Catalog ROMUS 2012 - Bariere de Praf

7/30/2019 Catalog ROMUS 2012 - Bariere de Praf

1/20

Entrance Mattings

Accessibility

Profiles

Flooring Installation and

Specialist Tools

2012


2/20

93505 93510 301908 301906

5992

Making your business easier

Easy tocontact! Easy to place an order

Easy to display and stock !

Easy to promote and specify !

TOOLS DISPLAY LOCKED DISPLAY CABINET LONG PROFILE

DISPLAY

SHORT PROFILES

DISPLAY

TECHNICAL DATASHEET(available on request for allProfiles and entrance mats)POSTER WITH PROFILES SAMPLES ORDER PROCESS

[email protected]

Office : + 33 169 79 69 77

www.romus.org

+ 33 169 79 32 00


3/201

For over forty years, ROMUS has been inventing, designing andmanufacturing ranges of profiles, accessories and tools for flooringand painting contractors in over sixty countries.

ROMUS new 2012 catalogue is more proof of our determinationto be the trades top flooring and wall covering supplier. Once againROMUS is ahead of the pack, with innovative solutions for preparing,installing and finishing walls and floors.

ROMUS cares about protecting the environment, day in, dayout. Were committed to sustainable development starting with ourmailouts to partners and customers. This catalogue, describing ourrange and all our new products, is printed on FSC-certified recycledpaper using vegetable-based inks. We keep sustainability in mind in allour product development, too.

Weve checked our range for total compliance with the REACHstandards; and weve set up a staff training programme to boost

environmental awareness. Now, as well as recycling, waste handling,and energy saving, our office is going green: paper-free handling ofour customers orders. Therell be more such good citizen initiatives in2012.

HQ, manufacturing and logistic (Champlan - Paris area - France)

Catalogue available in

18 languages

CorporateCorporate


4/202

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

............................................................................................................................................................................................................

Personal


5/203

p.4

p.13

p.16

p.19

Entry Clean mats ................................................................................................................................Matwell frames ...................................................................................................................................Chairmats .............................................................................................................................................Warning systems ...............................................................................................................................

p.32

p.34

p.35

p.36

p.38

p.40

Rounded coverstrips ........................................................................................................................Invisix coverstrips............................................................................................................................Reducer proles .................................................................................................................................Edges - Reducers ...............................................................................................................................Miscellaneous Proles .....................................................................................................................Coverstrips for laminate and parquet ........................................................................................

p.46p.58

p.58

p.59

p.63

p.75

Stair-Nosings .......................................................................................................................................Stair rods ..............................................................................................................................................Carpet stretching ..............................................................................................................................Expansion Proles .............................................................................................................................Wall protection - Wall nishing ....................................................................................................Prole Accessories .............................................................................................................................

p.78

p.86

p.89

p.90

p.95

p.101

p.103

p.104

p.105

p.109

p.111

Floor Stripping....................................................................................................................................Wall Stripping .....................................................................................................................................Facade Treatment ..............................................................................................................................Mixing - Screeding ............................................................................................................................Sanding and Finishing .....................................................................................................................Fine Dust Vacuum Cleaners ..........................................................................................................Moisture Treatment ..........................................................................................................................Heating..................................................................................................................................................Moisture Control Measurement ...................................................................................................Plasterboard Installation .................................................................................................................E.T.I. Tools ..............................................................................................................................................

p.118

p.119

p.120

Blades for Knives ................................................................................................................................Cutter Blades .......................................................................................................................................Scraper Blades ....................................................................................................................................

p.122

p.130

p.136

p.138p.139

p.144

p.146

p.149

p.151

p.153

Cutting ..................................................................................................................................................Measuring - Scribing - Lining ........................................................................................................Special Painter Tools .........................................................................................................................

Stapling .................................................................................................................................................Adhesives - Tape and Tools ............................................................................................................Smooting - Pressing .........................................................................................................................Handling - Transport ........................................................................................................................Personal Protection Equipment ...................................................................................................Floor Cleaning ....................................................................................................................................Power Tools ..........................................................................................................................................

p.158

p.165

p.166

p.176

p.177

Laminate and Parquet Installation ..............................................................................................Cold Welding of PVC Flooring .......................................................................................................Hot Welding of PVC / Linoleum Flooring ..................................................................................Linoleum Tools - PVC cutting tools .............................................................................................Carpet stretching tools ...................................................................................................................

Entrance Matting - Accessibility

Coverstrips

Finishing Proles

Suboor Preparation

Blades

General Installation tools

Special Flooring Tools

This logo means that the product can be hung up on tools or proles display shelves.All items are identied with their reference, designation and barcode.

Flooring Installation

and Specialist Tools

Entrance MattingsAccessibility

Profiles

Summary


6/204

Entrance matting Entry clean mats

Replace your oldfoot wiper!

Complies withACCESSIBILITY

Standard n DGU HC2007/53 for disable.

BEFORE

AFTER

ENTRY CLEAN ENTRANCE MATS

- HYGIENIC:

As retained dust does not penetrate deeply as in the case of a brushmat, these mats make regular maintenance easy.

- DESIGN:They fit the entrance halls decoration perfectly.

- PROTECT ENTRANCE HALL FLOORINGS:They stop dust (which can otherwise abrade floor tiles, parquet flooringand carpets), as well as wet brought in from outside on shoes.

- HARDWEARING AND RIGID:Perfectly suited to areas of heavy traffic, or wheelchair traffic.

- LONG LIFE:The mat soon pays for itself, especially when properly maintained.

ENTRY CLEAN and ROMUS entrance mats (which can be combined) were designed with one single aim: to stop dust and wet brought in on visitorsshoes, and prevent soiling and premature wear of indoor flooring.

1- TRAFFIC VOLUME: frequent (500 people passing per day) or heavy traffic (more than 500 people / day),

2- LOCATION: indoors or outdoors (covered),

3- PURPOSE: all or most of the wet from footwear, outdoor mess off footwear,

damp and residues (dirt, gravel) off footwear.

with a sealed frame or a frame that can be inset, surrounded by a reducer.

5- THICKNESS: Three thicknesses available, to suit practically any situation:

6- STRUCTURE: designed for heavy loads and traffic. Mats are supplied in 50 - 60 cm wide segments.dust passes through the holes (at junctions) in the mat.Easy maintenance: just roll up the mat and vacuum the dust collected in the well.

7- MANUFACTURING LEAD TIME.

HOW TO CHOOSE YOUR ENTRANCE MAT ?

FOR ORDERING ENTRANCE MATTINGPlease use the Order/Quotation Form on page 14, followingthe instructions and details given there.

MAT PAGE THICKNESS TRAFFIC LOCATION PURPOSE STRUCTURE

Romat GT 6

12-17-22 mm

HEAVY TRAFFIC INDOORSSCRAPES, ABSORBS

ROLLS UP / OPEN

Romat STD7 FREQUENT INDOORS / OUTDOORS

Romat fluted SCRAPES

Design carpet

812 - 22 mm

HEAVY TRAFFIC INDOORS SCRAPES

Design rubber FREQUENT INDOORS / OUTDOORS SCRAPESDesign brush 15 - 25 mm SCRAPES

Reversible superior

912 - 18 mm

HEAVY TRAFFIC

INDOORS SCRAPES ABSORBS

RIGID / CLOSED

Reversible fluted INDOORS / OUTDOORS SCRAPES

Reversible pro-active 18 mm

INDOORS SCRAPES ABSORBSRobust

1023 mm

FREQUENTRobust junior 12 mm

Forma11 11 - 16 mm OPEN - CLOSED

PriorINDOORS / OUTDOORS

SCRAPES

Brush 10 22 mm HEAVY TRAFFIC SCRAPES ROLLS UP - OPEN


7/205

Entrance mattingAccessibility

About Entry Clean p.4

ENTRANCE MATTING

ACCESSIBILITY

Entry Clean mats p.6

Matwell frames p.13

Order form p.14

Chairmats p.15

Warning systems p.19

Washable entrance mats p.17

Safety oors and access p.21

Window and decorative lms p.28


8/206

12

34 344 6 4 6 34

17

34 344 6 4 6 34

17

22

34 344 6 4 6 34

22

Entrance matting

Entry clean mats

Heavytraffic

Cablesfixing >> CONSTRUCTION:

ROMAT GT mat was designed for indoor or covered outdoor surfaces and for heavy foottraffic. It is made of heavy duty polypropylene dust barrier carpet strips inserted in rawaluminium profiles sections.These sections are linked together with a galvanized steel cable and fixed with zinc platedscrews and bolts. Rubber spacers ensure 4 to 6 mm between each section. Traffic noise isdeadened by anti-slip rubber strips stuck under each aluminium section.

>> MAINTENANCE:Dirt passes between the profiles and falls into the matwell. The mat can easily be rolled up forregular vacuuming, over the mat or underneath.

PURPOSE: SCRAPES -ABSORBS MOISTURE

ROLLS UPMADE TO MEASURE

Profiles linked together with a cable

ROMAT GT - 12 mm

ROMAT GT - 17 mm

ROMAT GT - 22 mm

Carrera Blue

Anthracite loop pile

Rubber

3 Inserts

CARRERA

Anthracite

Blue

Brown

Red

LOOP PILE

Anthracite

Grey

Blue Grey

Sisal shade

Red

FLUTED RUBBER

Black

LOOP PILE

Anthracite

Grey

Blue Grey

Sisal shade

Red

FLUTED RUBBER

Black

LOOP PILE

Anthracite

Grey

Blue Grey

Sisal shade

Red

FLUTED RUBBER

Black

LOOP PILE100% polypropylene needle felt.Available on 12 - 17 - 22 mmROMAT mats Scrapes / Absorbs- Indoors

CARRERATufted polyamideAvailable only on12 mm ROMAT mat Scrapes /Absorbs - Indoors

FLUTED RUBBERAvailable on 12 - 17 - 22 mmROMAT mats Black Scrapes -Indoors / Outdoors

Anthracite Blue

Brown Red

Anthracite Grey

Blue grey Sisal shade

Red

Attractive


9/207


Rolls up Shortmanufacturing

lead time

>> CONSTRUCTION:ROMAT matting is made of heavy duty rubber dust barrier textilestrips, inserted in raw aluminium profiles sections.These sections are linked together with semi-rigid PVC stripsunderneath,deadening traffic noise and allowing rolling up of the mat.

>> MAINTENANCE:Dirt passes between the profiles and falls into the mat well.The mat can easily be rolled up for vacuuming.

TRAFFIC: FREQUENT ROLLS UPMADE TO MEASURE Open structure Rolls up

ROMAT 12 mm

ROMAT 17 mm

ROMAT 22 mm

Loop pile

Flutedrubber

Blue GreyLoop Pile

Flutedrubber

Anthraciteloop pile

Flutedrubber

AnthraciteCarrera

CARRERA

Anthracite

BlueBrown

Red

LOOP PILE

AnthraciteGreyBlue grey

Sisal shadeRed

FLUTED RUBBER

Black

FLUTED RUBBERBlack

LOOP PILEAnthracite

Grey

Blue greySisal shade

Red

FLUTED RUBBER

Black

LOOP PILE

Anthracite

Grey

Blue grey

Sisal shade

Red

3 Inserts

Attractive

LOOP PILE100% polypropylene needle felt.Available on 12 - 17 - 22 mmROMAT mats Scrapes / Absorbs- Indoors

CARRERATufted polyamideAvailable only on 12 mmROMAT mat Scrapes / Absorbs- Indoors

FLUTED RUBBERAvailable on 12 - 17 - 22 mmROMAT mats Black Scrapes -Indoors / Outdoors

Anthracite Blue

Brown Red

Anthracite Grey

Sisal shade

Red

Blue grey


10/208

40 4

12

22,2

1

30

22

4

3019 4

22

1

2

3


>> CONSTRUCTION:DESIGN matting is made of heavy duty dust barriertextile strips, inserted in raw aluminium profiles sections.These sections are linked together with soft PVC strips.The rubber strips laid under the profiles also deadentraffic noise.

>> MAINTENANCE:Dirt passes between the profiles and falls into the mat well.The mat can easily be rolled up for vacuuming.

BRUSHPURPOSE: SCRAPESLOCATION: INDOORS/ OUTDOORS

POLYAMID TUFTED CARPETPURPOSE: SCRAPES - ABSORBSLOCATION: INDOORSFLECKED ABSORBES UP TO 6.5 L / m2

RUBBERPURPOSE: SCRAPES - ANTI-SLIPLOCATION: INDOORS / OUTDOORS

3 inserts

TRAFFIC: Frequent ROLLS UPMADE TO MEASURE

DESIGN

DESIGN JUNIOR

Fire rating:CFL - S1

Carpet

Rubber

Brush

Combined

Carpet

Rubber

Brush

Carpet + Brush insert

Combined

Grey/Brown Grey/Blue Grey/Red

AnthraciteGrey/Light grey

Other colours availableon request

Anthracite

Grey

Black

Black

Grey

Specify composition(e.g. 1 grey carpet insert1 black rubber insert)

AnthraciteOther colours on request

Other colours availableon request

Anthracite

Grey / Light grey

Black

Black

Grey

Specify composition

(e.g. 2 anthracite carpetinserts 1 black brush insert)


11/209

15

18

15

12

15 15

1530

18

30

12

15

15

18

15

12

15 15

12

30 15

30

18

15


Heavy traffic Fire rating:BFL - S1

>> CONSTRUCTION:REVERSIBLE matting is made of inserts fitted betweentwo raw aluminium profiles. The whole matting is assembledwith galvanized steel rods.

>> MAINTENANCE:Dirt from shoes is removed by the profile edges and falls between the absorbentinserts, allowing thus easy cleaning by vacuuming.Being reversible, these mats can also be turned regularly.

SUPERIOR INSERT

FLUTED INSERT

Single Grey18 mm

Double Black18 mm

Single Black12 mm

Double

Grey

Single18 mm

Double18 mm

3 INSERTS SUPERIOR FLUTED

PURPOSE

(damp from shoes)SCRAPES

LOCATION OUTDOORS / INDOORS

TRAFFIC including wheelchairs and trolleys

STRUCTURE CLOSED - Dirt withheld on profiles

INSERTRUBBER, buffed polyamide fibres

(grey-brown carpet effect)Fluted RUBBER

CUT MADE TO MEASURE

Single

Double

Single

Double

Grey

Black

Grey

Black

Grey

Black

Grey

Black

Black

Black

Black

Black


12/2010

24

23

15

78 13

23

38,6

12

15 4

15

22

Entrance matting

Shortmanufacturing

lead time

Entry clean mats

>> CONSTRUCTION:ROBUST and ROBUST JUNIOR entrance matting is made of mill aluminium profiles fittedinto each other, with glued-on dust barrier inserts.These profiles form 50 cm wide plates (walking direction), put side by side in the hollow, easyto remove for maintenance.

>> MAINTENANCE:ROBUST and ROBUST JUNIOR entrance matting needs to be cleaned regularly with avaccum cleaner. In heavy duty use, cleaning is also possible with a high pressure water-spray plate by plate.

Dust barriercarpet inserts,

scrap and absorb

LOCATION: INDOORSTRAFFIC: FREQUENTNONSLIP / EXTREMELY STABLESTRUCTURE ALU CLOSEDMADE TO MEASURE

ROBUST 23 mm

ROBUST JUNIOR 12 mm

BRUSH

Wide

Single

Single

Anthracite

Anthracite

Anthracite

>> CONSTRUCTION:BRUSH mats are made of 15 x 15 mm plastic profiles sections withbrush inserts made of High quality UV resistant 6.6 nylon fibres).The sections are linked together with flexible stainless steel cables.

>> MAINTENANCE:Dirt passes between the profiles and falls into the matwell.The mat can easily be rolled up for vacuuming.

Traffic: Heavy Traffic

Quote on request

BRUSHLOGO

PLAIN COLOURS

Black 9005

Dark grey 7043

Light grey 7040

Brown 8017

Yellow 1006

Beige 1002

Dark green 6005

Green 6029

Mint green 6027

Blue 5022

Dark red 3003

Red 3020

Orange

Combined colours toprecise


13/2011

Entrance matting

Entry clean mats

>> CONSTRUCTION:System of clicking tiles offering high flexibility of use and easy set-up.They can be installed indoors as a free-standing floor covering or in a recess.FORMA: PVC tiles with 100% polyamide textile strips, (scraping and absorbing)6.6 mono and multifilamentsPRIOR: UV resistant PVC tiles, graphite colour.Available thicknesses: 11 and 16 mm.

>> MAINTENANCE:Vacuum daily.FORMA: Clean regularly by injection/extraction process.PRIOR: Clean regularly by injection/extraction process or using a high pressurewater spray outdoors.

Easy cutClick System

Textilecolourrange

AnthraciteGrey Blue Brown

FORMA TILES

PRIOR TILES

Th. 16 mmOpen bottomIndoors

Th. 11 mmClosed bottomIndoors

Th. 16 mmOpen bottomIndoors / Outdoors

Th. 11 mmClosed bottomIndoors / Outdoors

(covered)

As grating oras edge offorma tiles

You need 5 tilesto do 1 m2

EXAMPLE:For a matwell of 1.80 m x 1.20 m, that is 2.16 m2,one tile being 0.228 m2, you will need2.16 / 0.228 = 9.5 tiles, that is 10 tiles to order.

COLOURSTh 16 mm Open

bottomPrice / tile

Th 11 mm Closedbottom

Price / tile

Anthracite

Grey

Blue

Brown

COLOURTh. 16 mm Open

bottomPrice / tile

Th. 11 mmClosed bottom

Price / tilePVC

Graphite


14/2012

10


THICKNESS 12.5 - Standardized

THICKNESS 23 mm - Classic THICKNESS 11 mm - Classic

Connector (per 10)

Small holes of 14 mm, respecting

standards on public entrances.Specially designed surface for trolleys,wheelchairs, crutches, white sticks...

Holes diam.14 mm

classic

Disabledstandards

>> CONSTRUCTION:ROMUSTEP is made from the radial structure of recycled lorry, bus and aircraft tyres.This consists of rubber reinforced by nylon fibres, surface-scraped to show a synthetic down.

ROMUSTEP underneath is a glass fibre canvas layer, which helps it stick perfectly whenglued. Weight: 9 kg / m2.

>> MAINTENANCE:In heavy traffic areas, ROMUSTEP must be cleaned daily with a vacuum cleaner or hardbrush. It may also be shampoo- cleaned by injection/extraction process.

PURPOSE: SCRAPES/ABSORBSLOCATION: INDOORS ANTI-SLIP/ROT-PROOF

ROMUSTEP TILES

Green productrecycledrubber

Tiles 30.5 x 30.5 cm

Tiles to be stuck- quick and easy

solutionUseapolyureth

aneadhesive

Tile 10Dimensions:30.5 x 30.5 cm.


15/2013

23

17

6

6

15

13

6

47

20

60

1512

Entrance matting Matwell frames

Metal profiles to be set into the floor. The single 17/23model can be laid either way up, providing a frame for17 mm or 23 mm thick brush mats.

Matwell profiles, cut to measure but unassembled, can berapidly supplied. This allows installation to go ahead whilewaiting for delivery of the entrance mat.

*Service available only whenalso ordering ROMUS mats

Supplied without angleconnector and without

fixing feet.

To be set intothe concretefloor. Pack of 8.

To make the frame.Pack of 4.

Especially suited when theres no recess. Ensures anattractive secured finish. To be mounted on perfectly flatsurfaces.

Matwell frame isassembled withCorner angles.

Alu silverLength: 3.00 m.

Alu silverLength: 4.00 m.

MATWELL FRAME 17 or 23 mm

MATWELL FRAME 13 mm

BEVELLED ACCESS PROFILEThickness 20 mm

Thickness 13 mm

Feet

Angle connector -Raw aluminium

Corner anglePack of 4.

Corner anglePack of 4.

MATWELL FRAME CUT TO MEASURE*

MATERIAL

Alu silver

Brass

MATERIALPRICE / METRE

17-23 mm 13 mm

Alu silver

Brass

MATERIAL

Alu silver


16/2014

1

2

3

4

5

mm

mm

mm mm

mm

Entrance matting Use this order form

Date: ....................................................................................

COMPANY: ............................................................................

Contact Person: ....................................................................

Address: ................................................................................

..............................................................................................Telephone: ............................................................................

Fax: .......................................................................................

Email: ....................................................................................

INDICATE IF THE DIMENSIONS ARE:(check box)

PURCHASE ORDER N:

QUOTE

FILL IN THE 5 MEASUREMENTSL1 - L2 - P1 - P2 - D =THE DIMENSION OF YOUR MAT WILL MATCHYOUR EXACT REQUIREMENTS!

We will deduce the appropriate sets from the boxes checkedin step 2.

Draw the location

of the door(s)

If diagonal (D) is not indicated, the mat will beconsidered with 90 square angles.

Length -

Length of profile (Width ) -

Length of profile (Width ) -

Length -

WALKING DIRECTION

Diag

onal

-D

Whenever possible, we try to make ENTRY CLEAN mat . However,in the case of big sizes it i s better to have several parts for easier handling.An installation diagram will be provided at the delivery of the mats.


17/2015

1

3

2

!

Entrance matting Chair mats

flexible material (rolled up), indicating which is the upperside when unrolled, as well as the walking direction.Ideally we would like to:

(lacks precision). We suggest to collect the template byUPS (add charge 50 euro)

or would like a quote for a non-rectangular shape

- NON RIGHT-ANGLED- SPECIFIC SHAPES

THE AREA QUOTED/INVOICED WILL BE THAT OF THERECTANGLE CONTAINING THE MATS SHAPE.

MINIMUM 10% EXTRA WILL BE CHARGED

Wherever possible we try to make ENTRY CLEANmats in one single piece. However, in the case of big sizes,dividing the mat into several parts can be an option justifiedby the following criteria:

will be applied for specific and suited packaging andtransport of mats with length and weight exceeding those above.

Some figures about the weight of some ENTRY CLEAN references:

2 of 12 mm Romat is 9.5 Kg.

2 of 17 mm Romat with PVC inserts is 16.5 Kg .

2 of Robust is 17.5 Kg.

TEMPLATE FOR SPECIAL SHAPES BIG SIZE MATS

ROMAT 2500 - 60

ROMAT GT 3000 - 60

ROBUST - ROBUSTJUNIOR

2300 1000 40

`ccgY`Um]b[Zcfccfprotection at events.Wcibh`Ygg]bghU``Uh]cb!removal

Polypropylenefibres

GIANT TILES 2x1 m - GREYLoose-lay big size removable tiles designed especiallyfor floor and surface protection at organized events:

At the end of the events, tiles are removed andoriginal flooring reappears.

Flat needle felt in tiles, 100% recycled calendered PVC backing.

Protects parquetsof sports halls

Thickness: 6 mm

Fire rating: BFL S1

Weight: 4.33 Kg/m2

Noise reduction: 19 dB


18/2016

Entrance matting

;iUfUbhYY)mYUfg8cYgbchhifbmY``ck

Chair mats

>> CONSTRUCTION:To protect floors from wear and tear caused by office chairs and armchairs.Made in Polycarbonate, robust, yellowing and UV resistant.

Containing no PVC, 100 recyclable, suitable for heated floors.Anti-slip, perfect grip on flooring.Thickness: 1.7 mm for smooth mats, 2 mm for spiked mats.

Rectangular shape with roundedcorners, bevelled edge.

CHAIRMATS

SPIKED CHAIRMATS

Transparent

Alu grey

Transparent For parquet,laminate

flooring, PVC,linoleum...

Brown

Alu grey

Black

3 extra opaquecolours

Cb\UfXccf

For textileflooring

:cfhYlh]`Yccf]b[

COLOURS

90 x 120 cm 120 x 150 cm

Transparent

Black

Brown

Alu grey

COLOURS

90 x 120 cm 120 x 150 cm

Transparent


19/2017

Entrance matting Washable entrance mats

Heavy traffic >> CONSTRUCTIONProfessional washable mat made from: fibres with coiledform to absorb maximum dust with reinforced borders for better resistanceto wear and tear and to improve stability.

ROCLEAN

ROCLEAN LOGO

Nitrile rubber soleand borders

polyamide fibres withcoiled form to retain

more dust.

Steel grey Red (on request)Dark brown

to the width of your mat

and multiply it by the length of the mat.

washable mat (width and length)when ordering

MADE TO MEASURE

HOW TO ORDER A LOGO WASHABLE MAT1 - Send us the sketch of the logo ideally in an EPS, PDF or AI file.(Additional Model Layout fee).2 - Specify the ground colour and the washing mat dimensions.3 - We will send you a modelwithin 48 hours for acceptance(invoiced separately)4 - We will manufacture thewashing mat within about 3weeks after acceptance of themodel.

the width of your matmultiply it by the length of the mat.

mat (width and length) when ordering

STANDARD SIZE

MADE TO MEASURE

Df]WYfY[UfX`YggcZh\Ynumber of colours:fYYacXY``Umcih

Textile weight: 760 g/m2

Total weight: 2260 g/m2

Thickness: 10 mm

Thickness of edges: 2.1 mm

Water absorption: 6 to 7 l / m2

Fire rating: EFL

85 x 150 cm

115 x 180 cm

WIDTH

under 85 cm

85 to 115 cm

116 to 150 cm

151 to 200 cm

WIDTH

under 85 cm

86 to 115 cm

116 to 150 cm

151 to 200 cm

Textile weight: 965 g/m2

Total weight: 2450 g/m2

Thickness: 8.5 mmThickness of edges: 2.1 mm

Water absorption: 6 to 7 l /m2

Fire rating: Cfl-s1

Dim. tolerance /- 3 to 5 mm

SIZE

85 x 150 cm

115 x 180 cm

200 x 300 cm


20/20

1

1

2

3

2

3

Entrance matting Washable entrance mats

3 strips ofdifferent nature =higher efficiency

>> CONSTRUCTION:TRIO BRUSH is a revolutionary heavy duty entrance mat made of90% of polypropylene and 10% of polyamide, in 3 strips.

The first strip is a polyamide brush forheavy scraping of rough dirt.

The second one is a polypropylene needlefelt strip scraping finer dirt (sand etc.)

The third one is a polyamide strip absorbing damp

>> ANTISTATIC

Trio Brush rolls are 2 m wide, unchangeable dimension.Min. length to be ordered: 1 linear meter. Cut to size on site.

TRIO BRUSH

PACK OF 200 STAINLESSSTEEL STUDS.Standard chevron-patterned head,anti-slip, 25 mm, total height 20 mm.Coefficient of friction on wet floor =0.53 (min. required value 0.25)

PACK OF 200 PLUGSSpecial PA6 polyamide plugs,for outdoors.

DRILLING TEMPLATESDimension 680 x 415 mm. Sheet iron, 3 mm, reusable.On a width of 40 cm, 147 holes can be drilled / m.

11 mm HOLES 9 mm HOLES

Without plug

With plug

Complies withstandardNFP 98351

Chemical fixingor installation

with plugs

Loose

A2 tactile stainless steel studs for indoor and outdoor use.Use of a drilling template is highly recommended for a time-saving and standardized installation.

Studs can be installed in two ways depending on floor type:

Installation with plugs.Drill a hole 30 mm deep into the support using a 11 mmdrill for concrete.Place the plug on the stud and hammer them in using arubber mallet.

Installation without plugs.Drill a hole 25 mm deep into the support using a 9 mm drillfor concrete.Use a two-component sealing resin and insert the stud.Drill a 8.5 mm hole.Use a wood - metal neoprene adhesive for outdoor use,

Anthracite Brown

RedGreen grey

LENGTH TOBE SPECIFIED

COLOURS

Anthracite

Brown

Green grey

Red

Weight 2750 gr/m2

Total thickness 13 mm

Sublayer 3 mm latex

Fire rating EFL

Water absorption 6 l/m2

Documents

Catalog ROMUS 2012 - Bariere de Praf