BODY & PAINT EXPERT

BODY & PAINTEXPERT#01

Complete competence in accident repairs

B&P EXPERT #012 GERMAN TOP QUALITY | WWW.WUERTH.MY

CONTENTS

Repairing

Welding

Sanding

Sealing & Painting Preparation

Polishing

Personal Protective Equipment

4 - 29

30 - 37

38 - 43

44 - 53

54 - 61

62 - 67

3B&P EXPERT #01GERMAN TOP QUALITY | WWW.WUERTH.MY


1 REPAIRING



SENSETIVE TRIGGER FOR GOOD SPEED CONTROL

• Especially lightweight, handy drill with quick-action drill chuck• Right/left changeover with 10 mm drill chuck• Lightweight and compact design, low-vibration• Integrated silencer for reduced noise• Precision planetary gearbox

Art No. 07037960PNEUMATIC DRILL DBM 10-RL PLUS

• 1x Ø 3 - 14 mm• 1x Ø 5 - 20 mm• 1x Ø 16 - 30.5 mm

Art No. 0694 024 01HSS SHEET METAL CONICAL DRILL BIT SET

23 STAGE TORQUE ADJUSTMENT FOR OPTIMUM THROUGHPUT

• The electronic motor protection function switches the motor off ahead of time in the event of blockage, overloading or overheating.• Efficient, low-maintenance, brushless EC motor with power reserves. • LED light on the battery block

Art No. 57018002CORDLESS DRILL DRIVER ABS 18 COMPACT, M-CUBE®


TWIST DRILL BIT HSS DIN 338 TYPE RN 130O

Art. No. Diamater (mm)

Length (mm)

Chip Flute Length (mm)

0624 000 100 1.0 34 12

0624 000 150 1.5 40 18

0624 000 200 2.0 49 24

0624 000 250 2.5 57 30

0624 000 300 3.0 61 33

0624 000 350 3.5 70 39

0624 000 380 3.8 75 43

0624 000 400 4.0 75 43

0624 000 450 4.5 80 47

0624 000 480 4.8 86 52

0624 000 500 5.0 86 52

0624 000 550 5.5 93 57

0624 000 600 6.0 93 57

0624 000 630 6.3 101 63

0624 000 650 6.5 101 63

0624 000 680 6.8 109 69

0624 000 700 7.0 109 69

0624 000 750 7.5 109 69

0624 000 800 8.0 117 75

0624 000 850 8.5 117 75

Art. No. Diamater (mm)

Length (mm)

Chip Flute Length (mm)

0624 000 900 9.0 125 81

0624 000 950 9.5 125 81

0624 001 000 10.0 133 87

0624 001 050 10.5 133 87

0624 001 100 11.0 142 94

0624 001 150 11.5 142 94

0624 001 200 12.0 151 101

0624 001 250 12.5 151 101

0624 001 300 13.0 151 101

0624 001 350 13.5 151 101

0624 001 400 14.0 160 108

0624 001 450 14.5 169 114

0624 001 500 15.0 169 114

0624 001 550 15.5 178 120

0624 001 600 16.0 178 120

0624 001 650 16.5 184 125

0624 001 700 17.0 184 125

0624 001 750 17.5 191 130

0624 001 800 18.0 191 130

0624 001 850 18.5 198 135

0624 001 900 19.0 198 135

0624 001 950 19.5 205 140

0624 002 000 20.0 205 140

• 1x 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10 mm

Art No. 0624 000 001

TWIST DRILL BIT HSS DIN 338 TYPE RN 130O

ASSORTMENT, 19PCS

• 1x Ø 3 - 14 mm• 1x Ø 5 - 20 mm• 1x Ø 16 - 30.5 mm

Art No. 0694 025 01TITANIUM NITRADE HSS SHEET METAL CONICAL DRILL BIT SET


2000W FOR DISCS UP TO 180MM DIAMETER

• Handle can be placed in three different positions• Large spindle lock-up push button• Automatic cut-off carbon brushes• Rubber grip handle• Anti-vibration side handle

Art No. 5717022130ANGLE GRINDER EWS 20-180-CLASSIC

750W FOR DISCS UP TO 100MM DIAMETER

• The compact angle grinder offers an outstanding weight-performance ratio with its small grip size, ensuring low-fatigue work• Large spindle lock-up push button for an easier change of grinding wheels• Durable carbon brushes• Two-position side handle

Art No. 5717018130ANGLE GRINDER EWS 7-100-CLASSIC


CUTTING DISC FOR STAINLESS STEELDiameter Thickness Drill Hole Art No.100 mm 1 mm 16 mm 0669 230 101115 mm 1 mm 22.23 mm 0669 230 111115 mm 1.6 mm 22.23 mm 0669 230 116125 mm 1 mm 22.23 mm 0669 230 121125 mm 1.6 mm 22.23 mm 0669 230 126180 mm 1.8 mm 22.23 mm 0669 230 181

GRINDING DISC FOR STEELDiameter Thickness Drill Hole Art No.100 mm 4 mm 16 mm 0669 260 104100 mm 6 mm 16 mm 0669 260 106115 mm 6 mm 22.23 mm 0669 260 116125 mm 6 mm 22.23 mm 0669 260 126180 mm 6 mm 22.23 mm 0669 260 186180 mm 8 mm 22.23 mm 0669 260 188

GRINDING FLAP DISC FOR STEEL & STAINLESS STEELDiameter Drill Hole Grid Size Art No.100 mm 16 mm G120 0579 580 501100 mm 16 mm G40 0579 580 504100 mm 16 mm G60 0579 580 506100 mm 16 mm G80 0579 580 508

CUTTING DISC FOR STEELDiameter Thickness Drill Hole Art No.100 mm 2.5 mm 16 mm 0669 201 025115 mm 2.5 mm 22.23 mm 0669 201 155125 mm 2.5 mm 22.23 mm 0669 201 255180 mm 2.5 mm 22.23 mm 0669 201 825


SMALL YET HIGH-POWERED

• For use in hard-to-reach areas• Safety cut-out• Restart protection• Thermal overload protection• Long service life• Insensitive to dust with coated field coil and winding protective grille

Art No. 07025200ELECTRIC STRAIGHT GRINDER GS 700-E

TOOL-FREE SPEED CONTROL

• Long-life, straight design, with rubberised handle to protect against vibrations• Effortless work and low vibration• Connection hose does not tangle• Rotating compressed air connection

Art No. 07032300PNEUMATIC ROD GRINDER DSG 25

SAFETY THROTTLE LEVER TO PREVENT ACCIDENTAL START UP

• Robust die grinder with aluminum alloy• Built-in regulator• Light weight and compact design for easy one-hand operation• Rear Exhaust directs air away from work surface

Art No. 07032290PNEUMATIC DIE GRINDER DSG 22


CARBIDE MILLING BIT, MX TEETH ASSORTMENT, 10PCS

CARBIDE MILLING BIT, MX TEETH ASSORTMENT, 5PCS

CARBIDE MILLING BIT, ALUMINIUM TEETH ASSORTMENT, 5PCS

• 1x Cylindrical Shape with Spur Cut, 6mm• 1x Cylindrical Shape with Spur Cut, 9.6mm• 1x Cylindrical Shape, 6mm• 1x Cylindrical Shape, 9.6mm• 1x Ball Shape, 6mm• 1x Ball Shape, 9.6mm• 1x Drop Shape, 12mm• 1x Flame Configuration, 12mm• 1x Ogive Shape, 6mm• 1x Ogive Shape, 9.6mm

Art No. 0616100

• 1x Cylindrical Shape with Spur Cut, 9.6mm• 1x Cylindrical Shape, 9.6mm• 1x Ball Shape, 9.6mm• 1x Ogive Shape, 9.6mm• 1x Cone with Rounded End, 10mm

Art No. 0616500000

• 1x Cylindrical Shape with Spur Cut, 6mm• 1x Cylindrical Shape with Spur Cut, 12mm• 1x Cylindrical Shape, 12mm• 1x Semicircular Shape, 6mm• 1x Semicircular Shape, 12mm

Art No. 0616800000


ADJUSTABLE SAW BLADE POSITION, 45° & 90°

• Ergonomic, aluminium die cast metal bow saw• Extremely robust and highly scratch-resistant• Thanks to high-quality, high-pressure die-cast aluminium saw bow• Prevents hand slipping from saw• Rapid blade tensioning and replacement

Art No. 5760 071 001METAL BOW SAW

610MM LENGTH

• Oval steel pipe, painted• Clamping lever• Includes raker tooth blade

Art No. 0609 310BOW SAW

250MM LENGTH

• With universal small saw blade, 32 teeth per inch, 145 x 6 x 0.45 mmArt No. 06091SMALL BOW SAW


BI-METAL SAW BLADE HSS

JIGSAW BLADE

SABRE SAW BLADE

Length Thickness No. of teeth per inch Art No.

300 mm 0.63 mm 24 0603 300 13300 mm 0.65 mm 18 - 32 0603 301 13

• Tooth edges of fully hardened material make for unbeatable cutting performance and service life.• No saw blade offers more cutting performance and flexibility.• Work faster, longer and more economically with only one saw blade.

Version Working Length Teeth Spacing Art No.

Metal 63 mm 0.7 mm 0608 116 088Metal Multiblade 75 mm 1.2 - 2.6 mm 0608 116 123Stainless Steel 57 mm 1.4 mm 0615 250 14

Version Length Teeth Spacing Art No.Metal 150 mm 1.8 - 2.6 mm 0615 915 026Metal Demolition 150 mm 2.5 - 3.2 mm 0615 915 029Metal Multiblade 150 mm 1.8 - 3.2 mm 0615 915 030Metal Longlife & Speed 150 mm 1.4 - 1.8 mm 0615 915 148


DIN5241 GERMAN DESIGN

• Polished head• Phosphated surface

Art No. 071502 02 (210 mm)Art No. 071502 03 (250 mm)

PINCERS

1C CUTTER KNIFE WITH SLIDER

LEVERAGE SHEET METAL SNIPS FOR CONTINUOUS & SHAPED CUTS

• Rounded grip made from 2-component plastic prevents your hand from slipping• You can slide your finger over the lower handle when opening and closing the handle• Handle heights prevent the shears from slipping out of your hand• Cutting head made from special stainless steel, die-forged• Induction hardened cutting edges

Art No. 071303 100IDEAL SNIPS

• With automatic blade locking for convenient one-hand operation• High stability and precise blade guidance• Impact-resistant plastic handle and stainless steel blade guide• Comes with 3x Snap-Off Blade, Black

Art No. 071566 210

REAR COMPARTMENT FOR STORING SPARE BLADES

SNAP-OFF BLADEArt No. 071566 05 (Standard)Art No. 071566 053 (Sharp Black)• Width of knife blade: 18 mm• Blade length: 110 mm• Thickness of blade: 0.5 mm• Material: Steel

SAFE STORAGE DISPENSER


DOUBLE PLANISHING HAMMER

ROLL-HEAD PRY BAR

SCREW CLAMP, MALLEABLE CAST IRONMax Clamping Width Overhang Art No.160 mm 80 mm 0714 673 116200 mm 100 mm 0714 673 120250 mm 120 mm 0714 673 125300 mm 120 mm 0714 673 130600 mm 120 mm 0714 673 160800 mm 120 mm 0714 673 180

LONG TYPE

• Length of head: 160 mm• Face diameter (hammer) (Ø): 33 mm• Peen length x peen width: 36 x 10 mm• Hammer weight: 500 g• Material: Hardened steel• Material of the grip handle: Hickory• Length of handle: 320 mm

Art No. 071574 20

PERFECT FOR PRYING IN CONFINED SPACES

• Material: Chrome Vanadium Steel• Length: 400 mm• Shaft diameter (Ø): 14 mm

Art No. 071574 46

MAX CLAMPING UP TO 47MM

• Effortless release lever with spring mechanism• One-hand operation – pull-action instead of push-action• Lock nut for fixing clamping width, setting retained for repetitive applications• High-quality epoxy coating, welding beads roll off• 10x better rust resistance than nickel coating

Art No. 071509 26LOCKING PLIERS


• 1/2 inch• 1x Ratchet• 1x T-Handle• Socket Wrench, Hexagon Sizes 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 26, 27, 28, 30, 32 mm• Extension Sizes 125; 250; 457 mm• 1x Cardan Joint• Socket wrench insert, EX TX Sizes E 10; 11; 12; 14; 16; 18; 20; 24• Socket wrench insert, TX Sizes TX 20; 25; 27; 30; 40; 45; 50; 55; 60• Socket wrrench insert metric, hexagon Sizes 4; 5; 6; 7; 8; 9; 10; 12; 14; 17; 19 mm

7 DRAWER COMPACT WORKSHOP TROLLEY

Art No. 0965 905 9221/4" & 1/2" SOCKET WRENCH ASSORTMENT (CF), 109PCS

Art No. 0962 615 710• Trackless rubber steering wheels with locking brake• Central locking with cylinder lock• One-handed unlocking and individual drawer locks prevent drawers from accidentally opening while in motion. Only one drawer can be opened at a time.• Ball bearing-mounted fully extending drawers

CRASH PROTECTION MADE OF ELASTIC FOAM RUBBER PROTECTS AGAINST IMPACT DAMAGE

• 1/4 inch• 1x Screwdriver Hexagon• 1x Ratchet• 1x T-Handle• Socket wrench, metric, hexagon, short: Sizes 5; 5.5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm• Socket wrench, metric, hexagon, long: Sizes 6; 7; 8; 9; 10; 11; 12; 13; 14 mm• Extension Sizes 100 & 250 mm• 1x Cardan Joint• 1x Connector for 3/8 Inch• 1x Bit Adapter• 1x Angled Extension 75mm• Socket wrench insert, EX TX Sizes E 4; 5; 6; 7; 8; 10; 11• Socket wrench insert, TX Sizes TX 8; 9; 10; 15; 20; 25; 30; 40• Socket wrrench insert metric, hexagon Sizes 3; 4; 5; 6; 8 mm• Socket wrench insert, Slotted Sizes 0.6x3.5; 1.0x5.5; 1.2x6.5; 1.2x8.0 mm• Socket wrench insert, PH Sizes PH 1; 2; 3


Art No. 0965 900 9281/4" & 1/2" SOCKET WRENCH ASSORTMENT, 92PCS

• 1/2 inch• T-Handle• Cardan joint• Ratchet• Extension 125; 250 mm• Socket wrench, metric, hex.: Sizes 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 26, 27, 28, 30, 32 mm• Socket wrench inserts, EX TX: Sizes E 14; 16; 18; 20; 24• Socket wrench inserts, TX: Sizes TX 40; 45; 50; 55; 60• Socket wrench inserts, metric hex Sizes 5; 6; 7; 8; 10; 12; 14; 17; 19 mm

• 1/4 inch• Screwdriver• Bit Connector• TX bit TX 6• TX bit with hole Sizes TX 8; 9; 10; 15; 20; 25; 27; 30; 40• Ratchet• T-Handle• Socket wrench, metric, hexagon: Sizes 4; 5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm• Socket wrench inserts EX TX Sizes E 4; 5; 6; 7; 8; 10; 11• Socket wrench insert, metric, hex Sizes 4; 5; 6; 8 mm• Cardan joint• Extension: 152 mm• Socket wrench inserts, slotted Sizes 0.6x3.5; 1.0x5.5; 1.2x8.0 mm• Socket wrench inserts, PH Sizes PH1; PH2; PH3

Art No. 0965 900 9213/8" SOCKET WRENCH ASSORTMENT, 103PCS

• Socket wrench TX 45 & TX 50• Socket wrench inserts, hex.: Sizes 3; 4; 5; 6; 7; 8; 9; 10 mm• Slotted Bit Sizes 0.5x3; 0.6x4.5; 0.8x5.5; 1.0x6.0; 1.2x6.5; 1.2x8.0• PH Bit Sizes PH1; PH2; PH3• Hexagon Socket Bit Sizes 3; 4; 5; 6 mm• TX Bit Sizes 10; 15; 20; 25; 30; 40• Ratchet• Cardan Joint 10; 11; 12; 13; 14; 15; 55 mm• Socket Wrench Hex. Short Sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21; 22 mm• Socket Wrench Hex. Long Sizes 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 21 mm• Extension 75; 125; 250 mm• Connector for 1/2 & 1/4 Inch• Quick change chuck for bit• Flexible Joint Head Ratchet• Socket wrench insert for EX TX Head Sizes E 5; 6; 7; 8; 10; 11; 12; 14• Socket Wrench insert for TX Screw Sizes TX 15; 20; 25; 27; 30; 40


3/8" & 1/4" SOCKET WRENCH ASSORTMENT, 91PCSArt No. 0965 900 903

• 3/8 inch• Extension: 75, 125, 250 mm• Cardan joint• Ratchet• Socket wrench inserts, hex.: Sizes 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22 mm• Socket wrench inserts, outer TX: E5, 6, 7, 8, 10, 11, 12, 14 mm• Socket wrench inserts, inner TX: TX 15, 20, 25, 27, 30, 40, 45, 50 mm• Socket wrench inserts, long: Sizes 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21 mm

• 1/4 inch• Socket wrench insert, hex.: Sizes 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm• Socket wrench inserts, outer TX: 4, 5, 6, 7, 8, 10, 11 mm• Socket wrench inserts, inner TX: E 8, 9, 10, 15, 20, 25, 30, 40 mm• Ratchet• Cardan joint• Extension: 75, 100, 250 mm• Socket wrench inserts, long: Sizes 6, 7, 8, 9, 10, 11, 12, 13, 14 mm• Connector 1/4 inch to 3/8 inch• Connector 3/8 inch to 1/4 inch

1/2" SOCKET WRENCH ASSORTMENT, 23PCSArt No. 0965 900 202• Socket wrench inserts; hexagon, sizes 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22; 24; 26; 27; 28; 30; 32 mm• 130 mm and 250 mm extension• 1x Cardan joint• 1x Ratchet 1/2 inch

Art No. 0965 905 2101/4" SOCKET ASSORTMENT (CF), 16PCS

• 1x 10 mm• 1x 11mm• 1x 12 mm• 1x 13 mm• 1x 14 mm• 1x 15 mm• 1x 16 mm• 1x 17 mm

• 1x 18 mm• 1x 19 mm• 1x 21 mm• 1x 22 mm• 1x 24 mm• 1x 27 mm• 1x 30 mm• 1x 32 mm


STRIKING TOOL ASSORTMENT (CF), 13PCS

• 6x7 mm• 8x9 mm• 10x11 mm• 12x13 mm• 14x15 mm • 16x17 mm

Art No. 0965 905 405DOUBLE RING DEEP OFFSET WRENCH ASSORTMENT (CF), 12PCS

• 18x19 mm• 20x22 mm• 21x23 mm• 24x27 mm• 25x28 mm• 30x32 mm


Art No. 0965 905 407FLEXIBLE RATCHET COMBI ASSORTMENT (CF), 8PCS

• Combination Wrench Sizes 6; 7; 8; 9; 10; 11; 12; 13; 14; 15; 16; 17; 18; 19; 20; 21; 22 mm• Double Open-End Wrench Sizes 6x7; 8x9; 10x11; 12x13; 14x15; 16x17; 18x19; 20x22; 24x27; 30x32 mm• Double Ring Wrench Sizes 6x7; 8x9; 10x11; 12x13; 14x15; 16x17; 18x19; 20x22 mm• 1x Open Double Ring Flexible Joint 11mm

Art No. 0965 905 912COMBI WRENCH ASSORTMENT (CF), 36PCS

COMBINATION WRENCH ASSORTMENT, 17PCSArt No. 0965 900 401• 1x 6 mm• 1x 7 mm• 1x 8 mm• 1x 9 mm• 1x 10 mm• 1x 11 mm• 1x 12 mm• 1x 13 mm• 1x 14 mm



SCREWDRIVER ASSORTMENT, 25PCSArt No. 0965 900 915• Slotted screwdriver, 0.6x3.5.80mm• Slotted screwdriver, 1x5.5x100mm• Slotted screwdriver, 1.2x7x125mm• Slotted screwdriver, 1.6x9x150mm• Short round screwdriver, Slotted, PH1, PH2• T-handle socket wrench, 10, 13mm• T-handle wrench, hexagon blade with side tip, 5, 6, 8mm• PH screwdriver, PH1, PH2, PH3• Precision screwdriver flat slotted, 0.4x2.5x75mm• Allen key with ball head, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm

• 1x Screwdriver with flexible shaft 6 mm & 7 mm• 1x PH2x25• 1x PH1x80• 1x PH2x100• 1x PH3x150• 1x Slotted 0.6 x 3.5 mm• 1x Slotted 0.8 x 4 mm• 1x Slotted 1 x 5.5 mm • 1x Slotted 1.2 x 6.5 mm • 1x Slotted 2 x 12 mm

Art No. 0965 905 916SCREWDRIVER ASSORTMENT (CF), 21PCS

• 1x TX 6• 1x TX 7• 1x TX 9• 1x TX 10• 1x TX 15• 1x TX 20• 1x TX 25• 1x TX 27• 1x TX 30• 1x TX 40

• 1x PH1x80• 1x PH2x100• 1x PH2x25• 1x Slotted 1x5.5• Screwdriver with flexible shaft 6 & 7 mm• 1x TX 6• 1x TX 7• 1x TX 8• 1x TX 9

Art No. 0965 905 923SCREWDRIVER ASSORTMENT (CF), 18PCS

• 1x TX 10• 1x TX 15• 1x TX 20• 1x TX 25• 1x TX 27• 1x TX 30• 1x TX 40• 1x TX 45

Art No. 0965 900 943PISTOL GRIP RATCHET MAGAZINE ASSORTMENT, 37PCS

• 1x Pistol screwdriver• Extension 70 & 150 mm• 1x 150 mm magnetic bit holder, • 1x 175 mm flexible bit holder• 1x Retractable magnet 105-485 mm• Socket wrench inserts: Sizes 4; 5; 5,5; 6; 7; 8; 9; 10; 11; 12; 13; 14 mm• PH & TX Bits: PH1; PH2; PH3; PZ1; PZ2; TX10; TX15; TX20; TX25; TX27; TX30; TX40; • Hexagon Socket Bits: 3; 4; 5; 6 mm • Slotted Bits: 0.8 x 5.5 & 1.2 x 8.0 mm


CIRCLIP PLIERS ASSORTMENT (CF), 25PCSArt No. 0965 905 917• 1x Power Side Cutters• 1x Combination Pliers• 1x Snipe Nose Pliers• 1x Water Pump Pliers• Circlip Pliers Type A, B, C, D• Allen Key Short Sizes TX 9; 10; 15; 20; 25; 27; 30; 40• Allen Key Extra Long Hexagon Sizes 1.5; 2; 2.5; 3; 4; 5; 6; 8; 10 mm

STRIKING TOOLS MIX ASSORTMENT, 19PCSArt No. 0965 900 918• 1x Locking pliers• 1x 1/2 inch impact socket, 17mm• 1x 1/2 inch impact socket, 19mm• 1x Seal scraper• 1x Flat chisel, 18mm• 1x Flat chisel, 22mm• Pin Punch 2, 3, 4, 5, 6, 8mm

• 1x Measuring tape• 1x Telescopic magnet• 1x Magnetic lifter• 1x Car tester• 1x Brake calliper brush• 1x Soft face hammer• 1x Machinist hammer

CIRCLIP PLIERS SET, 25PCS

Art No. 0965 900 600PLIERS ASSORTMENT, 4PCS

• Side cutter 160 mm• Combination pliers 180 mm• Snipe nose pliers 210 mm• Water pump pliers 250 mm

• 1x 4 mm• 1x 5 mm• 1x 6 mm• 1x 7 mm• 1x 8 mm• 1x 10 mm• 1x 12 mm

Art No. 0965 905 2071/2" TX SOCKET LONG ASSORTMENT (CF), 12PCS

• 1x TX 40• 1x TX 45• 1x TX 50• 1x TX 55• 1x TX 70


• 1x Seal Scraper• 1x Flat Blunt File• 1x Triangular File• 1x Half Round File• 1x Round File• 1x Square File• 1x Triangular Spoon Scraper• 1x Triangular Hollow Scraper• 1x Flat Scraper

Art No. 0965 905 802FILES & SCRAPERS ASSORTMENT (CF), 9PCS

Art No. 0965 905 703• 1x Flat Chisel 125 mm • 1x Flat Chisel 150 mm• 1x Cross Cut Chisel 125 mm• 1x Centre Punch 2 mm tip• 1x Centre Punch 3 mm tip• 1x Drift Punch 2 mm tip• 1x Drift Punch 4 mm tip

• 1x Pin Punch 2 mm tip• 1x Pin Punch 3 mm tip• 1x Pin Punch 4 mm tip• 1x Pin Punch 5 mm tip• 1x Pin Punch 6 mm tip• 1x Machinist Hammer 500 g

STRIKING TOOL SET (CF), 13PCS


THERMO TACKER WTG 40

• Suitable for practically all types of plastic.• Weather-resistant repair work• Energy-saving• Comes with 25x of each Stainless Steel Staple Shape U, Shape S & Shape V

HOT STAPLER FOR SIMPLE, COST-EFFECTIVE REPAIRS OF PLASTIC PARTS

Art No. 07022060

STAPLE FOR THERMO TACKER WTG 40

• Diameter: 0.8 mm• Width: 15 mm

MADE OUT OF STAINLESS STEEL

Art No. 0702206003 (Shape U)Art No. 0702206004 (Shape S)Art No. 0702206005 (Shape V)

*Shape U*Shape S

*Shape V


Figure Name Art No. OEM Part No. OEM VehicleSheet-metal nut, type 1NUT-SHT-BMW-(A3A)-L16,5MM-D4,2MM

050011362 07129925709 E81, E82, E87, E88, E36, E46, E90, E91, E92, E93, E34, E39, E60, E61, E32, E38, E65, E66, F01, F02, X3, X5, Z3, Z4

Plastic blind rivet, type 1MP-BMW-BLINDRIV-PLA-BLACK

0501105124 51218205295 E90, E91, X3, X5, X6, Z4

Sheet-metal nut, type 1NUT-SHT-BMW-(A3A)-L24,8MM-D6,5MM

050011369 - BMW Universal

Plastic expanding rivet, type 3MP-BMW-EXPNDRRIV-PLA-BUMPER-PA6.6-BLACK

0501105064 51111908077 E30, E32, E34, E36, E38, E39, E46, X5, E60, E65, E66, E67, Z4, Z3 MINI: R50, R52, R53, R56

Sheet-metal nut, type 1NUT-SHT-BMW-(A3A)-L20,8MM-D5,5MM

050011577 07129925720 BMW Universal

Plastic expanding rivet, type 1EXPNDRRIV-PLA-VW/AUDI-OPEL-(7,9-8,5MM)

0501101000 16186729901C Audi 80, Audi 100, Audi 200, A2, A3, A4, A6, A8, Beetle, Bora, Scirocco, Golf, Polo, Transporter, Jetta


Figure Name Art No. OEM Part No. OEM VehicleClamp ring, type 2MP-VW/AUDI-CMLP-WASHER-(GE3)-SILVER

0501101624 N90796501 VW/Audi Universal

Clamp ring, type 2MP-VW/AUDI-QCKY-F.T/BOLT-5X30MM

0501101649 N90335004 A4, Audi TT, Bora, Golf, Jetta, LT, Beetle, Passat, Polo, Trans-porter

Plastic expanding rivet, type 1EXPNDRRIV-PLA-MB-(5,0-5,5MM)

050052314 A0009903492 Mercedes-Benz Universal

Plastic expanding rivet, type 3EXPNDRRIV-PLA-MB/BMW

0500201404 A2019900292 Mercedes-Benz Universal

Percussion rivet, type 2SPRDRRIV-PLA-DATSUN/NISSAN-BLACK

0501132003 01553-09321 Nissan X-Trail

LOOKING FOR A DIFFERENT TYPE OF BODY CLIP? CHECK OUT OUR FULL RANGE OF OEM BODY CLIPS & CLAMPS CATALOGUE ON OUR E-SHOP WWW.WUERTH.MY OR WURTH APP!


WINDSCREEN REMOVAL SET

• Comprehensive removal tool kit allows operation by only one person• PE cutting cord and trim protector, the inner panelling does not need to be removed

FOR EASY AND LOW-LABOUR REMOVAL OF GLUED WINDSCREENS WITH ROBUST PE CUTTING CORD

Art No. 071458 230

1 2

5 6


Checkout how easy it is to use this kit!

• 1x Universal Magnetic Holder• 1x Mounting Hook• 1x Mounting Wedge• 1x Wire Feeder• 1x Interior trim protector• 1x Cutting Cord, 65m• 1x 1C Cutter Knife• 1x Removal Device

3 4

7 8


CUT PROTECTION GLOVE TIGERFLEX W-230 LEVEL C

• Nitrile foam-coated palms with additional nitrile "Tiger" grip• Breathable, good grip, comfortable to wear• Optimal fit and outstanding tactile and touch sensitivity

EXTREMELY COMFORTABLE CUT PROTECTION GLOVE FOR WORKING WITH GLASS & SHARP OBJECTS

Art No. 0899451358 (Size 8)Art No. 0899451359 (Size 9)

VACUUM LIFTER, 2PCS

• Two mobile heads with 120mm diameter• Windscreens can be secured using belts thanks to slots in handles

STRONG WINDSCREEN VACUUM LIFTERS UP TO 45KG

Art No. 071458 20

WINDSCREEN STAND

• Length: 1150 mm• Width: 500 mm• Collapsible and height-adjustable from 0.8 to 1 m• Robust tubular steel frame, powder coated

CROSS TUBING COVERED IN SOFT PADDING TO PROTECT THE WINDSCREEN

Art No. 071458 261


PNEUMATIC CARTRIDGE GUN, AIRQUICK

• For 400 ml bag goods and 310 ml cartridges• Fast extrusion• Adjusting the rotating pressure regulator on the handle enables fine adjustment of the flow speed

EFFORTLESS & QUICK APPLICATION OF WINDSCREEN ADHESIVE

Art No. 0891700310

ACTIVE GLASS CLEANER, 500MLArt No. 089025

WINDSCREEN SEALANT TROPICS +, 310ML

• A fast-curing, cold-applied primeless bonding windshield adhesive• One-part polyurethane, cured by reaction with atmospheric moisture• Short cut-off string, avoid unnecessary cleaning• Good non-sag characteristics

1-COMPONENT PRIMERLESS WINDOW ADHESIVE WITH EXCELLENT STABILITY & SHORT DRIVE-AWAY TIME

Art No. 0890026110

• No running off vertical surfaces• Extremely high degree of cleaning• When the foam bubbles burst, highly concentrated, active cleaning agents are transported directly to the dirt• Outstanding dirt dissolving power

ACTIVE FOAM FORMULA EASILY ATTRACTS STUBBORN DIRT FOR EASY CLEANING


2 WELDING



• Resists heat, flames and sparks• Reinforced thumb• Sewn with Kevlar thread for reinforcement• Reinforced thumb• Made of oxhide

ROBUST MADE FROM FULL-GRAIN COWHIDE

• Full-grain cowhide palms• Split leather backs and cuffs• Very rugged and hard-wearing• Repellent to oil, grease and water

Art No. 5350 050 010WELDING GLOVE W-100

SHORT SHAFT WITH FLEECE LINING FOR COMFORTABLE MOVEMENT

Art No. 0984 310 001WELDING GLOVE, HEAT

AUTO DARKENING SOLAR-POWERED WELDING HELMET, UK SOLAR 9-13

WELDING GLOVE, PRO

• Comfortable four-way adjustable headband• Automatic mode for individualised and automatic adjustment of the protection level• Smoke-repellent design• Protects against weld spatter and heat and protects during overhead welding• Lightweight and extremely comfortable

Art No. 0984 700 200

WITH PADDED ANTI-SWEAT HEADBAND

• Cowsplit leather shell• Jersey palm lined and black drill cuff lined• Kevlar stitching• 406,4 mm length• Wing thumb, red piping

WITH ADDITIONAL PALM REINFORCEMENT

Art No. 0984 310 002


WELDER'S GAITERS

WELDER'S APRON, SHEEPSKIN

56CM LENGTH

• Made from split leather• Split leather sleeve to connect to the shoulder area• With a drawstring around the wrist• Colour: natural

Art No. 0984 318WELDER'S ARM PROTECTION

40CM LENGTH

• Made from split leather• With sole and stirrup• With two buckled belts

Art No. 0984 317

IDEAL PROTECTION AGAINST CUTS AND FRICTION WEAR

• With chest flap• Length: 100 cm• Width: 80 cm• Universally adjustable leather straps• Rough surface

Art No. 0984 312

WELDER'S APRON, LEATHER

THE SMOOTH SURFACE MAKES IT RESISTANT TO FLYING SPARKS, WELDING BEADS, LIQUID STEEL AND ALUMINIUM

• With chest flap• Length: 100 cm• Width: 80 cm• Universally adjustable leather straps

Art No. 0984 313


HIGH-TEMP PROTECTIVE BLANKET, HTD 900Art No. 0984 3503 (1500x1000 mm)Art No. 0984 35010 (3000x2000 mm)• To protect sensitive components during welding and soldering work• Resistant to sparks, cinders, welding beads• Asbestos-free• Max temperature resistance of 750°C

MAX SHORT-TERM TEMP RESISTANCE OF 900°C

HIGH-TEMP PROTECTIVE BLANKET, HTD 1000Art No. 0984 3501 (500x330 mm)Art No. 0984 350 (1500x1000 mm)Art No. 0984 3500 (3000x2000 mm)• To protect delicate components during welding and soldering work• Suitable for extreme conditions• Resistant to sparks, cinders, welding beads and incandescent materials• Asbestos-free• Max temperature resistance of 850°C

MAX SHORT-TERM TEMP RESISTANCE OF 1000°C


• Protects non-participants from harmful effects of optical radiation to the skin and eyes• Protectes nearby vehicles & people against weld spatter, slag & sparks• Risk factor < 1• Degree of reflection: 230 to 400 nm < 10%• Wall: W x H: 200 x 190 cm, Curtain: W x H: 205 x 180 cm

FLAME-RETARDANT, SPARK & CHEMICAL RESISTANT SUITABLE FOR WELDING, GRINDING & PAINTING

Art No. 0984 770PORTABLE WELDING PROTECTION WALL


• 1x Universal key• 1x Tip cleaner for welding tips• 1x Ignition gun• 1x Heating nozzle

• Digitally controled new technology IGBT inverter for MIG welding. • 2 in 1 welding modes - MIG and STICK (electrode)• No GAS function provides outdoor work with gasless welding wire• Heat insulation class „H“ – electric components can work at temperatures up to 180°C• IGBT tehnology provides continual welding under unstable voltage

Art No. 5952001250MIG WELDING INVERTER MIG/MAG 250

STEPLESS INDUCTION ADJUSTMENT PROVIDES GOOD LOOKING WELD SEAM WITH MINIMUN SPATTERING

WELDING & CUTTING TORCH SET

• Shank Ø 17 mm• 1x Handle• 1x Cutting torch• 1x Spring lever guide carriage, circular. • 1 of each cutting tip 3–10mm, 10–25mm, 25–40mm• 1 of each welding attachments 1.0–2.0mm, 2.0–4.0mm, 4.0–6.0mm, 6.0–9.0mm

FOR 1.0–9.0 MM WELDS AND 3–40 MM CUTS

Art No. 0984 017

• 1x Propane handle• 1x Connection pipe 600 mm• 1x Cutting head 60 mm• 1x Low-pressure regulator with combi-connection

IDEAL FOR WELDING ALL BITUMINOUS ROOFING AND WATERPROOFING MEMBRANES, AS WELL AS FOR SURFACE DRYING

Art No. 0984 898 50PROFESSIONAL PRE-HEATING SET FOR PROPANE

• 1x HP hose 3/8" LH at both ends x 5000 mm• 1x Hose-break protection 12 kg/h


• 1x Torch Neck• 1x Gas Nozzle Holder• 5x Contact Tip, 0.8 mm dia.• 5x Contact Tip, 1.0 mm dia.• 5x Contact Tip, 1.2 mm dia.• 1x Contact Tip for Aluminium Wire, 1.2 mm dia.• 360A CO2; 320A mixed gas M21 in accordance with DIN EN 439

SUITABLE FOR 0.6-1 MM WIRE DIAMETER

• 1x Retainng Spring• 1x Torch Neck• 1x Push-Button Ergo-Handle• 1x Contact Tip, 0.8 mm dia.• 1x Contact Tip for Aluminium Wire, 1.0 mm dia.• 180 A CO2; 150 A mixed gas M21 in accordance with EN 439, 60% switch-on time

Art No. 0984 160 130 (3m Hose Length)Art No. 0984 160 140 (4m Hose Length)

MIG/MAG HOSE PACK MB 15 AK

• 1x Spot Weld Gas Nozzle• 1x Gas Nozzle Holder• 1x Gas Nozzle, Conical• 1x Gas Nozzle, Cylindrical

SUITABLE FOR 0.8-1.2 MM WIRE DIAMETER

• 1x Retainng Spring• 1x Torch Neck• 1x Push-Button Ergo-Handle• 1x Contact Tip, 0.8 mm dia.• 1x Contact Tip for Aluminium Wire, 1.2 mm dia.• 230 A CO2; 200 A mixed gas M 21 in accordance with EN 439, 60% switch-on time

Art No. 0984 260 130 (3m Hose Length)Art No. 0984 260 140 (4m Hose Length)

MIG/MAG HOSE PACK MB 25 AK

• 1x Spot Weld Gas Nozzle• 1x Gas Nozzle Block• 1x Gas Nozzle, Conical• 1x Gas Nozzle, Cylindrical

SUITABLE FOR 0.8-1.6 MM WIRE DIAMETER

Art No. 0984 380 230MIG/MAG HOSE PACK ML 38, COMPLETE, 3M LONG

• 3x Gas Nozzle, Conical• 3x Gas Nozzle, Cylindrical• 5x Contact Tip for Aluminium Wire, 1.0 mm dia.• 5x Contact Tip for Aluminium Wire, 1.2 mm dia.

• Contributes towards optimum welding work. Starting points for corrosion are prevented• Does not spread & no running off verticle surfaces• Harmless when subsequently galvanising and painting• Cooling effect• The thin film simultaneously acts as temporary corrosion protection

PREVENTS BURNING-ON OF WELD SPLATTER ON METALS, VA MATERIALS AND ON WELDING TORCH NOZZLES

Art No. 0893 102 100WELDING SPRAY PERFECT, 400ML


3 SANDING



DRY SANDING DISC

DRY SANDPAPER DISC, RED PERFECT®

• Hook & Loop velcro• 15 Holes• Diameter 150 mm• Dust Free• High removal rate• Long service life • Highly flexibility

Grid Art No.40 0577 363 00460 0577 363 00680 0577 363 008100 0577 363 010120 0577 363 012150 0577 363 015

Grid Art No.800 0581 353 0801000 0581 353 1001200 0581 353 1201500 0581 353 1502000 0581 353 2002500 0581 353 250

• Hook & Loop velcro• 21 Holes• Diameter 150 mm• Highly tear-resistant plastic film• Quicker grinding times and effective operation with very positive results• Very high material removal rate• Extremely long service life

Grid Art No.180 0577 363 018220 0577 363 022240 0577 363 024320 0577 363 032400 0577 363 040500 0577 363 050

SANDPAPER, WATERPROOFGrid Art No.80 058411 80 100 058411 100120 058411 120150 058411 150180 058411 180220 058411 220240 058411 240280 058411 280320 058411 320360 058411 360400 058411 400600 058411 600800 058411 8001000 05841110001200 05841112001500 05841115002000 05841120002500 0584112500

• Synthetic Resin• 280 x 230 mm• Can be used without soaking• Extremely flexible grain carrier• Sharply contoured working• Outstanding finish• Excellent contact with the material and optimum grip• First-rate initial and long-term grinding performance with a long service life• Dense scattering


• Minimal vibrations for optimum sanding results and non-fatiguing operation• Drive features 3 balance points• Optimum dust extraction function• Extremely compact housing design• Ergonomic shape, handles beautifully.

PNEUMATIC ECCENTRIC OSCILLLATING DISC GRINDER DTS 152C

Art No. 07037531PNEUMATIC ECCENTRIC ROTARY SANDER DTS 150S

Art No. 07037521• 5-mm eccentric fitting (for roughening)• Powerful motor and bearing with dust protection• Minimal vibrations for optimum sanding results and non-fatiguing operation• Drive features 3 balance points• Optimum dust extraction function

Art No. 07021240ECCENTRIC DISC-TYPE SANDER ETS 150-E COMPACT

• The vibration level can be set for any application as required.• The rubberised, comfortable handle absorbs strong vibrations.• The 5 mm stroke of the eccentric grinder ensures high removal during use.• Longer service life & lower maintenance • The restarting protection prevents unintentional start-up after a power interruption.

VARIABLE SPEED FOR OPTIMUM ADJUSTMENT TO THE SANDING INSERT AND PAPER CHANGE

EXTREMELY POWERFUL FOR FINE & COARSE SANDING WITH CONTINUOUS SPEED CONTROL & SAFETY SWITCH-OFF

BRUSHLESS EC MOTOR PROVIDING LONGER OPERATING TIME & GREATER EFFICIENT RESULTS

Art No. 5964057800SMALL ABRASIVES ASSORTMENT, 32PCS

• 2x of each Flap Disc, G40; G60 & G80• 2x of each Segmented Grinding Disc G40; G60 & G80• 2x of each Fibre Disc G36; G40; G60 • 2x of each Fleece Disc Coarse; Medium; Fine; Nylon• 1x Mini Compact Fleece Disc Very Fine• 1x Mini Polishing Disc• 1x Bristle Disc G50• 1x Holder• 1x Pneumatic Hand-Held Sander DSW 15 (MASTER)


SPECIALLY FUSED ALUMINA SANDING TIP, PINK

Shape Diameter (mm)

Working Legnth (mm)

Total Length (mm) Grid Size Art. No.

16 32 72 46 068020

20 20 60 36 068021

10 10 50 60 068030

16 16 56 46 068031

13 20 60 46 068041

20 32 72 36 068042

20 25 65 36 068051

20 25 65 36 068061

10 13 53 60 068071

13 20 60 36 068072

20 6 46 46 068073

20 12 52 36 068074

20 30 70 36 068075

25 25 65 36 068076

32 16 56 30 068077

40 20 60 30 068078



4 SEALING & PAINTING PREPARATION



PLUG-IN FLOOR NOZZLEPLUG-IN SUCTION PIPE

WET AND DRY VACUUM CLEANER ISS 30-L AUTOMATIC

• Dust class: L-certification guaranteed dustcollection efficiency of 99%• Accessories can be stored on the device and are always ready to use• Integrated storage for the joint nozzle and tool sleeve with quick connections, flexible hose and power cable storage• Robust container with bumpers and large, sturdy metal rollers• Anti-static preparation• On/off, 15 s/60 s filter cleaning and speed control switch• Socket with Hall sensor for automatic power tool detection, this allows the vacuum cleaner to be controlled via a connected electric tool• Ensures long interruption-free operation• Low noise level• Long filter life• Low maintenance costs

Art No. 07011330

AUTOMATIC FILTER CLEANING SYSTEM BY AN AIR BLAST AT 15 OR 60 SECONDS INTERVALS

Art No. 0702400909

Art No. 0702400520 Art No. 0702400290

PLUG-IN CAR SUCTION NOZZLE

Art No. 0702400191FLAT FILTER, COATED

Art No. 0702400071FLEECE FILTER BAG


CLEANING BUCKET, 10L

Art No. 0899 700 400SPONGE

Art No. 0824 010 075• Plastic bucket with sponge basket and measuring gauge• Embossed fill level gauge• Chemical resistance to acids and alkalis

Art No. 0899 700 410COMBINATION SPONGE

• L x W x H : 14 x 9 x 6 cm• Composite material• Hard, yellow side loosens coarse dirt• Brown side absorbs fine dirt

• L x W x H : 18 x 13 x 6 cm• Cell structure with different pore sizes and shapes• Excellent cleaning• Promotes foaming• Actively absorbent• Non-scratch• Permanently elastic

MICROACTIVE CLOTH PROFESSIONAL

• 36X32CM• Extremely high cleaning power• Dust and fine dirt is attracted by static effect• Removes coarse and greasy dirt• Extremely fine, strong fibres• Excellent sliding properties• Binds dust on wood• Does not leave behind scratch marks• Washable up to 60°C

Art No. 0899900107


CREPE MASKING TAPE, 50MWidth Art No.18 099261924 099262530 099263036 099263848 0992650

• Heat resistant up to +110°C• Latex-proofed paper backing• Can be written on• Excellent adhesive strength and adaptability

FILLER VAKU 30, 2KGArt No. 089260302• No breakaway in edges with fine sanding• Optimum elasticity for achieving closed, smooth surfaces • Quick drying saving you time & easy to sand with minimal dust build-up• High filling power and a high degree of stability under load• Temperature-resistant up to 80°C

UNIVERSAL FILLER WITH OUTSTANDING PROPERTIES, CAN BE USED AS KNIFING AND FINE FILLER

FILLER VAKU 20, 2KGArt No. 089260202• Non-porous and closed filling• Quick drying saving you time & easy to sand with low dust-build up• Brilliant white pigmentation, optimum surface and preparation for top-coat paint• Temperature-resistant up to 80°C

FINE FILLER WITH HIGH ELASTICITY FOR SEALING PORES AND FOR REPAIRING SMALL SCRATCHES, GROOVES AND UNEVEN SURFACES

FILLER VAKU 50, 1KGArt No. 089260501• High degree of elasticity ideal for modelling and touching up contours• Excellent adhesion• Quick drying saving you time• Easy to sand• Temperature-resistant up to 80°C

ELASTIC CONTOUR FILLER, SPECIFICALLY FOR USE ON PAINTABLE PLASTIC PARTS


• Suitable for electrostatic application• Can be used for insulation purposes on thermoplastic surfaces• Colour FC 0006 = light grey

2-COMPONENT EPOXY HARDENER, 1KG

Art No. 58661041052-COMPONENT EPOXY PRIMER, 5KG

Art No. 5866402101• Contents: 1064 ml• Density: 0.94 g/cm³• Min. flashing point: 27 °C• VOC concentration (CH): 376.1 g/l

Art No. 58664001012-COMPONENT HS HARDENER FOR TOP COATS, 1L

• Suitable for partial and full paint• Density: 1.031 g/cm³• Density conditions: at 20°C• VOC concentration (CH): 477 g/l

PERFECTLY SUITED FOR USE WITH 2-COMPONENT EPOXY PRIMER

PRIMER THAT IS RESISTANT TO CHEMICALS WITH EXCELLENT ADHESION AND OUTSTANDING CORROSION PROTECTION PROPERTIES

PERFECTLY SUITED FOR USE WITH 2-COMPONENT HS ACRYLIC PAINT, CLEAR VARNISH & THICK COAT LACQUER

Art No. 58662011052-COMPONENT HS CLEAR VARNISH LACQUER REFLOW, 5L

• Resistant to micro-scratches/car wash facilities• Varnish flows together at micro-scratches due to UV radiation and heat• Brilliant clear varnished condition, optimum application• Ideal for painting over solvent and water-based paints

HIGH-SOLID ACRYLIC CLEAR VARNISH WITH INCREASED RESISTANCE TO SCRATCHES BASED ON REFLOW TECHNOLOGY


UNIVERSAL THINNER, 6L

• For adjusting the viscosity of paint products • Wide range of uses• Colourless• Min. flashing point: -18 °C• Density: 0.9 g/cm³

ACRYLIC THINNER, 5LArt No. 08234000• To dilute or to adjust the viscosity of 2-component top coats and 2-component clear varnishes for painting• Colourless• Min. flashing point: 25 °C• Density: 0.875 g/cm³

FOR ALMOST ALL SOLVENT-BASED PAINT AND PRIMER MATERIALS

SILICONE REMOVER, 1LArt No. 0893222• High level of cleaning power and long flash-off time• Ideal for cleaning plastic

PROFESSIONAL CLEANING AND DEGREASING BEFORE APPLYING ADHESIVES OR PAINTING

Art No. 08234406

FOR 2-COMPONENT ACRYLIC PRODUCTS & 1-COMPONENT THICK-FILM LACQUERS

RUST CONVERTER, 1LArt No. 0893110• Environmentally friendly dispersion-based rust converter, can be filled• Can be painted over with all commercially available top-coat paint systems after 3 hours• Rust converter penetrates into the rust, reacts with the rust and converts iron oxide into a stable, insoluble, blue-black, metal-organic complex.

RELIABLY STOPS THE CORROSION PROCESS AND PROVIDES AN OPTIMISED APPLICATION SURFACE FOR ADDITIONAL PAINT WORK


GRAVEL THROW UNDERBODY SEAL PROTECTION, BLACKArt No. 0892 075 200 (1L)Art No. 0892 075 250 (500ml Aerosol)• Rubber-based coating compound containing solvents, can be painted over• Excellent adhesion, quick skin formation• Scratch-resistant• Can be painted over &s uitable for oven drying briefly at 40°C to 60°C• Highly sandable once fully dry

RESTORING & PROTECTING AGAINST STONE CHIPS AND CORROSION

BOND + SEAL, WHITE, 300ML

• Bonding of identical and different substances possible such as metal, painted surfaces, wood, stone, concrete and plastic (polyester and hard PVC)• Absorbs vibrations and sounds• Long skin formation time• Can be ground/painted & not corrosive

HIGHLY ELASTIC PU ADHESIVE AND SEALANT WITH OUTSTANDING STRENGTH

Art No. 0890 1001

UNDERBODY PROTECTION GUN

• With variable spraying nozzle• Application pressure: 2-8 bar

PERFECT FOR UNDERBODY PROTECTION 1L CANISTERS

Art No. 08911060

MANUAL CARTRIDGE GUN ROBUST

• For applying max. 310 ml cartridges• Immediate force transmission to the push rod possible• Very robust housing and feed mechanism

PERFECT FOR BOND + SEAL 300ML CARTRIDGES

Art No. 0891318


REPLAST® EASY, 25SEC, 50ML

• Processing Time: 25 seconds• Colour: Black• Can be sanded and painted over after a very short period of time• Coarse sanding dust• High flexibility of the hardened adhesive

RAPID REPAIRING ATTACHMENT OF PLASTIC PARTS

Art No. 0893500041



RAPID REPAIRING OF SMALL HOLES IN PLASTIC PARTS

Art No. 0893500042



RAPID REPAIRING OF CRACKS IN PLASTIC PARTS

Art No. 0893500043

CAVITY WAX, TRANSPARENT, 500ML

• High permeability and excellent penetration• Water-displacing effect• High resistance to heat up to +180°C• Suitable for commercially available paints and rubber and plastic components• Corrosion protection even with low coating thickness including 50 µ

FOR LONG-LASTING PROTECTION OF AREAS IN VEHICLE BODY CAVITIES PRONE TO CORROSION

Art No. 0892 082 500


DOUBLE CARTRIDGE GUN

• Made of sturdy metal• Dosing, mixing and discharge of highly viscous two-component adhesives• Accurate and consistent dosage

PERFECT FOR REPLAST® EASY 50ML CARTRIDGES

Art No. 0891893485


5 POLISHING



P05 HIGH PERFORMANCE POLISH COMPOUND, 1LArt No. 0893150005

AP20+ MEDIUM CUT POLISH & SEAL, 1LArt No. 0893012001

AP10 HIGH CUT POLISH, 1LArt No. 0893469100

• Innovative powdered consistency made from aluminium oxide• Maximum efficiency thanks to unrivalled removal rate & excellent high-gloss properties• Thick consistency• Polish does not spray everywhere• Long lasting• Minimum dust creation

FOR VERY DEEP & STUBBORN SCRATCHES

• Innovative powdered composition made from aluminium oxide• Extremely high surface removal rate and unprecedented gloss level• Thick consistency• Polish does not splash• Low dust formation

FOR SEVERE SCRATCHES, ORANGE PEEL & TRAPPED DUST

• Combines a medium sharp polish with a protective and shiny layer of sealant• Contain PTFE, deep shine, ideally suited to refurbishing vehicles• Low dust formation & thick consistency• Specifically tailored powder consistency made from aluminium oxide• Moderate surface removal rate and very high gloss level

2-IN-1 POLISH FOR MEDIUM SCRATCHES & HOLOGRAMS WITH SHINY SEALANT

AP30+ LOW CUT POLISH & SEAL, 1LArt No. 0893469100• Unique powdered composition made from aluminium oxide• Fine removal with simultaneous unique mirror gloss• Thick consistency• Smooth the fine texturing in the paint• Bring deep shine and high gloss to surface

2-IN-1 POLISH FOR MINOR SCRATCHES & HOLOGRAMS WITH SHINY SEALANT


Severe scratches

HologramMinor scratches

Orange peel Trapped dust

Moderate scratches

Moderate scratchesBlue pad or lambskin

Hologram

AP10

Deep scratches Orange peel Trapped dust

P05

AP20+

AP30+

Paint sealing

Paint sealing


Select the polish and pads appropriate for the severity of the scratches and apply evenly in crossing movements.

AP10

Lambskin Wool (Extra Fine)Art. No. 0585 195Size: D195 mmHardness degree: Extra Extra hardColor: White

P05

AP20+

AP30+

WÜRTH POLISH PAD APPLICATION GUIDE

Art. No. 0585 24 155 Size: D150 x 25 mmHardness degree: Extra hardColor: White

Art. No. 0585 27 155 Size: D150 x 25 mmHardness degree: HardColor: Blue

Art. No. 0585 28 155 Size: D150 x 25 mmHardness degree: SoftColor: Black


AP40 PAINT SEAL, 1LArt No. 0893467001

SPRAY SHINE, 500MLArt No. 0893011500

GLOSS SEAL, 250MLArt No. 08930126

PREMIUM CARNAUBA WAX LEGENDARY, 200MLArt No. 0893014200

• Bring deep shine and high gloss to surface• Wax based sealing• Long-lasting protection

PERFECT PAINT SEALANT WITH LONG LASTING DEEP SHINE & GLOSS

• Provides lasting, reliable protection with extremely simple application• Resistant to weathering, salt, sunlight, cold cleaner and other influences• Is non-aggressive and therefore gentle on paints• Achieves an extremely smooth paint surface and protects for up to 18 months

EXTREMELY LONG LASTING & RESISTANT SEAL FOR A SMOOTH GLOSSY SURFACE FINISH

• Provides new and used cars with a high gloss in just minutes• Minimal time required• Vehicle looks like it has just been polished• Quick & efficient to use• Spray on and polish with a dry cloth

QUICK WITH A HIGH GLOSS MAKING THE VEHICLE LOOKING LIKE NEW

• The highest quality level with maximum carnauba wax content• The wax, handmade in small batch production, can be easily and effortlessly applied to the paint surface and creates an absolutely brilliant mirror finish• The crystal-clear protective layer ensures maximum water beading behaviour (Lotus effect) and protects the paint from the elements and scratching over months

CRYSTAL CLEAR PROTECTIVE WAX LAYER WITH WATER BEADING & MIRROR EFFECT


DUAL ACTION ECCENTRIC POLISHING MACHINE, EPM 50-150 CLASSIC

BACKING SUPPORT PLATE

HOLDERArt No. 0715 933 990

• Resitatnt to scratches and chemical agents• Multi compartments to place polish bottles, cloths, sponges, etc

Art No. 0586 999 996• 6 Inch• Soft Urethane molded• M8 thread• Multi-hole to reduce & maintain optimum temperature• Durable• Long hook & loop life

• Variable speed• Flexibility for a wide variety of applications• Lock-on Button• Less fatigue• Built-in speed stabilizer• Offer the constant speed output• Soft start• Eliminates wax and compound splash• Leading vibration elimination technology • Drastically reduces the operator’s fatigue• Angled grip hood• Rubberized, for a more comfortable operation

Art No. 5717042

ERGONOMICAL REDUCING FATIGUE WITH ADJUSTABLE SPEED & LOCK-ON BUTTON


• Stone chipping, UV rays and other mechanical influences cloud the surfaces of polycarbonate lenses over the years or leave behind scratches and traces.• Enables refurbishment of virtually all vehicle headlights• Gives new brilliancy• Minimises the risk of accidents

Art No. 5964 089 316 HEADLIGHT RESTORATION KIT

• 1x Pneumatic Mini Orbital Machine• 1x 1/4" Plug-In Nipple• 1x Velcro Support Plate, D75 mm• 1x Grinding Block, D75 mm• 5x ZEBRA® Sanding Disc Useit Superpad P240• 5x ZEBRA® Sanding Disc Useit Superpad P320• 5x ZEBRA® Sanding Disc Useit Superpad P400• 2x ZEBRA® Finishing Disc Useit Superpad G500• 3x ZEBRA® Finishing Disc Useit Superpad G1000• 3x ZEBRA® Finishing Disc Useit Superpad G2000• 3x ZEBRA® Finishing Disc Useit Superpad G4000• 1x Soft Foam Interface, D80 mm• 1x Velcro Support Plate, D80 mm• 2x Lambskin Polish Pad, D80 mm• 3x Orange Soft Polishing Pad, D90 mm• 1x Fast Grinding Polish P80, 250ml• 1x High-Gloss Polish P90, 250ml• 1x PC Primer, 250ml• 1x Rapid Two-Component Clear Varnish, 250ml• 1x Microactive Cloth Duo, 40x40 cm• 1x Precision Masking Tape, 38x50 mm• 1x Cleaning Brush• 1x Case

Kit Includes:

PROFESSIONAL 2-STAGE SYSTEM FOR REFURBISHMENT OF HEAVILY WEATHERED VEHICLE HEADLIGHTS


6 PERSONAL PROTECTIVE EQUIPMENT



FACE SHIELD

• Special geometry for extended protection of the upper head and chin• Large, resistant polycarbonate visor with wide field of view• Multiple visor inclination adjustment settings• Individual head strap adjustment• Soft padding on all parts with head contact

PERFECT PROTECTION FOR GRINDING AND CUTTING WORK, AS WELL AS AGAINST DRIPPING OR SPLASHING LIQUIDS

Art No. 0899101202

FACE SHIELD PRO GUARD

• Adjustable pin-lock for height adjustment and ratchet locking system• Allows flip-up visor to be positioned as user wishes• Stylish spherical shape polycarbonate visor• Provides excellent protection against impact, flying particles and liquid splash

Art No. 0899101225

FULL FACE SHIELD TO REDUCE THE RISK OF FACE AND FOREHEAD INJURIES

SCRATCH & IMPACT RESISTANT LENS

SAFETY GLASSES PREMIUM

SAFETY GLASSES

Art No. 0899 103 110 (Clear)Art No. 0899 103 111 (Tinted)Art No. 0899 103 112 (Yellow)Art No. 0899 103 113 (Brown)

Art No. 0899 103 120 (Clear)Art No. 0899 103 121 (Tinted)Art No. 0899 103 122 (Yellow)Art No. 0899 103 123 (Brown)

SCRATCH & IMPACT RESISTANT LENS WITH ANTI-FOG COATING


CORDED EAR PLUGS X-100Art No. 0899300332

EAR DEFENDER A812

• Foldable earmuff, sock resistant, durable• Soft foam ear cushions for comfort and secure fitting• Slide and swivel cup enhances comfort and fit

COMFORTABLE EARMUFFS FOR USE IN NOISY ENVIRONMENTS UP TO 31.3DB

Art No. 0899300361

EAR PLUGS X-100

• Very comfortable for maximum user acceptance• Closed surface prevents the penetration of foreign bodies and dirt particles in the plugs• Imprinted X shape provides soft and optimum adjustment to the ear canal & quick and simple to insert & remove correctly

Art No. 0899300331

ERGONOMIC EAR PLUGS FOR USE IN EXTREMELY NOISY ENVIRONMENTS UP TO 37DB

• Very comfortable for maximum user acceptance• Closed surface prevents the penetration of foreign bodies and dirt particles in the plugs• Imprinted X shape provides soft and optimum adjustment to the ear canal & quick and simple to insert & remove correctly

ERGONOMIC EAR PLUGS FOR USE IN EXTREMELY NOISY ENVIRONMENTS UP TO 37DB WITH SAFETY CORD

PROTECTIVE SUIT PRO COVERALL 5/6Art. No. Height Chest Size

0899 021 212 168 - 176 cm 92 - 100 cm M

0899 021 214 182 - 188 cm 108 - 116 cm XL

0899 021 216 194 - 200 cm 194 - 200 cm 3XL

ROBUST, ANTI-STATIC, TEAR RESISTANT PROTECTIVE SUIT IDEAL FOR WET & DRY


REVERSIBLE

NITRILE DISPOSABLE GLOVES, BLACKArt No. 0899 470 398 (Size M)Art No. 0899 470 399 (Size L)• Liquid-tight disposable nitrile glove• Food-safe• Silicone-free manufacturing process• Free of allergenic latex proteins• Powder-free

PAINTERS MASK SET, 8PCS

• 1x Half face mask HM 173 (with bayonet connection)• 2x Particle pre-filter for half face mask HM 173• 2x Gas filter for half face mask HM 173• 2x Filter holder for half face mask HM 173• Practical storage box

FILTER AGAINST GASES, VAPOURS, FINE DUST AND PARTICLES THAT OCCUR DURING PAINTING

Art No. 0899173100

FFP2 MASK WITH VALVE

• High level of comfort and low respiratory resistance• Flexible aluminium nosepiece• Soft inner fleece• Valve reduces exhalation resistance & makes it easier for moisture and heat to escape• Tear-resistant elastic textile straps

Art No. 0899121100

FFP1 MASK

• Lightweight and comfortable to wear• Flexible aluminium nosepiece• Soft inner fleece• Excellent filter performance with low breathing resistance• Tear-resistant elastic textile straps

PROTECTS AGAINST UP TO 4X THE LIMIT VALUE OF TOXIC PARTICLES, DIRT, DUST & SMOKE

Art No. 0899110400

PROTECTS AGAINST UP TO 10X THE LIMIT VALUE OF TOXIC PARTICLES, DIRT, DUST & SMOKE


• Robust protectors on the back of the hand and fingers• Shock-absorbing inserts in the palm• Specific reinforcements at areas placed under strain• Especially durable triple stitching on the palm• Great fit and high degree of user safety• Soft neoprene rip-tape fastening• Breathable, elasticated polyester fabric on the back of the hand

WITH AN INTEGRATED MAGNET ON THE BACK OF THE HAND

MECHANIC'S GLOVE PROArt No. 0899 400 749

• Floor stand for cleaning paper rolls with wheels and waste bag holder• Stable and durable• Suitable for all common wiper and cleaning rollers

EQUIPPED WITH CUTTING TEETH FOR PAPER ROLL & WASTE BAG HOLDER

CLEANING PAPER WALL HOLDER

CLEANING PAPER FLOOR STANDArt No. 0899 800 606

Art No. 0899 800 607• Wall mounted holder• For cleaning paper rolls with waste bag holder• Stable and durable• Suitable for all common wiper and cleaning rollers

EQUIPPED WITH CUTTING TEETH FOR PAPER ROLL & WASTE BAG HOLDER

• 36 x 38 cm• Fits all common dispensers• Virtually lint-free• Food-safe

CLEANING PAPER ROLL, 1000 SHEETS

HIGHLY ABSORBENT & TEAR-PROOF

Art No. 0899 800 773 (2 Ply)Art No. 0899 800 823 (3 Ply)

WORKSHOP PRO #1

© by Adolf Würth GmbH & Co.KGPrinted in Germany.All rights reserved.Content responsibility: GDA Dept./Melanie SchynolEdited by: GMV Dept./Heiko Honz

DOWNLOAD OUR WÜRTH E-SHOP APP NOW!

AVAILABLE ON BOTH APPLE APP STORE AND GOOGLE PLAY STORE

BODY & PAINT EXPERT #01

Wuerth Malaysia Sdn BhdLot 806, Jalan Subang 5,Taman Perindustrain Subang,47600, Selangor.T +60 3 8021 0190F +60 3 8021 [email protected]

We reserve the right, at any time without prior notice or notice, to make any product changes that we feel necessary. Images may be for illustration purposes only and that might differ in appearance from the delivered goods. All products and items are whilst stock last. We reserve the right for misprints where we assume no liability. The General Terms and Conditions apply.

wurth.my

Documents

BODY & PAINT EXPERT