1
Cartridge Filters Spun Polypropylene Sediment Filter Cartridges Pure Aqua’s spun polypropylene sediment filters are constructed of multi-layers for superior depth filtration. The graded density construction captures particles throughout the entire cross section of the cartridge and reduces surface binding. The cartridges combine quality and cost effectiveness to provide excellent filtration value. Available in a variety of micron ratings and sizes. Pure Aqua’s spun polypropylene sediment filters meet NSF standards. Features & Benefits Multi-layers graded density Excellent chemical resistance Low cost High dirt holding capacity Wide range of micron ratings Wide range of sizes Applications Reverse osmosis pre-filtration Food & beverage industry Potable water Electronics Residential Fine chemicals Plating Metal finishing Car wash Specifications Material Polypropylene Length 9-7/8” - 40” Maximum temperature 60°C / 140°F Micron rating (nominal) 1 - 50 Maximum flow rate 2 - 28 gpm (2.5” diameter) 10 - 30 gpm (4.5” diameter) Cartridge packaging Shrink wrapped 0.8 0.6 0.4 0.2 0 1.0 2.0 3.0 1 micron 5 micron 25 micron 50 micron Pressure Drop Flow (gpm) Part Number Micron Length Case qty PA-101 1 9-7/8” 50 PA-201 1 20” 25 PA-301 1 30” 25 PA-401 1 40” 25 PA-105 5 9-7/8” 50 PA-205 5 20” 25 PA-305 5 30” 25 PA-405 5 40” 25 PA-1025 25 9-7/8” 50 PA-2025 25 20” 25 PA-1050 50 9-7/8” 50 Part Number Micron Length Case qty PA-101-B 1 9-7/8” 24 PA-201-B 1 20” 12 PA-105-B 5 9-7/8” 24 PA-205-B 5 20” 12 PA-1025-B 25 9-7/8” 24 PA-2025-B 25 20” 12 4.5” Diameter 2.5” Diameter (Chart based on 2.5”x10”)

Cartridge Filters · Cartridge Filters Spun Polypropylene Sediment Filter Cartridges Pure Aqua’s spun polypropylene sediment filters are constructed of multi-layers for superior

  • Upload
    others

  • View
    5

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Cartridge Filters · Cartridge Filters Spun Polypropylene Sediment Filter Cartridges Pure Aqua’s spun polypropylene sediment filters are constructed of multi-layers for superior

Cartridge FiltersSpun Polypropylene Sediment Filter Cartridges

Pure Aqua’s spun polypropylene sediment filters are constructed of multi-layers for superior depth filtration. The graded density construction captures particles throughout the entire cross section of the cartridge and reduces surface binding. The cartridges combine quality and cost effectiveness to provide excellent filtration value. Available in a variety of micron ratings and sizes. Pure Aqua’s spun polypropylene sediment filters meet NSF standards.

Features & BenefitsMulti-layers graded densityExcellent chemical resistanceLow costHigh dirt holding capacityWide range of micron ratingsWide range of sizes

S

S

S

S

S

S

ApplicationsReverse osmosis pre-filtrationFood & beverage industryPotable waterElectronicsResidentialFine chemicalsPlatingMetal finishingCar wash

SSSSSSSSS

SpecificationsMaterial Polypropylene

Length 9-7/8” - 40”

Maximum temperature 60°C / 140°F

Micron rating (nominal) 1 - 50

Maximum flow rate 2 - 28 gpm(2.5” diameter)

10 - 30 gpm(4.5” diameter)

Cartridge packaging Shrink wrapped

0.8

0.6

0.4

0.2 0

1.0 2.0 3.01 m

icron

5 micron

25 micron

50 micron

Pressure Drop

Flow (gpm)

Part Number Micron Length Case qty

PA-101 1 9-7/8” 50

PA-201 1 20” 25

PA-301 1 30” 25

PA-401 1 40” 25

PA-105 5 9-7/8” 50

PA-205 5 20” 25

PA-305 5 30” 25

PA-405 5 40” 25

PA-1025 25 9-7/8” 50

PA-2025 25 20” 25

PA-1050 50 9-7/8” 50

Part Number Micron Length Case qty

PA-101-B 1 9-7/8” 24

PA-201-B 1 20” 12

PA-105-B 5 9-7/8” 24

PA-205-B 5 20” 12

PA-1025-B 25 9-7/8” 24

PA-2025-B 25 20” 12

4.5” Diameter

2.5” Diameter

®Pure Aqua, Inc.

(Chart based on 2.5”x10”)