Upload
chia-shan-tso-mia
View
206
Download
7
Embed Size (px)
Citation preview
Live Streaming and Surveillance System
User Manual
SSP 1
SSP // safe. secure. protected Live streaming and surveilance system
User manual
This package includes:
A. Raspberry Pi 2 with case x 1B. Power cord x 1C. USB webcam x 2D. Ribbon cable x 1E. Breadboard with wires x 1F. HDMI cable x 1G. Pet immune sensor x 1H. Glass break sensor x 1
You need:
Monitor x 1 Keyboard x 1 Mouse x 1 Ethernet cable x 1
1. Hardware assemblya. Connect USB webcam, mouse and keyboard to the Raspberry Pib. Connect monitor to the Raspberry Pi with HDMI cordc. Check if motion sensor and glass break sensor are connected to the breadboardd. Connect breadboard and Raspberry Pi with the ribbon cable (see figure [1])e. Connect Ethernet cable and power cord to the Raspberry Pi
SSP 2
SSP // safe. secure. protected Live streaming and surveilance system
A B
C D E
F G H
Figure [1]
2. Breadboard wiringa. See figure [1] to check breadboard wiring
b. See figure [2] to check sensor’s wiring
Wire color Function Total amount
Green Connect to GPIO pin 3
Red Power 4
Pink Connect to Sensors 5
Black Ground 8
Brown Connect to LED light 1
3. Raspberry Pi configurationa. Power on by plug-in the power cord to the electrical socket on the wallb. Getting started:
Open terminal and use the following command
i. Su (password:SSP@ssw0rd)ii. Service motion stop
SSP 3
SSP // safe. secure. protected Live streaming and surveilance system
Figure [2]
Figure [3]
c. Start live streaming:i. On the same terminal window, type: cd /usr/src/mjpg-streamerii. ./mjpg_streamer -i "./input_uvc.so -y -n" -o "./output_http.so -w ./www"
iii. If you see below message, the live streaming is startediv.
To check your live streaming, please login to www.ssp.com
d. Start webcam video capture with sensor detection:i. Launch another terminal window, type: python cp.pyii. If you see below message, the sensors are running
e. Now you can unplug your monitor and place the webcam to the preferred locationNOTE: The webcam can only go as far as the webcam cable goes
f. DO NOT close any terminal window or unplug anything on the system
4. FAQ
SSP 4
SSP // safe. secure. protected Live streaming and surveilance system
MJPG Streamer Version.: 2.0 i: Using V4L2 device.: /dev/video0 i:Desired Resolution: 640 x 480 i: Frames Per Second.: 5 i: Format………………: YUV i: JPEG Quality……….: 80 o: www-folder-path……: ./www/ o: HTTP TCP port……..: 8080 o: username:password….:
No Detection on MotionNo Detection on GlassNo Detection on MotionNo Detection on Glass
a. How do I login www.ssp.com to see my live streaming?
b. What happens when the sensor is triggered?i. When either sensor is triggered, the webcam will start capturing video
checkpoint for 5 minutes each timeii. SSP will send you a notification through email that there is a checkpoint in
your Dropboxiii. To check the video, please login to www.dropbox.com
SSP 5
SSP // safe. secure. protected Live streaming and surveilance system
Enter your login information here
Enter your login information here
SSP 6
SSP // safe. secure. protected Live streaming and surveilance system
CONTACTS
If you have any questions, please contact SSP:
SSP (Safe. Secure. Protected) [email protected](403)888-8888MD213 - 1301 - 16 Avenue NW Calgary AB, T2M 0L4
Click video to view and download