Brocade Certified vRouter Engineer - GRATIS EXAM · Brocade Certified vRouter Engineer Number : 170-010 Passing Score : 800 Time Limit : 120 min File Version : 1.0

http://www.gratisexam.com/

Brocade Certified vRouter Engineer

Number: 170-010Passing Score: 800Time Limit: 120 minFile Version: 1.0



Exam A

QUESTION 1Which command will display information about when your license expires?

A. show entitlement B. show system image C. show license D. show system commit

Correct Answer: ASection: (none)Explanation

Explanation/Reference:

QUESTION 2You are concerned that you may be running out of disk space on a Brocade Vyatta vRouter. Which command will confirm this?

A. show system storage B. show system image C. show system disk D. show system /dev/sda1



QUESTION 3You are experiencing slow system throughput and suspect that you are running out of system memory. Which command would you use to confirm this?

A. show system buffers


B. show system kernel - messages C. show system memory D. show system processes

Correct Answer: CSection: (none)Explanation


QUESTION 4Which command will display the revision of software installed?

A. show entitlement B. show system image C. show revision D. show version

Correct Answer: DSection: (none)Explanation


QUESTION 5A user has readwrite access to a Brocade Vyatta vRouter. Which two commands will display the current device configuration? (Choose two.)



A. vyatta@vyatta:~$ show configuration B. vyatta@vyatta# show C. vyatta@vyatta# sh conf D. vyatta@vyatta# show config

Correct Answer: ABSection: (none)Explanation


QUESTION 6Which key do you use for CLI command completion?

A. ! B. tab C. space D. right arrow

Correct Answer: BSection: (none)Explanation


QUESTION 7Which three statements about the configuration file are true? (Choose three.)

A. The file is organized hierarchically. B. The file is named config.boot. C. The system only supports one active configuration file. D. You cannot delete the file. E. The file is encrypted.

Correct Answer: ABCSection: (none)


Explanation


QUESTION 8You are using the ?key for more information regarding this command: vyatta@vyatta:~$ show ip ospf? What will be the result?

A. ospf B. Invalid command C. A list of options for show ip ospf D. Command complete. Press <Enter> to execute command.



QUESTION 9Which two show commands will confirm that a device is receiving OSPF external routes? (Choose two.)

A. ip ospf database B. ip route C. ip ospf interface D. ip ospf neighbors



QUESTION 10


Which command disables hello packets on an OSPF interface?


A. set protocols ospf parameters passive - interface <name> B. set protocols ospf passive - interface <name> C. set interface <name> ip ospf passive D. set interface <name> ip ospf disable hellos



QUESTION 11Which command line will configure the OSPF router ID?

A. edit protocols ospf B. edit protocols ospf area <n> C. edit protocols ospf parameters D. edit protocols ospf options



QUESTION 12When configuring single area OSPF, which area number should you use?


A. 0B. 1C. 2D. 10



QUESTION 13Which term describes a single port on an Ethernet switch?

A. collision domain B. broadcast domain C. subnet D. full duplex domain



QUESTION 14You want to capture all traffic traversing an Ethernet switch on your workstation for protocol monitoring. What must you do?

A. Connect your workstation to a VLAN trunk port on the switch. B. Place the card on your workstation into promiscuous mode. C. Connect your workstation to an analyzer port on the switch. D. Configure the switch to forward all traffic to your switch port.

Correct Answer: C


Section: (none)Explanation


QUESTION 15Which three configuration parameters are auto detected on a vRouter Ethernet port? (Choose three.)

A. speed B. mac C. hw-id D. mtu E. duplex

Correct Answer: ACESection: (none)Explanation


QUESTION 16VLAN 10 is configured on ethernet 0. Which command line will display operational statistics for the VLAN?

A. show interfaces ethernet eth0 B. show interfaces ethernet eth0.10 C. show interfaces ethernet eth0 vif 10 D. show interfaces ethernet eth0 statistics




QUESTION 17Which term is a definition of a VLAN?

A. a collision domain B. a broadcast domain C. a routing domain D. a switching domain



QUESTION 18VLAN tagged frames are visible on which ports on a switch?

A. workstation B. trunk C. server D. VLAN



QUESTION 19Which two statements regarding Ethernet link aggregation are true? (Choose two.)

A. You can combine links of different speeds. B. All links in the aggregate group must be up for the interface to be up. C. If you delete a bonding interface, all configuration information related to that bond interface is also deleted. D. You can configure multiple IP addresses and VIFs on a bondin


Correct Answer: ADSection: (none)Explanation


QUESTION 20Which two statements regarding Ethernet link aggregation are true? (Choose two.)

A. Aggregated links must be the same speed. B. The interface will stay up even if a link in the aggregate group fails. C. If you delete a bonding interface, all configuration information related to that bond interface is also deleted. D. You can configure multiple IP addresses on a bonding interfa

Correct Answer: BDSection: (none)Explanation


QUESTION 21What are two characteristics of UDP? (Choose two.)


A. connectionless B. uses sequence numbers C. uses a sliding window for flow control D. no congestion control

Correct Answer: AD


Section: (none)Explanation


QUESTION 22What is the purpose of the TCP three way handshake?

A. to establish a reliable connection between two network peers B. to exchange information about transmission windows C. to determine the Layer 4 ports used for the connection D. to set the priority for handing the data exchange



QUESTION 23What are three characteristics of TCP? (Choose three.)

A. connectionless B. uses sequence numbers C. uses a sliding window for flow control D. no congestion control E. retransmission of missing/bad segment

Correct Answer: BCESection: (none)Explanation


QUESTION 24Given the address 172.16.99.1 and a mask of 255.255.252.0, what is the subnet number?


A. /20 B. /22 C. /26 D. /38



QUESTION 25give the address 172.16.99.65 and mask of 255.255.240.0 what is the subnet number

A. /20B. /26C. /28D. /32



QUESTION 26What is the maximum number of domain names a vRouter can advertise using Dynamic DNS?

A. 8 B. 63 C. 255 D. unlimited

Correct Answer: DSection: (none)


Explanation


QUESTION 27

What do you need to configure to meet the translation requirements shown?

A. three source NAT rules using the exclude parameter B. one source NAT rule using the ! parameter C. three-source NAT rules using the ! parameter D. one source NAT rules using the include parameter




QUESTION 28Which two steps are required to enable logging of NAT traffic? (Choose two.)

A. Enable logging of the NAT rule. B. Enable logging of the NAT rulebase. C. Ensure there is sufficient disk space for potential logged information. D. Enable debug-level logging on the device.

Correct Answer: ACSection: (none)Explanation


QUESTION 29What information does a router need to add an entry to its routing table? (Choose two.)

A. IP address of the next-hop router B. destination network and mask C. destination IP address D. MAC address of next-hop router



QUESTION 30Which two statements about static routes are true? (Choose two.)

A. Static routes require no maintenance. B. Static routes and dynamic routing cannot be used together. C. Static routes are less CPU-intensive than dynamic routes. D. Static routes are simple to configure.


Correct Answer: CDSection: (none)Explanation


QUESTION 31Which command line will display configured static routes only?

A. show ip route static B. show route static C. show static route D. show ip route filter static



QUESTION 32You want to configure a backup static route for a route learned through OSPF. What is the lowest value you can use for administrative distance for this to work?

A. 1B. 2C. 110D. 120



QUESTION 33


If all interfaces are active, which route would be preferred?

A. 10.1.1.0/24, administrative distance 110, learned through OSPF B. 10.1.1.0/24, administrative distance 10, static route C. 10.1.1.0/24, administrative distance 120, static route D. 10.1.1.0/24, administrative distance 100, learned through OSPF



QUESTION 34Which operation allows a firewall to understand complex protocols and pass related traffic automatically?

A. statefulness B. application layer gateway C. access list D. allow related traffic



QUESTION 35You've configured a destination port in your firewall rule. Which two additional elements are required in the rule? (Choose two.)



A. source port B. action C. protocol D. destination address

Correct Answer: BCSection: (none)Explanation


QUESTION 36Which two elements are required in a firewall rule? (Choose two.)

A. source address B. destination address C. number D. action



QUESTION 37Which command displays the headers of packets matching firewall rules?


A. show firewall | match name <name> B. show firewall statistics C. show firewall name <name> D. show log | match fw name



QUESTION 38Which three commands can display rule details, such as protocols and ports? (Choose three.)

A. show firewall B. show firewall name <name> C. show firewall statistics D. show firewall name <name> statistics E. show firewall name <name> rule <num>

Correct Answer: ABESection: (none)Explanation


QUESTION 39Which three commands display whether a firewall rule has been matched by traffic? (Choose three.)

A. show firewall B. show log C. show firewall name <name> statistics D. show firewall statistics E. show firewall log


Correct Answer: ACDSection: (none)Explanation


QUESTION 40Which three commands should be used to modify a firewall rulebase? (Choose three.)

A. edit B. set C. rename D. delete E. modify

Correct Answer: BCDSection: (none)Explanation


QUESTION 41vyatta@training:~$ show system commit 0 2013-05-03 21:07:54 by root via boot-configloader 1 2013-05-03 00:05:32 by vyatta via cli 2 2013-05-02 23:15:23 byvyatta via cli32013-04-08 17:57:48 by root via boot-config-loader 4 2013-03-12 18:08:45 by vyatta via cli 5 2013-01-22 22:56:04 by vyatta via cli 6 2012-11-0402:36:36 by root via boot-fig-loader 7 2012-10-12 16:15:36 by vyatta via cli 8 2012-10-11 16:23:08 by vyatta via cli 9 2012-9-10 18:51:06 by vyatta via cli 10 2012-09-04 23:56:28 by vyatta via cli 112012-08-31 23:25:35 by vyatta via cli 12 2012-08-31 23:08:05 by vyatta via cli 13 2012-08-31 23:07:32 by vyatta via cli 14 2012-08-31 23:06:56 by vyatta via cli 15 2012-08-103:38:53 by vyatta via cli 16 2012-08-31 03:37:15 by vyatta via cli 17 2012-08-31 03:03:53 by vyatta via cli 18 2012-06-22 04:58:47 by vyatta via cli 19 2012-06-20 19:48:08by vyatta via cli vyatta@training:~$ Which two configuration elements are required in a source NATmasquerade rule? (Choose two.)

A. source address B. protocol C. translation address D. outbound interface

Correct Answer: CDSection: (none)


Explanation


QUESTION 42Which two elements are required in a source NAT rule? (Choose two.)

A. set source address <ip addr> B. set translation address [<ip addr> | masquerade] C. set protocol number D. set outbound-interface <interface>



QUESTION 43You have configured a destination port in your NAT rule. Which two additional elements are required in the rule? (Choose two.)

A. source port B. translation address C. source address D. protocol



QUESTION 44Which statement about NAT is true?


A. You have to configure NAT in both directions in order for translation to work properly. B. NAT states can be maintained between redundant vRouter devices. C. You must configure a separate NAT rule list for each direction of NAT traffic. D. You must configure a separate NAT rules list for each interface you want to use for NAT.



QUESTION 45Your device receives a mail packet from host 10.1.1.1 to 1.2.3.4 on port eth0.


Which rule will the packet match?

A. 10B. 20C. 30D. 40




QUESTION 46Your device is about to transmit a mail packet from host 172.24.42.99 to destination 2.3.4.5 on eth0.


Which rule will the packet match?

A. 10B. 20C. 30


D. 40



QUESTION 47Which two show commands will verify that a Brocade Vyatta vRouter upgrade completed successfully? (Choose two.)

A. configuration B. version C. system image D. entitlement



QUESTION 48When verifying a new Brocade Vyatta vRouter installation on a hypervisor, which action must be taken with the configuration file?

A. You must verify that the install process found all of the device interfaces. B. You must verify the hardware addresses of the device interfaces. C. You must confirm the root login and password. D. You must confirm the administrator login and password.




QUESTION 49You are running a Brocade Vyatta vRouteras a virtual machine, and the upgrade system image command tells you that you must perform a manual upgrade. Which three steps are part of the manual upgrade process? (Choose three.)

A. Copy the new template to your VM hypervisor. B. Save the current configuration to an external location. C. Enter the add system image command. D. Delete the MAC addresses for all interfaces. E. Delete the hardware IDs for all interfaces

Correct Answer: ABESection: (none)Explanation


QUESTION 50Which two elements must be configured on your Brocade Vyatta vRouter to use the upgrade system image command? (Choose two.)

A. an active IP interface B. a system DNS server C. your Brocade support credentials D. your Brocade Vyatta repository credentials



QUESTION 51Which two elements must you configure in your Brocade Vyatta vRouter to register your software license? (Choose two.)


A. service assignment B. repository username/password C. license key D. entitlement key



QUESTION 52Some of your internal users are complaining that they can't get to the mail server at 10.6.7.22.

Looking at the firewall rulebase in the exhibit, what is the problem?

A. You don't have a rule allowing traffic to the host at 10.6.7.22. B. Rule 20 blocks traffic from an internal subnet to hosts on 10.6.7.0/24. C. No traffic has matched rule 30. D. You don't have a rule allowing mail traffic to subnet 10.6.7.0/24.




QUESTION 53Your device is about to transmit a packet from host 10.1.1.1 to destination 172.16.22.33.

What will be the source address after the packet is transmitted?


A. 172.24.42.51 B. 1.2.3.4 C. 172.24.42.99 D. 10.1.1.1



QUESTION 54Which two steps are required to enable logging of firewalled packets? (Choose two.)

A. Enable logging on the firewall rulebase. B. Enable logging on the firewall rule. C. Enable sufficient disk space for any potential logged information. D. Enable debug level logging on the device.



QUESTION 55Which show command displays the most recent entries in the local device log?

A. show log tail B. show log end C. show log 10 D. show log | grep <today's date>




QUESTION 56Which command line displays the output of an OSPF protocol monitoring session on your screen?

A. set system syslog facility console level debugging B. show log C. debug protocol ospf D. monitor protocol ospf enable



QUESTION 57Which two command lines can you use to search the Brocade Vyatta vRouter log files? (Choose two.)

A. show log | grep <string> B. show log | match <string> C. search log <string> D. more s <string> log



QUESTION 58When you enable OSPF protocol monitoring, where is the protocol data stored?


A. in /var/log/messages B. in the protocol log C. in /syslog/logs D. on the syslog server



QUESTION 59By default, what information is stored in the Brocade Vyatta vRouter system log? (Choose two.)

A. firewall information B. NAT information C. interface state information D. system state information



QUESTION 60You are configuring a static route to the Internet on RouterA:


What is the correct next hop address?


A. 172.16.1.1 B. 172.16.1.2 C. 192.168.42.2 D. 192.168.42.1



QUESTION 61 vyatta@Vyatta1:~$ show firewall name PublicServers statistics IPv4 Firewall "PublicServers": Active on (eth0,IN) rule packets bytes action source destination 10 210 15960 ACCEPT 10.2.3.0/24 10.6.7.0/24 20 40827 2731049 ACCEPT 10.4.5.0/24


10.6.7.0/24 30 69381 4192375 REJECT 10.4.5.0/24 10.6.7.0/24 40 89538 5366257 ACCEPT 0.0.0.0/0 10.6.7.0/24 10000 82866 5289591 DROP 0.0.0.0/0 0.0.0.0/0 Based on the output shown, which statement is true about this firewall configuration?

A. This configuration is correct. B. Rules 20 and 30 are capturing the same traffic. C. Rule 30 must be at the top of the list. D. This configuration is invalid.



QUESTION 62 vyatta@vyatta:~$ show system login users Username Type Tty From Last login operator vyatta hvc0 Mon Jun 17 18:34:25 2013 vyatta vyatta pts/0 10.224.7.101 Wed Jun 19 20:47:39 2013 vyatta@vyatta:~$ Based on the output, which statement is true?

A. User operator last connected through the device console. B. User vyatta is currently logged in to the system. C. User vyatta last connected using SSH. D. User operator has read only privileges.



QUESTION 63 vyatta@vyatta:~$ show system image The system currently has the following image(s) installed:


1: VSE6.5R3 (default boot) (running image) 2: VSE6.4-2012.08.04 3:VSE6.4-2012.04.30 4: VSE6.4-2012.03.27 5: VSE6.3-2011.08.31 vyatta@vyatta:~$ Based on the output, which two statements about this Brocade Vyatta vRouter aretrue? (Choose two.)

A. The device is not a vRouter virtual machine. B. The device has been upgraded five times. C. The device is booting software version 6.5. D. The device was upgraded last on 20120804.

Correct Answer: ACSection: (none)Explanation


QUESTION 64vyatta@training:~$ show system commit 0 2013-05-03 21:07:54 by root via boot-config-loader 1 2013-05-03 00:05:32 by vyatta via cli 2 2013-05-02 23:15:23 byvyatta via cli3 2013-04-08 17:57:48 by root via boot-config-loader 4 2013-03-12 18:08:45 by vyatta via cli 5 2013-01-22 22:56:04 by vyatta via cli 6 2012-11-0402:36:36 by root via boot-onfig- 012-10-12 16:15:36 by vyatta via cli 8 2012-10-11 16:23:08 by vyatta via cli 9 2012-09-10 18:51:06 by vyatta via cli 10 2012-09-0423:56:28 by vyatta via cli 11 2012-08-123:25:35 by vyatta via cli 12 2012-08-31 23:08:05 by vyatta via cli 13 2012-08-31 23:07:32 by vyatta via cli 14 2012-08-3123:06:56 by vyatta via cli 15 2012-08-31 03:38:53by vyatta via cli 16 2012-08-31 03:37:15 by vyatta via cli 17 2012-08-31 03:03:53 by vyatta via cli 18 2012-06-2204:58:47 by vyatta via cli 19 2012-06-20 19:48:08 byvyatta via cli vyatta@training:~$ Based on the output, which two statements about this Brocade Vyatta vRouterare true? (Choose two.)

A. This vRouter has been upgraded three times B. The administrator vyatta has read write privileges to the device. C. The last changes made to the device were made by the administrator vyatta. D. The last changes saved on this system were saved on 20130503.




QUESTION 65 vyatta@VYA1:~$ show ip ospf neighbor OSPF process 0: Neighbor ID Pri State Dead Time Address Interface 192.168.131.2 1 Full/Backup 00:00:38 192.168.12.2eth2 192.168.163.3 1Init/DROther 00:00:33 192.168.13.3 eth3 vyatta@VYA1:~$ 10.1.16 vyatta@VYA1:~$ show ip ospf database OSPF Router with ID(172.24.42.51) (Process ID 0) Router Link States (Area0.0.0.0) Link ID ADV Router Age Seq# CkSum Link count 172.24.42.51 172.24.42.51 167 0x800000080xa98e 3 172.24.42.52 172.24.42.52 166 0x80000006 0x21e7 3 172.24.42.53 172.24.42.53 6 0x8000000b 0x7854 3 172.24.42.54 172.24.42.54 7 0x800000030x1183 4 Net Link States (Area 0.0.0.0) Link ID ADV Router Age Seq# CkSum 192.168.12.1 172.24.42.51 327 0x80000002 0x92e8 192.168.13.3 172.24.42.5332 0x80000002 0x6d08 192.168.23.3 172.24.42.53 602 0x80000002 0x0d5d 192.168.160.3 172.24.42.5310 0x80000003 0x3e9f AS External Link States Link IDADV Router Age Seq# CkSum Route Tag 0.0.0.0 172.24.42.51 187 0x80000003 0x04a1 E2 0.0.0.0/0 254vvyatta@VYA1:~$ Which statement describes the statusshown in the output?

A. The device is exchanging link state information with the peer on eth3. B. The device has not formed an adjacency with the peer on eth3. C. The device is negotiating the designated router for eth3. D. The device is running the SPF algorithm.



QUESTION 66 Based on the output, vyatta@VYA1:~$ show ip ospf database OSPF Router with ID (172.24.42.51) (Process ID 0) Router Link States (Area 0.0.0.0) Link ID ADVRouter Age Seq#CkSum Link count 172.24.42.51 172.24.42.51 167 0x80000008 0xa98e 3 172.24.42.52 172.24.42.52 166 0x80000006 0x21e7 3 172.24.42.53172.24.42.53 6 0x8000000b 0x7854 3 172.24.42.54 172.24.42.54 7 0x80000003 0x1183 4 Net Link States (Area 0.0.0.0) Link ID ADV Router Age Seq# CkSum 192.168.12.1 172.24.42.51 327 0x80000002 0x92e8 192.168.13.3 172.24.42.53 32 0x80000002 0x6d08 192.168.23.3 172.24.42.53 602 0x80000002 0x0d5d192.168.160.3 172.24.42.53 10 0x80000003 0x3e9f AS External Link States LinkID ADV Router Age Seq# CkSum Route Tag 0.0.0.0 172.24.42.51 1870x80000003 0x04a1 E2 0.0.0.0/0 254 which router is advertising the default route?

A. 172.24.42.51 B. 172.24.42.52 C. 172.24.42.53


D. 172.24.42.54



QUESTION 67 vyatta@VYA1:~$ show ip route ospf O 192.168.12.0/24 [110/1] is directly connected, eth2, 00:07:36 O 192.168.13.0/24 [110/1] is directly connected, eth3, 00:07:36O *> 192.168.23.0/24110/2] via 192.168.12.2, eth2, 00:05:05 *> [110/2] via 192.168.13.3, eth3, 00:05:05 O 192.168.101.0/24 [110/1] is directly connected, eth1,00:07:36 O *> 192.168.128.0/24110/2] via 192.168.12.2, eth2, 00:05:53 O *> 192.168.129.2/32 [110/11] via 192.168.12.2, eth2, 00:05:53 O *> 192.168.130.2/32[110/11] via 192.168.12.2, eth2, 00:05:53 O*> 192.168.131.2/32 [110/11] via 192.168.12.2, eth2, 00:05:53 O *> 192.168.160.0/24 [110/2] via 192.168.13.3, eth3,00:05:05 O *> 192.168.161.3/32 [110/11] via 192.168.13.3, eth3,00:05:05 O *> 192.168.162.3/32 [110/11] via 192.168.13.3, eth3, 00:05:05 O *> 192.168.163.3/32[110/11] via 192.168.13.3, eth3, 00:05:05 vyatta@VYA1:~$ show ip route summary IProuting table name is Default-IP-Routing-Table(0) IP routing table maximum-paths is 8 Route Source Networks connected 7 static 1 ospf 9 Total 17 FIB 9 vyatta@VYA1:~$ With allroutingsettings at system defaults, which statement is trueabout the interface VYA1 will use to transmit traffic destined for 192.168.23.15?

A. Only interface Ethernet 2 will be used. B. Only interface Ethernet 3 will be used. C. The Brocade Vyatta device will loadbalance packet by packet out both Ethernet 2 and Ethernet 3. D. The Brocade Vyatta device will loadbalance session by session out both Ethernet 2 and Ethernet 3.



QUESTION 68 vyatta@VYA1:~$ show ip route Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2- OSPF NSSAexternal type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area > - selectedroute, * - FIB route, p - stale info Gateway of last resort is 172.24.42.1 to network 0.0.0.0 S *> 0.0.0.0/0 [1/0] via 172.24.42.1, eth0 C *> 127.0.0.0/8 is directlyconnected, lo C *> 172.24.42.0/24 is directly connected, eth0O 192.168.12.0/24 [110/1] is directly connected, eth2, 00:02:53 C *> 192.168.12.0/24 is directlyconnected, eth2 O 192.168.13.0/24 [110/1] is directly connected, eth3, 00:02:53 C *>192.168.13.0/24 is directly connected, eth3 O *> 192.168.23.0/24 [110/2] via


192.168.12.2, eth2, 00:01:31 *> [110/2] via 192.168.13.3, eth3, 00:01:31 O 192.168.101.0/24 [110/1] isdirectly connected, eth1, 00:02:53 C *> 192.168.101.0/24 isdirectly connected, eth1 O *> 192.168.128.0/24 [110/2] via 192.168.12.2, eth2, 00:01:10 O *> 192.168.129.2/32 [110/11] via192.168.12.2, eth2, 00:01:10 O *>192.168.130.2/32 [110/11] via 192.168.12.2, eth2, 00:01:10 O *> 192.168.131.2/32 [110/11] via 192.168.12.2, eth2, 00:01:10 O *> 192.168.160.0/24110/2] via192.168.13.3, eth3, 00:01:31 O *> 192.168.161.3/32 [110/11] via 192.168.13.3, eth3, 00:01:31 O *> 192.168.162.3/32 [110/11] via 192.168.13.3, eth3, 00:01:31 O*>192.168.163.3/32 [110/11] via 192.168.13.3, eth3, 00:01:31 vyatta@VYA1:~$ Which three routes will the device originate into the OSPF network? (Choose three.)

A. 0.0.0.0/0 B. 172.24.42.0/24 C. 192.168.12.0/24 D. 192.168.13.0/24 E. 192.168.101.0/24

Correct Answer: CDESection: (none)Explanation


QUESTION 69 vyatta@VYA1:~$ show ip route ospf O 192.168.12.0/24 [110/1] is directly connected, eth2, 00:07:36 O 192.168.13.0/24 [110/1] is directly connected, eth3, 00:07:36O *> 192.168.23.0/24110/2] via 192.168.12.2, eth2, 00:05:05 *> [110/2] via 192.168.13.3, eth3, 00:05:05 O 192.168.101.0/24 [110/1] is directly connected, eth1,00:07:36 O *> 192.168.128.0/24110/2] via 192.168.12.2, eth2, 00:05:53 O *> 192.168.129.2/32 [110/11] via 192.168.12.2, eth2, 00:05:53 O *> 192.168.130.2/32[110/11] via 192.168.12.2, eth2, 00:05:53 O*> 192.168.131.2/32 [110/11] via 192.168.12.2, eth2, 00:05:53 O *> 192.168.160.0/24 [110/2] via 192.168.13.3, eth3,00:05:05 O *> 192.168.161.3/32 [110/11] via 192.168.13.3, eth3,00:05:05 O *> 192.168.162.3/32 [110/11] via 192.168.13.3, eth3, 00:05:05 O *> 192.168.163.3/32[110/11] via 192.168.13.3, eth3, 00:05:05 vyatta@VYA1:~$ show ip route summary IProuting table name is Default-IP-Routing-Table(0) IP routing table maximum-paths is 8 Route Source Networks connected 7 static 1 ospf 9 Total 17 FIB 9 vyatta@VYA1:~$ Based on theoutput, what is the reason not all OSPF routes havebeen added to the FIB?

A. The missing OSPF routes have been flagged for removal. B. VYA1 is not advertising the missing OSPF routes. C. The missing OSPF routes are directly connected. D. The OSPF process needs to rerun the SPF algorithm to discover the missing routes.




QUESTION 70 vyatta@VYA1# show int eth eth0 address 172.16.32.99/24 duplex auto hw-id 00:0c:29:bf:5c:1b smp_affinity auto speed auto [edit] vyatta@VYA1# Which twocommands will activate OSPF on the interface shown? (Choose two.)

A. set protocols ospf area 0 network 172.16.0.0/16 B. set protocols ospf area 0 network 172.16.32.0/24 C. set protocols ospf area 0 network 172.16.32.99/32 D. set protocols ospf area 0 network 172.16.32.99/24



QUESTION 71 vyatta@vyatta:~$ show interfaces Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down Interface IP Address S/L Description eth0 172.24.42.52/24 u/u eth1 192.168.12.2 /24 u/u192.168.129.2/24 192.168.130.2/24 192.168.131.2/24 eth2 192.168.23.2/24 u/u eth3 192.168.128.2/24 u/u eth3.10 192.168.132.2/24eth3.20 192.168.133.2/24 vyatta@vyatta:~$ Which interface has VLANs associated with it?

A. eth0 B. eth1 C. eth2 D. eth3




QUESTION 72 vyatta@vyatta:~$ show interfaces Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down Interface IP Address S/L Description eth0 172.24.42.51/24 u/u eth1192.168.101.1/24 u/ueth2 192.168.12.1/24 u/u eth3 192.168.13.1/24 u/D lo 127.0.0.1/8 ::1/128 vyatta@vyatta:~$ Based on the output, which two could be theproblem with eth3? (Choose two.)

A. The interface is not connected.B. The switch port is set to a different speed than the Ethernet port. C. The interface is connected, but has not discovered a valid MAC address. D. The interface has been administratively disabled.



QUESTION 73 vyatta@vyatta:~$ show interfaces Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down Interface IP Address S/L Description eth0 172.24.42.51/24 u/u eth1192.168.101.1/24 u/ueth2 192.168.12.1/24 u/u eth3 192.168.13.1/24 A/D lo 127.0.0.1/8 ::1/128 vyatta@vyatta:~$ Based on the output, what is the problem witheth3?

A. The interface is not connected. B. The switch port is set to a different speed than the Ethernet port. C. The interface is connected, but has not discovered a valid MAC address. D. The interface has been administratively disabled.




QUESTION 74

If you were to view a frame at the point indicated in the exhibit, what would the source MAC address be?

A. 1122:3344:5566 B. 1122:3377:8899 C. 1122:33dd:eeff D. ffee.dd11.2233



QUESTION 75Data is being transmitted from host A to host B.


If you were to capture a frame at the point indicated in the exhibit, what would the source MAC address be?

A. 1122:33aa:bbcc B. 1122:3344:5566 C. 1122:3377:8899 D. ffee:ddcc:bbaa



QUESTION 76Data is being transmitted from host A to host B.


If you were to view a frame at the point indicated in the exhibit, what would the destination IP address be?

A. 10.1.1.1 B. 10.2.2.2 C. 10.3.3.1 D. 10.3.3.10



QUESTION 77vyatta@vyatta:~$ show dhcp server leases IP address Hardware Address Lease expiration Pool Client Name 10.224.7.40 00:04:f2:02:84:49 2013/06/22 17:46:20ClientLAN 10.224.7.41d4:be:d9:1b:ed:9e 2013/06/22 20:27:26 ClientLAN PC-HR-34 vyatta@vyatta:~$ show interfaces Codes: S - State, L - Link, u - Up, D Down, A - Admin Down Interface IPAddress S/L Description eth0 192.168.200.254/24 u/u eth1 192.168.100.1/24 u/u eth2 10.224.7.1/25 u/u eth3 172.24.42.1/24 u/u lo 127.0.0.1/8 u/u ::1/128 Based on the output shown,which statement is true?

A. DHCP is configured on eth2. B. PCHR34 is the first device connected to eth2.


C. The pool named ClientLAN has 11 total addresses. D. The lease interval is 24 hours.



QUESTION 78 vyatta@vyatta:~$ show dhcp server leases IP address Hardware Address Lease expiration Pool Client Name 10.224.7.40 00:04:f2:02:84:49 2013/06/22 17:46:20ClientLAN 10.224.7.41d4:be:d9:1b:ed:9e 2013/06/22 20:27:26 ClientLAN PC-HR-4 vyatta@vyatta:~$ show dhcp server statistics pool pool size # leased # avail ClientLAN 11 2 9 vyatta@vyatta:~$ Based on the output shown, which statement is true?

A. The address lease interval is 24 hours. B. 10.224.7.40 is the first address in the pool named Windows. C. The pool named ClientLAN has 11 total addresses. D. PCHR34 is connected directly to the vRouter.



QUESTION 79 Your eth1 interface is connected to an ISP, but your user traffic is still not reaching the Internet. You suspect a problem with the DHCP lease. vyatta@vyatta:~$show dhcp client leasesinterface : eth1 ip address : 192.168.128.11 [Active] subnet mask : 255.255.255.0 router : 182.168.128.2 name server : 192.168.128.2 dhcpserver : 192.168.128.2 lease time : 86400last update : Wed Jun 19 00:06:00 GMT 2013 expiry : Thu Jun 20 00:06:00 GMT 2013 reason : BOUND vyatta@vyatta:~$ Which line in the output shows the problem?

A. ip address : 192.168.128.11 [Active] B. router : 182.168.128.2


C. lease time : 86400 D. reason : BOUND



QUESTION 80 vyatta@vyatta:~$ show dhcp client leases interface : eth1 last update : Wed Jun 19 00:06:00 GMT 2013 reason : FAIL vyatta@vyatta:~$ Based on the outputshown, which two statements are true? (Choose two.)

A. Interface eth1 is configured to acquire an address through DHCP. B. Interface eth1 has failed. C. Interface eth1 is disconnected. D. Interface eth1 does not have an IP address.

Correct Answer: ADSection: (none)Explanation


QUESTION 81 vyatta@vyatta:~$ show interfaces Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down Interface IP Address S/L Description eth0 172.24.42.52/24 u/u eth1192.168.12.2/24 u/ueth2 192.168.23.2/24 u/u eth3 192.168.128.2/24 u/u lo 127.0.0.1/8 u/u ::1/128 vyatta@vyatta:~$ show dns forwarding nameservers Nameservers configured for DNS forwarding 172.24.42.1 available via 'system' 216.134.160.13 available via 'system' Based on the output shown, which twostatements are true? (Choose two.)

A. The vRouter is forwarding DNS requests from users on interface eth0. B. The vRouter is using system configured DNS servers.


C. The vRouter is forwarding DNS requests on a roundrobin basis. D. DNS servers at 172.24.42.1 and 216.134.160.13 are responding to DNS requests.



QUESTION 82 vyatta@vyatta:~$ show dns forwarding statistics Cache statistics Cache size: 150 Queries forwarded: 20 Queries answered locally: 1 Total DNS entries insertedinto cache: 58 DNSentries removed from cache before expiry: 0 Nameserver statistics Server: 172.24.42.1 Queries sent: 20 Queries retried or failed: 0 Server:216.134.160.13 Queries sent: 5 Queriesretried or failed: 0 Based on the output shown, which two statements are true? (Choose two.)

A. The DNS forwarding cache is not full. B. The vRouter only has two DNS servers available for DNS forwarding. C. The server at 172.24.42.1 has a higher priority setting than the server at 216.134.160.13. D. DNS servers at 172.24.42.1 and 216.134.160.13 are responding to DNS requests.



QUESTION 83 vyatta@vyatta:~$ show ip route Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF, I - ISIS, B - BGP, > - selected route, * - FIB route S>*0.0.0.0/0 [1/0] via 10.1.1.1,eth0 C>* 127.0.0.0/8 is directly connected, lo S>* 192.168.12.0/24 [120/0] via 192.168.101.2, eth1 S> 192.168.12.0/24 [1/0] via192.168.103.3, eth3 Referring to the exhibit, whichthree statements are true? (Choose three.)

A. Interface eth3 is administratively disabled. B. The administrator has configured two static routes to network 192.168.12.0/24.


C. The route with the best administrative distance to network 192.168.12.0/24 is through eth3. D. The route through eth1 is a floating static route. E. Interface eth1 is administratively disabled.

Correct Answer: BCDSection: (none)Explanation


QUESTION 84 Your router has received a packet destined for host 192.168.12.2. vyatta@vyatta:~$ show ip route Codes: K - kernel route, C - connected, S - static, R - RIP, O -OSPF, I - ISIS, B - BGP,> - selected route, * - FIB route S>* 0.0.0.0/0 [1/0] via 10.1.1.1, eth0 C>* 127.0.0.0/8 is directly connected, lo O 192.168.12.0/24 [110/10]via 192.168.100.2, eth2, 01W1d21h S>*192.168.12.0/24 [1/0] via 192.168.101.2, eth1 C 192.168.12.0/24 is directly connected, eth3 O>* 192.168.23.0/24 [110/20]via 192.168.12.2, eth2 01w1d21h vyatta@vyatta:~$ Referringto exhibit, which route will be used to forward the packet?

A. S> 0.0.0.0/0 [1/0] via 10.1.1.1, eth1 B. S 10.1.2.0/24 [1/0] via 10.1.1.1, eth1 C. S> 10.1.2.0.24 [100/0] via 10.2.2.1, eth2 D. O 10.1.2.0/24 [110/20] via 10.2.2.1, eth2



QUESTION 85



A.B.C.D.

Correct Answer: Section: (none)Explanation


QUESTION 86



A.B.C.D.

Correct Answer: Section: (none)Explanation



Documents

Brocade Certified vRouter Engineer - GRATIS EXAM · Brocade Certified vRouter Engineer Number : 170-010 Passing Score : 800 Time Limit : 120 min File Version : 1.0