4-3: Filtering BGP Updates and Path Lab 6-2: Configuring Dense Mode IP Lab 5-2: Configuring the MPLS CoreDetermination Multicast Routing Lab 5-3: Creating VPNs and Enabling VPNLab 5-1: Establishing Basic Connectivity for Resolving PIM Sparse Mode Multicast RoutingMPLS Layer 3 VPNs Tasks Lab 5-4: Adding a Backup Link in VPNALab 5-2: Configuring the MPLS Core Lab 6-3: Configuring PIM Sparse Mode Lab 6-1: Establishing Basic ConnectivityLab 5-3: Creating VPNs and Enabling VPN Using DiffServ Tools for MulticastRouting Using Congestion Management and Lab 6-2: Configuring Dense Mode IPLab 5-4: Adding a Backup Link in VPNA Avoidance Tools Multicast RoutingLab 6-1: Establishing Basic Connectivity for Identifying Strategies for Router MQC Resolving PIM Sparse Mode MulticastMulticast QoS Tasks TasksLab 6-2: Configuring Dense Mode IP Lab 7-1: Classification and Marking Lab 6-3: Configuring PIM Sparse ModeMulticast Routing Lab 7-2: Class Based Shaper Using DiffServ ToolsResolving PIM Sparse Mode Multicast Lab 7-3: Class Based Policer Using Congestion Management andTasks Lab 7-4: Congestion Avoidance and Avoidance ToolsLab 6-3: Configuring PIM Sparse Mode Management Identifying Strategies for Router MQC QoSUsing DiffServ Tools Cisco Network Troubleshooting TasksUsing Congestion Management and Lab 8-1: Implementing FHRP for IPv4 Lab 7-1: Classification and MarkingAvoidance Tools and IPv6 Lab 7-2: Class Based ShaperIdentifying Strategies for Router MQC QoS Lab 8-2: Implementing DHCP and Lab 7-3: Class Based PolicerTasks DHCPv6 Lab 7-4: Congestion Avoidance andLab 7-1: Classification and Marking Lab 8-3: Implementing NTP Management Lab 7-2: Class Based Shaper Lab 8-4: Implementing NAT Cisco Network TroubleshootingLab 7-3: Class Based Policer Lab A-1: Establishing Basic Connectivity Lab 8-1: Implementing FHRP for IPv4 andLab 7-4: Congestion Avoidance and for Catalyst Switch QoS IPv6Management Lab A-2: Exploring Catalyst 3560 Series Lab 8-2: Implementing DHCP andCisco Network Troubleshooting QoS Concepts DHCPv6Lab 8-1: Implementing FHRP for IPv4 and Lab A-3: Implementing VLAN-Based QoS Lab 8-3: Implementing NTPIPv6 Lab 8-4: Implementing NAT Lab 8-2: Implementing DHCP and DHCPv6 Lab A-1: Establishing Basic ConnectivityLab 8-3: Implementing NTP line for Catalyst Switch QoSLab 8-4: Implementing NAT Preparing for the Cisco CCIE Lab Exam Lab A-2: Exploring Catalyst 3560 SeriesLab A-1: Establishing Basic Connectivity for Lab 2-1: CIERSASSESS-1 - 9 hour Lab QoS ConceptsCatalyst Switch QoS Analyzing the Cisco 360 CCIE R;S Lab A-3: Implementing VLAN-Based QoS Lab A-2: Exploring Catalyst 3560 Series Assessment Results ReportQoS Concepts Resolving Layer 2 TasksLab A-3: Implementing VLAN-Based QoS Resolving IGP Tasks line

Resolving Redistribution Tasks Preparing for the Cisco CCIE Lab Exam Resolving Advanced BGP Tasks Lab 2-1: CIERSASSESS-1 - 9 hour Lab

line Lab 4-1: Establishing Basic Connectivity Analyzing the Cisco 360 CCIE R;SPreparing for the Cisco CCIE Lab Exam for BGP Assessment Results ReportLab 2-1: CIERSASSESS-1 - 9 hour Lab Lab 4-2: Configuring BGP Resolving Layer 2 TasksAnalyzing the Cisco 360 CCIE R;S Lab 4-3: Filtering BGP Updates and Path Resolving IGP TasksAssessment Results Report Determination Resolving Redistribution Tasks Resolving Layer 2 Tasks Lab 5-1: Establishing Basic Connectivity Resolving Advanced BGP TasksResolving IGP Tasks for MPLS Layer 3 VPNs Lab 4-1: Establishing Basic ConnectivityResolving Redistribution Tasks Lab 5-2: Configuring the MPLS Core for BGPResolving Advanced BGP Tasks Lab 5-3: Creating VPNs and Enabling Lab 4-2: Configuring BGPLab 4-1: Establishing Basic Connectivity for VPN Routing Lab 4-3: Filtering BGP Updates and PathBGP Lab 5-4: Adding a Backup Link in VPNA Determination Lab 4-2: Configuring BGP Lab 6-1: Establishing Basic Connectivity Lab 5-1: Establishing Basic ConnectivityLab 4-3: Filtering BGP Updates and Path for Multicast for MPLS Layer 3 VPNsDetermination Lab 6-2: Configuring Dense Mode IP Lab 5-2: Configuring the MPLS CoreLab 5-1: Establishing Basic Connectivity for Multicast Routing Lab 5-3: Creating VPNs and Enabling VPNMPLS Layer 3 VPNs Resolving PIM Sparse Mode Multicast RoutingLab 5-2: Configuring the MPLS Core Tasks Lab 5-4: Adding a Backup Link in VPNALab 5-3: Creating VPNs and Enabling VPN Lab 6-3: Configuring PIM Sparse Mode Lab 6-1: Establishing Basic Connectivity


Routing Using DiffServ Tools for MulticastLab 5-4: Adding a Backup Link in VPNA Using Congestion Management and Lab 6-2: Configuring Dense Mode IPLab 6-1: Establishing Basic Connectivity for Avoidance Tools Multicast RoutingMulticast Identifying Strategies for Router MQC Resolving PIM Sparse Mode MulticastLab 6-2: Configuring Dense Mode IP QoS Tasks TasksMulticast Routing Lab 7-1: Classification and Marking Lab 6-3: Configuring PIM Sparse ModeResolving PIM Sparse Mode Multicast Lab 7-2: Class Based Shaper Using DiffServ ToolsTasks Lab 7-3: Class Based Policer Using Congestion Management andLab 6-3: Configuring PIM Sparse Mode Lab 7-4: Congestion Avoidance and Avoidance ToolsUsing DiffServ Tools Management Identifying Strategies for Router MQC QoSUsing Congestion Management and Cisco Network Troubleshooting TasksAvoidance Tools Lab 8-1: Implementing FHRP for IPv4 Lab 7-1: Classification and MarkingIdentifying Strategies for Router MQC QoS and IPv6 Lab 7-2: Class Based ShaperTasks Lab 8-2: Implementing DHCP and Lab 7-3: Class Based PolicerLab 7-1: Classification and Marking DHCPv6 Lab 7-4: Congestion Avoidance andLab 7-2: Class Based Shaper Lab 8-3: Implementing NTP Management Lab 7-3: Class Based Policer Lab 8-4: Implementing NAT Cisco Network TroubleshootingLab 7-4: Congestion Avoidance and Lab A-1: Establishing Basic Connectivity Lab 8-1: Implementing FHRP for IPv4 andManagement for Catalyst Switch QoS IPv6Cisco Network Troubleshooting Lab A-2: Exploring Catalyst 3560 Series Lab 8-2: Implementing DHCP andLab 8-1: Implementing FHRP for IPv4 and QoS Concepts DHCPv6IPv6 Lab A-3: Implementing VLAN-Based QoS Lab 8-3: Implementing NTPLab 8-2: Implementing DHCP and DHCPv6 Lab 8-4: Implementing NAT Lab 8-3: Implementing NTP Multicast Task Analysis and Configuration Lab A-1: Establishing Basic ConnectivityLab 8-4: Implementing NAT line for Catalyst Switch QoSLab A-1: Establishing Basic Connectivity for Reviewing Basic Multicast Operations Lab A-2: Exploring Catalyst 3560 SeriesCatalyst Switch QoS QoS ConceptsLab A-2: Exploring Catalyst 3560 Series Lab A-3: Implementing VLAN-Based QoS QoS Concepts lineLab A-3: Implementing VLAN-Based QoS Preparing for the Cisco CCIE Lab Exam

Lab 2-1: CIERSASSESS-1 - 9 hour Lab lineCore Task Analysis and Configuration Analyzing the Cisco 360 CCIE R;S Preparing for the Cisco CCIE Lab Exam line Assessment Results Report Lab 2-1: CIERSASSESS-1 - 9 hour Lab

Resolving DMVPN Tasks Resolving Layer 2 Tasks Analyzing the Cisco 360 CCIE R;SResolving IGP Tasks Assessment Results ReportResolving Redistribution Tasks Resolving Layer 2 Tasks

line Resolving Advanced BGP Tasks Resolving IGP TasksPreparing for the Cisco CCIE Lab Exam Lab 4-1: Establishing Basic Connectivity Resolving Redistribution Tasks Lab 2-1: CIERSASSESS-1 - 9 hour Lab for BGP Resolving Advanced BGP TasksAnalyzing the Cisco 360 CCIE R;S Lab 4-2: Configuring BGP Lab 4-1: Establishing Basic ConnectivityAssessment Results Report Lab 4-3: Filtering BGP Updates and Path for BGPResolving Layer 2 Tasks Determination Lab 4-2: Configuring BGPResolving IGP Tasks Lab 5-1: Establishing Basic Connectivity Lab 4-3: Filtering BGP Updates and PathResolving Redistribution Tasks for MPLS Layer 3 VPNs Determination Resolving Advanced BGP Tasks Lab 5-2: Configuring the MPLS Core Lab 5-1: Establishing Basic ConnectivityLab 4-1: Establishing Basic Connectivity for Lab 5-3: Creating VPNs and Enabling for MPLS Layer 3 VPNsBGP VPN Routing Lab 5-2: Configuring the MPLS CoreLab 4-2: Configuring BGP Lab 5-4: Adding a Backup Link in VPNA Lab 5-3: Creating VPNs and Enabling VPNLab 4-3: Filtering BGP Updates and Path Lab 6-1: Establishing Basic Connectivity RoutingDetermination for Multicast Lab 5-4: Adding a Backup Link in VPNALab 5-1: Establishing Basic Connectivity for Lab 6-2: Configuring Dense Mode IP Lab 6-1: Establishing Basic ConnectivityMPLS Layer 3 VPNs Multicast Routing for MulticastLab 5-2: Configuring the MPLS Core Resolving PIM Sparse Mode Multicast Lab 6-2: Configuring Dense Mode IPLab 5-3: Creating VPNs and Enabling VPN Tasks Multicast RoutingRouting Lab 6-3: Configuring PIM Sparse Mode Resolving PIM Sparse Mode MulticastLab 5-4: Adding a Backup Link in VPNA Using DiffServ Tools TasksLab 6-1: Establishing Basic Connectivity for Using Congestion Management and Lab 6-3: Configuring PIM Sparse ModeMulticast Avoidance Tools Using DiffServ ToolsLab 6-2: Configuring Dense Mode IP Identifying Strategies for Router MQC Using Congestion Management andMulticast Routing QoS Tasks Avoidance ToolsResolving PIM Sparse Mode Multicast Lab 7-1: Classification and Marking Identifying Strategies for Router MQC QoSTasks Lab 7-2: Class Based Shaper TasksLab 6-3: Configuring PIM Sparse Mode Lab 7-3: Class Based Policer Lab 7-1: Classification and MarkingUsing DiffServ Tools Lab 7-4: Congestion Avoidance and Lab 7-2: Class Based ShaperUsing Congestion Management and Management Lab 7-3: Class Based PolicerAvoidance Tools Cisco Network Troubleshooting Lab 7-4: Congestion Avoidance and


Identifying Strategies for Router MQC QoS Lab 8-1: Implementing FHRP for IPv4 Management Tasks and IPv6 Cisco Network TroubleshootingLab 7-1: Classification and Marking Lab 8-2: Implementing DHCP and Lab 8-1: Implementing FHRP for IPv4 andLab 7-2: Class Based Shaper DHCPv6 IPv6Lab 7-3: Class Based Policer Lab 8-3: Implementing NTP Lab 8-2: Implementing DHCP andLab 7-4: Congestion Avoidance and Lab 8-4: Implementing NAT DHCPv6Management Lab A-1: Establishing Basic Connectivity Lab 8-3: Implementing NTPCisco Network Troubleshooting for Catalyst Switch QoS Lab 8-4: Implementing NAT Lab 8-1: Implementing FHRP for IPv4 and Lab A-2: Exploring Catalyst 3560 Series Lab A-1: Establishing Basic ConnectivityIPv6 QoS Concepts for Catalyst Switch QoSLab 8-2: Implementing DHCP and DHCPv6 Lab A-3: Implementing VLAN-Based QoS Lab A-2: Exploring Catalyst 3560 SeriesLab 8-3: Implementing NTP QoS ConceptsLab 8-4: Implementing NAT Lab A-3: Implementing VLAN-Based QoS Lab A-1: Establishing Basic Connectivity for lineCatalyst Switch QoS Preparing for the Cisco CCIE Lab Exam Lab A-2: Exploring Catalyst 3560 Series Lab 2-1: CIERSASSESS-1 - 9 hour Lab lineQoS Concepts Analyzing the Cisco 360 CCIE R;S Preparing for the Cisco CCIE Lab Exam Lab A-3: Implementing VLAN-Based QoS Assessment Results Report Lab 2-1: CIERSASSESS-1 - 9 hour Lab

Resolving Layer 2 Tasks Analyzing the Cisco 360 CCIE R;SResolving IGP Tasks Assessment Results Report

line Resolving Redistribution Tasks Resolving Layer 2 TasksPreparing for the Cisco CCIE Lab Exam Resolving Advanced BGP Tasks Resolving IGP TasksLab 2-1: CIERSASSESS-1 - 9 hour Lab Lab 4-1: Establishing Basic Connectivity Resolving Redistribution Tasks Analyzing the Cisco 360 CCIE R;S for BGP Resolving Advanced BGP TasksAssessment Results Report Lab 4-2: Configuring BGP Lab 4-1: Establishing Basic ConnectivityResolving Layer 2 Tasks Lab 4-3: Filtering BGP Updates and Path for BGPResolving IGP Tasks Determination Lab 4-2: Configuring BGPResolving Redistribution Tasks Lab 5-1: Establishing Basic Connectivity Lab 4-3: Filtering BGP Updates and PathResolving Advanced BGP Tasks for MPLS Layer 3 VPNs Determination Lab 4-1: Establishing Basic Connectivity for Lab 5-2: Configuring the MPLS Core Lab 5-1: Establishing Basic ConnectivityBGP Lab 5-3: Creating VPNs and Enabling for MPLS Layer 3 VPNsLab 4-2: Configuring BGP VPN Routing Lab 5-2: Configuring the MPLS CoreLab 4-3: Filtering BGP Updates and Path Lab 5-4: Adding a Backup Link in VPNA Lab 5-3: Creating VPNs and Enabling VPNDetermination Lab 6-1: Establishing Basic Connectivity RoutingLab 5-1: Establishing Basic Connectivity for for Multicast Lab 5-4: Adding a Backup Link in VPNAMPLS Layer 3 VPNs Lab 6-2: Configuring Dense Mode IP Lab 6-1: Establishing Basic ConnectivityLab 5-2: Configuring the MPLS Core Multicast Routing for MulticastLab 5-3: Creating VPNs and Enabling VPN Resolving PIM Sparse Mode Multicast Lab 6-2: Configuring Dense Mode IPRouting Tasks Multicast RoutingLab 5-4: Adding a Backup Link in VPNA Lab 6-3: Configuring PIM Sparse Mode Resolving PIM Sparse Mode MulticastLab 6-1: Establishing Basic Connectivity for Using DiffServ Tools TasksMulticast Using Congestion Management and Lab 6-3: Configuring PIM Sparse ModeLab 6-2: Configuring Dense Mode IP Avoidance Tools Using DiffServ ToolsMulticast Routing Identifying Strategies for Router MQC Using Congestion Management andResolving PIM Sparse Mode Multicast QoS Tasks Avoidance ToolsTasks Lab 7-1: Classification and Marking Identifying Strategies for Router MQC QoSLab 6-3: Configuring PIM Sparse Mode Lab 7-2: Class Based Shaper TasksUsing DiffServ Tools Lab 7-3: Class Based Policer Lab 7-1: Classification and MarkingUsing Congestion Management and Lab 7-4: Congestion Avoidance and Lab 7-2: Class Based ShaperAvoidance Tools Management Lab 7-3: Class Based PolicerIdentifying Strategies for Router MQC QoS Cisco Network Troubleshooting Lab 7-4: Congestion Avoidance andTasks Lab 8-1: Implementing FHRP for IPv4 Management Lab 7-1: Classification and Marking and IPv6 Cisco Network TroubleshootingLab 7-2: Class Based Shaper Lab 8-2: Implementing DHCP and Lab 8-1: Implementing FHRP for IPv4 andLab 7-3: Class Based Policer DHCPv6 IPv6Lab 7-4: Congestion Avoidance and Lab 8-3: Implementing NTP Lab 8-2: Implementing DHCP andManagement Lab 8-4: Implementing NAT DHCPv6Cisco Network Troubleshooting Lab A-1: Establishing Basic Connectivity Lab 8-3: Implementing NTPLab 8-1: Implementing FHRP for IPv4 and for Catalyst Switch QoS Lab 8-4: Implementing NAT IPv6 Lab A-2: Exploring Catalyst 3560 Series Lab A-1: Establishing Basic ConnectivityLab 8-2: Implementing DHCP and DHCPv6 QoS Concepts for Catalyst Switch QoSLab 8-3: Implementing NTP Lab A-3: Implementing VLAN-Based QoS Lab A-2: Exploring Catalyst 3560 SeriesLab 8-4: Implementing NAT QoS ConceptsLab A-1: Establishing Basic Connectivity for Lab A-3: Implementing VLAN-Based QoS Catalyst Switch QoS lineLab A-2: Exploring Catalyst 3560 Series Preparing for the Cisco CCIE Lab Exam Cisco Network Troubleshooting


QoS Concepts Lab 2-1: CIERSASSESS-1 - 9 hour Lab lineLab A-3: Implementing VLAN-Based QoS Analyzing the Cisco 360 CCIE R;S Core and Advanced Tasks Analysis

Assessment Results ReportResolving Layer 2 Tasks

line Resolving IGP Tasks linePreparing for the Cisco CCIE Lab Exam Resolving Redistribution Tasks Preparing for the Cisco CCIE Lab Exam Lab 2-1: CIERSASSESS-1 - 9 hour Lab Resolving Advanced BGP Tasks Lab 2-1: CIERSASSESS-1 - 9 hour LabAnalyzing the Cisco 360 CCIE R;S Lab 4-1: Establishing Basic Connectivity Analyzing the Cisco 360 CCIE R;SAssessment Results Report for BGP Assessment Results ReportResolving Layer 2 Tasks Lab 4-2: Configuring BGP Resolving Layer 2 TasksResolving IGP Tasks Lab 4-3: Filtering BGP Updates and Path Resolving IGP TasksResolving Redistribution Tasks Determination Resolving Redistribution Tasks Resolving Advanced BGP Tasks Lab 5-1: Establishing Basic Connectivity Resolving Advanced BGP TasksLab 4-1: Establishing Basic Connectivity for for MPLS Layer 3 VPNs Lab 4-1: Establishing Basic ConnectivityBGP Lab 5-2: Configuring the MPLS Core for BGPLab 4-2: Configuring BGP Lab 5-3: Creating VPNs and Enabling Lab 4-2: Configuring BGPLab 4-3: Filtering BGP Updates and Path VPN Routing Lab 4-3: Filtering BGP Updates and PathDetermination Lab 5-4: Adding a Backup Link in VPNA Determination Lab 5-1: Establishing Basic Connectivity for Lab 6-1: Establishing Basic Connectivity Lab 5-1: Establishing Basic ConnectivityMPLS Layer 3 VPNs for Multicast for MPLS Layer 3 VPNsLab 5-2: Configuring the MPLS Core Lab 6-2: Configuring Dense Mode IP Lab 5-2: Configuring the MPLS CoreLab 5-3: Creating VPNs and Enabling VPN Multicast Routing Lab 5-3: Creating VPNs and Enabling VPNRouting Resolving PIM Sparse Mode Multicast RoutingLab 5-4: Adding a Backup Link in VPNA Tasks Lab 5-4: Adding a Backup Link in VPNALab 6-1: Establishing Basic Connectivity for Lab 6-3: Configuring PIM Sparse Mode Lab 6-1: Establishing Basic ConnectivityMulticast Using DiffServ Tools for MulticastLab 6-2: Configuring Dense Mode IP Using Congestion Management and Lab 6-2: Configuring Dense Mode IPMulticast Routing Avoidance Tools Multicast RoutingResolving PIM Sparse Mode Multicast Identifying Strategies for Router MQC Resolving PIM Sparse Mode MulticastTasks QoS Tasks TasksLab 6-3: Configuring PIM Sparse Mode Lab 7-1: Classification and Marking Lab 6-3: Configuring PIM Sparse ModeUsing DiffServ Tools Lab 7-2: Class Based Shaper Using DiffServ ToolsUsing Congestion Management and Lab 7-3: Class Based Policer Using Congestion Management andAvoidance Tools Lab 7-4: Congestion Avoidance and Avoidance ToolsIdentifying Strategies for Router MQC QoS Management Identifying Strategies for Router MQC QoSTasks Cisco Network Troubleshooting TasksLab 7-1: Classification and Marking Lab 8-1: Implementing FHRP for IPv4 Lab 7-1: Classification and MarkingLab 7-2: Class Based Shaper and IPv6 Lab 7-2: Class Based ShaperLab 7-3: Class Based Policer Lab 8-2: Implementing DHCP and Lab 7-3: Class Based PolicerLab 7-4: Congestion Avoidance and DHCPv6 Lab 7-4: Congestion Avoidance andManagement Lab 8-3: Implementing NTP Management Cisco Network Troubleshooting Lab 8-4: Implementing NAT Cisco Network TroubleshootingLab 8-1: Implementing FHRP for IPv4 and Lab A-1: Establishing Basic Connectivity Lab 8-1: Implementing FHRP for IPv4 andIPv6 for Catalyst Switch QoS IPv6Lab 8-2: Implementing DHCP and DHCPv6 Lab A-2: Exploring Catalyst 3560 Series Lab 8-2: Implementing DHCP andLab 8-3: Implementing NTP QoS Concepts DHCPv6Lab 8-4: Implementing NAT Lab A-3: Implementing VLAN-Based QoS Lab 8-3: Implementing NTPLab A-1: Establishing Basic Connectivity for Lab 8-4: Implementing NAT Catalyst Switch QoS Lab A-1: Establishing Basic ConnectivityLab A-2: Exploring Catalyst 3560 Series line for Catalyst Switch QoSQoS Concepts Preparing for the Cisco CCIE Lab Exam Lab A-2: Exploring Catalyst 3560 SeriesLab A-3: Implementing VLAN-Based QoS Lab 2-1: CIERSASSESS-1 - 9 hour Lab QoS Concepts

Analyzing the Cisco 360 CCIE R;S Lab A-3: Implementing VLAN-Based QoS BGP Task Analysis and Configuration Assessment Results Reportline Resolving Layer 2 Tasks Lab 9-1: CIERSASSESS-2 - 9 hour Lab

Reviewing Basic BGP Operations Resolving IGP Tasks lineResolving Redistribution Tasks Resolving Advanced BGP Tasks Appendix A: Cisco Catalyst Switch QoS Task

line Lab 4-1: Establishing Basic Connectivity Analysis and ConfigurationPreparing for the Cisco CCIE Lab Exam for BGP lineLab 2-1: CIERSASSESS-1 - 9 hour Lab Lab 4-2: Configuring BGP Ensuring QoS for the Catalyst 3560 SeriesAnalyzing the Cisco 360 CCIE R;S Lab 4-3: Filtering BGP Updates and Path SwitchAssessment Results Report Determination Resolving Layer 2 Tasks Lab 5-1: Establishing Basic ConnectivityResolving IGP Tasks for MPLS Layer 3 VPNs lineResolving Redistribution Tasks Lab 5-2: Configuring the MPLS Core Preparing for the Cisco CCIE Lab Exam


Resolving Advanced BGP Tasks Lab 5-3: Creating VPNs and Enabling Lab 2-1: CIERSASSESS-1 - 9 hour LabLab 4-1: Establishing Basic Connectivity for VPN Routing Analyzing the Cisco 360 CCIE R;SBGP Lab 5-4: Adding a Backup Link in VPNA Assessment Results ReportLab 4-2: Configuring BGP Lab 6-1: Establishing Basic Connectivity Resolving Layer 2 TasksLab 4-3: Filtering BGP Updates and Path for Multicast Resolving IGP TasksDetermination Lab 6-2: Configuring Dense Mode IP Resolving Redistribution Tasks Lab 5-1: Establishing Basic Connectivity for Multicast Routing Resolving Advanced BGP TasksMPLS Layer 3 VPNs Resolving PIM Sparse Mode Multicast Lab 4-1: Establishing Basic ConnectivityLab 5-2: Configuring the MPLS Core Tasks for BGPLab 5-3: Creating VPNs and Enabling VPN Lab 6-3: Configuring PIM Sparse Mode Lab 4-2: Configuring BGPRouting Using DiffServ Tools Lab 4-3: Filtering BGP Updates and PathLab 5-4: Adding a Backup Link in VPNA Using Congestion Management and Determination Lab 6-1: Establishing Basic Connectivity for Avoidance Tools Lab 5-1: Establishing Basic ConnectivityMulticast Identifying Strategies for Router MQC for MPLS Layer 3 VPNsLab 6-2: Configuring Dense Mode IP QoS Tasks Lab 5-2: Configuring the MPLS CoreMulticast Routing Lab 7-1: Classification and Marking Lab 5-3: Creating VPNs and Enabling VPNResolving PIM Sparse Mode Multicast Lab 7-2: Class Based Shaper RoutingTasks Lab 7-3: Class Based Policer Lab 5-4: Adding a Backup Link in VPNALab 6-3: Configuring PIM Sparse Mode Lab 7-4: Congestion Avoidance and Lab 6-1: Establishing Basic ConnectivityUsing DiffServ Tools Management for MulticastUsing Congestion Management and Cisco Network Troubleshooting Lab 6-2: Configuring Dense Mode IPAvoidance Tools Lab 8-1: Implementing FHRP for IPv4 Multicast RoutingIdentifying Strategies for Router MQC QoS and IPv6 Resolving PIM Sparse Mode MulticastTasks Lab 8-2: Implementing DHCP and TasksLab 7-1: Classification and Marking DHCPv6 Lab 6-3: Configuring PIM Sparse ModeLab 7-2: Class Based Shaper Lab 8-3: Implementing NTP Using DiffServ ToolsLab 7-3: Class Based Policer Lab 8-4: Implementing NAT Using Congestion Management andLab 7-4: Congestion Avoidance and Lab A-1: Establishing Basic Connectivity Avoidance ToolsManagement for Catalyst Switch QoS Identifying Strategies for Router MQC QoSCisco Network Troubleshooting Lab A-2: Exploring Catalyst 3560 Series TasksLab 8-1: Implementing FHRP for IPv4 and QoS Concepts Lab 7-1: Classification and MarkingIPv6 Lab A-3: Implementing VLAN-Based QoS Lab 7-2: Class Based ShaperLab 8-2: Implementing DHCP and DHCPv6 Lab 7-3: Class Based PolicerLab 8-3: Implementing NTP Router MQC QoS Task Analysis and Lab 7-4: Congestion Avoidance andLab 8-4: Implementing NAT Configuration Management Lab A-1: Establishing Basic Connectivity for line Cisco Network TroubleshootingCatalyst Switch QoS Reviewing MQC QoS and DiffServ Lab 8-1: Implementing FHRP for IPv4 andLab A-2: Exploring Catalyst 3560 Series IPv6QoS Concepts Lab 8-2: Implementing DHCP andLab A-3: Implementing VLAN-Based QoS line DHCPv6

Preparing for the Cisco CCIE Lab Exam Lab 8-3: Implementing NTPLab 2-1: CIERSASSESS-1 - 9 hour Lab Lab 8-4: Implementing NAT

line Analyzing the Cisco 360 CCIE R;S Lab A-1: Establishing Basic ConnectivityPreparing for the Cisco CCIE Lab Exam Assessment Results Report for Catalyst Switch QoSLab 2-1: CIERSASSESS-1 - 9 hour Lab Resolving Layer 2 Tasks Lab A-2: Exploring Catalyst 3560 SeriesAnalyzing the Cisco 360 CCIE R;S Resolving IGP Tasks QoS ConceptsAssessment Results Report Resolving Redistribution Tasks Lab A-3: Implementing VLAN-Based QoS Resolving Layer 2 Tasks Resolving Advanced BGP TasksResolving IGP Tasks Lab 4-1: Establishing Basic ConnectivityResolving Redistribution Tasks for BGP lineResolving Advanced BGP Tasks Lab 4-2: Configuring BGP Preparing for the Cisco CCIE Lab Exam Lab 4-1: Establishing Basic Connectivity for Lab 4-3: Filtering BGP Updates and Path Lab 2-1: CIERSASSESS-1 - 9 hour LabBGP Determination Analyzing the Cisco 360 CCIE R;SLab 4-2: Configuring BGP Lab 5-1: Establishing Basic Connectivity Assessment Results ReportLab 4-3: Filtering BGP Updates and Path for MPLS Layer 3 VPNs Resolving Layer 2 TasksDetermination Lab 5-2: Configuring the MPLS Core Resolving IGP TasksLab 5-1: Establishing Basic Connectivity for Lab 5-3: Creating VPNs and Enabling Resolving Redistribution Tasks MPLS Layer 3 VPNs VPN Routing Resolving Advanced BGP TasksLab 5-2: Configuring the MPLS Core Lab 5-4: Adding a Backup Link in VPNA Lab 4-1: Establishing Basic ConnectivityLab 5-3: Creating VPNs and Enabling VPN Lab 6-1: Establishing Basic Connectivity for BGPRouting for Multicast Lab 4-2: Configuring BGPLab 5-4: Adding a Backup Link in VPNA Lab 6-2: Configuring Dense Mode IP Lab 4-3: Filtering BGP Updates and PathLab 6-1: Establishing Basic Connectivity for Multicast Routing Determination Multicast Resolving PIM Sparse Mode Multicast Lab 5-1: Establishing Basic ConnectivityLab 6-2: Configuring Dense Mode IP Tasks for MPLS Layer 3 VPNsMulticast Routing Lab 6-3: Configuring PIM Sparse Mode Lab 5-2: Configuring the MPLS Core


Resolving PIM Sparse Mode Multicast Using DiffServ Tools Lab 5-3: Creating VPNs and Enabling VPNTasks Using Congestion Management and RoutingLab 6-3: Configuring PIM Sparse Mode Avoidance Tools Lab 5-4: Adding a Backup Link in VPNAUsing DiffServ Tools Identifying Strategies for Router MQC Lab 6-1: Establishing Basic ConnectivityUsing Congestion Management and QoS Tasks for MulticastAvoidance Tools Lab 7-1: Classification and Marking Lab 6-2: Configuring Dense Mode IPIdentifying Strategies for Router MQC QoS Lab 7-2: Class Based Shaper Multicast RoutingTasks Lab 7-3: Class Based Policer Resolving PIM Sparse Mode MulticastLab 7-1: Classification and Marking Lab 7-4: Congestion Avoidance and TasksLab 7-2: Class Based Shaper Management Lab 6-3: Configuring PIM Sparse ModeLab 7-3: Class Based Policer Cisco Network Troubleshooting Using DiffServ ToolsLab 7-4: Congestion Avoidance and Lab 8-1: Implementing FHRP for IPv4 Using Congestion Management andManagement and IPv6 Avoidance ToolsCisco Network Troubleshooting Lab 8-2: Implementing DHCP and Identifying Strategies for Router MQC QoSLab 8-1: Implementing FHRP for IPv4 and DHCPv6 TasksIPv6 Lab 8-3: Implementing NTP Lab 7-1: Classification and MarkingLab 8-2: Implementing DHCP and DHCPv6 Lab 8-4: Implementing NAT Lab 7-2: Class Based ShaperLab 8-3: Implementing NTP Lab A-1: Establishing Basic Connectivity Lab 7-3: Class Based PolicerLab 8-4: Implementing NAT for Catalyst Switch QoS Lab 7-4: Congestion Avoidance andLab A-1: Establishing Basic Connectivity for Lab A-2: Exploring Catalyst 3560 Series Management Catalyst Switch QoS QoS Concepts Cisco Network TroubleshootingLab A-2: Exploring Catalyst 3560 Series Lab A-3: Implementing VLAN-Based QoS Lab 8-1: Implementing FHRP for IPv4 andQoS Concepts IPv6Lab A-3: Implementing VLAN-Based QoS Lab 8-2: Implementing DHCP and

line DHCPv6Preparing for the Cisco CCIE Lab Exam Lab 8-3: Implementing NTP

line Lab 2-1: CIERSASSESS-1 - 9 hour Lab Lab 8-4: Implementing NAT Preparing for the Cisco CCIE Lab Exam Analyzing the Cisco 360 CCIE R;S Lab A-1: Establishing Basic ConnectivityLab 2-1: CIERSASSESS-1 - 9 hour Lab Assessment Results Report for Catalyst Switch QoSAnalyzing the Cisco 360 CCIE R;S Resolving Layer 2 Tasks Lab A-2: Exploring Catalyst 3560 SeriesAssessment Results Report Resolving IGP Tasks QoS ConceptsResolving Layer 2 Tasks Resolving Redistribution Tasks Lab A-3: Implementing VLAN-Based QoS Resolving IGP Tasks Resolving Advanced BGP TasksResolving Redistribution Tasks Lab 4-1: Establishing Basic ConnectivityResolving Advanced BGP Tasks for BGP lineLab 4-1: Establishing Basic Connectivity for Lab 4-2: Configuring BGP Preparing for the Cisco CCIE Lab Exam BGP Lab 4-3: Filtering BGP Updates and Path Lab 2-1: CIERSASSESS-1 - 9 hour LabLab 4-2: Configuring BGP Determination Analyzing the Cisco 360 CCIE R;SLab 4-3: Filtering BGP Updates and Path Lab 5-1: Establishing Basic Connectivity Assessment Results ReportDetermination for MPLS Layer 3 VPNs Resolving Layer 2 TasksLab 5-1: Establishing Basic Connectivity for Lab 5-2: Configuring the MPLS Core Resolving IGP TasksMPLS Layer 3 VPNs Lab 5-3: Creating VPNs and Enabling Resolving Redistribution Tasks Lab 5-2: Configuring the MPLS Core VPN Routing Resolving Advanced BGP TasksLab 5-3: Creating VPNs and Enabling VPN Lab 5-4: Adding a Backup Link in VPNA Lab 4-1: Establishing Basic ConnectivityRouting Lab 6-1: Establishing Basic Connectivity for BGPLab 5-4: Adding a Backup Link in VPNA for Multicast Lab 4-2: Configuring BGPLab 6-1: Establishing Basic Connectivity for Lab 6-2: Configuring Dense Mode IP Lab 4-3: Filtering BGP Updates and PathMulticast Multicast Routing Determination Lab 6-2: Configuring Dense Mode IP Resolving PIM Sparse Mode Multicast Lab 5-1: Establishing Basic ConnectivityMulticast Routing Tasks for MPLS Layer 3 VPNsResolving PIM Sparse Mode Multicast Lab 6-3: Configuring PIM Sparse Mode Lab 5-2: Configuring the MPLS CoreTasks Using DiffServ Tools Lab 5-3: Creating VPNs and Enabling VPNLab 6-3: Configuring PIM Sparse Mode Using Congestion Management and RoutingUsing DiffServ Tools Avoidance Tools Lab 5-4: Adding a Backup Link in VPNAUsing Congestion Management and Identifying Strategies for Router MQC Lab 6-1: Establishing Basic ConnectivityAvoidance Tools QoS Tasks for MulticastIdentifying Strategies for Router MQC QoS Lab 7-1: Classification and Marking Lab 6-2: Configuring Dense Mode IPTasks Lab 7-2: Class Based Shaper Multicast RoutingLab 7-1: Classification and Marking Lab 7-3: Class Based Policer Resolving PIM Sparse Mode MulticastLab 7-2: Class Based Shaper Lab 7-4: Congestion Avoidance and TasksLab 7-3: Class Based Policer Management Lab 6-3: Configuring PIM Sparse ModeLab 7-4: Congestion Avoidance and Cisco Network Troubleshooting Using DiffServ ToolsManagement Lab 8-1: Implementing FHRP for IPv4 Using Congestion Management andCisco Network Troubleshooting and IPv6 Avoidance ToolsLab 8-1: Implementing FHRP for IPv4 and Lab 8-2: Implementing DHCP and Identifying Strategies for Router MQC QoSIPv6 DHCPv6 Tasks


Lab 8-2: Implementing DHCP and DHCPv6 Lab 8-3: Implementing NTP Lab 7-1: Classification and MarkingLab 8-3: Implementing NTP Lab 8-4: Implementing NAT Lab 7-2: Class Based ShaperLab 8-4: Implementing NAT Lab A-1: Establishing Basic Connectivity Lab 7-3: Class Based PolicerLab A-1: Establishing Basic Connectivity for for Catalyst Switch QoS Lab 7-4: Congestion Avoidance andCatalyst Switch QoS Lab A-2: Exploring Catalyst 3560 Series Management Lab A-2: Exploring Catalyst 3560 Series QoS Concepts Cisco Network TroubleshootingQoS Concepts Lab A-3: Implementing VLAN-Based QoS Lab 8-1: Implementing FHRP for IPv4 andLab A-3: Implementing VLAN-Based QoS IPv6

Lab 8-2: Implementing DHCP andline DHCPv6

line Preparing for the Cisco CCIE Lab Exam Lab 8-3: Implementing NTPPreparing for the Cisco CCIE Lab Exam Lab 2-1: CIERSASSESS-1 - 9 hour Lab Lab 8-4: Implementing NAT Lab 2-1: CIERSASSESS-1 - 9 hour Lab Analyzing the Cisco 360 CCIE R;S Lab A-1: Establishing Basic ConnectivityAnalyzing the Cisco 360 CCIE R;S Assessment Results Report for Catalyst Switch QoSAssessment Results Report Resolving Layer 2 Tasks Lab A-2: Exploring Catalyst 3560 SeriesResolving Layer 2 Tasks Resolving IGP Tasks QoS ConceptsResolving IGP Tasks Resolving Redistribution Tasks Lab A-3: Implementing VLAN-Based QoS Resolving Redistribution Tasks Resolving Advanced BGP TasksResolving Advanced BGP Tasks Lab 4-1: Establishing Basic Connectivity Appendix B: Strengthening IPv4 Skills byLab 4-1: Establishing Basic Connectivity for for BGP Learning IPv6BGP Lab 4-2: Configuring BGP lineLab 4-2: Configuring BGP Lab 4-3: Filtering BGP Updates and PathLab 4-3: Filtering BGP Updates and Path Determination Determination Lab 5-1: Establishing Basic ConnectivityLab 5-1: Establishing Basic Connectivity for for MPLS Layer 3 VPNsMPLS Layer 3 VPNs Lab 5-2: Configuring the MPLS CoreLab 5-2: Configuring the MPLS Core Lab 5-3: Creating VPNs and EnablingLab 5-3: Creating VPNs and Enabling VPN VPN RoutingRouting Lab 5-4: Adding a Backup Link in VPNALab 5-4: Adding a Backup Link in VPNA Lab 6-1: Establishing Basic ConnectivityLab 6-1: Establishing Basic Connectivity for for MulticastMulticast Lab 6-2: Configuring Dense Mode IPLab 6-2: Configuring Dense Mode IP Multicast RoutingMulticast Routing Resolving PIM Sparse Mode MulticastResolving PIM Sparse Mode Multicast TasksTasks Lab 6-3: Configuring PIM Sparse ModeLab 6-3: Configuring PIM Sparse Mode Using DiffServ ToolsUsing DiffServ Tools Using Congestion Management andUsing Congestion Management and Avoidance ToolsAvoidance Tools Identifying Strategies for Router MQCIdentifying Strategies for Router MQC QoS QoS TasksTasks Lab 7-1: Classification and MarkingLab 7-1: Classification and Marking Lab 7-2: Class Based ShaperLab 7-2: Class Based Shaper Lab 7-3: Class Based PolicerLab 7-3: Class Based Policer Lab 7-4: Congestion Avoidance andLab 7-4: Congestion Avoidance and Management Management Cisco Network TroubleshootingCisco Network Troubleshooting Lab 8-1: Implementing FHRP for IPv4Lab 8-1: Implementing FHRP for IPv4 and and IPv6IPv6 Lab 8-2: Implementing DHCP andLab 8-2: Implementing DHCP and DHCPv6 DHCPv6Lab 8-3: Implementing NTP Lab 8-3: Implementing NTPLab 8-4: Implementing NAT Lab 8-4: Implementing NAT Lab A-1: Establishing Basic Connectivity for Lab A-1: Establishing Basic ConnectivityCatalyst Switch QoS for Catalyst Switch QoSLab A-2: Exploring Catalyst 3560 Series Lab A-2: Exploring Catalyst 3560 SeriesQoS Concepts QoS ConceptsLab A-3: Implementing VLAN-Based QoS Lab A-3: Implementing VLAN-Based QoS

MPLS Layer 3 VPNsline line

Reviewing Basic MPLS VPN Operations Preparing for the Cisco CCIE Lab Exam Lab 2-1: CIERSASSESS-1 - 9 hour LabAnalyzing the Cisco 360 CCIE R;S

line Assessment Results ReportPreparing for the Cisco CCIE Lab Exam Resolving Layer 2 Tasks


Lab 2-1: CIERSASSESS-1 - 9 hour Lab Resolving IGP TasksAnalyzing the Cisco 360 CCIE R;S Resolving Redistribution Tasks Assessment Results Report Resolving Advanced BGP TasksResolving Layer 2 Tasks Lab 4-1: Establishing Basic ConnectivityResolving IGP Tasks for BGPResolving Redistribution Tasks Lab 4-2: Configuring BGPResolving Advanced BGP Tasks Lab 4-3: Filtering BGP Updates and PathLab 4-1: Establishing Basic Connectivity for Determination BGP Lab 5-1: Establishing Basic ConnectivityLab 4-2: Configuring BGP for MPLS Layer 3 VPNsLab 4-3: Filtering BGP Updates and Path Lab 5-2: Configuring the MPLS CoreDetermination Lab 5-3: Creating VPNs and EnablingLab 5-1: Establishing Basic Connectivity for VPN RoutingMPLS Layer 3 VPNs Lab 5-4: Adding a Backup Link in VPNALab 5-2: Configuring the MPLS Core Lab 6-1: Establishing Basic ConnectivityLab 5-3: Creating VPNs and Enabling VPN for MulticastRouting Lab 6-2: Configuring Dense Mode IPLab 5-4: Adding a Backup Link in VPNA Multicast RoutingLab 6-1: Establishing Basic Connectivity for Resolving PIM Sparse Mode MulticastMulticast TasksLab 6-2: Configuring Dense Mode IP Lab 6-3: Configuring PIM Sparse ModeMulticast Routing Using DiffServ ToolsResolving PIM Sparse Mode Multicast Using Congestion Management andTasks Avoidance ToolsLab 6-3: Configuring PIM Sparse Mode Identifying Strategies for Router MQCUsing DiffServ Tools QoS TasksUsing Congestion Management and Lab 7-1: Classification and MarkingAvoidance Tools Lab 7-2: Class Based ShaperIdentifying Strategies for Router MQC QoS Lab 7-3: Class Based PolicerTasks Lab 7-4: Congestion Avoidance andLab 7-1: Classification and Marking Management Lab 7-2: Class Based Shaper Cisco Network TroubleshootingLab 7-3: Class Based Policer Lab 8-1: Implementing FHRP for IPv4Lab 7-4: Congestion Avoidance and and IPv6Management Lab 8-2: Implementing DHCP andCisco Network Troubleshooting DHCPv6Lab 8-1: Implementing FHRP for IPv4 and Lab 8-3: Implementing NTPIPv6 Lab 8-4: Implementing NAT Lab 8-2: Implementing DHCP and DHCPv6 Lab A-1: Establishing Basic ConnectivityLab 8-3: Implementing NTP for Catalyst Switch QoSLab 8-4: Implementing NAT Lab A-2: Exploring Catalyst 3560 SeriesLab A-1: Establishing Basic Connectivity for QoS ConceptsCatalyst Switch QoS Lab A-3: Implementing VLAN-Based QoSLab A-2: Exploring Catalyst 3560 SeriesQoS ConceptsLab A-3: Implementing VLAN-Based QoS line

Preparing for the Cisco CCIE Lab Exam Lab 2-1: CIERSASSESS-1 - 9 hour LabAnalyzing the Cisco 360 CCIE R;SAssessment Results ReportResolving Layer 2 TasksResolving IGP TasksResolving Redistribution Tasks Resolving Advanced BGP TasksLab 4-1: Establishing Basic Connectivityfor BGPLab 4-2: Configuring BGPLab 4-3: Filtering BGP Updates and PathDetermination Lab 5-1: Establishing Basic Connectivityfor MPLS Layer 3 VPNsLab 5-2: Configuring the MPLS CoreLab 5-3: Creating VPNs and EnablingVPN RoutingLab 5-4: Adding a Backup Link in VPNALab 6-1: Establishing Basic Connectivity


for MulticastLab 6-2: Configuring Dense Mode IPMulticast RoutingResolving PIM Sparse Mode MulticastTasksLab 6-3: Configuring PIM Sparse ModeUsing DiffServ ToolsUsing Congestion Management andAvoidance ToolsIdentifying Strategies for Router MQCQoS TasksLab 7-1: Classification and MarkingLab 7-2: Class Based ShaperLab 7-3: Class Based PolicerLab 7-4: Congestion Avoidance andManagement Cisco Network TroubleshootingLab 8-1: Implementing FHRP for IPv4and IPv6Lab 8-2: Implementing DHCP andDHCPv6Lab 8-3: Implementing NTPLab 8-4: Implementing NAT Lab A-1: Establishing Basic Connectivityfor Catalyst Switch QoSLab A-2: Exploring Catalyst 3560 SeriesQoS ConceptsLab A-3: Implementing VLAN-Based QoS

linePreparing for the Cisco CCIE Lab Exam Lab 2-1: CIERSASSESS-1 - 9 hour LabAnalyzing the Cisco 360 CCIE R;SAssessment Results ReportResolving Layer 2 TasksResolving IGP TasksResolving Redistribution Tasks Resolving Advanced BGP TasksLab 4-1: Establishing Basic Connectivityfor BGPLab 4-2: Configuring BGPLab 4-3: Filtering BGP Updates and PathDetermination Lab 5-1: Establishing Basic Connectivityfor MPLS Layer 3 VPNsLab 5-2: Configuring the MPLS CoreLab 5-3: Creating VPNs and EnablingVPN RoutingLab 5-4: Adding a Backup Link in VPNALab 6-1: Establishing Basic Connectivityfor MulticastLab 6-2: Configuring Dense Mode IPMulticast RoutingResolving PIM Sparse Mode MulticastTasksLab 6-3: Configuring PIM Sparse ModeUsing DiffServ ToolsUsing Congestion Management andAvoidance ToolsIdentifying Strategies for Router MQCQoS TasksLab 7-1: Classification and MarkingLab 7-2: Class Based ShaperLab 7-3: Class Based PolicerLab 7-4: Congestion Avoidance and


Management Cisco Network TroubleshootingLab 8-1: Implementing FHRP for IPv4and IPv6Lab 8-2: Implementing DHCP andDHCPv6Lab 8-3: Implementing NTPLab 8-4: Implementing NAT Lab A-1: Establishing Basic Connectivityfor Catalyst Switch QoSLab A-2: Exploring Catalyst 3560 SeriesQoS ConceptsLab A-3: Implementing VLAN-Based QoS

linePreparing for the Cisco CCIE Lab Exam Lab 2-1: CIERSASSESS-1 - 9 hour LabAnalyzing the Cisco 360 CCIE R;SAssessment Results ReportResolving Layer 2 TasksResolving IGP TasksResolving Redistribution Tasks Resolving Advanced BGP TasksLab 4-1: Establishing Basic Connectivityfor BGPLab 4-2: Configuring BGPLab 4-3: Filtering BGP Updates and PathDetermination Lab 5-1: Establishing Basic Connectivityfor MPLS Layer 3 VPNsLab 5-2: Configuring the MPLS CoreLab 5-3: Creating VPNs and EnablingVPN RoutingLab 5-4: Adding a Backup Link in VPNALab 6-1: Establishing Basic Connectivityfor MulticastLab 6-2: Configuring Dense Mode IPMulticast RoutingResolving PIM Sparse Mode MulticastTasksLab 6-3: Configuring PIM Sparse ModeUsing DiffServ ToolsUsing Congestion Management andAvoidance ToolsIdentifying Strategies for Router MQCQoS TasksLab 7-1: Classification and MarkingLab 7-2: Class Based ShaperLab 7-3: Class Based PolicerLab 7-4: Congestion Avoidance andManagement Cisco Network TroubleshootingLab 8-1: Implementing FHRP for IPv4and IPv6Lab 8-2: Implementing DHCP andDHCPv6Lab 8-3: Implementing NTPLab 8-4: Implementing NAT Lab A-1: Establishing Basic Connectivityfor Catalyst Switch QoSLab A-2: Exploring Catalyst 3560 SeriesQoS ConceptsLab A-3: Implementing VLAN-Based QoS


Más información:

Para más información o para reservar tu plaza llámanos al (34) 91 425 06 60

[email protected]

www.globalknowledge.es

Global Knowledge Network Spain, C/ Retama 7, 6ª planta, 28045 Madrid

http://www.globalknowledge.es

Documents

CCIE 360 R&S Advanced Workshop 1store.globalknowledge.net/course-overviews/ES/CIERS1_CO_.pdf · Cisco Network Troubleshooting QoS Concepts DHCPv6 Lab 8-1: Implementing FHRP for IPv4