2
Cara Reset Printer Canon MP145 dan MP160 Apa maksudnya dengan E5? Error ink cartridges are not installed properly (error E5) : Step 1 : Push Power switch by continue (Tekan Power On/Off) Step 2 : inserrt plug(Masukan Power, Power Tetap di Tekan) step 3 : Tekan Tombol Reset 1x, lepaskan Tombol Pwr, Tekan Reset dua kali lagi Sampai Menjadi 0 (tekan tombol tanpa jeda) Step 4 : Push + display change from 0 to 1 (tekan tombol + untuk ubah 0 ke 1) Step 5 : Push Power switch again , Printer will be print 1 page(tekan tombol power –> tombol start sampai ngeprint 1 hal.) step 6 : Open cover (buka tutup printer) Step 7 : Unplug (cabut kabel power) Step 8 : Take out ink 40 and 41(lepaskan catridge 40 dan 41) Step 9 : Insert plug again (pasang kabel power) Step 10 : Push power switch (tekan tombol power) Step 11 : Open cover (scan cover) (buka tutup scaner) Step 12 : Inksert ink 40 , 41 again (masukan catridge 40 dan 41) Reset waste ink counter (error E16) : 1. Matikan printer (kabel power masih tercolok), tekan dan tahan tombol STOP/RESET kemudian tekan tombol ON/OFF 2. Tahan tombol ON/OFF, tekan tombol STOP/RESET 2x 3. Lepaskan kedua tombol dan printer akan masuk ke SERVICE MODE 4. Printer akan charging 5. Setelah printer selesai charging, tekan tombol STOP/RESET 4x. (Waste ink counter reset) 6. Setiap kali tombol STOP/RESET ditekan, lampu ON/OFF akan berubah warna hijau dan oranye 7. Matikan printer dan cabut kabel POWER 8. Hidupkan kembali printer.

Cara Reset Printer Canon MP160

  • Upload
    fisju

  • View
    76

  • Download
    4

Embed Size (px)

DESCRIPTION

review

Citation preview

Cara Reset Printer Canon MP145 danMP160

Apa maksudnya dengan E5?

Error ink cartridges are not installed properly (error E5) :

Step 1 : Push Power switch by continue (Tekan Power On/Off)Step 2 : inserrt plug(Masukan Power, Power Tetap di Tekan)step 3 : Tekan Tombol Reset 1x, lepaskan Tombol Pwr, Tekan Reset dua kali lagi Sampai Menjadi 0 (tekan tombol tanpa jeda)Step 4 : Push + display change from 0 to 1 (tekan tombol + untuk ubah 0 ke 1)Step 5 : Push Power switch again , Printer will be print 1 page(tekan tombol power > tombol start sampai ngeprint 1 hal.)step 6 : Open cover (buka tutup printer)Step 7 : Unplug (cabut kabel power)Step 8 : Take out ink 40 and 41(lepaskan catridge 40 dan 41)Step 9 : Insert plug again (pasang kabel power)Step 10 : Push power switch (tekan tombol power)Step 11 : Open cover (scan cover) (buka tutup scaner)Step 12 : Inksert ink 40 , 41 again (masukan catridge 40 dan 41)

Reset waste ink counter (error E16) :

1. Matikan printer (kabel power masih tercolok), tekan dan tahan tombol STOP/RESET kemudian tekan tombol ON/OFF2. Tahan tombol ON/OFF, tekan tombol STOP/RESET 2x3. Lepaskan kedua tombol dan printer akan masuk ke SERVICE MODE4. Printer akan charging5. Setelah printer selesai charging, tekan tombol STOP/RESET 4x. (Waste ink counter reset)6. Setiap kali tombol STOP/RESET ditekan, lampu ON/OFF akan berubah warna hijau dan oranye7. Matikan printer dan cabut kabel POWER8. Hidupkan kembali printer.

The number of the Reset:button pressingLED Function Remarks0 time Green Power off1 time Orange Service pattern print2 times Green EEPROM print3 times Orange EEPROM reset4 times Green Waste ink counter reset5) Unplug cable power. (for MP145 / MP150)6) Turn Off Power. (for MP160)

Error Code/Kode Error:E2-2 = No paper (ASF)E3-3 = Paper jamE4 = No inkE5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properlyE8 = Waste ink absorber full, or platen waste ink absorber fullE9 = The connected digital camera / video camera does not support Camera Direct PrintingE14 = The Ink cartridges whose destination are wrongE15 = Ink cartridge is not installed E16 Ink remaining is unknownE16 -E19 = Failed to scan head alignment sheetE22 = Carriage errorE23 = Paper feed errorE24 = Purge unit errorE25 = ASF(cam) sensor errorE26 = Internal temperature rise errorE27 = Waste ink absorber full or platen waste ink absorber fullE28 = Ink cartridge temperature rise error -E29 = EEPROM errorE33 = Paper feed position errorE35 15 = USB Host VBUD overcurrent error USBE37 17 = Abnormal motor driver errorE40 20 = Other hardware errorE42 22 = Scanner error