Catalog Frialit Xive

FRIALIT® & XiVE®

ANKYLOS®

FRIOS®

PEPGEN P-15®

FRIALIT® & XiVE®

Catalog

0607

09/S

B

ArtKat_FX_Tit_E_rev007 21.06.2007, 10:56 Uhr3

2

FRIALIT® & XiVE®

Catalog

FRIALIT® & XiVE® –Two implant designs, one prosthesis!

The pictures in this catalog are for illustration. The size ofthe illustrated products may deviate from the originalproduct.

DENTSPLY Friadent reserves the right to make anytechnical changes without prior notice.

Information regarding the materials involved in implants,system components and instruments is given in the form ofa reference number after every article: FRIADENT®

Gingiva Former2.Page 87 of this catalog presents an overview of thematerials and the composition of the materials used.

FRIALIT® – The root-analog implant with unlimitedprosthetic options for ultimate esthetics.

XiVE® – The implant design for accelerated treatment withhighest primary stability in all bone qualities.

Ultimate esthetics and accelerated treatment – theFRIALIT® and XiVE® implant options cover all indications.The identical implant-abutment-connection of FRIALIT®

and XiVE® S implants provides a unique platform for theoptimal realization of all prosthetic concepts using thecomponents of FRIADENT® Prosthetics.

XiVE® TG – The transgingival alternative. Single-stagetransgingival XiVE® TG Screw Implants are available inaddition to the subgingival implant design. The super-structure is produced with XiVE® TG prosthetic linecomponents.FRIALIT®

ImplantsXiVE® SImplants

XiVE® TGImplants

XiVE® TGProstheticsFRIADENT® Prosthetics

ArtKat_FX_FRIALIT_1E_rev007 21.06.2007, 11:05 Uhr2

3

FRIA

LIT®

XiV

E®X

iVE®

TG

FRIA

DEN

T® P

rosth

etic

sfo

r FR

IALI

T® &

XiV

E® S

Pres

enta

tion

mat

eria

l

FRIALIT® Implants 4

Pre-surgical planning 6Implant placement 9Instruments for implant placement 12

XiVE® Implants 20

Pre-surgical planning 22Implant placement 24Instruments for implant placement 28

FRIADENT® Prosthetics 38

Uncovery 42

Fabrication of superstructure at implant levelSoft tissue management,Provisional restorations 43Impression making 46Prosthetics/laboratory 49

Fabrication of superstructure at gingival level(MP-Abutment)Transgingival extension, temporary sealing 55Impression making 57Prosthetics/laboratory 58

Instruments for impression making/prosthetics/laboratory 62

XiVE® TG Implants and Prosthetics 66

Implant placement 68Instruments for implant placement 70Impression making 72Prosthetics/laboratory 73Instruments for impression making/prosthetics/laboratory 76

Presentation material 78

Appendix 79

Materials 79

Content

Additional DENTSPLY Friadent Product CatalogsOrder No. 6-252004 for ANKYLOS®

Order No. 6-302017 for FRIOS® and PEPGEN P-15®


FRIALIT®

FRIALIT® plus Implants –Prevention instead of interventionfor perfect esthetics

Innovative esthetic implant concepts should considertooth-by-tooth replacement as early as possible.FRIALIT®, the first root-analog implant geometry in theworld, offers perfect esthetics of peri-implant soft tissues,excellent prosthetic results and long-term success.Following nature’s design, FRIALIT® implants steppeddesign ensures an optimum transfer of occlusal forces.The anatomical diameters allow support of the alveolarbone, reconstruction of the interproximal space andmaintenance of the papillae. Perforating the buccal plateor injuring converging roots during surgery can beavoided since the apical end of the implant is narrower.The implant-abutment connection provides the utmost instability with long parallel-walled sections to resist lateralforces and a deep internal hex to prevent rotation.

4


FRIA

LIT®

FRIA

LIT®

Indications

Cases:■ where hard and soft tissue atrophy can be prevented

through immediate or delayed-immediate implantplacement

■ with high esthetic demands, particularly in the anteriorregion

■ requiring a natural “emergence profile” based on thecrestal-anatomical implant diameter

■ where trauma to the labial or buccal wall or adjacentanatomical structures can be prevented by using root-analog stepped implants

■ planned for tooth-by-tooth reconstruction

Macro-design

Root-analog, stepped design provides functional transferof occlusal forces, supports peri-implant bone andoverlying soft tissue. The interproximal space and thepapillae are preserved based on the anatomy.

Micro-design

The synchronized thread design of the FRIALIT® plusstepped screw offers increased self-tapping efficiency incortical bone and optimum primary stability with secureretention in soft spongy bone – ideal in all bone qualities.

Nano-design

Growth-activating FRIADENT® plus surface. Steppedscrew implant with trimodal surface morphologyproviding an ideal environment for functional adaptationof epithelium, connective tissue and bone.

Implant diameters

D 3.4 D 3.8 D 4.5 D 5.5 D 6.5

FRIALIT® � � � � �

5


6

Pre-surgical planning

45 – 5020 FRIALIT® Select Basic Set CompleteThe Basic Set includes for each implant diameter– one straight FRIADENT® Select Try-in Abutment and the

D 3.4 and D 3.8/A 15 angled Select Try-in Abutment– one FRIADENT® Select Sleeve and the pin– one FRIALIT® Select Try-in Implant– Implant Forceps– one Select Tray

Try-in Abutments

Gingival height, angulation and the correct position of the horizontal screw(GH 2) for FRIADENT® abutments can easily and quickly be determined withthe FRIADENT® Select Try-in Abutments.

45 – 2190 FRIADENT® Basic Set Select Try-in AbutmentThe Basic Set consists of a FRIADENT® Select Try-in AbutmentA 0, straight for each implant diameter and the FRIADENT®

Select Try-in Abutments D 3.4 and D 3.8/A 15, angled.

FRIADENT® Select Try-in Abutment2

45 – 2120 – � D 3.4/A 0 (straight)45 – 2121 – � D 3.8/A 0 (straight)45 – 2122 – � D 4.5/A 0 (straight)45 – 2123 – � D 5.5/A 0 (straight)45 – 2220 – � D 3.4/A 15 (angled 15°)45 – 2221 – � D 3.8/A 15 (angled 15°)

FRIADENT® Select Multipack Try-in Abutment (3 pieces)

45 – 2193 – � D 3.4/A 0 (straight, 3 pieces)45 – 2194 – � D 3.8/A 0 (straight, 3 pieces)45 – 2195 – � D 4.5/A 0 (straight, 3 pieces)45 – 2196 – � D 5.5/A 0 (straight, 3 pieces)45 – 2293 – � D 3.4/A 15 (angled 15°, 3 pieces)45 – 2294 – � D 3.8/A 15 (angled 15°, 3 pieces)

Order No. Article

FRIADENT® Select Try-in Abutments and Sleeves can be used either forFRIALIT® or XiVE® implants. The design of the Select Try-in Abutments has beenadapted to the special implant geometries. Therefore, different Try-in Implants(FRIALIT® or XiVE®) have to be used for FRIALIT® and XiVE®.


7

FRIA

LIT®

Sleeves

FRIADENT® Select Sleeves allow for an exact transfer of the pre-prostheticplanning to the clinical situation.

45 – 5090 FRIADENT® Select Basic Set SleeveThe Basic Set contains one pin and one FRIADENT® SelectSleeve per implant diameter.

FRIADENT® Select Sleeve2

without pin

45 – 5035 – � D 3.445 – 5045 – � D 3.845 – 5055 – � D 4.545 – 5065 – � D 5.545 – 5075 – � D 6.5

FRIADENT® Multipack Select Sleeve(3 pieces, without pin)

45 – 5095 – � D 3.4 (3 pieces)45 – 5091 – � D 3.8 (3 pieces)45 – 5092 – � D 4.5 (3 pieces)45 – 5093 – � D 5.5 (3 pieces)45 – 5094 – � D 6.5 (3 pieces)

91 – 4502 FRIADENT® Khoury Drill Guide Pin2

Try-in Implants

With FRIALIT® Select Try-in Implants you can verify implant position, implantaxis and the implant position in relation to the bone crest during surgery. Thethickness of the the soft tissue can be measured.

45 – 5080 FRIALIT® Select Basic Set Try-in ImplantThe Basic Set contains one FRIALIT® Select Try-in Implantper implant diameter.

FRIALIT® Select Try-in Implant2

45 – 5030 – � D 3.445 – 5040 – � D 3.845 – 5050 – � D 4.545 – 5060 – � D 5.545 – 5070 – � D 6.5

FRIALIT® Multipack Select Try-in Implant (3 pieces)

45 – 5085 – � D 3.4 (3 pieces)45 – 5081 – � D 3.8 (3 pieces)45 – 5082 – � D 4.5 (3 pieces)45 – 5083 – � D 5.5 (3 pieces)45 – 5084 – � D 6.5 (3 pieces)

Order No. Article


8

Order No. Article


48 – 0040 FRIALIT® Select Tray (empty)

Others

49 – 1211 FRIADENT® Radiographic Balls for pre-surgical planning6

(Ø 5 mm), quantity: 12

45 – 5570 FRIALIT® Radiographic Template(Scales 1:1; 1.3:1; 1.7:1)


9

FRIA

LIT®

Implant placement

FRIADENT® sterile packagingfor implants

All FRIADENT® implants are packed in gamma sterilized,sealed transparent double vials. An adhesive label sealsthe color-coded cap with the non-sterile outer vial. Theblister is also non-sterile.

■ Transparent outer vial –to see the content

■ Color-coded cap displaying the implant length –for clear identification

■ Sterile inner vial with implant retaining stopper –for fast and safe no-touch placement of implants

■ Peel-off labels –for a reliable documentation

FRIADENT® sterile packaging forFRIALIT® Screw Implants

No-touch insertion FRIALIT® implants

The undamaged label clearly indicates that thesterile package has not been opened and thus

product sterility.

1. Remove the cap from theouter vial (non-sterile)

and slide the inner vial(sterile) onto the surgicaltray.

Color-coded cap matchingthe implant diameter

Retaining stopper

Cover screw

Stepped screw withplacement head

Polycarbonateinner vial (sterile)

Outer vial (non-sterile)

The Cover Screw of FRIALIT® SteppedCylinders is already in the implant.

2. Remove the implant viathe silicone stopper withouttouching the inner vial.

3. Insert the FRIALIT® implant dependent on the implanttype. Please follow the instructions for use.


10


11

Implant placement

Implants (sterile)

FRIALIT® plus Stepped ScrewContent: Stepped Screw, Placement Head2

and Cover Screw2

36 – 0431 – � D 3.4/L 11 3

36 – 0433 – � D 3.4/L 13 3

36 – 0435 – � D 3.4/L 15 3

36 – 0441 – � D 3.8/L 11 2

36 – 0443 – � D 3.8/L 13 2

36 – 0445 – � D 3.8/L 15 2

36 – 0450 – � D 4.5/L 8 2

36 – 0451 – � D 4.5/L 10 2

36 – 0453 – � D 4.5/L 13 2

36 – 0455 – � D 4.5/L 15 2

36 – 0460 – � D 5.5/L 8 2

36 – 0461 – � D 5.5/L 10 2

36 – 0463 – � D 5.5/L 13 2

36 – 0465 – � D 5.5/L 15 2

36 – 0471 – � D 6.5/L 10 2

36 – 0473 – � D 6.5/L 13 2

36 – 0475 – � D 6.5/L 15 2

Order No. Article

FRIA

LIT®

Before rotating the FRIALIT® Screw Implant into place, the Placement Head isremoved with the 0.9 mm FRIADENT® Hex Driver. To complete the insertion,use the FRIALIT® Stepped Screw Implant Driver for ratchet or handpiece(see page 18).

The Cover Screw for FRIALIT® Stepped Screw Implants is located in thesilicone stopper of the inner vial.

The Cover Screws are seated in with the 0.9 mm FRIADENT® Hex Driver orwith the blade width 2.0 mm FRIADENT® Screwdriver.

FRIADENT® Cover Screw for Implants2

45 – 1130 – � D 3.445 – 1140 – � D 3.845 – 1150 – � D 4.545 – 1160 – � D 5.545 – 1170 – � D 6.5


12

Instruments for implant placement

FRIALIT®

Stepped Screw D 3.4FRIALIT®

Stepped Cylinder D 3.4

FRIALIT®

Twist DrillD 2.0

FRIALIT®

Round Drill

FRIALIT®



FRIALIT®



FRIALIT®



FRIALIT®



FRIALIT®

Stepped DrillD 3.4

A successful implant placement requires precise andcareful implant site preparation. Therefore, please followour recommendations for drilling exactly.

FRIALIT® Twist Drills and Stepped DrillsFRIALIT® Twist Drills and Stepped Drills are used at800 rpm. In very dense cortical bone the diameter5.5 mm and 6.5 mm stepped drills are used at amaximum speed of 400 to 500 rpm. During thepreparation make sure drills are adequately internallyand externally irrigated.

FRIALIT® Cortical DrillDense cortical bone (type I bone)frequently exhibits elastic forces afterimplant site preparation.Additional preparation of the topstep with the FRIALIT® Cortical Drillcan compensate for this effect.

The FRIALIT® Cortical Drill gentlyexpands the implant site asrequired by increasing the diameter

of the first step by 1/10 mm andthus allows for an easy and atraumatic implant insertionavoiding a too high insertion torque.

FRIALIT® BoneCondenserIn cases of poor bone quality, FRIALIT® BoneCondenserscan be used for lateral and apical implant sitecondensation. This improvement of bone quality andquantity enhances primary implant stabilization.

The FRIALIT® drill sequence


13

FRIA

LIT®

FRIALIT®

Stepped DrillD 3.8

FRIALIT®

Stepped DrillD 5.5

Cortical DrillD 4.5

Cortical DrillD 5.5

Cortical DrillD 6.5

FRIALIT®

Stepped DrillD 6.5

Cortical DrillD 3.8

FRIALIT®

Stepped DrillD 4.5

For type I bone


14

FRIALIT Sets Surgical Instruments

The instrument sets contain all instrumentsrequired for implant placement.The kits are supplied in the new FRIALIT Surgical Tray.

45 – 8072 FRIALIT Basic Set Surgery

45 – 8090 FRIALIT Expert Set Surgery

Contents: StarterSet ExpertSet

Radiographic Balls for pre-surgicalplanning (5 pcs.) ■ ■

FRIALIT® Select Try-in ImplantStarterSet ■

FRIALIT® Select Try-in ImplantD 3.4 ■

FRIADENT® Select Try-in AbutmentStarterSet ■

FRIADENT® Select Try-in AbutmentD 3.4 ■

FRIADENT® Select Try-in AbutmentD 3.4/A 15 (angled 15°) ■

Fitting Tool for Depth Stops ■ ■

Depth Gauge D 2 ■ ■

Twist Drill D 2 (with 4 Depth Stops) ■ ■

Stepped Drill D 3.4 (with 5 Depth Stops) ■ ■

Round Drill ■ ■

Stepped Drill D 3.8 universal(with 4 Depth Stops) ■ ■

Stepped Drill D 4.5/L 8 ■

Stepped Drill D 4.5/L 10 ■ ■










Cortical Drill D 3.8 ■




Drill Extension ■

Long Internal Irrigation Tube ■

Drill Cleaning Instrument ■ ■

Contents: StarterSet ExpertSet

Handpiece Stepped ScrewImplant Driver D 3.8 – D 6.5 ■

Handpiece Stepped ScrewImplant Driver D 3.4 ■

Ratchet Stepped ScrewImplant Driver

– 12 mm ■ ■

– 16 mm ■ ■

– 20 mm ■ ■

FRIADENT Ratchet ■ ■

FRIADENT Ratchet Insert forImplant Driver ■ ■

Seating Instrumentfor Cylinder Implants standard ■ ■

Seating Instrumentfor Cylinder Implants posterior ■ ■

Handpiece Hex Driver0.9 mm ■ ■

Ratchet Hex Driver0.9 mm ■ ■

Handpiece Slot Screwdriver ■

Ratchet Slot Screwdriver ■

Implant Forceps ■ ■

Surgical Tray ■ ■

Order No. Article



15

Drills6

All FRIALIT® Drills are provided with internal irrigation. Please replace thecutting instruments after approximately 20 uses or if they are damaged ordull.

45 – 5102 FRIALIT® Twist Drill D 26 (with 4 Depth Stops)

45 – 5130 FRIALIT® Round Drill6

FRIALIT® Stepped Drill6

45 – 5331 – � D 3.4 universal (with 5 Depth Stops)

45 – 5340 – � D 3.8 universal (with 4 Depth Stops)

45 – 5350 – � D 4.5/L 845 – 5351 – � D 4.5/L 1045 – 5353 – � D 4.5/L 1345 – 5355 – � D 4.5/L 15

45 – 5360 – � D 5.5/L 845 – 5361 – � D 5.5/L 1045 – 5363 – � D 5.5/L 1345 – 5365 – � D 5.5/L 15

45 – 5371 – � D 6.5/L 1045 – 5373 – � D 6.5/L 1345 – 5375 – � D 6.5/L 15

45 – 5101 FRIALIT® Drill Depth Stop Tool6

(two-piece)

FRIALIT® Cortical Drill6

45 – 5349 – � D 3.845 – 5359 – � D 4.545 – 5369 – � D 5.545 – 5379 – � D 6.5

The FRIALIT® Cortical Drill is used to prepare the coronal section of the implantsite in very dense cortical bone.

45 – 5280 FRIADENT® Drill Cleaning Instrument6

91 – 0003 FRIADENT® Drill Extension6

90 – 5042 FRIOS® Contra-angle Handpiece 20:1 Irrigation Tube

90 – 5043 Long Internal Irrigation Tube (for Drill Extension)

The drill extension must always be used with the long internal irrigation tube.

Order No. Article

FRIA

LIT®


16

FRIALIT BoneCondenser

FRIALIT® BoneCondenser can be used in reduced bone quality to condensethe lateral and apical bone of the implant site. The improved bone qualityand quantity increases implant primary stability.

FRIALIT Instrument Set BoneCondenser, straightwith tray

45 – 8550 � � Instruments Set for diameter D 3.8 – D 4.5(surgical tray with six instruments)

45 – 8560 � � � Instruments Set for diameter D 3.8 – D 5.5(surgical tray with nine instruments)

45 – 8570 � � � � Instruments Set for diameter D 3.8 – D 6.5(surgical tray with twelve instruments)

FRIALIT® BoneCondenser, straight25/6

45 – 5402 – � D 2.045 – 5403 – � D 3.045 – 5440 – � D 3.8

45 – 5451 – � D 4.5 /L 1045 – 5453 – � D 4.5 /L 1345 – 5455 – � D 4.5 /L 15

45 – 5461 – � D 5.5 /L 1045 – 5463 – � D 5.5 /L 1345 – 5465 – � D 5.5 /L 15

45 – 5471 – � D 6.5 /L 1045 – 5473 – � D 6.5 /L 1345 – 5475 – � D 6.5 /L 15

FRIALIT® Instrument Set BoneCondenser, angledwith tray

45 – 8950 � � Instruments Set for diameter D 3.8 – D 4.5(surgical tray with six instruments)

45 – 8960 � � � Instruments Set for diameter D 3.8 – D 5.5(surgical tray with nine instruments)

45 – 8970 � � � � Instruments Set for diameter D 3.8 – D 6.5(surgical tray with twelve instruments)

Order No. Article



17

FRIALIT® BoneCondenser, angled25/6

45 – 5902 – � D 2.045 – 5903 – � D 3.045 – 5940 – � D 3.8

45 – 5951 – � D 4.5 /L 1045 – 5953 – � D 4.5 /L 1345 – 5955 – � D 4.5 /L 15

45 – 5961 – � D 5.5 /L 1045 – 5963 – � D 5.5 /L 1345 – 5965 – � D 5.5 /L 15

45 – 5971 – � D 6.5 /L 1045 – 5973 – � D 6.5 /L 1345 – 5975 – � D 6.5 /L 15

The angled FRIALIT® BoneCondenser are used when limited space isavailable and for the posterior region.

48 – 0060 FRIALIT® BoneCondenser Tray5/6/26 (empty)

FRIALIT® BoneExpander

FRIALIT® BoneExpander are used for the local expansion of the narrowatrophied jaw.

45 – 8870 FRIALIT® Instrument Set BoneExpanderwith tray� � � � Instruments Set for diameter D 3.8 – D 6.5(surgical tray with twelve instruments)

FRIALIT® BoneExpander25/6

45 – 5802 – � D 2.045 – 5803 – � D 3.045 – 5840 – � D 3.8

45 – 5851 – � D 4.5 /L 1045 – 5853 – � D 4.5 /L 1345 – 5855 – � D 4.5 /L 15

45 – 5861 – � D 5.5 /L 1045 – 5863 – � D 5.5 /L 1345 – 5865 – � D 5.5 /L 15

45 – 5871 – � D 6.5 /L 1045 – 5873 – � D 6.5 /L 1345 – 5875 – � D 6.5 /L 15

48 – 0050 FRIALIT® BoneExpander Tray5/6/26 (empty)

FRIA

LIT®

Order No. Article


18

Other instruments

45 – 5106 FRIADENT® Paralleling Pin2

45 – 5709 FRIADENT® Ratchet6, without inserts

45 – 5711 FRIADENT® Ratchet Insert for Implant Driver6

FRIALIT® Ratchet Stepped Screw Implant Driver6

46 – 5512 – 12 mm46 – 5516 – 16 mm46 – 5520 – 20 mm

FRIALIT® Handpiece Stepped Screw Implant Driver4

45 – 5519 – � for D 3.445 – 5510 – � � � � for D 3.8 – D 6.5

FRIADENT® Depth Gauge2

45 – 5104 – D 2.045 – 5100 – D 3.0

Order No. Article

FRIADENT® Periotome

The FRIADENT Periotome is ideally designed for atraumaticresidual root and tooth removal.

45 – 5500 FRIADENT® Periotome Handle6

FRIADENT® Periotome Blade6

45 – 5501 – P 1 (straight, wide)45 – 5502 – P 2 (straight, narrow)45 – 5503 – P 3 (angled, narrow)



19

FRIADENT® Handpiece Hex Driver6

45 – 5651 – width 0.9 mm

FRIADENT® Handpiece Slot Screwdriver6

45 – 5640 – blade width 2.0 mm

FRIADENT® Ratchet Hex Driver6

with torque limit45 – 5732 – width 0.9 mm/14 Ncm/short45 – 5733 – width 0.9 mm/14 Ncm/long45 – 5734 – width 1.22 mm/24 Ncm/short45 – 5736 – width 1.22 mm/24 Ncm/long

FRIADENT® Ratchet Slot Screwdriver6

with torque limit45 – 5714 – blade width 2.0 mm/14 Ncm/short45 – 5722 – blade width 2.0 mm/14 Ncm/long

FRIADENT® Hex Driver6

without torque limit45 – 5650 – width 0.9 mm

The 0.9 mm FRIADENT® Hex Driver without torque limit is recommended forregions with limited access.

91 – 4510 FRIADENT® Implant Mallet6/20

91 – 4515 FRIADENT® Implant Forceps2 (titanium)

FRIALIT® Trephine Drill6

45 – 5654 – � D 3.445 – 5655 – � D 3.845 – 5656 – � D 4.545 – 5657 – � D 5.545 – 5658 – � D 6.5

FRIA

LIT®

Order No. Article


20

XiVE®

XiVE® plus Implants –As simple as possible,as flexible as necessary

The goal of implant dentistry is to make treatmentsimpler, faster and as easy as possible for your patients.The XiVE® implants offer an accelerated procedure withmultiple prosthetic options without requiring expensiveand complicated surgical and laboratory techniques.XiVE® cylindrical screw implants combine increasedprimary stability in all types of bone with a standardizedprosthetic platform including the option of immediateloading. Through its thread design and simplified surgicalprocedure, XiVE® offers an implant for all types of bone.The internal implant-abutment connection, which has beenproven for over 10 years, is fully compatible with theprosthetic components and instruments of FRIALIT®. Thisuniversal prosthetic platform technology greatly simplifieslife for the restorative dentist.

ArtKat_FX_XiVE_2E_rev007 21.06.2007, 11:10 Uhr20

21

Indications

Cases:■ with atrophied ridges where augmentation is not

desired or indicated■ multiple implant restorations in posterior regions■ where a cylindrical implant design is advantageous –

particularly in the lateral region■ where a subgingival and/or a transgingival implant

design is indicated■ with limited interproximal space: narrowest implant

diameter = 3.0 mm■ where the local bone must be used to the maximum

possible extent: implant lengths available range from8 to 18 mm

■ requiring increased primary stability for early orimmediate implant function

■ when temporary and definitive components are neededfor simple and fast prosthetic restoration

Macro-design

The cylinder-shaped design for internal condensation ofthe peri-implant bone prevents trauma and increasesprimary stability of implants, even in spongy bone.

Micro-design

The innovative thread design of XiVE® screw implantscombined with the bone-class-specific preparation of theimplant site provides torque stabilization in all bonequalities.

Nano-design

Growth-activating FRIADENT® plus surface. Screw implantwith trimodal surface morphology providing an idealenvironment for functional adaptation of epithelium,connective tissue and bone.

Implant diameters

XiV

E®X

iVE®

TG

D 3.0 D 3.4 D 3.8 D 4.5 D 5.5

XiVE® S � � � � �

XiVE® TG � � �

Article overviewXiVE® TG seepage 66


22


Try-in Abutments

Gingival height, angle and the correct position of the horizontal screw (GH 2)for FRIADENT® abutments can easily and quickly be determined with theFRIADENT® Select Try-in Abutments.

FRIADENT® Select Try-in Abutments2

45 – 2119 – � D 3.0/A 0 (straight)45 – 2120 – � D 3.4/A 0 (straight)45 – 2121 – � D 3.8/A 0 (straight)45 – 2122 – � D 4.5/A 0 (straight)45 – 2123 – � D 5.5/A 0 (straight)45 – 2219 – � D 3.0/A 15 (angled 15°)45 – 2220 – � D 3.4/A 15 (angled 15°)45 – 2221 – � D 3.8/A 15 (angled 15°)

Sleeves

FRIADENT® Select Sleeves allow for an exact transfer of the pre-prostheticplanning to the clinical situation.

FRIADENT® Select Sleeves2

without pin

45 – 5025 – � D 3.045 – 5035 – � D 3.445 – 5045 – � D 3.845 – 5055 – � D 4.545 – 5065 – � D 5.5

91 – 4502 FRIADENT® Khoury Drill Guide Pin2

Order No. Article


23

Try-in Implants

With XiVE® Select Try-in Implants you can verify implant position, implantaxis and the implant position in relation to the bone crest during surgery. Thethickness of the soft tissue can be measured.

26 – 1510 XiVE® Depth Gauge2 D 2.0

26 – 1500 XiVE® Select Basic Set Try-in ImplantThe Basic Set contains one XiVE® Select Try-in Implantper implant diameter (D 3.0 – D 5.5).

XiVE® Select Try-in Implant2

26 – 1520 – � D 3.026 – 1530 – � D 3.426 – 1540 – � D 3.826 – 1550 – � D 4.526 – 1560 – � D 5.5

Others

49 – 1211 FRIADENT® Radiographic Balls for pre-surgical planning6

(Ø 5 mm), 12 pieces

26 – 9020 XiVE® Radiographic Template (subgingival)

25 – 5206 XiVE® TG Radiographic Template (transgingival)

XiV

E®

Order No. Article


24


25

Implant placement

FRIADENT® sterile packagingfor screw implants

All FRIADENT® screw implants are packaged in gamma-sterilized, sealed transparent double vials with color-coded caps.





FRIADENT® sterile packagingfor XiVE® S plus Screw Implants

XiV

E®

No-touch insertion XiVE® S plusScrew Implant

1. Remove the outer vial cap (non sterile) anddrop the sterile inner vial onto the surgical tray.

4. Remove the implantwithout touching the innervial.

5. By doing so, the implantholder falls apart in twohalves.

2. Remove the siliconestopper from the inner vial.

The implant cover screw islocated in the siliconestopper of the inner vial.

3. Place the XiVE® Ratchetor Handpiece ImplantDriver D 3.4/TempBaseinto the internal hex of theFRIADENT® TempBase.

Outer vial(non-sterile)

Inner vial (sterile):contains implant

and TempBase(pre-mounted to

implant)

Retaining stopper:contains implant

cover screw

Implant holder


product sterility.

6. Insert the XiVE® S plus Screw Implant.Please follow the instructions for use.


26

Implant placement

Implants (sterile)

XiVE® S plus Screw ImplantContent: Screw Implant2, TempBase2,Cover Screw2

26 – 1422 – � D 3.0/L 1126 – 1423 – � D 3.0/L 1326 – 1425 – � D 3.0/L 15

26 – 1431 – � D 3.4/L 9,526 – 1432 – � D 3.4/L 1126 – 1433 – � D 3.4/L 1326 – 1435 – � D 3.4/L 1526 – 1438 – � D 3.4/L 18

26 – 1440 – � D 3.8/L 826 – 1441 – � D 3.8/L 9,526 – 1442 – � D 3.8/L 1126 – 1443 – � D 3.8/L 1326 – 1445 – � D 3.8/L 1526 – 1448 – � D 3.8/L 18

26 – 1450 – � D 4.5/L 826 – 1451 – � D 4.5/L 9,526 – 1452 – � D 4.5/L 1126 – 1453 – � D 4.5/L 1326 – 1455 – � D 4.5/L 1526 – 1458 – � D 4.5/L 18

26 – 1460 – � D 5.5/L 826 – 1461 – � D 5.5/L 9,526 – 1462 – � D 5.5/L 1126 – 1463 – � D 5.5/L 1326 – 1465 – � D 5.5/L 15

All XiVE® S Screw Implants are packaged with the FRIADENT® TempBase formounting the implant driver.

To rotate the XiVE® S Screw Implant into place, use the XiVE® Driver for Ratchetor Handpiece (see page 36). Once the implant is seated, the TempBaseRetaining Screw is loosened with the 0.9 mm FRIADENT® Hex Driver. Then theTempBase removed.The Cover Screw for XiVE® S Screw Implants is located in the silicone stopperof the inner vial.The Cover Screws are threaded in with the 0.9 mm FRIADENT® Hex Driver.

Order No. Article


27

FRIADENT® TempBase

The FRIADENT® TempBase serves as implant holder and placement head.It is included in the XiVE® S plus Screw Implant.

In addition, with the FRIADENT® TempBase Cap (please order separately) theTempBase can be used for■ an immediate registration to fabricate a temporary during the healingperiod■ an immediate provisional restoration (single tooth or multiple implantprovisional).

FRIADENT® TempBasewith Retaining Screw TempBase

46 – 1220 – � D 3.0 4

46 – 1230 – � D 3.4 4

46 – 1240 – � D 3.8 4

46 – 1250 – � D 4.5 4

46 – 1260 – � D 5.5 4

FRIADENT® TempBase Cap28

46 – 1235 – � � � D 3.0 and D 3.846 – 1255 – � D 4.546 – 1265 – � D 5.5

FRIADENT® Retaining Screw TempBase4

46 – 1279 – � D 3.046 – 1280 – � � � � D 3.4 – D 5.5

FRIADENT® Cover Screw for Implants2

45 – 1120 – � D 3.045 – 1130 – � D 3.445 – 1140 – � D 3.845 – 1150 – � D 4.545 – 1160 – � D 5.5

XiV

E®

Order No. Article


28

0,5 mm

18 mm

15 mm13 mm11 mm9,5 mm

8 mm

Crestal preparationto achieve the internal condensation effect:XiVE® Twist Drill crestal

The crestal drilling varies between 2 and 6 mmbased on the bone quality. Thus, an optimalprimary stability of the implant in all types ofbone is achieved.


XiVE® S plusall implants

D 3.0

XiVE® S plus andXiVE® TG plusall implants

D 3.4


D 3.8


D 4.5

XiVE® S plusall implants

D 5.5

XiVE®

Twist Drillposterioror anteriorD 2.0

XiVE®

RoundDrill

A successful implant placement requires precise andcareful implant site preparation. Therefore, please followour recommendations for drilling exactly.

Pilot hole:XiVE® D 2.0 Twist Drill (posterior or anterior)XiVE® Twist Drills and Twist Drills crestal are used at800 rpm. During the preparation make sure drills areadequately internally and externally irrigated. Optimumflow volume is guaranteed if separate sources are usedfor internal and external irrigation.

Marking: XiVE® Round Drill

Preparation of the implant site:XiVE® Twist Drill (posterior or anterior),starting with D 3.0 and increasing in diameter until thefinal implant diameter is reached.

The XiVE® drill sequence

Twist Drillanterior

Twist Drillposterior

XiVE® SL 13

XiVE® TGL 13

Pre-tapping the implant thread:In very cortical bone, pre-tapping of the implant site at15 rpm is required in the crestal area after the initial6 mm deep preparation. The XiVE® Tap can be used toreduce the crestal torque achieved during insertion ofimplants.

Pre-tapping the implant sitein type I bone

Bone D IV:2 mm

Bone D I – D III:up to 6 mm

6 mm2 mm

Crestal depth preparation


29

XiVE®


XiVE®


XiVE®


XiVE®


XiVE®

Twist Drillposterior oranteriorD 5.5

XiVE®

Twist DrillcrestalD 3.0

XiVE®


XiVE®


XiVE®


XiVE®


XiVE®

TapD 3.0

XiVE®

TapD 3.4

XiVE®

TapD 3.8

XiVE®

TapD 4.5

XiVE®

TapD 5.5

XiV

E®

XiVE® BoneCondenser:In cases of poor bone quality, XiVE® BoneCondensers canbe used for lateral and apical implant site condensation.This improvement of bone quality and quantity enhancesprimary implant stabilization.

For type Ibone


30


XiVE® Instrument Sets Surgery

The XiVE® Instrument Sets Surgery contain the instrumentsrequired for implant placement.The kits are supplied in the XiVE® Surgical Tray.

26 – 8000 XiVE® Expert Set Surgery

26 – 8005 XiVE® Standard Set Surgery

Radiographic Balls for pre-surgical planning 5 5

XiVE® S Radiographic template 1 1XiVE® TG Radiographic template 1 1

FRIADENT® Select Try-in Abutment D 3.0/A 0 1 –FRIADENT® Select Try-in Abutment D 3.4/A 0 1 –FRIADENT® Select Try-in Abutment D 3.8/A 0 1 –FRIADENT® Select Try-in Abutment D 4.5/A 0 1 –FRIADENT® Select Try-in Abutment D 5.5/A 0 1 –FRIADENT® Select Try-in Abutment D 3.0/A 15 1 –FRIADENT® Select Try-in Abutment D 3.4/A 15 1 –FRIADENT® Select Try-in Abutment D 3.8/A 15 1 –

Depth Gauge D 2.0 3 3

XiVE® Select Try-in Implant D 3.0 1 –XiVE® Select Try-in Implant D 3.4 1 –XiVE® Select Try-in Implant D 3.8 1 –XiVE® Select Try-in Implant D 4.5 1 –XiVE® Select Try-in Implant D 5.5 1 –

Twist Drill posterior D 2.0/L 8–15 1 1Twist Drill anterior D 2.0/L 8–18 1 –

Round Drill 1 1

Twist Drill posterior D 3.0/L 8–15 1 1Twist Drill posterior D 3.4/L 8–15 1 1Twist Drill posterior D 3.8/L 8–15 1 1Twist Drill posterior D 4.5/L 8–15 1 1Twist Drill posterior D 5.5/L 8–15 1 1

Twist Drill anterior D 3.0/L 8–18 1 –Twist Drill anterior D 3.4/L 8–18 1 –Twist Drill anterior D 3.8/L 8–18 1 –Twist Drill anterior D 4.5/L 8–18 1 –Twist Drill anterior D 5.5/L 8–18 1 –

Twist Drill crestal D 3.0 1 1Twist Drill crestal D 3.4 1 1Twist Drill crestal D 3.8 1 1Twist Drill crestal D 4.5 1 1Twist Drill crestal D 5.5 1 1

XiVE® Tap Set 1 1Drill Extension 1 1

Long Internal Irrigation Tube 1 1Drill Cleaning Instrument 1 1

Ratchet Implant Driver posterior for Screw Implants D 3.0 1 1Ratchet Implant Driver posterior for Screw Implants and TempBase D 3.4–D 6.5 1 1Ratchet Implant Driver anterior for Screw Implants D 3.0 1 1Ratchet Implant Driver anterior for Screw Implants and TempBase D 3.4–D 6.5 1 1Handpiece Implant Driver posterior for Screw Implants D 3.0 1 1Handpiece Implant Driver posterior for Screw Implants and TempBase D 3.4 1 1Handpiece Implant Driver posterior for Screw Implants D 3.8–D 6.5 1 1Handpiece Implant Driver anterior for Screw Implants D 3.0 1 1Handpiece Implant Driver anterior for Screw Implants and TempBase D 3.4 1 1Handpiece Implant Driver anterior for Screw Implants D 3.8–D 6.5 1 1Ratchet Implant Driver TG 1 1Handpiece Implant Driver TG 1 1

FRIADENT® Ratchet 1 1FRIADENT® Ratchet Insert for Implant Driver 1 1

Handpiece Hex Driver 0.9 mm/short 1 1Handpiece Hex Driver 0.9 mm/long 1 1Handpiece Hex Driver 1.22 mm/short 1 1Handpiece Hex Driver 1.22 mm/long 1 1Handle for Contra-angle Hex Driver 1 1Ratchet Hex Driver 0.9 mm/short 1 1Ratchet Hex Driver 0.9 mm/long 1 1Ratchet Hex Driver 1.22 mm/short 1 1Ratchet Hex Driver 1.22 mm/long 1 1

Implant Forceps 1 1XiVE® Surgical Tray 1 1

Contents: Expert Standard Set Set

Contents: Expert Standard Set Set

Order No. Article


31

XiVE® Security Kits

The XiVE® Security Kits contain all depth stops requiredfor using the universal XiVE® Twist Drills.The kits are supplied in the XiVE® Security Tray.

26 – 1200 XiVE® Expert Security Kit (posterior/anterior)

26 – 1205 XiVE® Standard Security Kit (posterior only)

Contents: ExpertSet StandardSet

Depth Stop posterior D 2.0–D 3.0/L 8 1 1Depth Stop posterior D 2.0–D 3.0/L 9.5 1 1Depth Stop posterior D 2.0–D 3.0/L 11 1 1Depth Stop posterior D 2.0–D 3.0/L 13 1 1Depth Stop posterior D 2.0–D 3.0/L 15 1 1



Depth Stop anterior D 2.0–D 3.0/L 8 1 –Depth Stop anterior D 2.0–D 3.0/L 9.5 1 –Depth Stop anterior D 2.0–D 3.0/L 11 1 –Depth Stop anterior D 2.0–D 3.0/L 13 1 –Depth Stop anterior D 2.0–D 3.0/L 15 1 –Depth Stop anterior D 2.0–D 3.0/L 18 1 –



XiVE® Security Kit Tray 1 1

The XiVE® Depth Stops are mounted and removed from the XiVE® drillmanually, over the cutting end. No additional instruments are necessary.

26 – 8010 XiVE® Surgical Tray (empty)

26 – 1390 XiVE® Security Kit Tray (empty)

XiV

E®

Order No. Article


32

Instruments for Implant Placement

Order No. Article

XiVE® Single-patient Drills (single articles)

26 – 1015 – � D 2.0/L 8 – L 15

26 – 1025 – � D 3.0/L 8 – L 15

26 – 1035 – � D 3.4/L 8 – L 15

26 – 1045 – � D 3.8/L 8 – L 15

26 – 1055 – � D 4.5/L 8 – L 15

26 – 1065 – � D 5.5/L 8 – L 15

Article sets

The XiVE® Single-patient Drill Sets include all twist drills required for implant site preparation ofthe appropriate implant diameter.Once this diameter has been reached, the XiVE® Twist Drill crestal has to be used additionally.

XiVE® Single-patient Drill Set26 – 3025 – � D 3.0/L 8 – L 15





Drills


33

All XiVE® Twist Drills are available in one length. The drills are adjusted to thedesired implant length by using the respective XiVE® Depth Stops.The XiVE® Expert Security Kit contains one complete set of depth stops for theXiVE® posterior and anterior Twist Drills. The XiVE® Standard Security Kitincludes only the depth stops for the posterior Twist Drills (see page 31).

All XiVE® Drills are provided with internal irrigation. Please replace the cuttinginstruments after approximately 20 uses or if they are damaged or dull.

26 – 1115 XiVE® Twist Drill posterior6 D 2.0/L 8–1526 – 1118 XiVE® Twist Drill anterior6 D 2.0/L 8–18

26 – 1110 XiVE® Round Drill6

XiVE® Twist Drill posterior6

26 – 1125 – � D 3.0/L 8–1526 – 1135 – � D 3.4/L 8–1526 – 1145 – � D 3.8/L 8–1526 – 1155 – ● D 4.5/L 8–1526 – 1165 – � D 5.5/L 8–15

XiVE® Twist Drill anterior6

26 – 1128 – � D 3.0/L 8–1826 – 1138 – � D 3.4/L 8–1826 – 1148 – � D 3.8/L 8–1826 – 1158 – ● D 4.5/L 8–1826 – 1168 – � D 5.5/L 8–18

The XiVE® Twist Drills posterior andanterior are provided with markinggrooves for clear distinction:

XiVE® Twist Drill crestal6

26 – 1120 – � D 3.026 – 1130 – � D 3.426 – 1140 – � D 3.826 – 1150 – ● D 4.526 – 1160 – � D 5.5

Once the appropriate diameter has been reached, the crestal preparationleads to an internal condensation of the implant site and thus increasesprimary stability. The Twist Drill crestal always has to be used.

In type I bone, pre-tapping of the implant threads is required in the crestalarea after crestal preparation. Therefore, the XiVE® Tap (see page 35) has tobe used.

XiV

E®

Order No. Article

posterior: anterior:1 groove 2 grooves


34


Order No. Article

Drill Depth Stops

XiVE® Depth Stop posterior6

26 – 1210 – � � D 2.0 – 3.0/L 826 – 1211 – � � D 2.0 – 3.0/L 9.526 – 1212 – � � D 2.0 – 3.0/L 1126 – 1213 – � � D 2.0 – 3.0/L 1326 – 1215 – � � D 2.0 – 3.0/L 15

26 – 1230 – � � D 3.4 – 3.8/L 826 – 1231 – � � D 3.4 – 3.8/L 9.526 – 1232 – � � D 3.4 – 3.8/L 1126 – 1233 – � � D 3.4 – 3.8/L 1326 – 1235 – � � D 3.4 – 3.8/L 15

26 – 1250 – � � D 4.5 – 5.5/L 826 – 1251 – � � D 4.5 – 5.5/L 9.526 – 1252 – � � D 4.5 – 5.5/L 1126 – 1253 – � � D 4.5 – 5.5/L 1326 – 1255 – � � D 4.5 – 5.5/L 15

XiVE® Depth Stop anterior6

26 – 1310 – � � D 2.0 – 3.0/L 826 – 1311 – � � D 2.0 – 3.0/L 9.526 – 1312 – � � D 2.0 – 3.0/L 1126 – 1313 – � � D 2.0 – 3.0/L 1326 – 1315 – � � D 2.0 – 3.0/L 1526 – 1318 – � � D 2.0 – 3.0/L 18

26 – 1330 – � � D 3.4 – 3.8/L 826 – 1331 – � � D 3.4 – 3.8/L 9.526 – 1332 – � � D 3.4 – 3.8/L 1126 – 1333 – � � D 3.4 – 3.8/L 1326 – 1335 – � � D 3.4 – 3.8/L 1526 – 1338 – � � D 3.4 – 3.8/L 18

26 – 1350 – � � D 4.5 – 5.5/L 826 – 1351 – � � D 4.5 – 5.5/L 9.526 – 1352 – � � D 4.5 – 5.5/L 1126 – 1353 – � � D 4.5 – 5.5/L 1326 – 1355 – � � D 4.5 – 5.5/L 1526 – 1358 – � � D 4.5 – 5.5/L 18

The XiVE® Depth Stops posterior and anterior are also providedwith marking grooves for clear distinction.

The XiVE® Depth Stops are mounted and removed from the XiVE® Drillmanually, over the cutting end. No additional instruments are necessary.

posterior: anterior:1 groove 2 grooves


35

XiV

E

45 – 5280 FRIADENT® Drill Cleaning Instrument6

91 – 0003 FRIADENT® Drill Extension6

90 – 5042 FRIOS® Contra-angle Handpiece 20:1 Irrigation Tube

90 – 5043 Long Internal Irrigation Tube (for Drill Extension)

The drill extension must always be used with the long internal irrigation tube.

Taps

In very cortical bone, pre-tapping of the implant site is required in thecrestal area after the initial 6 mm deep preparation. The XiVE® Tap canbe used to reduce the crestal torque achieved during insertion of implants.

26 – 1180 XiVE® Tap Set4

one tap per diameter D 3.0 – D 5.5

XiVE® Tap4

26 – 1121 – � D 3.026 – 1131 – � D 3.426 – 1141 – � D 3.826 – 1151 – ● D 4.526 – 1161 – � D 5.5

The XiVE® Taps are used with the FRIADENT® Ratchet or Handpiece ImplantDriver D 3.4/TempBase.

XiV

E®

Order No. Article


36

Order No. Article


XiVE® BoneCondenser

XiVE® BoneCondenser can be used in reduced bone quality to condense thelateral and apical bone of the implant site. The improved bone quality andquantity increases implant primary stability.

All XiVE® BoneCondenser are available in one length. Depth marks at theworking tip indicate the preparation depth.

26 – 1600 � � � � � XiVE® Instrument Set BoneCondenserstraight and angled(tray with all XiVE® BoneCondensers, straight and angled)

26 – 1603 � � � � � XiVE® Instrument Set BoneCondenserstraight(tray with all XiVE® BoneCondensers, straight)

26 – 1606 � � � � � XiVE® Instrument Set BoneCondenserangled(tray with all XiVE® BoneCondensers, angled)

XiVE® BoneCondenser, straight25/6

26 – 1610 – � D 2.026 – 1620 – � D 3.026 – 1630 – � D 3.426 – 1640 – � D 3.826 – 1650 – ● D 4.526 – 1660 – � D 5.5

XiVE® BoneCondenser, angled25/6

26 – 1615 – � D 2.026 – 1625 – � D 3.026 – 1635 – � D 3.426 – 1645 – � D 3.826 – 1655 – ● D 4.526 – 1665 – � D 5.5

The angled XiVE® BoneCondenser are used when limited space is availableand for the posterior region.

26 – 1790 XiVE® BoneCondenser Tray5/6/26 (empty)

Other Instruments

26 – 1510 XiVE® Depth Gauge2 D 2.0

45 – 5709 FRIADENT® Ratchet6, without insert

45 – 5711 FRIADENT® Ratchet Insert for Implant Driver6


37

XiV

E®

Order No. Article

FRIADENT® Ratchet Implant Driver2

46 – 5810 – � posterior for implants D 3.046 – 5912 – � posterior for implants D 3.4 and TempBase46 – 5820 – � anterior for implants D 3.046 – 5922 – � anterior for implants D 3.4 and TempBase

Please use the FRIALIT® Implant Drivers 46 – 5512 and 46 – 5516(see page 18) when inserting XiVE® S Screw Implants D 3.8 – D 5.5without TempBase.

FRIADENT® Handpiece Implant Driver4

46 – 5830 – � posterior for implants D 3.046 – 5932 – � posterior for implants D 3.4 and TempBase46 – 5834 – � � � � posterior for implants D 3.8 – D 6.546 – 5840 – � anterior for implants D 3.046 – 5942 – � anterior for implants D 3.4 and TempBase46 – 5844 – � � � � anterior for implants D 3.8 – D 6.5






46 – 5710 – width 0.9 mm/short46 – 5720 – width 0.9 mm/long46 – 5711 – width 1.22 mm/short46 – 5721 – width 1.22 mm/long

FRIADENT® Handpiece Slot Driver6

46 – 5712 – blade width 2.0 mm/short46 – 5722 – blade width 2.0 mm/long

46 – 5880 FRIADENT Implant Driver Manual Long

XiVE® Trephine Drill

26 – 1129 – � D 3.0/L 8–1826 – 1139 – � D 3.4/L 8–1826 – 1149 – � D 3.8/L 8–1826 – 1159 – ● D 4.5/L 8–1826 – 1169 – � D 5.5/L 8–18


38

FRIADENT®

Prosthetics FRIADENT® Prostheticsfor FRIALIT® and XiVE® S –Universal compatibility

The FRIALIT® and XiVE® implant options cover allindications. From the top of the implant, the prostheticprocedure should be as simple as possible. Therefore,DENTSPLY Friadent provides the unique concept ofplatform technology:

Identical implant-abutment connection

Surgical versatility with unlimited prosthetic flexibility isprovided through the universal internal hex connection.A patented1 connection that has been proven over morethan10 years of clinical use2

for all prosthetic concepts.

1 Patent EP 0438 048 and US 4, 960 381, Internal Hex US Patent 5, 199 8732 Möllersten et al., Comparison of strength and failure mode of seven implant systems: An in vitro test. J Prosthet Dent 1997; 78:582-91

FRIADENT®

ProTectFRIADENT®

CoverScrew

FRIADENT®

GingivaFormer

FRIADENT®

Transfer Copingwith

TransferCap

FRIADENT®

EstheticBasestraight and angled,

Horizontal orTransverse Screw

optional

FRIALIT®

ImplantsXiVE® SImplants

FRIADENT®

EsthetiCap

ArtKat_FX_FRIADENT_3E_rev007 21.06.2007, 11:18 Uhr38

39

FRIA

DEN

T® P

rosth

etic

sfo

r FR

IALI

T® &

XiV

E® S

Implant diameters/prosthetic diameters

FRIADENT®

CERCON®

Abutment

FRIADENT®

AuroBaseFRIADENT®

TelescopicAbutment

FRIADENT®

Ball and SocketAttachment

FRIADENT®

MP CoverScrew

FRIADENT®

MP Transfer orPickUp Impression

Coping

FRIADENT®

MP Abutmentwith Bar Coping

or WaxingSleeve

D 3.0 D 3.4 D 3.8 D 4.5 D 5.5 D 6.5

FRIALIT® � � � � �

XiVE® S � � � � �

FRIADENT®

CeraBase

XiVE® TG implants:implant-abutment-

connection compatiblewith FRIADENT®

MP Abutment


40


41

FRIA

DEN

T® P

rosth

etic

sfo

r FR

IALI

T® &

XiV

E® S

At uncovery, based on the indication, you will decide whether to fabricate thesuperstructure■ from the implant level or■ from the gingival level (MP Abutment).

FRIADENT® Prosthetics

Single Crowns Bridges Overdentures

FRIADENT® AuroBase

Telescopic Abutment

Telescopic Abutment

FRIADENT® MP Abutment(Bridge) with Castable

or Cast-to WaxingSleeve

FRIADENT® MPAbutment (Bar) withGold, Titanium or

Castable Bar Coping

at implant level

pages 43 – 54

at gingival level(MP Abutment)

pages 55 – 61

Impression Making

FRIADENT® EstheticBasestraight or angled

FRIADENT®

Transfer Coping(Transfer Technique)

FRIADENT®

Transfer Coping(PickUp Technique)

FRIADENT® MPImpression Coping(Transfer technique)

FRIADENT® MPImpression Coping(PickUp Technique)

FRIADENT® EstheticBasestraight or angled

FRIADENT® MP Abutment

FRIADENT® Attachment

FRIADENT® FRIADENT®

CERCON® CeraBaseCeramic Abutments


42

Uncovery

Soft Tissue Punches

FRIADENT® Tissue Punch6

45 – 5665 – � D 3.045 – 5666 – � D 3.445 – 5660 – � D 3.845 – 5661 – ● D 4.545 – 5662 – � D 5.545 – 5663 – � D 6.5

BoneProfiler

In case of implants placed subcrestally, new bone can grow over the implantduring the healing phase. With the FRIALIT® BoneProfiler, this bone can beremoved and the Cover Screw uncovered. The geometry of the FRIALIT®

BoneProfiler exactly matches that of the Gingiva Former.

FRIADENT® BoneProfiler6

45 – 5338 – � D 3.445 – 5348 – � D 3.845 – 5358 – ● D 4.545 – 5368 – � D 5.545 – 5378 – � D 6.5

45 – 5300 FRIADENT® Guide Pin for BoneProfiler

45 – 5550 FRIADENT® Soft Tissue Gauge6

Order No. Article


43

FRIA

DEN

T® P

rosth

etic

sfo

r FR

IALI

T® &

XiV

E® S

Gingiva Formers

FRIADENT® Gingiva Former2

45 – 1421 – � D 3.0/GH 145 – 1422 – � D 3.0/GH 245 – 1423 – � D 3.0/GH 345 – 1425 – � D 3.0/GH 5

45 – 1431 – � D 3.4/GH 145 – 1432 – � D 3.4/GH 245 – 1433 – � D 3.4/GH 345 – 1435 – � D 3.4/GH 5

45 – 1441 – � D 3.8/GH 145 – 1442 – � D 3.8/GH 245 – 1443 – � D 3.8/GH 345 – 1445 – � D 3.8/GH 5

45 – 1451 – ● D 4.5/GH 145 – 1452 – ● D 4.5/GH 245 – 1453 – ● D 4.5/GH 345 – 1455 – ● D 4.5/GH 5

45 – 1461 – � D 5.5/GH 145 – 1462 – � D 5.5/GH 245 – 1463 – � D 5.5/GH 345 – 1465 – � D 5.5/GH 5

The gingiva formers are threaded in with the 0.9 mm FRIADENT Hex Driveror with the blade width 2.0 mm FRIADENT® Slot Screwdriver (see page 64).

Prosthetic fabrication at implant level:

Soft tissue management,provisional restorations

Order No. Article

GH 1

2 mm

3 mm

5 mm

1 mm

GH 2

GH 3

GH 5

Please note:� D 3.0 components (bronze) can only be used for XiVE®.FRIALIT® implants � D 6.5 (green) are restored with � D 5.5 abutments.


44

FRIADENT® Gingiva Former2 Slim

45 – 1232 – � D 3.4/GH 245 – 1233 – � D 3.4/GH 345 – 1235 – � D 3.4/GH 5

45 – 1242 – � D 3.8/GH 245 – 1243 – � D 3.8/GH 345 – 1245 – � D 3.8/GH 5

45 – 1252 – ● D 4.5/GH 245 – 1253 – ● D 4.5/GH 345 – 1255 – ● D 4.5/GH 5

With the FRIADENT® Gingiva Former Slim a perfect contouring of the softtissue can be achieved in cases with limited mesio-distal space. For makingimpressions, the FRIADENT® Transfer Coping Slim (see page 47) is used.

FRIADENT® Gingiva Former2 Loop

45 – 1333 – � D 3.4/GH 345 – 1335 – � D 3.4/GH 5

45 – 1343 – � D 3.8/GH 345 – 1345 – � D 3.8/GH 5

45 – 1353 – ● D 4.5/GH 345 – 1355 – ● D 4.5/GH 5

45 – 1363 – � D 5.5/GH 345 – 1365 – � D 5.5/GH 5

The FRIADENT® Gingiva Former Loop allows easy securing of suturematerial, thus enabling simple and safe soft tissue surgery.

Order No. Article


Soft tissue management,provisional restorations


45

FRIA

DEN

T® P

rosth

etic

sfo

r FR

IALI

T® &

XiV

E® S

Order No. Article

FRIADENT® EsthetiCapwith Screw for EsthetiCap

46 – 1730 – � D 3.4/oval

46 – 1740 – � D 3.8/oval46 – 1745 – � D 3.8/triangular

46 – 1750 – ● D 4.5/oval46 – 1755 – ● D 4.5/triangular

46 – 1760 – � D 5.5/oval46 – 1765 – � D 5.5/triangular

As anatomical gingiva formers, the FRIADENT® EsthetiCap abutments provideperfect anatomical and esthetic peri-implant gingival contours by simplecustomization.

Provisional Restorations

FRIADENT® ProTect Abutment24

with PickUp Guide Pin4

45 – 1530 – � D 3.445 – 1540 – � D 3.845 – 1550 – ● D 4.545 – 1560 – � D 5.5

The PickUp Guide Pin ensures optimum stability for the provisionalabutment.



46


Impressions

FRIADENT® Lab Set Transfer ImpressionThe Lab Set Transfer Impression contains Transfer Coping,FRIADENT® TransferCap (D 3.0 – D 5.5), Standard AbutmentScrew (D 3.0 with Abutment Screw D 3.0) and Implant Analog

46 – 8123 – � D 3.0/GH 346 – 8125 – � D 3.0/GH 5

46 – 8133 – � D 3.4/GH 346 – 8135 – � D 3.4/GH 5

46 – 8143 – � D 3.8/GH 346 – 8145 – � D 3.8/GH 5

46 – 8153 – ● D 4.5/GH 346 – 8155 – ● D 4.5/GH 5

46 – 8163 – � D 5.5/GH 346 – 8165 – � D 5.5/GH 5

FRIADENT® Lab Set PickUp ImpressionThe Lab Set PickUp Impression contains Transfer Coping,FRIADENT® TransferCap (D 3.0 – D 5.5), Standard AbutmentScrew (D 3.0 with Abutment Screw D 3.0) and Implant Analog

46 – 8223 – � D 3.0/GH 346 – 8225 – � D 3.0/GH 5

46 – 8233 – � D 3.4/GH 346 – 8235 – � D 3.4/GH 5

46 – 8243 – � D 3.8/GH 346 – 8245 – � D 3.8/GH 5

46 – 8253 – ● D 4.5/GH 346 – 8255 – ● D 4.5/GH 5

46 – 8263 – � D 5.5/GH 346 – 8265 – � D 5.5/GH 5

The Transfer Coping GH 3 is used forgingiva up to 3 mm thick. Please use theTransfer Coping GH 5 for gingiva exceeding3 mm thickness.

Order No. Article

GH 3 GH 5

5 mm3 mm


47

FRIA

DEN

T® P

rosth

etic

sfo

r FR

IALI

T® &

XiV

E® S

FRIADENT® Transfer Coping (Transfer Technique)with Standard Abutment Screw4 (D 3.0 withAbutment Screw4 D 3.0) and TransferCap20 (D 3.0 – D 5.5)

45 – 1620 – � D 3.0/GH 3 4

45 – 1621 – � D 3.0/GH 5 4

45 – 1630 – � D 3.4/GH 3 4

45 – 1631 – � D 3.4/GH 5 4

45 – 1640 – � D 3.8/GH 3 2

45 – 1641 – � D 3.8/GH 5 2

45 – 1650 – ● D 4.5/GH 3 2

45 – 1651 – ● D 4.5/GH 5 2

45 – 1660 – � D 5.5/GH 3 2

45 – 1661 – � D 5.5/GH 5 2

FRIADENT® Transfer Coping (PickUp Technique)with PickUp Guide Pin4 (D 3.0 with PickUpGuide Pin4 D 3.0) and TransferCap20 (D 3.0 – D 5.5)

45 – 1625 – � D 3.0/GH 3 4

45 – 1622 – � D 3.0/GH 5 4

45 – 1635 – � D 3.4/GH 3 4

45 – 1632 – � D 3.4/GH 5 4

45 – 1645 – � D 3.8/GH 3 2

45 – 1642 – � D 3.8/GH 5 2

45 – 1655 – ● D 4.5/GH 3 2

45 – 1652 – ● D 4.5/GH 5 2

45 – 1665 – � D 5.5/GH 3 2

45 – 1662 – � D 5.5/GH 5 2

FRIADENT® Transfer Coping Slim2

45 – 1239 – � D 3.445 – 1249 – � D 3.845 – 1259 – ● D 4.5

The FRIADENT® Transfer Coping Slim is used if – in cases with limited mesio-distal space – the contouring of the soft tissue has been made with theGingiva Former Slim (see page 44).

Order No. Article


48


Impressions

FRIADENT® Transfer Coping Basic2

46 – 1632 – � D 3.446 – 1642 – � D 3.846 – 1652 – ● D 4.546 – 1662 – � D 5.5

The FRIADENT® Transfer Coping Basic is used for simple impression making incases with implant divergencies.

46 – 4304 � FRIADENT® Standard Abutment Screw 4 D 3.045 – 4305 � � � � FRIADENT® Standard Abutment Screw4

46 – 1605 � FRIADENT® PickUp Guide Pin4 D 3.045 – 1615 � � � � FRIADENT® PickUp Guide Pin4

Abutment screws and guide pins are seated with the 0.9 mmFRIADENT® Hex Driver or with the blade width 2.0 mm FRIADENT®

Slot Screwdriver (see page 70).

TransferCaps

FRIADENT® TransferCaps allow for greater precision during impression so thatthe implant inner geometry is transferred with even greater accuracy.The result is the best possible superstructure fit.FRIADENT® TransferCaps are not available for diameter D 6.5.

FRIADENT® Multi-Pack TransferCap20

(3 pieces)

45 – 1629 – � D 3.045 – 1639 – � D 3.445 – 1649 – � D 3.845 – 1659 – ● D 4.545 – 1669 – � D 5.5

Order No. Article



49

FRIA

DEN

T® P

rosth

etic

sfo

r FR

IALI

T® &

XiV

E® S

FRIADENT® Implant Analog5

45 – 4020 – � D 3.045 – 4030 – � D 3.445 – 4040 – � D 3.845 – 4050 – ● D 4.545 – 4060 – � D 5.545 – 4070 – � D 6.5

Try-in Abutments

Gingival height, angle and the correct position of the horizontal screw (GH 2)for FRIADENT® abutments can easily and quickly be determined with theFRIADENT® Select Try-in Abutments.

FRIADENT® Select Try-in Abutment2

45 – 2119 – � D 3.0/A 0 (straight)45 – 2120 – � D 3.4/A 0 (straight)45 – 2121 – � D 3.8/A 0 (straight)45 – 2122 – � D 4.5/A 0 (straight)45 – 2123 – � D 5.5/A 0 (straight)45 – 2219 – � D 3.0/A 15 (angled 15°)45 – 2220 – � D 3.4/A 15 (angled 15°)45 – 2221 – � D 3.8/A 15 (angled 15°)

FRIADENT® Select Try-in Abutment Multi-Pack2 (3 pieces)

45 – 2193 – � D 3.4/A 0 (straight, 3 pieces)45 – 2194 – � D 3.8/A 0 (straight, 3 pieces)45 – 2195 – � D 4.5/A 0 (straight, 3 pieces)45 – 2196 – � D 5.5/A 0 (straight, 3 pieces)45 – 2293 – � D 3.4/A 15 (angled, 3 pieces)45 – 2294 – � D 3.8/A 15 (angled, 3 pieces)

Prosthetic fabrication from the implant level:

Prosthetics/laboratory

Order No. Article


50

EstheticBase Abutments

FRIADENT® EstheticBase straight / A 0Screw for EstheticBase4 (D 3.0 with Abutment Screw4 D 3.0)

46 – 2121 – � D 3.0/GH 1 4

46 – 2122 – � D 3.0/GH 2 4

46 – 2123 – � D 3.0/GH 3 4

46 – 2125 – � D 3.0/GH 5 4

46 – 2131 – � D 3.4/GH 1 4

46 – 2132 – � D 3.4/GH 2 4

46 – 2133 – � D 3.4/GH 3 4

46 – 2135 – � D 3.4/GH 5 4

46 – 2141 – � D 3.8/GH 1 2

46 – 2142 – � D 3.8/GH 2 2

46 – 2143 – � D 3.8/GH 3 2

46 – 2145 – � D 3.8/GH 5 2

46 – 2151 – ● D 4.5/GH 1 2

46 – 2152 – ● D 4,5/GH 2 2

46 – 2153 – ● D 4.5/GH 3 2

46 – 2155 – ● D 4.5/GH 5 2

46 – 2161 – � D 5.5/GH 1 2

46 – 2162 – � D 5.5/GH 2 2

46 – 2163 – � D 5.5/GH 3 2

46 – 2165 – � D 5.5/GH 5 2

All FRIADENT® EstheticBase Abutments are provided with a horizontal thread(M 1.4).An additional horizontal or transverse screw set is necessary for horizontallyscrew-retained crowns (see page 52).

We recommend the use of special titanium drills (Gebr. Brasseler, Lemgo orJota Düsseldorf) for preparing the abutments.

Abutment screws

46 – 4304 � FRIADENT® Standard Abutment Screw4 D 3,0

46 – 4305 � � � � FRIADENT® Screw4 for EstheticBase

Abutments for single tooth restorations and bridges



Order No. Article

GH 11 mm

GH 22 mm

GH 33 mm

GH 55 mm



51

FRIA

DEN

T® P

rosth

etic

sfo

r FR

IALI

T® &

XiV

E® S

FRIADENT® EstheticBase angled / A 15Screw for EstheticBase4 (D 3.0 with Abutment Screw4 D 3.0)

46 – 2221 – � D 3.0/GH 1 4

46 – 2222 – � D 3.0/GH 2 4

46 – 2223 – � D 3.0/GH 3 4

46 – 2225 – � D 3.0/GH 5 4

46 – 2231 – � D 3.4/GH 1 4

46 – 2232 – � D 3.4/GH 2 4

46 – 2233 – � D 3.4/GH 3 4

46 – 2235 – � D 3.4/GH 5 4

46 – 2241 – � D 3.8/GH 1 2

46 – 2242 – � D 3.8/GH 2 2

46 – 2243 – � D 3.8/GH 3 2

46 – 2245 – � D 3.8/GH 5 2

46 – 2251 – ● D 4.5/GH 1 2

46 – 2252 – ● D 4.5/GH 2 2

46 – 2253 – ● D 4.5/GH 3 2

46 – 2255 – ● D 4.5/GH 5 2

46 – 2261 – � D 5.5/GH 1 2

46 – 2262 – � D 5.5/GH 2 2

46 – 2263 – � D 5.5/GH 3 2

46 – 2265 – � D 5.5/GH 5 2

Horizontal screws

46 – 4403 FRIADENT® Horizontal Screw Set Standardwith Horizontal Screw Standard4 and Horizontal Screw Seat8

46 – 4404 FRIADENT® Horizontal Screw Set Longwith Horizontal Screw Long4 and Horizontal Screw Seat8

46 – 4407 FRIADENT® Transverse Screw Set Standardwith Transversal Screw Standard4 and Horizontal Screw Seat8

46 – 4408 FRIADENT® Transverse Screw Set Longwith Transversal Screw Long4 and Horizontal Screw Seat8

46 – 4401 FRIADENT® Horizontal Screw Standard4

46 – 4402 FRIADENT® Horizontal Screw Long4

46 – 4405 FRIADENT® Transverse Screw Standard4

46 – 4406 FRIADENT® Transverse Screw Long4

45 – 4410 FRIADENT® Horizontal Screw Seat8

Horizontal screws are seated in with the 0.9 mm FRIADENT® Hex Driver(see page 64). Particularly for molars, the use of the Horizontal Screw Setwith a long head is recommended, as the crown usually requires broaderbuccal-lingual width.

Order No. Article


52

Ceramic Abutments

FRIADENT® CERCON® Abutment32 straight / A 0with Screw

47 – 1141 – � D 3.8/GH1, neutral47 – 2141 – � D 3.8/GH1, dentin47 – 1151 – ● D 4.5/GH1, neutral47 – 2151 – ● D 4.5/GH1, dentin


FRIADENT® CERCON® Abutment32 angled / A 15with Screw



We recommend using the ceramic-line Shaping Set of DeguDent forprepping the FRIADENT® CERCON® Abutments. The grinding process of theCERCON® Abutments requires irrigation.Please note that the indication is restricted to the front tooth region.

FRIADENT® CeraBase Abutmentwith Standard Abutment Screw4,

45 – 2530 – � D 3.4 conical 30/4

45 – 2531 – � D 3.4 anatomical30/4

45 – 2540 – � D 3.8 conical 30/3

45 – 2541 – � D 3.8 anatomical30/3

45 – 2550 – ● D 4.5 conical 30/3

45 – 2551 – ● D 4.5 anatomical30/3

45 – 2560 – � D 5.5 conical 30/3

45 – 2561 – � D 5.5 anatomical30/3

We recommend using the FRIADENT® CeraBase Tool Set for prepping theceramic sleeve of the FRIADENT® CeraBase Abutment (see page 65).The grinding process does not require irrigation.

Abutments for single tooth restorations and bridges



Order No. Article


53

FRIA

DEN

T® P

rosth

etic

sfo

r FR

IALI

T® &

XiV

E® S

Cast-to Abutments

FRIADENT® AuroBase20/8 Abutmentwith Standard Abutment Screw4

(D 3.0 with Abutment Screw4 D 3.0)

45 – 2420 – � D 3.045 – 2430 – � D 3.445 – 2440 – � D 3.845 – 2450 – ● D 4.545 – 2460 – � D 5.5

Telescopic Abutments

FRIADENT® Telescopic Abutmentwith Standard Abutment Screw4

(D 3.0 with Abutment Screw4 D 3.0)

45 – 2620 – � D 3.0 4

45 – 2630 – � D 3.4 4

45 – 2640 – � D 3.8 2

45 – 2650 – ● D 4.5 2

45 – 2660 – � D 5.5 2

The Telescopic Abutment can also be used as a custom abutment for singlecrowns.The Telescopic Abutment can be veneered with titanium ceramics (e.g.,Duceratin, Ducera or Vita Titankeramik, Vita Zahnfabrik) for occlusallyscrew-retained single crowns.

Abutment screws

46 – 4304 � FRIADENT® Standard Abutment Screw4 D 3.0

46 – 4305 � � � � FRIADENT® Screw4 for EstheticBase

Milling Implants

FRIADENT® Milling Implant6

45 – 2621 – � D 3.045 – 2631 – � D 3.445 – 2641 – � D 3.845 – 2651 – ● D 4.545 – 2661 – � D 5.5

Order No. Article


54

Attachments

FRIADENT® Ball and Socket AttachmentInsert2, Attachment Screw2, Socket9 (gold alloy),with blue silicone ring and white plastic ring

45 – 3131 – � D 3.4/GH 1 4

45 – 3132 – � D 3.4/GH 2 4

45 – 3133 – � D 3.4/GH 3 4

45 – 3141 – � D 3.8/GH 1 2

45 – 3142 – � D 3.8/GH 2 2

45 – 3143 – � D 3.8/GH 3 2

45 – 3145 – � D 3.8/GH 5 2

45 – 3151 – ● D 4.5/GH 1 2

45 – 3152 – ● D 4.5/GH 2 2

45 – 3153 – ● D 4.5/GH 3 2

45 – 3155 – ● D 4.5/GH 5 2

45 – 3161 – � D 5.5/GH 1 2

45 – 3162 – � D 5.5/GH 2 2

45 – 3163 – � D 5.5/GH 3 2

45 – 3165 – � D 5.5/GH 5 2

The gingival collar section of the FRIADENT® Ball and Socket Attachment ispositioned using the FRIADENT® Seating Instrument for Attachment Insert andMP Insert.

The Attachment Screw is seated in the implant using the 1.22 mmFRIADENT® Hex Driver (see page 70).

45 – 3200 � � � � FRIADENT® Attachment Matrix9

45 – 4105 � � � � FRIADENT® Attachment Patrix Analog universal



Order No. Article

The FRIADENT® Attachment Patrix Analog is used to repair and relineoverdentures. The Analog is snapped into the socket in the denture base afterreline impressions are made. One Patrix Analog is used for all diameters.


55

FRIA

DEN

T® P

rosth

etic

sfo

r FR

IALI

T® &

XiV

E® S

FRIADENT® MP Abutment2

MP Abutment Insert and MP Insert Screw

46 – 2831 – � D 3.4/GH 146 – 2832 – � D 3.4/GH 246 – 2833 – � D 3.4/GH 346 – 2835 – � D 3.4/GH 5

46 – 2841 – � D 3.8/GH 146 – 2842 – � D 3.8/GH 246 – 2843 – � D 3.8/GH 346 – 2845 – � D 3.8/GH 546 – 2849 – � D 3.8/GH 9

46 – 2851 – ● D 4.5/GH 146 – 2852 – ● D 4.5/GH 246 – 2853 – ● D 4.5/GH 346 – 2855 – ● D 4.5/GH 546 – 2859 – ● D 4.5/GH 9

46 – 2861 – � D 5.5/GH 146 – 2862 – � D 5.5/GH 246 – 2863 – � D 5.5/GH 346 – 2865 – � D 5.5/GH 5

The appropriate MP Abutment Insert is selected according to the gingivalheight. The number of the grooves on the screw head indicates thegingival height of the matching MP Abutment Insert.

GH 1 = 1 ring GH 3 = 3 ringsGH 2 = 2 rings GH 5 = 5 rings

The MP Abutment Inserts are mounted on the implants with the SeatingInstrument for Attachment Insert and MP Insert.

The MP Abutment Screw is tightened with the MP Abutment Screw Driverfor ratchet or handpiece (see page 65).

Prosthetic fabrication at gingival level (MP Abutment):

Transgingival extension,temporary sealing

Order No. Article


56

FRIADENT® MP Cover Screw2

46 – 1430 – � D 3.446 – 1440 – � D 3.846 – 1450 – ● D 4.546 – 1460 – � D 5.5

Order No. Article


Transgingival extension,temporary sealing



57

FRIA

DEN

T® P

rosth

etic

sfo

r FR

IALI

T® &

XiV

E® S


Impressions

Order No. Article

FRIADENT® MP Lab Set Transfer ImpressionContent: MP Transfer Impression Coping,MP Analog

46 – 8130 – � D 3.446 – 8140 – � D 3.846 – 8150 – ● D 4.546 – 8160 – � D 5.5

FRIADENT® MP Lab Set PickUp ImpressionContent: MP PickUp Impression Coping,MP PickUp Guide Pin, MP Analog

46 – 8230 – � D 3.446 – 8240 – � D 3.846 – 8250 – ● D 4.546 – 8260 – � D 5.5

FRIADENT® MP Transfer Impression Coping2

46 – 1635 – � D 3.446 – 1645 – � D 3.846 – 1655 – ● D 4.546 – 1665 – � D 5.5

FRIADENT® MP PickUp Impression Coping2

46 – 1630 – � D 3.446 – 1640 – � D 3.846 – 1650 – ● D 4.546 – 1660 – � D 5.5

46 – 1615 � � ● � FRIADENT® MP PickUp Guide Pin4

We recommend securing the MP PickUp Guide Pin with the width 1.22 mmFRIADENT® Hex Driver (see page 70).

FRIADENT® MP Analog5

46 – 4030 – � D 3.446 – 4040 – � D 3.846 – 4050 – ● D 4.546 – 4060 – � D 5.5


58



FRIADENT® MP Lab Set Bridgewith Castable Waxing SleeveContent: Castable Waxing Sleeve,MP Screw for Waxing Sleeve

46 – 9530 – � D 3.446 – 9540 – � D 3.846 – 9550 – ● D 4.546 – 9560 – � D 5.5

FRIADENT® MP Lab Set Bridgewith Cast-to Waxing SleeveContent: Cast-to Waxing Sleeve,MP Screw for Waxing Sleeve

46 – 9930 – � D 3.446 – 9940 – � D 3.846 – 9950 – ● D 4.546 – 9960 – � D 5.5

Bridges

Order No. Article



59

FRIA

DEN

T® P

rosth

etic

sfo

r FR

IALI

T® &

XiV

E® S

Waxing Sleeves

FRIADENT® Castable Waxing Sleeve21

45 – 4330 – � D 3.445 – 4340 – � D 3.845 – 4350 – ● D 4.545 – 4360 – � D 5.5

FRIADENT® Cast-to Waxing Sleeve21/8

45 – 4630 – � D 3.445 – 4640 – � D 3.845 – 4650 – ● D 4.545 – 4660 – � D 5.5

Castable Waxing Sleeve: Prior to bridge delivery, smooth the contactsurface between crown and abutment and the screw and screw seat usingthe FRIADENT® Finishers (see page 65).

Cast-to Waxing Sleeve: Smoothing with finishers is not necessary.

46 – 4300 � � � � FRIADENT® MP Screw for Castable Waxing Sleeve4

We recommend using the 1.22 mm FRIADENT® Hex Driver (see page 64)when seating the Screw for the Waxing Sleeve.

Soldering Analogs

45 – 4102 � � � � FRIADENT® Lab Set Soldering Analog for BridgeFRIADENT® Soldering Analog, universal andSoldering Screw for Bridge

45 – 4103 � � � � FRIADENT® Soldering Analog6, universal

45 – 4207 � � � � FRIADENT® Soldering Screw for Bridge4

Order No. Article


60


Prosthetics/laboratoryBars

FRIADENT® MP Lab Set Gold Bar CopingContent: Gold Bar Coping9, MP Screw for Bar Coping

46 – 9630 – � D 3.446 – 9640 – � D 3.846 – 9650 – ● D 4.546 – 9660 – � D 5.5

FRIADENT® MP Lab Set Titanium Bar CopingContent: Titanium Bar Coping, MP Screw for Bar Coping

46 – 9637 – � D 3.446 – 9647 – � D 3.846 – 9657 – ● D 4.546 – 9667 – � D 5.5

FRIADENT® MP Lab Set Castable Bar CopingContent: Castable Bar Coping, MP Screw for Bar Coping

46 – 9638 – � D 3.446 – 9648 – � D 3.846 – 9658 – ● D 4.546 – 9668 – � D 5.5

Bar Copings

FRIADENT® Gold Bar Coping9

(without screw), for soldering

45 – 4230 – � D 3.445 – 4240 – � D 3.845 – 4250 – ● D 4.545 – 4260 – � D 5.5

FRIADENT® Titanium Bar Coping2

(without screw)

45 – 4231 – � D 3.445 – 4241 – � D 3.845 – 4251 – ● D 4.545 – 4261 – � D 5.5

Order No. Article


61

FRIA

DEN

T® P

rosth

etic

sfo

r FR

IALI

T® &

XiV

E® S

FRIADENT® Castable Bar Coping21

(without screw)

45 – 4530 – � D 3.445 – 4540 – � D 3.845 – 4550 – ● D 4.545 – 4560 – � D 5.5

46 – 4200 FRIADENT® MP Coping Screw4

We recommend using the 1.22 mm FRIADENT® Hex Driver when seatingMP Coping Screw (see page 64).

Accessories

45 – 4210 FRIADENT® Gold Bar round9

50 mm length

45 – 4215 FRIADENT® Gold Bar Clip9

50 mm length

45 – 4212 FRIADENT® Titanium Bar round2

50 mm length

Soldering Analogs

45 – 4101 � � � � FRIADENT® Lab Set Soldering Analog for BarFRIADENT® Soldering Analog, universal andSoldering Screw for Bar

45 – 4103 � � � � FRIADENT® Soldering Analog6, universal

45 – 4206 � � � � FRIADENT® Soldering Screw for Bar4

Order No. Article


62

Instrument setsimpression/prosthetics

46 – 7000 FRIADENT® Prosthetic Set Mini

The Prosthetic Set Mini includes all instruments needed forthe prosthetic delivery of implant restorations.

Content:

FRIADENT® RatchetRatchet Hex Driver 0.9 mm/shortRatchet Hex Driver 1.22 mm/short

45 – 8111 FRIALIT® Basic Set Prosthetics

The set includes all clinical instruments necessary forimpression making and prosthetics. The instrumentsare supplied in the FRIALIT® Prosthetic Tray.

Content:

FRIADENT® Ratchet

Handpiece Hex Driver 0.9 mmHandpiece Hex Driver 1.22 mmRatchet Hex Driver 0.9 mm/shortRatchet Hex Driver 1.22 mm/shortRatchet Hex Driver 1.22 mm/longRatchet Slot Screwdriver 2.0 mm/longSeating Instrument for Transfer Coping and MH-6 Abutment/A 0Seating Instrument for Attachment Insert and MP InsertHandpiece Seating Instrument for MP Insert ScrewRatchet Seating Instrument for MP Insert Screw

48 – 0030 FRIALIT® Prosthetic Tray(empty)

Order No. Article


63

FRIA

DEN

T® P

rosth

etic

sfo

r FR

IALI

T® &

XiV

E® S

26 – 8020 XiVE® Prosthetic Tray

The set includes all clinical instruments necessary forimpression making and prosthetics. The instrumentsare supplied in the XiVE® Prosthetic Tray.

Content:

FRIADENT® Ratchet

Handpiece Hex Driver 0.9 mm/shortHandpiece Hex Driver 0.9 mm/longHandpiece Hex Driver 1.22 mm/shortHandpiece Hex Driver 1.22 mm/longHandle for Handpiece Hex Driver

Ratchet Hex Driver 0.9 mm/shortRatchet Hex Driver 0.9 mm/longRatchet Hex Driver 1.22 mm/shortRatchet Hex Driver 1.22 mm/long

Seating Instrument for Attachment Insert and MP InsertHandpiece Seating Instrument for MP Insert ScrewRatchet Seating Instrument for MP Insert Screw

Insertion Tool EstheticBase

FRIADENT® Select Try-in Abutment D 3.0/A 0FRIADENT® Select Try-in Abutment D 3.4/A 0FRIADENT® Select Try-in Abutment D 3.8/A 0FRIADENT® Select Try-in Abutment D 4.5/A 0FRIADENT® Select Try-in Abutment D 5.5/A 0FRIADENT® Select Try-in Abutment D 3.0/A 15FRIADENT® Select Try-in Abutment D 3.4/A 15FRIADENT® Select Try-in Abutment D 3.8/A 15

26 – 8025 XiVE® Prosthetic Tray(empty)

Order No. Article


64

Instruments for impression/prosthetics/laboratory








FRIADENT® Handpiece Slot Screwdriver6

46 – 5712 – blade width 2.0 mm/short46 – 5722 – blade width 2.0 mm/long

46 – 5750 FRIADENT® Handle for Handpiece Hex Driver6

This handle fits all handpiece drivers.

FRIADENT® Hex Driver6

without torque limit45 – 5650 – width 0.9 mm

The 0.9 mm FRIADENT® Hex Driver without torque limit is recommended forregions with limited access.

Order No. Article


65

FRIA

DEN

T® P

rosth

etic

sfo

r FR

IALI

T® &

XiV

E® S

45 – 5605 FRIADENT® Seating Instrument for Transfer Coping andMH-6 Abutment /A 0

45 – 5702 FRIADENT® Finisher6/10 for Horizontal Screw Seat

45 – 5600 FRIADENT® Hermetics Basic Set(Seating Instrument, 20 Hermetics Sealing Rings)

45 – 5601 FRIADENT® Hermetics Seating Instrument2

45 – 5750 FRIADENT® CeraBase Tool SetContents: Medium Diamond Drill, Fine Diamond Drill,Rubber Polishing Wheel

45 – 5753 FRIADENT® CeraBase Medium Diamond Drill

45 – 5755 FRIADENT® CeraBase Fine Diamond Drill

45 – 5758 FRIADENT® CeraBase Rubber Polishing Wheels (5 pieces)

45 – 5617 FRIADENT® Seating Instrument2

for Attachment Insert and MP Insert

46 – 5610 FRIADENT® Ratchet Seating Instrument6

for MP Insert Screw

46 – 5615 FRIADENT® Handpiece Seating Instrumentfor MP Insert Screw

45 – 5621 FRIADENT® Activator6 for Ball and Socket Attachment

45 – 5622 FRIADENT® Deactivator6 for Ball and Socket Attachment

45 – 5623 FRIADENT® Bar Clip Activator6

FRIADENT® Finisher6/10 for Abutment Seatfor screw-retained superstructures

45 – 5705 – � � � D 3.4 – D 4.545 – 5707 – � D 5.5

45 – 5700 FRIADENT® Finisher6/10 for Screw Head Seatfor screw-retained superstructures

Order No. Article


66

XiVE® TGXiVE® TG plus –the transgingival alternative

If function is the first priority, then the single-componenttransgingival XiVE® TG plus implant is recommended.As a leader in innovation, DENTSPLY Friadent accepts theobligation to apply new scientific insights to the develop-ment of existing and new implant systems.XiVE® TG plus is the result of the scientific and clinicalexperience accumulated with the New Ledermann Screwand FRIALOC® systems.With the implant-abutment connection and the machinedimplant collar extending through the soft tissue, thetransgingival implant looks like a XiVE® S plusimplant with an integrated MP abutment.

ArtKat_FX_XiVETG_4E_rev007 21.06.2007, 13:19 Uhr66

67

Indications

Cases:■ where a transgingival implant design is indicated■ when temporary and definitive components are needed

for simple and fast prosthetic restoration■ requiring increased primary stability for early or

immediate implant function■ with atrophied ridges where augmentation is not

desired or indicated, multiple implant restorations inposterior regions

■ where a cylindrical implant design is advantageous –particularly in the lateral region

■ where the local bone must be used to the maximumpossible extent: implant lengths available range from8 to 18 mm

Macro-design

The cylinder-shaped design for internal condensation ofthe peri-implant bone prevents trauma and increasesprimary stability of implants, even in spongy bone.

Micro-design

The innovative thread design of XiVE® screw implantscombined with the bone-class-specific preparation of theimplant site provides torque stabilization in all bonequalities.

Nano-design

Growth-activating FRIADENT® plus surface. TransgingivalScrew implant with trimodal surface morphologyproviding an ideal environment for functional adaptationof epithelium, connective tissue and bone.

Implant diameterX

iVE®

TG

D 3.4 D 3.8 D 4.5

XiVE® TG � � �

The XiVE® TG product range is a further development ofthe FRIALOC® implant system. All XiVE® TG componentsand instruments (except the drills) are fully compatiblewith FRIALOC®.Previously placed FRIALOC® implants can still be restoredwith components of the XiVE® TG prosthetic line.


68

Implant placement

2. Place the XiVE® TGRatchet or HandpieceImplant Driver onto theAdapter Screw.

3. Remove the implantwithout touching the innervial.

4. Remove the ImplantHolder.

5. Place XiVE® TG plusScrew Implant. Pleasefollow the instructions foruse.

XiVE® TG sterile packaging for implants

All FRIADENT® Screw Implants are packed in gammasterilized, transparent double vials. The color-coded capis sealed with an adhesive label.





No-touch insertion XiVE® TG plusTransgingival Screw Implant

1. Remove the outer vial cap (non-sterile) and drop thesterile inner vial onto the surgical tray.


product sterility.


69

For the pre-surgical planning of XiVE®TG plus, the same components asfor XiVE®S Screw Implants are used (see pages 22/23).

Implants (sterile)

XiVE® TG plusTransgingival Screw ImplantScrew Implant3, Adapter Screw

25 – 1431 – � D 3.4/L 9.525 – 1432 – � D 3.4/L 1125 – 1433 – � D 3.4/L 1325 – 1435 – � D 3.4/L 1525 – 1438 – � D 3.4/L 18

25 – 1440 – � D 3.8/L 825 – 1441 – � D 3.8/L 9.525 – 1442 – � D 3.8/L 1125 – 1443 – � D 3.8/L 1325 – 1445 – � D 3.8/L 1525 – 1448 – � D 3.8/L 18

25 – 1450 – � D 4.5/L 825 – 1451 – � D 4.5/L 9.525 – 1452 – � D 4.5/L 1125 – 1453 – � D 4.5/L 1325 – 1455 – � D 4.5/L 1525 – 1458 – � D 4.5/L 18

An Adapter Screw is pre-mounted on XiVE® TG plus Screw Implantsto secure the Implant Driver.

Use the XiVE® TG Ratchet or Handpiece Implant Driver (see page 76)to thread in the XiVE® TG Implants.After rotating in the implant, the Adapter Screw is removed with the0.9 mm FRIADENT® Hex Driver.

25 – 9200 XiVE® TG Clinical Set Cover Screw(Four Cover Screws)

25 – 1400 � � � XiVE® TG Cover Screw for Implants2

The Cover Screws are placed with the 0.9 mm FRIADENT® Hex Driver.

Order No. Article

XiV

E® T

G


70

Instruments

XiVE® Instrument Sets Surgery

The XiVE® Instrument Sets Surgery contain the instrumentsrequired for implant placement (see page 30).The kits are supplied in the XiVE® Surgical Tray.

26 – 8000 XiVE® ExpertSet Surgery5/6/26

26 – 8005 XiVE® StandardSet Surgery5/6/26

Drills and drill sequence for transgingival XiVE® TG Implants are identicalto those of subgingival XiVE® S Implants (see page 28/29).XiVE® BoneCondenser may also be used (see page 35).

Other Instruments

25 – 5206 XiVE® TG Radiographic Template (transgingival)


25 – 5600 XiVE® TG Ratchet Implant Driver6

25 – 5601 XiVE® TG Handpiece Implant Driver6

FRIADENT Ratchet Hex Driver6


FRIADENT Handpiece Hex Driver6


Order No. Article


71

Single Crowns Bridges Overdentures

XiVE® TG AuroBase

XiVE® TGGold, Titanium or

Castable Bar Coping

Impressions

XiVE® TG Abutmentstraight orangled 15°

XiVE® TG WaxingSleeves

XiVE® TGTransfer Impression

Coping

XiVE® TGPickUp Impression

Coping

Components are selected based on the prosthetic concept.

XiVE® TG Prosthetics

The XiVE® TG product range is a further development of the FRIALOC® implant system. All XiVE®

TG components and instruments (except the drills) are fully compatible with FRIALOC®.Previously placed FRIALOC® implants can still be restored with components of the XiVE® TGprosthetic line.

XiV

E® T

G

XiVE® TG Abutmentstraight orangled 15°

XiVE® TGAttachment


72

Impressions

25 – 9100 � � � XiVE® TG Clinical Set Transfer ImpressionD 3.4 – D 4.5 (Four Transfer Impression Copings )

25 – 9105 � � � XiVE® TG Clinical Set Transfer Impression (short)D 3.4 – D 4.5 (Four Short Transfer Impression Copings)

25 – 9112 � � � XiVE® TG Clinical Set PickUp ImpressionD 3.4 – D 4.5 (Four PickUp Impression Copings withfour TG PickUp Guide Pins)

25 – 1600 � � � XiVE® TG Transfer Impression Coping2

D 3.4 – D 4.5

25 – 1605 � � � XiVE® TG Transfer Impression Coping (short)2

D 3.4 – D 4.5

The short Impression Copings are used for making the impression with anexisting prosthesis.

25 – 1805 � � � XiVE® TG PickUp Impression Coping2

D 3.4 – D 4.5with PickUp Guide Pin

25 – 1701 � � � XiVE® TG PickUp Guide Pin4

If, in cases of implant divergencies, a transfer of the square head is notrequired, please use the FRIADENT® MP Transfer Impression Coping D 3.8(Order no. 46 –1640, see page 57). This impression coping is compatiblewith all diameters of XiVE® TG.

Order No. Article


73

IMZ

-T

win

Plu

s


25 – 9900 � � � XiVE® TG Lab Set Bridge(Castable Waxing Sleeve) D 3.4 – D 4.5(Four TG Castable Waxing Sleeves, four TG Abutment Screws)

25 – 9905 � � � XiVE® TG Lab Set Bridge(Cast-to Waxing Sleeve) D 3.4 – D 4.5(Four TG Cast-to Waxing Sleeves, four TG Abutment Screws)

25 – 4245 � � � XiVE® TG Castable Waxing Sleeve21

D 3.4 – D 4.5 with TG Abutment Screw

25 – 4246 � � � XiVE® TG Cast-to Waxing Sleeve21/8

D 3.4 – D 4.5 with TG Abutment Screw

25 – 4300 � � � XiVE® TG Abutment Screw4

D 3.4 – D 4.5

Soldering Analogs

25 – 9305 � � � XiVE® TG Lab Set Implant-Soldering Analog (Bridge)D 3.4 – D 4.5(Four TG Implant-Soldering Analogs, four TG AbutmentScrews)

25 – 4105 � � � XiVE® TG Lab Set Soldering Analog BridgeD 3.4 – D 4.5TG Implant-Soldering Analog with TG Abutment Screw

The TG Soldering Analog is used for securing the framework in thesoldering base.

Bridges

25 – 9405 � � � XiVE® TG Implant-Soldering Analog Multipack D 3.4 – D 4.5 (Four TG Implant-Soldering Analogs)

25 – 4010 � � � XiVE® TG Implant-Soldering Analog6

D 3.4 – D 4.5

XiV

E® T

G

Order No. Article

Order No. Article


74


25 – 4500 � � � XiVE® TG Abutment straight2

D 3.4 – D 4.5 (straight)with TG Abutment Screw

25 – 4510 � � � XiVE® TG Abutment angled 15°2

D 3.4 – D 4.5 (angled 15°)with TG Abutment Screw

All straight and angled TG Abutments are provided with a horizontal thread(M 1.4). An additional horizontal or transverse screw set is necessary forhorizontally screw-retained crowns (see page 51).

We recommend the use of special titanium drills (Gebr. Brasseler, Lemgo orJota Düsseldorf) for preparing the abutments.

25 – 4520 � � � XiVE® TG AuroBase20/8

D 3.4 – D 4.5with TG Abutment Screw

25 – 4300 � � � XiVE® TG Abutment Screw4

25 – 4401 � � � XiVE® TG Attachment2/4

D 3,4 – D 4,5

Bridges and single crowns

Order No. Article


75

IMZ

-T

win

Plu

s

25 – 9600 � � � XiVE® TG Lab Set Gold Bar Coping9 D 3.4 – D 4.5(Four TG Gold Copings, four TG Coping Screws)

25 – 9700 � � � XiVE® TG Lab Set Titanium Bar Coping D 3.4 – D 4.5(Four TG Titanium Copings, four TG Coping Screws)

25 – 9800 � � � XiVE® TG Lab Set Castable Coping D 3.4 – D 4.5(Four TG Castable Copings, four TG Coping Screws)

25 – 4240 � � � XiVE® TG Gold Bar Coping9

D 3.4 – D 4.5with TG Coping Screw

25 – 4241 � � � XiVE® TG Titanium Bar Coping2


25 – 4242 � � � XiVE® TG Castable Bar Coping21


25 – 4200 � � � XiVE® TG Coping Screw4

Accessories

45 – 4210 FRIADENT Gold Bar round9

50 mm length

45 – 4212 FRIADENT Titanium Bar round2

50 mm length

45 – 4215 FRIADENT Gold Bar Clip9

50 mm length

Soldering Analogs

25 – 9306 � � � XiVE® TG Lab Set Implant-Soldering Analog (Bar)D 3.4 – D 4.5(Four TG Implant-Soldering Analogs, four TG Coping Screws)

25 – 4106 � � � XiVE® TG Lab Set Soldering Analog BarD 3.4 – D 4.5TG Implant-Soldering Analog with TG Coping Screw

Overdentures

XiV

E® T

G

Order No. Article


76

Instruments for impression/prosthetics/laboratory


FRIADENT Ratchet Hex Driver6


FRIADENT Handpiece Hex Driver6


46 – 5750 FRIADENT® Handle for Handpiece Hex Driver6

This handle fits all handpiece drivers.

25 – 5705 XiVE TG Finisher

Order No. Article


77

XiV

E® T

G


78

Presentation material

45 – 9992 Large scale model FRIALIT® Synchro 5 :1(with crown)

45 – 9981 FRIADENT® Acrylic model maxilla without prosthetics(ANKYLOS®, FRIALIT®, XiVE®)

45 – 9982 FRIADENT® Acrylic model maxilla with prosthetics(ANKYLOS®, FRIALIT®, XiVE®)

45 – 9985 XiVE® Acrylic model mandible without prosthetics(bar construction)

45 – 9986 XiVE® Acrylic model mandible with prosthetics(bar construction)

26 – 9110 XiVE® Large Scale Model Set 5:1

CD-ROMs for Presentation

Each CD-ROM contains Powerpoint Presentations and high-resolution picturefiles for the exposing of slides

66 – 1035 CD-ROM FRIALIT® Basics Surgery and Prosthetics

66 – 4037 CD-ROM FRIALIT® Synchro, FRIALIT® BoneProfiler

66 – 4038 CD-ROM FRIALIT® MP-Abutment

66 – 4039 CD-ROM FRIALIT® Select

66 – 7010 CD-ROM XiVE®, PowerPoint presentation and slides

66 – 4036 CD-ROM FRIALIT® Video Sequences in PowerPoint

66 – 4501 CD-ROM, Picture CD FRIALIT®/XiVE®

66 – 1036 CD-ROM, Picture CD DENTSPLY Friadent

66 – 1037 CD-ROM, Picture CD CERCON® plus

66 – 1038 CD-ROM, Picture CD Internet, all Systems

66 – 1067 CD-ROM CERCON®, PowerPoint presentation

66 – 1066 CD-ROM FRIADENT® plus, PowerPoint presentation

Videos

66 – 4046 FRIALIT® System Video (English, PAL)

66 – 4047 FRIALIT® System Video (English, NTSC)

5 – 701012 Implant Passport XiVE®

Order No. Article


79 Pres

enta

tion

mat

eria

l

Materials

Type Index Composition

Titanium 1 Ti grade 1Titanium 2 Ti grade 2Titanium 3 Ti grade 4Titanium 4 Ti6AL4V

Aluminium 5 AlMg3

Stainless steel 6 DIN 1.4305Brass 7 CuZnCast-to alloy* 8 Au: 60%, Pt: 19%, Pd: 20%, Ir: 1%Gold alloy ** 9 Au: 68.6%, Pt: 2.4%, Pd: 4%, Ag: 11.8%,

Cu: 10.6%, Ir: 0.1%, Zn: 2.5%Hard metal 10 K 40

Metals

* TEC 11.9 x 10-6 K-1, pre-heating temperature < 850°C, cast temperature < 1450°C** melting interval from 880 – 940°C

Plastics

Type Index

Polyoxymethylene 20Polymethylmethacrylate 21Polystyrene 22Polytetrafluourethylene 23Polyetheretherketone 24Polyetherimide 25Silicone 26Polycarbonate 27Polypropylene 28

Typ Index Composition

Aluminium oxide 30 Al2O3

Hydroxyapatite 31 Ca5(PO4)3OH

Zirconium oxide 32 ZrO2

Ceramics


80


81


82


83

FRIADENT Class l Medical Devices

In terms of the Directive 93/42/EEC Class l Medical Devices are:– Non-active hand-held surgical and prosthetic instruments for implant placement and

augmentation– Components for impression technique, which do not remain in the patient’s mouth– Non-active components for the planning stage

FRIADENT Class lla, llb and lll Medical Devices

In terms of the Directive 93/42/EEC Class lla, llb and lll Medical Devices are:– Dental Implants, membranes, membrane nails as well as bone reconstruction materials– Active surgical and prosthetic instruments for implant placement and augmentation– Components for impression technique and prosthetic overdenture, which remain in the

patient’s mouth

Manufacturer:FRIADENT GmbH · P. O. Box 71 01 11 · 68221 Mannheim/GermanyPhone: + 49 621 4302-1288 · Fax: + 49 621 47 13 06e-Mail: [email protected] · Internet: http://www.friadent.de

0123


Order No. 6-452001/009

Manufacturer:FRIADENT GmbH · P. O. Box 71 01 11 · 68221 Mannheim/GermanyPhone: + 49 621 4302-1288 · Fax: + 49 621 47 13 06e-Mail: [email protected] · Internet: http://www.friadent.de

0607

09/S

B

ArtKat_FX_Tit_E_rev007 21.06.2007, 10:56 Uhr2

Documents

Catalog Frialit Xive