Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
BUTTERFLIES AND PATCHWORK
WELCOME to our 2017 Quilter’s Quest Block of the Month! This year we are doing it a little bit
differently. You will receive all clues and directions for completion BEFORE QQ 2017 begins.
The blocks used are all 9” squares. This project can be completed as a lap quilt, table runner, bed
runner, or wall hanging. You could use the blocks individually and turn them into a tote, pillows,
placemats, etc. Quilter’s Quest chose to use black and white for our sample and added ten solid colors
as accents, but your blocks could certainly be created in any color way.
FABRIC NEEDED TO COMPLETE AS LAP QUILT:
• 2½ yards of white or background fabric
• ¼ yard each of 5 different "Medium Greys" (equal amounts of black & white)
• ¼ yard each of 5 different "Blacks" (mostly black with very little white)
• ¼ yard each of 5 different “Whites” (mostly white with very little black)
• 1 WOF x 3⅛" strips (or 3⅛" squares) of each color, 10 colors total
• ¼ yard of a coordinating fabric for the binding
The following directions use traditional rotary cutting and as well as the AccuQuilt GO! or AccuQuilt
GO BIG! Machines, and the GO! Qube Mix & Match 9” Block and GO! Qube 9” Block Companion Set
Classics. Again, you may follow our color pallet or your own.
BLOCK 5 - Sculpture
From the “White” fabric cut:
(2) 2¾” squares
(1) 3⅛" square and then subcut diagonally into (2)
half square triangles (HST)
(Reference for all HST diagonal cuts)
BLOCK 10 - Sculpture
From the “White” fabric cut:
(2) 2¾” squares
(1) 3⅛" square and then subcut diagonally into (2)
half square triangles (HST)
(Reference for all HST diagonal cuts)
From the “Black” fabric cut:
(4) 2¾” x 5” rectangles. Make a “Chisel” shape with
right sides up (RSU) by measuring from the top
right hand side corner ½” to the left and mark. Then
measure from the bottom left hand side corner 2¾”
up and mark. Align your ruler with these two marks
(diagonally) and trim off the top left hand side
corner.
(Chisel)
From the “Grey” fabric cut:
(2) 2¾” squares
(2) 2¾” x 5” rectangles.
From the Orange fabric strip cut:
(1) 3⅛" square and then subcut diagonally into (2)
HSTs
Assembly Instructions:
Sew pieces together in quadrants and press seams
flat to achieve minimum bulk.
1. Pin and sew (1) Orange 3⅛” HST and (1) Black
Chisel together as shown. Make (2) Orange/Black
Chisel units.
(Completed Chisel Block)
2. Pin and sew (1) Orange/Black Chisel unit to a Grey
2¾” x 5” Rectangle. Make (2) of these units.
From the “Grey” fabric cut:
(4) 2¾” x 5” rectangles. Make a “Chisel” shape with
right sides up (RSU) by measuring from the top
right hand side corner ½” to the left and mark. Then
measure from the bottom left hand side corner 2¾”
up and mark. Align your ruler with these two marks
(diagonally) and trim off the top left hand side
corner.
(Chisel)
From the “Black” fabric cut:
(2) 2¾” squares
(2) 2¾” x 5” rectangles.
From the Purple fabric strip cut:
(1) 3⅛" square and then subcut diagonally into (2)
HSTs
Assembly Instructions:
Sew pieces together in quadrants and press seams
flat to achieve minimum bulk.
1. Pin and sew (1) Purple 3⅛” HST and (1) Grey Chisel
together as shown. Make (2) Purple/Black Chisel
units.
(Completed Chisel Block)
2. Pin and sew (1) Purple/Grey Chisel unit to a Black
2¾” x 5” Rectangle. Make (2) of these units.
3. Pin and sew (1) light White 3⅛" HST and one Black
Chisel together as shown. Make (2) White/Black
Chisel units.
4. Pin and sew (1) Grey and one White 2¾” Square
together as shown. Make (2) Square units.
5. Pin and sew (1) White/Black Chisel unit and (1)
Grey/White Square unit together into a Quarter
block as shown. Make (2) Square Quarter block
units.
6. Lay out (2) Orange/Black Chisel Quarter block
units and (2) Square Quarter block units as shown.
Pin and sew into Half blocks as shown. Make (2)
Half Blocks.
3. Pin and sew (1) light White 3⅛" HST and one Grey
Chisel together as shown. Make (2) White/Grey
Chisel units.
4. Pin and sew (1) White and one Black 2¾” Square
together as shown. Make (2) Square units.
5. Pin and sew (1) White/Grey Chisel unit and (1)
White/Black Square unit together into a Quarter
block as shown. Make (2) Square Quarter block
units.
6. Lay out (2) Purple/Black Chisel Quarter block units
and (2) Square Quarter block units as shown. Pin
and sew into Half blocks as shown. Make (2) Half
Blocks.
7. Pin and sew Half blocks together to complete the
block as shown. Press seams for less bulk.
7. Pin and sew Half blocks together to complete the
block as shown. Press seams for less bulk.
GO! Sculpture
9" Block Pattern
Finished Block Size 9" x 9"
For use with GO! Qube™ Mix & Match 9" Block (55777)
and GO! Qube™ 9" Companion Set-Classics (55781)
Fabric Shape & # GO! Dies Used Number of Fabric
Color Shapes to Cut Required for
One Block
Pink 9 GO! Chisels-2¼" x 4½" Finished 2 1/4 yard
(55735) Note: Cut chisels
fabric wrong side up
Dark 2 GO! Square-2¾" 2 1/4 yard
Pink (2¼" Finished) (55717)
Dark 8 GO! Rectangle-2¾" x 5" 2 Yardage
Pink (2¼" x 4½" Finished) (55722) included
above
Light 5 GO! Half Square Triangle-2¼" 2 1/4 yard
Green Finished Square (55719)
Light 2 GO! Square-2¾" 2 Yardage
Green (2¼" Finished) (55717) included
above
Green 5 GO! Half Square Triangle-2¼" 2 1/4 yard
Finished Square (55719)
Green 9 GO! Chisels-2¼" x 4½" Finished 2 Yardage
(55735) Note: Cut chisels included
fabric wrong side up above
Block Sewing Directions
1. Pin and sew one green 2¼" finished half square
triangle (HST) and one pink chisel together as
shown. Press seam toward the green triangle. Make
two pink chisel units.
©2016 AccuQuilt PQ10810Q
2. Pin and sew one dark pink 2¼" x 4½" finished
rectangle and one pink chisel unit together into a
quarter block as shown. Press seam toward the dark
pink rectangle. Make two pink chisel quarter block
units.
3. Pin and sew one light green 2¼" finished HST and one
green chisel together as shown. Press seam toward
the light green triangle. Make two green chisel units. 4. Pin and sew one dark pink and one light green 2¼"
finished squares together as shown. Press seam
toward dark pink square. Make two square units. 5. Pin and sew one green chisel unit and one square
unit together into a quarter block as shown. Press
seam toward the square unit. Make two square
quarter block units. 6. Lay out two pink chisel quarter block units and two
square quarter block units as shown. 7. Pin and sew into half blocks. Press seams in
alternating directions for each half block. Make two
half blocks.
8. Pin and sew half blocks together to complete the Alternate Four Block Option
block. Press seam open.
TIPS: Combine with other GO! Qube Mix & Match 9"
Quilt Blocks such as Flying Birds or Louisiana.
©2016 AccuQuilt PQ10810Q PQ10922Q