-
Product Communication:
Insect Screen 1
Insect Screen
-
Preamble :
Insect Screen 2
With Hfeles Retractable Pleated Insect screen you can retain
your view and the fresh air while you keep the bugs out. Our Insect
screens are simple to operate and can be stacked neatly away when
not in use. It is the only insect screen available in the market
which allows for a post-less corner application. The screen is
designed, made and patented in Australia by Brio. The insect screen
is available in 13 standard height ranges and 6 standard width
ranges which through various permutations and combinations results
in a total of 66 different insect screen kits. This product
communication introduces the New Hfele Insect Screen Selector which
displays the various height and width options and their MRPs. This
communication consists of the following details :
Introduction Page 3
Positioning and USPs Pages 4 & 5
Quality and Certification Page 6
Functioning Page 7
Product Detail & Ordering Information Page 8
Insect Screen Selector Page 9
For any further information about the above mentioned products
you can refer to the contact details on the last page
-
Introduction :
Insect Screen 3
612 Retractable Pleated Insect Screen
Protects against annoying insects
Provides an uninterrupted view
Ensures uncompromised ventilation and safety
-
Product Positioning and USPs :
Insect Screen 4
Super
Premium
Premium
Medium
Economy/Mass
The 612 Retractable Insect Screen falls under the super premium
category
1. Unmatched Strength : The screen is fitted with high strength
tension cords made from Vectran braids ( a patented product of
Brio) which run horizontally across the opening to: provide
stability to the screen control the vertical orientation of the
handle bar help prevent the mesh from blowing out of its
channels in windy conditions (wind test withstanding wind gusts
up to 30kph.)
2. Stability : The mesh has a 20mm wide pleat set at an angle of
45 degrees making it inherently more stable to sag than flat mesh
roller screens
3. Water Resistant & Provides UV Protection: The pleated
mesh is made up of the highest quality European PVC-coated
polyester which provides UV protection and is water resistant
Hfeles Insect Screen brings you the benefits of patented,
international technologies. Its Unique Selling Propositions (USPs)
make it an inimitable product in the Indian market :
-
Product Positioning and USPs :
Insect Screen 5
4. Post / Frame Less Corner Application : The 612 Retractable
Pleated Insect Screen is the only screen available in the market
which can be used for post/ frame less corner applications
5. Flexibility: Designed to be easily integrated into the
joinery frame
Only 30 mm channel depth
Low operating force that slides to any position along the
opening
-
Quality & Certification :
Insect Screen 6
Designed & assembled in Australia
Patent protected cassette adjustment system
Tested to over 150,000 cycles
5 years limited warranty
Brio is certified to quality management system AS/NZ ISO 9001 :
2008
-
Functioning :
Insect Screen 7
When not in use, the screen can be discretely refracted and
stacked way
-
Product Details & Ordering Information :
Insect Screen 8
Hfeles 612 Retractable Pleated Insect Screen is suitable for
windows, folding doors, sliding and French / Patio door
applications.
The insect screen is available in13 standard height ranges
starting from 800mm up to 3200mm high, each screen can be cut down
by up to 200mm
The screen has 6 standard width ranges, each screen reduces in
width to the size of the next smallest screen No Cutting
Required
The retracted stack width of the screens is as follows :
66 standard kits in total. Details of each kit are mentioned in
the Hfele Insect Screen selector
Each Standard Kit consist of Screen Kit and Channel Kit
All the kits are available as special orders
Freight on all air orders will be charged to the customer
additionally
Lead time to be given by the purchase team
-
Hfele Insect Screen Selector :
Insect Screen 9
How does this work ? If an insect screen with a height of 1900
mm and a width of 1100 mm is required, the appropriate article
number suiting this need would be 976.02.06101. The total MRP
(excluding freight) would be an addition of the MRP of the screen
kit and the channel kit, i.e. 37980 + 9369 = 47349. Therefore the
MRP of article number : 976.02.06101 is INR 47349/-
-
10
Contact Details :
Insect Screen
You can contact us on : 044-243127479840723284
or email us on : [email protected]
-
Insect Screen 11
Thank You
Untitled
