Canalis offer presentation

Canalis offer presentationPower LV Marketing BuswayFeb. 2011

Schneider Electric 2- Power LV Busway – S. Mangel – Feb. 2011

Agenda

●The Canalis concept ?

●Applications

●Offer

Canalis Concept


Centralized & decentralized distributions

Centralized distribution Decentralized distribution


Power pack

Fire barrier

Line lengths

Devices for wall-mounting or suspension

Connectors and tap-off units

Closing end piece

Directional change

Trunking support

Canalis is a complete and coherent prefabricated busbar trunking system

The Canalis concept


Study without detailed knowledge of the installation

Adding, moving or replacing loads can be done quickly

Tap-off unit can be prepared in workshop to reduce the time on site

An innovative concept


Busbar trunking, tap-off units, circuit breaker & switchboards are fully

CoordinatedCompliant with IEC 60439-1/2 Factory-tested

And in addition:●High degree of protection IP55 ●Halogen free (no PVC)●Low combustible load● Inherent fire barrier●Without hazardous substances

A factory-tested concept

In the event of a fire, the busbar trunking does not emit any gas or toxic smoke

Applications


For all markets

●Automotive industry, industrial plants…●Office buildings, hospitals… ●Shopping centers, airports, exhibition centers…●Data centers…●Petrochemical plants…●Shipyards…


For horizontal electrical distribution

Link between transformer and switchboards

Horizontal distribution

Transport

Lighting


Or for vertical rising main

Links

Vertical distribution

Lighting


Low voltage complete offer

Offer


Canalis KDP20 A flexible busbar trunking

● Installation● In false ceiling when lights are

supported by building● In false floor as power sockets

● Tap-off centre-distances● In accordance with building

construction standards● Prefabricated cords to supply

a number of light from a single connector

● Degree of protection● IP55


Canalis KBA/KBB25-40 A rigid busbar trunking

● Dedicated to installations● Allowing large fastening

centre-distances● Heavy or numerous light fittings

● 1 or 2 circuits allowing● Twice the number

of lighting circuits● Creation of a circuit

for power sockets● Manage lighting by zones● Combination of lighting

and emergency lighting

● Degree of protection● IP55


Common tap-off units for KBA, KBB, KDP

● For instantaneous connection of electrical devices to the Canalis system:● On-load operation● PE connected before phase and neutral● Load balancing of 3-phase distribution by phase selection● Locking onto the Busway tap-off point

10A 2-pole connectors with phase selection

10A 2-pole connectors,direct connection

16A 2-pole or 4-pole connectors (option T)

10A single-phase connectors for lighting control

34


Canalis KN from 40 to 160 A

●Tap-offs by circuit-breaker or fuse units up to 160 A

●Aluminium conductors with silvered copper contacts

●Flat mounting on suspended edges or wall-mounted

●Color white RAL 9001

●Directional changes

●Degree of protection IP55


Canalis KS from 100 to 1000 A

●Tap-offs units disconnectable on-load

●Tap-offs by circuit-breaker or fuse units up to 400 A

●Mechanical and electrical jointing with expansion system

●Aluminium conductors with silvered copper contacts

●Color white RAL 9001●Degree of protection IP55


Canalis KT800A to 5000Aaluminium or copper IP55


A large range of tap-off units

Plug-in tap-off units from 25 to 630 A Fixed tap-off units 400 to 1250 A Circuit-breakers or fuses protectionMonitoring and metering options

Contact excellenceThe silver-plated electrical contacts guarantee life long performance levels

The same range as for medium power KS as for high power KT

Documents

Canalis offer presentation