18
61 SPINNING www.milo.it [email protected] Prestigiosa canna monopezzo realizzata in carbonio super alto modulo, prodotta in tre azioni dif- ferenti, “medium” – “medium-heavy” – “heavy”. Perfetta per la pesca del black bass e per la tecnica del “flipping”, sia dalla barca che da riva, monta un equipaggiamento “griffato” Fuji, che comprende i pas- santi in “Alconite” a ponte basso, il porta mulinello sagomato in graphite e l’impugnatura in neoprene con la parte superiore a vite munita di un piccolo intarsio con carbonio a vista. Lavorazione del grezzo simile alla versione in due pezzi. Made from super high modulus carbon, this superb one-piece rod is perfect for black bass fishing as well as for flipping from either shore or boat. It comes in a choice of three actions: medium, medi- um-heavy and heavy. It is built with Fuji high-grade components, including short-leg Alconite guides, a moulded graphite reel seat and a neoprene handle with carbon insets on the foregrip. The blank manufacturing process is similar to that used for the two-piece version. Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr 370FM198M 370FMH198 370FM198H 1,98 M 1,98 MH 1,98 H 114 116 120 11,5 12 12,3 1 1 1 9 9 9 198 198 198 5-20 8-25 10-30 Incredibly slim, ultra lightweight and easy to handle, this two-piece rod is a real gem. It is built on a super high modulus carbon blank and features a special ‘marbling’ process on the butt sec- tion which makes the rod more rugged and reliable, while giving it a uniquely attractive appear- ance. Perfect for light and medium-light spinning, the Ultralite is fitted with high-grade components, including original Fuji Alconite guides, a Fuji moulded graphite reel seat and a stylish neoprene handle with a cork butt grip and carbon insets in the foregrip. Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr 370KF0180 370KF0211 370FI0220 370KF0240 370FI0270 370FI0275 1,80 2,10 2,20 2,40 2,70 2,70 90 98 110 110 137 153 6 7 9 10 12 12,5 2 2 2 2 2 2 7 7 8 8 9 9 94 109 114 124 139 139 2-6 3-12 2-15 5-25 10-30 15-45 Un “gioiello” in due pezzi, realizzata in carbonio super alto modulo, incredibilmente sottile, leggera e maneggevole. Il processo di lavorazione delle fibre, tipo “marezzatura”, impresso sulla base, oltre a rendere la canna più solida e affidabile ne valorizza ulteriormente l’aspetto nobile. Perfetta per uno spinning leggero e medio-leggero, si presenta con un equipaggiamento di prima classe, che comprende gli anelli in “Alconite” originali Fuji, il porta mulinello sagomato in graphite, anch’esso originale Fuji ed un’elegante impugnatura in neoprene, con la parte superiore a vite intarsiata in carbonio ed il calcio in sughero. Finesselure Spinning Mono Finesselure Ultralite

Canne Spinning

Embed Size (px)

Citation preview

Page 1: Canne Spinning

61

SPINNING

www.milo.it [email protected]

SPINNING

Prestigiosa canna monopezzo realizzata in carbonio super alto modulo, prodotta in tre azioni dif-ferenti, “medium” – “medium-heavy” – “heavy”. Perfetta per la pesca del black bass e per la tecnica del “� ipping”, sia dalla barca che da riva, monta un equipaggiamento “gri� ato” Fuji, che comprende i pas-santi in “Alconite” a ponte basso, il porta mulinello sagomato in graphite e l’impugnatura in neoprene con la parte superiore a vite munita di un piccolo intarsio con carbonio a vista. Lavorazione del grezzo simile alla versione in due pezzi.

Made from super high modulus carbon, this superb one-piece rod is perfect for black bass � shing as well as for � ipping from either shore or boat. It comes in a choice of three actions: medium, medi-um-heavy and heavy. It is built with Fuji high-grade components, including short-leg Alconite guides, a moulded graphite reel seat and a neoprene handle with carbon insets on the foregrip. The blank manufacturing process is similar to that used for the two-piece version.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370FM198M370FMH198370FM198H

1,98 M1,98 MH1,98 H

114116120

11,512

12,3

111

999

198198198

5-208-25

10-30

Incredibly slim, ultra lightweight and easy to handle, this two-piece rod is a real gem. It is built on a super high modulus carbon blank and features a special ‘marbling’ process on the butt sec-tion which makes the rod more rugged and reliable, while giving it a uniquely attractive appear-ance. Perfect for light and medium-light spinning, the Ultralite is � tted with high-grade components, including original Fuji Alconite guides, a Fuji moulded graphite reel seat and a stylish neoprene handle with a cork butt grip and carbon insets in the foregrip.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370KF0180370KF0211370FI0220370KF0240370FI0270370FI0275

1,802,102,202,402,702,70

9098

110110137153

679

1012

12,5

222222

778899

94109114124139139

2-63-122-155-25

10-3015-45

Un “gioiello” in due pezzi, realizzata in carbonio super alto modulo, incredibilmente sottile, leggera e maneggevole. Il processo di lavorazione delle � bre, tipo “marezzatura”, impresso sulla base, oltre a rendere la canna più solida e a� dabile ne valorizza ulteriormente l’aspetto nobile. Perfetta per uno spinning leggero e medio-leggero, si presenta con un equipaggiamento di prima classe, che comprende gli anelli in “Alconite” originali Fuji, il porta mulinello sagomato in graphite, anch’esso originale Fuji ed un’elegante impugnatura in neoprene, con la parte superiore a vite intarsiata in carbonio ed il calcio in sughero.

Finesselure Spinning Mono

Finesselure Ultralite

Page 2: Canne Spinning

SPINNING

www.milo.it [email protected]

SPINNING SPINNINGSPINNING

Prestigiosa canna in due pezzi realizzata in carbonio super alto modulo, disponibile in tre ver-sioni, con casting di� erenti, appartenenti comunque ad uno spinning medio-pesante. La base presenta un aspetto “marezzato” dato dalla particolare lavorazione delle � bre, impiegate per ren-dere il prodotto più solido e a� dabile. La “MH” esprime un’azione progressiva di punta, la “H” spic-ca per la totale rigidità, mentre la "M" spicca per azione progressivo-parabolica. Montano i passan-ti in “Alconite” originali Fuji, il porta mulinello sagomato in graphite, anch’esso originale Fuji, ed un’impugnatura in neoprene con la parte superiore a vite intarsiata in carbonio.

A superb two-piece casting rod made from super high modulus carbon, specially designed for medium-heavy spinning. It comes in three versions with di� erent casting weights. The butt sec-tion has a marble-like appearance resulting from a special � bre processing method which gives this rod extra strength and reliability. The “MH” version delivers a progressive tip action, the “H” version is ultra sti� , while the "M" version delivers a parabolic-progressive tip action. All versions are equipped with original Fuji Alconite guides, a Fuji moulded graphite reel seat and a neoprene handle with carbon insets in the foregrip.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370FSH198370FS0198370FSM198

1,98 H1,98 MH1,98 M

98104106

910

10,5

222

888

9494

102

10-308-255-20

Canna da casting di elevata fattura, in due pezzi, realizzata in carbonio super alto modulo. E’ disponi-bile nell’azione “MH”, progressiva di punta, “H”, total-mente rigida e "M" progressivo-parabolica. Si presen-tano con lo stesso grezzo e tipo di lavorazione della “Finesselure Spinning”. La di� erenza la fa l’equipag-giamento, sempre comunque “targato” Fuji, che comprende i passanti monoponte sulla cima, ad ec-cezione del primo a ponte doppio sulla base, ed il porta mulinello a vite in graphite munito del tipico “grilletto”. Impugnatura in neoprene.

This � nely crafted two-piece casting rod is manufactured from super high modulus carbon. It comes in three versions, "MH" with a progressive tip action, "H" providing an ultra sti� action and "M" delivers a parabolic-progressive tip action. This rod is based on the same blank and building process as the Finesselure Spinning but di� ers for the type and quality of rod components, which include Fuji single-leg guides on the tip section plus a double-leg guide on the butt section, a Fuji graphite screw reel seat with trigger grip and a neoprene handle.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370FC0198370FM0198370FH0198

1,98 M1,98 MH

1,98H

11310296

11109

222

999

1029494

5-208-25

10-30

Finesselure Spinning

Finesselure Casting

Page 3: Canne Spinning

SPINNINGSPINNING

63

SPINNING

www.milo.it [email protected]

SPINNING

Prestigiosa canna in due pezzi ad innesti, in altissimo modulo di carbonio, progettata per uno spinning in mare dalla barca, rivolto soprattutto alle spigole. Si presenta con calciatura sottilissima, legature accurate, passanti “low pro� le” con pietra inscal� bile ed un’impugnatura con porta mulinello a vite, in neoprene ed alluminio anticorrosione, contornata, nella parte superiore, da piccoli incavi per il � ssaggio dell’amo.

Made from super high modulus carbon, this stylish and classy two-piece take-apart spinning rod, specially designed for sea spinning and ideal for sea bass, of-fers a super slim butt and top-quality whippings. It features “low pro� le” guides with anti-scratch coating and a neoprene and corrosion-resistant aluminium handle � tted with screw reel seat and provided in the upper section with a series of notches to retain the hook.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370TF0210370TF0240370TF0260

2,102,402,60

209231245

111212

222

788

110125130

20-5020-5020-50

Technocraft Spin

Page 4: Canne Spinning

SPINNING

www.milo.it [email protected]

SPINNING SPINNINGSPINNINGSR 5 - Casting e Spinning

Canna in due sezioni prevista nella versione “casting” e “spinning”, realizzata in carbonio alto modulo giapponese e caratterizzata dalla possi-bilità di passare da mt 2,10 a mt 2,40 con l’aggiunta di uno spezzone di cm 30 comprensivo di passante. Questa opzione consente di avere due canne in una e ne favorisce l’utilizzo in ambienti diversi (torrente-� ume-lago). Molto curata l’estetica sobria ed essenziale, con componenti di pregio come i passanti in pietra in Carburo di Silicio ( ponte basso per la “casting” e ponte alto per la “spinning”), placca porta mulinello a vite in graphite ( a pistola nella versione “casting”) e impugnatura sdoppiata in neoprene antiscivolo. Il tallone ha la parte inferiore in sughero. Racco-mandata da M. Altamura.

This two-piece rod is o� ered in two versions for casting and spinning. It is made from Japanese high modulus carbon and can be extended from 2.10 m to 2.40 m with the addition of a 30 cm extension � tted with a guide. This extension system gives two rods in one, allowing the rod to be quickly adapted to di� erent � shing conditions (stream, river, lake). Aesthetically plain and accurate in every detail, this rod is � nished with high-grade components: silicone carbide guides (short-leg for the casting version, long-leg for the spinning version), graphite screw reel seat (trigger-type for the casting version), neoprene handle with non-slip double grip and cork butt. Recommended by Marco Altamura.

Modello Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr Line Rating lbsCasting

Spinning370SRC005370SRS005

2,10/2,40 M2,10/2,40 M

154162

1212

2 + 12 + 1

8 - 98 - 9

110110

5-255-25

8-208-20

Page 5: Canne Spinning

SPINNINGSPINNING

65

SPINNING

www.milo.it [email protected]

SPINNINGSR 2B - Casting e Spinning

Prestigiosa canna da “spinning” e da “casting” in due sezioni realizzata in carbonio alto modulo giapponese caratterizzata da una spiccata azione di punta e da un’accattivante veste gra� ca. Monta passanti in pietra in Carburo di Silicio ( ponte basso per la “casting” e ponte alto per la “spinning”), placca porta mulinello a vite in graphite ( a pistola nella versione “casting”) , impugnatura sdoppiata in neoprene antiscivolo e calcio in gomma. Ottimo attrezzo per la pesca del bass da natante o dal belly boat. Raccomandata da Marco Altamura.

Designed to suit both casting and spinning needs, this superb two-piece rod is made from Japanese high modulus carbon and delivers a fast tip action. It features attractive cosmetics and comes � tted with silicone carbide guides (short-leg for the casting version, long-leg for the spinning version), a graphite screw reel seat (trigger-type for the casting version) and a neoprene handle with non-slip double grip and rubber butt. Perfect for bass � shing from boat or belly boat. Recommended by Marco Altamura.

Modello Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr Line Rating lbsCasting

Spinning370SRC02B370SRS02B

2,10 M2,10 M

165140

11,510

22

88

110110

5-255-21

8-208-18

Page 6: Canne Spinning

SPINNING

www.milo.it [email protected]

SPINNING SPINNINGSPINNINGSR 2C / 2D / 2E / 2F - Spinning

SR 1B / 1C / 1D / 1E - Spinning

Prestigiosa serie di canne da spinning in due / tre sezioni rea-lizzata in carbonio alto modulo giapponese caratterizzata da gran-de potenza, precisione, leggerezza e robustezza. Monta passanti in pietra in Carburo di Silicio ponte alto , placca porta mulinello a vite in graphite, impugnatura sdoppiata in neoprene antiscivolo con � nitura “camou” e calcio in sughero. Progettate anche per insi-diare predatori marini quali spigole e serra o grosse trote e lucci in � ume e lago. Raccomandata da Marco Altamura.

Made from Japanese high modulus carbon, this range of su-perb two/three-piece spinning rods combine power and rugged-ness with lightness and accuracy. Main features include long-leg silicone carbide guides, a graphite screw reel seat and a non-slip double-grip neoprene handle with camo � nish and cork butt. Specially designed to target sea predators such as bass and blue� sh or to � sh for big trout and pike on rivers and lakes. Recommended by Marco Altamura.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr Line Rating lbs370SRS02C370SRS02D370SRS02E370SRS02F

2,40 M2,70 M

3,00 MH3,30 MH

200205225275

1213,51314

2233

8899

125140105105

7-3510-4520-6020-60

8-2210-2515-4015-40

Prestigiosa serie di canne da spinning in due sezioni previste con doppio cimino e quindi con due azioni di� e-renti. Realizzate in carbonio alto modulo giapponese, sono rivolte principalmente agli amanti del Bass Fishing sia a piede asciutto che da natante o da belly boat. Hanno � niture di pregio ed un’accattivante veste gra� ca tipica dei prodotti del “Sol Levante”. Montano passanti in pietra in Carburo di Silicio ponte alto , placca porta mulinello a vite in graphite, impugnatura sdoppiata in neoprene antisci-volo e calcio in gomma. Possono essere utilizzate sia nella pesca “� nesse” che nel “power � shing”. Raccomandata da Marco Altamura.

This superb range of two-piece spinning rods comes with a choice of two tips providing di� erent actions. Made from Japanese high modulus carbon, these rods are designed for bass � shing either from the shore or from a boat or belly boat. They feature distinctive Japanese-style cosmet-ics and top-quality � ttings, including long-leg silicone carbide guides, a graphite screw reel seat and a non-slip double-grip neoprene handle with rubber butt. They can be used also for � nesse and power � shing. Recommended by Marco Altamura.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr Cimini Line Rating lbs370SRS01E370SRS01B370SRS01C370SRS01D

1,98 ML/M2,10 M/MH2,40 M/MH2,70 M/MH

130130180195

11121213

2222

7788

102108124140

3-18/5-255-25/10-306-28/12-355-21/14-28

2222

5-10 / 8-146-12 / 10-208-17 /12-258-17 / 10-20

Page 7: Canne Spinning

SPINNINGSPINNING

67

SPINNING

www.milo.it [email protected]

SPINNINGSR 1A / 1B / 1G - Casting

Rolix Slim Bass

Prestigiosa serie di canne da casting in due sezioni previste con doppio cimino e quindi con due azioni di� e-renti. Realizzate in carbonio alto modulo giapponese, sono rivolte principalmente agli amanti del Bass Fishing sia da riva che da natante o da belly boat. Hanno � niture di pregio ed un’accattivante veste gra� ca tipica dei prodotti del “Sol Levante. Montano passanti in pietra in Carburo di Silicio ponte basso , placca a pistola porta mulinello a vite in graphite, impugnatura sdoppiata in neoprene antisci-volo e calcio in gomma. Possono essere utilizzate sia nella pesca “� nesse” che nel “power � shing”. Raccomandata da Marco Altamura.

This superb range of two-piece casting rods comes with a choice of two tips providing di� erent actions. Made from Japanese high modulus carbon, these rods are designed for bass � shing either from the shore or from a boat or belly boat. They feature distinctive Japanese-style cosmet-ics and top-quality � ttings, including short-leg silicone carbide guides, a graphite trigger-style screw reel seat and a non-slip double-grip neo-prene handle with rubber butt. They are ideal also for � nesse and power � shing. Recommended by Marco Altamura.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr Cimini Line Rating lbs370SRC01G370SRC01A370SRC01B

1,80 ML/M1,98 M/MH2,10 M/MH

120122126

1211,512

222

888

95102110

3-18/5-254-14/7-21

5-25/10-30

222

5-10 / 8-146-12 / 10-206-12 / 10-20

Canna in due sezioni ad innesti, realizzata in carbonio alto modulo ultraresistente. E’ dedicata alla tecnica del “Bass Fishing” e possiede un’azione super rigida. Indicata per l’utilizzo con � li da 12 a 20 lb. Monta passanti SIC II ed impugnatura in neoprene con porta mulinello sagomato a vite. Presenta im-peccabili ri� niture.

Designed with bass � shing in mind, this two-piece take-apart rod is built on a blank of ultra-strong high modulus carbon providing a super sti� action. Ideal to be used with 12 to 20 lbs lines, this rod is accurate in every detail and comes � tted with SIC II guides and a neoprene handle with moulded screw reel seat.

Cod. Mod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting oz Line Rating lbs370RX0168370RX0180370RX0019370RX0210

--

MONOPEZZO-

1,681,801,982,10

127164168190

10111213

2212

7789

8795

198110

3/8-13/8-13/8-13/8-1

12-2012-2012-2012-20

Page 8: Canne Spinning

SPINNING

www.milo.it [email protected]

SPINNING SPINNINGSPINNINGExcel Spin

Hypnos Spin

Serie in due pezzi, con innesto riportato, meglio noto come “spigot”. E’ realizzata in carbonio alto modulo e la struttura di quest’ultimo è a celle a nido d’ape. Monta pas-santi in SIC II nella doppia versione “low-pro� le” e ponte basso, porta mulinello a vite in lega d’allumi-nio e presa in neoprene sul calcio della base. E’ una canna che si distingue, sia per l’estetica ra� nata che, in termini tecnici, per essere molto “dura” sotto, ma piut-tosto “dolce” in punta. Pregevole, il livello di legature, ver-niciatura e ri� niture in generale.

Range of two-piece rods with spigot joint, manufac-tured from honeycomb high modulus carbon. All models are � tted with a combination of low-pro� le and low-leg SIC II guides, aluminium alloy screw reel seat and neoprene butt grip. The action is tough in the lower part of the blank but softer in the tip. The Excel Spin rods feature stylish cosmetics with accurate whippings and top-quality � nish.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370EX0240370EX0260

2,402,70

196219

11,512

22

89

125135

35 max35 max

Serie di canne, in due pezzi con innesto a spigot, per la pesca a spinning. Sono realizzate in alto modulo di carbonio e presentano spirali circolari esterne, molto ravvicinate, su entrambi gli elementi. Si distinguono per le ottime ri� niture, per la rapidità d’azione, per i diametri sottilissimi e per essere perfettamente bilanciate e maneggevoli, prerogative fondamentali appartenenti alle canne di alto pregio, quali le “Hypnos” che devono subito balzare all’occhio dell’esperto. Hanno l’impugnatura in sughero naturale a bassissima porosità, montano passanti in SIC a basso pro� lo e il porta mulinello a vite, sagomato nella parte superiore.

This series of two-piece spinning rods with spigot joint is built with high modulus carbon and re-inforced with spiral wraps on both sections. Perfectly balanced and easy to handle, these rod o� ers ultra-slim diameters and a fast action. They come with a top-quality � nish, a low-porosity natural cork handle, low-pro� le SIC guides and a screw reel seat moulded on the top.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370HYA210370HYA240370HYB240370HYB270370HYC240370HYC270370HYD270370HYD300

2,10 - HA2,40 - HA2,40 - HB2,70 - HB2,40 - HC2,70 - HC2,70 - HD3,00 - HD

123145154170190196238288

99

9,51011121314

22222222

910998888

110124125138125140140155

3-123-12

10-3010-3030-5030-50

60-10060-100

Page 9: Canne Spinning

SPINNINGSPINNING

69

SPINNING

www.milo.it [email protected]

SPINNINGSalt Basser XX Super Heavy

Salt Basser X Heavy

Technocraft Sea Bass

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370BA0270370BA0300370BA0330370BA0360

2,703,003,303,60

240278303359

12,5131416

2222

7777

138148171185

14-6014-6014-6014-60

Canne con � bre polimeriche compattissime che donano all’attrezzo una eccellente risposta in fer-rata e una potenza senza pari. L’attrezzo, indicato ad una elite di estimatori, è preciso nel lancio, non “svirgola”, non dà contraccolpi e le risposte alle sollecitazioni dell’esca sono tutte e� cienti, anche quando l’arti� ciale è molto lontano da riva. Gli anelli a ponte doppio sono SIC II, a� dabili e performan-ti. L’impugnatura è in neoprene e la placca portamulinello è a vite. In dotazione una custodia rigida con tracolla regolabile.

Rod featuring an exceptional high modulus carbon construction with ultra compact polymeric � -bres ensuring unequalled power and excellent responsiveness on strike. Accurate on casting, this rod responds smoothly to all the movements of the lure, even at long distance from the shore. Sea spin-ning is a highly specialised techniques which requires speci� c technical skills, therefore this rod is in-tended for a narrow circle of connoisseurs. Features reliable and performing double-legged SIC II guides, neoprene handle and screw real seat and comes with a rigid holdall with adjustable shoulder strap.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370BH0270370BH0300370BH0330

2,703,003,30

238251264

1212,513

222

777

140158172

10-5010-5010-50

Canna in due pezzi ad innesti, di elevata fattura, costruita in alto modulo di carbonio. E’ stata pro-gettata per uno spinning in mare dalla barca, rivolto soprattutto alle spigole, ma può anche essere sfruttata per quello tradizionale in acque dolci. Possiede un’azione “medium – heavy”, è anellata con passanti in SIC a ponte basso e presenta l’impugnatura in neoprene con porta mulinello sagomato a vite.

Made from high modulus carbon, this � nely-crafted two-piece, take-apart rod has been designed for sea spinning from boat for bass, but is equally perfect for freshwater predator � shing. Very attrac-tive in cosmetics, the Technocraft comes with a medium-heavy action and features short-leg SIC guides and a neoprene handle with a moulded screw reel seat.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370TF0212370TF0273

2,12 MH2,73 MH

143190

1012

22

99

110140

10-3210-32

Page 10: Canne Spinning

SPINNING

www.milo.it [email protected]

SPINNING SPINNINGSPINNINGKerak Spin

Titan Spin

KERAK SPIN HV - Serie di canne in due pezzi, costruite in high modulus carbon e concepite per uno spinning con arti� ciali medio – pesanti. La gamma “Kerak”, contras-segnata dalla sigla “HV”, è proposta in tre metrature, con diametri sottili. Possiedono un fusto decisamente rigido ed un’azione dura in punta. Sono equipaggiate con l’ac-coppiata di passanti in SIC low pro� le e SIC a ponte corto, porta mulinello a vite in lega d’alluminio bronzata, impugnatura con base in neoprene e gancino ferma amo. KERAK SPIN ML - Versione unica, per uno spinning con arti� ciali medio-leggeri. Rispet-to al modello “HV”, di cui mantiene l’equipaggiamento simile, questa presenta un’azio-ne ovviamente più “dolce”, in virtù del casting inferiore.

KERAK SPIN HV - Range of high modulus carbon two-piece rods, specially de-signed for spinning with medium-heavy lures. The “Kerak” range, marked with the initials “HV”, has low diameters and comes in three lengths. They feature a very sti� blank and provide a sti� tip action. All rods come � tted with a combination of low-pro� le and short-leg SIC guides, screw reel seat made from bronzed aluminium alloy, neoprene handle and hook retainer. KERAK SPIN ML - Specially designed for spinning with medium-light lures, this rod comes in one version only. The Kerak Spin "ML" has the same � ttings as the “HV” range, but provides a softer action due to its lower casting weight.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370HV0210370HV0240370HV0270370KM0210

2,10 HV2,40 HV2,70 HV2,10 ML

143162175136

1011,5129

2222

9999

110126139110

14-3614-3614-368-22

Denominata “powerfull action” la Titan è un capolavoro di ingegneria. Disegnata da Lu-ciano Cerchi questa canna garantisce prestazioni davvero eccellenti in ogni sua misura e il motivo di una gamma così ampia è dovuto proprio al fatto di voler ottenere degli attrezzi speci� ci e specializzati per ogni situazione di pesca. Prestigiosa anche nelle ri� niture, monta SIC originali leggerissimi a basso pro� lo e un elegante, oltre che a� dabile, portamulinello a vite. Quest’ultimo, una volta serrato, racchiude il piede del mulinello inglobandolo nella can-na. Il manico è in sughero pregiato con miscele a maggiore densità nei punti di maggiore lo-gorio, all’inizio e alla � ne del calcio. Innesto delle sezioni smussato in punta, lavorazione a spirale con � bre di carbonio alto modulo. Rigida e scattante, azione di punta sensibilissima. E’ completa di elegante fodero semi rigido.

Named “powerful action”, Titan is a masterpiece of engineering. This series, designed by Luciano Cerchi, ensures unequalled performance of-fering specialised tools for any � shing situation. Features a top-quality � nish, genuine ultra-lightweight low-pro� le SIC guides and a stylish and reliable screw reel seat which tightens on the reel foot incorporating it into the rod butt. The handle is made from top-quality cork with higher-density mixes on fast wearing points at the both ends of the butt. The rod is made from high modulus carbon spiral wraps with rounded section joints. Sti� and crisp, this rod provides an ultra-sensitive tip action. It comes with a stylish semi-rigid holdall.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370TI0180370TI0195370TI0215

1,801,952,15

157164187

8,58,59

222

777

96104112

10 - 3010 - 3010 - 30

Page 11: Canne Spinning

SPINNINGSPINNING

71

SPINNING

www.milo.it [email protected]

SPINNING

Realizzata in carbonio alto modulo in quattro sezioni con innesto a spigot. La particolare azione leggera-progressiva, la lunghezza di mt. 2,35 e la grammatura da 4 a 21 gr. la rendono adatta a tutte le occasioni di lancio in laghetto. Mon-ta anelli in SIC, impugnatura in sughero.

4-section rod from high modulus carbon with spigot joints. With a length of 2.35 m, a casting power of 4 to 21 gr. and a light-progressive action this rod covers any casting situation on lakes. Features SIC guides and cork handle. Closed length 63 cm only.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370LQ0235 2,35 162 9 4 8 63 4-21

Holiday Lake Queen

Holiday 4x4

Realizzata in carbonio alto modulo è unica nel suo genere per lo spinning ultra leggero estre-mo. È lunga mt. 2,10 e divisa in quattro sezioni di soli 52 cm. con innesti a spigot di gran precisione. Lancia da 0 a 7 gr. monta anelli in SIC, manico in sughero con anelli portamulinello scorrevoli per ottimizzare la bilanciatura della canna. Ha un corredo di quattro vettini sdoppiati, su cui è indicato l’ uso delle esche ottimali. Insuperabile per lanciare arti� ciali di peso in� nitesimale, è a� dabile an-che nei recuperi impegnativi.

This high modulus carbon rod for extreme ultra-light spinning has no equal in its class. It’s 2.10 m in length and features 4 sections of 52 cm with precision spigot joints. Provides a casting power of up to 7 gr. Has SIC guides and a cork handle with reel sliding rings for improved rod balance. Comes with a kit of four two-piece tips, each tip bearing the indication of the most appropriate bait to be used. O� ers unequalled performance when casting ultra-light lures, but it is also extremely reliable on di� cult retrieves.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370HD0210 2,10 78 8 4 6 52 0-7

Page 12: Canne Spinning

SPINNING

www.milo.it [email protected]

SPINNING SPINNINGSPINNINGHoliday River Queen Spin

Holiday River Queen Light

Canna in carbonio alto modulo in quattro sezioni con innesto a spigot. La particolare azione progressiva, la lunghezza di mt 2,35 e la gramma-tura da 5 a 15 gr. la rendono adatta a tutte le occasioni di lancio leggero in fiume. Monta anelli in SIC, impugnatura in sughero.

This rod features 4 sections from high modulus carbon with spigot joints. With a length of 2.35 mt. a casting power of 5 to 15 gr. and a progres-sive action, this rod is ideal for light casting on rivers. Fitted with SIC guides and cork handle.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370HD0235 2,35 160 9 4 8 64 5-15

Realizzata in carbonio alto modulo in quattro sezioni con innesto a spigot. La particolare azione medio-progressiva, la lunghezza di mt. 2,35 e la grammatura da 10 a 28 gr. la rendono adatta a tutte le occasione di lancio medio in � ume. Monta anelli in SIC, impugnatura in su-ghero.

This rod features 4 sections from high modulus carbon with spigot joints. With a length of 2.35 m, a casting power of 5 to 15 gr. and a progressive action, this rod is ideal for light casting on rivers. Fitted with SIC guides and cork handle. Closed length 63 cm only.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370RQ0240 2,35 160 9 4 8 64 10-28

Page 13: Canne Spinning

SPINNINGSPINNING

73

SPINNING

www.milo.it [email protected]

SPINNING

Canna in due pezzi realizzata in carbonio ad alta resistenza, ideale per uno spinning medio - pesante, soprattutto pescando dalla barca. Ha un’azione progressiva di punta ed è montata con una coppia iniziale di passanti “low pro� le”, seguita da una serie a ponte basso, tutti con pietra inscal� bile. Impugnatura in neoprene e porta mulinello a vite. Ottimo rapporto qualità-prezzo.

This two-piece high-strength carbon rod delivers a progressive tip action ideal for medium-heavy spinning, especially when boat � shing. It features two low-pro� le guides, one on the butt and one on the second section, followed by a series of short-leg guides, all with scratch-resistant inserts. Neoprene handle and screw reel seat. True value for money.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370FL0198 370FL0210 370FL0240370FL0270

1,982,102,402,70

144149220230

9,5101213

2222

7788

104111126145

7-307-307-307-30

Strategy Spin Travel 1,50

Fastlure Spinning

Strategy Spin Travel 1,80

Dei piccoli gioielli di tecnologia. Leggere, sottili, sensibilissime, queste le caratteristiche della serie in carbonio alto modulo studiata per la pesca leggera a corta e media distanza. La ripartizione in quattro pezzi non provoca perdite di sensibilità e precisione, irrigidisce leggermente gli attrezzi rendendo ancor più divertente l’azione. Maneggevoli e precise, le Spin Travel rientrano nel progetto di canne da viaggio Milo e dispongono quindi dei mi-gliori componenti accessori: manico in sughero, portamulinello a vite, innesti spigot preci-sissimi, verniciatura antigraffio del fusto, anelli SIC II e una pratica custodia rigida.

Slim, lightweight and extremely responsive, these high modulus carbon rods are little gems of technology specially designed for short and medium-range light fishing. While the four-section construction does not compromise the rod performance in terms of accuracy and sensitivity, it makes the tool slightly stiffer resulting in a more exciting fish-playing ac-tion. Easy to handle and precise, the Spin Travel rods offer the best features of the Milo “travel range”: cork handle, screw reel seat, precision-ground spigot joints, anti-scratch finish, SIC II guides and a practical stiff holdall.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370ST0150370ST0180

1,501,80

8085

99

44

56

4351

3-103-10

Page 14: Canne Spinning

SPINNING

www.milo.it [email protected]

SPINNING SPINNINGSPINNINGShobak Spin

Rapsodia Spinning

Classica canna in due pezzi, costruita in carbonio high resistance, indicata per gli amanti dello spinning che si avvicinano a questa tecnica di pesca. Viene prodotta in tre lunghezze, di cui la centrale abbastanza singolare, ma con un casting unico. Possiede un’azione rigida e secca, ma in situazioni estreme evidenzia una curvatura armoniosa che si protrae lungo tutto il fusto. Monta anelli in SIC II a ponte basso, porta mulinello a vite ed impugnatura in neoprene, sagomata nella parte inferiore.

Made from high-resistance carbon, this classic two-piece rod is specially designed for spinning beginners. It comes in one casting weight only and three di� erent lengths, with the middle one being quite unusual. It provides a crisp and rigid action, but under extreme � sh-playing situations it produces a � awless curve over the entire length of the blank. Fitted with low-leg SIC II guides, screw reel seat and neoprene handle moulded in the bottom section.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370SS0066370SS0076370SS0090

1,982,282,70

128151197

1010,511,5

222

89

10

102118140

10-3010-3010-30

Serie di canne in due pezzi realizzate in carbonio alto modulo con � nitura satinata opaca antiri� es-so e passanti in Alconite , porta mulinello a vite in graphi-te ed impugnatura in E.V.A. con tallone in sughero alta densità. Sono previste quattro azioni (Soft- Medium-Hea-vy-Ultra) per rispondere a tutte le esigenze dello spinner evoluto. Risultano molto ben bilanciate, rapide in ferrata e al contempo progressive con il pesce in canna. Ottimo rapporto qualità-prezzo.

This range of two-piece spinning rods are made from high modulus carbon with non-glare satin � nish. Rod fea-tures include Alconite guides, a graphite screw reel seat and an EVA handle with high-density cork butt. Well balanced with a fast strike-response and a progressive � sh-playing action, these rods o� er a choice of four actions (Soft, Medium, Heavy, Ultra) to meet the needs of the most demanding angler. Excellent value for money.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370RA5210370RA5240370RA5270 370RA1210370RA1240370RA1270370RA2210370RA2240370RA2270370RA3210370RA3240370RA3270

2,10 S2,40 S2,70 S2,10 M2,40 M2,70 M2,10 H2,40 H2,70 H2,10 U2,40 U2,70 U

130145180150165200170185220185210240

1012,513,510

12,513,510

12,513,510

12,513,5

222222222222

888888888888

105120135105120135105120135105120135

5-215-215-21

10-3010-3010-3020-4020-4020-4030-6030-6030-60

Page 15: Canne Spinning

SPINNINGSPINNING

75

SPINNING

www.milo.it [email protected]

SPINNING

Concept Spinning Lures

Concept Spinning Lures

Concept Casting LuresConcept Casting Lures

Gamma di quattro canne che rappresentano la versione “heavy” della stessa serie; sono anch’esse realizzate in carbonio alto modulo in due sezioni ad innesti indicate per uno spinning decisamente pesante rivolto ai grandi predatori sia delle acque dolci che di mare. La gamma com-prende due modelli da mt 2,70 e due modelli da mt 3,00 con di� erenti range di potenza. La componentistica di qualità prevede l’utilizzo di pas-santi robusti in SIC II a doppio ponte con all’interno la pietra in carburo di silicio ad alta dispersione del calore, impugnatura mista in materiale E.V.A. di colore nero e sughero primo � ore con porta mulinello in gra� te a vite. Tutti i modelli sono caratterizzati da un’azione molto potente.

This range of four rods represents the ‘heavy action’ version of the Concept series. All rods are two-piece take apart and feature high modulus carbon blanks with powerful actions, making them ideal for heavy spinning for large fresh and saltwater predators. The range o� ers two models in the length of 2.70 m and two models in the length of 3.00 m models providing di� erent casting weights. All rods are � nished with high-grade components including heavy-duty double-legged SIC II guides with heat-dissipating silicon carbide inserts and a high-grade cork and black EVA foam handle complete with a graphite screw reel seat.

Cod. Mod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370CS1019370CS1021370CS1023370CS1519370CS1521370CS1523370CC0198

SpinningSpinningSpinningSpinningSpinningSpinningCasting

1,982,102,401,982,102,401,98

124129143130140141129

99

11,511

11,510,510

2222222

8898898

105110120104110120104

10-3010-3010-3015-4015-4015-4015-40

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370CS0627370CS0630370CS0827370CS0830

2,703,002,703,00

256274267312

14161618

2222

7777

144158144158

60608080

Cod. Mod. Lungh. mt Ø mm N° Sez. N° Anelli

Serie di canne ad innesti in due sezioni in versione da spinning e da casting, realizzate in carbonio alto modulo e caratterizzate da un’azione “fast” adatta principalmente al “Bass Fishing”, ma utilizzabili anche per insidiare altri predatori sia nelle acque dolci che in mare. La componentisti-ca di qualità, prevede l’utilizzo di passanti SIC II con all’interno la pietra in carburo di silicio ad alta dispersione del calore nella versione a doppio ponte basso per il modello Casting e ponte basso singolo nella versione Spinning. Completano la dotazione l’impugnatura sdoppiata in materiale E.V.A. di colore nero ed arancio con porta mulinello sagomato in gra� te a vite e l’hook retainer per l’aggancio dell’arti� ciale.

This range of two-section take-apart rods is o� ered in two versions for casting and spinning. Made from high modulus carbon, they have a fast action which makes them ideal for bass � shing but also suitable for targeting other fresh and saltwater predators. All rods are � nished with high-grade components including SIC II guides with heat-dissipating silicon carbide inserts in two versions - short-leg for casting, long-leg for spinning, and a black and orange double grip EVA handle complete with a graphite moulded screw reel seat. A small hook retaining ring is placed on the underside of the rod to secure the � shing lure

Page 16: Canne Spinning

SPINNING

www.milo.it [email protected]

SPINNING SPINNINGSPINNING

Satanika Spinning HH

Satanika Spinning

Redheart Twin Tips

Canna in carbonio dall’eccellente rapporto qualità-prezzo. E’ in due pezzi, equipaggiata con passanti SIC II a ponte basso, impugnatura in neoprene e porta mulinello sagomato a vite. Rappresenta la scelta giusta per tutti coloro che, con una spesa modesta, vogliono avvicinarsi alla tecnica dello spinning utilizzando comunque un prodotto valido ed a� dabile. Quattro le azioni di� erenti, di cui la più potente, contrassegnata con la sigla “HH”, disponibile nelle due metrature più lunghe.

This two-piece carbon spinning rod is the perfect choice for beginners who want a reliable, high-quality rod at an a� ordable price. It is � tted with short-leg SIC II guides, neoprene handle and moulded screw reel seat and o� ers a choice of four casting weights. The two longest models provide the most powerful action, marked with the letters HH. Excellent value for money.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370SS2210370SS2240370SS3210370SS3240370SS3270370SS4210370SS4240370SS4270

2,102,402,102,402,702,102,402,70

123140130142152137149191

1011,210

11,511,810

11,811

22222222

67677677

110123110123138108123138

8-258-25

10-3010-3010-3015-4515-4515-45

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370SP0024370SP0027

2,402,70

213261

1616,5

22

66

125140

40-8040-80

Canna prodotta per lanciare grammature molto leggere. E’ in � bra di carbonio e dispone di due vettini in � bra di vetro. La pronunciata elasti-cità dell’azione si protrae � no all’impugnatura che è in sughero naturale, il porta mulinello è ad anelli in graphite. Speci� ca per la pesca al corego-ne

Carbon � bre rod specially designed for casting ultra-light lures. It provides a supple action that allows the blank to � ex all the way down to the cork handle. It features a ring-type graphite reel seat and comes with a choice of two � breglass tips. Suitable for lake white� sh.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370RD0125 1,25 58 7 2 9 80 1-10

Page 17: Canne Spinning

SPINNINGSPINNING

77

SPINNING

www.milo.it [email protected]

SPINNING

Canna di ottima fattura, in alto modulo di carbonio, telescopica, con ingombro ridotto. Estremamente curata in ogni particolare, monta pas-santi originali in SIC, porta mulinello a vite con inserto in legno ed impugnatura in sughero naturale a bassa porosità. L’azione versatile di cui di-spone, la rende un best-seller per gli estimatori di questa tecnica, che con questo tipo di attrezzo frequentano spesso luoghi disagevoli.

High modulus carbon telescopic rod with a very reduced packed travel length. Finely crafted and extremely accurate in every detail, the Ter-minator Spin is � tted with genuine SIC guides, screw reel seat with wood insert and low-porosity natural cork handle. The Terminator Spin has become very popular among spinning anglers, who can rely on its versatility to cope with the most di� cult � shing venues.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370TM0180370TM0210370TM0240

1,802,102,40

117140174

1113

14,5

678

678

555960

10- 4010- 4010- 40

Canna da spinning, telescopica, in carbonio alto modulo e dal ridottissimo ingombro. Questa prerogativa è data dal manico smontabile, che si innesta nel fusto per mezzo di uno spigot. Possiede un’azione ideale per arti� ciali medio – pesanti ed esprime anche una buona parabolicità, di� cilmente percepibile all’istante. Ha l’impugnatura in sughero e neoprene, il porta mulinello sagomato a vite ed è anellata con passanti SIC II a ponte medio. Fornita di custodia.

Range of telescopic spinning rods made from high modulus carbon. They feature a detachable handle that � ts to the blank via a spigot joint making these rods ultra compact. Designed for � shing medium to heavy lures, these rods provide a nice parabolic curve. They come � tted with a cork and neoprene handle, a moulded screw reel seat and medium-leg SIC II guides. Supplied with case.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370EG0165370EG0180370EG0210370EG0240370EG0270

1,65 L1,80 ML2,10 ML2,40 L2,70 L

110119135153178

9,511131416

899

1011

6789

10

37,537,537,54245

5-1510-3010-305-155-15

Pregevole canna da spinning, in versione telescopica, realizzata in carbonio alto modulo. Ideale proprio per tutti gli appassionati della pesca “di movimento”, vista la pezzatura corta ed il facile trasporto, si segnala per la duttilità d’azione, rapida e sensibile. E’ montata con gli anelli SIC II a ponte basso, impugnatura in sughero naturale più neoprene e porta mulinello sagomato a vite.

Superb telescopic spinning rod made from high modulus carbon. Quick and responsive, the Excel Spin is built on a short blank for ease of transport making it ideal for the roving angler. Comes � tted with short-leg SIC II guides, natural cork and neoprene handle and moulded screw reel seat.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370ET0190370ET0210370ET0240

1,902,102,40

150148164

111113

667

667

626265

10-3010-3010-30

Terminator Spin

Excel Telespin Travelling

Excel telespin

Page 18: Canne Spinning

SPINNING

www.milo.it [email protected]

SPINNING

È la classica canna multifunzione: la potenza di lancio e� ettiva spazia in varie grammature, rendendola e� cace in gran parte delle discipline dello spinning. È realizzata in segmenti telescopici in carbonio, corredati con anelli guida � lo a ponte doppio. Rapida e sensibile consente, grazie all’ingombro ridotto, un facile trasporto ovunque.

All-round rod o� ering a variety of casting powers to suit most spinning techniques. Features telescopic carbon sections and double-legged guides. Quick and sensitive, has a very reduced closed length which makes it very easy to transport in any situation.

Cod. Lungh. mt Peso gr Ø mm N° Sez. N° Anelli Ing. cm Casting gr370KN0165370KN0180

1,651,80

101122

9,512

56

45

5252

5-255-25

Kinetix Tele-Spinn